This function allows a client to send a TLS 1.3 KeyUpdate message.
Change-Id: I69935253795a79d65a8c85b652378bf04b7058e2
Reviewed-on: https://boringssl-review.googlesource.com/c/33706
Commit-Queue: David Benjamin <davidben@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
In [1], section 5.1, an optimised re-encryption process is given. In the
code, this simplifies to not needing to rebuild the ciphertext at all.
Thanks to John Schanck for pointing this out.
[1] https://eprint.iacr.org/2018/1174.pdf
Change-Id: I807bd509e936b7e82a43e8656444431546e9bbdf
Reviewed-on: https://boringssl-review.googlesource.com/c/33705
Commit-Queue: David Benjamin <davidben@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Since the underlying operation is deterministic the confirmation hash
isn't needed and SXY didn't use it in their proof.
Change-Id: I3a03c20ee79645cf94b10dbfe654c1b88d9aa416
Reviewed-on: https://boringssl-review.googlesource.com/c/33605
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
This allows an application to obtain the current TLS 1.3 traffic secrets
for a connection.
Change-Id: I8ad8d0559caba266f74081441dea54b22da3db20
Reviewed-on: https://boringssl-review.googlesource.com/c/33590
Commit-Queue: Adam Langley <agl@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
This change includes support for a variant of [HRSS], a post-quantum KEM
based on NTRU. It includes changes suggested in [SXY]. This is not yet
ready for any deployment: some breaking changes, like removing the
confirmation hash, are still planned.
(CLA for HRSS's assembly code noted in b/119426559.)
[HRSS] https://eprint.iacr.org/2017/667.pdf
[SXY] https://eprint.iacr.org/2017/1005.pdf
Change-Id: I85d813733b066d5c578484bdd248de3f764194db
Reviewed-on: https://boringssl-review.googlesource.com/c/33105
Reviewed-by: David Benjamin <davidben@google.com>
If BIO_read returns partial reads, d2i_*_bio currently fails. This is a
partial (hah) regression from 419144adce.
The old a_d2i_fp.c code did *not* tolerate partial reads in the ASN.1
header, but it *did* tolerate them in the ASN.1 body. Since partial
reads are more likely to land in the body than the header, I think we
can say d2i_*_bio was "supposed to" tolerate this but had a bug in the
first few bytes.
Fix it for both cases. Add a regression test for this and the partial
write case (which works fine).
See also https://github.com/google/conscrypt/pull/587.
Change-Id: I886f6388f0b80621960e196cf2a56f5c02a14a04
Reviewed-on: https://boringssl-review.googlesource.com/c/33484
Commit-Queue: David Benjamin <davidben@google.com>
Reviewed-by: Adam Langley <agl@google.com>
It appears to be only used in p256-x86_64_test.cc, which is obviously
64-bit only and do not affected by this. Internal code search doesn't
find any uses and GitHub just finds several thousand copies of bn.h.
Change-Id: If8185bf6275d90efa172c95cb67c62c86a17e394
Reviewed-on: https://boringssl-review.googlesource.com/c/33464
Commit-Queue: David Benjamin <davidben@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Squatting these names is rather rude. Also hex_to_string and
string_to_hex do the opposite of what one would expect, so rename them
to something a bit less confusing.
Update-Note: This removes some random utility functions. name_cmp is
very specific to OpenSSL's config file format, so it's unlikely anyone
is relying on it. I removed the one use of hex_to_string and
string_to_hex I could find.
Change-Id: I01554885ad306251e6982100d0b15cd89b1cdea7
Reviewed-on: https://boringssl-review.googlesource.com/c/33364
Commit-Queue: David Benjamin <davidben@google.com>
Commit-Queue: Adam Langley <agl@google.com>
Reviewed-by: Adam Langley <agl@google.com>
JDK 11 shipped with a TLS 1.3 implementation enabled by default.
Unfortunately, that implementation does not work and fails to send the
SNI extension on resumption. See
https://bugs.openjdk.java.net/browse/JDK-8211806.
