Converting check_autoarg from a macro to a function lost the behavior. Instead,
just move the logic into p_rsa.c which was the only EVP_PKEY implementation
that even needed the flag.
Also document this behavior on each of the functions. Make note of the out =
NULL case only returning the maximum output size, and not necessarily the
actual size.
For testing, update example_sign to determine the signature size using the NULL
behavior rather than querying the RSA key.
Change-Id: Iec6c2862028a5cfdefe8faa0e8c471755070898a
Reviewed-on: https://boringssl-review.googlesource.com/1121
Reviewed-by: Adam Langley <agl@google.com>
Building without RSA support is unreasonable. Changes were made by
running
find . -type f -name *.c | xargs unifdef -m -U OPENSSL_NO_RSA
find . -type f -name *.h | xargs unifdef -m -U OPENSSL_NO_RSA
using unifdef 2.10 and some newlines were removed manually.
Change-Id: Iea559e2d4b3d1053f28a4a9cc2f7a3d1f6cabd61
Reviewed-on: https://boringssl-review.googlesource.com/1095
Reviewed-by: Adam Langley <agl@google.com>
Since crypto/ebcdic.{c,h} are not present in BoringSSL, remove the #ifdefs
Changes were made by running
find . -type f -name *.c | xargs unifdef -m -U CHARSET_EBCDIC
find . -type f -name *.h | xargs unifdef -m -U CHARSET_EBCDIC
using unifdef 2.10.
An additional two ifdefs (CHARSET_EBCDIC_not) were removed manually.
Change-Id: Ie174bb00782cc44c63b0f9fab69619b3a9f66d42
Reviewed-on: https://boringssl-review.googlesource.com/1093
Reviewed-by: Adam Langley <agl@google.com>
(This appears to be the case with upstream too, it's not that BoringSSL
is missing optimisations from what I can see.)
Change-Id: I0e54762ef0d09e60994ec82c5cca1ff0b3b23ea4
Reviewed-on: https://boringssl-review.googlesource.com/1080
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
It was removed in the fork but it turned out to need it.
Change-Id: I21030c8d5befecb63f2c40a59963bec1da1d96fb
Reviewed-on: https://boringssl-review.googlesource.com/1081
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
I have confirmed with Dr. Stephen Henson (the author) that the file is
licensed under the OpenSSL license.
Change-Id: I97dc4c74b363184e1b36e5835bad684d66696d54
This change adds the stitched RC4-MD5 code from upstream OpenSSL but
exposes it as an AEAD. It's not a normal AEAD (it's stateful thus
doesn't take an nonce) but forcing pre-AEAD cipher suites in the AEAD
interface is less painful than forcing AEADs into the EVP_CIPHER
interface. Over time, more and more cipher suites will be exposed as
TLS-specific AEADs and then ssl/ can drop support for EVP_CIPHER.
See original code from upstream:
https://github.com/openssl/openssl/blob/master/crypto/evp/e_rc4_hmac_md5.c
Change-Id: Ia9267b224747f02be6b934ea0b2b50e1f529fab9
Reviewed-on: https://boringssl-review.googlesource.com/1043
Reviewed-by: Adam Langley <agl@google.com>
Fixes one comment that mentioned the wrong function name. Also causes
two BN random functions to fail when the output is NULL. Previously they
would silently do nothing.
Change-Id: I89796ab855ea32787765c301a478352287e61190
This gives us systematic bounds-checking on all the parses. Also adds a
convenience function, CBS_memdup, for saving the current contents of a CBS.
Change-Id: I17dad74575f03121aee3f771037b8806ff99d0c3
Reviewed-on: https://boringssl-review.googlesource.com/1031
Reviewed-by: Adam Langley <agl@google.com>
Since all AEAD ciphers now go through EVP_AEAD interface, the code which
uses EVP_Cipher interface no longer needs any of AEAD handling logic.
This also removes EVP_CTRL_AEAD_TLS1_AAD from GCM interface, which was
duplicating non-TLS-specific GCM logic and is not used anymore.
Change-Id: I5ddae880e7bc921337f9149a0acfdd00c9a478c3
aead_test reads test vectors from a file but used blank lines to
indicate the end of a test case. If the file ended without a blank line
to terminate the final test case, it would previously have been skipped.
Change-Id: Id8dd34e86f0b912596dfb33234a894f8d9aa0235
Apart from the obvious little issues, this also works around a
(seeming) libtool/linker:
a.c defines a symbol:
int kFoo;
b.c uses it:
extern int kFoo;
int f() {
return kFoo;
}
compile them:
$ gcc -c a.c
$ gcc -c b.c
and create a dummy main in order to run it, main.c:
int f();
int main() {
return f();
}
this works as expected:
$ gcc main.c a.o b.o
but, if we make an archive:
$ ar q lib.a a.o b.o
and use that:
$ gcc main.c lib.a
Undefined symbols for architecture x86_64
"_kFoo", referenced from:
_f in lib.a(b.o)
(It doesn't matter what order the .o files are put into the .a)
Linux and Windows don't seem to have this problem.
nm on a.o shows that the symbol is of type "C", which is a "common symbol"[1].
