Move the actual SSL_AEAD_CTX swap into the record layer. Also revise the
intermediate state we store between setup_key_block and
change_cipher_state. With SSL_AEAD_CTX_new abstracted out, keeping the
EVP_AEAD around doesn't make much sense. Just store enough to partition
the key block.
Change-Id: I773fb46a2cb78fa570f00c0a89339c15bbb1d719
Reviewed-on: https://boringssl-review.googlesource.com/6832
Reviewed-by: Adam Langley <alangley@gmail.com>
This is a minor regression from
https://boringssl-review.googlesource.com/5235.
If the client, for whatever reason, had an ID-based session but also
supports tickets, it will send non-empty ID + empty ticket extension.
If the ticket extension is non-empty, then the ID is not an ID but a
dummy signaling value, so 5235 avoided looking it up. But if it is
present and empty, the ID is still an ID and should be looked up.
This shouldn't have any practical consequences, except if a server
switched from not supporting tickets and then started supporting it,
while keeping the session cache fixed.
Add a test for this case, and tighten up existing ID vs ticket tests so
they fail if we resume with the wrong type.
Change-Id: Id4d08cd809af00af30a2b67fe3a971078e404c75
Reviewed-on: https://boringssl-review.googlesource.com/6554
Reviewed-by: Adam Langley <alangley@gmail.com>
That we're half and half is really confusing.
Change-Id: I1c2632682e8a3e63d01dada8e0eb3b735ff709ce
Reviewed-on: https://boringssl-review.googlesource.com/6785
Reviewed-by: Adam Langley <agl@google.com>
This unifies the ClientKeyExchange code rather nicely. ServerKeyExchange
is still pretty specialized. For simplicity, I've extended the yaSSL bug
workaround for clients as well as servers rather than route in a
boolean.
Chrome's already banished DHE to a fallback with intention to remove
altogether later, and the spec doesn't say anything useful about
ClientDiffieHellmanPublic encoding, so this is unlikely to cause
problems.
Change-Id: I0355cd1fd0fab5729e8812e4427dd689124f53a2
Reviewed-on: https://boringssl-review.googlesource.com/6784
Reviewed-by: Adam Langley <agl@google.com>
The new curve is not enabled by default.
As EC_GROUP/EC_POINT is a bit too complex for X25519, this introduces an
SSL_ECDH_METHOD abstraction which wraps just the raw ECDH operation. It
also tidies up some of the curve code which kept converting back and
force between NIDs and curve IDs. Now everything transits as curve IDs
except for API entry points (SSL_set1_curves) which take NIDs. Those
convert immediately and act on curve IDs from then on.
Note that, like the Go implementation, this slightly tweaks the order of
operations. The client sees the server public key before sending its
own. To keep the abstraction simple, SSL_ECDH_METHOD expects to
generate a keypair before consuming the peer's public key. Instead, the
client handshake stashes the serialized peer public value and defers
parsing it until it comes time to send ClientKeyExchange. (This is
analogous to what it was doing before where it stashed the parsed peer
public value instead.)
It still uses TLS 1.2 terminology everywhere, but this abstraction should also
be compatible with TLS 1.3 which unifies (EC)DH-style key exchanges.
(Accordingly, this abstraction intentionally does not handle parsing the
ClientKeyExchange/ServerKeyExchange framing or attempt to handle asynchronous
plain RSA or the authentication bits.)
BUG=571231
Change-Id: Iba09dddee5bcdfeb2b70185308e8ab0632717932
Reviewed-on: https://boringssl-review.googlesource.com/6780
Reviewed-by: Adam Langley <agl@google.com>
clang-format keeps getting annoyed at it. Also remove some long-dead
constants.
Change-Id: I61e773f5be1e60ca28f1ea085e3afa7cb2c97b9e
Reviewed-on: https://boringssl-review.googlesource.com/6778
Reviewed-by: Adam Langley <agl@google.com>
In doing so, make the asynchronous portion look more like
ssl3_send_server_key_exchange. This is a considerably simpler structure,
so the save/resume doesn't need any state.
Mostly this means writing out the signature algorithm can now go through
CBB rather than a uint8_t* without bounds check.
Change-Id: If99fcffd0d41a84514c3d23034062c582f1bccb2
Reviewed-on: https://boringssl-review.googlesource.com/6771
Reviewed-by: Adam Langley <agl@google.com>
There is some messiness around saving and restoring the CBB, but this is
still significantly clearer.
Note that the BUF_MEM_grow line is gone in favor of a fixed CBB like the
other functions ported thus far. This line was never necessary as
init_buf is initialized to 16k and none of our key exchanges get that
large. (The largest one can get is DHE_RSA. Even so, it'd take a roughly
30k-bit DH group with a 30k-bit RSA key.)
Having such limits and tight assumptions on init_buf's initial size is
poor (but on par for the old code which usually just blindly assumed the
message would not get too large) and the size of the certificate chain
is much less obviously bounded, so those BUF_MEM_grows can't easily go.
My current plan is convert everything but those which legitimately need
BUF_MEM_grow to CBB, then atomically convert the rest, remove init_buf,
and switch everything to non-fixed CBBs. This will hopefully also
simplify async resumption. In the meantime, having a story for
resumption means the future atomic change is smaller and, more
importantly, relieves some complexity budget in the ServerKeyExchange
code for adding Curve25519.
Change-Id: I1de6af9856caaed353453d92a502ba461a938fbd
Reviewed-on: https://boringssl-review.googlesource.com/6770
Reviewed-by: Adam Langley <agl@google.com>
This relieves some complexity budget for adding Curve25519 to this
code.
This also adds a BN_bn2cbb_padded helper function since this seems to be a
fairly common need.
