|BN_mod_exp_mont| should be tested the same way as the other variants,
especially since it is exported.
Change-Id: I8c05725289c0ebcce7aba7e666915c4c1a841c2b
Reviewed-on: https://boringssl-review.googlesource.com/8590
Reviewed-by: David Benjamin <davidben@google.com>
In order to delay the digest of the handshake transcript and unify
around message-based signing callbacks, a copy of the transcript is kept
around until we are sure there is no certificate authentication.
This removes support for SSL_PRIVATE_KEY_METHOD as a client in SSL 3.0.
Change-Id: If8999a19ca021b4ff439319ab91e2cd2103caa64
Reviewed-on: https://boringssl-review.googlesource.com/8561
Reviewed-by: David Benjamin <davidben@google.com>
I'd meant to change the other -latest to -13 when I merged this, but we
may as well group the two together anyway. Also remove ticket_age as
that's likely to go away in PR#503.
Change-Id: Ibb2f447e344d0b13c937291de69ace37ac9a5e8d
Reviewed-on: https://boringssl-review.googlesource.com/8567
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
This replaces the old key_exchange_info APIs and does not require the
caller be aware of the mess around SSL_SESSION management. They
currently have the same bugs around renegotiation as before, but later
work to fix up SSL_SESSION tracking will fix their internals.
For consistency with the existing functions, I've kept the public API at
'curve' rather than 'group' for now. I think it's probably better to
have only one name with a single explanation in the section header
rather than half and half. (I also wouldn't be surprised if the IETF
ends up renaming 'group' again to 'key exchange' at some point. We'll
see what happens.)
Change-Id: I8e90a503bc4045d12f30835c86de64ef9f2d07c8
Reviewed-on: https://boringssl-review.googlesource.com/8565
Reviewed-by: Adam Langley <agl@google.com>
We ended up switching this from a curve to a cipher suite, so the group
ID isn't used. This is in preparation for adding an API for the curve
ID, at which point leaving the protocol constants undefined seems
somewhat bad manners.
Change-Id: Icb8bf4594879dbbc24177551868ecfe89bc2f8c3
Reviewed-on: https://boringssl-review.googlesource.com/8563
Reviewed-by: Adam Langley <agl@google.com>
This isn't filled in on the client and Chromium no longer uses it for
plain RSA. It's redundant with existing APIs. This is part of removing
the need for callers to call SSL_get_session where possible.
SSL_get_session is ambiguous when it comes to renego. Some code wants
the current connection state which should not include the pending
handshake and some code wants the handshake scratch space which should.
Renego doesn't exist in TLS 1.3, but TLS 1.3 makes NewSessionTicket a
post-handshake message, so SSL_get_session is somewhat silly of an API
there too.
SSL_SESSION_get_key_exchange_info is a BoringSSL-only API, so we can
freely change it and replace it with APIs keyed on SSL. In doing so, I
think it is better to provide APIs like "SSL_get_dhe_group_size" and
"SSL_get_curve_id" rather than make the caller do the multi-step
SSL_get_current_cipher / SSL_CIPHER_is_ECDHE dance. To that end, RSA
key_exchange_info is pointless as it can already be determined from the
peer certificate.
Change-Id: Ie90523083d8649701c17934b7be0383502a0caa3
Reviewed-on: https://boringssl-review.googlesource.com/8564
Reviewed-by: Adam Langley <agl@google.com>
QUIC, in particular, will set min_version to TLS 1.3 and has no need to send
any legacy ciphers.
Note this requires changing some test expectations. Removing all of TLS 1.1 and
below's ciphers in TLS 1.3 has consequences for how a tripped minimum version
reads.
BUG=66
Change-Id: I695440ae78b95d9c7b5b921c3cb2eb43ea4cc50f
Reviewed-on: https://boringssl-review.googlesource.com/8514
Reviewed-by: David Benjamin <davidben@google.com>
OpenSSL's SSL_OP_NO_* flags allow discontinuous version ranges. This is a
nuisance for two reasons. First it makes it unnecessarily difficult to answer
"are any versions below TLS 1.3 enabled?". Second the protocol does not allow
discontinuous version ranges on the client anyway. OpenSSL instead picks the
first continous range of enabled versions on the client, but not the server.
This is bizarrely inconsistent. It also doesn't quite do this as the
ClientHello sending logic does this, but not the ServerHello processing logic.
