We'd previously been assuming we'd want to predict P-256 and X25519 but,
on reflection, that's nonsense. Although, today, P-256 is widespread and
X25519 is less so, that's not the right question to ask. Those servers
are all 1.2.
The right question is whether we believe enough servers will get to TLS
1.3 before X25519 to justify wasting 64 bytes on all other connections.
Given that OpenSSL has already shipped X25519 and Microsoft was doing
interop testing on X25519 around when we were shipping it, I think the
answer is no.
Moreover, if we are wrong, it will be easier to go from predicting one
group to two rather than the inverse (provided we send a fake one with
GREASE). I anticipate prediction-miss HelloRetryRequest logic across the
TLS/TCP ecosystem will be largely untested (no one wants to pay an RTT),
so taking a group out of the predicted set will likely be a risky
operation.
Only predicting one group also makes things a bit simpler. I haven't
done this here, but we'll be able to fold the 1.2 and 1.3 ecdh_ctx's
together, even.
Change-Id: Ie7e42d3105aca48eb9d97e2e05a16c5379aa66a3
Reviewed-on: https://boringssl-review.googlesource.com/10960
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This is in preparation for using the supported_versions extension to
experiment with draft TLS 1.3 versions, since we don't wish to restore
the fallback. With versions begin opaque values, we will want
version_from_wire to reject unknown values, not attempt to preserve
order in some way.
This means ClientHello.version processing needs to be separate code.
That's just written out fully in negotiate_version now. It also means
SSL_set_{min,max}_version will notice invalid inputs which aligns us
better with upstream's versions of those APIs.
This CL doesn't replace ssl->version with an internal-representation
version, though follow work should do it once a couple of changes land
in consumers.
BUG=90
Change-Id: Id2f5e1fa72847c823ee7f082e9e69f55e51ce9da
Reviewed-on: https://boringssl-review.googlesource.com/11122
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This will make it a little easier to store the normalized version rather
than the wire version. Also document the V2ClientHello behavior.
Change-Id: I5ce9ccce44ca48be2e60ddf293c0fab6bba1356e
Reviewed-on: https://boringssl-review.googlesource.com/11121
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
One less field to reset on renego and save a pointer of post-handshake
memory.
Change-Id: Ifc0c3c73072af244ee3848d9a798988d2c8a7c38
Reviewed-on: https://boringssl-review.googlesource.com/11086
Reviewed-by: Adam Langley <agl@google.com>
This isn't hugely important since the hs object will actually be
released at the end of the handshake, but no sense in holding on to them
longer than needed.
Also release |public_key| when we no longer need it and document what
the fields mean.
Change-Id: If677cb4a915c75405dabe7135205630527afd8bc
Reviewed-on: https://boringssl-review.googlesource.com/10360
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This withdraws support for -DBORINGSSL_ENABLE_RC4_TLS, and removes the
RC4 AEADs.
Change-Id: I1321b76bfe047d180743fa46d1b81c5d70c64e81
Reviewed-on: https://boringssl-review.googlesource.com/10940
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Reason for revert: Right now in TLS 1.3, certificate_auth is exactly
the same as whether we're doing resumption. With the weird reauth
stuff punted to later in the spec, having extra state is just more
room for bugs to creep in.
Original issue's description:
> Determining certificate_auth and key_exchange based on SSL.
>
> This allows us to switch TLS 1.3 to use non-cipher based negotiation
> without needing to use separate functions between 1.3 and below.
>
> BUG=77
>
> Change-Id: I9207e7a6793cb69e8300e2c15afe3548cbf82af2
> Reviewed-on: https://boringssl-review.googlesource.com/10803
> Reviewed-by: David Benjamin <davidben@google.com>
> Commit-Queue: David Benjamin <davidben@google.com>
> CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
>
Change-Id: I240e3ee959ffd1f2481a06eabece3af554d20ffa
Reviewed-on: https://boringssl-review.googlesource.com/11008
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This allows us to switch TLS 1.3 to use non-cipher based negotiation
without needing to use separate functions between 1.3 and below.
BUG=77
Change-Id: I9207e7a6793cb69e8300e2c15afe3548cbf82af2
Reviewed-on: https://boringssl-review.googlesource.com/10803
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
peer_sigalgs should live on SSL_HANDSHAKE. This both releases a little
bit of memory after the handshake is over and also avoids the bug where
the sigalgs get dropped if SSL_set_SSL_CTX is called at a bad time. See
also upstream's 14e14bf6964965d02ce89805d9de867f000095aa.