Change-Id: Ied0066fdaec9d02659abd6eb1a13f33502c9e198
Reviewed-on: https://boringssl-review.googlesource.com/6767
Reviewed-by: Adam Langley <agl@google.com>
Only ECDHE-based ciphers are implemented. To ease the transition, the
pre-standard cipher shares a name with the standard one. The cipher rule parser
is hacked up to match the name to both ciphers. From the perspective of the
cipher suite configuration language, there is only one cipher.
This does mean it is impossible to disable the old variant without a code
change, but this situation will be very short-lived, so this is fine.
Also take this opportunity to make the CK and TXT names align with convention.
Change-Id: Ie819819c55bce8ff58e533f1dbc8bef5af955c21
Reviewed-on: https://boringssl-review.googlesource.com/6686
Reviewed-by: Adam Langley <agl@google.com>
This uses ssl3_read_bytes for now. We still need to dismantle that
function and then invert the handshake state machine, but this gets
things closer to the right shape as an intermediate step and is a large
chunk in itself. It simplifies a lot of the CCS/handshake
synchronization as a lot of the invariants much more clearly follow from
the handshake itself.
Tests need to be adjusted since this changes some error codes. Now all
the CCS/Handshake checks fall through to the usual
SSL_R_UNEXPECTED_RECORD codepath. Most of what used to be a special-case
falls out naturally. (If half of Finished was in the same record as the
pre-CCS message, that part of the handshake record would have been left
unconsumed, so read_change_cipher_spec would have noticed, just like
read_app_data would have noticed.)
Change-Id: I15c7501afe523d5062f0e24a3b65f053008d87be
Reviewed-on: https://boringssl-review.googlesource.com/6642
Reviewed-by: Adam Langley <agl@google.com>
Then deprecate the old functions. Thanks to upstream's
6977e8ee4a718a76351ba5275a9f0be4e530eab5 for the idea.
Change-Id: I916abd6fca2a3b2a439ec9902d9779707f7e41eb
Reviewed-on: https://boringssl-review.googlesource.com/6622
Reviewed-by: Adam Langley <agl@google.com>
It has no callers. I prepped for its removal earlier with
c05697c2c5
and then completely forgot.
Thanks to upstream's 6f78b9e824c053d062188578635c575017b587c5 for
the reminder. Quoth them:
> This only gets used to set a specific curve without actually checking
> that the peer supports it or not and can therefor result in handshake
> failures that can be avoided by selecting a different cipher.
It's also a very confusing API since it does NOT pass ownership of the
EC_KEY to the caller.
Change-Id: I6a00643b3a2d6746e9e0e228b47c2bc9694b0084
Reviewed-on: https://boringssl-review.googlesource.com/6621
Reviewed-by: Adam Langley <agl@google.com>
FIPS is the same as HIGH (but for CHACHA20), so those are redundant.
Likewise, MEDIUM vs HIGH was just RC4. Remove those in favor of
redefining those legacy rules to mean this.
One less field to keep track of in each cipher.
Change-Id: I2b2489cffb9e16efb0ac7d7290c173cac061432a
Reviewed-on: https://boringssl-review.googlesource.com/6515
Reviewed-by: Adam Langley <agl@google.com>
It's redundant with other cipher properties. We can express these in code.
Cipher rule matching gets a little bit complicated due to the confusing legacy
protocol version cipher rules, so add some tests for it. (It's really hard to
grep for uses of them, so I've kept them working to be safe.)
Change-Id: Ic6b3fcd55d76d4a51b31bf7ae629a2da50a7450e
Reviewed-on: https://boringssl-review.googlesource.com/6453
Reviewed-by: Adam Langley <agl@google.com>
The keylog BIO is internally synchronized by the SSL_CTX lock, but an
application may wish to log keys from multiple SSL_CTXs. This is in
preparation for switching Chromium to use a separate SSL_CTX per profile
to more naturally split up the session caches.
It will also be useful for routing up SSLKEYLOGFILE in WebRTC. There,
each log line must be converted to an IPC up from the renderer
processes.
This will require changes in Chromium when we roll BoringSSL.
BUG=458365,webrtc:4417
Change-Id: I2945bdb4def0a9c36e751eab3d5b06c330d66b54
Reviewed-on: https://boringssl-review.googlesource.com/6514
Reviewed-by: Adam Langley <agl@google.com>
TLS resets it in t1_enc.c while DTLS has it sprinkled everywhere.
Change-Id: I78f0f0e646b4dc82a1058199c4b00f2e917aa5bc
Reviewed-on: https://boringssl-review.googlesource.com/6511
Reviewed-by: Adam Langley <agl@google.com>
This exposes the ServerKeyExchange signature hash type used in the most recent
handshake, for histogramming on the client.
BUG=549662
Change-Id: I8a4e00ac735b1ecd2c2df824112c3a0bc62332a7
Reviewed-on: https://boringssl-review.googlesource.com/6413
Reviewed-by: Adam Langley <agl@google.com>
Later when TLS 1.3 comes around, we'll need SSL_CIPHER_get_max_version too. In
the meantime, hide the SSL_TLSV1_2 messiness behind a reasonable API.
Change-Id: Ibcc17cccf48dd99e364d6defdfa5a87d031ecf0a
Reviewed-on: https://boringssl-review.googlesource.com/6452
Reviewed-by: Adam Langley <agl@google.com>
They run through completely different logic as only handshake is fragmented.
This'll make it easier to rewrite the handshake logic in a follow-up.
Change-Id: I9515feafc06bf069b261073873966e72fcbe13cb
Reviewed-on: https://boringssl-review.googlesource.com/6420
Reviewed-by: Adam Langley <agl@google.com>
That function doesn't do anything useful for DTLS. It's meant for tracking the
rest of the record we've already committed to by writing half of one. But one
cannot write half a datagram, so DTLS never tracks this. Just call
ssl_write_buffer_flush straight and don't touch wpend_*.