So we actually break some invariants slightly. The logic is also cumbersome in
DTLS which kindly inverts the comparison logic.
First, switch min_version/max_version's storage to normalized versions. Next
replace all the ad-hoc version-related functions with a single
ssl_get_version_range function. Client and server now consistently pick a
contiguous range of versions. Note this is a slight behavior change for
servers. Version-range-sensitive logic is rewritten to use this new function.
BUG=66
Change-Id: Iad0d64f2b7a917603fc7da54c9fc6656c5fbdb24
Reviewed-on: https://boringssl-review.googlesource.com/8513
Reviewed-by: David Benjamin <davidben@google.com>
Bazel wants to know the header files of the targets that it builds too,
so output that in the generated BUILD files.
Change-Id: I5b90908342fc8819ae6bc7ff91eb6f5afc0ddf54
Reviewed-on: https://boringssl-review.googlesource.com/8570
Reviewed-by: David Benjamin <davidben@google.com>
The signing logic itself still depends on pre-hashed messages and will be fixed
in later commits.
Change-Id: I901b0d99917c311653d44efa34a044bbb9f11e57
Reviewed-on: https://boringssl-review.googlesource.com/8545
Reviewed-by: David Benjamin <davidben@google.com>
They're not necessary.
Change-Id: Ifeb3fae73a8b22f88019e6ef9f9ba5e64ed3cfab
Reviewed-on: https://boringssl-review.googlesource.com/8543
Reviewed-by: David Benjamin <davidben@google.com>
Otherwise how would callers know what these functions do!
Change-Id: Icbd8b8b614fede82b8d78068353539c300cbacab
Reviewed-on: https://boringssl-review.googlesource.com/8542
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
This file contains nothing but no-op functions. There's nothing to include.
Change-Id: I3a21207d6a47fab3a00c3f72011abef850ed7b27
Reviewed-on: https://boringssl-review.googlesource.com/8541
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Code search confirms they're never used externally either.
Change-Id: Id90bc15e18555dcfd757b318ab7e2d3ca7c31661
Reviewed-on: https://boringssl-review.googlesource.com/8540
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
As part of the SignatureAlgorithm change in the TLS 1.3 specification,
the existing signature/hash combinations are replaced with a combined
signature algorithm identifier. This change maintains the existing APIs
while fixing the internal representations. The signing code currently
still treats the SignatureAlgorithm as a decomposed value, which will be
fixed as part of a separate CL.
Change-Id: I0cd1660d74ad9bcf55ce5da4449bf2922660be36
Reviewed-on: https://boringssl-review.googlesource.com/8480
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
This file is still kind of a mess, but put the two halves together at least.
Change-Id: Ib21d9c4a7f4864cf80e521f7d0ebec029e5955a1
Reviewed-on: https://boringssl-review.googlesource.com/8502
Reviewed-by: Adam Langley <agl@google.com>
The bc ones will all get replaced later.
Change-Id: Ic1c6ee320b3a5689c7dadea3f483bd92f7e39612
Reviewed-on: https://boringssl-review.googlesource.com/8528
Reviewed-by: Adam Langley <agl@google.com>
These can all share one test type. Note test_div had a separate
division by zero test which had to be extracted.
BUG=31
Change-Id: I1de0220fba78cd7f82a5dc96adb34b79c07929e9
Reviewed-on: https://boringssl-review.googlesource.com/8527
Reviewed-by: Adam Langley <agl@google.com>
crypto/bn/bn_test.cc:404:44: error: ‘n’ may be used uninitialized in this
function [-Werror=maybe-uninitialized]
Change-Id: Id590dfee4b9ae1a4fbd0965e133310dac0d06ed3
Two of these were even regression tests for a past bug. These are also
moved to the file, now with the amazing innovation that we *actually
check the regression test gave the right answer*.
BUG=31
Change-Id: I8097336ad39a2bb5c0af07dd8e1e34723b68d182
Reviewed-on: https://boringssl-review.googlesource.com/8525
Reviewed-by: Adam Langley <agl@google.com>
This adds tests for:
for i = 0 to 199:
Sum: 2^i
A: 2^i - 1
B: 1
for i = 0 to 199:
Sum: 2^200
A: 2^200 - 2^i
B: 2^i
I don't believe any of the existing tests actually stressed this,
amazingly enough.