This only affects consumers using the old SNI callback and not
select_certificate_cb.
Add a test that the SNI callback works as expected. In doing so, add an
SSL_CTX version of the signing preferences API. This is a property of
the cert/key pair (really just the key) and should be tied to that. This
makes it a bit easier to have the regression test work with TLS 1.2 too.
I thought we'd fixed this already, but apparently not... :-/
BUG=95
Change-Id: I75b02fad4059e6aa46c3b05183a07d72880711b3
Reviewed-on: https://boringssl-review.googlesource.com/10445
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Change-Id: Ie60744761f5aa434a71a998f5ca98a8f8b1c25d5
Reviewed-on: https://boringssl-review.googlesource.com/10447
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Having two copies of this is confusing. This field is inherently tied to
the certificate chain, which lives on SSL_SESSION, so this should live
there too. This also wasn't getting reset correctly on SSL_clear, but
this is now resolved.
Change-Id: I22b1734a93320bb0bf0dc31faa74d77a8e1de906
Reviewed-on: https://boringssl-review.googlesource.com/10283
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
One less thing to keep track of.
https://github.com/tlswg/tls13-spec/pull/549 got merged.
Change-Id: Ide66e547140f8122a3b8013281be5215c11b6de0
Reviewed-on: https://boringssl-review.googlesource.com/10482
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: Steven Valdez <svaldez@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
BUG=75
Change-Id: Ied864cfccbc0e68d71c55c5ab563da27b7253463
Reviewed-on: https://boringssl-review.googlesource.com/9043
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Now that ssl_bytes_to_cipher_list is uninteresting, it can be an
implementation detail of ssl3_choose_cipher. This removes a tiny amount
of duplicated TLS 1.2 / TLS 1.3 code.
Change-Id: I116a6bb08bbc43da573d4b7b5626c556e1a7452d
Reviewed-on: https://boringssl-review.googlesource.com/10221
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
It's odd that a function like ssl_bytes_to_cipher_list secretly has side
effects all over the place. This removes the need for the TLS 1.3 code
to re-query the version range, and it removes the requirement that the
RI extension be first.
Change-Id: Ic9af549db3aaa8880f3c591b8a13ba9ae91d6a46
Reviewed-on: https://boringssl-review.googlesource.com/10220
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Between TLS 1.2, TLS 1.3, and the early callback, we've got a lot of
ClientHello parsers. Unify everything on the early callback's parser. As
a side effect, this means we can parse a ClientHello fairly succinctly
from any function which will let us split up ClientHello states where
appropriate.
Change-Id: I2359b75f80926cc7d827570cf33f93029b39e525
Reviewed-on: https://boringssl-review.googlesource.com/10184
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
tls13_process_certificate can take a boolean for whether anonymous is
allowed. This does change the error on the client slightly, but I think
this is correct anyway. It is not a syntax error for the server to send
no certificates in so far as the Certificate message allows it. It's
just illegal.
Change-Id: I1af80dacf23f50aad0b1fbd884bc068a40714399
Reviewed-on: https://boringssl-review.googlesource.com/9072
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Extend the DTLS mock clock to apply to sessions too and test that
resumption behaves as expected.
Change-Id: Ib8fdec91b36e11cfa032872b63cf589f93b3da13
Reviewed-on: https://boringssl-review.googlesource.com/9110
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
We broke this to varying degrees ages ago.
This is the logic to implement the variations of rules in TLS to discard
sessions after a failed connection, where a failed connection could be
one of:
- A connection that was not cleanly shut down.
- A connection that received a fatal alert.
The first one is nonsense since close_notify does not actually work in
the real world. The second is a vaguely more plausible but...
- A stateless ticket-based server can't drop sessions anyway.
- In TLS 1.3, a client may receive many tickets over the lifetime of a
single connection. With an external session cache like ours which may,
in theory, but multithreaded, this will be a huge hassle to track.
- A client may well attempt to establish a connection and reuse the
session before we receive the fatal alert, so any application state we
hope to manage won't really work.
- An attacker can always close the connection before the fatal alert, so
whatever security policy clearing the session gave is easily
bypassable.
Implementation-wise, this has basically never worked. The
ssl_clear_bad_session logic called into SSL_CTX_remove_session which
relied on the internal session cache. (Sessions not in the internal
session cache don't get removed.) The internal session cache was only
useful for a server, where tickets prevent this mechanism from doing
anything. For a client, we since removed the internal session cache, so
nothing got removed. The API for a client also did not work as it gave
the SSL_SESSION, not the SSL, so a consumer would not know the key to
invalidate anyway.
