/* ==================================================================== * Copyright (c) 2008 The OpenSSL Project. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * * 3. All advertising materials mentioning features or use of this * software must display the following acknowledgment: * "This product includes software developed by the OpenSSL Project * for use in the OpenSSL Toolkit. (http://www.openssl.org/)" * * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to * endorse or promote products derived from this software without * prior written permission. For written permission, please contact * openssl-core@openssl.org. * * 5. Products derived from this software may not be called "OpenSSL" * nor may "OpenSSL" appear in their names without prior written * permission of the OpenSSL Project. * * 6. Redistributions of any form whatsoever must retain the following * acknowledgment: * "This product includes software developed by the OpenSSL Project * for use in the OpenSSL Toolkit (http://www.openssl.org/)" * * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED * OF THE POSSIBILITY OF SUCH DAMAGE. * ==================================================================== */ #ifndef OPENSSL_HEADER_MODES_INTERNAL_H #define OPENSSL_HEADER_MODES_INTERNAL_H #include #if defined(__cplusplus) extern "C" { #endif #define asm __asm__ #define STRICT_ALIGNMENT 1 #if defined(OPENSSL_X86_64) || defined(OPENSSL_X86) || defined(OPENSSL_AARCH64) #undef STRICT_ALIGNMENT #define STRICT_ALIGNMENT 0 #endif #if !defined(PEDANTIC) && !defined(OPENSSL_NO_ASM) #if defined(__GNUC__) && __GNUC__ >= 2 #if defined(OPENSSL_X86_64) #define BSWAP8(x) \ ({ \ uint64_t ret = (x); \ asm("bswapq %0" : "+r"(ret)); \ ret; \ }) #define BSWAP4(x) \ ({ \ uint32_t ret = (x); \ asm("bswapl %0" : "+r"(ret)); \ ret; \ }) #elif defined(OPENSSL_X86) #define BSWAP8(x) \ ({ \ uint32_t lo = (uint64_t)(x) >> 32, hi = (x); \ asm("bswapl %0; bswapl %1" : "+r"(hi), "+r"(lo)); \ (uint64_t) hi << 32 | lo; \ }) #define BSWAP4(x) \ ({ \ uint32_t ret = (x); \ asm("bswapl %0" : "+r"(ret)); \ ret; \ }) #elif defined(OPENSSL_AARCH64) #define BSWAP8(x) \ ({ \ uint64_t ret; \ asm("rev %0,%1" : "=r"(ret) : "r"(x)); \ ret; \ }) #define BSWAP4(x) \ ({ \ uint32_t ret; \ asm("rev %w0,%w1" : "=r"(ret) : "r"(x)); \ ret; \ }) #elif defined(OPENSSL_ARM) && !defined(STRICT_ALIGNMENT) #define BSWAP8(x) \ ({ \ uint32_t lo = (uint64_t)(x) >> 32, hi = (x); \ asm("rev %0,%0; rev %1,%1" : "+r"(hi), "+r"(lo)); \ (uint64_t) hi << 32 | lo; \ }) #define BSWAP4(x) \ ({ \ uint32_t ret; \ asm("rev %0,%1" : "=r"(ret) : "r"((uint32_t)(x))); \ ret; \ }) #endif #elif defined(_MSC_VER) #if _MSC_VER >= 1300 #pragma warning(push, 3) #include #pragma warning(pop) #pragma intrinsic(_byteswap_uint64, _byteswap_ulong) #define BSWAP8(x) _byteswap_uint64((uint64_t)(x)) #define BSWAP4(x) _byteswap_ulong((uint32_t)(x)) #elif defined(OPENSSL_X86) __inline uint32_t _bswap4(uint32_t val) { _asm mov eax, val _asm bswap eax } #define BSWAP4(x) _bswap4(x) #endif #endif #endif #if defined(BSWAP4) && !defined(STRICT_ALIGNMENT) #define GETU32(p) BSWAP4(*(const uint32_t *)(p)) #define PUTU32(p, v) *(uint32_t *)(p) = BSWAP4(v) #else #define GETU32(p) \ ((uint32_t)(p)[0] << 24 | (uint32_t)(p)[1] << 16 | (uint32_t)(p)[2] << 8 | (uint32_t)(p)[3]) #define PUTU32(p, v) \ ((p)[0] = (uint8_t)((v) >> 24), (p)[1] = (uint8_t)((v) >> 16), \ (p)[2] = (uint8_t)((v) >> 8), (p)[3] = (uint8_t)(v)) #endif /* block128_f is the type of a 128-bit, block cipher. */ typedef void (*block128_f)(const uint8_t in[16], uint8_t out[16], const void *key); /* GCM definitions */ typedef struct { uint64_t hi,lo; } u128; /* This differs from upstream's |gcm128_context| in that it does not have the * |key| pointer, in order to make it |memcpy|-friendly. Rather the key is * passed into each call that needs it. */ struct gcm128_context { /* Following 6 names follow names in GCM specification */ union { uint64_t u[2]; uint32_t