/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) * All rights reserved. * * This package is an SSL implementation written * by Eric Young (eay@cryptsoft.com). * The implementation was written so as to conform with Netscapes SSL. * * This library is free for commercial and non-commercial use as long as * the following conditions are aheared to. The following conditions * apply to all code found in this distribution, be it the RC4, RSA, * lhash, DES, etc., code; not just the SSL code. The SSL documentation * included with this distribution is covered by the same copyright terms * except that the holder is Tim Hudson (tjh@cryptsoft.com). * * Copyright remains Eric Young's, and as such any Copyright notices in * the code are not to be removed. * If this package is used in a product, Eric Young should be given attribution * as the author of the parts of the library used. * This can be in the form of a textual message at program startup or * in documentation (online or textual) provided with the package. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * "This product includes cryptographic software written by * Eric Young (eay@cryptsoft.com)" * The word 'cryptographic' can be left out if the rouines from the library * being used are not cryptographic related :-). * 4. If you include any Windows specific code (or a derivative thereof) from * the apps directory (application code) you must include an acknowledgement: * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" * * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * The licence and distribution terms for any publically available version or * derivative of this code cannot be changed. i.e. this code cannot simply be * copied and put under another distribution licence * [including the GNU Public Licence.] */ /* ==================================================================== * Copyright (c) 1998-2007 The OpenSSL Project. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * * 3. All advertising materials mentioning features or use of this * software must display the following acknowledgment: * "This product includes software developed by the OpenSSL Project * for use in the OpenSSL Toolkit. (http://www.openssl.org/)" * * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to * endorse or promote products derived from this software without * prior written permission. For written permission, please contact * openssl-core@openssl.org. * * 5. Products derived from this software may not be called "OpenSSL" * nor may "OpenSSL" appear in their names without prior written * permission of the OpenSSL Project. * * 6. Redistributions of any form whatsoever must retain the following * acknowledgment: * "This product includes software developed by the OpenSSL Project * for use in the OpenSSL Toolkit (http://www.openssl.org/)" * * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED * OF THE POSSIBILITY OF SUCH DAMAGE. * ==================================================================== * * This product includes cryptographic software written by Eric Young * (eay@cryptsoft.com). This product includes software written by Tim * Hudson (tjh@cryptsoft.com). * */ /* ==================================================================== * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED. * ECC cipher suite support in OpenSSL originally developed by * SUN MICROSYSTEMS, INC., and contributed to the OpenSSL project. */ /* ==================================================================== * Copyright 2005 Nokia. All rights reserved. * * The portions of the attached software ("Contribution") is developed by * Nokia Corporation and is licensed pursuant to the OpenSSL open source * license. * * The Contribution, originally written by Mika Kousa and Pasi Eronen of * Nokia Corporation, consists of the "PSK" (Pre-Shared Key) ciphersuites * support (see RFC 4279) to OpenSSL. * * No patent licenses or other rights except those expressly stated in * the OpenSSL open source license shall be deemed granted or received * expressly, by implication, estoppel, or otherwise. * * No assurances are provided by Nokia that the Contribution does not * infringe the patent or other intellectual property rights of any third * party or that the license provides you with all the necessary rights * to make use of the Contribution. * * THE SOFTWARE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. IN * ADDITION TO THE DISCLAIMERS INCLUDED IN THE LICENSE, NOKIA * SPECIFICALLY DISCLAIMS ANY LIABILITY FOR CLAIMS BROUGHT BY YOU OR ANY * OTHER ENTITY BASED ON INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS OR * OTHERWISE. */ #ifndef OPENSSL_HEADER_SSL_INTERNAL_H #define OPENSSL_HEADER_SSL_INTERNAL_H #include #include #include #include #include #include #include #include #include #include #include #include #include "../crypto/internal.h" #if defined(OPENSSL_WINDOWS) // Windows defines struct timeval in winsock2.h. OPENSSL_MSVC_PRAGMA(warning(push, 3)) #include OPENSSL_MSVC_PRAGMA(warning(pop)) #else #include #endif typedef struct cert_st CERT; namespace bssl { struct SSL_HANDSHAKE; // C++ utilities. // New behaves like |new| but uses |OPENSSL_malloc| for memory allocation. It // returns nullptr on allocation error. It only implements single-object // allocation and not new T[n]. // // Note: unlike |new|, this does not support non-public constructors. template T *New(Args &&... args) { void *t = OPENSSL_malloc(sizeof(T)); if (t == nullptr) { OPENSSL_PUT_ERROR(SSL, ERR_R_MALLOC_FAILURE); return nullptr; } return new (t) T(std::forward(args)...); } // Delete behaves like |delete| but uses |OPENSSL_free| to release memory. // // Note: unlike |delete| this does not support non-public destructors. template void Delete(T *t) { if (t != nullptr) { t->~T(); OPENSSL_free(t); } } // All types with kAllowUniquePtr set may be used with UniquePtr. Other types // may be C structs which require a |BORINGSSL_MAKE_DELETER| registration. namespace internal { template struct DeleterImpl::type> { static void Free(T *t) { Delete(t); } }; } // MakeUnique behaves like |std::make_unique| but returns nullptr on allocation // error. template UniquePtr MakeUnique(Args &&... args) { return UniquePtr(New(std::forward(args)...)); } #if defined(BORINGSSL_ALLOW_CXX_RUNTIME) #define HAS_VIRTUAL_DESTRUCTOR #define PURE_VIRTUAL = 0 #else // HAS_VIRTUAL_DESTRUCTOR should be declared in any base class which defines a // virtual destructor. This avoids a dependency on |_ZdlPv| and prevents the // class from being used with |delete|. #define HAS_VIRTUAL_DESTRUCTOR \ void operator delete(void *) { abort(); } // PURE_VIRTUAL should be used instead of = 0 when defining pure-virtual // functions. This avoids a dependency on |__cxa_pure_virtual| but loses // compile-time checking. #define PURE_VIRTUAL { abort(); } #endif // Array is an owning array of elements of |T|. template class Array { public: // Array's default constructor creates an empty array. Array() {} Array(const Array &) = delete; Array(Array &&other) { *this = std::move(other); } ~Array() { Reset(); } Array &operator=(const Array &) = delete; Array &operator=(Array &&other) { Reset(); other.Release(&data_, &size_); return *this; } const T *data() const { return data_; } T *data() { return data_; } size_t size() const { return size_; } bool empty() const { return size_ == 0; } const T &operator[](size_t i) const { return data_[i]; } T &operator[](size_t i) { return data_[i]; } T *begin() { return data_; } const T *cbegin() const { return data_; } T *end() { return data_ + size_; } const T *cend() const { return data_ + size_; } void Reset() { Reset(nullptr, 0); } // Reset releases the current contents of the array and takes ownership of the // raw pointer supplied by the caller. void Reset(T *new_data, size_t new_size) { for (size_t i = 0; i < size_; i++) { data_[i].~T(); } OPENSSL_free(data_); data_ = new_data; size_ = new_size; } // Release releases ownership of the array to a raw pointer supplied by the // caller. void Release(T **out, size_t *out_size) { *out = data_; *out_size = size_; data_ = nullptr; size_ = 0; } // Init replaces the array with a newly-allocated array of |new_size| // default-constructed copies of |T|. It returns true on success and false on // error. // // Note that if |T| is a primitive type like |uint8_t|, it is uninitialized. bool Init(size_t new_size) { Reset(); if (new_size == 0) { return true; } if (new_size > std::numeric_limits::max() / sizeof(T)) { OPENSSL_PUT_ERROR(SSL, ERR_R_OVERFLOW); return false; } data_ = reinterpret_cast(OPENSSL_malloc(new_size * sizeof(T))); if (data_ == nullptr) { OPENSSL_PUT_ERROR(SSL, ERR_R_MALLOC_FAILURE); return false; } size_ = new_size; for (size_t i = 0; i < size_; i++) { new (&data_[i]) T; } return true; } // CopyFrom replaces the array with a newly-allocated copy of |in|. It returns // true on success and false on error. bool CopyFrom(Span in) { if (!Init(in.size())) { return false; } OPENSSL_memcpy(data_, in.data(), in.size()); return true; } private: T *data_ = nullptr; size_t size_ = 0; }; // CBBFinishArray behaves like |CBB_finish| but stores the result in an Array. bool CBBFinishArray(CBB *cbb, Array *out); // Protocol versions. // // Due to DTLS's historical wire version differences and to support multiple // variants of the same protocol during development, we maintain two notions of // version. // // The "version" or "wire version" is the actual 16-bit value that appears on // the wire. It uniquely identifies a version and is also used at API // boundaries. The set of supported versions differs between TLS and DTLS. Wire // versions are opaque values and may not be compared numerically. // // The "protocol version" identifies the high-level handshake variant being // used. DTLS versions map to the corresponding TLS versions. Draft TLS 1.3 // variants all map to TLS 1.3. Protocol versions are sequential and may be // compared numerically. // ssl_protocol_version_from_wire sets |*out| to the protocol version // corresponding to wire version |version| and returns true. If |version| is not // a valid TLS or DTLS version, it returns false. // // Note this simultaneously handles both DTLS and TLS. Use one of the // higher-level functions below for most operations. bool ssl_protocol_version_from_wire(uint16_t *out, uint16_t version); // ssl_get_version_range sets |*out_min_version| and |*out_max_version| to the // minimum and maximum enabled protocol versions, respectively. bool ssl_get_version_range(const SSL *ssl, uint16_t *out_min_version, uint16_t *out_max_version); // ssl_supports_version returns whether |hs| supports |version|. bool ssl_supports_version(SSL_HANDSHAKE *hs, uint16_t version); // ssl_add_supported_versions writes the supported versions of |hs| to |cbb|, in // decreasing preference order. bool ssl_add_supported_versions(SSL_HANDSHAKE *hs, CBB *cbb); // ssl_negotiate_version negotiates a common version based on |hs|'s preferences // and the peer preference list in |peer_versions|. On success, it returns true // and sets |*out_version| to the selected version. Otherwise, it returns false // and sets |*out_alert| to an alert to send. bool