|EC_GFp_nistz256_method| is not marked |OPENSSL_EXPORT| so only the
built-in P-256 curve uses it. |EC_GROUP_set_generator| doesn't allow
the generator to be changed for any |EC_GROUP| for a built-in curve.
Consequently, there's no way (except some kind of terrible abuse) that
the nistz code could be executed with a non-default generator.
Change-Id: Ib22f00bc74c103b7869ed1e35032b1f3d26cdad2
Reviewed-on: https://boringssl-review.googlesource.com/6446
Reviewed-by: Adam Langley <agl@google.com>
Found with -Wtype-limits.
Change-Id: I5580f179425bc6b09ff2a8559fce121b0cc8ae14
Signed-off-by: Piotr Sikora <piotrsikora@google.com>
Reviewed-on: https://boringssl-review.googlesource.com/6463
Reviewed-by: Adam Langley <agl@google.com>
Found with -Wtype-limits.
Change-Id: I41cdbb7e6564b715dfe445877a89594371fdeef0
Signed-off-by: Piotr Sikora <piotrsikora@google.com>
Reviewed-on: https://boringssl-review.googlesource.com/6462
Reviewed-by: Adam Langley <agl@google.com>
Chromium's toolchains may now assume C++11 library support, so we may freely
use C++11 features. (Chromium's still in the process of deciding what to allow,
but we use Google's style guide directly, toolchain limitations aside.)
Change-Id: I1c7feb92b7f5f51d9091a4c686649fb574ac138d
Reviewed-on: https://boringssl-review.googlesource.com/6465
Reviewed-by: Adam Langley <agl@google.com>
dh.c had a 10k-bit limit but it wasn't quite correctly enforced. However,
that's still 1.12s of jank on the IO thread, which is too long. Since the SSL
code consumes DHE groups from the network, it should be responsible for
enforcing what sanity it needs on them.
Costs of various bit lengths on 2013 Macbook Air:
1024 - 1.4ms
2048 - 14ms
3072 - 24ms
4096 - 55ms
5000 - 160ms
10000 - 1.12s
UMA says that DHE groups are 0.2% 4096-bit and otherwise are 5.5% 2048-bit and
94% 1024-bit and some noise. Set the limit to 4096-bit to be conservative,
although that's already quite a lot of jank.
BUG=554295
Change-Id: I8e167748a67e4e1adfb62d73dfff094abfa7d215
Reviewed-on: https://boringssl-review.googlesource.com/6464
Reviewed-by: Adam Langley <agl@google.com>
The file armv8-mont.pl is taken from upstream. The speed ups are fairly
modest (~30%) but seem worthwhile.
Before:
Did 231 RSA 2048 signing operations in 1008671us (229.0 ops/sec)
Did 11208 RSA 2048 verify operations in 1036997us (10808.1 ops/sec)
Did 342 RSA 2048 (3 prime, e=3) signing operations in 1021545us (334.8 ops/sec)
Did 32000 RSA 2048 (3 prime, e=3) verify operations in 1016162us (31491.0 ops/sec)
Did 45 RSA 4096 signing operations in 1039805us (43.3 ops/sec)
Did 3608 RSA 4096 verify operations in 1060283us (3402.9 ops/sec)
After:
Did 300 RSA 2048 signing operations in 1009772us (297.1 ops/sec)
Did 12740 RSA 2048 verify operations in 1075413us (11846.6 ops/sec)
Did 408 RSA 2048 (3 prime, e=3) signing operations in 1016139us (401.5 ops/sec)
Did 33000 RSA 2048 (3 prime, e=3) verify operations in 1017510us (32432.1 ops/sec)
Did 52 RSA 4096 signing operations in 1067678us (48.7 ops/sec)
Did 3408 RSA 4096 verify operations in 1062863us (3206.4 ops/sec)
Change-Id: Ife74fac784067fce3668b5c87f51d481732ff855
Reviewed-on: https://boringssl-review.googlesource.com/6444
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
(Imported from upstream's 52e028b9de371da62c1e51b46592517b1068d770.)
Change-Id: If980d774671b9b5ba997db3fd7d4043525a85609
Reviewed-on: https://boringssl-review.googlesource.com/6445
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
When building in OPENSSL_NO_ASM mode, MSVC complains about unreachable
code. The redundant initialization of |i| is the main problem. The
skipping of the first test of the condition |i < num| with |goto| was
also confusing.
It turns out that |bn_mul_mont| is only called when assembly language
optimizations are available, but in that case the assmebly language
versions will always be used instead. Although this code will be
compiled in |OPENSSL_NO_ASM| builds, it is never called in
|OPENSSL_NO_ASM| builds. Thus, it can just be removed.
Change-Id: Id551899b2602824978edc1a1cb0703b76516808d
Reviewed-on: https://boringssl-review.googlesource.com/5550
Reviewed-by: Adam Langley <agl@google.com>
The previous logic only defined
|SHA512_BLOCK_CAN_MANAGE_UNALIGNED_DATA| when the assembly language
optimizations were enabled, but
|SHA512_BLOCK_CAN_MANAGE_UNALIGNED_DATA| is also useful when the C
implementations are used.
If support for ARM processors that don't support unaligned access is
important, then it might be better to condition the enabling of
|SHA512_BLOCK_CAN_MANAGE_UNALIGNED_DATA| on ARM based on more specific
flags.
Change-Id: Ie8c37c73aba308c3ccf79371ce5831512e419989
Reviewed-on: https://boringssl-review.googlesource.com/6402
Reviewed-by: Adam Langley <agl@google.com>
Most functions can take this in as const. Note this changes an
RSA_METHOD hook, though one I would not expect anyone to override.
Change-Id: Ib70ae65e5876b01169bdc594e465e3e3c4319a8b
Reviewed-on: https://boringssl-review.googlesource.com/6419
Reviewed-by: Adam Langley <agl@google.com>
This removes a sharp corner in the API where |ECDH_compute_key| assumed
that callers were either using ephemeral keys, or else had already
checked that the public key was on the curve.
A public key that's not on the curve can be in a small subgroup and thus
the result can leak information about the private key.
This change causes |EC_POINT_set_affine_coordinates_GFp| to require that
points are on the curve. |EC_POINT_oct2point| already does this.
Change-Id: I77d10ce117b6efd87ebb4a631be3a9630f5e6636
Reviewed-on: https://boringssl-review.googlesource.com/5861
Reviewed-by: Adam Langley <agl@google.com>
This change fixes up several comments (many of which were spotted by
Kenny Root) and also changes doc.go to detect cases where comments don't
start with the correct word. (This is a common error.)
Since we have docs builders now, these errors will be found
automatically in the future.
Change-Id: I58c6dd4266bf3bd4ec748763c8762b1a67ae5ab3
Reviewed-on: https://boringssl-review.googlesource.com/6440
Reviewed-by: Adam Langley <agl@google.com>
This function allows one to extract the current IVs from an SSL
connection. This is needed for the CBC cipher suites with implicit IVs
because, for those, the IV can't be extracted from the handshake key
material.
Change-Id: I247a1d0813b7a434b3cfc88db86d2fe8754344b6
Reviewed-on: https://boringssl-review.googlesource.com/6433
Reviewed-by: Adam Langley <agl@google.com>
The documentation in md32_common.h is now (more) correct with respect
to the most important details of the layout of |HASH_CTX|. The
documentation explaining why sha512.c doesn't use md32_common.h is now
more accurate as well.
Before, the C implementations of HASH_BLOCK_DATA_ORDER took a pointer
to the |HASH_CTX| and the assembly language implementations took a
pointer to the hash state |h| member of |HASH_CTX|. (This worked
because |h| is always the first member of |HASH_CTX|.) Now, the C
implementations take a pointer directly to |h| too.
The definitions of |MD4_CTX|, |MD5_CTX|, and |SHA1_CTX| were changed to
be consistent with |SHA256_CTX| and |SHA512_CTX| in storing the hash
state in an array. This will break source compatibility with any
external code that accesses the hash state directly, but will not
affect binary compatibility.