This means servers which enable TLS 1.3 will see JDK 11 clients work on
the first connection and then fail on all subsequent connections. Add
SSL_set_jdk11_workaround which configures a workaround to fingerprint
JDK 11 and disable TLS 1.3 with the faulty clients.
JDK 11 also implemented the downgrade signal, which means that
connections that trigger the workaround also must not send the downgrade
signal. Unfortunately, the downgrade signal's security properties are
sensitive to the existence of any unmarked TLS 1.2 ServerHello paths. To
salvage this, pick a new random downgrade marker for this scenario and
modify the client to treat it as an alias of the standard one.
Per the link above, JDK 11.0.2 will fix this bug. Hopefully the
workaround can be retired sometime after it is released.
Change-Id: I0627609a8cadf7cc214073eb7f1e880acdf613ef
Reviewed-on: https://boringssl-review.googlesource.com/c/33284
Commit-Queue: David Benjamin <davidben@google.com>
Reviewed-by: Adam Langley <agl@google.com>
C99 added macros such as PRIu64 to inttypes.h, but it said to exclude them from
C++ unless __STDC_FORMAT_MACROS or __STDC_CONSTANT_MACROS was defined. This
text was never incorporated into any C++ standard and explicitly overruled in
C++11.
Some libc headers followed C99. Notably, glibc prior to 2.18
(https://sourceware.org/bugzilla/show_bug.cgi?id=15366) and old versions of the
Android NDK.
In the NDK, although it was fixed some time ago (API level 20), the NDK used to
use separate headers per API level. Only applications using minSdkVersion >= 20
would get the fix. Starting NDK r14, "unified" headers are available which,
among other things, make the fix available (opt-in) independent of
minSdkVersion. In r15, unified headers are opt-out, and in r16 they are
mandatory.
Try removing these and see if anyone notices. The former is past our five year
watermark. The latter is not and Android has hit
https://boringssl-review.googlesource.com/c/boringssl/+/32686 before, but
unless it is really widespread, it's probably simpler to ask consumers to
define __STDC_CONSTANT_MACROS and __STDC_FORMAT_MACROS globally.
Update-Note: If you see compile failures relating to PRIu64, UINT64_MAX, and
friends, update your glibc or NDK. As a short-term fix, add
__STDC_CONSTANT_MACROS and __STDC_FORMAT_MACROS to your build, but get in touch
so we have a sense of how widespread it is.
Bug: 198
Change-Id: I56cca5f9acdff803de1748254bc45096e4c959c2
Reviewed-on: https://boringssl-review.googlesource.com/c/33146
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
The change seems to have stuck, so bring us closer to C/++11 static asserts.
(If we later find we need to support worse toolchains, we can always use
__LINE__ or __COUNTER__ to avoid duplicate typedef names and just punt on
embedding the message into the type name.)
Change-Id: I0e5bb1106405066f07740728e19ebe13cae3e0ee
Reviewed-on: https://boringssl-review.googlesource.com/c/33145
Commit-Queue: Adam Langley <agl@google.com>
Reviewed-by: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
The function does not take ownership of |e| and this makes that clear.
Change-Id: I53bb5fa94bec5d16d1c904b59391d36df7abbde6
Reviewed-on: https://boringssl-review.googlesource.com/c/33164
Commit-Queue: Adam Langley <agl@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
The Clang used in the Android SDK, at least, defines both __ARM_NEON__
and __ARM_NEON for ARMv7, but only the latter for AArch64.
This change switches each use of __ARM_NEON__ to accept either.
Change-Id: I3b5d5badc9ff0210888fd456e9329dc53a2b9b09
Reviewed-on: https://boringssl-review.googlesource.com/c/33104
Commit-Queue: Adam Langley <alangley@gmail.com>
Commit-Queue: David Benjamin <davidben@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Reportedly some combination of C++ modules and old clang gets upset.
That seems an inadvisable combination, but including headers under
extern "C" is rude, so fix it.
Change-Id: I12f873e1be41697b67f2b1145387a3c6fc769c28
Reviewed-on: https://boringssl-review.googlesource.com/c/33024
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Update-Note: This effectively reverts https://boringssl-review.googlesource.com/4733,
which was an attempt at a well-defined story during renegotiation and pre-handshake.