The recent session state splitting change further broke this.
Moreover, calling into SSL_CTX_remove_session logic like that is
extremely dubious because it mutates the not_resumable flag on the
SSL_SESSION which isn't thread-safe.
Spec-wise, TLS 1.3 has downgraded the MUST to a SHOULD.
Given all that mess, just remove this code. It is no longer necessary to
call SSL_shutdown just to make session caching work.
Change-Id: Ib601937bfc5f6b40436941e1c86566906bb3165d
Reviewed-on: https://boringssl-review.googlesource.com/9091
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Save a little bit of typing at the call site.
Change-Id: I818535409b57a694e5e0ea0e9741d89f2be89375
Reviewed-on: https://boringssl-review.googlesource.com/9090
Reviewed-by: Adam Langley <agl@google.com>
We will now send tickets as a server and accept them as a
client. Correctly offering and resuming them in the handshake will be
implemented in a follow-up.
Now that we're actually processing draft 14 tickets, bump the draft
version.
Change-Id: I304320a29c4ffe564fa9c00642a4ace96ff8d871
Reviewed-on: https://boringssl-review.googlesource.com/8982
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Change-Id: Id6a7443246479c62cbe0024e2131a2013959e21e
Reviewed-on: https://boringssl-review.googlesource.com/9078
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
OpenSSL 1.1.0 added a function to tell if an SSL* is DTLS or not. This
is probably a good idea, especially since SSL_version returns
non-normalized versions.
BUG=91
Change-Id: I25c6cf08b2ebabf0c610c74691de103399f729bc
Reviewed-on: https://boringssl-review.googlesource.com/9077
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
BUG=74
Change-Id: I72d52c1fbc3413e940dddbc0b20c7f22459da693
Reviewed-on: https://boringssl-review.googlesource.com/8981
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Change-Id: I5cc194fc0a3ba8283049078e5671c924ee23036c
Reviewed-on: https://boringssl-review.googlesource.com/8980
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
To prevent configuration/established session confusion, the handshake
session state is separated into the configured session (ssl->session)
and the newly created session (ssl->s3->new_session). Upon conclusion of
the handshake, the finalized session is stored
in (ssl->s3->established_session). During the handshake, any requests
for the session (SSL_get_session) return a non-resumable session, to
prevent resumption of a partially filled session. Sessions should only
be cached upon the completion of the full handshake, using the resulting
established_session. The semantics of accessors on the session are
maintained mid-renego.
Change-Id: I4358aecb71fce4fe14a6746c5af1416a69935078
Reviewed-on: https://boringssl-review.googlesource.com/8612
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This finishes getting rid of ssl_read_bytes! Now we have separate
entry-points for the various cases. For now, I've kept TLS handshake
consuming records partially. When we do the BIO-less API, I expect that
will need to change, since we won't have the record buffer available.
(Instead, the ssl3_read_handshake_bytes and extend_handshake_buffer pair
will look more like the DTLS side or Go and pull the entire record into
init_buf.)
This change opts to make read_app_data drive the message to completion
in anticipation of DTLS 1.3. That hasn't been specified, but
NewSessionTicket certainly will exist. Knowing that DTLS necessarily has
interleave seems something better suited for the SSL_PROTOCOL_METHOD
internals to drive.
It needs refining, but SSL_PROTOCOL_METHOD is now actually a half-decent
abstraction boundary between the higher-level protocol logic and
DTLS/TLS-specific record-layer and message dispatchy bits.
BUG=83
Change-Id: I9b4626bb8a29d9cb30174d9e6912bb420ed45aff
Reviewed-on: https://boringssl-review.googlesource.com/9001
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
With the previous DTLS change, the dispatch layer only cares about the
end of the handshake to know when to drop the current message. TLS 1.3
post-handshake messages will need a similar hook, so convert it to this
lower-level one.
BUG=83
Change-Id: I4c8c3ba55ba793afa065bf261a7bccac8816c348
Reviewed-on: https://boringssl-review.googlesource.com/8989
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
For TLS 1.3, we will need to process more complex post-handshake
messages. It is simplest if we use the same mechanism. In preparation,
allow ssl3_get_message to be called at any point.
Note that this stops reserving SSL3_RT_MAX_PLAIN_LENGTH in init_buf
right off the bat. Instead it will grow as-needed to accomodate the
handshake. SSL3_RT_MAX_PLAIN_LENGTH is rather larger than we probably
need to receive, particularly as a server, so this seems a good plan.
