This change stores the size of the group/modulus (for RSA/DHE) or curve
ID (for ECDHE) in the |SSL_SESSION|. This makes it available for UIs
where desired.
Change-Id: I354141da432a08f71704c9683f298b361362483d
Reviewed-on: https://boringssl-review.googlesource.com/5280
Reviewed-by: Adam Langley <agl@google.com>
In the ancient times, before ex_data and OpenSSL, SSLeay supported a
single app_data slot in various types. Later app_data begat ex_data, and
app_data was replaced by compatibility macros to ex_data index zero.
Today, app_data is still in use, but ex_data never reserved index zero
for app_data. This causes some danger where, if the first ex_data
registration did not use NULL callbacks, the registration's callbacks
would collide with app_data.
Instead, add an option to the types with app_data to reserve index zero.
Also switch SSL_get_ex_data_X509_STORE_CTX_idx to always return zero
rather than allocate a new one. It used to be that you used
X509_STORE_CTX_get_app_data. I only found one consumer that we probably
don't care about, but, to be safe and since it's easy, go with the
conservative option. (Although SSL_get_ex_data_X509_STORE_CTX_idx wasn't
guaranteed to alias app_data, in practice it always did. No consumer
ever calls X509_STORE_CTX_get_ex_new_index.)
Change-Id: Ie75b279d60aefd003ffef103f99021c5d696a5e9
Reviewed-on: https://boringssl-review.googlesource.com/5313
Reviewed-by: Adam Langley <agl@google.com>
It (incorrectly) thinks some variables are uninitialized. It also gets confused
about some const parameters.
Change-Id: Ie2b3a5336692e7293cf03d6a4cd5345d30b628b3
Reviewed-on: https://boringssl-review.googlesource.com/5330
Reviewed-by: Adam Langley <agl@google.com>
Use more sensible variable names. Also move some work between the helpers and
s3_srvr.c a little; the session lookup functions now only return a new session.
Whether to send a ticket is now an additional output to avoid the enum
explosion around renewal. The actual SSL state is not modified.
This is somewhat cleaner as s3_srvr.c may still reject a session for other
reasons, so we avoid setting ssl->session and ssl->verify_result to a session
that wouldn't be used. (They get fixed up in ssl_get_new_session, so it didn't
actually matter.)
Change-Id: Ib52fabbe993b5e2b7408395a02cdea3dee66df7b
Reviewed-on: https://boringssl-review.googlesource.com/5235
Reviewed-by: Adam Langley <agl@google.com>
Otherwise another thread may cause the session to be destroyed first.
Change-Id: I2084a28ece11540e1b8f289553161d99395e2d1f
Reviewed-on: https://boringssl-review.googlesource.com/5231
Reviewed-by: Adam Langley <agl@google.com>
|SSL_CTX| and |X509_STORE| have grown their own locks. Several static
locks have been added to hack around not being able to use a
|CRYPTO_once_t| in public headers. Lastly, support for calling
|SSL_CTX_set_generate_session_id| concurrently with active connections
has been removed. No other property of an |SSL_CTX| works like that.
Change-Id: Iff5fe3ee3fdd6ea9c9daee96f850b107ad8a6bca
Reviewed-on: https://boringssl-review.googlesource.com/4775
Reviewed-by: Adam Langley <agl@google.com>
Convert reference counts in ssl/ to use |CRYPTO_refcount_t|.
Change-Id: I5d60f641b0c89b1ddfe38bfbd9d7285c60377f4c
Reviewed-on: https://boringssl-review.googlesource.com/4773
Reviewed-by: Adam Langley <agl@google.com>
clang-format got a little confused there.
Change-Id: I46df523e8a7813a2b4e243da3df22851b3393873
Reviewed-on: https://boringssl-review.googlesource.com/4614
Reviewed-by: Adam Langley <agl@google.com>
Instead, each module defines a static CRYPTO_EX_DATA_CLASS to hold the values.
