This avoids needing a should_add_to_finished_hash boolean on do_write. The
logic in do_write was a little awkward because do_write would be called
multiple times if the write took several iterations. This also gets complex if
DTLS retransmits are involved. (At a glance, it's not obvious the
BIO_CTRL_DGRAM_MTU_EXCEEDED case actually works.)
Doing it as the handshake message is being prepared avoids this concern. It
also gives a natural point for the extended master secret logic which needs to
do work after the finished hash has been sampled.
As a bonus, we can remove s->d1->retransmitting which was only used to deal
with this issue.
Change-Id: Ifedf23ee4a6c5e08f960d296a6eb1f337a16dc7a
Reviewed-on: https://boringssl-review.googlesource.com/2604
Reviewed-by: Adam Langley <agl@google.com>
The frag_off/frag_len parameters are always zero, and the return value is never
used.
Change-Id: If7487b23c55f2a996e411b25b76a8e1651f25d8b
Reviewed-on: https://boringssl-review.googlesource.com/2601
Reviewed-by: Adam Langley <agl@google.com>
David is heading out so I didn't want to block the previous batch of
changes for weeks. Thus I landed them as-is and this change tweaks a
couple of things that would normally have been addressed in code-review.
Change-Id: I2579dbc43d93fea34a52b4041f5511d70217aaf7
This makes SSLv23_method go through DTLS_ANY_VERSION's version negotiation
logic. This allows us to get rid of duplicate ClientHello logic. For
compatibility, SSL_METHOD is now split into SSL_PROTOCOL_METHOD and a version.
The legacy version-locked methods set min_version and max_version based this
version field to emulate the original semantics.
As a bonus, we can now handle fragmented ClientHello versions now.
Because SSLv23_method is a silly name, deprecate that too and introduce
TLS_method.
Change-Id: I8b3df2b427ae34c44ecf972f466ad64dc3dbb171
Tested manually by replacing SSLv23_method() with TLSv1_2_method() in
bssl_shim. This is a large chunk of code which is not run in SSLv23_method(),
but it will be run after unification. It's split out separately to ease review.
Change-Id: I6bd241daca17aa0f9b3e36e51864a29755a41097
SSL3_ENC_METHOD will remain version-specific while SSL_METHOD will become
protocol-specific. This finally removes all the version-specific portions of
SSL_METHOD but the version tag itself.
(SSL3_ENC_METHOD's version-specific bits themselves can probably be handled by
tracking a canonicalized protocol version. It would simplify version
comparisons anyway. The one catch is SSLv3 has a very different table. But
that's a cleanup for future. Then again, perhaps a version-specific method
table swap somewhere will be useful later for TLS 1.3.)
Much of this commit was generated with sed invocation:
s/method->ssl3_enc/enc_method/g
Change-Id: I2b192507876aadd4f9310240687e562e56e6c0b1
Reviewed-on: https://boringssl-review.googlesource.com/2581
Reviewed-by: Adam Langley <agl@google.com>
Now SSLv23 and DTLS_ANY_VERSION share version-related helper functions.
ssl3_get_method is temporary until the method switch is no longer necessary.
Put them all together so there's one place to refactor them when we add a new
version or implement min_version/max_version controls.
Change-Id: Ic28a145cad22db08a87fdb854480b22886c451c6
Reviewed-on: https://boringssl-review.googlesource.com/2580
Reviewed-by: Adam Langley <agl@google.com>
They're always known now. Also fix the SSLv23_{client,server}_method
definitions still had their own macro invocations.
Change-Id: Ia13f29a27f2331d25a4051e83f2d5abc62fab981
Reviewed-on: https://boringssl-review.googlesource.com/2562
Reviewed-by: Adam Langley <agl@google.com>
There's an undefined one not used anywhere. The others ought to be const. Also
move the forward declaration to ssl.h so we don't have to use the struct name.
Change-Id: I76684cf65255535c677ec19154cac74317c289ba
Reviewed-on: https://boringssl-review.googlesource.com/2561
Reviewed-by: Adam Langley <agl@google.com>
(Imported from upstream's 4b87706d20f0a2fdf2e8f1b90256e141c487ef47 and
eceef8fb865eb5de329b27ea472d4fdea4c290fe.)