ssl_negotiate_version(SSL_HANDSHAKE *hs, uint8_t *out_alert, uint16_t *out_version, const CBS *peer_versions); // ssl3_protocol_version returns |ssl|'s protocol version. It is an error to // call this function before the version is determined. uint16_t ssl3_protocol_version(const SSL *ssl); // ssl_is_resumption_experiment returns whether the version corresponds to a // TLS 1.3 resumption experiment. bool ssl_is_resumption_experiment(uint16_t version); // ssl_is_resumption_variant returns whether the version corresponds to a // TLS 1.3 resumption experiment. bool ssl_is_resumption_variant(enum tls13_variant_t variant); // ssl_is_resumption_client_ccs_experiment returns whether the version // corresponds to a TLS 1.3 resumption experiment that sends a client CCS. bool ssl_is_resumption_client_ccs_experiment(uint16_t version); // ssl_is_resumption_record_version_experiment returns whether the version // corresponds to a TLS 1.3 resumption experiment that modifies the record // version. bool ssl_is_resumption_record_version_experiment(uint16_t version); // Cipher suites. } // namespace bssl struct ssl_cipher_st { // name is the OpenSSL name for the cipher. const char *name; // standard_name is the IETF name for the cipher. const char *standard_name; // id is the cipher suite value bitwise OR-d with 0x03000000. uint32_t id; // algorithm_* determine the cipher suite. See constants below for the values. uint32_t algorithm_mkey; uint32_t algorithm_auth; uint32_t algorithm_enc; uint32_t algorithm_mac; uint32_t algorithm_prf; }; namespace bssl { // Bits for |algorithm_mkey| (key exchange algorithm). #define SSL_kRSA 0x00000001u #define SSL_kECDHE 0x00000002u // SSL_kPSK is only set for plain PSK, not ECDHE_PSK. #define SSL_kPSK 0x00000004u #define SSL_kGENERIC 0x00000008u // Bits for |algorithm_auth| (server authentication). #define SSL_aRSA 0x00000001u #define SSL_aECDSA 0x00000002u // SSL_aPSK is set for both PSK and ECDHE_PSK. #define SSL_aPSK 0x00000004u #define SSL_aGENERIC 0x00000008u #define SSL_aCERT (SSL_aRSA | SSL_aECDSA) // Bits for |algorithm_enc| (symmetric encryption). #define SSL_3DES 0x00000001u #define SSL_AES128 0x00000002u #define SSL_AES256 0x00000004u #define SSL_AES128GCM 0x00000008u #define SSL_AES256GCM 0x00000010u #define SSL_eNULL 0x00000020u #define SSL_CHACHA20POLY1305 0x00000040u #define SSL_AES (SSL_AES128 | SSL_AES256 | SSL_AES128GCM | SSL_AES256GCM) // Bits for |algorithm_mac| (symmetric authentication). #define SSL_SHA1 0x00000001u #define SSL_SHA256 0x00000002u #define SSL_SHA384 0x00000004u // SSL_AEAD is set for all AEADs. #define SSL_AEAD 0x00000008u // Bits for |algorithm_prf| (handshake digest). #define SSL_HANDSHAKE_MAC_DEFAULT 0x1 #define SSL_HANDSHAKE_MAC_SHA256 0x2 #define SSL_HANDSHAKE_MAC_SHA384 0x4 // SSL_MAX_DIGEST is the number of digest types which exist. When adding a new // one, update the table in ssl_cipher.c. #define SSL_MAX_DIGEST 4 // ssl_cipher_get_evp_aead sets |*out_aead| to point to the correct EVP_AEAD // object for |cipher| protocol version |version|. It sets |*out_mac_secret_len| // and |*out_fixed_iv_len| to the MAC key length and fixed IV length, // respectively. The MAC key length is zero except for legacy block and stream // ciphers. It returns true on success and false on error. bool ssl_cipher_get_evp_aead(const EVP_AEAD **out_aead, size_t *out_mac_secret_len, size_t *out_fixed_iv_len, const SSL_CIPHER *cipher, uint16_t version, int is_dtls); // ssl_get_handshake_digest returns the |EVP_MD| corresponding to |version| and // |cipher|. const EVP_MD *ssl_get_handshake_digest(uint16_t version, const SSL_CIPHER *cipher); // ssl_create_cipher_list evaluates |rule_str| according to the ciphers in // |ssl_method|. It sets |*out_cipher_list| to a newly-allocated // |ssl_cipher_preference_list_st| containing the result. It returns true on // success and false on failure. If |strict| is true, nonsense will be // rejected. If false, nonsense will be silently ignored. An empty result is // considered an error regardless of |strict|. bool ssl_create_cipher_list( const SSL_PROTOCOL_METHOD *ssl_method, struct ssl_cipher_preference_list_st **out_cipher_list, const char *rule_str, bool strict); // ssl_cipher_get_value returns the cipher suite id of |cipher|. uint16_t ssl_cipher_get_value(const SSL_CIPHER *cipher); // ssl_cipher_auth_mask_for_key returns the mask of cipher |algorithm_auth| // values suitable for use with |key| in TLS 1.2 and below. uint32_t ssl_cipher_auth_mask_for_key(const EVP_PKEY *key); // ssl_cipher_uses_certificate_auth returns whether |cipher| authenticates the // server and, optionally, the client with a certificate. bool ssl_cipher_uses_certificate_auth(const SSL_CIPHER *cipher); // ssl_cipher_requires_server_key_exchange returns whether |cipher| requires a // ServerKeyExchange message. // // This function may return false while still allowing |cipher| an optional // ServerKeyExchange. This is the case for plain PSK ciphers. bool ssl_cipher_requires_server_key_exchange(const SSL_CIPHER *cipher); // ssl_cipher_get_record_split_len, for TLS 1.0 CBC mode ciphers, returns the // length of an encrypted 1-byte record, for use in record-splitting. Otherwise // it returns zero. size_t ssl_cipher_get_record_split_len(const SSL_CIPHER *cipher); // Transcript layer. // SSLTranscript maintains the handshake transcript as a combination of a // buffer and running hash. class SSLTranscript { public: SSLTranscript(); ~SSLTranscript(); // Init initializes the handshake transcript. If called on an existing // transcript, it resets the transcript and hash. It returns true on success // and false on failure. bool Init(); // InitHash initializes the handshake hash based on the PRF and contents of // the handshake transcript. Subsequent calls to |Update| will update the // rolling hash. It returns one on success and zero on failure. It is an error // to call this function after the handshake buffer is released. bool InitHash(uint16_t version, const SSL_CIPHER *cipher); const uint8_t *buffer_data() const { return reinterpret_cast(buffer_->data); } size_t buffer_len() const { return buffer_->length; } // FreeBuffer releases the handshake buffer. Subsequent calls to // |Update| will not update the handshake buffer. void FreeBuffer(); // DigestLen returns the length of the PRF hash. size_t DigestLen() const; // Digest returns the PRF hash. For TLS 1.1 and below, this is // |EVP_md5_sha1|. const EVP_MD *Digest() const; // Update adds |in| to the handshake buffer and handshake hash, whichever is // enabled. It returns true on success and false on failure. bool Update(const uint8_t *in, size_t in_len); // GetHash writes the handshake hash to |out| which must have room for at // least |DigestLen| bytes. On success, it returns true and sets |*out_len| to // the number of bytes written. Otherwise, it returns false. bool GetHash(uint8_t *out, size_t *out_len); // GetSSL3CertVerifyHash writes the SSL 3.0 CertificateVerify hash into the // bytes pointed to by |out| and writes the number of bytes to // |*out_len|. |out| must have room for |EVP_MAX_MD_SIZE| bytes. It returns // one on success and zero on failure. bool GetSSL3CertVerifyHash(uint8_t *out, size_t *out_len, const SSL_SESSION *session, uint16_t signature_algorithm); // GetFinishedMAC computes the MAC for the Finished message into the bytes // pointed by |out| and writes the number of bytes to |*out_len|. |out| must // have room for |EVP_MAX_MD_SIZE| bytes. It returns true on success and false // on failure. bool GetFinishedMAC(uint8_t *out, size_t *out_len, const SSL_SESSION *session, bool from_server); private: // buffer_, if non-null, contains the handshake transcript. UniquePtr buffer_; // hash, if initialized with an |EVP_MD|, maintains the handshake hash. For // TLS 1.1 and below, it is the SHA-1 half. ScopedEVP_MD_CTX hash_; // md5, if initialized with an |EVP_MD|, maintains the MD5 half of the // handshake hash for TLS 1.1 and below. ScopedEVP_MD_CTX md5_; }; // tls1_prf computes the PRF function for |ssl|. It writes |out_len| bytes to // |out|, using |secret| as the secret and |label| as the label. |seed1| and // |seed2| are concatenated to form the seed parameter. It returns one on // success and zero on failure. int tls1_prf(const EVP_MD *digest, uint8_t *out, size_t out_len, const uint8_t *secret, size_t secret_len, const char *label, size_t label_len, const uint8_t *seed1, size_t seed1_len, const uint8_t *seed2, size_t seed2_len); // Encryption layer. // SSLAEADContext contains information about an AEAD that is being used to // encrypt an SSL connection. class SSLAEADContext { public: SSLAEADContext(uint16_t version, bool is_dtls, const SSL_CIPHER *cipher); ~SSLAEADContext(); static constexpr bool kAllowUniquePtr = true; SSLAEADContext(const SSLAEADContext &&) = delete; SSLAEADContext &operator=(const SSLAEADContext &&) = delete; // CreateNullCipher creates an |SSLAEADContext| for the null cipher. static UniquePtr CreateNullCipher(bool is_dtls); // Create creates an |SSLAEADContext| using the supplied key material. It // returns nullptr on error. Only one of |Open| or |Seal| may be used with the // resulting object, depending on |direction|. |version| is the normalized // protocol version, so DTLS 1.0 is represented as 0x0301, not 0xffef. static UniquePtr Create(enum evp_aead_direction_t direction, uint16_t version, int is_dtls, const SSL_CIPHER *cipher, Span enc_key, Span mac_key, Span fixed_iv); // SetVersionIfNullCipher sets the version the SSLAEADContext for the null // cipher, to make version-specific determinations in the record layer prior // to a cipher being selected. void SetVersionIfNullCipher(uint16_t version); // ProtocolVersion returns the protocol version associated with this // SSLAEADContext. It can only be called once |version_| has been set to a // valid value. uint16_t ProtocolVersion() const; // RecordVersion returns the record version that should be used with this // SSLAEADContext for record construction and crypto. uint16_t RecordVersion() const; const SSL_CIPHER *cipher() const { return cipher_; } // is_null_cipher returns true if this is the null cipher. bool is_null_cipher() const { return !cipher_; } // ExplicitNonceLen returns the length of the explicit nonce. size_t ExplicitNonceLen() const; // MaxOverhead returns the maximum overhead of calling |Seal|. size_t MaxOverhead() const; // SuffixLen calculates the suffix length written by |SealScatter| and writes // it to |*out_suffix_len|. It returns true on success and false on error. // |in_len| and |extra_in_len| should equal the argument of the same names // passed to |SealScatter|. bool SuffixLen(size_t *out_suffix_len, size_t in_len, size_t extra_in_len) const; // Open authenticates and decrypts |in_len| bytes from |in| in-place. On // success, it sets |*out| to the plaintext in |in| and returns true. // Otherwise, it returns false. The output will always be |ExplicitNonceLen| // bytes ahead of |in|. bool Open(CBS *out, uint8_t type, uint16_t record_version, const uint8_t seqnum[8], uint8_t *in, size_t in_len); // Seal encrypts and authenticates |in_len| bytes from |in| and writes the // result to |out|. It