The second parameter of |HASH_BLOCK_DATA_ORDER| is now of type
|const uint8_t *|; previously it was |void *| and all implementations
had a |uint8_t *data| variable to access it as an array of bytes.
This change paves the way for future refactorings such as automatically
generating the |*_Init| functions and/or sharing one I-U-F
implementation across all digest algorithms.
Change-Id: I6e9dd09ff057c67941021d324a4fa1d39f58b0db
Reviewed-on: https://boringssl-review.googlesource.com/6405
Reviewed-by: Adam Langley <agl@google.com>
Although those are only created by code owned by RSA_METHOD, custom RSA_METHODs
shouldn't be allowed to squat our internal fields and then change how you free
things.
Remove 'method' from their names now that they're not method-specific.
Change-Id: I9494ef9a7754ad59ac9fba7fd463b3336d826e0b
Reviewed-on: https://boringssl-review.googlesource.com/6423
Reviewed-by: Adam Langley <agl@google.com>
This restores the original semantics of the finished hook.
Change-Id: I70da393c7e66fb6e3be1e2511e08b34bb54fc0b4
Reviewed-on: https://boringssl-review.googlesource.com/6422
Reviewed-by: Adam Langley <agl@google.com>
Having a single RSA_METHOD means they all get pulled in. Notably, RSA key
generation pulls in the primality-checking code.
Change-Id: Iece480113754da090ddf87b64d8769f01e05d26c
Reviewed-on: https://boringssl-review.googlesource.com/6389
Reviewed-by: Adam Langley <agl@google.com>
This will allow a static linker (with -ffunction-sections since things aren't
split into files) to drop unused parts of DH and DSA. Notably, the parameter
generation bits pull in primality-checking code.
Change-Id: I25087e4cb91bc9d0ab43bcb267c2e2c164e56b59
Reviewed-on: https://boringssl-review.googlesource.com/6388
Reviewed-by: Adam Langley <agl@google.com>
Removing the function codes continued to sample __func__ for compatibility with
ERR_print_errors_cb, but not ERR_error_string_n. We can just emit
OPENSSL_internal for both. ERR_print_errors_cb already has the file and line
number available which is strictly more information than the function name.
(ERR_error_string_n does not, but we'd already turned that to
OPENSSL_internal.)
This shaves 100kb from a release build of the bssl tool.
In doing so, put an unused function code parameter back into ERR_put_error to
align with OpenSSL. We don't need to pass an additional string in anymore, so
OpenSSL compatibility with anything which uses ERR_LIB_USER or
ERR_get_next_error_library costs nothing. (Not that we need it.)
Change-Id: If6af34628319ade4145190b6f30a0d820e00b20d
Reviewed-on: https://boringssl-review.googlesource.com/6387
Reviewed-by: Adam Langley <agl@google.com>
MSVC unhelpfuly says: warning C4146: unary minus operator applied to
unsigned type, result still unsigned.
Change-Id: Ia1e6b9fc415908920abb1bcd98fc7f7a5670c2c7
This change incorporates Intel's P-256 implementation. The record of
Intel's submission under CLA is in internal bug number 25330687.
Before:
Did 3582 ECDH P-256 operations in 1049114us (3414.3 ops/sec)
Did 8525 ECDSA P-256 signing operations in 1028778us (8286.5 ops/sec)
Did 3487 ECDSA P-256 verify operations in 1008996us (3455.9 ops/sec)
build/tool/bssl is 1434704 bytes after strip -s
After:
Did 8618 ECDH P-256 operations in 1027884us (8384.2 ops/sec)
Did 21000 ECDSA P-256 signing operations in 1049490us (20009.7 ops/sec)
Did 8268 ECDSA P-256 verify operations in 1079481us (7659.2 ops/sec)
build/tool/bssl is 1567216 bytes after strip -s
Change-Id: I147971a8e19849779c8ed7e20310d41bd4962299
Reviewed-on: https://boringssl-review.googlesource.com/6371
Reviewed-by: Adam Langley <agl@google.com>
The documentation in md32_common.h is now (more) correct with respect
to the most important details of the layout of |HASH_CTX|. The
documentation explaining why sha512.c doesn't use md32_common.h is now
more accurate as well.
Before, the C implementations of HASH_BLOCK_DATA_ORDER took a pointer
to the |HASH_CTX| and the assembly language implementations tool a
pointer to the hash state |h| member of |HASH_CTX|. (This worked
because |h| is always the first member of |HASH_CTX|.) Now, the C
implementations take a pointer directly to |h| too.
The definitions of |MD4_CTX|, |MD5_CTX|, and |SHA1_CTX| were changed to
be consistent with |SHA256_CTX| and |SHA512_CTX| in storing the hash
state in an array. This will break source compatibility with any
external code that accesses the hash state directly, but will not
affect binary compatibility.
The second parameter of |HASH_BLOCK_DATA_ORDER| is now of type
|const uint8_t *|; previously it was |void *| and all implementations
had a |uint8_t *data| variable to access it as an array of bytes.
This change paves the way for future refactorings such as automatically
generating the |*_Init| functions and/or sharing one I-U-F
implementation across all digest algorithms.
Change-Id: I30513bb40b5f1d2c8932551d54073c35484b3f8b
Reviewed-on: https://boringssl-review.googlesource.com/6401
Reviewed-by: Adam Langley <agl@google.com>
BN_mod_exp_mont_consttime does not modify its |BN_MONT_CTX| so that
value should be const.
Change-Id: Ie74e48eec8061899fd056fbd99dcca2a86b02cad
Reviewed-on: https://boringssl-review.googlesource.com/6403
Reviewed-by: Adam Langley <agl@google.com>
Android is now using Ninja so it doesn't spew so much to the terminal
and thus any warnings in BoringSSL (which builds really early in the
process) and much more obvious.
Thus this change fixes a few warnings that appear in the Android build.
Change-Id: Id255ace90fece772a1c3a718c877559ce920b960
Reviewed-on: https://boringssl-review.googlesource.com/6400
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
This reverts most of commit 271777f5ac. The old
ChaCha20-Poly1305, though being transitioned to the old name, should not change
in behavior. This also avoids adding a special-case to SSL_AEAD_CTX.
Also revert the name change to SSL_CIPHER_is_CHACHA20POLY1305. The one consumer
for that function doesn't need to distinguish the old and new variants, so
avoid unnecessary turbulence.
Change-Id: I5a6f97fccc5839d4d25e74e304dc002329d21b4b
Reviewed-on: https://boringssl-review.googlesource.com/6385
Reviewed-by: Adam Langley <agl@google.com>
Change-Id: I799e289a402612446e08f64f59e0243f164cf695
Reviewed-on: https://boringssl-review.googlesource.com/6372
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
Since we pre-generate our perlasm, having the output of these files be
sensitive to the environment the run in is unhelpful. It would be bad to
suddenly change what features we do or don't compile in whenever workstations'
toolchains change or if developers do or don't have CC variables set.
Previously, all compiler-version-gated features were turned on in
https://boringssl-review.googlesource.com/6260, but this broke the build. I
also wasn't thorough enough in gathering performance numbers. So, flip them all
to off instead. I'll enable them one-by-one as they're tested.
This should result in no change to generated assembly.
Change-Id: Ib4259b3f97adc4939cb0557c5580e8def120d5bc
Reviewed-on: https://boringssl-review.googlesource.com/6383
Reviewed-by: Adam Langley <agl@google.com>
The previous commit fixed a signed/unsigned warning but, on 32-bit
systems, long is only 32 bits, so the fix was incorrect there.
Change-Id: I6afe340164de0e176c7f710fcdd095b2a4cddee4
1. Check for the presence of the private key before allocating or
computing anything.