This makes CRYPTO_cleanup_all_ex_data a no-op as spreading the
CRYPTO_EX_DATA_CLASSes across modules (and across crypto and ssl) makes cleanup
slightly trickier. We can make it do something if needbe, but it's probably not
worth the trouble.
Change-Id: Ib6f6fd39a51d8ba88649f0fa29c66db540610c76
Reviewed-on: https://boringssl-review.googlesource.com/4375
Reviewed-by: Adam Langley <agl@google.com>
Callers are required to use the wrappers now. They still need OPENSSL_EXPORT
since crypto and ssl get built separately in the standalone shared library
build.
Change-Id: I61186964e6099b9b589c4cd45b8314dcb2210c89
Reviewed-on: https://boringssl-review.googlesource.com/4372
Reviewed-by: Adam Langley <agl@google.com>
The rest of ssl/ still includes things everywhere, but this at least fixes the
includes that were implicit from ssl/internal.h.
Change-Id: I7ed22590aca0fe78af84fd99a3e557f4b05f6782
Reviewed-on: https://boringssl-review.googlesource.com/4281
Reviewed-by: Adam Langley <agl@google.com>
Match the other internal headers.
Change-Id: Iff7e2dd06a1a7bf993053d0464cc15638ace3aaa
Reviewed-on: https://boringssl-review.googlesource.com/4280
Reviewed-by: Adam Langley <agl@google.com>
Within the library, only ssl_update_cache read them, so add a dedicated field
to replace that use.
The APIs have a handful of uninteresting callers so I've left them in for now,
but they now always return zero.
Change-Id: Ie4e36fd4ab18f9bff544541d042bf3c098a46933
Reviewed-on: https://boringssl-review.googlesource.com/4101
Reviewed-by: Adam Langley <agl@google.com>
Some things were misindented in the reformatting.
Change-Id: I97642000452ce4d5b4c8a39b794cec13097d8760
Reviewed-on: https://boringssl-review.googlesource.com/3870
Reviewed-by: Adam Langley <agl@google.com>
I found no users of this. We can restore it if needbe, but I don't expect
anyone to find it useful in its current form. The API is suspect for the same
reasons DTLSv1_listen was. An SSL object is stateful and assumes you already
have the endpoint separated out.
If we ever need it, server-side HelloVerifyRequest and DTLSv1_listen should be
implemented by a separate stateless listener that statelessly handles
cookieless ClientHello + HelloVerifyRequest. Once a ClientHello with a valid
cookie comes in, it sets up a stateful SSL object and passes control along to
that.
Change-Id: I86adc1dfb6a81bebe987784c36ad6634a9a1b120
Reviewed-on: https://boringssl-review.googlesource.com/3480
Reviewed-by: Adam Langley <agl@google.com>
It doesn't appear that logic (added in upstream's
b7cfcfb7f8e17c17f457b3384010eb027f3aad72) is protecting against anything. On
the contrary, it prohibits implementing CRYPTO_add with real atomic operations!
There's no guarantee that those operations will interact with the locked
implementation.
https://www.mail-archive.com/openssl-users@openssl.org/msg63176.html
As long as ssl->session points to the same session, we know the session won't
be freed. There is no lock protecting, say, SSL_set_session, but a single SSL*
does not appear to be safe to use across threads. If this were to be supported,
both should be guarded by CRYPTO_LOCK_SSL (which is barely used).
CRYPTO_LOCK_SSL_SESSION isn't sufficient anyway; it could sample while
SSL_set_session is busy swapping out the now freed old session with the new.
Change-Id: I54623d0690c55c2c86720406ceff545e2e5f2f8f
Reviewed-on: https://boringssl-review.googlesource.com/3345
Reviewed-by: Adam Langley <agl@google.com>
The fact that an SSL_SESSION is reference-counted is already part of the API.