Dead code.
Change-Id: I58120c3a9c42cb9db27f404774778222c3bb642a
Reviewed-on: https://boringssl-review.googlesource.com/2479
Reviewed-by: Adam Langley <agl@google.com>
Some code predated the RFCs themselves, but the RFCs now exist. Also remove
now obsolete comments and some unused #defines.
See upstream's cffeacd91e70712c99c431bf32a655fa1b561482. (Though this predates
it; I just remembered I never uploaded it.)
Change-Id: I5e56f0ab6b7f558820f72e84dfdbc71a8c23cb91
Reviewed-on: https://boringssl-review.googlesource.com/2475
Reviewed-by: Adam Langley <agl@google.com>
Replace the comment with a clearer one and reimplement it much more tidily. The
mask thing was more complicated than was needed.
This slightly changes behavior on the DTLS_ANY_VERSION side in that, if only
one method is enabled, we no longer short-circuit to the version-locked method
early. This "optimization" seems unnecessary.
Change-Id: I571c8b60ed16bd4357c67d65df0dd1ef9cc5eb57
Reviewed-on: https://boringssl-review.googlesource.com/2451
Reviewed-by: Adam Langley <agl@google.com>
We intend to deprecate the version-locked methods and unify them. Don't expose
that there's a method swap. (The existing version-locked methods will merely be
a shorthand for configuring minimum/maximum versions.)
There is one consumer of SSL_get_ssl_method in internal code, but it's just
some logging in test-only code. All it's doing is getting the version as a
string which should be SSL_get_version instead.
While here, also remove dead ssl_bad_method function. Also the bogus
ssl_crock_st forward-declaration. The forward declaration in base.h should be
perfectly sufficient.
Change-Id: I50480808f51022e05b078a285f58ec85d5ad7c8e
Reviewed-on: https://boringssl-review.googlesource.com/2408
Reviewed-by: Adam Langley <agl@google.com>
This is a bit of cleanup that probably should have been done at the same time
as 30ddb434bf.
For now, version negotiation is implemented with a method swap. It also
performs this swap on SSL_set_session, but this was neutered in
30ddb434bf. Rather than hackishly neuter it,
remove it outright. In addition, remove SSL_set_ssl_method. Now all method
swaps are internal: SSLv23_method switch to a version-specific method and
SSL_clear undoing it.
Note that this does change behavior: if an SSL* is created with one
version-specific method and we SSL_set_session to a session from a /different/
version, we would switch to the /other/ version-specific method. This is
extremely confusing, so it's unlikely anyone was actually expecting it.
Version-specific methods in general don't work well.
Change-Id: I72a5c1f321ca9aeb1b52ebe0317072950ba25092
Reviewed-on: https://boringssl-review.googlesource.com/2390
Reviewed-by: Adam Langley <agl@google.com>
This commit fixes a number of crashes caused by malloc failures. They
were found using the -malloc-test=0 option to runner.go which runs tests
many times, causing a different allocation call to fail in each case.
(This test only works on Linux and only looks for crashes caused by
allocation failures, not memory leaks or other errors.)
This is not the complete set of crashes! More can be found by collecting
core dumps from running with -malloc-test=0.
Change-Id: Ia61d19f51e373bccb7bc604642c51e043a74bd83
Reviewed-on: https://boringssl-review.googlesource.com/2320
Reviewed-by: Adam Langley <agl@google.com>
tls1_process_sigalgs now only determines the intersection between the peer
algorithms and those configured locally. That list is queried later to
determine the hash algorithm to use when signing CertificateVerify or
ServerKeyExchange.
This is needed to support client auth on Windows where smartcards or CAPI may
not support all hash functions.
As a bonus, this does away with more connection-global state. This avoids the
current situation where digests are chosen before keys are known (for
CertificateVerify) or for slots that don't exist.