This is a behavior change, though one that matches OpenSSL upstream. It is also more
consistent with other functions, such as SSL_get_curve_id. Renegotiation is now
opt-in, so this is less critical, and, if we change the behavior mid-renegotiation,
we should do it consistently to all getters.
Change-Id: Ica6b386fb7c5ac524395de6650642edd27cac36f
Reviewed-on: https://boringssl-review.googlesource.com/c/32904
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Avoid forcing the QUIC implementation to buffer this when we already have code
to do it. This also avoids QUIC implementations relying on this hook being
called for each individual message.
Change-Id: If2d70f045a25da1aa2b10fdae262cae331da06b1
Reviewed-on: https://boringssl-review.googlesource.com/c/32785
Commit-Queue: Steven Valdez <svaldez@google.com>
Reviewed-by: Steven Valdez <svaldez@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
0-RTT support and APIs to consume NewSessionTicket will be added in a
follow-up.
Change-Id: Ib2b2c6b618b3e33a74355fb53fdbd2ffafcc5c56
Reviewed-on: https://boringssl-review.googlesource.com/c/31744
Commit-Queue: Steven Valdez <svaldez@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Uses have been either migrated to
OPENSSL_NO_THREADS_CORRUPT_MEMORY_AND_LEAK_SECRETS_IF_THREADED or removed.
Update-Note: Anything still relying on OPENSSL_NO_THREADS should be updated to
either use OPENSSL_NO_THREADS_CORRUPT_MEMORY_AND_LEAK_SECRETS_IF_THREADED if a
single-threaded-only platform, or fixed to depend on the platform threading
library.
Change-Id: I02ec63bc7ede892bd6463f1a23e2cec70887fab3
Reviewed-on: https://boringssl-review.googlesource.com/c/32744
Commit-Queue: Adam Langley <agl@google.com>
Reviewed-by: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Ryan noticed that CBS_ASN1_{SEQUENCE,SET} used CBS_ASN1_CONSTRUCTED
before it was defined. The C preprocessor expands late, so this works,
but it is weird. Flip the order.
There was also some question about the constructed bit, which is
different from how ASN.1 formally specifies it. (ASN.1 believes the
constructed bit is a property of the element, not the tag. We fold it in
because it's entirely computable[*] from the type in DER, so it's easier
to fold it in.) Move existing text to the section header and expand on
it.
[*] DER forbids constructed strings so string types are always
primitive. ASN.1 forbids implicitly tagging CHOICE or ANY, so the
inherited constructed bit cannot vary by value.
Change-Id: Ieb91f9d6898d582dda19fec8b042051b67f217a8
Reviewed-on: https://boringssl-review.googlesource.com/c/32725
Reviewed-by: Ryan Sleevi <rsleevi@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Although this macro is not public API and is unused in BoringSSL,
wpa_supplicant uses it to define its own stacks. Remove this once
wpa_supplicant has been fixed.
Change-Id: I1f85e06efe4057b6490bf93bf4dea773dcb491c5
Reviewed-on: https://boringssl-review.googlesource.com/c/32764
Reviewed-by: Robert Sloan <varomodt@google.com>
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
MSVC 2015 supports the static_assert keyword in C mode (not quite what C11
specifies: _Static_assert is the keyword and static_assert is a macro in
assert.h, but close enough). GCC and Clang both support _Static_assert at all C
versions. GCC has supported it in GCC 4.6.
glibc supports the assert.h macro since glibc 2.16, but does condition it on
the version, so we likely can't rely on that yet. Still, this means we should
be able to rely on proper static assertions at this point. In particular, this
means we'd no longer worry about emitting multiple typedefs of the same name.
Though at some point, it'd be nice to rely on being built in C11 mode. Then we
can just pull in assert.h and use bare static_assert, and the atomics business
needn't be a build flag.
Update-Note: If static asserts break the build, it's this CL's fault.
Change-Id: I1b09043aae41242f6d40386c063e381d00b028d8
Reviewed-on: https://boringssl-review.googlesource.com/c/32604
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
An EVP_AEAD_CTX used to be a small struct that contained a pointer to
an AEAD-specific context. That involved heap allocating the
AEAD-specific context, which was a problem for users who wanted to setup
and discard these objects quickly.