returns true on success and false on error. // // If |in| and |out| alias then |out| + |ExplicitNonceLen| must be == |in|. bool Seal(uint8_t *out, size_t *out_len, size_t max_out, uint8_t type, uint16_t record_version, const uint8_t seqnum[8], const uint8_t *in, size_t in_len); // SealScatter encrypts and authenticates |in_len| bytes from |in| and splits // the result between |out_prefix|, |out| and |out_suffix|. It returns one on // success and zero on error. // // On successful return, exactly |ExplicitNonceLen| bytes are written to // |out_prefix|, |in_len| bytes to |out|, and |SuffixLen| bytes to // |out_suffix|. // // |extra_in| may point to an additional plaintext buffer. If present, // |extra_in_len| additional bytes are encrypted and authenticated, and the // ciphertext is written to the beginning of |out_suffix|. |SuffixLen| should // be used to size |out_suffix| accordingly. // // If |in| and |out| alias then |out| must be == |in|. Other arguments may not // alias anything. bool SealScatter(uint8_t *out_prefix, uint8_t *out, uint8_t *out_suffix, uint8_t type, uint16_t record_version, const uint8_t seqnum[8], const uint8_t *in, size_t in_len, const uint8_t *extra_in, size_t extra_in_len); bool GetIV(const uint8_t **out_iv, size_t *out_iv_len) const; private: // GetAdditionalData writes the additional data into |out| and returns the // number of bytes written. size_t GetAdditionalData(uint8_t out[13], uint8_t type, uint16_t record_version, const uint8_t seqnum[8], size_t plaintext_len); const SSL_CIPHER *cipher_; ScopedEVP_AEAD_CTX ctx_; // fixed_nonce_ contains any bytes of the nonce that are fixed for all // records. uint8_t fixed_nonce_[12]; uint8_t fixed_nonce_len_ = 0, variable_nonce_len_ = 0; // version_ is the wire version that should be used with this AEAD. uint16_t version_; // is_dtls_ is whether DTLS is being used with this AEAD. bool is_dtls_; // variable_nonce_included_in_record_ is true if the variable nonce // for a record is included as a prefix before the ciphertext. bool variable_nonce_included_in_record_ : 1; // random_variable_nonce_ is true if the variable nonce is // randomly generated, rather than derived from the sequence // number. bool random_variable_nonce_ : 1; // omit_length_in_ad_ is true if the length should be omitted in the // AEAD's ad parameter. bool omit_length_in_ad_ : 1; // omit_version_in_ad_ is true if the version should be omitted // in the AEAD's ad parameter. bool omit_version_in_ad_ : 1; // omit_ad_ is true if the AEAD's ad parameter should be omitted. bool omit_ad_ : 1; // xor_fixed_nonce_ is true if the fixed nonce should be XOR'd into the // variable nonce rather than prepended. bool xor_fixed_nonce_ : 1; }; // DTLS replay bitmap. // DTLS1_BITMAP maintains a sliding window of 64 sequence numbers to detect // replayed packets. It should be initialized by zeroing every field. struct DTLS1_BITMAP { // map is a bit mask of the last 64 sequence numbers. Bit // |1< Create(uint16_t group_id); // GroupID returns the group ID. virtual uint16_t GroupID() const PURE_VIRTUAL; // Offer generates a keypair and writes the public value to // |out_public_key|. It returns true on success and false on error. virtual bool Offer(CBB *out_public_key) PURE_VIRTUAL; // Accept performs a key exchange against the |peer_key| generated by |offer|. // On success, it returns true, writes the public value to |out_public_key|, // and sets |*out_secret| the shared secret. On failure, it returns false and // sets |*out_alert| to an alert to send to the peer. // // The default implementation calls |Offer| and then |Finish|, assuming a key // exchange protocol where the peers are symmetric. virtual bool Accept(CBB *out_public_key, Array *out_secret, uint8_t *out_alert, Span peer_key); // Finish performs a key exchange against the |peer_key| generated by // |Accept|. On success, it returns true and sets |*out_secret| to the shared // secret. On failure, it returns zero and sets |*out_alert| to an alert to // send to the peer. virtual bool Finish(Array *out_secret, uint8_t *out_alert, Span peer_key) PURE_VIRTUAL; }; // ssl_nid_to_group_id looks up the group corresponding to |nid|. On success, it // sets |*out_group_id| to the group ID and returns one. Otherwise, it returns // zero. int ssl_nid_to_group_id(uint16_t *out_group_id, int nid); // ssl_name_to_group_id looks up the group corresponding to the |name| string // of length |len|. On success, it sets |*out_group_id| to the group ID and // returns one. Otherwise, it returns zero. int ssl_name_to_group_id(uint16_t *out_group_id, const char *name, size_t len); // Handshake messages. struct SSLMessage { bool is_v2_hello; uint8_t type; CBS body; // raw is the entire serialized handshake message, including the TLS or DTLS // message header. CBS raw; }; // SSL_MAX_HANDSHAKE_FLIGHT is the number of messages, including // ChangeCipherSpec, in the longest handshake flight. Currently this is the // client's second leg in a full handshake when client certificates, NPN, and // Channel ID, are all enabled. #define SSL_MAX_HANDSHAKE_FLIGHT 7 // ssl_max_handshake_message_len returns the maximum number of bytes permitted // in a handshake message for |ssl|. size_t ssl_max_handshake_message_len(const SSL *ssl); // dtls_clear_incoming_messages releases all buffered incoming messages. void dtls_clear_incoming_messages(SSL *ssl); // dtls_has_incoming_messages returns one if there are buffered incoming // messages ahead of the current message and zero otherwise. int dtls_has_incoming_messages(const SSL *ssl); struct DTLS_OUTGOING_MESSAGE { uint8_t *data; uint32_t len; uint16_t epoch; char is_ccs; }; // dtls_clear_outgoing_messages releases all buffered outgoing messages. void dtls_clear_outgoing_messages(SSL *ssl); // Callbacks. // ssl_do_info_callback calls |ssl|'s info callback, if set. void ssl_do_info_callback(const SSL *ssl, int type, int value); // ssl_do_msg_callback calls |ssl|'s message callback, if set. void ssl_do_msg_callback(SSL *ssl, int is_write, int content_type, const void *buf, size_t len); // Transport buffers. // ssl_read_buffer returns a pointer to contents of the read buffer. uint8_t *ssl_read_buffer(SSL *ssl); // ssl_read_buffer_len returns the length of the read buffer. size_t ssl_read_buffer_len(const SSL *ssl); // ssl_read_buffer_extend_to extends the read buffer to the desired length. For // TLS, it reads to the end of the buffer until the buffer is |len| bytes // long. For DTLS, it reads a new packet and ignores |len|. It returns one on // success, zero on EOF, and a negative number on error. // // It is an error to call |ssl_read_buffer_extend_to| in DTLS when the buffer is // non-empty. int ssl_read_buffer_extend_to(SSL *ssl, size_t len); // ssl_read_buffer_consume consumes |len| bytes from the read buffer. It // advances the data pointer and decrements the length. The memory consumed will // remain valid until the next call to |ssl_read_buffer_extend| or it is // discarded with |ssl_read_buffer_discard|. void ssl_read_buffer_consume(SSL *ssl, size_t len); // ssl_read_buffer_discard discards the consumed bytes from the read buffer. If // the buffer is now empty, it releases memory used by it. void ssl_read_buffer_discard(SSL *ssl); // ssl_read_buffer_clear releases all memory associated with the read buffer and // zero-initializes it. void ssl_read_buffer_clear(SSL *ssl); // ssl_write_buffer_is_pending returns one if the write buffer has pending data // and zero if is empty. int ssl_write_buffer_is_pending(const SSL *ssl); // ssl_write_buffer_init initializes the write buffer. On success, it sets // |*out_ptr| to the start of the write buffer with space for up to |max_len| // bytes. It returns one on success and zero on failure. Call // |ssl_write_buffer_set_len| to complete initialization. int ssl_write_buffer_init(SSL *ssl, uint8_t **out_ptr, size_t max_len); // ssl_write_buffer_set_len is called after |ssl_write_buffer_init| to complete // initialization after |len| bytes are written to the buffer. void ssl_write_buffer_set_len(SSL *ssl, size_t len); // ssl_write_buffer_flush flushes the write buffer to the transport. It returns // one on success and <= 0 on error. For DTLS, whether or not the write // succeeds, the write buffer will be cleared. int ssl_write_buffer_flush(SSL *ssl); // ssl_write_buffer_clear releases all memory associated with the write buffer // and zero-initializes it. void ssl_write_buffer_clear(SSL *ssl); // Certificate functions. // ssl_has_certificate returns one if a certificate and private key are // configured and zero otherwise. int ssl_has_certificate(const SSL *ssl); // ssl_parse_cert_chain parses a certificate list from |cbs| in the format used // by a TLS Certificate message. On success, it advances |cbs| and returns // true. Otherwise, it returns false and sets |*out_alert| to an alert to send // to the peer. // // If the list is non-empty then |*out_chain| and |*out_pubkey| will be set to // the certificate chain and the leaf certificate's public key // respectively. Otherwise, both will be set to nullptr. // // If the list is non-empty and |out_leaf_sha256| is non-NULL, it writes the // SHA-256 hash of the leaf to |out_leaf_sha256|. bool ssl_parse_cert_chain(uint8_t *out_alert, UniquePtr *out_chain, UniquePtr *out_pubkey, uint8_t *out_leaf_sha256, CBS *cbs, CRYPTO_BUFFER_POOL *pool); // ssl_add_cert_chain adds |ssl|'s certificate chain to |cbb| in the format used // by a TLS Certificate message. If there is no certificate chain, it emits an // empty certificate list. It returns one on success and zero on error. int ssl_add_cert_chain(SSL *ssl, CBB *cbb); // ssl_cert_check_digital_signature_key_usage parses the DER-encoded, X.509 // certificate in |in| and returns one if doesn't specify a key usage or, if it // does, if it includes digitalSignature. Otherwise it pushes to the error // queue and returns zero. int ssl_cert_check_digital_signature_key_usage(const CBS *in); // ssl_cert_parse_pubkey extracts the public key from the DER-encoded, X.509 // certificate in |in|. It returns an allocated |EVP_PKEY| or else returns // nullptr and pushes to the error queue. UniquePtr ssl_cert_parse_pubkey(const CBS *in); // ssl_parse_client_CA_list parses a CA list from |cbs| in the format used by a // TLS CertificateRequest message. On success, it returns a newly-allocated // |CRYPTO_BUFFER| list and advances |cbs|. Otherwise, it returns nullptr and // sets |*out_alert| to an alert to send to the peer. UniquePtr ssl_parse_client_CA_list(SSL *ssl, uint8_t *out_alert, CBS *cbs); // ssl_add_client_CA_list adds the configured CA list to |cbb| in the format // used by a TLS CertificateRequest message. It returns one on success and zero // on error. int ssl_add_client_CA_list(SSL *ssl, CBB *cbb); // ssl_check_leaf_certificate returns one if |pkey| and |leaf| are suitable as // a server's leaf certificate for |hs|. Otherwise, it returns zero and pushes // an error on the error queue. int ssl_check_leaf_certificate(SSL_HANDSHAKE *hs, EVP_PKEY *pkey, const CRYPTO_BUFFER *leaf); // ssl_on_certificate_selected is called once the certificate has been selected. // It finalizes the certificate