If an external application (like, say, the test code) wishes to participate, we
should let it.
Change-Id: If04d26a35141da14fd8d917de6cc1c10537ad11a
Reviewed-on: https://boringssl-review.googlesource.com/3344
Reviewed-by: Adam Langley <agl@google.com>
More modern versions of GCC (at least with aarch64) are warning about an
unused value in these locations. It's incorrect, but I guess that the
macro is confusing it.
Using a (void) tag is a little ugly but solves the problem.
Change-Id: If6ba5083ab6e501c81e7743ae1ed99a89565e57c
Reviewed-on: https://boringssl-review.googlesource.com/2810
Reviewed-by: Adam Langley <agl@google.com>
RAND_pseudo_bytes just calls RAND_bytes now and only returns 0 or 1. Switch all
callers within the library call the new one and use the simpler failure check.
This fixes a few error checks that no longer work (< 0) and some missing ones.
Change-Id: Id51c79deec80075949f73fa1fbd7b76aac5570c6
Reviewed-on: https://boringssl-review.googlesource.com/2621
Reviewed-by: Adam Langley <agl@google.com>
SSL_ST_BEFORE isn't a possible state anymore. It seems this state meant the
side wasn't known, back in the early SSLeay days. Now upstream guesses
(sometimes incorrectly with generic methods), and we don't initialize until
later. SSL_shutdown also doesn't bother to call ssl3_shutdown at all if the
side isn't initialized and SSL_ST_BEFORE isn't the uninitialized state, which
seems a much more sensible arrangement.
Likewise, because bare SSL_ST_BEFOREs no longer exist, SSL_in_init implies
SSL_in_before and there is no need to check both.
Change-Id: Ie680838b2f860b895073dabb4d759996e21c2824
Reviewed-on: https://boringssl-review.googlesource.com/2564
Reviewed-by: Adam Langley <agl@google.com>
This is a bit of cleanup that probably should have been done at the same time
as 30ddb434bf.
For now, version negotiation is implemented with a method swap. It also
performs this swap on SSL_set_session, but this was neutered in
30ddb434bf. Rather than hackishly neuter it,
remove it outright. In addition, remove SSL_set_ssl_method. Now all method
swaps are internal: SSLv23_method switch to a version-specific method and
SSL_clear undoing it.
Note that this does change behavior: if an SSL* is created with one
version-specific method and we SSL_set_session to a session from a /different/
version, we would switch to the /other/ version-specific method. This is
extremely confusing, so it's unlikely anyone was actually expecting it.
Version-specific methods in general don't work well.
Change-Id: I72a5c1f321ca9aeb1b52ebe0317072950ba25092
Reviewed-on: https://boringssl-review.googlesource.com/2390
Reviewed-by: Adam Langley <agl@google.com>
This is only used for EAP-FAST which we apparently don't need to support.
Remove it outright. We broke it in 9eaeef81fa by
failing to account for session misses.
If this changes and we need it later, we can resurrect it. Preferably
implemented differently: the current implementation is bolted badly onto the
handshake. Ideally use the supplied callbacks to fabricate an appropriate
SSL_SESSION and resume that with as much of the normal session ticket flow as
possible.
The one difference is that EAP-FAST seems to require the probing mechanism for
session tickets rather than the sane session ID echoing version. We can
reimplement that by asking the record layer to probe ahead for one byte.
Change-Id: I38304953cc36b2020611556a91e8ac091691edac
Reviewed-on: https://boringssl-review.googlesource.com/2360
Reviewed-by: Adam Langley <agl@google.com>
There's not much point in retaining the identity hint in the SSL_SESSION. This
avoids the complexity around setting psk_identity hint on either the SSL or the
SSL_SESSION. Introduce a peer_psk_identity_hint for the client to store the one
received from the server.
This changes the semantics of SSL_get_psk_identity_hint; it now only returns
the value configured for the server. The client learns the hint through the
callback. This is compatible with the one use of this API in conscrypt (it
pulls the hint back out to pass to a callback).