2. Check the return value of |BN_CTX_get|.
3. Don't bother computing the Y coordinate since it is not used.
4. Remove conditional logic in cleanup section.
Change-Id: I4d8611603363c7e5d16a8e9f1d6c3a56809f27ae
Reviewed-on: https://boringssl-review.googlesource.com/6171
Reviewed-by: Adam Langley <alangley@gmail.com>
These functions ultimately return the result of |BN_num_bits|, and that
function's return type is |unsigned|. Thus, these functions' return
type should also be |unsigned|.
Change-Id: I2cef63e6f75425857bac71f7c5517ef22ab2296b
Reviewed-on: https://boringssl-review.googlesource.com/6170
Reviewed-by: Adam Langley <alangley@gmail.com>
Intel's P-256 code has very large tables and things like Chromium just
don't need that extra size. However, servers generally do so this change
adds an OPENSSL_SMALL define that currently just drops the 64-bit P-224
but will gate Intel's P-256 in the future too.
Change-Id: I2e55c6e06327fafabef9b96d875069d95c0eea81
Reviewed-on: https://boringssl-review.googlesource.com/6362
Reviewed-by: Adam Langley <alangley@gmail.com>
QUIC has a complex relationship with BoringSSL owing to it living both
in Chromium and the Google-internal repository. In order for it to
handle the ChaCha20-Poly1305 AEAD switch more easily this change gives
the unsuffixed name to the old AEAD, for now.
Once QUIC has moved to the “_old” version the unsuffixed name can be
given to the new version.
Change-Id: Id8a77be6e3fe2358d78e022413fe088e5a274dca
Reviewed-on: https://boringssl-review.googlesource.com/6361
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <alangley@gmail.com>
If the application is only using the P-256 implementation in p256-64.c,
then the WNAF code would all be dead code. The change reorganizes the
code so that all modern toolchains should be able to recognize that
fact and eliminate the WNAF-based code when it is unused.
Change-Id: I9f94bd934ca7d2292de4c29bb89e17c940c7cd2a
Reviewed-on: https://boringssl-review.googlesource.com/6173
Reviewed-by: Adam Langley <alangley@gmail.com>
None of these methods vary per group. Factoring these out of
|EC_METHOD| should help some toolchains to do a better job optimizing
the code for size.
Change-Id: Ibd22a52992b4d549f12a8d22bddfdb3051aaa891
Reviewed-on: https://boringssl-review.googlesource.com/6172
Reviewed-by: Adam Langley <alangley@gmail.com>
The tests in crypto/cipher/test/chacha20_poly1305_deprecated_tests.txt
were adapted to the RFC 7539 AEAD construction by recalculating the tags.
Also a few additional vectors were added. These vectors were verified
against nettle. See
feb7292bf1.
Change-Id: Ib3f2797d5825bc1e32c55f845b5070b6993e4aff
Reviewed-on: https://boringssl-review.googlesource.com/6144
Reviewed-by: Adam Langley <alangley@gmail.com>
This change reduces unnecessary copying and makes the pre-RFC-7539
nonces 96 bits just like the AES-GCM, AES-CCM, and RFC 7539
ChaCha20-Poly1305 cipher suites. Also, all the symbols related to
the pre-RFC-7539 cipher suites now have "_OLD" appended, in
preparation for adding the RFC 7539 variants.
Change-Id: I1f85bd825b383c3134df0b6214266069ded029ae
Reviewed-on: https://boringssl-review.googlesource.com/6103
Reviewed-by: Adam Langley <alangley@gmail.com>
The new function |CRYPTO_chacha_96_bit_nonce_from_64_bit_nonce| can be
used to adapt code from that uses 64 bit nonces, in a way that is
compatible with the old semantics.
Change-Id: I83d5b2d482e006e82982f58c9f981e8078c3e1b0
Reviewed-on: https://boringssl-review.googlesource.com/6100
Reviewed-by: Adam Langley <alangley@gmail.com>
It seems OS X actually cares about symbol resolution and dependencies
when you create a dylib. Probably because they do two-level name
resolution.
(Obligatory disclaimer: BoringSSL does not have a stable ABI and is thus
not suitable for a traditional system-wide library.)
BUG=539603
Change-Id: Ic26c4ad23840fe6c1f4825c44671e74dd2e33870
Reviewed-on: https://boringssl-review.googlesource.com/6131
Reviewed-by: Adam Langley <alangley@gmail.com>
Also, organize the links in BUILDING.md sensibly.
Change-Id: Ie9c65750849fcdab7a6a6bf11d1c9cdafb53bc00
Reviewed-on: https://boringssl-review.googlesource.com/6140
Reviewed-by: Adam Langley <alangley@gmail.com>
gcm_test.cc needs to access the internal GCM symbols. This is
unfortunate because it means that they have to be marked OPENSSL_EXPORT
just for this.
To compensate, modes.h is removed and its contents copied into
crypto/modes/internal.h.
Change-Id: I1777b2ef8afd154c43417137673a28598a7ec30e
Reviewed-on: https://boringssl-review.googlesource.com/6360
Reviewed-by: Adam Langley <alangley@gmail.com>
This reverts commit b9c26014de.
The win64 bot seems unhappy. Will sniff at it tomorrow. In
the meantime, get the tree green again.
Change-Id: I058ddb3ec549beee7eabb2f3f72feb0a4a5143b2
Reviewed-on: https://boringssl-review.googlesource.com/6353
Reviewed-by: Adam Langley <alangley@gmail.com>
This removes the confusion about whether |gcm128_context| copies the
key (it didn't) or whether the caller is responsible for keeping the
key alive for the lifetime of the |gcm128_context| (it was).
Change-Id: Ia0ad0a8223e664381fbbfb56570b2545f51cad9f
Reviewed-on: https://boringssl-review.googlesource.com/6053
Reviewed-by: Adam Langley <alangley@gmail.com>
The key is never modified through the key pointer member, and the
calling code relies on that fact for maintaining its own
const-correctness.
Change-Id: I63946451aa7c400cd127895a61c30d9a647b1b8c
Reviewed-on: https://boringssl-review.googlesource.com/6040
Reviewed-by: Adam Langley <alangley@gmail.com>
MSVC was warning about the assignment in the |if| condition. Also, the
formatting of the negative number made it look like a subtraction.
Finally, what was being calculated was unclear.
Change-Id: If56c672302c638aac6a87f715e8dcbb87ecb56ed
Reviewed-on: https://boringssl-review.googlesource.com/6212
Reviewed-by: Adam Langley <alangley@gmail.com>
This removes a hard link-time dependency on the SHA-1 code. The code
was self-contradictory in whether it defaulted to SHA-1 or refused to
default to SHA-1.
Change-Id: I5ad7949bdd529df568904f87870313e3d8a57e72
Reviewed-on: https://boringssl-review.googlesource.com/5833
Reviewed-by: Adam Langley <alangley@gmail.com>
∙ host:port parsing, where unavoidable, is now IPv6-friendly.
∙ |BIO_C_GET_CONNECT| is simply removed.
∙ bssl -accept now listens on both IPv6 and IPv4.
Change-Id: I1cbd8a79c0199bab3ced4c4fd79d2cc5240f250c
Reviewed-on: https://boringssl-review.googlesource.com/6214
Reviewed-by: Adam Langley <alangley@gmail.com>
It's very annoying having to remember the right incant every time I want
to switch around between my build, build-release, build-asan, etc.,
output directories.
Unfortunately, this target is pretty unfriendly without CMake 3.2+ (and
Ninja 1.5+). This combination gives a USES_TERMINAL flag to
add_custom_target which uses Ninja's "console" pool, otherwise the
output buffering gets in the way. Ubuntu LTS is still on an older CMake,
so do a version check in the meantime.
CMake also has its own test mechanism (CTest), but this doesn't use it.
It seems to prefer knowing what all the tests are and then tries to do
its own output management and parallelizing and such. We already have
our own runners. all_tests.go could actually be converted tidily, but
generate_build_files.py also needs to read it, and runner.go has very
specific needs.
Naming the target ninja -C build test would be nice, but CTest squats
that name and CMake grumps when you use a reserved name, so I've gone
with run_tests.
