Save a little bit of typing at the call site.
Change-Id: I818535409b57a694e5e0ea0e9741d89f2be89375
Reviewed-on: https://boringssl-review.googlesource.com/9090
Reviewed-by: Adam Langley <agl@google.com>
Change-Id: Id6a7443246479c62cbe0024e2131a2013959e21e
Reviewed-on: https://boringssl-review.googlesource.com/9078
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Change-Id: I057e19a9547a14b3950395db4318eaf0da01ec13
Reviewed-on: https://boringssl-review.googlesource.com/9079
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
OpenSSL 1.1.0 added a function to tell if an SSL* is DTLS or not. This
is probably a good idea, especially since SSL_version returns
non-normalized versions.
BUG=91
Change-Id: I25c6cf08b2ebabf0c610c74691de103399f729bc
Reviewed-on: https://boringssl-review.googlesource.com/9077
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
We were sending decode_error, but the spec explicitly says (RFC 5246):
unsupported_extension
sent by clients that receive an extended server hello containing
an extension that they did not put in the corresponding client
hello. This message is always fatal.
Also add a test for this when it's a known but unoffered extension. We
actually end up putting these in different codepaths now due to the
custom extensions stuff.
Thanks to Eric Rescorla for pointing this out.
Change-Id: If6c8033d4cfe69ef8af5678b873b25e0dbadfc4f
Reviewed-on: https://boringssl-review.googlesource.com/9061
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
To prevent configuration/established session confusion, the handshake
session state is separated into the configured session (ssl->session)
and the newly created session (ssl->s3->new_session). Upon conclusion of
the handshake, the finalized session is stored
in (ssl->s3->established_session). During the handshake, any requests
for the session (SSL_get_session) return a non-resumable session, to
prevent resumption of a partially filled session. Sessions should only
be cached upon the completion of the full handshake, using the resulting
established_session. The semantics of accessors on the session are
maintained mid-renego.
Change-Id: I4358aecb71fce4fe14a6746c5af1416a69935078
Reviewed-on: https://boringssl-review.googlesource.com/8612
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
It really should take a few more parameters and save a bit of
long-winded initialization work.
Change-Id: I2823f0aa82be39914a156323f6f32b470b6d6a3b
Reviewed-on: https://boringssl-review.googlesource.com/8876
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
[Tests added by davidben.]
Change-Id: I0d54a4f8b8fe91b348ff22658d95340cdb48b089
Reviewed-on: https://boringssl-review.googlesource.com/8850
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Change-Id: I55ab20c3add6e504522f3bb7e75aeed7daa0aad7
Reviewed-on: https://boringssl-review.googlesource.com/8851
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Change-Id: Iad572f44448141c5e2be49bf25b42719c625a97a
Reviewed-on: https://boringssl-review.googlesource.com/8812
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This adds the machinery for doing TLS 1.3 1RTT.
Change-Id: I736921ffe9dc6f6e64a08a836df6bb166d20f504
Reviewed-on: https://boringssl-review.googlesource.com/8720
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This makes custom private keys and EVP_PKEYs symmetric again. There is
no longer a requirement that the caller pre-filter the configured
signing prefs.
Also switch EVP_PKEY_RSA to NID_rsaEncryption. These are identical, but
if some key types are to be NIDs, we should make them all NIDs.
Change-Id: I82ea41c27a3c57f4c4401ffe1ccad406783e4c64
Reviewed-on: https://boringssl-review.googlesource.com/8785
Reviewed-by: David Benjamin <davidben@google.com>
[Rebased and tests added by davidben.]
In doing so, regenerate the test RSA certificate to be 2048-bit RSA.
RSA-PSS with SHA-512 is actually too large for 1024-bit RSA. Also make
the sigalg test loop test versions that do and don't work which subsumes
the ecdsa_sha1 TLS 1.3 test.
For now, RSA-PKCS1 is still allowed because NSS has yet to implement
RSA-PSS and we'd like to avoid complicated interop testing.