and initializes |hs->local_pubkey|. It returns // one on success and zero on error. int ssl_on_certificate_selected(SSL_HANDSHAKE *hs); // TLS 1.3 key derivation. // tls13_init_key_schedule initializes the handshake hash and key derivation // state. The cipher suite and PRF hash must have been selected at this point. // It returns one on success and zero on error. int tls13_init_key_schedule(SSL_HANDSHAKE *hs); // tls13_init_early_key_schedule initializes the handshake hash and key // derivation state from the resumption secret to derive the early secrets. It // returns one on success and zero on error. int tls13_init_early_key_schedule(SSL_HANDSHAKE *hs); // tls13_advance_key_schedule incorporates |in| into the key schedule with // HKDF-Extract. It returns one on success and zero on error. int tls13_advance_key_schedule(SSL_HANDSHAKE *hs, const uint8_t *in, size_t len); // tls13_set_traffic_key sets the read or write traffic keys to // |traffic_secret|. It returns one on success and zero on error. int tls13_set_traffic_key(SSL *ssl, enum evp_aead_direction_t direction, const uint8_t *traffic_secret, size_t traffic_secret_len); // tls13_derive_early_secrets derives the early traffic secret. It returns one // on success and zero on error. int tls13_derive_early_secrets(SSL_HANDSHAKE *hs); // tls13_derive_handshake_secrets derives the handshake traffic secret. It // returns one on success and zero on error. int tls13_derive_handshake_secrets(SSL_HANDSHAKE *hs); // tls13_rotate_traffic_key derives the next read or write traffic secret. It // returns one on success and zero on error. int tls13_rotate_traffic_key(SSL *ssl, enum evp_aead_direction_t direction); // tls13_derive_application_secrets derives the initial application data traffic // and exporter secrets based on the handshake transcripts and |master_secret|. // It returns one on success and zero on error. int tls13_derive_application_secrets(SSL_HANDSHAKE *hs); // tls13_derive_resumption_secret derives the |resumption_secret|. int tls13_derive_resumption_secret(SSL_HANDSHAKE *hs); // tls13_export_keying_material provides an exporter interface to use the // |exporter_secret|. int tls13_export_keying_material(SSL *ssl, uint8_t *out, size_t out_len, const char *label, size_t label_len, const uint8_t *context, size_t context_len, int use_context); // tls13_finished_mac calculates the MAC of the handshake transcript to verify // the integrity of the Finished message, and stores the result in |out| and // length in |out_len|. |is_server| is 1 if this is for the Server Finished and // 0 for the Client Finished. int tls13_finished_mac(SSL_HANDSHAKE *hs, uint8_t *out, size_t *out_len, int is_server); // tls13_write_psk_binder calculates the PSK binder value and replaces the last // bytes of |msg| with the resulting value. It returns 1 on success, and 0 on // failure. int tls13_write_psk_binder(SSL_HANDSHAKE *hs, uint8_t *msg, size_t len); // tls13_verify_psk_binder verifies that the handshake transcript, truncated // up to the binders has a valid signature using the value of |session|'s // resumption secret. It returns 1 on success, and 0 on failure. int tls13_verify_psk_binder(SSL_HANDSHAKE *hs, SSL_SESSION *session, const SSLMessage &msg, CBS *binders); // Handshake functions. enum ssl_hs_wait_t { ssl_hs_error, ssl_hs_ok, ssl_hs_read_server_hello, ssl_hs_read_message, ssl_hs_flush, ssl_hs_certificate_selection_pending, ssl_hs_x509_lookup, ssl_hs_channel_id_lookup, ssl_hs_private_key_operation, ssl_hs_pending_session, ssl_hs_pending_ticket, ssl_hs_early_return, ssl_hs_early_data_rejected, ssl_hs_read_end_of_early_data, ssl_hs_read_change_cipher_spec, ssl_hs_certificate_verify, }; struct SSL_HANDSHAKE { explicit SSL_HANDSHAKE(SSL *ssl); ~SSL_HANDSHAKE(); static constexpr bool kAllowUniquePtr = true; // ssl is a non-owning pointer to the parent |SSL| object. SSL *ssl; // wait contains the operation the handshake is currently blocking on or // |ssl_hs_ok| if none. enum ssl_hs_wait_t wait = ssl_hs_ok; // state is the internal state for the TLS 1.2 and below handshake. Its // values depend on |do_handshake| but the starting state is always zero. int state = 0; // tls13_state is the internal state for the TLS 1.3 handshake. Its values // depend on |do_handshake| but the starting state is always zero. int tls13_state = 0; // min_version is the minimum accepted protocol version, taking account both // |SSL_OP_NO_*| and |SSL_CTX_set_min_proto_version| APIs. uint16_t min_version = 0; // max_version is the maximum accepted protocol version, taking account both // |SSL_OP_NO_*| and |SSL_CTX_set_max_proto_version| APIs. uint16_t max_version = 0; // session_id is the session ID in the ClientHello, used for the experimental // TLS 1.3 variant. uint8_t session_id[SSL_MAX_SSL_SESSION_ID_LENGTH] = {0}; uint8_t session_id_len = 0; size_t hash_len = 0; uint8_t secret[EVP_MAX_MD_SIZE] = {0}; uint8_t early_traffic_secret[EVP_MAX_MD_SIZE] = {0}; uint8_t client_handshake_secret[EVP_MAX_MD_SIZE] = {0}; uint8_t server_handshake_secret[EVP_MAX_MD_SIZE] = {0}; uint8_t client_traffic_secret_0[EVP_MAX_MD_SIZE] = {0}; uint8_t server_traffic_secret_0[EVP_MAX_MD_SIZE] = {0}; uint8_t expected_client_finished[EVP_MAX_MD_SIZE] = {0}; union { // sent is a bitset where the bits correspond to elements of kExtensions // in t1_lib.c. Each bit is set if that extension was sent in a // ClientHello. It's not used by servers. uint32_t sent = 0; // received is a bitset, like |sent|, but is used by servers to record // which extensions were received from a client. uint32_t received; } extensions; union { // sent is a bitset where the bits correspond to elements of // |client_custom_extensions| in the |SSL_CTX|. Each bit is set if that // extension was sent in a ClientHello. It's not used by servers. uint16_t sent = 0; // received is a bitset, like |sent|, but is used by servers to record // which custom extensions were received from a client. The bits here // correspond to |server_custom_extensions|. uint16_t received; } custom_extensions; // retry_group is the group ID selected by the server in HelloRetryRequest in // TLS 1.3. uint16_t retry_group = 0; // key_share is the current key exchange instance. UniquePtr key_share; // transcript is the current handshake transcript. SSLTranscript transcript; // cookie is the value of the cookie received from the server, if any. Array cookie; // key_share_bytes is the value of the previously sent KeyShare extension by // the client in TLS 1.3. Array key_share_bytes; // ecdh_public_key, for servers, is the key share to be sent to the client in // TLS 1.3. Array ecdh_public_key; // peer_sigalgs are the signature algorithms that the peer supports. These are // taken from the contents of the signature algorithms extension for a server // or from the CertificateRequest for a client. Array peer_sigalgs; // peer_supported_group_list contains the supported group IDs advertised by // the peer. This is only set on the server's end. The server does not // advertise this extension to the client. Array peer_supported_group_list; // peer_key is the peer's ECDH key for a TLS 1.2 client. Array peer_key; // server_params, in a TLS 1.2 server, stores the ServerKeyExchange // parameters. It has client and server randoms prepended for signing // convenience. Array server_params; // peer_psk_identity_hint, on the client, is the psk_identity_hint sent by the // server when using a TLS 1.2 PSK key exchange. UniquePtr peer_psk_identity_hint; // ca_names, on the client, contains the list of CAs received in a // CertificateRequest message. UniquePtr ca_names; // cached_x509_ca_names contains a cache of parsed versions of the elements of // |ca_names|. This pointer is left non-owning so only // |ssl_crypto_x509_method| needs to link against crypto/x509. STACK_OF(X509_NAME) *cached_x509_ca_names = nullptr; // certificate_types, on the client, contains the set of certificate types // received in a CertificateRequest message. Array certificate_types; // local_pubkey is the public key we are authenticating as. UniquePtr local_pubkey; // peer_pubkey is the public key parsed from the peer's leaf certificate. UniquePtr peer_pubkey; // new_session is the new mutable session being established by the current // handshake. It should not be cached. UniquePtr new_session; // early_session is the session corresponding to the current 0-RTT state on // the client if |in_early_data| is true. UniquePtr early_session; // new_cipher is the cipher being negotiated in this handshake. const SSL_CIPHER *new_cipher = nullptr; // key_block is the record-layer key block for TLS 1.2 and earlier. Array key_block; // scts_requested is true if the SCT extension is in the ClientHello. bool scts_requested:1; // needs_psk_binder is true if the ClientHello has a placeholder PSK binder to // be filled in. bool needs_psk_binder:1; bool received_hello_retry_request:1; bool received_custom_extension:1; // handshake_finalized is true once the handshake has completed, at which // point accessors should use the established state. bool handshake_finalized:1; // accept_psk_mode stores whether the client's PSK mode is compatible with our // preferences. bool accept_psk_mode:1; // cert_request is true if a client certificate was requested. bool cert_request:1; // certificate_status_expected is true if OCSP stapling was negotiated and the // server is expected to send a CertificateStatus message. (This is used on // both the client and server sides.) bool certificate_status_expected:1; // ocsp_stapling_requested is true if a client requested OCSP stapling. bool ocsp_stapling_requested:1; // should_ack_sni is used by a server and indicates that the SNI extension // should be echoed in the ServerHello. bool should_ack_sni:1; // in_false_start is true if there is a pending client handshake in False // Start. The client may write data at this point. bool in_false_start:1; // in_early_data is true if there is a pending handshake that has progressed // enough to send and receive early data. bool in_early_data:1; // early_data_offered is true if the client sent the early_data extension. bool early_data_offered:1; // can_early_read is true if application data may be read at this point in the // handshake. bool can_early_read:1; // can_early_write is true if application data may be written at this point in // the handshake. bool can_early_write:1; // next_proto_neg_seen is one of NPN was negotiated. bool next_proto_neg_seen:1; // ticket_expected is true if a TLS 1.2 NewSessionTicket message is to be sent // or received. bool ticket_expected:1; // extended_master_secret is true if the extended master secret extension is // negotiated in this handshake. bool extended_master_secret:1; // pending_private_key_op is true if there is a pending private key operation // in progress. bool pending_private_key_op:1; // client_version is the value sent or received in the ClientHello version. uint16_t client_version = 0; // early_data_read is the amount of early data that has been read by the // record layer. uint16_t early_data_read = 0; // early_data_written is the amount of early data that has been written by the // record