The change seems to have stuck, so bring us closer to C/++11 static asserts.
(If we later find we need to support worse toolchains, we can always use
__LINE__ or __COUNTER__ to avoid duplicate typedef names and just punt on
embedding the message into the type name.)
Change-Id: I0e5bb1106405066f07740728e19ebe13cae3e0ee
Reviewed-on: https://boringssl-review.googlesource.com/c/33145
Commit-Queue: Adam Langley <agl@google.com>
Reviewed-by: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
RSA keygen uses this to pick primes. May as well avoid bouncing on
malloc. (The BIGNUM internally allocates, of course, but that allocation
will be absorbed by BN_CTX in RSA keygen.)
Change-Id: Ie2243a6e48b9c55f777153cbf67ba5c06688c2f1
Reviewed-on: https://boringssl-review.googlesource.com/26887
Reviewed-by: Adam Langley <agl@google.com>
Rabin-Miller requires selecting a random number from 2 to |w|-1.
This is done by picking an N-bit number and discarding out-of-range
values. This leaks information about |w|, so apply blinding. Rather than
discard bad values, adjust them to be in range.
Though not uniformly selected, these adjusted values
are still usable as Rabin-Miller checks.
Rabin-Miller is already probabilistic, so we could reach the desired
confidence levels by just suitably increasing the iteration count.
However, to align with FIPS 186-4, we use a more pessimal analysis: we
do not count the non-uniform values towards the iteration count. As a
result, this function is more complex and has more timing risk than
necessary.
We count both total iterations and uniform ones and iterate until we've
reached at least |BN_PRIME_CHECKS_BLINDED| and |iterations|,
respectively. If the latter is large enough, it will be the limiting
factor with high probability and we won't leak information.
Note this blinding does not impact most calls when picking primes
because composites are rejected early. Only the two secret primes see
extra work. So while this does make the BNTest.PrimeChecking test take
about 2x longer to run on debug mode, RSA key generation time is fine.
Another, perhaps simpler, option here would have to run
bn_rand_range_words to the full 100 count, select an arbitrary
successful try, and declare failure of the entire keygen process (as we
do already) if all tries failed. I went with the option in this CL
because I happened to come up with it first, and because the failure
probability decreases much faster. Additionally, the option in this CL
does not affect composite numbers, while the alternate would. This gives
a smaller multiplier on our entropy draw. We also continue to use the
"wasted" work for stronger assurance on primality. FIPS' numbers are
remarkably low, considering the increase has negligible cost.
Thanks to Nathan Benjamin for helping me explore the failure rate as the
target count and blinding count change.
Now we're down to the rest of RSA keygen, which will require all the
operations we've traditionally just avoided in constant-time code!
Median of 29 RSA keygens: 0m0.169s -> 0m0.298s
(Accuracy beyond 0.1s is questionable. The runs at subsequent test- and
rename-only CLs were 0m0.217s, 0m0.245s, 0m0.244s, 0m0.247s.)
Bug: 238
Change-Id: Id6406c3020f2585b86946eb17df64ac42f30ebab
Reviewed-on: https://boringssl-review.googlesource.com/25890
Commit-Queue: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
This isn't strictly necessary now that BIGNUMs are safe, but we get to
rely on type-system annotations from EC_SCALAR. Additionally,
EC_POINT_mul depends on BN_div, while the EC_SCALAR version does not.
Change-Id: I75e6967f3d35aef17278b94862f4e506baff5c23
Reviewed-on: https://boringssl-review.googlesource.com/26424
Reviewed-by: Steven Valdez <svaldez@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Functions that deserialize from bytes and Montgomery multiplication have
no reason to minimize their inputs.
Bug: 232
Change-Id: I121cc9b388033d684057b9df4ad0c08364849f58
Reviewed-on: https://boringssl-review.googlesource.com/25258
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
This has no behavior change, but it has a semantic one. This CL is an
assertion that all BIGNUM functions tolerate non-minimal BIGNUMs now.
Specifically:
- Functions that do not touch top/width are assumed to not care.
- Functions that do touch top/width will be changed by this CL. These
should be checked in review that they tolerate non-minimal BIGNUMs.
Subsequent CLs will start adjusting the widths that BIGNUM functions
output, to fix timing leaks.