Change-Id: I686b003ef7042ff757bdaab8d5838b7a4d6edd87
Reviewed-on: https://boringssl-review.googlesource.com/8613
Reviewed-by: David Benjamin <davidben@google.com>
Implement in both C and Go. To test this, route config into all the
sign.go functions so we can expose bugs to skip the check.
Unfortunately, custom private keys are going to be a little weird since
we can't check their curve type. We may need to muse on what to do here.
Perhaps the key type bit should return an enum that includes the curve?
It's weird because, going forward, hopefully all new key types have
exactly one kind of signature so key type == sig alg == sig alg prefs.
Change-Id: I1f487ec143512ead931e3392e8be2a3172abe3d2
Reviewed-on: https://boringssl-review.googlesource.com/8701
Reviewed-by: David Benjamin <davidben@google.com>
That instead happens via signature algorithms, which will be done in a
follow-up commit.
Change-Id: I97bc4646319dddbff62552244b0dd7e9bb2650ef
Reviewed-on: https://boringssl-review.googlesource.com/8700
Reviewed-by: David Benjamin <davidben@google.com>
ssl_verify_* already ought to be checking this, so there's only a need
to check against the configured preferences.
Change-Id: I79bc771969c57f953278e622084641e6e20108e3
Reviewed-on: https://boringssl-review.googlesource.com/8698
Reviewed-by: David Benjamin <davidben@google.com>
TLS 1.3 also forbids signing SHA-1 digests, but this will be done as a
consequence of forbidding PKCS#1 in 1.3 altogether (rsa_sign_sha1) and
requiring a curve match in ECDSA (ecdsa_sha1).
Change-Id: I665971139ccef9e270fd5796c5e6a814a8f663b1
Reviewed-on: https://boringssl-review.googlesource.com/8696
Reviewed-by: David Benjamin <davidben@google.com>
This allows us to specify client-only and unused callbacks without
needing to include empty wrappers, and allows us to continue using the
default ext_*_parse_clienthello function for early parsing.
Change-Id: I4104e22a0a6dd6b02f9a5605e9866f6b3de6a097
Reviewed-on: https://boringssl-review.googlesource.com/8743
Reviewed-by: David Benjamin <davidben@google.com>
Rather than blindly select SHA-1 if we can't find a matching one, act as
if the peer advertised rsa_pkcs1_sha1 and ecdsa_sha1. This means that we
will fail the handshake if no common algorithm may be found.
This is done in preparation for removing the SHA-1 default in TLS 1.3.
Change-Id: I3584947909d3d6988b940f9404044cace265b20d
Reviewed-on: https://boringssl-review.googlesource.com/8695
Reviewed-by: David Benjamin <davidben@google.com>
Instead, in SSL_set_private_key_digest_prefs, convert the NID list to a
sigalgs list. We'll need to add a new API later when custom key callers
are ready to start advertising RSA-PSS.
This removes all callers of tls12_get_hash except inside the signing and
verifying functions.
Change-Id: Ie534f3b736c6ac6ebeb0d7770d489f72e3321865
Reviewed-on: https://boringssl-review.googlesource.com/8693
Reviewed-by: David Benjamin <davidben@google.com>
This replaces the old key_exchange_info APIs and does not require the
caller be aware of the mess around SSL_SESSION management. They
currently have the same bugs around renegotiation as before, but later
work to fix up SSL_SESSION tracking will fix their internals.
For consistency with the existing functions, I've kept the public API at
'curve' rather than 'group' for now. I think it's probably better to
have only one name with a single explanation in the section header
rather than half and half. (I also wouldn't be surprised if the IETF
ends up renaming 'group' again to 'key exchange' at some point. We'll
see what happens.)
Change-Id: I8e90a503bc4045d12f30835c86de64ef9f2d07c8
Reviewed-on: https://boringssl-review.googlesource.com/8565
Reviewed-by: Adam Langley <agl@google.com>
OpenSSL's SSL_OP_NO_* flags allow discontinuous version ranges. This is a
nuisance for two reasons. First it makes it unnecessarily difficult to answer
"are any versions below TLS 1.3 enabled?". Second the protocol does not allow
discontinuous version ranges on the client anyway. OpenSSL instead picks the
first continous range of enabled versions on the client, but not the server.