Change-Id: Ibe191907d64c955c7cfeefba26f5c11ad5e4b939
Reviewed-on: https://boringssl-review.googlesource.com/6418
Reviewed-by: Adam Langley <agl@google.com>
This change reduces unnecessary copying and makes the pre-RFC-7539
nonces 96 bits just like the AES-GCM, AES-CCM, and RFC 7539
ChaCha20-Poly1305 cipher suites. Also, all the symbols related to
the pre-RFC-7539 cipher suites now have "_OLD" appended, in
preparation for adding the RFC 7539 variants.
Change-Id: I1f85bd825b383c3134df0b6214266069ded029ae
Reviewed-on: https://boringssl-review.googlesource.com/6103
Reviewed-by: Adam Langley <alangley@gmail.com>
The internal session cache is keyed on session ID, so this is completely
useless for clients (indeed we never look it up internally). Along the way,
tidy up ssl_update_cache to be more readable. The slight behavior change is
that SSL_CTX_add_session's return code no longer controls the external
callback. It's not clear to me what that could have accomplished. (It can only
fail on allocation error. We only call it for new sessions, so the duplicate
case is impossible.)
The one thing of value the internal cache might have provided is managing the
timeout. The SSL_CTX_flush_sessions logic would flip the not_resumable bit and
cause us not to offer expired sessions (modulo SSL_CTX_flush_sessions's delay
and any discrepancies between the two caches). Instead, just check expiration
when deciding whether or not to offer a session.
This way clients that set SSL_SESS_CACHE_CLIENT blindly don't accidentally
consume gobs of memory.
BUG=531194
Change-Id: If97485beab21874f37737edc44df24e61ce23705
Reviewed-on: https://boringssl-review.googlesource.com/6321
Reviewed-by: Adam Langley <alangley@gmail.com>
A random 32-byte (so 256-bit) session ID is never going to collide with
an existing one. (And, if it does, SSL_CTX_add_session does account for
this, so the server won't explode. Just attempting to resume some
session will fail.)
That logic didn't completely work anyway as it didn't account for
external session caches or multiple connections picking the same ID in
parallel (generation and insertion happen at different times) or
multiple servers sharing one cache. In theory one could fix this by
passing in a sufficiently clever generate_session_id, but no one does
that.
I found no callers of these functions, so just remove them altogether.
Change-Id: I8500c592cf4676de6d7194d611b99e9e76f150a7
Reviewed-on: https://boringssl-review.googlesource.com/6318
Reviewed-by: Adam Langley <alangley@gmail.com>
In doing so, simplify the mess around serializing the public key.
Channel ID specifies that you write x and y concatenated. Rather than
using the X9.62 serialization and chopping bits off, get the affine
coordinates and write them out in the same way we write r and s.
Also unify the P-256 sanity check around SSL_set1_tls_channel_id and
actually check the curve NID.
BUG=468889
Change-Id: I228877b736c9722e368d315064ce3ae6893adfc0
Reviewed-on: https://boringssl-review.googlesource.com/6201
Reviewed-by: Adam Langley <alangley@gmail.com>
Start converting the ones we can right now. Some of the messier ones
resize init_buf rather than assume the initial size is sufficient, so
those will probably wait until init_buf is gone and the handshake's
undergone some more invasive surgery. The async ones will also require
some thought. But some can be incrementally converted now.
BUG=468889
Change-Id: I0bc22e4dca37d9d671a488c42eba864c51933638
Reviewed-on: https://boringssl-review.googlesource.com/6190
Reviewed-by: Adam Langley <alangley@gmail.com>
RSA_PSK is really weird in that it takes a Certificate, but you're not
expected to verify it. It's just a funny way to transmit an RSA key.
(They probably should have used the RSA_EXPORT ServerKeyExchange
spelling.) Some code now already doesn't account for it right around
certificate verification.
Given ECDHE_PSK exists, hopefully there will never be any need to add
this.
Change-Id: Ia64dac28099eaa9021f8d915d45ccbfd62872317
Reviewed-on: https://boringssl-review.googlesource.com/5941
Reviewed-by: Adam Langley <agl@google.com>
Allow configuring digest preferences for the private key. Some
smartcards have limited support for signing digests, notably Windows
CAPI keys and old Estonian smartcards. Chromium used the supports_digest
hook in SSL_PRIVATE_KEY_METHOD to limit such keys to SHA1. However,
detecting those keys was a heuristic, so some SHA256-capable keys
authenticating to SHA256-only servers regressed in the switch to
BoringSSL. Replace this mechanism with an API to configure digest
preference order. This way heuristically-detected SHA1-only keys may be
configured by Chromium as SHA1-preferring rather than SHA1-requiring.
In doing so, clean up the shared_sigalgs machinery somewhat.
BUG=468076
Change-Id: I996a2df213ae4d8b4062f0ab85b15262ca26f3c6
Reviewed-on: https://boringssl-review.googlesource.com/5755
Reviewed-by: Adam Langley <agl@google.com>
EVP_MD_CTX_copy_ex was implemented with a memcpy, which doesn't work well when
some of the pointers need to be copied, and ssl_verify_cert_chain didn't
account for set_ex_data failing.
Change-Id: Ieb556aeda6ab2e4c810f27012fefb1e65f860023
Reviewed-on: https://boringssl-review.googlesource.com/5911
Reviewed-by: Adam Langley <agl@google.com>
Applications may require the stapled OCSP response in order to verify
the certificate within the verification callback.