Change-Id: I5edab6327bad45fc21c62bd47f4169f8bb745ff7
Reviewed-on: https://boringssl-review.googlesource.com/8523
Reviewed-by: Adam Langley <agl@google.com>
This took some finesse. I merged the lshift1 and rshift1 test vectors as
one counted down and the other up. The rshift1 vectors were all rounded
to even numbers, with the test handling the odd case. Finally, each run
only tested positive or negative (it wasn't re-randomized), so I added
both positive and negative versions of each test vector.
BUG=31
Change-Id: Ic7de45ab797074547c44c2e4ff8089b1feec5d57
Reviewed-on: https://boringssl-review.googlesource.com/8522
Reviewed-by: Adam Langley <agl@google.com>
MSVC 2015 seems to support it just fine.
Change-Id: I9c91c18c260031e6024480d1f57bbb334ed7118c
Reviewed-on: https://boringssl-review.googlesource.com/8501
Reviewed-by: Adam Langley <agl@google.com>
buffer buffer buffer buffer buffer. At some point, words lose their meaning if
they're used too many times. Notably, the DTLS code can't decide whether a
"buffered message" is an incoming message to be reassembled or an outgoing
message to be (re)transmitted.
Change-Id: Ibdde5c00abb062c603d21be97aff49e1c422c755
Reviewed-on: https://boringssl-review.googlesource.com/8500
Reviewed-by: Adam Langley <agl@google.com>
This allows us to use CBB for all handshake messages. Now, SSL_PROTOCOL_METHOD
is responsible for implementing a trio of CBB-related hooks to assemble
handshake messages.
Change-Id: I144d3cac4f05b6637bf45d3f838673fc5c854405
Reviewed-on: https://boringssl-review.googlesource.com/8440
Reviewed-by: Adam Langley <agl@google.com>
Test vectors taken from one run of bc_test with the -bc flag, along with
a handful of manual test vectors around numbers close to zero. (The
output was compared against bc to make sure it was correct.)
BUG=31
Change-Id: I9e9263ece64a877c8497716cd4713b4c3e44248c
Reviewed-on: https://boringssl-review.googlesource.com/8521
Reviewed-by: Adam Langley <agl@google.com>
Upstream added new instructions in
f4d456408d9d7bca31f34765d1a05fbd9fa55826 and
4e3d2866b6e8e7a700ea22e05840a093bfd7a4b1.
Change-Id: I835650426a0dffca2d8686d64aef99097a4bd186
Reviewed-on: https://boringssl-review.googlesource.com/8520
Reviewed-by: Adam Langley <agl@google.com>
(Imported from upstream's 67b8bf4d849a7c40d0226de4ebe2590c4cc7c1f7.)
Verified a no-op in generate_build_files.py.
Change-Id: I09648893ab5c795f3934da0b2ecbc5fd7eb068d5
Reviewed-on: https://boringssl-review.googlesource.com/8519
Reviewed-by: Adam Langley <agl@google.com>
Depending on architecture, perlasm differed on which one or both of:
perl foo.pl flavor output.S
perl foo.pl flavor > output.S
Upstream has now unified on the first form after making a number of
changes to their files (the second does not even work for their x86
files anymore). Sync those portions of our perlasm scripts with upstream
and update CMakeLists.txt and generate_build_files.py per the new
convention.
This imports various commits like this one:
184bc45f683c76531d7e065b6553ca9086564576 (this was done by taking a
diff, so I don't have the full list)
Confirmed that generate_build_files.py sees no change.
BUG=14
Change-Id: Id2fb5b8bc2a7369d077221b5df9a6947d41f50d2
Reviewed-on: https://boringssl-review.googlesource.com/8518
Reviewed-by: Adam Langley <agl@google.com>
We're not using the masm output (and upstream does not even support it).
Reduce unnecessary diff from upstream.
Change-Id: Ic0b0f804bd7ec1429b3b1f40746297b57dcfcef6
Reviewed-on: https://boringssl-review.googlesource.com/8517
Reviewed-by: Adam Langley <agl@google.com>
OBJ_NAME in OpenSSL has an 'alias' field which some code consumes. We never
report anything OpenSSL considers an alias, so just leave it zero. It also has
a 'data' field which, confusingly, is a pointer to the EVP_CIPHER or EVP_MD
despite being a char pointer.
See calls to and implementation of OBJ_NAME_add in OpenSSL for comparison.
Change-Id: Ifc5c70424569db8783deb2fda7736c1954b5dd3a
Reviewed-on: https://boringssl-review.googlesource.com/8515
Reviewed-by: Adam Langley <agl@google.com>
It was missing. Writing NewSessionTicket will need it.