This is bizarrely inconsistent. It also doesn't quite do this as the
ClientHello sending logic does this, but not the ServerHello processing logic.
So we actually break some invariants slightly. The logic is also cumbersome in
DTLS which kindly inverts the comparison logic.
First, switch min_version/max_version's storage to normalized versions. Next
replace all the ad-hoc version-related functions with a single
ssl_get_version_range function. Client and server now consistently pick a
contiguous range of versions. Note this is a slight behavior change for
servers. Version-range-sensitive logic is rewritten to use this new function.
BUG=66
Change-Id: Iad0d64f2b7a917603fc7da54c9fc6656c5fbdb24
Reviewed-on: https://boringssl-review.googlesource.com/8513
Reviewed-by: David Benjamin <davidben@google.com>
The signing logic itself still depends on pre-hashed messages and will be fixed
in later commits.
Change-Id: I901b0d99917c311653d44efa34a044bbb9f11e57
Reviewed-on: https://boringssl-review.googlesource.com/8545
Reviewed-by: David Benjamin <davidben@google.com>
As part of the SignatureAlgorithm change in the TLS 1.3 specification,
the existing signature/hash combinations are replaced with a combined
signature algorithm identifier. This change maintains the existing APIs
while fixing the internal representations. The signing code currently
still treats the SignatureAlgorithm as a decomposed value, which will be
fixed as part of a separate CL.
Change-Id: I0cd1660d74ad9bcf55ce5da4449bf2922660be36
Reviewed-on: https://boringssl-review.googlesource.com/8480
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
The 'elliptic_curves' extension is being renamed to 'supported_groups'
in the TLS 1.3 draft, and most of the curve-specific methods are
generalized to groups/group IDs.
Change-Id: Icd1a1cf7365c8a4a64ae601993dc4273802610fb
Reviewed-on: https://boringssl-review.googlesource.com/7955
Reviewed-by: David Benjamin <davidben@google.com>
Although the server_name extension was intended to be extensible to new name
types, OpenSSL 1.0.x had a bug which meant different name types will cause an
error. Further, RFC 4366 originally defined syntax inextensibly. RFC 6066
corrected this mistake, but adding new name types is no longer feasible.
Act as if the extensibility does not exist to simplify parsing. This also
aligns with OpenSSL 1.1.x's behavior. See upstream's
062178678f5374b09f00d70796f6e692e8775aca and
https://www.ietf.org/mail-archive/web/tls/current/msg19425.html
Change-Id: I5af26516e8f777ddc1dab5581ff552daf2ea59b5
Reviewed-on: https://boringssl-review.googlesource.com/7294
Reviewed-by: David Benjamin <davidben@google.com>
A lot of consumers of obj.h only want the NID values. Others didn't need
it at all. This also removes some OBJ_nid2sn and OBJ_nid2ln calls in EVP
error paths which isn't worth pulling a large table in for.
BUG=chromium:499653
Change-Id: Id6dff578f993012e35b740a13b8e4f9c2edc0744
Reviewed-on: https://boringssl-review.googlesource.com/7563
Reviewed-by: David Benjamin <davidben@google.com>
We reordered extensions some time ago to ensure a non-empty extension was last,
but the comment was since lost (or I forgot to put one in in the first place).
Add one now so we don't regress.
Change-Id: I2f6e2c3777912eb2c522a54bbbee579ee37ee58a
Reviewed-on: https://boringssl-review.googlesource.com/7570
Reviewed-by: David Benjamin <davidben@google.com>
Most code already dereferences it directly.