Instead this change makes EVP_AEAD_CTX large enough to contain the
AEAD-specific context inside itself. The dominant AEAD is AES-GCM, and
that's also the largest. So, in practice, this shouldn't waste too much
memory.
Change-Id: I795cb37afae9df1424f882adaf514a222e040c80
Reviewed-on: https://boringssl-review.googlesource.com/c/32506
Commit-Queue: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Reviewed-by: David Benjamin <davidben@google.com>
Sections are separated by two blank lines.
Change-Id: If4f94a3b8f96044e83ab116e7603f1654130a551
Reviewed-on: https://boringssl-review.googlesource.com/c/32584
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
cryptography.io wraps this function and so we have to keep the LHASH_OF
argument for now.
Change-Id: I4e071dee973c3931a4005678ce4135161a5861bd
Reviewed-on: https://boringssl-review.googlesource.com/c/32524
Commit-Queue: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Reviewed-by: David Benjamin <davidben@google.com>
Node references it these days. Also replace the no-op modes with negative
numbers rather than zero. Stream ciphers like RC4 report a "mode" of zero, so
code comparing the mode to a dummy value will get confused.
(I came across https://github.com/nodejs/node/pull/23635, though we'd have run
into it sooner or later anyway. Better to just define the value and avoid ifdef
proliferation.)
Change-Id: I223f25663e138480ad83f35aa16f5218f1425563
Reviewed-on: https://boringssl-review.googlesource.com/c/32464
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
As with sk_*, this. This doesn't fix the function pointer casts. Those
will be done in a follow-up change. Also add a test for lh_*_doall so we
cover both function pointer shapes.
Update-Note: This reworks how LHASH_OF(T) is implemented and also only
pulls in the definitions where used, but LHASH_OF(T) is never used
externally, so I wouldn't expect this to affect things.
Change-Id: I7970ce8c41b8589d6672b71dd03658d0e3bd89a7
Reviewed-on: https://boringssl-review.googlesource.com/c/32119
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
Due to non-compliant middleboxes, it is possible we'll need to do some
surgery to this mechanism. Making it per-SSL is a little more flexible
and also eases some tests in Chromium until we get its SSL_CTX usage
fixed up.
Also fix up BoringSSL tests. We forgot to test it at TLS 1.0 and use the
-expect-tls13-downgrade flag.
Bug: 226
Change-Id: Ib39227e74e2d6f5e1fbc1ebcc091e751471b3cdc
Reviewed-on: https://boringssl-review.googlesource.com/c/32424
Reviewed-by: Steven Valdez <svaldez@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
We only capitalize the first word. I've left Token Binding alone because
that appears to be the full name. But "QUIC Transport Parameters" just
describe's QUIC's transport parameters.
Change-Id: I7e0f69e24ff4080c0470c87825dffa1a9aa6df97
Reviewed-on: https://boringssl-review.googlesource.com/c/32344
Commit-Queue: Steven Valdez <svaldez@google.com>
Reviewed-by: Steven Valdez <svaldez@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Change-Id: I4ec8a21264c2c73ebf8ca6a93b96eba29bd2d29e
Reviewed-on: https://boringssl-review.googlesource.com/c/32345
Reviewed-by: Robert Sloan <varomodt@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This removes the last mention of LHASH in public headers. This can only
break people who stack-allocate CONF or access the data field. The
latter does not happen (external code never calls lh_CONF_VALUE_*
functions). The former could not work as there would be no way to clean
it up.
Update-Note: CONF is now opaque.
Change-Id: Iad3796c4e75874530d7a70fde2f84a390def2d49
Reviewed-on: https://boringssl-review.googlesource.com/32118
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
Everyone calls this with NULL anyway. People never actually use
lh_CONF_VALUE_* functions (or any other lh_* functions for that matter).
Also remove unused X509V3_EXT_CRL_add_conf prototype.
This removes one of the last mentions of LHASH_OF in public headers.