Change-Id: I8002e527f90c3ce7b6a66e3203c0a68371aac5ec
Reviewed-on: https://boringssl-review.googlesource.com/5730
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
Move cert_chain to the SSL_SESSION. Now everything on an SSL_SESSION is
properly serialized. The cert_chain field is, unfortunately, messed up
since it means different things between client and server.
There exists code which calls SSL_get_peer_cert_chain as both client and
server and assumes the existing semantics for each. Since that function
doesn't return a newly-allocated STACK_OF(X509), normalizing between the
two formats is a nuisance (we'd either need to store both cert_chain and
cert_chain_full on the SSL_SESSION or create one of the two variants
on-demand and stash it into the SSL).
This CL does not resolve this and retains the client/server difference
in SSL_SESSION. The SSL_SESSION serialization is a little inefficient
(two copies of the leaf certificate) for a client, but clients don't
typically serialize sessions. Should we wish to resolve it in the
future, we can use a different tag number. Because this was historically
unserialized, existing code must already allow for cert_chain not being
preserved across i2d/d2i.
In keeping with the semantics of retain_only_sha256_of_client_certs,
cert_chain is not retained when that flag is set.
Change-Id: Ieb72fc62c3076dd59750219e550902f1ad039651
Reviewed-on: https://boringssl-review.googlesource.com/5759
Reviewed-by: Adam Langley <agl@google.com>
It's completely redundant with the copy in the SSL_SESSION except it
isn't serialized.
Change-Id: I1d95a14cae064c599e4bab576df1dd156da4b81c
Reviewed-on: https://boringssl-review.googlesource.com/5757
Reviewed-by: Adam Langley <agl@google.com>
Gets another field out of the SSL_SESSION.
Change-Id: I9a27255533f8e43e152808427466ec1306cfcc60
Reviewed-on: https://boringssl-review.googlesource.com/5756
Reviewed-by: Adam Langley <agl@google.com>
This begins decoupling the transport from the SSL state machine. The buffering
logic is hidden behind an opaque API. Fields like ssl->packet and
ssl->packet_length are gone.
ssl3_get_record and dtls1_get_record now call low-level tls_open_record and
dtls_open_record functions that unpack a single record independent of who owns
the buffer. Both may be called in-place. This removes ssl->rstate which was
redundant with the buffer length.
Future work will push the buffer up the stack until it is above the handshake.
Then we can expose SSL_open and SSL_seal APIs which act like *_open_record but
return a slightly larger enum due to other events being possible. Likewise the
handshake state machine will be detached from its buffer. The existing
SSL_read, SSL_write, etc., APIs will be implemented on top of SSL_open, etc.,
combined with ssl_read_buffer_* and ssl_write_buffer_*. (Which is why
ssl_read_buffer_extend still tries to abstract between TLS's and DTLS's fairly
different needs.)
The new buffering logic does not support read-ahead (removed previously) since
it lacks a memmove on ssl_read_buffer_discard for TLS, but this could be added
if desired. The old buffering logic wasn't quite right anyway; it tried to
avoid the memmove in some cases and could get stuck too far into the buffer and
not accept records. (The only time the memmove is optional is in DTLS or if
enough of the record header is available to know that the entire next record
would fit in the buffer.)
The new logic also now actually decrypts the ciphertext in-place again, rather
than almost in-place when there's an explicit nonce/IV. (That accidentally
switched in https://boringssl-review.googlesource.com/#/c/4792/; see
3d59e04bce96474099ba76786a2337e99ae14505.)
BUG=468889
Change-Id: I403c1626253c46897f47c7ae93aeab1064b767b2
Reviewed-on: https://boringssl-review.googlesource.com/5715
Reviewed-by: Adam Langley <agl@google.com>
This is a simpler implementation than OpenSSL's, lacking responder IDs
and request extensions support. This mirrors the client implementation
already present.
Change-Id: I54592b60e0a708bfb003d491c9250401403c9e69
Reviewed-on: https://boringssl-review.googlesource.com/5700
Reviewed-by: Adam Langley <agl@google.com>
They're not called (new in 1.0.2). We actually may well need to
configure these later to strike ECDSA from the list on Chrome/XP
depending on what TLS 1.3 does, but for now striking it from the cipher
suite list is both necessary and sufficient. I think we're better off
removing these for now and adding new APIs later if we need them.
(This API is weird. You pass in an array of NIDs that must be even
length and alternating between hash and signature NID. We'd also need a
way to query the configured set of sigalgs to filter away. Those used to
exist but were removed in
https://boringssl-review.googlesource.com/#/c/5347/. SSL_get_sigalgs is
an even uglier API and doesn't act on the SSL_CTX.)
And with that, SSL_ctrl and SSL_CTX_ctrl can *finally* be dropped. Don't
leave no-op wrappers; anything calling SSL_ctrl and SSL_CTX_ctrl should
instead switch to the wrapper macros.
BUG=404754
Change-Id: I5d465cd27eef30d108eeb6de075330c9ef5c05e8
Reviewed-on: https://boringssl-review.googlesource.com/5675
Reviewed-by: Adam Langley <agl@google.com>
This change stores the size of the group/modulus (for RSA/DHE) or curve
ID (for ECDHE) in the |SSL_SESSION|. This makes it available for UIs
where desired.
Change-Id: I354141da432a08f71704c9683f298b361362483d
Reviewed-on: https://boringssl-review.googlesource.com/5280
Reviewed-by: Adam Langley <agl@google.com>
This isn't called and, with the fixed-DH client cert types removed, is
only useful if a server wishes to not accept ECDSA certificates or
something.