Change-Id: Ibd20ebd50febe1b4e91bb19921f3bbbd9fbcf66c
Reviewed-on: https://boringssl-review.googlesource.com/6270
Reviewed-by: Adam Langley <alangley@gmail.com>
Since we pre-generate our perlasm, having the output of these files be
sensitive to the environment the run in is unhelpful. It would be bad to
suddenly change what features we do or don't compile in whenever workstations'
toolchains change.
Enable all compiler-version-gated features as they should all be runtime-gated
anyway. This should align with what upstream's files would have produced on
modern toolschains. We should assume our assemblers can take whatever we'd like
to throw at them. (If it turns out some can't, we'd rather find out and
probably switch the problematic instructions to explicit byte sequences.)
This actually results in a fairly significant change to the assembly we
generate. I'm guessing upstream's buildsystem sets the CC environment variable,
while ours doesn't and so the version checks were all coming out conservative.
diffstat of generated files:
linux-x86/crypto/sha/sha1-586.S | 1176 ++++++++++++
linux-x86/crypto/sha/sha256-586.S | 2248 ++++++++++++++++++++++++
linux-x86_64/crypto/bn/rsaz-avx2.S | 1644 +++++++++++++++++
linux-x86_64/crypto/bn/rsaz-x86_64.S | 638 ++++++
linux-x86_64/crypto/bn/x86_64-mont.S | 332 +++
linux-x86_64/crypto/bn/x86_64-mont5.S | 1130 ++++++++++++
linux-x86_64/crypto/modes/aesni-gcm-x86_64.S | 754 ++++++++
linux-x86_64/crypto/modes/ghash-x86_64.S | 475 +++++
linux-x86_64/crypto/sha/sha1-x86_64.S | 1121 ++++++++++++
linux-x86_64/crypto/sha/sha256-x86_64.S | 1062 +++++++++++
linux-x86_64/crypto/sha/sha512-x86_64.S | 2241 ++++++++++++++++++++++++
mac-x86/crypto/sha/sha1-586.S | 1174 ++++++++++++
mac-x86/crypto/sha/sha256-586.S | 2248 ++++++++++++++++++++++++
mac-x86_64/crypto/bn/rsaz-avx2.S | 1637 +++++++++++++++++
mac-x86_64/crypto/bn/rsaz-x86_64.S | 638 ++++++
mac-x86_64/crypto/bn/x86_64-mont.S | 331 +++
mac-x86_64/crypto/bn/x86_64-mont5.S | 1130 ++++++++++++
mac-x86_64/crypto/modes/aesni-gcm-x86_64.S | 750 ++++++++
mac-x86_64/crypto/modes/ghash-x86_64.S | 475 +++++
mac-x86_64/crypto/sha/sha1-x86_64.S | 1121 ++++++++++++
mac-x86_64/crypto/sha/sha256-x86_64.S | 1062 +++++++++++
mac-x86_64/crypto/sha/sha512-x86_64.S | 2241 ++++++++++++++++++++++++
win-x86/crypto/sha/sha1-586.asm | 1173 ++++++++++++
win-x86/crypto/sha/sha256-586.asm | 2248 ++++++++++++++++++++++++
win-x86_64/crypto/bn/rsaz-avx2.asm | 1858 +++++++++++++++++++-
win-x86_64/crypto/bn/rsaz-x86_64.asm | 638 ++++++
win-x86_64/crypto/bn/x86_64-mont.asm | 352 +++
win-x86_64/crypto/bn/x86_64-mont5.asm | 1184 ++++++++++++
win-x86_64/crypto/modes/aesni-gcm-x86_64.asm | 933 ++++++++++
win-x86_64/crypto/modes/ghash-x86_64.asm | 515 +++++
win-x86_64/crypto/sha/sha1-x86_64.asm | 1152 ++++++++++++
win-x86_64/crypto/sha/sha256-x86_64.asm | 1088 +++++++++++
win-x86_64/crypto/sha/sha512-x86_64.asm | 2499 ++++++
SHA* gets faster. RSA and AES-GCM seem to be more of a wash and even slower
sometimes! This is a little concerning. Though when I repeated the latter two,
it's definitely noisy (RSA in particular), so we may wish to repeat in a more
controlled environment. We could also flip some of these toggles to something
other than the highest setting if it seems some of the variants aren't
desirable. We just shouldn't have them enabled or disabled on accident. This
aligns us closer to upstream though.
$ /tmp/bssl.old speed SHA-
Did 5028000 SHA-1 (16 bytes) operations in 1000048us (5027758.7 ops/sec): 80.4 MB/s
Did 1708000 SHA-1 (256 bytes) operations in 1000257us (1707561.2 ops/sec): 437.1 MB/s
Did 73000 SHA-1 (8192 bytes) operations in 1008406us (72391.5 ops/sec): 593.0 MB/s
Did 3041000 SHA-256 (16 bytes) operations in 1000311us (3040054.5 ops/sec): 48.6 MB/s
Did 779000 SHA-256 (256 bytes) operations in 1000820us (778361.7 ops/sec): 199.3 MB/s
Did 26000 SHA-256 (8192 bytes) operations in 1009875us (25745.8 ops/sec): 210.9 MB/s
Did 1837000 SHA-512 (16 bytes) operations in 1000251us (1836539.0 ops/sec): 29.4 MB/s
Did 803000 SHA-512 (256 bytes) operations in 1000969us (802222.6 ops/sec): 205.4 MB/s
Did 41000 SHA-512 (8192 bytes) operations in 1016768us (40323.8 ops/sec): 330.3 MB/s
$ /tmp/bssl.new speed SHA-
Did 5354000 SHA-1 (16 bytes) operations in 1000104us (5353443.2 ops/sec): 85.7 MB/s
Did 1779000 SHA-1 (256 bytes) operations in 1000121us (1778784.8 ops/sec): 455.4 MB/s
Did 87000 SHA-1 (8192 bytes) operations in 1012641us (85914.0 ops/sec): 703.8 MB/s
Did 3517000 SHA-256 (16 bytes) operations in 1000114us (3516599.1 ops/sec): 56.3 MB/s
Did 935000 SHA-256 (256 bytes) operations in 1000096us (934910.2 ops/sec): 239.3 MB/s
Did 38000 SHA-256 (8192 bytes) operations in 1004476us (37830.7 ops/sec): 309.9 MB/s
Did 2930000 SHA-512 (16 bytes) operations in 1000259us (2929241.3 ops/sec): 46.9 MB/s
Did 1008000 SHA-512 (256 bytes) operations in 1000509us (1007487.2 ops/sec): 257.9 MB/s
Did 45000 SHA-512 (8192 bytes) operations in 1000593us (44973.3 ops/sec): 368.4 MB/s
$ /tmp/bssl.old speed RSA
Did 820 RSA 2048 signing operations in 1017008us (806.3 ops/sec)
Did 27000 RSA 2048 verify operations in 1015400us (26590.5 ops/sec)
Did 1292 RSA 2048 (3 prime, e=3) signing operations in 1008185us (1281.5 ops/sec)
Did 65000 RSA 2048 (3 prime, e=3) verify operations in 1011388us (64268.1 ops/sec)
Did 120 RSA 4096 signing operations in 1061027us (113.1 ops/sec)
Did 8208 RSA 4096 verify operations in 1002717us (8185.8 ops/sec)
$ /tmp/bssl.new speed RSA
Did 760 RSA 2048 signing operations in 1003351us (757.5 ops/sec)
Did 25900 RSA 2048 verify operations in 1028931us (25171.8 ops/sec)
Did 1320 RSA 2048 (3 prime, e=3) signing operations in 1040806us (1268.2 ops/sec)
Did 63000 RSA 2048 (3 prime, e=3) verify operations in 1016042us (62005.3 ops/sec)
Did 104 RSA 4096 signing operations in 1008718us (103.1 ops/sec)
Did 6875 RSA 4096 verify operations in 1093441us (6287.5 ops/sec)
$ /tmp/bssl.old speed GCM
Did 5316000 AES-128-GCM (16 bytes) seal operations in 1000082us (5315564.1 ops/sec): 85.0 MB/s
Did 712000 AES-128-GCM (1350 bytes) seal operations in 1000252us (711820.6 ops/sec): 961.0 MB/s
Did 149000 AES-128-GCM (8192 bytes) seal operations in 1003182us (148527.4 ops/sec): 1216.7 MB/s
Did 5919750 AES-256-GCM (16 bytes) seal operations in 1000016us (5919655.3 ops/sec): 94.7 MB/s
Did 800000 AES-256-GCM (1350 bytes) seal operations in 1000951us (799239.9 ops/sec): 1079.0 MB/s
Did 152000 AES-256-GCM (8192 bytes) seal operations in 1000765us (151883.8 ops/sec): 1244.2 MB/s
$ /tmp/bssl.new speed GCM
Did 5315000 AES-128-GCM (16 bytes) seal operations in 1000125us (5314335.7 ops/sec): 85.0 MB/s
Did 755000 AES-128-GCM (1350 bytes) seal operations in 1000878us (754337.7 ops/sec): 1018.4 MB/s
Did 151000 AES-128-GCM (8192 bytes) seal operations in 1005655us (150150.9 ops/sec): 1230.0 MB/s
Did 5913500 AES-256-GCM (16 bytes) seal operations in 1000041us (5913257.6 ops/sec): 94.6 MB/s
Did 782000 AES-256-GCM (1350 bytes) seal operations in 1001484us (780841.2 ops/sec): 1054.1 MB/s
Did 121000 AES-256-GCM (8192 bytes) seal operations in 1006389us (120231.8 ops/sec): 984.9 MB/s
Change-Id: I0efb32f896c597abc7d7e55c31d038528a5c72a1
Reviewed-on: https://boringssl-review.googlesource.com/6260
Reviewed-by: Adam Langley <alangley@gmail.com>
We haven't tested it yet, but it was only disabled on 64-bit. Disable it on
32-bit as well until we're ready to turn it on.