Update-Note: X509V3_EXT_conf_nid calls that pass a non-NULL first
parameter will fail to compile.
Change-Id: Ia6302ef7b494efeb9b63ab75a18bc340909dcba3
Reviewed-on: https://boringssl-review.googlesource.com/32117
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
C and C++ handle inline functions differently. In C++, an inline function is
defined in just the header file, potentially emitted in multiple compilation
units (in cases the compiler did not inline), but each copy must be identical
to satsify ODR. In C, a non-static inline must be manually emitted in exactly
one compilation unit with a separate extern inline declaration.
In both languages, exported inline functions referencing file-local symbols are
problematic. C forbids this altogether (though GCC and Clang seem not to
enforce it). It works in C++, but ODR requires the definitions be identical,
including all names in the definitions resolving to the "same entity". In
practice, this is unlikely to be a problem, but an inline function that returns
a pointer to a file-local symbol could compile oddly.
Historically, we used static inline in headers. However, to satisfy ODR, use
plain inline in C++, to allow inline consumer functions to call our header
functions. Plain inline would also work better with C99 inline, but that is not
used much in practice, extern inline is tedious, and there are conflicts with
the old gnu89 model: https://stackoverflow.com/questions/216510/extern-inline
For dual C/C++ code, use a macro to dispatch between these. For C++-only
code, stop using static inline and just use plain inline.
Update-Note: If you see weird C++ compile or link failures in header
functions, this change is probably to blame. Though this change
doesn't affect C and non-static inline is extremely common in C++,
so I would expect this to be fine.
Change-Id: Ibb0bf8ff57143fc14e10342854e467f85a5e4a82
Reviewed-on: https://boringssl-review.googlesource.com/32116
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
TARGET_OS_IPHONE isn't defined without including <TargetConditionals.h>. Oops.
Confirmed now that OPENSSL_IOS gets defined where we expect.
Update-Note: There is some chance this will fail to build on some macOS host
builds of Android? https://codereview.chromium.org/538563002 suggests something
weird happens. However those Android builds of BoringSSL would already be
problematic because they'd set OPENSSL_STATIC_ARMCAP thinking they were iOS.
Thus I've intentionally kept the assumption that __APPLE__ implies a Darwin
target. If it goes through, all is well. If not, we'll learn more about that
configuration and that we likely need to revise our OPENSSL_APPLE definition.
Bug: chromium:890115
Change-Id: I1df73ac2321391d2449edbeb9cfa295fd607f935
Reviewed-on: https://boringssl-review.googlesource.com/32204
Reviewed-by: Adam Langley <agl@google.com>
The calls to qsort and bsearch are still invalid, but not avoidable
without reimplementing them. Fortunately, they cross libraries, so CFI
does not object.
With that, all that's left is LHASH!
Bug: chromium:785442
Change-Id: I6d29f60fac5cde1f7870d7cc515346e55b98315b
Reviewed-on: https://boringssl-review.googlesource.com/32114
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
Unfortunately, some projects are calling into sk_pop_free directly, so
we must leave a compatibility version around for now.
Bug: chromium:785442
Change-Id: I1577fce6f23af02114f7e9f7bf2b14e9d22fa9ae
Reviewed-on: https://boringssl-review.googlesource.com/32113
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
This fixes:
- Undefined function pointer casts.
- Missing X509_INFO_new malloc failure checks.
- Pointless (int) cast on strlen.
- Missing ERR_GET_LIB in PEM_R_NO_START_LINE check.
- Broken error-handling if passing in an existing stack and we hit a
syntax error.
Bug: chromium:785442
Change-Id: I8be3523b0f13bdb3745938af9740d491486f8bf1
Reviewed-on: https://boringssl-review.googlesource.com/32109
Reviewed-by: Adam Langley <agl@google.com>
Lacking C++, this instead adds a mess of macros. With this done, all the
function-pointer-munging "_of" macros in asn1.h can also be removed.
Update-Note: A number of *really* old and unused ASN.1 macros were
removed.