d[4]; uint8_t c[16]; size_t t[16 / sizeof(size_t)]; } Yi, EKi, EK0, len, Xi, H; /* Relative position of Xi, H and pre-computed Htable is used in some * assembler modules, i.e. don't change the order! */ u128 Htable[16]; void (*gmult)(uint64_t Xi[2], const u128 Htable[16]); void (*ghash)(uint64_t Xi[2], const u128 Htable[16], const uint8_t *inp, size_t len); unsigned int mres, ares; block128_f block; }; #if defined(OPENSSL_X86) || defined(OPENSSL_X86_64) /* crypto_gcm_clmul_enabled returns one if the CLMUL implementation of GCM is * used. */ int crypto_gcm_clmul_enabled(void); #endif /* CTR. */ /* ctr128_f is the type of a function that performs CTR-mode encryption. */ typedef void (*ctr128_f)(const uint8_t *in, uint8_t *out, size_t blocks, const void *key, const uint8_t ivec[16]); /* CRYPTO_ctr128_encrypt encrypts (or decrypts, it's the same in CTR mode) * |len| bytes from |in| to |out| using |block| in counter mode. There's no * requirement that |len| be a multiple of any value and any partial blocks are * stored in |ecount_buf| and |*num|, which must be zeroed before the initial * call. The counter is a 128-bit, big-endian value in |ivec| and is * incremented by this function. */ void CRYPTO_ctr128_encrypt(const uint8_t *in, uint8_t *out, size_t len, const void *key, uint8_t ivec[16], uint8_t ecount_buf[16], unsigned *num, block128_f block); /* CRYPTO_ctr128_encrypt_ctr32 acts like |CRYPTO_ctr128_encrypt| but takes * |ctr|, a function that performs CTR mode but only deals with the lower 32 * bits of the counter. This is useful when |ctr| can be an optimised * function. */ void CRYPTO_ctr128_encrypt_ctr32(const uint8_t *in, uint8_t *out, size_t len, const void *key, uint8_t ivec[16], uint8_t ecount_buf[16], unsigned *num, ctr128_f ctr); /* GCM. * * This API differs from the upstream API slightly. The |GCM128_CONTEXT| does * not have a |key| pointer that points to the key as upstream's version does. * Instead, every function takes a |key| parameter. This way |GCM128_CONTEXT| * can be safely copied. */ typedef struct gcm128_context GCM128_CONTEXT; /* CRYPTO_gcm128_init initialises |ctx| to use |block| (typically AES) with * the given key. */ OPENSSL_EXPORT void CRYPTO_gcm128_init(GCM128_CONTEXT *ctx, const void *key, block128_f block); /* CRYPTO_gcm128_setiv sets the IV (nonce) for |ctx|. The |key| must be the * same key that was passed to |CRYPTO_gcm128_init|. */ OPENSSL_EXPORT void CRYPTO_gcm128_setiv(GCM128_CONTEXT *ctx, const void *key, const uint8_t *iv, size_t iv_len); /* CRYPTO_gcm128_aad sets the authenticated data for an instance of GCM. * This must be called before and data is encrypted. It returns one on success * and zero otherwise. */ OPENSSL_EXPORT int CRYPTO_gcm128_aad(GCM128_CONTEXT *ctx, const uint8_t *aad, size_t len); /* CRYPTO_gcm128_encrypt encrypts |len| bytes from |in| to |out|. The |key| * must be the same key that was passed to |CRYPTO_gcm128_init|. It returns one * on success and zero otherwise. */ OPENSSL_EXPORT int CRYPTO_gcm128_encrypt(GCM128_CONTEXT *ctx, const void *key, const uint8_t *in, uint8_t *out, size_t len); /* CRYPTO_gcm128_decrypt decrypts |len| bytes from |in| to |out|. The |key| * must be the same key that was passed to |CRYPTO_gcm128_init|. It returns one * on success and zero otherwise. */ OPENSSL_EXPORT int CRYPTO_gcm128_decrypt(GCM128_CONTEXT *ctx, const void *key, const uint8_t *in, uint8_t *out, size_t len); /* CRYPTO_gcm128_encrypt_ctr32 encrypts |len| bytes from |in| to |out| using * a CTR function that only handles the bottom 32 bits of the nonce, like * |CRYPTO_ctr128_encrypt_ctr32|. The |key| must be the same key that was * passed to |CRYPTO_gcm128_init|. It returns one on success and zero * otherwise. */ OPENSSL_EXPORT int CRYPTO_gcm128_encrypt_ctr32(GCM128_CONTEXT *ctx, const void *key, const uint8_t *in, uint8_t *out, size_t len, ctr128_f stream); /* CRYPTO_gcm128_decrypt_ctr32 decrypts |len| bytes from |in| to |out| using * a CTR function that only handles the bottom 32 bits of the nonce, like * |CRYPTO_ctr128_encrypt_ctr32|. The |key| must be the same key that was * passed to |CRYPTO_gcm128_init|. It returns one on success and zero * otherwise. */ OPENSSL_EXPORT int CRYPTO_gcm128_decrypt_ctr32(GCM128_CONTEXT *ctx, const void *key, const uint8_t *in, uint8_t *out, size_t len, ctr128_f stream); /* CRYPTO_gcm128_finish calculates the authenticator and compares it against * |len| bytes of |tag|. It returns one on success and zero otherwise. */ OPENSSL_EXPORT int CRYPTO_gcm128_finish(GCM128_CONTEXT *ctx, const uint8_t *tag, size_t len); /* CRYPTO_gcm128_tag calculates the authenticator and copies it into |tag|. * The minimum of |len| and 16 bytes are copied into |tag|. */ OPENSSL_EXPORT void CRYPTO_gcm128_tag(GCM128_CONTEXT *ctx, uint8_t *tag, size_t len); /* CBC. */ /* cbc128_f is the type of a function that performs CBC-mode encryption. */ typedef void (*cbc128_f)(const uint8_t *in, uint8_t *out, size_t len, const void *key, uint8_t ivec[16], int enc); /* CRYPTO_cbc128_encrypt encrypts |len| bytes from |in| to |out| using the * given IV and block cipher in CBC mode. The input need not be a multiple of * 128 bits long, but the output will round up to the nearest 128 bit multiple, * zero padding the input if needed. The IV will be updated on return. */ void CRYPTO_cbc128_encrypt(const uint8_t *in, uint8_t *out, size_t len, const void *key, uint8_t ivec[16], block128_f block); /* CRYPTO_cbc128_decrypt decrypts |len| bytes from |in| to |out| using the * given IV and block cipher in CBC mode. If |len| is not a multiple of 128 * bits then only that many bytes will be written, but a multiple of 128 bits * is always read from |in|. The IV will be updated on return. */ void CRYPTO_cbc128_decrypt(const uint8_t *in, uint8_t *out, size_t len, const void *key, uint8_t ivec[16], block128_f block); /* OFB. */ /* CRYPTO_ofb128_encrypt encrypts (or decrypts, it's the same with OFB mode) * |len| bytes from |in| to |out| using |block| in OFB mode. There's no * requirement that |len| be a multiple of any value and any partial blocks are * stored in |ivec| and |*num|, the latter must be zero before the initial * call. */ void CRYPTO_ofb128_encrypt(const uint8_t *in, uint8_t *out, size_t len, const void *key, uint8_t ivec[16], unsigned *num, block128_f block); /* CFB. */ /* CRYPTO_cfb128_encrypt encrypts (or decrypts, if |enc| is zero) |len| bytes * from |in| to |out| using |block| in CFB mode. There's no requirement that * |len| be a multiple of any value and any partial blocks are stored in |ivec| * and |*num|, the latter must be zero before the initial call. */ void CRYPTO_cfb128_encrypt(const uint8_t *in, uint8_t *out, size_t len, const void *key, uint8_t ivec[16], unsigned *num, int enc, block128_f block); /* CRYPTO_cfb128_8_encrypt encrypts (or decrypts, if |enc| is zero) |len| bytes * from |in| to |out| using |block| in CFB-8 mode. Prior to the first call * |num| should be set to zero. */ void CRYPTO_cfb128_8_encrypt(const uint8_t *in, uint8_t *out, size_t len, const void *key, uint8_t ivec[16], unsigned *num, int enc, block128_f block); /* CRYPTO_cfb128_1_encrypt encrypts (or decrypts, if |enc| is zero) |len| bytes * from |in| to |out| using |block| in CFB-1 mode. Prior to the first call * |num| should be set to zero. */ void CRYPTO_cfb128_1_encrypt(const uint8_t *in, uint8_t *out, size_t bits, const void *key, uint8_t ivec[16], unsigned *num, int enc, block128_f block); size_t CRYPTO_cts128_encrypt_block(const uint8_t *in, uint8_t *out, size_t len, const void *key, uint8_t ivec[16], block128_f block); #if !defined(OPENSSL_NO_ASM) && \ (defined(OPENSSL_X86) || defined(OPENSSL_X86_64)) void aesni_ctr32_encrypt_blocks(const uint8_t *in, uint8_t *out, size_t blocks, const void *key, const uint8_t *ivec); #endif #if defined(__cplusplus) } /* extern C */ #endif #endif /* OPENSSL_HEADER_MODES_INTERNAL_H */