Change-Id: I39de237894f2e8356bd6861da2b8a4d805dcd2d6
Reviewed-on: https://boringssl-review.googlesource.com/8439
Reviewed-by: Adam Langley <agl@google.com>
It has size 7. There's no need for a priority queue structure, especially one
that's O(N^2) anyway.
Change-Id: I7609794aac1925c9bbf3015744cae266dcb79bff
Reviewed-on: https://boringssl-review.googlesource.com/8437
Reviewed-by: Adam Langley <agl@google.com>
The pair was a remnant of some weird statefulness and also ChangeCipherSpec
having a "sequence number" to make the pqueue turn into an array.
Change-Id: Iffd82594314df43934073bd141faee0fc167ed5f
Reviewed-on: https://boringssl-review.googlesource.com/8436
Reviewed-by: Adam Langley <agl@google.com>
Now that retransitting is a lot less stateful, a lot of surrounding code can
lose statefulness too. Rather than this overcomplicated pqueue structure,
hardcode that a handshake flight is capped at 7 messages (actually, DTLS can
only get up to 6 because we don't support NPN or Channel ID in DTLS) and used a
fixed size array.
This also resolves several TODOs.
Change-Id: I2b54c3441577a75ad5ca411d872b807d69aa08eb
Reviewed-on: https://boringssl-review.googlesource.com/8435
Reviewed-by: Adam Langley <agl@google.com>
Post-handshake retransmit in DTLS no longer needs that scratch space.
Change-Id: I2f070675d72426e61b19dab5bcac40bf62b8fd8d
Reviewed-on: https://boringssl-review.googlesource.com/8434
Reviewed-by: Adam Langley <agl@google.com>
Now dtls1_do_handshake_write takes in a serialized form of the full message and
writes it. It's a little weird to serialize and deserialize the header a bunch,
but msg_callback requires that we keep the full one around in memory anyway.
Between that and the handshake hash definition, DTLS really wants messages to
mean the assembled header, redundancies and all, so we'll just put together
messages that way.
This also fixes a bug where ssl_do_msg_callback would get passed in garbage
where the header was supposed to be. The buffered messages get sampled before
writing the fragment rather than after.
Change-Id: I4e3b8ce4aab4c4ab4502d5428dfb8f3f729c6ef9
Reviewed-on: https://boringssl-review.googlesource.com/8433
Reviewed-by: Adam Langley <agl@google.com>
It is an explicit copy of something, but it's a lot easier to reason about than
the init_buf/init_num gynmastics we were previously doing. This is along the
way to getting init_buf out of here.
Change-Id: Ia1819ba9db60ef6db09dd60d208dbc95fcfb4bd2
Reviewed-on: https://boringssl-review.googlesource.com/8432
Reviewed-by: Adam Langley <agl@google.com>
The only thing we've written before the signature is the hash. We can just
choose it anew. This is along the way to getting init_buf out of the handshake
output side. (init_buf is kind of a mess since it doesn't integrate nicely with
a top-level CBB. Some of the logic hasn't been converted to CBB because they're
interspersed with a BUF_MEM_grow.)
Change-Id: I693e834b5a03849bebb04f3f6b81f81fb04e2530
Reviewed-on: https://boringssl-review.googlesource.com/8431
Reviewed-by: Adam Langley <agl@google.com>
It doesn't really convey anything useful. Leave ssl_get_message alone for now
since it's called everywhere in the handshake and I'm about to tweak it
further.
Change-Id: I6f3a74c170e818f624be8fbe5cf6b796353406df
Reviewed-on: https://boringssl-review.googlesource.com/8430
Reviewed-by: Adam Langley <agl@google.com>
Saves us some mess if they're never zero. This also fixes a bug in
ssl3_get_max_client_version where it didn't account for all versions being
disabled properly.
Change-Id: I4c95ff57cf8953cb4a528263b252379f252f3e01
Reviewed-on: https://boringssl-review.googlesource.com/8512
Reviewed-by: David Benjamin <davidben@google.com>
Otherwise if the client's ClientHello logic is messed up and ServerHello is
fine, we won't notice.
Change-Id: I7f983cca45f7da1113ad4a72de1f991115e1b29a
Reviewed-on: https://boringssl-review.googlesource.com/8511
Reviewed-by: David Benjamin <davidben@google.com>
