We still need BN_mul and, in particular, bn_mul_recursive will either
require bn_abs_sub_words be generalized or that we add a parallel
bn_abs_sub_part_words, but start with the easy one.
While I'm here, simplify the i and j mess in here. It's patterned after
the multiplication one, but can be much simpler.
Bug: 234
Change-Id: If936099d53304f2512262a1cbffb6c28ae30ccee
Reviewed-on: https://boringssl-review.googlesource.com/25325
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
This has no behavior change, but it has a semantic one. This CL is an
assertion that all BIGNUM functions tolerate non-minimal BIGNUMs now.
Specifically:
- Functions that do not touch top/width are assumed to not care.
- Functions that do touch top/width will be changed by this CL. These
should be checked in review that they tolerate non-minimal BIGNUMs.
Subsequent CLs will start adjusting the widths that BIGNUM functions
output, to fix timing leaks.
Bug: 232
Change-Id: I3a2b41b071f2174452f8d3801bce5c78947bb8f7
Reviewed-on: https://boringssl-review.googlesource.com/25257
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
The fiat-crypto-generated code uses the Montgomery form implementation
strategy, for both 32-bit and 64-bit code.
64-bit throughput seems slower, but the difference is smaller than noise between repetitions (-2%?)
32-bit throughput has decreased significantly for ECDH (-40%). I am
attributing this to the change from varibale-time scalar multiplication
to constant-time scalar multiplication. Due to the same bottleneck,
ECDSA verification still uses the old code (otherwise there would have
been a 60% throughput decrease). On the other hand, ECDSA signing
throughput has increased slightly (+10%), perhaps due to the use of a
precomputed table of multiples of the base point.
64-bit benchmarks (Google Cloud Haswell):
with this change:
Did 9126 ECDH P-256 operations in 1009572us (9039.5 ops/sec)
Did 23000 ECDSA P-256 signing operations in 1039832us (22119.0 ops/sec)
Did 8820 ECDSA P-256 verify operations in 1024242us (8611.2 ops/sec)
master (40e8c921ca):
Did 9340 ECDH P-256 operations in 1017975us (9175.1 ops/sec)
Did 23000 ECDSA P-256 signing operations in 1039820us (22119.2 ops/sec)
Did 8688 ECDSA P-256 verify operations in 1021108us (8508.4 ops/sec)
benchmarks on ARMv7 (LG Nexus 4):
with this change:
Did 150 ECDH P-256 operations in 1029726us (145.7 ops/sec)
Did 506 ECDSA P-256 signing operations in 1065192us (475.0 ops/sec)
Did 363 ECDSA P-256 verify operations in 1033298us (351.3 ops/sec)
master (2fce1beda0):
Did 245 ECDH P-256 operations in 1017518us (240.8 ops/sec)
Did 473 ECDSA P-256 signing operations in 1086281us (435.4 ops/sec)
Did 360 ECDSA P-256 verify operations in 1003846us (358.6 ops/sec)
64-bit tables converted as follows:
import re, sys, math
p = 2**256 - 2**224 + 2**192 + 2**96 - 1
R = 2**256
def convert(t):
x0, s1, x1, s2, x2, s3, x3 = t.groups()
v = int(x0, 0) + 2**64 * (int(x1, 0) + 2**64*(int(x2,0) + 2**64*(int(x3, 0)) ))
w = v*R%p
y0 = hex(w%(2**64))
y1 = hex((w>>64)%(2**64))
y2 = hex((w>>(2*64))%(2**64))
y3 = hex((w>>(3*64))%(2**64))
ww = int(y0, 0) + 2**64 * (int(y1, 0) + 2**64*(int(y2,0) + 2**64*(int(y3, 0)) ))
if ww != v*R%p:
print(x0,x1,x2,x3)
print(hex(v))
print(y0,y1,y2,y3)
print(hex(w))
print(hex(ww))
assert 0
return '{'+y0+s1+y1+s2+y2+s3+y3+'}'
fe_re = re.compile('{'+r'(\s*,\s*)'.join(r'(\d+|0x[abcdefABCDEF0123456789]+)' for i in range(4)) + '}')
print (re.sub(fe_re, convert, sys.stdin.read()).rstrip('\n'))
32-bit tables converted from 64-bit tables
Change-Id: I52d6e5504fcb6ca2e8b0ee13727f4500c80c1799
Reviewed-on: https://boringssl-review.googlesource.com/23244
Commit-Queue: Adam Langley <agl@google.com>
Reviewed-by: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Along the way, this allows us to tidy up the invariants associated with
EC_SCALAR. They were fuzzy around ec_point_mul_scalar and some
computations starting from the digest in ECDSA. The latter I've put into
the type system with EC_LOOSE_SCALAR.