Change-Id: Iec3619a103d691291d8ebe08ef77d574f2faf0e8
Reviewed-on: https://boringssl-review.googlesource.com/2280
Reviewed-by: Adam Langley <agl@google.com>
CERT_PKEY_SIGN isn't meaningful since, without strict mode, we always fall back
to SHA-1 anyway. So the digest is never NULL when CERT_PKEY_SIGN is computed.
The entire valid_flags is now back to it's pre-1.0.2 check of seeing if the
certificate and key are configured.
This finally removes the sensitivity between valid_flags and selecting the
digest, so we can defer choosing the digest all we like.
Change-Id: I9f9952498f512d7f0cc799497f7c5b52145a48af
Reviewed-on: https://boringssl-review.googlesource.com/2288
Reviewed-by: Adam Langley <agl@google.com>
It doesn't depend on the cipher now that export ciphers are gone. It need only
be called once. Also remove the valid bit; nothing ever reads it. Its output is
also only used within a function, so make mask_k and mask_a local variables.
So all the configuration-based checks are in one place, change the input
parameter from CERT to SSL and move the PSK and ECDHE checks to the mask
computation. This avoids having to evaluate the temporary EC key for each
cipher.
The remaining uses are on the client which uses them differently (disabled
features rather than enabled ones). Those too may as well be local variables,
so leave a TODO.
Change-Id: Ibcb574341795d4016ea749f0290a793eed798874
Reviewed-on: https://boringssl-review.googlesource.com/2287
Reviewed-by: Adam Langley <agl@google.com>
Many are now unused. Only two are currently considered in cipher selection:
CERT_PKEY_VALID and CERT_PKEY_SIGN. (As per previous commits, this is either
bizarre due to limited slots or redundant with ssl_early_callback_ctx. We can
probably prune this too.)
This also fixes a bug where DTLS 1.0 went through a TLS 1.2 codepath. As the
DTLS code is currently arranged, all version comparisons must be done via
macros like SSL_USE_SIGALGS. (Probably we should add functions to map from DTLS
to TLS versions and slowly move the library to using the TLS version as
in-memory representation.)
Change-Id: I89bcf5b7b9ea5cdecf54f4445156586377328fe0
Reviewed-on: https://boringssl-review.googlesource.com/2286
Reviewed-by: Adam Langley <agl@google.com>
It's new in OpenSSL 1.0.2 so it's never set by existing code. This removes gobs
and gobs of complexity from tls1_check_chain. It only checks the local
certificate, not the peer certificate. The uses appear to be:
- Sanity-check configuration. Not worth the complexity.
- Guide in selecting ciphers based on ClientHello parameters and which
certificates in the CERT_PKEY are compatible. This isn't very useful one its
own since the CERT_PKEY array only stores one slot per type (e.g. you cannot
configure RSA/SHA-1 and RSA/SHA-256).
- For the (currently removed) SSL_check_chain to return more information based
on ClientHello parameters and guide selecting a certificate. This is
potentially useful but, as noted in the commit which removed it, redundant
with ssl_early_callback_ctx.
This CL is largely mechanical removing of dead codepaths. The follow-up will
clean up the now unnecessary parts of this function.
Change-Id: I2ebfa17e4f73e59aa1ee9e4ae7f615af2c6cf590
Reviewed-on: https://boringssl-review.googlesource.com/2285
Reviewed-by: Adam Langley <agl@google.com>
Both of these are newly-exported in OpenSSL 1.0.2, so they cannot be used by
current consumers.
This was added in upstream's 18d7158809c9722f4c6d2a8af7513577274f9b56 to
support custom selection of certificates. The intent seems to be that you
listen to cert_cb and use SSL_check_chain to lean on OpenSSL to process
signature algorithms list for you.
Unfortunately, the implementation is slightly suspect: it uses the same
function as the codepath which mutates and refers to the CERT_PKEY of the
matching type. Some access was guarded by check_flags, but this is too
complex. Part of it is also because the matching digest is selected early and
we intend to connect this to EVP_PKEY_supports_digest so it is no longer a
property of just the key type.
Let's remove the hook for now, to unblock removing a lot of complexity. After
cleaning up this area, a function like this could be cleaner to support, but
we already have a version of this: select_certificate_cb and
ssl_early_callback_ctx.