layer. uint16_t early_data_written = 0; }; SSL_HANDSHAKE *ssl_handshake_new(SSL *ssl); // ssl_handshake_free releases all memory associated with |hs|. void ssl_handshake_free(SSL_HANDSHAKE *hs); // ssl_check_message_type checks if |msg| has type |type|. If so it returns // one. Otherwise, it sends an alert and returns zero. int ssl_check_message_type(SSL *ssl, const SSLMessage &msg, int type); // ssl_run_handshake runs the TLS handshake. It returns one on success and <= 0 // on error. It sets |out_early_return| to one if we've completed the handshake // early. int ssl_run_handshake(SSL_HANDSHAKE *hs, bool *out_early_return); // The following are implementations of |do_handshake| for the client and // server. enum ssl_hs_wait_t ssl_client_handshake(SSL_HANDSHAKE *hs); enum ssl_hs_wait_t ssl_server_handshake(SSL_HANDSHAKE *hs); enum ssl_hs_wait_t tls13_client_handshake(SSL_HANDSHAKE *hs); enum ssl_hs_wait_t tls13_server_handshake(SSL_HANDSHAKE *hs); // The following functions return human-readable representations of the TLS // handshake states for debugging. const char *ssl_client_handshake_state(SSL_HANDSHAKE *hs); const char *ssl_server_handshake_state(SSL_HANDSHAKE *hs); const char *tls13_client_handshake_state(SSL_HANDSHAKE *hs); const char *tls13_server_handshake_state(SSL_HANDSHAKE *hs); // tls13_post_handshake processes a post-handshake message. It returns one on // success and zero on failure. int tls13_post_handshake(SSL *ssl, const SSLMessage &msg); int tls13_process_certificate(SSL_HANDSHAKE *hs, const SSLMessage &msg, int allow_anonymous); int tls13_process_certificate_verify(SSL_HANDSHAKE *hs, const SSLMessage &msg); // tls13_process_finished processes |msg| as a Finished message from the // peer. If |use_saved_value| is one, the verify_data is compared against // |hs->expected_client_finished| rather than computed fresh. int tls13_process_finished(SSL_HANDSHAKE *hs, const SSLMessage &msg, int use_saved_value); int tls13_add_certificate(SSL_HANDSHAKE *hs); // tls13_add_certificate_verify adds a TLS 1.3 CertificateVerify message to the // handshake. If it returns |ssl_private_key_retry|, it should be called again // to retry when the signing operation is completed. enum ssl_private_key_result_t tls13_add_certificate_verify(SSL_HANDSHAKE *hs); int tls13_add_finished(SSL_HANDSHAKE *hs); int tls13_process_new_session_ticket(SSL *ssl, const SSLMessage &msg); int ssl_ext_key_share_parse_serverhello(SSL_HANDSHAKE *hs, Array *out_secret, uint8_t *out_alert, CBS *contents); int ssl_ext_key_share_parse_clienthello(SSL_HANDSHAKE *hs, bool *out_found, Array *out_secret, uint8_t *out_alert, CBS *contents); int ssl_ext_key_share_add_serverhello(SSL_HANDSHAKE *hs, CBB *out); int ssl_ext_pre_shared_key_parse_serverhello(SSL_HANDSHAKE *hs, uint8_t *out_alert, CBS *contents); int ssl_ext_pre_shared_key_parse_clienthello( SSL_HANDSHAKE *hs, CBS *out_ticket, CBS *out_binders, uint32_t *out_obfuscated_ticket_age, uint8_t *out_alert, CBS *contents); int ssl_ext_pre_shared_key_add_serverhello(SSL_HANDSHAKE *hs, CBB *out); // ssl_is_sct_list_valid does a shallow parse of the SCT list in |contents| and // returns one iff it's valid. int ssl_is_sct_list_valid(const CBS *contents); int ssl_write_client_hello(SSL_HANDSHAKE *hs); enum ssl_cert_verify_context_t { ssl_cert_verify_server, ssl_cert_verify_client, ssl_cert_verify_channel_id, }; // tls13_get_cert_verify_signature_input generates the message to be signed for // TLS 1.3's CertificateVerify message. |cert_verify_context| determines the // type of signature. It sets |*out| and |*out_len| to a newly allocated buffer // containing the result. The caller must free it with |OPENSSL_free| to release // it. This function returns one on success and zero on failure. int tls13_get_cert_verify_signature_input( SSL_HANDSHAKE *hs, uint8_t **out, size_t *out_len, enum ssl_cert_verify_context_t cert_verify_context); // ssl_negotiate_alpn negotiates the ALPN extension, if applicable. It returns // one on successful negotiation or if nothing was negotiated. It returns zero // and sets |*out_alert| to an alert on error. int ssl_negotiate_alpn(SSL_HANDSHAKE *hs, uint8_t *out_alert, const SSL_CLIENT_HELLO *client_hello); struct SSL_EXTENSION_TYPE { uint16_t type; bool *out_present; CBS *out_data; }; // ssl_parse_extensions parses a TLS extensions block out of |cbs| and advances // it. It writes the parsed extensions to pointers denoted by |ext_types|. On // success, it fills in the |out_present| and |out_data| fields and returns one. // Otherwise, it sets |*out_alert| to an alert to send and returns zero. Unknown // extensions are rejected unless |ignore_unknown| is 1. int ssl_parse_extensions(const CBS *cbs, uint8_t *out_alert, const SSL_EXTENSION_TYPE *ext_types, size_t num_ext_types, int ignore_unknown); // ssl_verify_peer_cert verifies the peer certificate for |hs|. enum ssl_verify_result_t ssl_verify_peer_cert(SSL_HANDSHAKE *hs); // SSLKEYLOGFILE functions. // ssl_log_secret logs |secret| with label |label|, if logging is enabled for // |ssl|. It returns one on success and zero on failure. int ssl_log_secret(const SSL *ssl, const char *label, const uint8_t *secret, size_t secret_len); // ClientHello functions. int ssl_client_hello_init(SSL *ssl, SSL_CLIENT_HELLO *out, const SSLMessage &msg); int ssl_client_hello_get_extension(const SSL_CLIENT_HELLO *client_hello, CBS *out, uint16_t extension_type); int ssl_client_cipher_list_contains_cipher(const SSL_CLIENT_HELLO *client_hello, uint16_t id); // GREASE. enum ssl_grease_index_t { ssl_grease_cipher = 0, ssl_grease_group, ssl_grease_extension1, ssl_grease_extension2, ssl_grease_version, ssl_grease_ticket_extension, }; // ssl_get_grease_value returns a GREASE value for |ssl|. For a given // connection, the values for each index will be deterministic. This allows the // same ClientHello be sent twice for a HelloRetryRequest or the same group be // advertised in both supported_groups and key_shares. uint16_t ssl_get_grease_value(const SSL *ssl, enum ssl_grease_index_t index); // Signature algorithms. // tls1_parse_peer_sigalgs parses |sigalgs| as the list of peer signature // algorithms and saves them on |hs|. It returns one on success and zero on // error. int tls1_parse_peer_sigalgs(SSL_HANDSHAKE *hs, const CBS *sigalgs); // tls1_get_legacy_signature_algorithm sets |*out| to the signature algorithm // that should be used with |pkey| in TLS 1.1 and earlier. It returns one on // success and zero if |pkey| may not be used at those versions. int tls1_get_legacy_signature_algorithm(uint16_t *out, const EVP_PKEY *pkey); // tls1_choose_signature_algorithm sets |*out| to a signature algorithm for use // with |hs|'s private key based on the peer's preferences and the algorithms // supported. It returns one on success and zero on error. int tls1_choose_signature_algorithm(SSL_HANDSHAKE *hs, uint16_t *out); // tls12_add_verify_sigalgs adds the signature algorithms acceptable for the // peer signature to |out|. It returns one on success and zero on error. int tls12_add_verify_sigalgs(const SSL *ssl, CBB *out); // tls12_check_peer_sigalg checks if |sigalg| is acceptable for the peer // signature. It returns one on success and zero on error, setting |*out_alert| // to an alert to send. int tls12_check_peer_sigalg(SSL *ssl, uint8_t *out_alert, uint16_t sigalg); // Underdocumented functions. // // Functions below here haven't been touched up and may be underdocumented. #define TLSEXT_CHANNEL_ID_SIZE 128 // From RFC4492, used in encoding the curve type in ECParameters #define NAMED_CURVE_TYPE 3 struct SSLCertConfig { EVP_PKEY *privatekey; // chain contains the certificate chain, with the leaf at the beginning. The // first element of |chain| may be NULL to indicate that the leaf certificate // has not yet been set. // If |chain| != NULL -> len(chain) >= 1 // If |chain[0]| == NULL -> len(chain) >= 2. // |chain[1..]| != NULL STACK_OF(CRYPTO_BUFFER) *chain; // x509_chain may contain a parsed copy of |chain[1..]|. This is only used as // a cache in order to implement “get0” functions that return a non-owning // pointer to the certificate chain. STACK_OF(X509) *x509_chain; // x509_leaf may contain a parsed copy of the first element of |chain|. This // is only used as a cache in order to implement “get0” functions that return // a non-owning pointer to the certificate chain. X509 *x509_leaf; // x509_stash contains the last |X509| object append to the chain. This is a // workaround for some third-party code that continue to use an |X509| object // even after passing ownership with an “add0” function. X509 *x509_stash; // key_method, if non-NULL, is a set of callbacks to call for private key // operations. const SSL_PRIVATE_KEY_METHOD *key_method; // x509_method contains pointers to functions that might deal with |X509| // compatibility, or might be a no-op, depending on the application. const SSL_X509_METHOD *x509_method; // sigalgs, if non-NULL, is the set of signature algorithms supported by // |privatekey| in decreasing order of preference. uint16_t *sigalgs; size_t num_sigalgs; // Certificate setup callback: if set is called whenever a // certificate may be required (client or server). the callback // can then examine any appropriate parameters and setup any // certificates required. This allows advanced applications // to select certificates on the fly: for example based on // supported signature algorithms or curves. int (*cert_cb)(SSL *ssl, void *arg); void *cert_cb_arg; // Optional X509_STORE for certificate validation. If NULL the parent SSL_CTX // store is used instead. X509_STORE *verify_store; // Signed certificate timestamp list to be sent to the client, if requested CRYPTO_BUFFER *signed_cert_timestamp_list; // OCSP response to be sent to the client, if requested. CRYPTO_BUFFER *ocsp_response; // sid_ctx partitions the session space within a shared session cache or // ticket key. Only sessions with a matching value will be accepted. uint8_t sid_ctx_length; uint8_t sid_ctx[SSL_MAX_SID_CTX_LENGTH]; // If enable_early_data is true, early data can be sent and accepted. bool enable_early_data:1; }; // ssl_crypto_x509_method provides the |SSL_X509_METHOD| functions using // crypto/x509. extern const SSL_X509_METHOD ssl_crypto_x509_method; // ssl_noop_x509_method provides the |SSL_X509_METHOD| functions that avoid // crypto/x509. extern const SSL_X509_METHOD ssl_noop_x509_method; struct SSL3_RECORD { // type is the record type. uint8_t type; // length is the number of unconsumed bytes in the record. uint16_t length; // data is a non-owning pointer to the first unconsumed byte of the record. uint8_t *data; }; struct SSL3_BUFFER { // buf is the memory allocated for this buffer. uint8_t *buf; // offset is the offset into |buf| which the buffer contents start at. uint16_t offset; // len is the length of the buffer contents from |buf| + |offset|. uint16_t len; // cap is how much memory beyond |buf| + |offset| is available. uint16_t cap; }; // An ssl_shutdown_t describes the shutdown state of one end of the connection, // whether it is alive or has been shutdown via close_notify or fatal alert. enum ssl_shutdown_t { ssl_shutdown_none = 