As for the former, Andres points out that particular EC implementations
are only good for scalars within a certain range, otherwise you may need
extra work to avoid the doubling case. To simplify curve
implementations, we reduce them fully rather than do the looser bit size
check, so they can have the stronger precondition to work with.
Change-Id: Iff9a0404f89adf8f7f914f8e8246c9f3136453f1
Reviewed-on: https://boringssl-review.googlesource.com/23664
Commit-Queue: Adam Langley <agl@google.com>
Reviewed-by: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This is only a hair faster than the signing change, but still something.
I kept the call to BN_mod_inverse_odd as that appears to be faster
(constant time is not a concern for verification).
Before:
Did 22855 ECDSA P-224 verify operations in 3015099us (7580.2 ops/sec)
Did 21276 ECDSA P-256 verify operations in 3083284us (6900.4 ops/sec)
Did 2635 ECDSA P-384 verify operations in 3032582us (868.9 ops/sec)
Did 1240 ECDSA P-521 verify operations in 3068631us (404.1 ops/sec)
After:
Did 23310 ECDSA P-224 verify operations in 3056226us (7627.1 ops/sec)
Did 21210 ECDSA P-256 verify operations in 3035765us (6986.7 ops/sec)
Did 2666 ECDSA P-384 verify operations in 3023592us (881.7 ops/sec)
Did 1209 ECDSA P-521 verify operations in 3054040us (395.9 ops/sec)
Change-Id: Iec995b1a959dbc83049d0f05bdc525c14a95c28e
Reviewed-on: https://boringssl-review.googlesource.com/23077
Reviewed-by: Adam Langley <agl@google.com>
Hasse's theorem implies at most one subtraction is necessary. This is
still using BIGNUM for now because field elements
(EC_POINT_get_affine_coordinates_GFp) are BIGNUMs.
This gives an additional 2% speedup for signing.
Before:
Did 16000 ECDSA P-224 signing operations in 1064799us (15026.3 ops/sec)
Did 19000 ECDSA P-256 signing operations in 1007839us (18852.2 ops/sec)
Did 1078 ECDSA P-384 signing operations in 1079413us (998.7 ops/sec)
Did 484 ECDSA P-521 signing operations in 1083616us (446.7 ops/sec)
After:
Did 16000 ECDSA P-224 signing operations in 1054918us (15167.1 ops/sec)
Did 20000 ECDSA P-256 signing operations in 1037338us (19280.1 ops/sec)
Did 1045 ECDSA P-384 signing operations in 1049073us (996.1 ops/sec)
Did 484 ECDSA P-521 signing operations in 1085492us (445.9 ops/sec)
Change-Id: I2bfe214f968eca7a8e317928c0f3daf1a14bca90
Reviewed-on: https://boringssl-review.googlesource.com/23076
Reviewed-by: Adam Langley <agl@google.com>
None of the asymmetric crypto we inherented from OpenSSL is
constant-time because of BIGNUM. BIGNUM chops leading zeros off the
front of everything, so we end up leaking information about the first
word, in theory. BIGNUM functions additionally tend to take the full
range of inputs and then call into BN_nnmod at various points.
All our secret values should be acted on in constant-time, but k in
ECDSA is a particularly sensitive value. So, ecdsa_sign_setup, in an
attempt to mitigate the BIGNUM leaks, would add a couple copies of the
order.
This does not work at all. k is used to compute two values: k^-1 and kG.
The first operation when computing k^-1 is to call BN_nnmod if k is out
of range. The entry point to our tuned constant-time curve
implementations is to call BN_nnmod if the scalar has too many bits,
which this causes. The result is both corrections are immediately undone
but cause us to do more variable-time work in the meantime.
Replace all these computations around k with the word-based functions
added in the various preceding CLs. In doing so, replace the BN_mod_mul
calls (which internally call BN_nnmod) with Montgomery reduction. We can
avoid taking k^-1 out of Montgomery form, which combines nicely with
Brian Smith's trick in 3426d10119. Along
the way, we avoid some unnecessary mallocs.
BIGNUM still affects the private key itself, as well as the EC_POINTs.
But this should hopefully be much better now. Also it's 10% faster:
Before:
Did 15000 ECDSA P-224 signing operations in 1069117us (14030.3 ops/sec)
Did 18000 ECDSA P-256 signing operations in 1053908us (17079.3 ops/sec)
Did 1078 ECDSA P-384 signing operations in 1087853us (990.9 ops/sec)
Did 473 ECDSA P-521 signing operations in 1069835us (442.1 ops/sec)
After:
Did 16000 ECDSA P-224 signing operations in 1064799us (15026.3 ops/sec)
Did 19000 ECDSA P-256 signing operations in 1007839us (18852.2 ops/sec)
Did 1078 ECDSA P-384 signing operations in 1079413us (998.7 ops/sec)
Did 484 ECDSA P-521 signing operations in 1083616us (446.7 ops/sec)
Change-Id: I2a25e90fc99dac13c0616d0ea45e125a4bd8cca1
Reviewed-on: https://boringssl-review.googlesource.com/23075
Reviewed-by: Adam Langley <agl@google.com>
These allow precomputation of k, but bypass our nonce hardening and also
make it harder to excise BIGNUM. As a bonus, ECDSATest.SignTestVectors
is now actually covering the k^-1 and r computations.