Change-Id: I3add425b3996e5e32d4a88e14cc607b4fdaa5aec
Reviewed-on: https://boringssl-review.googlesource.com/2283
Reviewed-by: Adam Langley <agl@google.com>
Server-side support was removed in 77a942b7fe,
but client-side support was retained as it appeared NSS supported this.
However, this is not the case: ssl3_HandleServerKeyExchange only allows a
ServerKeyExchange message if hs.ws is in an appropriate state.
ssl3_AuthCertificate only sets it to allow ServerKeyExchange if it is a key
exchange that normally uses it or if is_limited is set. is_limited is only set
for the export cipher suites.
Thus we can safely remove this without waiting on gathering UMA data.
BUG=chromium:400587
Change-Id: I9aefb742dbb2d99c13340ab48017e1ceee04bc2f
Reviewed-on: https://boringssl-review.googlesource.com/2230
Reviewed-by: Adam Langley <agl@google.com>
There's only one caller and it doesn't use that feature. While I'm here, tidy
that function a little. Don't bother passing FALLBACK_SCSV into
ssl3_get_cipher_by_value.
Change-Id: Ie71298aeaaab6e24401e0a6c2c0d2281caa93ba4
Reviewed-on: https://boringssl-review.googlesource.com/2030
Reviewed-by: Adam Langley <agl@google.com>
This avoids the strange optional parameter thing by moving it to the client.
Also document what the functions should do.
Change-Id: I361266acadedfd2bfc4731f0900821fc2c2f954d
Reviewed-on: https://boringssl-review.googlesource.com/1843
Reviewed-by: Adam Langley <agl@google.com>
The TLS-specific hooks have been removed. We aim to no longer perform version
negotiation as a pre-processing step, so ensure the only differences to worry
about are the version, get_method hook, and the enc_data.
BUG=chromium:403378
Change-Id: I628ec6f4c50ceed01d7af8f4110b6dc95cfbe023
Reviewed-on: https://boringssl-review.googlesource.com/1841
Reviewed-by: Adam Langley <agl@google.com>
Still need to convert serializing code to CBB, but the current one is kinda
crazy.
Change-Id: I00e12a812c815bf01c53a26ccbb7c6727ea8c8fc
Reviewed-on: https://boringssl-review.googlesource.com/1840
Reviewed-by: Adam Langley <agl@google.com>
Splitting the strength mask between SSL_EXP_MASK and SSL_STRONG_MASK no longer
does anything. Also remove the SSL_NOT_EXP bit and condense the strength bits.
Change-Id: I9e61acdde008c3ce06bb37f78a72099fc53ed080
Reviewed-on: https://boringssl-review.googlesource.com/1757
Reviewed-by: Adam Langley <agl@google.com>
Simplify all the cipher gathering logic. The set of supported ciphers is known,
so there is no need to determine if some cipher exists but doesn't work.
Change-Id: Idcaae67e7bfc40a3deb925d85ee1a99a931b67e7
Reviewed-on: https://boringssl-review.googlesource.com/1756
Reviewed-by: Adam Langley <agl@google.com>
Configures the SSL stack to log session information to a BIO. The intent is to
support NSS's SSLKEYLOGFILE environment variable. Add support for the same
environment variable to tool/client.cc.
Tested against Wireshark 1.12.0.
BUG=393477
Change-Id: I4c231f9abebf194eb2df4aaeeafa337516774c95
Reviewed-on: https://boringssl-review.googlesource.com/1699
Reviewed-by: Adam Langley <agl@google.com>
Remove the old implementation which was excessively general. This mirrors the
SCT support and adds a single boolean flag to request an OCSP response with no
responder IDs, extensions, or frills. The response, if received, is stored on
the SSL_SESSION so that it is available for (re)validation on session
resumption; Chromium revalidates the saved auth parameters on resume.
Server support is unimplemented for now. This API will also need to be adjusted
in the future if we implement RFC 6961.
Change-Id: I533c029b7f7ea622d814d05f934fdace2da85cb1
Reviewed-on: https://boringssl-review.googlesource.com/1671
Reviewed-by: Adam Langley <agl@google.com>
Get all this stuff out of the way.