0, ssl_shutdown_close_notify = 1, ssl_shutdown_fatal_alert = 2, }; struct SSL3_STATE { uint8_t read_sequence[8]; uint8_t write_sequence[8]; uint8_t server_random[SSL3_RANDOM_SIZE]; uint8_t client_random[SSL3_RANDOM_SIZE]; // read_buffer holds data from the transport to be processed. SSL3_BUFFER read_buffer; // write_buffer holds data to be written to the transport. SSL3_BUFFER write_buffer; SSL3_RECORD rrec; // each decoded record goes in here // partial write - check the numbers match unsigned int wnum; // number of bytes sent so far int wpend_tot; // number bytes written int wpend_type; int wpend_ret; // number of bytes submitted const uint8_t *wpend_buf; // recv_shutdown is the shutdown state for the receive half of the // connection. enum ssl_shutdown_t recv_shutdown; // recv_shutdown is the shutdown state for the send half of the connection. enum ssl_shutdown_t send_shutdown; int alert_dispatch; int total_renegotiations; // early_data_skipped is the amount of early data that has been skipped by the // record layer. uint16_t early_data_skipped; // empty_record_count is the number of consecutive empty records received. uint8_t empty_record_count; // warning_alert_count is the number of consecutive warning alerts // received. uint8_t warning_alert_count; // key_update_count is the number of consecutive KeyUpdates received. uint8_t key_update_count; // skip_early_data instructs the record layer to skip unexpected early data // messages when 0RTT is rejected. bool skip_early_data:1; // have_version is true if the connection's final version is known. Otherwise // the version has not been negotiated yet. bool have_version:1; // v2_hello_done is true if the peer's V2ClientHello, if any, has been handled // and future messages should use the record layer. bool v2_hello_done:1; // is_v2_hello is true if the current handshake message was derived from a // V2ClientHello rather than received from the peer directly. bool is_v2_hello:1; // has_message is true if the current handshake message has been returned // at least once by |get_message| and false otherwise. bool has_message:1; // initial_handshake_complete is true if the initial handshake has // completed. bool initial_handshake_complete:1; // session_reused indicates whether a session was resumed. bool session_reused:1; bool send_connection_binding:1; // In a client, this means that the server supported Channel ID and that a // Channel ID was sent. In a server it means that we echoed support for // Channel IDs and that tlsext_channel_id will be valid after the // handshake. bool tlsext_channel_id_valid:1; // key_update_pending is true if we have a KeyUpdate acknowledgment // outstanding. bool key_update_pending:1; // wpend_pending is true if we have a pending write outstanding. bool wpend_pending:1; uint8_t send_alert[2]; // pending_flight is the pending outgoing flight. This is used to flush each // handshake flight in a single write. |write_buffer| must be written out // before this data. BUF_MEM *pending_flight; // pending_flight_offset is the number of bytes of |pending_flight| which have // been successfully written. uint32_t pending_flight_offset; // aead_read_ctx is the current read cipher state. SSLAEADContext *aead_read_ctx; // aead_write_ctx is the current write cipher state. SSLAEADContext *aead_write_ctx; // hs is the handshake state for the current handshake or NULL if there isn't // one. SSL_HANDSHAKE *hs; uint8_t write_traffic_secret[EVP_MAX_MD_SIZE]; uint8_t read_traffic_secret[EVP_MAX_MD_SIZE]; uint8_t exporter_secret[EVP_MAX_MD_SIZE]; uint8_t early_exporter_secret[EVP_MAX_MD_SIZE]; uint8_t write_traffic_secret_len; uint8_t read_traffic_secret_len; uint8_t exporter_secret_len; uint8_t early_exporter_secret_len; // Connection binding to prevent renegotiation attacks uint8_t previous_client_finished[12]; uint8_t previous_client_finished_len; uint8_t previous_server_finished_len; uint8_t previous_server_finished[12]; // State pertaining to the pending handshake. // // TODO(davidben): Move everything not needed after the handshake completes to // |hs| and remove this. struct { uint8_t new_mac_secret_len; uint8_t new_key_len; uint8_t new_fixed_iv_len; } tmp; // established_session is the session established by the connection. This // session is only filled upon the completion of the handshake and is // immutable. SSL_SESSION *established_session; // Next protocol negotiation. For the client, this is the protocol that we // sent in NextProtocol and is set when handling ServerHello extensions. // // For a server, this is the client's selected_protocol from NextProtocol and // is set when handling the NextProtocol message, before the Finished // message. uint8_t *next_proto_negotiated; size_t next_proto_negotiated_len; // ALPN information // (we are in the process of transitioning from NPN to ALPN.) // In a server these point to the selected ALPN protocol after the // ClientHello has been processed. In a client these contain the protocol // that the server selected once the ServerHello has been processed. uint8_t *alpn_selected; size_t alpn_selected_len; // hostname, on the server, is the value of the SNI extension. char *hostname; // For a server: // If |tlsext_channel_id_valid| is true, then this contains the // verified Channel ID from the client: a P256 point, (x,y), where // each are big-endian values. uint8_t tlsext_channel_id[64]; // ticket_age_skew is the difference, in seconds, between the client-sent // ticket age and the server-computed value in TLS 1.3 server connections // which resumed a session. int32_t ticket_age_skew; }; // lengths of messages #define DTLS1_COOKIE_LENGTH 256 #define DTLS1_RT_HEADER_LENGTH 13 #define DTLS1_HM_HEADER_LENGTH 12 #define DTLS1_CCS_HEADER_LENGTH 1 #define DTLS1_AL_HEADER_LENGTH 2 struct hm_header_st { uint8_t type; uint32_t msg_len; uint16_t seq; uint32_t frag_off; uint32_t frag_len; }; // An hm_fragment is an incoming DTLS message, possibly not yet assembled. struct hm_fragment { // type is the type of the message. uint8_t type; // seq is the sequence number of this message. uint16_t seq; // msg_len is the length of the message body. uint32_t msg_len; // data is a pointer to the message, including message header. It has length // |DTLS1_HM_HEADER_LENGTH| + |msg_len|. uint8_t *data; // reassembly is a bitmask of |msg_len| bits corresponding to which parts of // the message have been received. It is NULL if the message is complete. uint8_t *reassembly; }; struct OPENSSL_timeval { uint64_t tv_sec; uint32_t tv_usec; }; struct DTLS1_STATE { // has_change_cipher_spec is true if we have received a ChangeCipherSpec from // the peer in this epoch. bool has_change_cipher_spec:1; // outgoing_messages_complete is true if |outgoing_messages| has been // completed by an attempt to flush it. Future calls to |add_message| and // |add_change_cipher_spec| will start a new flight. bool outgoing_messages_complete:1; // flight_has_reply is true if the current outgoing flight is complete and has // processed at least one message. This is used to detect whether we or the // peer sent the final flight. bool flight_has_reply:1; uint8_t cookie[DTLS1_COOKIE_LENGTH]; size_t cookie_len; // The current data and handshake epoch. This is initially undefined, and // starts at zero once the initial handshake is completed. uint16_t r_epoch; uint16_t w_epoch; // records being received in the current epoch DTLS1_BITMAP bitmap; uint16_t handshake_write_seq; uint16_t handshake_read_seq; // save last sequence number for retransmissions uint8_t last_write_sequence[8]; SSLAEADContext *last_aead_write_ctx; // incoming_messages is a ring buffer of incoming handshake messages that have // yet to be processed. The front of the ring buffer is message number // |handshake_read_seq|, at position |handshake_read_seq| % // |SSL_MAX_HANDSHAKE_FLIGHT|. hm_fragment *incoming_messages[SSL_MAX_HANDSHAKE_FLIGHT]; // outgoing_messages is the queue of outgoing messages from the last handshake // flight. DTLS_OUTGOING_MESSAGE outgoing_messages[SSL_MAX_HANDSHAKE_FLIGHT]; uint8_t outgoing_messages_len; // outgoing_written is the number of outgoing messages that have been // written. uint8_t outgoing_written; // outgoing_offset is the number of bytes of the next outgoing message have // been written. uint32_t outgoing_offset; unsigned int mtu; // max DTLS packet size // num_timeouts is the number of times the retransmit timer has fired since // the last time it was reset. unsigned int num_timeouts; // Indicates when the last handshake msg or heartbeat sent will // timeout. struct OPENSSL_timeval next_timeout; // timeout_duration_ms is the timeout duration in milliseconds. unsigned timeout_duration_ms; }; // SSLConnection backs the public |SSL| type. Due to compatibility constraints, // it is a base class for |ssl_st|. struct SSLConnection { // method is the method table corresponding to the current protocol (DTLS or // TLS). const SSL_PROTOCOL_METHOD *method; // version is the protocol version. uint16_t version; // conf_max_version is the maximum acceptable protocol version configured by // |SSL_set_max_proto_version|. Note this version is normalized in DTLS and is // further constrainted by |SSL_OP_NO_*|. uint16_t conf_max_version; // conf_min_version is the minimum acceptable protocol version configured by // |SSL_set_min_proto_version|. Note this version is normalized in DTLS and is // further constrainted by |SSL_OP_NO_*|. uint16_t conf_min_version; // tls13_variant is the variant of TLS 1.3 we are using for this // configuration. enum tls13_variant_t tls13_variant; uint16_t max_send_fragment; // There are 2 BIO's even though they are normally both the same. This is so // data can be read and written to different handlers BIO *rbio; // used by SSL_read BIO *wbio; // used by SSL_write // do_handshake runs the handshake. On completion, it returns |ssl_hs_ok|. // Otherwise, it returns a value corresponding to what operation is needed to // progress. enum ssl_hs_wait_t (*do_handshake)(SSL_HANDSHAKE *hs); BUF_MEM *init_buf; // buffer used during init SSL3_STATE *s3; // SSLv3 variables DTLS1_STATE *d1; // DTLSv1 variables // callback that allows applications to peek at protocol messages void (*msg_callback)(int write_p, int version, int content_type, const void *buf, size_t len, SSL *ssl, void *arg); void *msg_callback_arg; X509_VERIFY_PARAM *param; // crypto struct ssl_cipher_preference_list_st *cipher_list; // session info // client cert? // This is used to hold the server certificate used CERT *cert; // This holds a variable that indicates what we were doing when a 0 or -1 is // returned. This is needed for non-blocking IO so we know what request // needs re-doing when in SSL_accept or SSL_connect int rwstate; // initial_timeout_duration_ms is the default DTLS timeout duration in // milliseconds. It's used to initialize the timer any time it's restarted. unsigned initial_timeout_duration_ms; // session is the configured session to be offered by the client. This session // is immutable. SSL_SESSION *session; int (*verify_callback)(int ok, X509_STORE_CTX *ctx); // fail if callback returns 0 enum ssl_verify_result_t (*custom_verify_callback)(SSL *ssl, uint8_t *out_alert); void (*info_callback)(const SSL *ssl, int type, int value); // Server-only: psk_identity_hint is the identity hint to send in // PSK-based key exchanges. char *psk_identity_hint; unsigned int (*psk_client_callback)(SSL *ssl, const char *hint, char *identity, unsigned int max_identity_len, uint8_t *psk, unsigned int max_psk_len); unsigned int (*psk_server_callback)(SSL *ssl, const char *identity, uint8_t *psk, unsigned int max_psk_len); SSL_CTX *ctx; // extra application data CRYPTO_EX_DATA ex_data; // for server side, keep the list of CA_dn we can use STACK_OF(CRYPTO_BUFFER) *client_CA; // cached_x509_client_CA is a cache of parsed versions of the elements of // |client_CA|. STACK_OF(X509_NAME) *cached_x509_client_CA; uint32_t options; // protocol behaviour uint32_t mode; // API behaviour uint32_t max_cert_list; char *tlsext_hostname; size_t supported_group_list_len; uint16_t *supported_group_list; // our list // session_ctx is the |SSL_CTX| used for the session cache and related // settings. SSL_CTX *session_ctx; // srtp_profiles is the list of configured SRTP protection profiles for // DTLS-SRTP. STACK_OF(SRTP_PROTECTION_PROFILE) *srtp_profiles; // srtp_profile is the selected SRTP protection profile for // DTLS-SRTP. const SRTP_PROTECTION_PROFILE *srtp_profile; // The client's Channel ID private key. EVP_PKEY *tlsext_channel_id_private; // For a client, this contains the list of supported protocols in wire // format. uint8_t *alpn_client_proto_list; unsigned alpn_client_proto_list_len; // renegotiate_mode controls how peer renegotiation attempts are handled. enum ssl_renegotiate_mode_t renegotiate_mode; // verify_mode is a bitmask of |SSL_VERIFY_*| values. uint8_t verify_mode; // server is true iff the this SSL* is the server half. Note: before the SSL* // is initialized by either SSL_set_accept_state or SSL_set_connect_state, // the side is not determined. In this state, server is always false. unsigned server:1; // quiet_shutdown is true if the connection should not send a close_notify on // shutdown. unsigned quiet_shutdown:1; // Enable signed certificate time stamps. Currently client only. unsigned signed_cert_timestamps_enabled:1; // ocsp_stapling_enabled is only used by client connections and indicates // whether OCSP stapling will be requested. unsigned ocsp_stapling_enabled:1; // tlsext_channel_id_enabled is copied from the |SSL_CTX|. For a server, // means that we'll accept Channel IDs from clients. For a client, means that // we'll advertise support. unsigned tlsext_channel_id_enabled:1; // retain_only_sha256_of_client_certs is true if we should compute the SHA256 // hash of the peer's certificate and then discard it to save memory and // session space. Only effective on the server side. unsigned retain_only_sha256_of_client_certs:1; // early_data_accepted is true if early data was accepted by the server. unsigned early_data_accepted:1; }; // From draft-ietf-tls-tls13-18, used in determining PSK modes. #define SSL_PSK_KE 0x0 #define SSL_PSK_DHE_KE 0x1 // From draft-ietf-tls-tls13-16, used in determining whether to respond with a // KeyUpdate. #define SSL_KEY_UPDATE_NOT_REQUESTED 0 #define SSL_KEY_UPDATE_REQUESTED 1 // kMaxEarlyDataAccepted is the advertised number of plaintext bytes of early // data that will be accepted. This value should be slightly below // kMaxEarlyDataSkipped in tls_record.c, which is measured in ciphertext. static const size_t kMaxEarlyDataAccepted = 14336; CERT *ssl_cert_new(const SSL_X509_METHOD *x509_method); CERT *ssl_cert_dup(CERT *cert); void ssl_cert_clear_certs(CERT *cert); void ssl_cert_free(CERT *cert); int ssl_set_cert(CERT *cert, UniquePtr buffer); int ssl_is_key_type_supported(int key_type); // ssl_compare_public_and_private_key returns one if |pubkey| is the public // counterpart to |privkey|. Otherwise it returns zero and pushes a helpful // message on the error queue. int ssl_compare_public_and_private_key(const EVP_PKEY *pubkey, const EVP_PKEY *privkey); int ssl_cert_check_private_key(const CERT *cert, const EVP_PKEY *privkey); int ssl_get_new_session(SSL_HANDSHAKE *hs, int is_server); int ssl_encrypt_ticket(SSL *ssl, CBB *out, const SSL_SESSION *session); int ssl_ctx_rotate_ticket_encryption_key(SSL_CTX *ctx); // ssl_session_new returns a newly-allocated blank |SSL_SESSION| or nullptr on // error. UniquePtr ssl_session_new(const SSL_X509_METHOD *x509_method); // SSL_SESSION_parse parses an |SSL_SESSION| from |cbs| and advances |cbs| over // the parsed data. UniquePtr SSL_SESSION_parse(CBS *cbs, const SSL_X509_METHOD *x509_method, CRYPTO_BUFFER_POOL *pool); // ssl_session_is_context_valid returns one if |session|'s session ID context // matches the one set on |ssl| and zero otherwise. int ssl_session_is_context_valid(const SSL *ssl, const SSL_SESSION *session); // ssl_session_is_time_valid returns one if |session| is still valid and zero if // it has expired. int ssl_session_is_time_valid(const SSL *ssl, const SSL_SESSION *session); // ssl_session_is_resumable returns one if |session| is resumable for |hs| and // zero otherwise. int ssl_session_is_resumable(const SSL_HANDSHAKE *hs, const SSL_SESSION *session); // ssl_session_protocol_version returns the protocol version associated with // |session|. Note that despite the name, this is not the same as // |SSL_SESSION_get_protocol_version|. The latter is based on upstream's name. uint16_t ssl_session_protocol_version(const SSL_SESSION *session); // ssl_session_get_digest returns the digest used in |session|. const EVP_MD *ssl_session_get_digest(const SSL_SESSION *session); void ssl_set_session(SSL *ssl, SSL_SESSION *session); // ssl_get_prev_session looks up the previous session based on |client_hello|. // On success, it sets |*out_session| to the session or nullptr if none was // found. If the session could not be looked up synchronously, it returns // |ssl_hs_pending_session| and should be called again. If a ticket could not be // decrypted immediately it returns |ssl_hs_pending_ticket| and should also // be called again. Otherwise, it returns |ssl_hs_error|. enum ssl_hs_wait_t ssl_get_prev_session(SSL *ssl, UniquePtr *out_session, bool *out_tickets_supported, bool *out_renew_ticket, const SSL_CLIENT_HELLO *client_hello); // The following flags determine which parts of the session are duplicated. #define SSL_SESSION_DUP_AUTH_ONLY 0x0 #define SSL_SESSION_INCLUDE_TICKET 0x1 #define SSL_SESSION_INCLUDE_NONAUTH 0x2 #define SSL_SESSION_DUP_ALL \ (SSL_SESSION_INCLUDE_TICKET | SSL_SESSION_INCLUDE_NONAUTH) // SSL_SESSION_dup returns a newly-allocated |SSL_SESSION| with a copy of the // fields in |session| or nullptr on error. The new session is non-resumable and // must be explicitly marked resumable once it has been filled in. OPENSSL_EXPORT UniquePtr SSL_SESSION_dup(SSL_SESSION *session, int dup_flags); // ssl_session_rebase_time updates |session|'s start time to the current time, // adjusting the timeout so the expiration time is unchanged. void ssl_session_rebase_time(SSL *ssl, SSL_SESSION *session); // ssl_session_renew_timeout calls |ssl_session_rebase_time| and renews // |session|'s timeout to |timeout| (measured from the current time). The // renewal is clamped to the session's auth_timeout. void ssl_session_renew_timeout(SSL *ssl, SSL_SESSION *session, uint32_t timeout); void ssl_cipher_preference_list_free( struct ssl_cipher_preference_list_st *cipher_list); // ssl_get_cipher_preferences returns the cipher preference list for TLS 1.2 and // below. const struct ssl_cipher_preference_list_st *ssl_get_cipher_preferences( const SSL *ssl); void ssl_update_cache(SSL_HANDSHAKE *hs, int mode); enum ssl_hs_wait_t ssl_get_finished(SSL_HANDSHAKE *hs); int ssl3_send_alert(SSL *ssl, int level, int desc); bool ssl3_get_message(SSL *ssl, SSLMessage *out); int ssl3_read_message(SSL *ssl); void ssl3_next_message(SSL *ssl); int ssl3_send_finished(SSL_HANDSHAKE *hs); int ssl3_dispatch_alert(SSL *ssl); int ssl3_read_app_data(SSL *ssl, bool *out_got_handshake, uint8_t *buf, int len, int peek); int ssl3_read_change_cipher_spec(SSL *ssl); void ssl3_read_close_notify(SSL *ssl); int ssl3_read_handshake_bytes(SSL *ssl, uint8_t *buf, int len); int ssl3_write_app_data(SSL *ssl, bool *out_needs_handshake, const uint8_t *buf, int len); int ssl3_output_cert_chain(SSL *ssl); int ssl3_new(SSL *ssl); void ssl3_free(SSL *ssl); int ssl3_init_message(SSL *ssl, CBB *cbb, CBB *body, uint8_t type); int ssl3_finish_message(SSL *ssl, CBB *cbb, Array *out_msg); int ssl3_add_message(SSL *ssl, Array msg); int ssl3_add_change_cipher_spec(SSL *ssl); int ssl3_add_alert(SSL *ssl, uint8_t level, uint8_t desc); int ssl3_flush_flight(SSL *ssl); int dtls1_init_message(SSL *ssl, CBB *cbb, CBB *body, uint8_t type); int dtls1_finish_message(SSL *ssl, CBB *cbb, Array *out_msg); int dtls1_add_message(SSL *ssl, Array msg); int dtls1_add_change_cipher_spec(SSL *ssl); int dtls1_add_alert(SSL *ssl, uint8_t level, uint8_t desc); int dtls1_flush_flight(SSL *ssl); // ssl_add_message_cbb finishes the handshake message in |cbb| and adds it to // the pending flight. It returns one on success and zero on error. int ssl_add_message_cbb(SSL *ssl, CBB *cbb); // ssl_hash_message incorporates |msg| into the handshake hash. It returns one // on success and zero on allocation failure. bool ssl_hash_message(SSL_HANDSHAKE *hs, const SSLMessage &msg); // dtls1_get_record reads a new input record. On success, it places it in // |ssl->s3->rrec| and returns one. Otherwise it returns <= 0 on error or if // more data is needed. int dtls1_get_record(SSL *ssl); int dtls1_read_app_data(SSL *ssl, bool *out_got_handshake, uint8_t *buf, int len, int peek); int dtls1_read_change_cipher_spec(SSL *ssl); void dtls1_read_close_notify(SSL *ssl); int dtls1_write_app_data(SSL *ssl, bool *out_needs_handshake, const uint8_t *buf, int len); // dtls1_write_record sends a record. It returns one on success and <= 0 on // error. int dtls1_write_record(SSL *ssl, int type, const uint8_t *buf, size_t len, enum dtls1_use_epoch_t use_epoch); int dtls1_send_finished(SSL *ssl, int a, int b, const char *sender, int slen); int dtls1_retransmit_outgoing_messages(SSL *ssl); void dtls1_clear_record_buffer(SSL *ssl); int dtls1_parse_fragment(CBS *cbs, struct hm_header_st *out_hdr, CBS *out_body); int dtls1_check_timeout_num(SSL *ssl); int dtls1_handshake_write(SSL *ssl); void dtls1_start_timer(SSL *ssl); void dtls1_stop_timer(SSL *ssl); int dtls1_is_timer_expired(SSL *ssl); unsigned int dtls1_min_mtu(void); int dtls1_new(SSL *ssl); int dtls1_accept(SSL *ssl); int dtls1_connect(SSL *ssl); void dtls1_free(SSL *ssl); bool dtls1_get_message(SSL *ssl, SSLMessage *out); int dtls1_read_message(SSL *ssl); void dtls1_next_message(SSL *ssl); int dtls1_dispatch_alert(SSL *ssl); int tls1_change_cipher_state(SSL_HANDSHAKE *hs, evp_aead_direction_t direction); int tls1_generate_master_secret(SSL_HANDSHAKE *hs, uint8_t *out, const uint8_t *premaster, size_t premaster_len); // tls1_get_grouplist returns the locally-configured group preference list. Span tls1_get_grouplist(const SSL *ssl); // tls1_check_group_id returns one if |group_id| is consistent with // locally-configured group