/* Originally written by Bodo Moeller for the OpenSSL project. * ==================================================================== * Copyright (c) 1998-2005 The OpenSSL Project. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * * 3. All advertising materials mentioning features or use of this * software must display the following acknowledgment: * "This product includes software developed by the OpenSSL Project * for use in the OpenSSL Toolkit. (http://www.openssl.org/)" * * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to * endorse or promote products derived from this software without * prior written permission. For written permission, please contact * openssl-core@openssl.org. * * 5. Products derived from this software may not be called "OpenSSL" * nor may "OpenSSL" appear in their names without prior written * permission of the OpenSSL Project. * * 6. Redistributions of any form whatsoever must retain the following * acknowledgment: * "This product includes software developed by the OpenSSL Project * for use in the OpenSSL Toolkit (http://www.openssl.org/)" * * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED * OF THE POSSIBILITY OF SUCH DAMAGE. * ==================================================================== * * This product includes cryptographic software written by Eric Young * (eay@cryptsoft.com). This product includes software written by Tim * Hudson (tjh@cryptsoft.com). * */ /* ==================================================================== * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED. * * Portions of the attached software ("Contribution") are developed by * SUN MICROSYSTEMS, INC., and are contributed to the OpenSSL project. * * The Contribution is licensed pursuant to the OpenSSL open source * license provided above. * * The elliptic curve binary polynomial software is originally written by * Sheueling Chang Shantz and Douglas Stebila of Sun Microsystems * Laboratories. */ #ifndef OPENSSL_HEADER_EC_INTERNAL_H #define OPENSSL_HEADER_EC_INTERNAL_H #include #include #include #include #include #include "../bn/internal.h" #if defined(__cplusplus) extern "C" { #endif // Cap the size of all field elements and scalars, including custom curves, to // 66 bytes, large enough to fit secp521r1 and brainpoolP512r1, which appear to // be the largest fields anyone plausibly uses. #define EC_MAX_SCALAR_BYTES 66 #define EC_MAX_SCALAR_WORDS ((66 + BN_BYTES - 1) / BN_BYTES) OPENSSL_COMPILE_ASSERT(EC_MAX_SCALAR_WORDS <= BN_SMALL_MAX_WORDS, bn_small_functions_applicable); // An EC_SCALAR is an integer fully reduced modulo the order. Only the first // |order->top| words are used. An |EC_SCALAR| is specific to an |EC_GROUP| and // must not be mixed between groups. typedef union { // bytes is the representation of the scalar in little-endian order. uint8_t bytes[EC_MAX_SCALAR_BYTES]; BN_ULONG words[EC_MAX_SCALAR_WORDS]; } EC_SCALAR; struct ec_method_st { int (*group_init)(EC_GROUP *); void (*group_finish)(EC_GROUP *); int (*group_set_curve)(EC_GROUP *, const BIGNUM *p, const BIGNUM *a, const BIGNUM *b, BN_CTX *); int (*point_get_affine_coordinates)(const EC_GROUP *, const EC_POINT *, BIGNUM *x, BIGNUM *y, BN_CTX *); // Computes |r = g_scalar*generator + p_scalar*p| if |g_scalar| and |p_scalar| // are both non-null. Computes |r = g_scalar*generator| if |p_scalar| is null. // Computes |r = p_scalar*p| if g_scalar is null. At least one of |g_scalar| // and |p_scalar| must be non-null, and |p| must be non-null if |p_scalar| is // non-null. int (*mul)(const