- OPENSSL_NO_MD5
- OPENSSL_NO_SHA
- OPENSSL_NO_EC
- OPENSSL_NO_ECDSA
- OPENSSL_NO_ECDH
- OPENSSL_NO_NEXTPROTONEG
- OPENSSL_NO_DH
- OPENSSL_NO_SSL3
- OPENSSL_NO_RC4
- OPENSSL_NO_RSA
Also manually removed a couple instances of OPENSSL_NO_DSA that seemed to be
confused anyway. Did some minor manual cleanup. (Removed a few now-pointless
'if (0)'s.)
Change-Id: Id540ba97ee22ff2309ab20ceb24c7eabe766d4c4
Reviewed-on: https://boringssl-review.googlesource.com/1662
Reviewed-by: Adam Langley <agl@google.com>
This moves CertificateVerify digest processing to the new
SSL_GET_MESSAGE_DONT_HASH_MESSAGE flag. It also refactors it similarly to
ssl3_send_cert_verify and moves that logic to a common ssl3_cert_verify_hash
function to compute the handshake hash.
This removes a large chunk of duplicate (and divergent!) logic between TLS and
DTLS. It also removes TLS1_FLAGS_KEEP_HANDSHAKE.
Change-Id: Ia63c94f7d76d901bc9c4c33454fbfede411adf63
Reviewed-on: https://boringssl-review.googlesource.com/1633
Reviewed-by: Adam Langley <agl@google.com>
This replaces the special-case in ssl3_get_message for Channel ID. Also add
ssl3_hash_current_message to hash the current message, taking TLS vs DTLS
handshake header size into account.
One subtlety with this flag is that a message intended to be processed with
SSL_GET_MESSAGE_DONT_HASH_MESSAGE cannot follow an optional message
(reprocessed with reuse_message, etc.). There is an assertion to that effect.
If need be, we can loosen it to requiring that the preceeding optional message
also pass SSL_GET_MESSAGE_DONT_HASH_MESSAGE and then maintain some state to
perform the more accurate assertion, but this is sufficient for now.
Change-Id: If8c87342b291ac041a35885b9b5ee961aee86eab
Reviewed-on: https://boringssl-review.googlesource.com/1630
Reviewed-by: Adam Langley <agl@google.com>
It doesn't appear to have ever been implemented on the client. The server code
stopped working anyway because it now skips the ssl_get_message call, so we
never cash in on the reuse_message, attempt to reprocess the repeated
ClientHello, and reject it thinking it's a second MS SGC restart.
Change-Id: Id536846e08460143f6fc0a550bdcc1b26b506b04
Reviewed-on: https://boringssl-review.googlesource.com/1580
Reviewed-by: Adam Langley <agl@google.com>
Remove all the logic managing key types that aren't being used anymore.
Change-Id: I101369164588048e64ba1c84a6b8aac8f3a221cd
Reviewed-on: https://boringssl-review.googlesource.com/1567
Reviewed-by: Adam Langley <agl@google.com>
DSA is not connected up to EVP, so it wouldn't work anyway. We shouldn't
advertise a cipher suite we don't support. Chrome UMA data says virtually no
handshakes end up negotiating one of these.
Change-Id: I874d934432da6318f05782ebd149432c1d1e5275
Reviewed-on: https://boringssl-review.googlesource.com/1566
Reviewed-by: Adam Langley <agl@google.com>
These are the variants where the CA signs a Diffie-Hellman keypair. They are
not supported by Chrome on NSS.
Change-Id: I569a7ac58454bd3ed1cd5292d1f98499012cdf01
Reviewed-on: https://boringssl-review.googlesource.com/1564
Reviewed-by: Adam Langley <agl@google.com>
This also removes the 'LOW' strength class.
Change-Id: Iffd2356dadb4a4875c1547a613d51061101358fd
Reviewed-on: https://boringssl-review.googlesource.com/1562
Reviewed-by: Adam Langley <agl@google.com>
NULL, SRP, CAMELLIA, export ciphers, SSLv2, IDEA, and SEED are gone. Unknown
directives are silently ignored in the parser, so there is no need to retain
their masks and entries in the cipher suite aliases.