Change-Id: I4c71dae162874a88a182387ac43999be9559ddd7
Reviewed-on: https://boringssl-review.googlesource.com/23074
Reviewed-by: Adam Langley <agl@google.com>
wpa_supplicant appear to be using these.
Change-Id: I1f220cae69162901bcd9452e8daf67379c5e276c
Reviewed-on: https://boringssl-review.googlesource.com/23324
Reviewed-by: Steven Valdez <svaldez@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
I still need to revive the original CL, but right now I'm interested in
giving every EC_GROUP an order_mont and having different ownership of
that field between built-in and custom groups is kind of a nuisance. If
I'm going to do that anyway, better to avoid computing the entire
EC_GROUP in one go.
I'm using some manual locking rather than CRYPTO_once here so that it
behaves well in the face of malloc errors. Not that we especially care,
but it was easy to do.
This speeds up our ECDH benchmark a bit which otherwise must construct the
EC_GROUP each time (matching real world usage).
Before:
Did 7619 ECDH P-224 operations in 1003190us (7594.8 ops/sec)
Did 7518 ECDH P-256 operations in 1060844us (7086.8 ops/sec)
Did 572 ECDH P-384 operations in 1055878us (541.7 ops/sec)
Did 264 ECDH P-521 operations in 1062375us (248.5 ops/sec)
After:
Did 8415 ECDH P-224 operations in 1066695us (7888.9 ops/sec)
Did 7952 ECDH P-256 operations in 1022819us (7774.6 ops/sec)
Did 572 ECDH P-384 operations in 1055817us (541.8 ops/sec)
Did 264 ECDH P-521 operations in 1060008us (249.1 ops/sec)
Bug: 20
Change-Id: I7446cd0a69a840551dcc2dfabadde8ee1e3ff3e2
Reviewed-on: https://boringssl-review.googlesource.com/23073
Reviewed-by: Adam Langley <agl@google.com>
We don't currently have test coverage for the order_mont bits (or lack
thereof) for custom curves.
Change-Id: I865d547c783226a5a3d3d203e10b0e59bad36984
Reviewed-on: https://boringssl-review.googlesource.com/23064
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
We capitalize things Go-style.
Change-Id: Id002efb8a85e4e1886164421bba059d9ca425964
Reviewed-on: https://boringssl-review.googlesource.com/22885
Commit-Queue: David Benjamin <davidben@google.com>
Reviewed-by: Adam Langley <agl@google.com>
BN_generate_dsa_nonce will never generate a zero value of k.
Change-Id: I06964b815bc82aa678ffbc80664f9d788cf3851d
Reviewed-on: https://boringssl-review.googlesource.com/22884
Commit-Queue: David Benjamin <davidben@google.com>
Commit-Queue: Adam Langley <agl@google.com>
Reviewed-by: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
crypto/{asn1,x509,x509v3,pem} were skipped as they are still OpenSSL
style.
Change-Id: I3cd9a60e1cb483a981aca325041f3fbce294247c
Reviewed-on: https://boringssl-review.googlesource.com/19504
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
It's confusing to have both mont and mont_data on EC_GROUP. The
documentation was also wrong.
Change-Id: I4e2e3169ed79307018212fba51d015bbbe5c4227
Reviewed-on: https://boringssl-review.googlesource.com/10348
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Change-Id: I8512c6bfb62f1a83afc8f763d681bf5db3b4ceae
Reviewed-on: https://boringssl-review.googlesource.com/17144
Commit-Queue: Adam Langley <alangley@gmail.com>
Reviewed-by: David Benjamin <davidben@google.com>
BUG=129
Change-Id: Ia8b0639489fea817be4bb24f0457629f0fd6a815
Reviewed-on: https://boringssl-review.googlesource.com/16947
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This avoids depending the FIPS module on crypto/bytestring and moves
ECDSA_SIG_{new,free} into the module.
Change-Id: I7b45ef07f1140873a0da300501141b6ae272a5d9
Reviewed-on: https://boringssl-review.googlesource.com/15984
Reviewed-by: Adam Langley <agl@google.com>
The names in the P-224 code collided with the P-256 code and thus many
of the functions and constants in the P-224 code have been prefixed.
Change-Id: I6bcd304640c539d0483d129d5eaf1702894929a8
Reviewed-on: https://boringssl-review.googlesource.com/15847
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