preferences. int tls1_check_group_id(const SSL *ssl, uint16_t group_id); // tls1_get_shared_group sets |*out_group_id| to the first preferred shared // group between client and server preferences and returns one. If none may be // found, it returns zero. int tls1_get_shared_group(SSL_HANDSHAKE *hs, uint16_t *out_group_id); // tls1_set_curves converts the array of |ncurves| NIDs pointed to by |curves| // into a newly allocated array of TLS group IDs. On success, the function // returns one and writes the array to |*out_group_ids| and its size to // |*out_group_ids_len|. Otherwise, it returns zero. int tls1_set_curves(uint16_t **out_group_ids, size_t *out_group_ids_len, const int *curves, size_t ncurves); // tls1_set_curves_list converts the string of curves pointed to by |curves| // into a newly allocated array of TLS group IDs. On success, the function // returns one and writes the array to |*out_group_ids| and its size to // |*out_group_ids_len|. Otherwise, it returns zero. int tls1_set_curves_list(uint16_t **out_group_ids, size_t *out_group_ids_len, const char *curves); // ssl_add_clienthello_tlsext writes ClientHello extensions to |out|. It // returns one on success and zero on failure. The |header_len| argument is the // length of the ClientHello written so far and is used to compute the padding // length. (It does not include the record header.) int ssl_add_clienthello_tlsext(SSL_HANDSHAKE *hs, CBB *out, size_t header_len); int ssl_add_serverhello_tlsext(SSL_HANDSHAKE *hs, CBB *out); int ssl_parse_clienthello_tlsext(SSL_HANDSHAKE *hs, const SSL_CLIENT_HELLO *client_hello); int ssl_parse_serverhello_tlsext(SSL_HANDSHAKE *hs, CBS *cbs); #define tlsext_tick_md EVP_sha256 // ssl_process_ticket processes a session ticket from the client. It returns // one of: // |ssl_ticket_aead_success|: |*out_session| is set to the parsed session and // |*out_renew_ticket| is set to whether the ticket should be renewed. // |ssl_ticket_aead_ignore_ticket|: |*out_renew_ticket| is set to whether a // fresh ticket should be sent, but the given ticket cannot be used. // |ssl_ticket_aead_retry|: the ticket could not be immediately decrypted. // Retry later. // |ssl_ticket_aead_error|: an error occured that is fatal to the connection. enum ssl_ticket_aead_result_t ssl_process_ticket( SSL *ssl, UniquePtr *out_session, bool *out_renew_ticket, const uint8_t *ticket, size_t ticket_len, const uint8_t *session_id, size_t session_id_len); // tls1_verify_channel_id processes |msg| as a Channel ID message, and verifies // the signature. If the key is valid, it saves the Channel ID and returns // one. Otherwise, it returns zero. int tls1_verify_channel_id(SSL_HANDSHAKE *hs, const SSLMessage &msg); // tls1_write_channel_id generates a Channel ID message and puts the output in // |cbb|. |ssl->tlsext_channel_id_private| must already be set before calling. // This function returns one on success and zero on error. int tls1_write_channel_id(SSL_HANDSHAKE *hs, CBB *cbb); // tls1_channel_id_hash computes the hash to be signed by Channel ID and writes // it to |out|, which must contain at least |EVP_MAX_MD_SIZE| bytes. It returns // one on success and zero on failure. int tls1_channel_id_hash(SSL_HANDSHAKE *hs, uint8_t *out, size_t *out_len); int tls1_record_handshake_hashes_for_channel_id(SSL_HANDSHAKE *hs); // ssl_do_channel_id_callback checks runs |ssl->ctx->channel_id_cb| if // necessary. It returns one on success and zero on fatal error. Note that, on // success, |ssl->tlsext_channel_id_private| may be unset, in which case the // operation should be retried later. int ssl_do_channel_id_callback(SSL *ssl); // ssl3_can_false_start returns one if |ssl| is allowed to False Start and zero // otherwise. int ssl3_can_false_start(const SSL *ssl); // ssl_can_write returns one if |ssl| is allowed to write and zero otherwise. int ssl_can_write(const SSL *ssl); // ssl_can_read returns one if |ssl| is allowed to read and zero otherwise. int ssl_can_read(const SSL *ssl); void ssl_get_current_time(const SSL *ssl, struct OPENSSL_timeval *out_clock); void ssl_ctx_get_current_time(const SSL_CTX *ctx, struct OPENSSL_timeval *out_clock); // ssl_reset_error_state resets state for |SSL_get_error|. void ssl_reset_error_state(SSL *ssl); } // namespace bssl // Opaque C types. // // The following types are exported to C code as public typedefs, so they must // be defined outside of the namespace. // ssl_method_st backs the public |SSL_METHOD| type. It is a compatibility // structure to support the legacy version-locked methods. struct ssl_method_st { // version, if non-zero, is the only protocol version acceptable to an // SSL_CTX initialized from this method. uint16_t version; // method is the underlying SSL_PROTOCOL_METHOD that initializes the // SSL_CTX. const SSL_PROTOCOL_METHOD *method; // x509_method contains pointers to functions that might deal with |X509| // compatibility, or might be a no-op, depending on the application. const SSL_X509_METHOD *x509_method; }; // ssl_protocol_method_st, aka |SSL_PROTOCOL_METHOD| abstracts between TLS and // DTLS. struct ssl_protocol_method_st { // is_dtls is one if the protocol is DTLS and zero otherwise. char is_dtls; int (*ssl_new)(SSL *ssl); void (*ssl_free)(SSL *ssl); // get_message sets |*out| to the current handshake message and returns true // if one has been received. It returns false if more input is needed. bool (*get_message)(SSL *ssl, bssl::SSLMessage *out); // read_message reads additional handshake data for |get_message|. On success, // it returns one. Otherwise, it returns <= 0. int (*read_message)(SSL *ssl); // next_message is called to release the current handshake message. void (*next_message)(SSL *ssl); // read_app_data reads up to |len| bytes of application data into |buf|. On // success, it returns the number of bytes read. Otherwise, it returns <= 0 // and sets |*out_got_handshake| to whether the failure was due to a // post-handshake handshake message. If so, any handshake messages consumed // may be read with |get_message|. int (*read_app_data)(SSL *ssl, bool *out_got_handshake, uint8_t *buf, int len, int peek); int (*read_change_cipher_spec)(SSL *ssl); void (*read_close_notify)(SSL *ssl); int (*write_app_data)(SSL *ssl, bool *out_needs_handshake, const uint8_t *buf, int len); int (*dispatch_alert)(SSL *ssl); // supports_cipher returns one if |cipher| is supported by this protocol and // zero otherwise. int (*supports_cipher)(const SSL_CIPHER *cipher); // init_message begins a new handshake message of type |type|. |cbb| is the // root CBB to be passed into |finish_message|. |*body| is set to a child CBB // the caller should write to. It returns one on success and zero on error. int (*init_message)(SSL *ssl, CBB *cbb, CBB *body, uint8_t type); // finish_message finishes a handshake message. It sets |*out_msg| to the // serialized message. It returns one on success and zero on error. int (*finish_message)(SSL *ssl, CBB *cbb, bssl::Array *out_msg); // add_message adds a handshake message to the pending flight. It returns one // on success and zero on error. int (*add_message)(SSL *ssl, bssl::Array msg); // add_change_cipher_spec adds a ChangeCipherSpec record to the pending // flight. It returns one on success and zero on error. int (*add_change_cipher_spec)(SSL *ssl); // add_alert adds an alert to the pending flight. It returns one on success // and zero on error. int (*add_alert)(SSL *ssl, uint8_t level, uint8_t desc); // flush_flight flushes the pending flight to the transport. It returns one on // success and <= 0 on error. int (*flush_flight)(SSL *ssl); // on_handshake_complete is called when the handshake is complete. void (*on_handshake_complete)(SSL *ssl); // set_read_state sets |ssl|'s read cipher state to |aead_ctx|. It returns // one on success and zero if changing the read state is forbidden at this // point. int (*set_read_state)(SSL *ssl, bssl::UniquePtr aead_ctx); // set_write_state sets |ssl|'s write cipher state to |aead_ctx|. It returns // one on success and zero if changing the write state is forbidden at this // point. int (*set_write_state)(SSL *ssl, bssl::UniquePtr aead_ctx); }; struct ssl_x509_method_st { // check_client_CA_list returns one if |names| is a good list of X.509 // distinguished names and zero otherwise. This is used to ensure that we can // reject unparsable values at handshake time when using crypto/x509. int (*check_client_CA_list)(STACK_OF(CRYPTO_BUFFER) *names); // cert_clear frees and NULLs all X509 certificate-related state. void (*cert_clear)(CERT *cert); // cert_free frees all X509-related state. void (*cert_free)(CERT *cert); // cert_flush_cached_chain drops any cached |X509|-based certificate chain // from |cert|. // cert_dup duplicates any needed fields from |cert| to |new_cert|. void (*cert_dup)(CERT *new_cert, const CERT *cert); void (*cert_flush_cached_chain)(CERT *cert); // cert_flush_cached_chain drops any cached |X509|-based leaf certificate // from |cert|. void (*cert_flush_cached_leaf)(CERT *cert); // session_cache_objects fills out |sess->x509_peer| and |sess->x509_chain| // from |sess->certs| and erases |sess->x509_chain_without_leaf|. It returns // one on success or zero on error. int (*session_cache_objects)(SSL_SESSION *session); // session_dup duplicates any needed fields from |session| to |new_session|. // It returns one on success or zero on error. int (*session_dup)(SSL_SESSION *new_session, const SSL_SESSION *session); // session_clear frees any X509-related state from |session|. void (*session_clear)(SSL_SESSION *session); // session_verify_cert_chain verifies the certificate chain in |session|, // sets |session->verify_result| and returns one on success or zero on // error. int (*session_verify_cert_chain)(SSL_SESSION *session, SSL *ssl, uint8_t *out_alert); // hs_flush_cached_ca_names drops any cached |X509_NAME|s from |hs|. void (*hs_flush_cached_ca_names)(bssl::SSL_HANDSHAKE *hs); // ssl_new does any neccessary initialisation of |ssl|. It returns one on // success or zero on error. int (*ssl_new)(SSL *ssl); // ssl_free frees anything created by |ssl_new|. void (*ssl_free)(SSL *ssl); // ssl_flush_cached_client_CA drops any cached |X509_NAME|s from |ssl|. void (*ssl_flush_cached_client_CA)(SSL *ssl); // ssl_auto_chain_if_needed runs the deprecated auto-chaining logic if // necessary. On success, it updates |ssl|'s certificate configuration as // needed and returns one. Otherwise, it returns zero. int (*ssl_auto_chain_if_needed)(SSL *ssl); // ssl_ctx_new does any neccessary initialisation of |ctx|. It returns one on // success or zero on error. int (*ssl_ctx_new)(SSL_CTX *ctx); // ssl_ctx_free frees anything created by |ssl_ctx_new|. void (*ssl_ctx_free)(SSL_CTX *ctx); // ssl_ctx_flush_cached_client_CA drops any cached |X509_NAME|s from |ctx|. void (*ssl_ctx_flush_cached_client_CA)(SSL_CTX *ssl); }; // ssl_st backs the public |SSL| type. It subclasses the true type so that // SSLConnection may be a C++ type with methods and destructor without // polluting the global namespace. struct ssl_st : public bssl::SSLConnection {}; struct cert_st : public bssl::SSLCertConfig {}; #endif // OPENSSL_HEADER_SSL_INTERNAL_H