Change-Id: I227fa91ecbf25a19077f7cfba21b0abd2bc2bd1d
Reviewed-on: https://boringssl-review.googlesource.com/7422
Reviewed-by: David Benjamin <davidben@google.com>
Change-Id: I6267c9bfb66940d0b6fe5368514210a058ebd3cc
Reviewed-on: https://boringssl-review.googlesource.com/7494
Reviewed-by: Emily Stark (Dunn) <estark@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
EC point format negotiation is dead and gone.
Change-Id: If13ed7c5f31b64df2bbe90c018b2683b6371a980
Reviewed-on: https://boringssl-review.googlesource.com/7293
Reviewed-by: Adam Langley <agl@google.com>
C has implicit conversion of |void *| to other pointer types so these
casts are unnecessary. Clean them up to make the code easier to read
and to make it easier to find dangerous casts.
Change-Id: I26988a672e8ed4d69c75cfbb284413999b475464
Reviewed-on: https://boringssl-review.googlesource.com/7102
Reviewed-by: David Benjamin <davidben@google.com>
Take the mappings for MD5 and SHA-224 values out of the code altogether. This
aligns with the current TLS 1.3 draft.
For MD5, this is a no-op. It is not currently possible to configure accepted
signature algorithms, MD5 wasn't in the hardcoded list, and we already had a
test ensuring we enforced our preferences correctly. MD5 also wasn't in the
default list of hashes our keys could sign and no one overrides it with a
different hash.
For SHA-224, this is not quite a no-op. The hardcoded accepted signature
algorithms list included SHA-224, so this will break servers relying on that.
However, Chrome's metrics have zero data points of servers picking SHA-224 and
no other major browser includes it. Thus that should be safe.
SHA-224 was also in the default list of hashes we are willing to sign. For
client certificates, Chromium's abstractions already did not allow signing
SHA-224, so this is a no-op there. For servers, this will break any clients
which only accept SHA-224. But no major browsers do this and I am not aware of
any client implementation which does such ridiculous thing.
(SHA-1's still in there. Getting rid of that one is going to take more effort.)
Change-Id: I6a765fdeea9e19348e409d58a0eac770b318e599
Reviewed-on: https://boringssl-review.googlesource.com/7020
Reviewed-by: Adam Langley <agl@google.com>
This removes the various non-PRF checks from SSL3_ENC_METHOD so that can
have a clearer purpose. It also makes TLS 1.0 through 1.2's
SSL3_ENC_METHOD tables identical and gives us an assert to ensure
nothing accesses the version bits before version negotiation.
Accordingly, ssl_needs_record_splitting was reordered slightly so we
don't rely on enc_method being initialized to TLS 1.2
pre-version-negotiation.
This leaves alert_value as the only part of SSL3_ENC_METHOD which may be
accessed before version negotiation.
Change-Id: If9e299e2ef5511b5fa442b2af654eed054c3e675
Reviewed-on: https://boringssl-review.googlesource.com/6842
Reviewed-by: Adam Langley <alangley@gmail.com>
node.js is, effectively, another bindings library. However, it's better
written than most and, with these changes, only a couple of tiny fixes
are needed in node.js. Some of these changes are a little depressing
however so we'll need to push node.js to use APIs where possible.
Changes:
∙ Support verify_recover. This is very obscure and the motivation
appears to be https://github.com/nodejs/node/issues/477 – where it's
not clear that anyone understands what it means :(
∙ Add a few, no-op #defines
∙ Add some members to |SSL_CTX| and |SSL| – node.js needs to not
reach into these structs in the future.
∙ Add EC_get_builtin_curves.
∙ Add EVP_[CIPHER|MD]_do_all_sorted – these functions are limited to
decrepit.
Change-Id: I9a3566054260d6c4db9d430beb7c46cc970a9d46
Reviewed-on: https://boringssl-review.googlesource.com/6952
Reviewed-by: Adam Langley <agl@google.com>
I got that from the TLS 1.3 draft, but it's kind of silly-looking. X25519
already refers to a Diffie-Hellman primitive.
Also hopefully the WG will split NamedGroups and SignatureAlgorithms per the
recent proposal, so it won't be needed anyway. (Most chatter is about what
hashes should be allowed with what NIST curves, so it seems like people like
the split itself? We'll see.)