BUG=83
Change-Id: Id7f4024afc4c8a713b46b0d1625432315594350e
Reviewed-on: https://boringssl-review.googlesource.com/8985
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Alas, we will need a version fallback for TLS 1.3 again.
This deprecates SSL_MODE_SEND_FALLBACK_SCSV. Rather than supplying a
boolean, have BoringSSL be aware of the real maximum version so we can
change the TLS 1.3 anti-downgrade logic to kick in, even when
max_version is set to 1.2.
The fallback version replaces the maximum version when it is set for
almost all purposes, except for downgrade protection purposes.
BUG=chromium:630165
Change-Id: I4c841dcbc6e55a282b223dfe169ac89c83c8a01f
Reviewed-on: https://boringssl-review.googlesource.com/8882
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
It really should take a few more parameters and save a bit of
long-winded initialization work.
Change-Id: I2823f0aa82be39914a156323f6f32b470b6d6a3b
Reviewed-on: https://boringssl-review.googlesource.com/8876
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
[Tests added by davidben.]
Change-Id: I0d54a4f8b8fe91b348ff22658d95340cdb48b089
Reviewed-on: https://boringssl-review.googlesource.com/8850
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Share a bit more of it between TLS 1.2 and 1.3.
Change-Id: I43c9dbf785a3d33db1793cffb0fdbd3af075cc89
Reviewed-on: https://boringssl-review.googlesource.com/8849
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This adds three more formats to the SSLKEYLOGFILE format to support TLS
1.3:
EARLY_TRAFFIC_SECRET <client_random> <early_traffic_secret>
HANDSHAKE_TRAFFIC_SECRET <client_random> <handshake_traffic_secret>
TRAFFIC_SECRET_0 <client_random> <traffic_secret_0>
(We don't implement 0-RTT yet, so only the second two are implemented.)
Motivations:
1. If emitted the non-traffic secrets (early, handshake, and master) or
the IKMs, Wireshark needs to maintain a handshake hash. I don't
believe they need to do this today.
2. We don't store more than one non-traffic secret at a time and don't
keep traffic secrets for longer than needed. That suggests three
separate lines logged at different times rather than one line.
3. If 0-RTT isn't used, we probably won't even compute the early traffic
secret, so that further suggests three different lines.
4. If the handshake didn't get far enough to complete, we won't have an
TRAFFIC_SECRET_0 to log at all. That seems like exactly when
Wireshark would be handy, which means we want to log secrets as they
are computed.
MT from NSS has ACK'd over email that this format would be acceptable
for them, so let's go with it.
Change-Id: I4d685a1355dff4d4bd200310029d502bb6c511f9
Reviewed-on: https://boringssl-review.googlesource.com/8841
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Every flush but the last is always immediately followed by a read. Add a
combined wait mode to make things simpler. Unfortunately, both flights
we have (the state machine doesn't write the first ClientHello) are
followed immediately by a state change, which means we still need some
state in between because we must run code after write_message but before
read_message.
(This way to fix that is to get rid of the buffer BIO, change
write_message to write_flight, and allow things like init_message /
finish_message / init_message / finish_message / set_write_state /
init_message / finish_message / write_flight.)
Change-Id: Iebaa388ccbe7fcad48c1b2256e1c0d3a7c9c8a2a
Reviewed-on: https://boringssl-review.googlesource.com/8828
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This adds the machinery for doing TLS 1.3 1RTT.
Change-Id: I736921ffe9dc6f6e64a08a836df6bb166d20f504
Reviewed-on: https://boringssl-review.googlesource.com/8720
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This is the equivalent of FragmentAcrossChangeCipherSuite for DTLS. It
is possible for us to, while receiving pre-CCS handshake messages, to
buffer up a message with sequence number meant for a post-CCS Finished.
When we then get to the new epoch and attempt to read the Finished, we
will process the buffered Finished although it was sent with the wrong
encryption.
Move ssl_set_{read,write}_state to SSL_PROTOCOL_METHOD hooks as this is
a property of the transport. Notably, read_state may fail. In DTLS
check the handshake buffer size. We could place this check in
read_change_cipher_spec, but TLS 1.3 has no ChangeCipherSpec message, so
we will need to implement this at the cipher change point anyway. (For
now, there is only an assert on the TLS side. This will be replaced with
a proper check in TLS 1.3.)