Basically the linker will merge multiple common symbol definitions together.
If ones makes a.c read:
int kFoo = 0;
Then one gets a type "D" symbol - a "data section symbol" and everything works
just fine.
This might actually be a libtool bug instead of an ld bug: Looking at `xxd
lib.a | less`, the __.SYMDEF SORTED index at the beginning of the archive
doesn't contain an entry for kFoo unless initialised.
Change-Id: I4cdad9ba46e9919221c3cbd79637508959359427
Now that the consuming code in ssl/ is removed, there is no need for this.
Leave SSL_COMP and STACK_OF(SSL_COMP) for now so as not to break any code which
manipulates the output of SSL_COMP_get_compression_methods to disable
compression.
Change-Id: Idf0a5debd96589ef6e7e56acf5d9259412b7d7a1
Previously we generated a number that was 8 bytes too large and used a
modular reduction, which has a (tiny, tiny) bias towards zero.
Out of an excess of caution, instead truncate the generated nonce and
try again if it's out of range.
Change-Id: Ia9a7a57dd6d3e5f13d0b881b3e9b2e986d46e4ca
The function was hard-coded to 20 rounds already so the argument was
already useless. Thanks to Huzaifa Sidhpurwala for noticing.
Change-Id: I5f9d6ca6d46c6ab769b19820f8f918349544846d
Ensure the library can find the right files under /etc/ssl/certs when
running on older systems.
There are many symbolic links under /etc/ssl/certs created by using
hash of the PEM certificates in order for OpenSSL to find those
certificates. Openssl has a tool to help you create hash symbolic
links (tools/c_rehash). However newer versions of the library changed
the hash algorithm, which makes it unable to run properly on systems
that use the old /etc/ssl/certs layout (e.g. Ubuntu Lucid).
This patch gives a way to find a certificate according to its hash by
using both the old and new algorithms. http://crbug.com/111045 is used
to track this issue.
(Imported from Chromium:
http://src.chromium.org/viewvc/chrome/trunk/deps/third_party/openssl/patches.chromium/0003-x509_hash_name_algorithm_change.patch?revision=231571)
Change-Id: Idbc27aba7685c991f8b94cfea38cf4f3f4b38adc
Windows has different names for these functions and also doesn't have
the strings.h header in which they appear.
This change adds tiny wrapper functions for Windows.
A client reference identity of ".example.com" matches a server certificate
presented identity that is any sub-domain of "example.com" (e.g.
"www.sub.example.com).
With the X509_CHECK_FLAG_SINGLE_LABEL_SUBDOMAINS flag, it matches only direct
child sub-domains (e.g. "www.sub.example.com"). (cherry picked from commit
e52c52f10bb8e34aaf8f28f3e5b56939e8f6b357)
(Imported from upstream's 3cc8a3f2343cda796de90c127b9e907ca3ec2da5)
Fixes to host checking wild card support and add support for setting
host checking flags when verifying a certificate chain.
(Imported from upstream's a2219f6be36d12f02b6420dd95f819cf364baf1d)
(Imported from upstream's 4ceb430a468e8226175aa3f169c0e746877c17e1,
4f7236edc7d5c384bdb148faf7b23f887cf18f69 and
ed693e43329383c0d68455d83778cdc9748a074d)
The lazy-initialisation of BN_MONT_CTX was serialising all threads, as noted by
Daniel Sands and co at Sandia. This was to handle the case that 2 or more
threads race to lazy-init the same context, but stunted all scalability in the
case where 2 or more threads are doing unrelated things! We favour the latter
case by punishing the former. The init work gets done by each thread that finds
the context to be uninitialised, and we then lock the "set" logic after that
work is done - the winning thread's work gets used, the losing threads throw
away what they've done.
(Imported from upstream's bf43446835bfd3f9abf1898a99ae20f2285320f3)
It's not clear whether this inconsistency could lead to an actual
computation error, but it involved a BIGNUM being passed around the
montgomery logic in an inconsistent state. This was found using flags
-DBN_DEBUG -DBN_DEBUG_RAND, and working backwards from this assertion
in 'ectest';
ectest: bn_mul.c:960: BN_mul: Assertion `(_bnum2->top == 0) ||
(_bnum2->d[_bnum2->top - 1] != 0)' failed
(Imported from upstream's 3cc546a3bbcbf26cd14fc45fb133d36820ed0a75)
Câmara, D.; Gouvêa, C. P. L.; López, J. & Dahab, R.: Fast Software
Polynomial Multiplication on ARM Processors using the NEON Engine.
http://conradoplg.cryptoland.net/files/2010/12/mocrysen13.pdf
(Imported from upstream's 0fb3d5b4fdc76b8d4a4700d03480cda135c6c117)
When looking for an extension we need to set the last found
position to -1 to properly search all extensions.
PR#3309
(Imported from upstream's 5cd5e0219d2e9a8c1f2fec3d867f38179c3a86af)