Change-Id: I7bb713190001199a3ebd30b67df2c00d29132431
Reviewed-on: https://boringssl-review.googlesource.com/6912
Reviewed-by: Adam Langley <agl@google.com>
The various SSL3_ENC_METHODs ought to be defined in the same file their
functions are defined in, so they can be static.
Change-Id: I34a1d3437e8e61d4d50f2be70312e4630ea89c19
Reviewed-on: https://boringssl-review.googlesource.com/6840
Reviewed-by: Adam Langley <alangley@gmail.com>
There's not much point in putting those in the interface as the
final_finished_mac implementation is itself different between SSL 3.0
and TLS.
Change-Id: I76528a88d255c451ae008f1a34e51c3cb57d3073
Reviewed-on: https://boringssl-review.googlesource.com/6838
Reviewed-by: Adam Langley <alangley@gmail.com>
As things stand now, they don't actually do anything.
Change-Id: I9f8b4cbf38a0dffabfc5265805c52bb8d7a8fb0d
Reviewed-on: https://boringssl-review.googlesource.com/6837
Reviewed-by: Adam Langley <alangley@gmail.com>
Both are connection state rather than configuration state. Notably this
cuts down more of SSL_clear that can't just use ssl_free + ssl_new.
Change-Id: I3c05b3ae86d4db8bd75f1cd21656f57fc5b55ca9
Reviewed-on: https://boringssl-review.googlesource.com/6835
Reviewed-by: Adam Langley <alangley@gmail.com>
It's the same between TLS and SSL 3.0. There's also no need for the
do_change_cipher_spec wrapper (it no longer needs checks to ensure it
isn't called at a bad place). Finally fold the setup_key_block call into
change_cipher_spec.
Change-Id: I7917f48e1a322f5fbafcf1dfb8ad53f66565c314
Reviewed-on: https://boringssl-review.googlesource.com/6834
Reviewed-by: Adam Langley <alangley@gmail.com>
This is a minor regression from
https://boringssl-review.googlesource.com/5235.
If the client, for whatever reason, had an ID-based session but also
supports tickets, it will send non-empty ID + empty ticket extension.
If the ticket extension is non-empty, then the ID is not an ID but a
dummy signaling value, so 5235 avoided looking it up. But if it is
present and empty, the ID is still an ID and should be looked up.
This shouldn't have any practical consequences, except if a server
switched from not supporting tickets and then started supporting it,
while keeping the session cache fixed.
Add a test for this case, and tighten up existing ID vs ticket tests so
they fail if we resume with the wrong type.
Change-Id: Id4d08cd809af00af30a2b67fe3a971078e404c75
Reviewed-on: https://boringssl-review.googlesource.com/6554
Reviewed-by: Adam Langley <alangley@gmail.com>
That we're half and half is really confusing.
Change-Id: I1c2632682e8a3e63d01dada8e0eb3b735ff709ce
Reviewed-on: https://boringssl-review.googlesource.com/6785
Reviewed-by: Adam Langley <agl@google.com>
The new curve is not enabled by default.
As EC_GROUP/EC_POINT is a bit too complex for X25519, this introduces an
SSL_ECDH_METHOD abstraction which wraps just the raw ECDH operation. It
also tidies up some of the curve code which kept converting back and
force between NIDs and curve IDs. Now everything transits as curve IDs
except for API entry points (SSL_set1_curves) which take NIDs. Those
convert immediately and act on curve IDs from then on.
Note that, like the Go implementation, this slightly tweaks the order of
operations. The client sees the server public key before sending its
own. To keep the abstraction simple, SSL_ECDH_METHOD expects to
generate a keypair before consuming the peer's public key. Instead, the
client handshake stashes the serialized peer public value and defers
parsing it until it comes time to send ClientKeyExchange. (This is
analogous to what it was doing before where it stashed the parsed peer
public value instead.)