EC_GROUP *group, EC_POINT *r, const EC_SCALAR *g_scalar, const EC_POINT *p, const EC_SCALAR *p_scalar, BN_CTX *ctx); // 'field_mul' and 'field_sqr' can be used by 'add' and 'dbl' so that the // same implementations of point operations can be used with different // optimized implementations of expensive field operations: int (*field_mul)(const EC_GROUP *, BIGNUM *r, const BIGNUM *a, const BIGNUM *b, BN_CTX *); int (*field_sqr)(const EC_GROUP *, BIGNUM *r, const BIGNUM *a, BN_CTX *); int (*field_encode)(const EC_GROUP *, BIGNUM *r, const BIGNUM *a, BN_CTX *); // e.g. to Montgomery int (*field_decode)(const EC_GROUP *, BIGNUM *r, const BIGNUM *a, BN_CTX *); // e.g. from Montgomery } /* EC_METHOD */; const EC_METHOD *EC_GFp_mont_method(void); struct ec_group_st { const EC_METHOD *meth; // Unlike all other |EC_POINT|s, |generator| does not own |generator->group| // to avoid a reference cycle. EC_POINT *generator; BIGNUM order; int curve_name; // optional NID for named curve BN_MONT_CTX *order_mont; // data for ECDSA inverse // The following members are handled by the method functions, // even if they appear generic BIGNUM field; // For curves over GF(p), this is the modulus. BIGNUM a, b; // Curve coefficients. int a_is_minus3; // enable optimized point arithmetics for special case CRYPTO_refcount_t references; BN_MONT_CTX *mont; // Montgomery structure. BIGNUM one; // The value one. } /* EC_GROUP */; struct ec_point_st { // group is an owning reference to |group|, unless this is // |group->generator|. EC_GROUP *group; BIGNUM X; BIGNUM Y; BIGNUM Z; // Jacobian projective coordinates: // (X, Y, Z) represents (X/Z^2, Y/Z^3) if Z != 0 } /* EC_POINT */; EC_GROUP *ec_group_new(const EC_METHOD *meth); // ec_bignum_to_scalar converts |in| to an |EC_SCALAR| and writes it to // |*out|. It returns one on success and zero if |in| is out of range. int ec_bignum_to_scalar(const EC_GROUP *group, EC_SCALAR *out, const BIGNUM *in); // ec_bignum_to_scalar_unchecked behaves like |ec_bignum_to_scalar| but does not // check |in| is fully reduced. int ec_bignum_to_scalar_unchecked(const EC_GROUP *group, EC_SCALAR *out, const BIGNUM *in); // ec_random_nonzero_scalar sets |out| to a uniformly selected random value from // 1 to |group->order| - 1. It returns one on success and zero on error. int ec_random_nonzero_scalar(const EC_GROUP *group, EC_SCALAR *out, const uint8_t additional_data[32]); // ec_point_mul_scalar sets |r| to generator * |g_scalar| + |p| * // |p_scalar|. Unlike other functions which take |EC_SCALAR|, |g_scalar| and // |p_scalar| need not be fully reduced. They need only contain as many bits as // the order. int ec_point_mul_scalar(const EC_GROUP *group, EC_POINT *r, const EC_SCALAR *g_scalar, const EC_POINT *p, const EC_SCALAR *p_scalar, BN_CTX *ctx); int ec_wNAF_mul(const EC_GROUP *group, EC_POINT *r, const EC_SCALAR *g_scalar, const EC_POINT *p, const EC_SCALAR *p_scalar, BN_CTX *ctx); // method functions in simple.c int ec_GFp_simple_group_init(EC_GROUP *); void ec_GFp_simple_group_finish(EC_GROUP *); int ec_GFp_simple_group_set_curve(EC_GROUP *, const BIGNUM *p, const BIGNUM *a, const BIGNUM *b, BN_CTX *); int ec_GFp_simple_group_get_curve(const EC_GROUP *, BIGNUM *p, BIGNUM *a, BIGNUM *b, BN_CTX *); unsigned ec_GFp_simple_group_get_degree(const EC_GROUP *); int ec_GFp_simple_point_init(EC_POINT *); void ec_GFp_simple_point_finish(EC_POINT *); int ec_GFp_simple_point_copy(EC_POINT *, const EC_POINT *); int ec_GFp_simple_point_set_to_infinity(const EC_GROUP *, EC_POINT *); int