Change-Id: I6d9131636b47f13ac5800b4451436a057021054a
Reviewed-on: https://boringssl-review.googlesource.com/2213
Reviewed-by: Adam Langley <agl@google.com>
There's no need to store them on the session. They're temporary handshake
state and weren't serialized in d2i_SSL_SESSION anyway.
Change-Id: I830d378ab49aaa4fc6c4c7a6a8c035e2263fb763
Reviewed-on: https://boringssl-review.googlesource.com/1990
Reviewed-by: Adam Langley <agl@google.com>
This removes the need to track the client cipher list in the SSL_SESSION. It
also eliminates a field in SSL_SESSION that wasn't serialized by
i2d_SSL_SESSION. It's only used to implement SSL_get_shared_ciphers which is
only used by debug code.
Moreover, it doesn't work anyway. The SSLv2 logic pruned that field to the
common ciphers, but the SSLv3+ logic just stores the client list as-is. I found
no internal callers that were actually compiled (if need be we can stub in
something that always returns the empty string or so).
Change-Id: I55ad45964fb4037fd623f7591bc574b2983c0698
Reviewed-on: https://boringssl-review.googlesource.com/1866
Reviewed-by: Adam Langley <agl@google.com>
Remove the old implementation which was excessively general. This mirrors the
SCT support and adds a single boolean flag to request an OCSP response with no
responder IDs, extensions, or frills. The response, if received, is stored on
the SSL_SESSION so that it is available for (re)validation on session
resumption; Chromium revalidates the saved auth parameters on resume.
Server support is unimplemented for now. This API will also need to be adjusted
in the future if we implement RFC 6961.
Change-Id: I533c029b7f7ea622d814d05f934fdace2da85cb1
Reviewed-on: https://boringssl-review.googlesource.com/1671
Reviewed-by: Adam Langley <agl@google.com>
Don't pollute the embedder's namespace with a session_ctx macro. It looks like
the difference was that, without TLS extensions, session_ctx was ctx rather
than initial_ctx. Now it's always initial_ctx. Retain the semantics of
switching SSL_CTX's out after the fact, until/unless we decide to replace that
with something less scary-sounding.
Change-Id: Ie5df5138aec25218ca80031cf645671968b8a54a
Reviewed-on: https://boringssl-review.googlesource.com/1663
Reviewed-by: Adam Langley <agl@google.com>
Get all this stuff out of the way.
- OPENSSL_NO_MD5
- OPENSSL_NO_SHA
- OPENSSL_NO_EC
- OPENSSL_NO_ECDSA
- OPENSSL_NO_ECDH
- OPENSSL_NO_NEXTPROTONEG
- OPENSSL_NO_DH
- OPENSSL_NO_SSL3
- OPENSSL_NO_RC4
- OPENSSL_NO_RSA
Also manually removed a couple instances of OPENSSL_NO_DSA that seemed to be
confused anyway. Did some minor manual cleanup. (Removed a few now-pointless
'if (0)'s.)
Change-Id: Id540ba97ee22ff2309ab20ceb24c7eabe766d4c4
Reviewed-on: https://boringssl-review.googlesource.com/1662
Reviewed-by: Adam Langley <agl@google.com>
Otherwise, in C, it becomes a K&R function declaration which doesn't actually
type-check the number of arguments.
Change-Id: I0731a9fefca46fb1c266bfb1c33d464cf451a22e
Reviewed-on: https://boringssl-review.googlesource.com/1582
Reviewed-by: Adam Langley <agl@google.com>
I see no internal users and the existence of a THIRD version encoding
complicates all version-checking logic. Also convert another version check to
SSL_IS_DTLS that was missed earlier.