Change-Id: If43b9cbce56b3e1c401db764b88996940452a300
Reviewed-on: https://boringssl-review.googlesource.com/1561
Reviewed-by: Adam Langley <agl@google.com>
This lets us put the SSL_CIPHER table in the data section. For type-checking,
make STACK_OF(SSL_CIPHER) cast everything to const SSL_CIPHER*.
Note that this will require some changes in consumers which weren't using a
const SSL_CIPHER *.
Change-Id: Iff734ac0e36f9e5c4a0f3c8411c7f727b820469c
Reviewed-on: https://boringssl-review.googlesource.com/1541
Reviewed-by: Adam Langley <agl@google.com>
Of the remaining implementations left, ssl3_, dtls1_, and ssl23_, dtls1_ is
redundant and can be folded into ssl3_. ssl23_ actually isn't; it sets 5
minutes rather than 2 hours. Two hours seems to be what everything else uses
and seems a saner default. Most consumers seem to override it anyway
(SSL_CTX_set_timeout). But it is a behavior change.
The method is called at two points:
- SSL_get_default_timeout
- SSL_CTX_new
Incidentally, the latter call actually makes the former never called internally
and the value it returns a lie. SSL_get_default_timeout returns the default
timeout of the /current/ method, but in ssl_get_new_session, the timeout is
shadowed by session_timeout on the context. That is initialized when
SSL_CTX_new is called. So, unless you go out of your way to
SSL_CTX_set_timeout(0), it always overrides. (And it actually used to a
difference because, for SSL23, the SSL_CTX's method is SSL23, but, when session
creation happens, the SSL's method is the version-specific one.)
Change-Id: I331d3fd69b726242b36492402717b6d0b521c6ee
Reviewed-on: https://boringssl-review.googlesource.com/1521
Reviewed-by: Adam Langley <agl@google.com>
It was added in OpenSSL 1.0.2, so nothing can be depending on it yet. If we
really want a Suite B profile, it seems better to generate a configuration for
the rest of the system rather than pepper the codebase with checks.
Change-Id: I1be3ebed0e87cbfe236ade4174dcf5bbc7e10dd5
Reviewed-on: https://boringssl-review.googlesource.com/1517
Reviewed-by: Adam Langley <agl@google.com>
The protocols are pretty similar; they were all basically redundant. The free
of s->tlsext_session_ticket (more fallout from the EAP-FAST patch) was moved to
SSL_free because that object's attached to s, not s->s3. This is relevant if
SSL_set_ssl_method gets called.
Change-Id: I14a896ba8a6a2c34ab1cb5f65311b117051228da
Reviewed-on: https://boringssl-review.googlesource.com/1509
Reviewed-by: Adam Langley <agl@google.com>
Windows doesn't have ssize_t, sadly. There's SSIZE_T, but defining an
OPENSSL_SSIZE_T seems worse than just using an int.
Change-Id: I09bb5aa03f96da78b619e551f92ed52ce24d9f3f
Reviewed-on: https://boringssl-review.googlesource.com/1352
Reviewed-by: Adam Langley <agl@google.com>
The memory freelist maintained by OpenSSL claims to be a performance
optimization for platforms that have a slow malloc/free
implementation. This should not be the case on modern
linux/glibc. Remove the freelist as it poses a potential security
hazard of buffer-reuse that is of "initialized" memory that will not
be caught be tools such as valgrind.
Change-Id: I3cfa6a05f9bdfbbba7820060bae5a673dee43014
Reviewed-on: https://boringssl-review.googlesource.com/1385
Reviewed-by: Adam Langley <agl@google.com>
The code guarded by PKCS1_CHECK appears to be unhelpful, and the guard
is explicitly undefined in ssl_locl.h Remove both.
Change-Id: I3cd45a744a8f35b02181b1e48fd1ef11af5e6f4a
Reviewed-on: https://boringssl-review.googlesource.com/1383
Reviewed-by: Adam Langley <agl@google.com>