Bug: chromium:785442
Change-Id: Iab260d114c7d8cdf0429759e714d91ce3f3c04b2
Reviewed-on: https://boringssl-review.googlesource.com/32106
Reviewed-by: Adam Langley <agl@google.com>
Reviewed-by: Adam Langley <alangley@gmail.com>
While it is okay to cast function pointers into different types for
generic storage, the pointer must be cast back to the exact same type
when calling. In particular, although C libraries do this sort of thing
all the time, calling a T* d2i function as a void* d2i function is
undefined:
If the function is defined with a type that is not compatible with the
type (of the expression) pointed to by the expression that denotes the
called function, the behavior is undefined
Fix some instances in the PEM/ASN1 wrapper functions. Synthesize helper
functions instead.
This CL just addresses the function pointer issues. The inherited legacy
OpenSSL ASN.1 code is still full other questionable data pointer dances
that will be much more difficult to excise. Continuing to exise that
code altogether (it is already unshipped from Cronet and unshipped from
Chrome but for WebRTC) is probably a better tack there.
This removes one (of many many) places where we require
-fsanitize-cfi-icall-generalize-pointers.
Bug: chromium:785442
Change-Id: Id8056ead6ef471f0fdf263bb50dc659da500e8ce
Reviewed-on: https://boringssl-review.googlesource.com/32105
Reviewed-by: Adam Langley <agl@google.com>
Reviewed-by: Adam Langley <alangley@gmail.com>
BoringSSL depends on the platform's locking APIs to make internal global
state thread-safe, including the PRNG. On some single-threaded embedded
platforms, locking APIs may not exist, so this dependency may be disabled
with a build flag.
Doing so means the consumer promises the library will never be used in any
multi-threaded address space. It causes BoringSSL to be globally thread-unsafe.
Setting it inappropriately will subtly and unpredictably corrupt memory and
leak secret keys.
Unfortunately, folks sometimes misinterpreted OPENSSL_NO_THREADS as skipping an
internal thread pool or disabling an optionally extra-thread-safe mode. This is
not and has never been the case. Rename it to
OPENSSL_NO_THREADS_CORRUPT_MEMORY_AND_LEAK_SECRETS_IF_THREADED to clarify what
this option does.
Update-Note: As a first step, this CL makes both OPENSSL_NO_THREADS and
OPENSSL_NO_THREADS_CORRUPT_MEMORY_AND_LEAK_SECRETS_IF_THREADED work. A later CL
will remove the old name, so migrate callers after or at the same time as
picking up this CL.
Change-Id: Ibe4964ae43eb7a52f08fd966fccb330c0cc11a8c
Reviewed-on: https://boringssl-review.googlesource.com/32084
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
This function doesn't actually exist. (If it did, it would be the same as
SHA512_Transform. We currently omit SHA224 and SHA384's low-level transform
functions.)
Change-Id: Ia9d3d7c86e8f70fd5e4f13b8de4f08440dccbdcb
Reviewed-on: https://boringssl-review.googlesource.com/32064
Reviewed-by: Adam Langley <agl@google.com>
BSSL_NAMESPACE_BEGIN needs to be defined unconditionally.
Change-Id: I1770ca6b6c19f9c732ef00ba8c89b112b421929d
Reviewed-on: https://boringssl-review.googlesource.com/31824
Reviewed-by: Adam Langley <agl@google.com>
MSAN is incompatible with hand-written assembly code. Previously we
required that OPENSSL_NO_ASM be set when building with MSAN, and the
CMake build would take care of this. However, with other build systems
it wasn't always so easy.
This change automatically disables assembly when the compiler is
configured for MSAN.
Change-Id: I6c219120f62d16b99bafc2efb02948ecbecaf87f
Reviewed-on: https://boringssl-review.googlesource.com/31724
Commit-Queue: David Benjamin <davidben@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
The assembly files need some includes. Also evp.h has some conflicting
macros. Finally, md5.c's pattern of checking if a function name is
defined needs to switch to checking MD5_ASM.
Change-Id: Ib1987ba6f279144f0505f6951dead53968e05f20
Reviewed-on: https://boringssl-review.googlesource.com/31704
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Adam Langley
Adam Langley
David Benjamin
Steven Valdez
Steven Valdez
Jeremy Apthorp