BUG=404754
Change-Id: I21d8e1a71aedf446ce974fbeadc62f311ae086db
Reviewed-on: https://boringssl-review.googlesource.com/5673
Reviewed-by: Adam Langley <agl@google.com>
These are unused (new as of 1.0.2). Although being able to separate the
two stores is a reasonable thing to do, we hope to remove the
auto-chaining feature eventually. Given that, SSL_CTX_set_cert_store
should suffice. This gets rid of two more ctrl macros.
BUG=404754,486295
Change-Id: Id84de95d7b2ad5a14fc68a62bb2394f01fa67bb4
Reviewed-on: https://boringssl-review.googlesource.com/5672
Reviewed-by: Adam Langley <agl@google.com>
Rather than support arbitrarily many handshake hashes in the general
case (which the PRF logic assumes is capped at two), special-case the
MD5/SHA1 two-hash combination and otherwise maintain a single rolling
hash.
Change-Id: Ide9475565b158f6839bb10b8b22f324f89399f92
Reviewed-on: https://boringssl-review.googlesource.com/5618
Reviewed-by: Adam Langley <agl@google.com>
Rather than iterate over handshake_dgsts itself, it can just call
tls1_handshake_digest.
Change-Id: Ia518da540e47e65b13367eb1af184c0885908488
Reviewed-on: https://boringssl-review.googlesource.com/5617
Reviewed-by: Adam Langley <agl@google.com>
The handshake hash is initialized from the buffer as soon as the cipher
is known. When adding a message to the transcript, independently update
the buffer and rolling hash, whichever is active. This avoids the
complications around dont_free_handshake_buffer and EMS.
BUG=492371
Change-Id: I3b1065796a50fd1be5d42ead7210c2f253ef0aca
Reviewed-on: https://boringssl-review.googlesource.com/5615
Reviewed-by: Adam Langley <agl@google.com>
It's purely the PRF function now, although it's still different from the
rest due to the _DEFAULT field being weird.
Change-Id: Iaea7a99cccdc8be4cd60f6c1503df5be2a63c4c5
Reviewed-on: https://boringssl-review.googlesource.com/5614
Reviewed-by: Adam Langley <agl@google.com>
It's a property of just algorithm_enc and hopefully AES-GCM will
continue to be the only true AEAD that requires this. Simpler to just
keep it in ssl_aead_ctx.c.
Change-Id: Ib7c060a3de2fa8590b2dc36c23a5d5fabff43b07
Reviewed-on: https://boringssl-review.googlesource.com/5613
Reviewed-by: Adam Langley <agl@google.com>
Take the sequence number as a parameter. Also replace satsub64be with
the boring thing: convert to uint64_t and subtract normally.
BUG=468889
Change-Id: Icab75f872b5e55cf4e9d68b66934ec91afeb198b
Reviewed-on: https://boringssl-review.googlesource.com/5558
Reviewed-by: Adam Langley <agl@google.com>
The RSA key exchange needs decryption and is still unsupported.
Change-Id: I8c13b74e25a5424356afbe6e97b5f700a56de41f
Reviewed-on: https://boringssl-review.googlesource.com/5467
Reviewed-by: Adam Langley <agl@google.com>
This change mirrors upstream's custom extension API because we have some
internal users that depend on it.
Change-Id: I408e442de0a55df7b05c872c953ff048cd406513
Reviewed-on: https://boringssl-review.googlesource.com/5471
Reviewed-by: Adam Langley <agl@google.com>
This is unused. It seems to be distinct from the automatic chain
building and was added in 1.0.2. Seems to be an awful lot of machinery
that consumers ought to configure anyway.
BUG=486295
Change-Id: If3d4a2761f61c5b2252b37d4692089112fc0ec21
Reviewed-on: https://boringssl-review.googlesource.com/5353
Reviewed-by: Adam Langley <agl@google.com>
This allows us to remove the confusing EVP_PKEY argument to the
SSL_PRIVATE_KEY_METHOD wrapper functions. It also simplifies some of the
book-keeping around the CERT structure, as well as the API for
configuring certificates themselves. The current one is a little odd as
some functions automatically route to the slot while others affect the
most recently touched slot. Others still (extra_certs) apply to all
slots, making them not terribly useful.
Consumers with complex needs should use cert_cb or the early callback
(select_certificate_cb) to configure whatever they like based on the
ClientHello.
BUG=486295
Change-Id: Ice29ffeb867fa4959898b70dfc50fc00137f01f3
Reviewed-on: https://boringssl-review.googlesource.com/5351
Reviewed-by: Adam Langley <agl@google.com>
The distinction was not well-enforced in the code. In fact, it wasn't
even possible to use the RSA_SIGN slot because ssl_set_pkey and
ssl_set_cert would always use the RSA_ENC slot.
A follow-up will fold away the mechanism altogether, but this is an easy
initial simplfication.
BUG=486295
Change-Id: I66b5bf3e6dc243dac7c75924c1c1983538e49060
Reviewed-on: https://boringssl-review.googlesource.com/5349
Reviewed-by: Adam Langley <agl@google.com>
There's no need to store more than the TLS values.
Change-Id: I1a93c7c6aa3254caf7cc09969da52713e6f8acf4
Reviewed-on: https://boringssl-review.googlesource.com/5348
Reviewed-by: Adam Langley <agl@google.com>
After the custom key method support, the EVP_PKEY parameter is somewhat
confusing (to be resolved with the certificate slots removal) as it must
always refer to a private key. ssl3_cert_verify_hash is sometimes used
with the peer's public key. If custom keys were supported on the server,
this would break.
Fix this by passing a pkey_type parameter and letting the caller decide
whether this uses SSL_PRIVATE_KEY_METHOD or not.
Change-Id: I673b92579a84b4561f28026ec0b1c78a6bfee440
Reviewed-on: https://boringssl-review.googlesource.com/5341
Reviewed-by: Adam Langley <agl@google.com>
Missed that there were two of them.