Change-Id: Ia52b0b81e7db53e9ed2d4f6d334a1cce13e93297
Reviewed-on: https://boringssl-review.googlesource.com/8790
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This allows us to implement custom RSA-PSS-based keys, so the async TLS
1.3 tests can proceed. For now, both sign and sign_digest exist, so
downstreams only need to manage a small change atomically. We'll remove
sign_digest separately.
In doing so, fold all the *_complete hooks into a single complete hook
as no one who implemented two operations ever used different function
pointers for them.
While I'm here, I've bumped BORINGSSL_API_VERSION. I do not believe we
have any SSL_PRIVATE_KEY_METHOD versions who cannot update atomically,
but save a round-trip in case we do. It's free.
Change-Id: I7f031aabfb3343805deee429b9e244aed5d76aed
Reviewed-on: https://boringssl-review.googlesource.com/8786
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This makes custom private keys and EVP_PKEYs symmetric again. There is
no longer a requirement that the caller pre-filter the configured
signing prefs.
Also switch EVP_PKEY_RSA to NID_rsaEncryption. These are identical, but
if some key types are to be NIDs, we should make them all NIDs.
Change-Id: I82ea41c27a3c57f4c4401ffe1ccad406783e4c64
Reviewed-on: https://boringssl-review.googlesource.com/8785
Reviewed-by: David Benjamin <davidben@google.com>
Change-Id: I9ec1a8c87e29ffd4fabef68beb6d094aa7d9a215
Reviewed-on: https://boringssl-review.googlesource.com/8795
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This is already duplicated between client and server and otherwise will
get duplicated yet again for TLS 1.3.
Change-Id: Ia8a352f9bc76fab0f88c1629d08a1da4c13d2510
Reviewed-on: https://boringssl-review.googlesource.com/8778
Reviewed-by: David Benjamin <davidben@google.com>
This will get shared between TLS 1.2 and 1.3.
Change-Id: I9c0d73a087942ac4f8f2075a44bd55647c0dd70b
Reviewed-on: https://boringssl-review.googlesource.com/8777
Reviewed-by: David Benjamin <davidben@google.com>
These will all want to be shared with the TLS 1.3 handshake.
Change-Id: I4e50dc0ed2295d43c7ae800015d71c1406311801
Reviewed-on: https://boringssl-review.googlesource.com/8776
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
For now, skip the 1.2 -> 1.1 signal since that will affect shipping
code. We may as well enable it too, but wait until things have settled
down. This implements the version in draft-14 since draft-13's isn't
backwards-compatible.
Change-Id: I46be43e6f4c5203eb4ae006d1c6a2fe7d7a949ec
Reviewed-on: https://boringssl-review.googlesource.com/8724
Reviewed-by: David Benjamin <davidben@google.com>
Implement in both C and Go. To test this, route config into all the
sign.go functions so we can expose bugs to skip the check.
Unfortunately, custom private keys are going to be a little weird since
we can't check their curve type. We may need to muse on what to do here.
Perhaps the key type bit should return an enum that includes the curve?
It's weird because, going forward, hopefully all new key types have
exactly one kind of signature so key type == sig alg == sig alg prefs.
Change-Id: I1f487ec143512ead931e3392e8be2a3172abe3d2
Reviewed-on: https://boringssl-review.googlesource.com/8701
Reviewed-by: David Benjamin <davidben@google.com>
ssl_verify_* already ought to be checking this, so there's only a need
to check against the configured preferences.
Change-Id: I79bc771969c57f953278e622084641e6e20108e3
Reviewed-on: https://boringssl-review.googlesource.com/8698
Reviewed-by: David Benjamin <davidben@google.com>
Rather than blindly select SHA-1 if we can't find a matching one, act as
if the peer advertised rsa_pkcs1_sha1 and ecdsa_sha1. This means that we
will fail the handshake if no common algorithm may be found.
This is done in preparation for removing the SHA-1 default in TLS 1.3.
Change-Id: I3584947909d3d6988b940f9404044cace265b20d
Reviewed-on: https://boringssl-review.googlesource.com/8695
Reviewed-by: David Benjamin <davidben@google.com>
Instead, in SSL_set_private_key_digest_prefs, convert the NID list to a
sigalgs list. We'll need to add a new API later when custom key callers
are ready to start advertising RSA-PSS.
This removes all callers of tls12_get_hash except inside the signing and
verifying functions.
Change-Id: Ie534f3b736c6ac6ebeb0d7770d489f72e3321865
Reviewed-on: https://boringssl-review.googlesource.com/8693
Reviewed-by: David Benjamin <davidben@google.com>