It still uses TLS 1.2 terminology everywhere, but this abstraction should also
be compatible with TLS 1.3 which unifies (EC)DH-style key exchanges.
(Accordingly, this abstraction intentionally does not handle parsing the
ClientKeyExchange/ServerKeyExchange framing or attempt to handle asynchronous
plain RSA or the authentication bits.)
BUG=571231
Change-Id: Iba09dddee5bcdfeb2b70185308e8ab0632717932
Reviewed-on: https://boringssl-review.googlesource.com/6780
Reviewed-by: Adam Langley <agl@google.com>
It already wasn't in the default list and no one enables it. Remove it
altogether. (It's also gone from the current TLS 1.3 draft.)
Change-Id: I143d07d390d186252204df6bdb8ffd22649f80e3
Reviewed-on: https://boringssl-review.googlesource.com/6775
Reviewed-by: Adam Langley <agl@google.com>
In doing so, make the asynchronous portion look more like
ssl3_send_server_key_exchange. This is a considerably simpler structure,
so the save/resume doesn't need any state.
Mostly this means writing out the signature algorithm can now go through
CBB rather than a uint8_t* without bounds check.
Change-Id: If99fcffd0d41a84514c3d23034062c582f1bccb2
Reviewed-on: https://boringssl-review.googlesource.com/6771
Reviewed-by: Adam Langley <agl@google.com>
Rather than the length of the top-level CBB, which is kind of odd when ASN.1
length prefixes are not yet determined, return the number of bytes written to
the CBB so far. This can be computed without increasing the size of CBB at all.
Have offset and pending_*.
This means functions which take in a CBB as argument will not be sensitive to
whether the CBB is a top-level or child CBB. The extensions logic had to be
careful to only ever compare differences of lengths, which was awkward.
The reversal will also allow for the following pattern in the future, once
CBB_add_space is split into, say, CBB_reserve and CBB_did_write and we add a
CBB_data:
uint8_t *signature;
size_t signature_len = 0;
if (!CBB_add_asn1(out, &cert, CBB_ASN1_SEQUENCE) ||
/* Emit the TBSCertificate. */
!CBB_add_asn1(&cert, &tbs_cert, CBS_ASN1_SEQUENCE) ||
!CBB_add_tbs_cert_stuff(&tbs_cert, stuff) ||
!CBB_flush(&cert) ||
/* Feed it into md_ctx. */
!EVP_DigestSignInit(&md_ctx, NULL, EVP_sha256(), NULL, pkey) ||
!EVP_DigestSignUpdate(&md_ctx, CBB_data(&cert), CBB_len(&cert)) ||
/* Emit the signature algorithm. */
!CBB_add_asn1(&cert, &sig_alg, CBS_ASN1_SEQUENCE) ||
!CBB_add_sigalg_stuff(&sig_alg, other_stuff) ||
/* Emit the signature. */
!EVP_DigestSignFinal(&md_ctx, NULL, &signature_len) ||
!CBB_reserve(&cert, &signature, signature_len) ||
!EVP_DigestSignFinal(&md_ctx, signature, &signature_len) ||
!CBB_did_write(&cert, signature_len)) {
goto err;
}
(Were TBSCertificate not the first field, we'd still have to sample
CBB_len(&cert), but at least that's reasonable straight-forward. The
alternative would be if CBB_data and CBB_len somehow worked on
recently-invalidated CBBs, but that would go wrong once the invalidated CBB's
parent flushed and possibly shifts everything.)
And similar for signing ServerKeyExchange.
Change-Id: I7761e492ae472d7632875b5666b6088970261b14
Reviewed-on: https://boringssl-review.googlesource.com/6681
Reviewed-by: Adam Langley <agl@google.com>
Then deprecate the old functions. Thanks to upstream's
6977e8ee4a718a76351ba5275a9f0be4e530eab5 for the idea.
Change-Id: I916abd6fca2a3b2a439ec9902d9779707f7e41eb
Reviewed-on: https://boringssl-review.googlesource.com/6622
Reviewed-by: Adam Langley <agl@google.com>