Change-Id: Ibab169ef1f75be9c5ad1ffa0f232629e76a4512d
Reviewed-on: https://boringssl-review.googlesource.com/5332
Reviewed-by: Adam Langley <agl@google.com>
It (incorrectly) thinks some variables are uninitialized. It also gets confused
about some const parameters.
Change-Id: Ie2b3a5336692e7293cf03d6a4cd5345d30b628b3
Reviewed-on: https://boringssl-review.googlesource.com/5330
Reviewed-by: Adam Langley <agl@google.com>
Use more sensible variable names. Also move some work between the helpers and
s3_srvr.c a little; the session lookup functions now only return a new session.
Whether to send a ticket is now an additional output to avoid the enum
explosion around renewal. The actual SSL state is not modified.
This is somewhat cleaner as s3_srvr.c may still reject a session for other
reasons, so we avoid setting ssl->session and ssl->verify_result to a session
that wouldn't be used. (They get fixed up in ssl_get_new_session, so it didn't
actually matter.)
Change-Id: Ib52fabbe993b5e2b7408395a02cdea3dee66df7b
Reviewed-on: https://boringssl-review.googlesource.com/5235
Reviewed-by: Adam Langley <agl@google.com>
This change also switches the behaviour of the client. Previously the
client would send the SCSV rather than the extension, but now it'll only
do that for SSLv3 connections.
Change-Id: I67a04b8abbef2234747c0dac450458deb6b0cd0a
Reviewed-on: https://boringssl-review.googlesource.com/5143
Reviewed-by: Adam Langley <agl@google.com>
This adds a new API, SSL_set_private_key_method, which allows the consumer to
customize private key operations. For simplicity, it is incompatible with the
multiple slots feature (which will hopefully go away) but does not, for now,
break it.
The new method is only routed up for the client for now. The server will
require a decrypt hook as well for the plain RSA key exchange.
BUG=347404
Change-Id: I35d69095c29134c34c2af88c613ad557d6957614
Reviewed-on: https://boringssl-review.googlesource.com/5049
Reviewed-by: Adam Langley <agl@google.com>
Turns out the safer/simpler method still wasn't quite right. :-)
session->sess_cert isn't serialized and deserialized, which is poor. Duplicate
it manually for now. Leave a TODO to get rid of that field altogether as it's
not especially helpful. The certificate-related fields should be in the
session. The others probably have no reason to be preserved on resumptions at
all.
Test by making bssl_shim.cc assert the peer cert chain is there or not as
expected.
BUG=501220
Change-Id: I44034167629720d6e2b7b0b938d58bcab3ab0abe
Reviewed-on: https://boringssl-review.googlesource.com/5170
Reviewed-by: Adam Langley <agl@google.com>
Most of the logic was redundant with checks already made in
ssl3_get_server_certificate. The DHE check was missing an ECDHE half
(and was impossible). The ECDSA check allowed an ECDSA certificate for
RSA. The only non-redundant check was a key usage check which,
strangely, is only done for ECDSA ciphers.
(Although this function called X509_certificate_type and checked sign
bits, those bits in X509_certificate_type are purely a function of the
key type and don't do anything.)
Change-Id: I8df7eccc0ffff49e4cfd778bd91058eb253b13cb
Reviewed-on: https://boringssl-review.googlesource.com/5047
Reviewed-by: Adam Langley <agl@google.com>
This doesn't even change behavior. Unlike local configuration, the peer
can never have multiple certificates anyway. (Even with a renego, the
SESS_CERT is created anew.)
This does lose the implicit certificate type check, but the certificate
type is already checked in ssl3_get_server_certificate and later checked
post-facto in ssl3_check_cert_and_algorithm (except that one seems to
have some bugs like it accepts ECDSA certificates for RSA cipher suites,
to be cleaned up in a follow-up). Either way, we have the certificate
mismatch tests for this.
BUG=486295
Change-Id: I437bb723bb310ad54ee4150eda67c1cfe43377b3
Reviewed-on: https://boringssl-review.googlesource.com/5044
Reviewed-by: Adam Langley <agl@google.com>
With SSL2 gone, there's no need for this split between the abstract
cipher framework and ciphers. Put the cipher suite table in ssl_cipher.c
and move other SSL_CIPHER logic there. With that gone, prune the
cipher-related hooks in SSL_PROTOCOL_METHOD.
BUG=468889
Change-Id: I48579de8bc4c0ea52781ba1b7b57bc5b4919d21c
Reviewed-on: https://boringssl-review.googlesource.com/4961
Reviewed-by: Adam Langley <agl@google.com>
They're redundant with each other.
Change-Id: I17e7ff8c4e0b1486986dd866fd99673fa2aaa494
Reviewed-on: https://boringssl-review.googlesource.com/4959
Reviewed-by: Adam Langley <agl@google.com>
All ciphers are implemented by an EVP_AEAD.
Change-Id: Ifa754599a34e16bf97e1a4b84a271c6d45462c7c
Reviewed-on: https://boringssl-review.googlesource.com/4958
Reviewed-by: Adam Langley <agl@google.com>
The ctrl hooks are left alone since they should just go away.
Simplifying the cipher story will happen in the next CL.
BUG=468889
Change-Id: I979971c90f59c55cd5d17554f1253158b114f18b
Reviewed-on: https://boringssl-review.googlesource.com/4957
Reviewed-by: Adam Langley <agl@google.com>
This still needs significant work, especially the close_notify half, but
clarify the interface and get *_read_bytes out of SSL_PROTOCOL_METHOD.
read_bytes is an implementation detail of those two and get_message
rather than both an implementation detail of get_message for handshake
and a (wholly inappropriate) exposed interface for the other two.