Change-Id: I60d215f57d44880f6e6877889307dc39dbf838f7
Reviewed-on: https://boringssl-review.googlesource.com/1550
Reviewed-by: Adam Langley <agl@google.com>
This lets us put the SSL_CIPHER table in the data section. For type-checking,
make STACK_OF(SSL_CIPHER) cast everything to const SSL_CIPHER*.
Note that this will require some changes in consumers which weren't using a
const SSL_CIPHER *.
Change-Id: Iff734ac0e36f9e5c4a0f3c8411c7f727b820469c
Reviewed-on: https://boringssl-review.googlesource.com/1541
Reviewed-by: Adam Langley <agl@google.com>
Of the remaining implementations left, ssl3_, dtls1_, and ssl23_, dtls1_ is
redundant and can be folded into ssl3_. ssl23_ actually isn't; it sets 5
minutes rather than 2 hours. Two hours seems to be what everything else uses
and seems a saner default. Most consumers seem to override it anyway
(SSL_CTX_set_timeout). But it is a behavior change.
The method is called at two points:
- SSL_get_default_timeout
- SSL_CTX_new
Incidentally, the latter call actually makes the former never called internally
and the value it returns a lie. SSL_get_default_timeout returns the default
timeout of the /current/ method, but in ssl_get_new_session, the timeout is
shadowed by session_timeout on the context. That is initialized when
SSL_CTX_new is called. So, unless you go out of your way to
SSL_CTX_set_timeout(0), it always overrides. (And it actually used to a
difference because, for SSL23, the SSL_CTX's method is SSL23, but, when session
creation happens, the SSL's method is the version-specific one.)
Change-Id: I331d3fd69b726242b36492402717b6d0b521c6ee
Reviewed-on: https://boringssl-review.googlesource.com/1521
Reviewed-by: Adam Langley <agl@google.com>
This was done for the server when parsing a session ticket, but it
wasn't done in the parsing function itself. That caused problems when
high level code used the parsing function directly to set a session for
the client code.
See comments in internal bug 7091840.
Change-Id: Iaa048c3df62cd9fe7a003af33805819e2556960a
Android needs this and it was patched into their OpenSSL in
https://android.googlesource.com/platform/external/openssl.git/+/master/patches/0003-jsse.patch
It appears that this is needed because javax.net.ssl.SSLEngine has it as
part of its interface and thus it's part of the Android API. No idea why
anything would ever want to disable that though.
Change-Id: I9c6279a961637f44936889edbe269b9d5c19746d
Without SSLv2, all cipher suite values are 2 bytes. Represent them as a
uint16_t and make all functions pass those around rather than pointers.
This removes SSL_CIPHER_find as it's unused.
Change-Id: Iea0b75abee4352a8333a4b8e39a161430ae55ea6
Reviewed-on: https://boringssl-review.googlesource.com/1259
Reviewed-by: Adam Langley <agl@google.com>
Also fix some DTLS cookie bugs. rcvd_cookie is never referenced after being
saved (and the length isn't saved, so it couldn't be used anyway), and the
cookie verification failed to check the length.
For convenience, add a CBS_mem_equal helper function. Saves a bit of
repetition.
Change-Id: I187137733b069f0ac8d8b1bf151eeb80d388b971
Reviewed-on: https://boringssl-review.googlesource.com/1174
Reviewed-by: Adam Langley <agl@google.com>
Found no users of the functions which control the feature. (Also I don't
particularly want to port all of that to CBS...)
Change-Id: I55da42c44d57252bd47bdcb30431be5e6e90dc56
Reviewed-on: https://boringssl-review.googlesource.com/1061
Reviewed-by: Adam Langley <agl@google.com>
Now that the consuming code in ssl/ is removed, there is no need for this.
Leave SSL_COMP and STACK_OF(SSL_COMP) for now so as not to break any code which
manipulates the output of SSL_COMP_get_compression_methods to disable
compression.
Change-Id: Idf0a5debd96589ef6e7e56acf5d9259412b7d7a1