Change-Id: I50e74aef2c5c3ba539a868c2bb6fb90fdf28a5f0
Reviewed-on: https://boringssl-review.googlesource.com/6271
Reviewed-by: Adam Langley <alangley@gmail.com>
We missed 7eb9680ae1bf5dd9aeb61c401f2c3bd900ac9aeb. This is a no-op as we don't
set shaext right now anyway. This also includes some cosmetic changes to
minimize the diff with upstream. ("cosmetic". Upstream's perl doesn't like
spaces.)
Change-Id: I17fa663ddaa38c27854d4f59fb83960528d9ba78
Reviewed-on: https://boringssl-review.googlesource.com/6250
Reviewed-by: Adam Langley <alangley@gmail.com>
I was a little bit too lazy in error handling here.
Change-Id: I9954957d41d610e715c1976a921dedeb8cb49d40
Reviewed-on: https://boringssl-review.googlesource.com/6240
Reviewed-by: Adam Langley <alangley@gmail.com>
There's still a size_t/int cast due to the mass of legacy code, but at
least avoid the most egregious case.
Change-Id: Icc1741366e09190216e762ca7ef42ecfc3215edc
Reviewed-on: https://boringssl-review.googlesource.com/6345
Reviewed-by: Adam Langley <alangley@gmail.com>
One less exported function. Nothing ever stack-allocates them, within BoringSSL
or in consumers. This avoids the slightly odd mechanism where BN_MONT_CTX_free
might or might not free the BN_MONT_CTX itself based on a flag.
(This is also consistent with OpenSSL 1.1.x which does away with the _init
variants of both this and BIGNUM so it shouldn't be a compatibility concern
long-term either.)
Change-Id: Id885ae35a26f75686cc68a8aa971e2ea6767ba88
Reviewed-on: https://boringssl-review.googlesource.com/6350
Reviewed-by: Adam Langley <alangley@gmail.com>
Missed a few the last time around.
Change-Id: I42fd57566d64fa1c41cba14573742d42468cc07d
Reviewed-on: https://boringssl-review.googlesource.com/6349
Reviewed-by: Adam Langley <alangley@gmail.com>
It would set gen->d.dirn to a freed pointer in case X509V3_NAME_from_section
failed.
(Imported from upstream's ea9de25f2f577db69d67c39e5cf60be7da17c931.)
This only affects the various config file parsing bits.
Change-Id: I530c09be81bfb40bca931c064c39cbc93dfd454f
Reviewed-on: https://boringssl-review.googlesource.com/6348
Reviewed-by: Adam Langley <alangley@gmail.com>
See also upstream's b62a2f8a373d1889672599834acf95161f2883ce, though
upstream left the lock calls in by accident. Otherwise, the change
appears to be correct. I see no side effects of x509_object_idx_cnt
beyond the return value and *pnmatch, both of which are discarded.
Change-Id: Ic2124a733a61591bd1b264164726ce6c69ce10c9
Reviewed-on: https://boringssl-review.googlesource.com/6347
Reviewed-by: Adam Langley <alangley@gmail.com>
CRYPTO_MUTEX_init needs a CRYPTO_MUTEX_cleanup. Also a pile of problems
with x509_lu.c I noticed trying to import some upstream change.
Change-Id: I029a65cd2d30aa31f4832e8fbfe5b2ea0dbc66fe
Reviewed-on: https://boringssl-review.googlesource.com/6346
Reviewed-by: Adam Langley <alangley@gmail.com>
See also upstream's b62a2f8a373d1889672599834acf95161f2883ce.
Change-Id: I430be5ec21198484b8a874460b224e15bafafe48
Reviewed-on: https://boringssl-review.googlesource.com/6344
Reviewed-by: Adam Langley <alangley@gmail.com>
This compiled, so I guess everything we care about can do C++-style
comments, but better be uniform.
Change-Id: I9950c2df93cd81bb2bddb3a1e14e2de02c7e4807
Reviewed-on: https://boringssl-review.googlesource.com/6304
Reviewed-by: Adam Langley <alangley@gmail.com>
Don't mark a certificate as self-signed if keyUsage is present and
certificate signing is not asserted.
PR#3979
(Imported from upstream's e272f8ef8f63298466494adcd29512797ab1eece.)
Change-Id: I3120832f32455e8e099708fa2491d85d3d4a3930
Reviewed-on: https://boringssl-review.googlesource.com/6341
Reviewed-by: Adam Langley <alangley@gmail.com>
Some ARM environments don't support |getauxval| or signals and need to
configure the capabilities of the chip at compile time. This change adds
defines that allow them to do so.
Change-Id: I4e6987f69dd13444029bc7ac7ed4dbf8fb1faa76
Reviewed-on: https://boringssl-review.googlesource.com/6280
Reviewed-by: Adam Langley <agl@google.com>
Start converting the ones we can right now. Some of the messier ones
resize init_buf rather than assume the initial size is sufficient, so
those will probably wait until init_buf is gone and the handshake's
undergone some more invasive surgery. The async ones will also require
some thought. But some can be incrementally converted now.
BUG=468889
Change-Id: I0bc22e4dca37d9d671a488c42eba864c51933638
Reviewed-on: https://boringssl-review.googlesource.com/6190
Reviewed-by: Adam Langley <alangley@gmail.com>
This extends 79c59a30 to |RSA_public_encrypt|, |RSA_private_encrypt|,
and |RSA_public_decrypt|. It benefits Conscrypt, which expects these
functions to have the same signature as |RSA_public_private_decrypt|.
Change-Id: Id1ce3118e8f20a9f43fd4f7bfc478c72a0c64e4b
Reviewed-on: https://boringssl-review.googlesource.com/6286
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
The warning is:
C4210: nonstandard extension used : function given file scope.
It is caused by function declarations that aren't at the top level in a
file.