BUG=468889
Change-Id: I7dd23869e0b7c3532ceb2e9dd31ca25ea31128e7
Reviewed-on: https://boringssl-review.googlesource.com/4956
Reviewed-by: Adam Langley <agl@google.com>
The SSL_PROTOCOL_METHOD table needs work, but this makes it clearer
exactly what the shared interface between the upper later and TLS/DTLS
is.
BUG=468889
Change-Id: I38931c484aa4ab3f77964d708d38bfd349fac293
Reviewed-on: https://boringssl-review.googlesource.com/4955
Reviewed-by: Adam Langley <agl@google.com>
Never send the time as a client. Always send it as a server.
Change-Id: I20c55078cfe199d53dc002f6ee5dd57060b086d5
Reviewed-on: https://boringssl-review.googlesource.com/4829
Reviewed-by: Adam Langley <agl@google.com>
When the peer or caller requests a renegotiation, OpenSSL doesn't
renegotiate immediately. It sets a flag to begin a renegotiation as soon
as record-layer read and write buffers are clear. One reason is that
OpenSSL's record layer cannot write a handshake record while an
application data record is being written. The buffer consistency checks
around partial writes will break.
None of these cases are relevant for the client auth hack. We already
require that renego come in at a quiescent part of the application
protocol by forbidding handshake/app_data interleave.
The new behavior is now: when a HelloRequest comes in, if the record
layer is not idle, the renegotiation is rejected as if
SSL_set_reject_peer_renegotiations were set. Otherwise we immediately
begin the new handshake. The server may not send any application data
between HelloRequest and completing the handshake. The HelloRequest may
not be consumed if an SSL_write is pending.
Note this does require that Chromium's HTTP stack not attempt to read
the HTTP response until the request has been written, but the
renegotiation logic already assumes it. Were Chromium to drive the
SSL_read state machine early and the server, say, sent a HelloRequest
after reading the request headers but before we've sent the whole POST
body, the SSL state machine may racily enter renegotiate early, block
writing the POST body on the new handshake, which would break Chromium's
ERR_SSL_CLIENT_AUTH_CERT_NEEDED plumbing.
BUG=429450
Change-Id: I6278240c3bceb5d2e1a2195bdb62dd9e0f4df718
Reviewed-on: https://boringssl-review.googlesource.com/4825
Reviewed-by: Adam Langley <agl@google.com>
The only case where renego is supported is if we are a client and the
server sends a HelloRequest. That is still needed to support the renego
+ client auth hack in Chrome. Beyond that, no other forms of renego will
work.
The messy logic where the handshake loop is repurposed to send
HelloRequest and the extremely confusing tri-state s->renegotiate (which
makes SSL_renegotiate_pending a lie during the initial handshake as a
server) are now gone. The next change will further simplify things by
removing ssl->s3->renegotiate and the renego deferral logic. There's
also some server-only renegotiation checks that can go now.
Also clean up ssl3_read_bytes' HelloRequest handling. The old logic relied on
the handshake state machine to reject bad HelloRequests which... actually that
code probably lets you initiate renego by sending the first four bytes of a
ServerHello and expecting the peer to read it later.
BUG=429450
Change-Id: Ie0f87d0c2b94e13811fe8e22e810ab2ffc8efa6c
Reviewed-on: https://boringssl-review.googlesource.com/4824
Reviewed-by: Adam Langley <agl@google.com>
This is considerably less scary than swapping out connection state. It also
fixes a minor bug where, if dtls1_do_write had an alert to dispatch and we
happened to retry during a rexmit, it would use the wrong epoch.
BUG=468889
Change-Id: I754b0d46bfd02f797f4c3f7cfde28d3e5f30c52b
Reviewed-on: https://boringssl-review.googlesource.com/4793
Reviewed-by: Adam Langley <agl@google.com>
tls1_enc is now SSL_AEAD_CTX_{open,seal}. This starts tidying up a bit
of the record-layer logic. This removes rr->input, as encrypting and
decrypting records no longer refers to various globals. It also removes
wrec altogether. SSL3_RECORD is now only used to maintain state about
the current incoming record. Outgoing records go straight to the write
buffer.
This also removes the outgoing alignment memcpy and simply calls
SSL_AEAD_CTX_seal with the parameters as appropriate. From bssl speed
tests, this seems to be faster on non-ARM and a bit of a wash on ARM.
Later it may be worth recasting these open/seal functions to write into
a CBB (tweaked so it can be malloc-averse), but for now they take an
out/out_len/max_out trio like their EVP_AEAD counterparts.
BUG=468889
Change-Id: Ie9266a818cc053f695d35ef611fd74c5d4def6c3
Reviewed-on: https://boringssl-review.googlesource.com/4792
Reviewed-by: Adam Langley <agl@google.com>
Chromium's session cache has since been rewritten and no longer needs to
muck with those functions in tests.
Change-Id: I2defad81513210dca5e105757e04cbb677583251
Reviewed-on: https://boringssl-review.googlesource.com/4788
Reviewed-by: Adam Langley <agl@google.com>
SSL_get_current_cipher is documented by upstream to return the cipher actually
being used. However, because it reads s->session, it returns information
pertaining to the session to be offered if queried before ServerHello or early
in an abbreviated handshake.
Logic around s->session needs more comprehensive cleanup but for just this
function, defining it to be the current outgoing cipher is close to the current
semantics but for fixing the initial state (s->session->cipher is populated
when sending CCS). Store it in the SSL_AEAD_CTX which seems a natural place to
associate state pertaining to a connection half.