Bug: 232
Change-Id: I3a2b41b071f2174452f8d3801bce5c78947bb8f7
Reviewed-on: https://boringssl-review.googlesource.com/25257
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
None of the asymmetric crypto we inherented from OpenSSL is
constant-time because of BIGNUM. BIGNUM chops leading zeros off the
front of everything, so we end up leaking information about the first
word, in theory. BIGNUM functions additionally tend to take the full
range of inputs and then call into BN_nnmod at various points.
All our secret values should be acted on in constant-time, but k in
ECDSA is a particularly sensitive value. So, ecdsa_sign_setup, in an
attempt to mitigate the BIGNUM leaks, would add a couple copies of the
order.
This does not work at all. k is used to compute two values: k^-1 and kG.
The first operation when computing k^-1 is to call BN_nnmod if k is out
of range. The entry point to our tuned constant-time curve
implementations is to call BN_nnmod if the scalar has too many bits,
which this causes. The result is both corrections are immediately undone
but cause us to do more variable-time work in the meantime.
Replace all these computations around k with the word-based functions
added in the various preceding CLs. In doing so, replace the BN_mod_mul
calls (which internally call BN_nnmod) with Montgomery reduction. We can
avoid taking k^-1 out of Montgomery form, which combines nicely with
Brian Smith's trick in 3426d10119. Along
the way, we avoid some unnecessary mallocs.
BIGNUM still affects the private key itself, as well as the EC_POINTs.
But this should hopefully be much better now. Also it's 10% faster:
Before:
Did 15000 ECDSA P-224 signing operations in 1069117us (14030.3 ops/sec)
Did 18000 ECDSA P-256 signing operations in 1053908us (17079.3 ops/sec)
Did 1078 ECDSA P-384 signing operations in 1087853us (990.9 ops/sec)
Did 473 ECDSA P-521 signing operations in 1069835us (442.1 ops/sec)
After:
Did 16000 ECDSA P-224 signing operations in 1064799us (15026.3 ops/sec)
Did 19000 ECDSA P-256 signing operations in 1007839us (18852.2 ops/sec)
Did 1078 ECDSA P-384 signing operations in 1079413us (998.7 ops/sec)
Did 484 ECDSA P-521 signing operations in 1083616us (446.7 ops/sec)
Change-Id: I2a25e90fc99dac13c0616d0ea45e125a4bd8cca1
Reviewed-on: https://boringssl-review.googlesource.com/23075
Reviewed-by: Adam Langley <agl@google.com>
mem.h for |OPENSSL_cleanse| and bn/internal.h for things like
|bn_less_than_words| and |bn_correct_top|.
Change-Id: I3c447a565dd9e4f18fb2ff5d59f80564b4df8cea
Reviewed-on: https://boringssl-review.googlesource.com/23164
Reviewed-by: Adam Langley <agl@google.com>
This rewrites the internals with a "words" variant that can avoid
bn_correct_top. It still ultimately calls bn_correct_top as the calling
convention is sadly still BIGNUM, but we can lift that calling
convention out incrementally.
Performance seems to be comparable, if not faster.
Before:
Did 85000 ECDSA P-256 signing operations in 5030401us (16897.3 ops/sec)
Did 34278 ECDSA P-256 verify operations in 5048029us (6790.4 ops/sec)
After:
Did 85000 ECDSA P-256 signing operations in 5021057us (16928.7 ops/sec)
Did 34086 ECDSA P-256 verify operations in 5010416us (6803.0 ops/sec)
Change-Id: I1159746dfcc00726dc3f28396076a354556e6e7d
Reviewed-on: https://boringssl-review.googlesource.com/23065
Reviewed-by: Adam Langley <agl@google.com>
crypto/{asn1,x509,x509v3,pem} were skipped as they are still OpenSSL
style.
Change-Id: I3cd9a60e1cb483a981aca325041f3fbce294247c
Reviewed-on: https://boringssl-review.googlesource.com/19504
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
SHA-512 is faster to calculate on 64-bit systems and that's what we were
using before. (Though, realistically, this doesn't show up at all.)
Change-Id: Id4f386ca0b5645a863b36405eef03bc62d0f29b3
Reviewed-on: https://boringssl-review.googlesource.com/16006
Commit-Queue: David Benjamin <davidben@google.com>
Commit-Queue: Adam Langley <agl@google.com>
Reviewed-by: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