Change-Id: Ib1c2ae64e15e66eb0a7255a29c0e560fbf55c2b2
Reviewed-on: https://boringssl-review.googlesource.com/6210
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
Change-Id: I48885402b88309bb514554d209e1827d31738756
Reviewed-on: https://boringssl-review.googlesource.com/6211
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <alangley@gmail.com>
Reviewed-by: Adam Langley <agl@google.com>
OpenSSL's BIO_get_fd returns the fd or -1, not a boolean.
Change-Id: I12a3429c71bb9c9064f9f91329a88923025f1fb5
Reviewed-on: https://boringssl-review.googlesource.com/6080
Reviewed-by: Adam Langley <agl@google.com>
The goto always jumps into the loop so the for's initialisation
expression can never be executed. Clang warns about this.
Change-Id: I3c3d4b8430754099e9ca6fd20101868c40165245
This imports the Google-authored P-224 implementation by Emilia Käsper
and Bodo Möller that is also in upstream OpenSSL.
Change-Id: I16005c74a2a3e374fb136d36f3f6569dab9d8919
Reviewed-on: https://boringssl-review.googlesource.com/6145
Reviewed-by: Adam Langley <agl@google.com>
BUF_memdup tries to avoid mallocing zero bytes (and thus unduly
returning an error for a NULL return value) by testing whether the input
buffer is NULL. This goes back to the original OpenSSL code.
However, when |ext_npn_parse_serverhello| tries to use |BUF_memdup| to
copy an NPN value returned by a callback, some callbacks just set the
output /length/ to zero to indicate an empty value. Thus, when
|BUF_memdup| tests the pointer, it's an uninitialised value and MSan
throws an error.
Since passing a NULL pointer to |BUF_memdup| better imply that the
length is zero, while the reverse empirically isn't true, testing the
length seems safer.
Change-Id: I06626f7dfb761de631fd997bda60057b76b8da94
Previously a value of 0 would be accepted and intepreted as equivalent
to 1. This contradicts RFC 2898 which defines:
iterationCount INTEGER (1..MAX),
BUG=https://crbug.com/534961
Change-Id: I89623980f99fde3ca3780880d311955d3f6fe0b5
Reviewed-on: https://boringssl-review.googlesource.com/5971
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
Change-Id: I36b2bb0e10c627ae6efa9d133df53b814922e652
Reviewed-on: https://boringssl-review.googlesource.com/6051
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
2ab24a2d40 added sections to ARM assembly
files. However, in cases where .align directives were not next to the
labels that they were intended to apply to, the section directives would
cause them to be ignored.
Change-Id: I32117f6747ff8545b80c70dd3b8effdc6e6f67e0
Reviewed-on: https://boringssl-review.googlesource.com/6050
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
This utility function is provided for API-compatibility and simply calls
|PKCS12_parse| internally.
BUG=536939
Change-Id: I86c548e5dfd64b6c473e497b95adfa5947fe9529
Reviewed-on: https://boringssl-review.googlesource.com/6008
Reviewed-by: Adam Langley <agl@google.com>
The ChaCha20 ARM asm is generated from GCC. This change updates the GCC
command line to include -ffunction-sections, which causes GCC to put
each function in its own section so that the linker with --gc-sections
can trim unused functions.
Since the file only has a single function, this is a bit useless, but
it'll now be consistent with the other ARM asm.
Change-Id: If12c675700310ea55af817b5433844eeffc9d029
Reviewed-on: https://boringssl-review.googlesource.com/6006
Reviewed-by: Adam Langley <agl@google.com>
This code isn't generated by perlasm and so the section directives need
to be added manually.
Change-Id: I46158741743859679decbce99097fe6071bf8012
Reviewed-on: https://boringssl-review.googlesource.com/6005
Reviewed-by: Adam Langley <agl@google.com>
To avoid too much #if soup, e_aes.c uses a lot of dummy functions that
just call |abort|. This change makes them all static, which they should
have been all along.
Change-Id: I696f8a0560cf99631ed7adb42d1af10003db4a63
Reviewed-on: https://boringssl-review.googlesource.com/6004
Reviewed-by: Adam Langley <agl@google.com>
This change causes each global arm or aarch64 asm function to be put
into its own section by default. This matches the behaviour of the
-ffunction-sections option to GCC and allows the --gc-sections option to
the linker to discard unused asm functions on a function-by-function
basis.
Sometimes several asm functions will share the same data an, in that
situation, the data is put into the section of one of the functions and
the section of the other function is merged with the added
“.global_with_section” directive.
Change-Id: I12c9b844d48d104d28beb816764358551eac4456
Reviewed-on: https://boringssl-review.googlesource.com/6003
Reviewed-by: Adam Langley <agl@google.com>
Also add an assert to that effect.
Change-Id: I1bd0571e3889f1cba968fd99041121ac42ee9e89
Reviewed-on: https://boringssl-review.googlesource.com/5990
Reviewed-by: Adam Langley <agl@google.com>
Although the previous commit should ensure this doesn't happen, the
uint8_t** pattern is very error-prone and we're trying to avoid doing
much to the legacy ASN.1 stack. To that end, maintaining the strong
exception guarantee w.r.t. the input pointer-pointer is best effort and
we won't rely on it, so we needn't spend our time chasing down problems.
Change-Id: Ib78974eb94377fe0b0b379f57d9695dc81f344bb
Reviewed-on: https://boringssl-review.googlesource.com/5949
Reviewed-by: Adam Langley <agl@google.com>
(Imported from upstream's 728bcd59d3d41e152aead0d15acc51a8958536d3.)
Actually this one was reported by us, but the commit message doesn't
mention this.
This is slightly modified from upstream's version to fix some problems
noticed in import. Specifically one of d2i_X509_AUX's success paths is
bust and d2i_PrivateKey still updates on one error path. Resolve the
latter by changing both it and d2i_AutoPrivateKey to explicitly hit the
error path on ret == NULL. This lets us remove the NULL check in
d2i_AutoPrivateKey.
We'll want to report the problems back upstream.
Change-Id: Ifcfc965ca6d5ec0a08ac154854bd351cafbaba25
Reviewed-on: https://boringssl-review.googlesource.com/5948
Reviewed-by: Adam Langley <agl@google.com>
This fixes an issue with Clang, which doesn't like static functions that
aren't used (to its eyes).
Change-Id: I7cb055aa9f0ab3934352c105abe45f9c30990250
This change causes ARM and Aarch64 to use the ARMv8 AES instructions, if
provided by the current CPU.
Change-Id: I50cb36270139fcf4ce42e5ebb8afe24ffcab22e3
Reviewed-on: https://boringssl-review.googlesource.com/6002
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
By doing this the compiler can notice that much of the code is unused in
the case that we know that we can't have a hardware RNG (i.e. ARM).
Change-Id: I72d364a30080364d700f855640e0164c2c62f0de
Reviewed-on: https://boringssl-review.googlesource.com/6001
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
∙ Some comments had the wrong function name at the beginning.
∙ Some ARM asm ended up with two #if defined(__arm__) lines – one from
the .pl file and one inserted by the translation script.
Change-Id: Ia8032cd09f06a899bf205feebc2d535a5078b521
Reviewed-on: https://boringssl-review.googlesource.com/6000
Reviewed-by: Adam Langley <agl@google.com>
Avoid using cnid = 0, use NID_undef instead, and return early instead of
trying to find an instance of that in the subject DN.
(Imported from upstrea's 40d5689458593aeca0d1a7f3591f7ccb48e459ac.)
Change-Id: I1bdf6bf7a4b1f4774a8dbec7e5df421b3a27c7e4
Reviewed-on: https://boringssl-review.googlesource.com/5947
Reviewed-by: Adam Langley <agl@google.com>
- Pass in the right ciphertext length to ensure we're indeed testing
ciphertext corruption (and not truncation).
- Only test one mutation per byte to not make the test too slow.
- Add a separate test for truncated ciphertexts.
(Imported from upstream's 5f623eb61655688501cb1817a7ad0592299d894a.)