BUG=484744
Change-Id: Ife8db27a16615d0dbb2aec65359537243e08af7c
Reviewed-on: https://boringssl-review.googlesource.com/4733
Reviewed-by: Adam Langley <agl@google.com>
Nothing should call ssl3_setup_read_buffer or ssl3_setup_write_buffer unless it
intends to write into the buffer. This way buffer management can later be an
implementation detail of the record layer.
Change-Id: Idb0effba00e77c6169764843793f40ec37868b61
Reviewed-on: https://boringssl-review.googlesource.com/4687
Reviewed-by: Adam Langley <agl@google.com>
It's completely redundant with the extend bit. If extend is 0, we're reading a
new record, and rbuf.len is passed. Then it needs to get clamped by ssl3_read_n
post alignment anyway. If extend is 1, we're reading the rest of the current
record and max is always n. (For TLS, we actually could just read more, but not
for DTLS. Basically no one sets it on the TLS side of things, so instead, after
WebRTC's broken DTLS handling is fixed, read_ahead can go away altogether and
DTLS/TLS record layers can be separated.)
This removes ssl3_read_n's callers' dependency on ssl3_setup_read_buffer
setting up rbuf.len.
Change-Id: Iaf11535d01017507a52a33b19240f42984d6cf52
Reviewed-on: https://boringssl-review.googlesource.com/4686
Reviewed-by: Adam Langley <agl@google.com>
With DTLSv1_get_timeout de-ctrl-ified, the type checker complains about
OPENSSL_timeval. Existing callers all use the real timeval.
Now that OPENSSL_timeval is not included in any public structs, simply
forward-declare timeval itself in ssl.h and pull in winsock2.h in internal
headers.
Change-Id: Ieaf110e141578488048c28cdadb14881301a2ce1
Reviewed-on: https://boringssl-review.googlesource.com/4682
Reviewed-by: Adam Langley <agl@google.com>
Nothing ever uses those structs. This to avoid having any structs in the
public header which use struct timeval.
In doing so, move the protocol version constants up to ssl.h so dtls1.h
may be empty. This also removes TLS1_get_version and TLS1_get_client_version
as they're unused and depend on TLS1_VERSION_MAJOR. This still lets tls1.h
be included independently from ssl.h (though I don't think anyone ever includes
it...).
Change-Id: Ieac8b90cf94f7f1e742a88bb75c0ee0aa4b1414c
Reviewed-on: https://boringssl-review.googlesource.com/4681
Reviewed-by: Adam Langley <agl@google.com>
With SSL_get0_raw_cipherlist gone, there's no need to hold onto it.
Change-Id: I258f8bfe21cc354211a777660df680df6c49df2a
Reviewed-on: https://boringssl-review.googlesource.com/4616
Reviewed-by: Adam Langley <agl@google.com>
The only place using it is export keying material which can do the
version check inline.
Change-Id: I1893966c130aa43fa97a6116d91bb8b04f80c6fb
Reviewed-on: https://boringssl-review.googlesource.com/4615
Reviewed-by: Adam Langley <agl@google.com>
clang-format got a little confused there.
Change-Id: I46df523e8a7813a2b4e243da3df22851b3393873
Reviewed-on: https://boringssl-review.googlesource.com/4614
Reviewed-by: Adam Langley <agl@google.com>
Document them while I'm here. This adds a new 'preprocessor
compatibility section' to avoid breaking #ifdefs. The CTRL values
themselves are defined to 'doesnt_exist' to catch anything calling
SSL_ctrl directly until that function can be unexported completely.
BUG=404754
Change-Id: Ia157490ea8efe0215d4079556a0c7643273e7601
Reviewed-on: https://boringssl-review.googlesource.com/4553
Reviewed-by: Adam Langley <agl@google.com>
These are never used and no flags are defined anyway.
Change-Id: I206dc2838c5f68d87559a702dcb299b208cc7e1e
Reviewed-on: https://boringssl-review.googlesource.com/4493
Reviewed-by: Adam Langley <agl@google.com>
This is a really dumb API wart. Now that we have a limited set of curves that
are all reasonable, the automatic logic should just always kick in. This makes
set_ecdh_auto a no-op and, instead of making it the first choice, uses it as
the fallback behavior should none of the older curve selection APIs be used.
Currently, by default, server sockets can only use the plain RSA key exchange.
BUG=481139
Change-Id: Iaabc82de766cd00968844a71aaac29bd59841cd4
Reviewed-on: https://boringssl-review.googlesource.com/4531
Reviewed-by: Adam Langley <agl@google.com>
Just about everything depends on SSL_CIPHER. Move it to the top as the first
section in ssl.h. Match the header order and the source file order and document
everything. Also make a couple of minor style guide tweaks.
Change-Id: I6a810dbe79238278ac480e5ced1447055715a79f
Reviewed-on: https://boringssl-review.googlesource.com/4290
Reviewed-by: Adam Langley <agl@google.com>
Rather than shoehorn real ciphers and cipher aliases into the same type (that's
what cipher->valid is used for), treat them separately. Make
ssl_cipher_apply_rule match ciphers by cipher_id (the parameter was ignored and
we assumed that masks uniquely identify a cipher) and remove the special cases
around zero for all the masks. This requires us to remember which fields
default to 0 and which default to ~0u, but the logic is much clearer.
Finally, now that ciphers and cipher aliases are different, don't process rules
which sum together an actual cipher with cipher aliases. This would AND
together the masks for the alias with the values in the cipher and do something
weird around alg_ssl. (alg_ssl is just weird in general, as everyone trying to
disable SSLv3 in OpenSSL recently discovered.)
With all that, we can finally remove cipher->valid which was always one.
Change-Id: Iefcfe159bd6c22dbaea3a5f1517bd82f756dcfe1
Reviewed-on: https://boringssl-review.googlesource.com/4284
Reviewed-by: Adam Langley <agl@google.com>