ec_GFp_simple_set_Jprojective_coordinates_GFp(const EC_GROUP *, EC_POINT *, const BIGNUM *x, const BIGNUM *y, const BIGNUM *z, BN_CTX *); int ec_GFp_simple_point_set_affine_coordinates(const EC_GROUP *, EC_POINT *, const BIGNUM *x, const BIGNUM *y, BN_CTX *); int ec_GFp_simple_set_compressed_coordinates(const EC_GROUP *, EC_POINT *, const BIGNUM *x, int y_bit, BN_CTX *); int ec_GFp_simple_add(const EC_GROUP *, EC_POINT *r, const EC_POINT *a, const EC_POINT *b, BN_CTX *); int ec_GFp_simple_dbl(const EC_GROUP *, EC_POINT *r, const EC_POINT *a, BN_CTX *); int ec_GFp_simple_invert(const EC_GROUP *, EC_POINT *, BN_CTX *); int ec_GFp_simple_is_at_infinity(const EC_GROUP *, const EC_POINT *); int ec_GFp_simple_is_on_curve(const EC_GROUP *, const EC_POINT *, BN_CTX *); int ec_GFp_simple_cmp(const EC_GROUP *, const EC_POINT *a, const EC_POINT *b, BN_CTX *); int ec_GFp_simple_make_affine(const EC_GROUP *, EC_POINT *, BN_CTX *); int ec_GFp_simple_points_make_affine(const EC_GROUP *, size_t num, EC_POINT * [], BN_CTX *); int ec_GFp_simple_field_mul(const EC_GROUP *, BIGNUM *r, const BIGNUM *a, const BIGNUM *b, BN_CTX *); int ec_GFp_simple_field_sqr(const EC_GROUP *, BIGNUM *r, const BIGNUM *a, BN_CTX *); // method functions in montgomery.c int ec_GFp_mont_group_init(EC_GROUP *); int ec_GFp_mont_group_set_curve(EC_GROUP *, const BIGNUM *p, const BIGNUM *a, const BIGNUM *b, BN_CTX *); void ec_GFp_mont_group_finish(EC_GROUP *); int ec_GFp_mont_field_mul(const EC_GROUP *, BIGNUM *r, const BIGNUM *a, const BIGNUM *b, BN_CTX *); int ec_GFp_mont_field_sqr(const EC_GROUP *, BIGNUM *r, const BIGNUM *a, BN_CTX *); int ec_GFp_mont_field_encode(const EC_GROUP *, BIGNUM *r, const BIGNUM *a, BN_CTX *); int ec_GFp_mont_field_decode(const EC_GROUP *, BIGNUM *r, const BIGNUM *a, BN_CTX *); int ec_point_set_Jprojective_coordinates_GFp(const EC_GROUP *group, EC_POINT *point, const BIGNUM *x, const BIGNUM *y, const BIGNUM *z, BN_CTX *ctx); void ec_GFp_nistp_recode_scalar_bits(uint8_t *sign, uint8_t *digit, uint8_t in); const EC_METHOD *EC_GFp_nistp224_method(void); const EC_METHOD *EC_GFp_nistp256_method(void); // EC_GFp_nistz256_method is a GFp method using montgomery multiplication, with // x86-64 optimized P256. See http://eprint.iacr.org/2013/816. const EC_METHOD *EC_GFp_nistz256_method(void); struct ec_key_st { EC_GROUP *group; EC_POINT *pub_key; BIGNUM *priv_key; // fixed_k may contain a specific value of 'k', to be used in ECDSA signing. // This is only for the FIPS power-on tests. BIGNUM *fixed_k; unsigned int enc_flag; point_conversion_form_t conv_form; CRYPTO_refcount_t references; ECDSA_METHOD *ecdsa_meth; CRYPTO_EX_DATA ex_data; } /* EC_KEY */; struct built_in_curve { int nid; const uint8_t *oid; uint8_t oid_len; // comment is a human-readable string describing the curve. const char *comment; // param_len is the number of bytes needed to store a field element. uint8_t param_len; // params points to an array of 6*|param_len| bytes which hold the field // elements of the following (in big-endian order): prime, a, b, generator x, // generator y, order. const uint8_t *params; const EC_METHOD *method; }; #define OPENSSL_NUM_BUILT_IN_CURVES 4 struct built_in_curves { struct built_in_curve curves[OPENSSL_NUM_BUILT_IN_CURVES]; }; // OPENSSL_built_in_curves returns a pointer to static information about // standard curves. The array is terminated with an entry where |nid| is // |NID_undef|. const struct built_in_curves *OPENSSL_built_in_curves(void); #if defined(__cplusplus) } // extern C #endif #endif // OPENSSL_HEADER_EC_INTERNAL_H