Change-Id: I425a77668beac9d391387e3afad8d15ae387468f
Reviewed-on: https://boringssl-review.googlesource.com/5945
Reviewed-by: Adam Langley <agl@google.com>
Not content with signing negative RSA moduli, still other Estonian IDs have too
many leading zeros. Work around those too.
This workaround will be removed in six months.
BUG=534766
Change-Id: Ica23b1b1499f9dbe39e94cf7b540900860e8e135
Reviewed-on: https://boringssl-review.googlesource.com/5980
Reviewed-by: Adam Langley <agl@google.com>
EVP_MD_CTX_copy_ex was implemented with a memcpy, which doesn't work well when
some of the pointers need to be copied, and ssl_verify_cert_chain didn't
account for set_ex_data failing.
Change-Id: Ieb556aeda6ab2e4c810f27012fefb1e65f860023
Reviewed-on: https://boringssl-review.googlesource.com/5911
Reviewed-by: Adam Langley <agl@google.com>
Target date for removal of the workaround is 6 months.
BUG=532048
Change-Id: I402f75e46736936725575559cd8eb194115ab0df
Reviewed-on: https://boringssl-review.googlesource.com/5910
Reviewed-by: Adam Langley <agl@google.com>
The documentation for |ECDSA_sign| and |ECDSA_verify| says that the
|type| parameter should be zero.
Change-Id: I875d3405455c5443f5a5a5c2960a9a9f486ca5bb
Reviewed-on: https://boringssl-review.googlesource.com/5832
Reviewed-by: Adam Langley <agl@google.com>
Estonian IDs issued between September 2014 to September 2015 are broken and use
negative moduli. They last five years and are common enough that we need to
work around this bug.
Add parallel "buggy" versions of BN_cbs2unsigned and RSA_parse_public_key which
tolerate this mistake, to align with OpenSSL's previous behavior. This code is
currently hooked up to rsa_pub_decode in RSA_ASN1_METHOD so that d2i_X509 is
tolerant. (This isn't a huge deal as the rest of that stack still uses the
legacy ASN.1 code which is overly lenient in many other ways.)
In future, when Chromium isn't using crypto/x509 and has more unified
certificate handling code, we can put client certificates under a slightly
different codepath, so this needn't hold for all certificates forever. Then in
September 2019, when the broken Estonian certificates all expire, we can purge
this codepath altogether.
BUG=532048
Change-Id: Iadb245048c71dba2eec45dd066c4a6e077140751
Reviewed-on: https://boringssl-review.googlesource.com/5894
Reviewed-by: Adam Langley <agl@google.com>
We were getting this because of C's defaults, but it's fragile to leave
it like this because someone may add another field at the end in the
future.
Change-Id: I8b2dcbbc7cee8062915d15101f99f5a1aae6ad87
Reviewed-on: https://boringssl-review.googlesource.com/5860
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
It didn't do too much and I didn't notice that CRYPTO_sysrand wasn't
OPENSSL_EXPORTed, which makes the test impossible on shared-library
builds.
Change-Id: I38986572aa34fa9c0f30075d562b8ee4e1a0c8b8
Callers that lack hardware random may obtain a speed improvement by
calling |RAND_enable_fork_unsafe_buffering|, which enables a
thread-local buffer around reads from /dev/urandom.
Change-Id: I46e675d1679b20434dd520c58ece0f888f38a241
Reviewed-on: https://boringssl-review.googlesource.com/5792
Reviewed-by: Adam Langley <agl@google.com>
History has shown there are bugs in not setting the error code
appropriately, which makes any decision making based on
|ERR_peek_last_error|, etc. suspect. Also, this call was interfering
with the link-time optimizer's ability to discard the implementations of
many functions in crypto/err during dead code elimination.
Change-Id: Iba9e553bf0a72a1370ceb17ff275f5a20fca31ec
Reviewed-on: https://boringssl-review.googlesource.com/5748
Reviewed-by: Adam Langley <agl@google.com>
This is useful to skip an optional element, and mirrors the behaviour of
CBS_get_optional_asn1_octet_string.
Change-Id: Icb538c5e99a1d4e46412cae3c438184a94fab339
Reviewed-on: https://boringssl-review.googlesource.com/5800
Reviewed-by: Adam Langley <agl@google.com>
If the two extensions select different next protocols (quite possible since one
is server-selected and the other is client-selected), things will break. This
matches the behavior of NSS (Firefox) and Go.
Change-Id: Ie1da97bf062b91a370c85c12bc61423220a22f36
Reviewed-on: https://boringssl-review.googlesource.com/5780
Reviewed-by: Adam Langley <agl@google.com>
Don't dereference |d| when |top| is zero. Also test that various BIGNUM
methods behave correctly on zero/even inputs.
(Imported from upstream's cf633fa00244e39eea2f2c0b623f7d5bbefa904e.)
We already had the BN_div and BN_MONT_CTX_set tests, but align them with
upstream's for consistency.
Change-Id: Ice5d04f559b4d5672e23c400637c07d8ee401727
Reviewed-on: https://boringssl-review.googlesource.com/5783
Reviewed-by: Adam Langley <agl@google.com>
BN_rand generates a single-word zero BIGNUM with quite a large
probability.
A zero BIGNUM in turn will end up having a NULL |d|-buffer, which we
shouldn't dereference without checking.
(Imported from upstream's 9c989aaa749d88b63bef5d5beeb3046eae62d836.)
Change-Id: Ic4d113e4fcf4ea4c0a4e905a1c4ba3fb758d9fc6
Reviewed-on: https://boringssl-review.googlesource.com/5782
Reviewed-by: Adam Langley <agl@google.com>
If the seed value for dsa key generation is too short (< qsize),
return an error.
(Imported from upstream's 1d7df236dcb4f7c95707110753e5e77b19b9a0aa and
df1565ed9cebb6933ee7c6e762abcfefd1cd3846.)
This switches the trigger for random seed from seed_len = 0 to seed_in =
NULL.
Change-Id: I2e07abed754c57ef9d96b02a52ba6d260c3f5fb9
Reviewed-on: https://boringssl-review.googlesource.com/5781
Reviewed-by: Adam Langley <agl@google.com>
See also upstream's c8491de393639dbc4508306b7dbedb3872b74293.
Change-Id: I017fb137d6d93b6abb82fdb03f02be8292963d0d
Reviewed-on: https://boringssl-review.googlesource.com/5767
Reviewed-by: Adam Langley <agl@google.com>
It's supposed to be void*. The only reason this was working was that it was
only called in C which happily casts from void* to T*. (But if called in C++ in
a macro, it breaks.)
Change-Id: I7f765c3572b9b4815ae58da852be1e742de1bd96
Reviewed-on: https://boringssl-review.googlesource.com/5760
Reviewed-by: Adam Langley <agl@google.com>
This begins decoupling the transport from the SSL state machine. The buffering
logic is hidden behind an opaque API. Fields like ssl->packet and
ssl->packet_length are gone.
ssl3_get_record and dtls1_get_record now call low-level tls_open_record and
dtls_open_record functions that unpack a single record independent of who owns
the buffer. Both may be called in-place. This removes ssl->rstate which was
redundant with the buffer length.
Future work will push the buffer up the stack until it is above the handshake.
Then we can expose SSL_open and SSL_seal APIs which act like *_open_record but
return a slightly larger enum due to other events being possible. Likewise the
handshake state machine will be detached from its buffer. The existing
SSL_read, SSL_write, etc., APIs will be implemented on top of SSL_open, etc.,
combined with ssl_read_buffer_* and ssl_write_buffer_*. (Which is why
ssl_read_buffer_extend still tries to abstract between TLS's and DTLS's fairly
different needs.)
The new buffering logic does not support read-ahead (removed previously) since
it lacks a memmove on ssl_read_buffer_discard for TLS, but this could be added
if desired. The old buffering logic wasn't quite right anyway; it tried to
avoid the memmove in some cases and could get stuck too far into the buffer and
not accept records. (The only time the memmove is optional is in DTLS or if
enough of the record header is available to know that the entire next record
would fit in the buffer.)
The new logic also now actually decrypts the ciphertext in-place again, rather
than almost in-place when there's an explicit nonce/IV. (That accidentally
switched in https://boringssl-review.googlesource.com/#/c/4792/; see
3d59e04bce96474099ba76786a2337e99ae14505.)
BUG=468889
Change-Id: I403c1626253c46897f47c7ae93aeab1064b767b2
Reviewed-on: https://boringssl-review.googlesource.com/5715
Reviewed-by: Adam Langley <agl@google.com>
This consists mostly of re-adding OpenSSL's implementation of PBKDF2
(very loosely based upon e0d26bb3). The meat of it, namely
|PKCS5_PBKDF2_HMAC|, was already present, but unused.
In addition, |PKCS8_encrypt| and |PKCS8_decrypt| must be changed to
not perform UCS-2 conversion in the PBES2 case.
Change-Id: Id170ecabc43c79491600051147d1d6d3c7273dbc
Reviewed-on: https://boringssl-review.googlesource.com/5745
Reviewed-by: Adam Langley <agl@google.com>
arm_arch.h is included from ARM asm files, but lives in crypto/, not
openssl/include/. Since the asm files are often built from a different
location than their position in the source tree, relative include paths
are unlikely to work so, rather than having crypto/ be a de-facto,
second global include path, this change moves arm_arch.h to
include/openssl/.
It also removes entries from many include paths because they should be
needed as relative includes are always based on the locations of the
source file.
Change-Id: I638ff43d641ca043a4fc06c0d901b11c6ff73542
Reviewed-on: https://boringssl-review.googlesource.com/5746
Reviewed-by: Adam Langley <agl@google.com>
Match the other stack-allocated types in that we expose a wrapper function to
get them into the zero state. Makes it more amenable to templates like
ScopedOpenSSLContext.
Change-Id: Ibc7b2b1bc0421ce5ccc84760c78c0b143441ab0f
Reviewed-on: https://boringssl-review.googlesource.com/5753
Reviewed-by: Adam Langley <agl@google.com>
The fact that |value_free| expects to free() value->section is
inconsistent with the behavior of |add_string|, which adds a reference
to an existing string.
Along the way, add a |CONF_VALUE_new| method to simplify things a bit.
Change-Id: I438abc80575394e4d8df62a4fe2ff1050e3ba039
Reviewed-on: https://boringssl-review.googlesource.com/5744
Reviewed-by: Adam Langley <agl@google.com>
As I read it:
1. |_LHASH| contains
2. buckets of |LHASH_ITEMS|, which contain
3. |CONF_VALUE|s, which contain
4. various bits of data.
The previous code was freeing #1 and #2 in |lh_free|, and #4 in
|value_free_contents|, but was failing to free the |CONF_VALUE|s
themselves. The fix is to call |value_free| rather than
|value_free_contents|.
Change-Id: I1d5b48692ca9ac04df688e45d7fc113dc5cd6ddf
Reviewed-on: https://boringssl-review.googlesource.com/5742
Reviewed-by: Adam Langley <agl@google.com>
This change makes |EVP_PKEY_asn1_find_str|, which is used by
|PEM_read_bio_PrivateKey|, recognize "DSA" as well as "EC" and "RSA".
Change-Id: I39cce12f600cec6a71df75312a41f8395429af62
Reviewed-on: https://boringssl-review.googlesource.com/5743
Reviewed-by: Adam Langley <agl@google.com>
MSAN appears to have a bug that causes this code to be miscompiled when
compiled with optimisations. In order to prevent that bug from holding
everything up, this change disables that code when MEMORY_SANITIZER is
defined. The generic elliptic-curve code can pick up the slack in that
case.
Change-Id: I7ce26969b3ee0bc0b0496506f06a8cf9b2523cfa
(I couldn't find an authoritative source of test data, including in
OpenSSL's source, so I used OpenSSL's implementation to produce the
test ciphertext.)
This benefits globalplatform.
Change-Id: Ifb79e77afb7efed1c329126a1a459bbf7ce6ca00
Reviewed-on: https://boringssl-review.googlesource.com/5725
Reviewed-by: Adam Langley <agl@google.com>
Note that while |DES_ede2_cbc_encrypt| exists, I didn't use it: I
think it's easier to see what's happening this way.
(I couldn't find an authoritative source of test data, including in
OpenSSL's source, so I used OpenSSL's implementation to produce the
test ciphertext.)
This benefits globalplatform.
Change-Id: I7e17ca0b69067d7b3f4bc213b4616eb269882ae0
Reviewed-on: https://boringssl-review.googlesource.com/5724
Reviewed-by: Adam Langley <agl@google.com>
|DES_ecb_encrypt| was already present.
This benefits globalplatform.
Change-Id: I2ab41eb1936b3026439b5981fb27e29a12672b66
Reviewed-on: https://boringssl-review.googlesource.com/5723
Reviewed-by: Adam Langley <agl@google.com>
This is harmless, but it wasn't annoted with |(void)| so Coverity
complained about it.
Change-Id: Ie3405b0c0545944d49973d4bf29f8aeb6b965211
Reviewed-on: https://boringssl-review.googlesource.com/5612
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
If get_issuer fails, some of these calls return rather than jumping to common
cleanup code.
Change-Id: Iacd59747fb11e9bfaae86f2eeed88798ee08203e
Reviewed-on: https://boringssl-review.googlesource.com/5711
Reviewed-by: Adam Langley <agl@google.com>
(Imported from upstream's 25efcb44ac88ab34f60047e16a96c9462fad39c1 and
56353962e7da7e385c3d577581ccc3015ed6d1dc.)
Change-Id: I2ff22fc9da23868de02e6f31c50a3f1d0c6dec1a
Reviewed-on: https://boringssl-review.googlesource.com/5710
Reviewed-by: Adam Langley <agl@google.com>
The function BN_MONT_CTX_set was assuming that the modulus was non-zero
and therefore that |mod->top| > 0. In an error situation that may not be
the case and could cause a seg fault.
This is a follow on from CVE-2015-1794.
(Imported from upstream's 512368c9ed4d53fb230000e83071eb81bf628b22.)
The CVE itself doesn't affect us as the bit strength check in the DHE logic
excludes zero.
Also add tests to bn_test for a couple of division by zero cases. (This and
BN_div.)
Change-Id: Ibd8ef98d6be48eb95110021c23cd8e278656764d
Reviewed-on: https://boringssl-review.googlesource.com/5690
Reviewed-by: Adam Langley <agl@google.com>
BN_bin2bn takes a size_t as it should, but it passes that into bn_wexpand which
takes unsigned. Switch bn_wexpand and bn_expand to take size_t before they
check bounds against INT_MAX.
BIGNUM itself still uses int everywhere and we may want to audit all the
arithmetic at some point. Although I suspect having bn_expand require that the
number of bits fit in an int is sufficient to make everything happy, unless
we're doing interesting arithmetic on the number of bits somewhere.
Change-Id: Id191a4a095adb7c938cde6f5a28bee56644720c6
Reviewed-on: https://boringssl-review.googlesource.com/5680
Reviewed-by: Adam Langley <agl@google.com>
Move the bn_expand call inside decode_hex; it's an implementation detail of
hex-decoding. decode_dec instead works with BN_mul_word and BN_add_word so it
can just rely on BN internally expanding things and check the return value.
Also clean up the decode_hex loop so it's somewhat more readable and check for
INT_MAX in bn_x2bn. It uses int over size_t rather pervasively, but while I'm
here at least make that function check overflow.
BUG=517474
Change-Id: I4f043973ee43071a02ea5d4313a8fdaf12404e84
Reviewed-on: https://boringssl-review.googlesource.com/5679
Reviewed-by: Adam Langley <agl@google.com>
“!= 0” is implicit in if statements and it looks very weird here.
Change-Id: I7f4e71c479b8ff9821a040f1c542b15af19b8aed
Reviewed-on: https://boringssl-review.googlesource.com/5720
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
