It's very annoying having to remember the right incant every time I want
to switch around between my build, build-release, build-asan, etc.,
output directories.
Unfortunately, this target is pretty unfriendly without CMake 3.2+ (and
Ninja 1.5+). This combination gives a USES_TERMINAL flag to
add_custom_target which uses Ninja's "console" pool, otherwise the
output buffering gets in the way. Ubuntu LTS is still on an older CMake,
so do a version check in the meantime.
CMake also has its own test mechanism (CTest), but this doesn't use it.
It seems to prefer knowing what all the tests are and then tries to do
its own output management and parallelizing and such. We already have
our own runners. all_tests.go could actually be converted tidily, but
generate_build_files.py also needs to read it, and runner.go has very
specific needs.
Naming the target ninja -C build test would be nice, but CTest squats
that name and CMake grumps when you use a reserved name, so I've gone
with run_tests.
Change-Id: Ibd20ebd50febe1b4e91bb19921f3bbbd9fbcf66c
Reviewed-on: https://boringssl-review.googlesource.com/6270
Reviewed-by: Adam Langley <alangley@gmail.com>
arm_arch.h is included from ARM asm files, but lives in crypto/, not
openssl/include/. Since the asm files are often built from a different
location than their position in the source tree, relative include paths
are unlikely to work so, rather than having crypto/ be a de-facto,
second global include path, this change moves arm_arch.h to
include/openssl/.
It also removes entries from many include paths because they should be
needed as relative includes are always based on the locations of the
source file.
Change-Id: I638ff43d641ca043a4fc06c0d901b11c6ff73542
Reviewed-on: https://boringssl-review.googlesource.com/5746
Reviewed-by: Adam Langley <agl@google.com>
This removes EVP_PKEY_HMAC and all the support code around it. EVP_MD requires
a lot of extra glue to support HMAC. This lets us prune it all away.
As a bonus, it removes a (minor) dependency from EVP to the legacy ASN.1 stack.
Change-Id: I5a9e3e39f518429828dbf13d14647fb37d9dc35a
Reviewed-on: https://boringssl-review.googlesource.com/5120
Reviewed-by: Adam Langley <agl@google.com>
It's never called externally and for good reason; the only flag to set is
EVP_MD_CTX_FLAG_NO_INIT which is an implementation detail of EVP_PKEY_HMAC
(hopefully to be removed eventually). Indeed, only EVP_PKEY_HMAC ever calls
this function. Except there's no need to because the HMAC_CTX has already been
initialized at that point. (And were it not initialized, that call would not
bode well for the poor HMAC_CTX.)
The legacy EVP_PKEY_HMAC API has test coverage and still works after this
change.
Change-Id: I2fb0bede3c24ad1519f9433f957606de15ba86c7
Reviewed-on: https://boringssl-review.googlesource.com/4970
Reviewed-by: Adam Langley <agl@google.com>
Not terribly important given that we already have NIST vectors, but may as
well. These tests come from upstream's
2cfbdd71dde0c3ddf4597eb20cc3e3fb8485fc15.
Change-Id: I4f8dadc7d5d1599d0b75ecdef06f2fc6a5cd8003
Reviewed-on: https://boringssl-review.googlesource.com/4962
Reviewed-by: Adam Langley <agl@google.com>
Enough code fails to check their return codes anyway. We ought to make
it official.
Change-Id: Ie646360fd7073ea943036f5e21bed13df7e1b77a
Reviewed-on: https://boringssl-review.googlesource.com/4954
Reviewed-by: Adam Langley <agl@google.com>
Currently far from passing and I haven't even tried with a leak checker yet.
Also bn_test is slow.
Change-Id: I4fe2783aa5f7897839ca846062ae7e4a367d2469
Reviewed-on: https://boringssl-review.googlesource.com/4794
Reviewed-by: Adam Langley <agl@google.com>
This imports the EVP_PKEY test data of upstream's evptests.txt, but
modified to fit our test framework and with a new test driver. The
remainder of the test data will be imported separately into aead_test
and cipher_test.
Some minor changes to the test format were made to account for test
framework differences. One test has different results since we don't
support RSA signatures with omitted (rather than NULL) parameters.
Otherwise, the biggest difference in test format is that the ad-hoc
result strings are replaced with checking ERR_peek_error.
Change-Id: I758869abbeb843f5f2ac6c1cbd87333baec08ec3
Reviewed-on: https://boringssl-review.googlesource.com/4703
Reviewed-by: Adam Langley <agl@google.com>
This adds a file-based test framework to crypto/test. It knows how to
parse formats similar to either upstream's evp_test and our aead_test.
hmac_test has been converted to that with tests from upstream's
evp_test. Upstream tests it against the deprecated EVP_PKEY_HMAC API,
which will be tested by running evp_test against the same input file, to
avoid having to duplicate the test vectors. hmac_test runs those same
inputs against the supported HMAC_CTX APIs.
Change-Id: I9d2b6adb9be519760d1db282b9d43efd6f9adffb
Reviewed-on: https://boringssl-review.googlesource.com/4701
Reviewed-by: Adam Langley <agl@google.com>
There's no good reason to do this, and it doesn't work; HMAC checks the length
of the key and runs it through the hash function if too long. The reuse occurs
after this check.
This allows us to shave 132 bytes off HMAC_CTX as this was the only reason it
ever stored the original key. It also slightly simplifies HMAC_Init_ex's
logic.
Change-Id: Ib56aabc3630b7178f1ee7c38ef6370c9638efbab
Reviewed-on: https://boringssl-review.googlesource.com/3733
Reviewed-by: Adam Langley <agl@google.com>
We've already initialized the context, HMAC_Init has questionable behavior
around NULL keys, and this avoids a size_t truncation.
Change-Id: Iab6bfc24fe22d46ca4c01be6129efe0630d553e6
Reviewed-on: https://boringssl-review.googlesource.com/3732
Reviewed-by: Adam Langley <agl@google.com>
Including string.h in base.h causes any file that includes a BoringSSL
header to include string.h. Generally this wouldn't be a problem,
although string.h might slow down the compile if it wasn't otherwise
needed. However, it also causes problems for ipsec-tools in Android
because OpenSSL didn't have this behaviour.
This change removes string.h from base.h and, instead, adds it to each
.c file that requires it.
Change-Id: I5968e50b0e230fd3adf9b72dd2836e6f52d6fb37
Reviewed-on: https://boringssl-review.googlesource.com/3200
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
The special-case in HMAC is no longer needed. Test that HMAC_CTX is initialized
with the zero key.
Change-Id: I4ee2b495047760765c7d7fdfb4ccb510723aa263
Reviewed-on: https://boringssl-review.googlesource.com/3121
Reviewed-by: Adam Langley <agl@google.com>
In an attempt to assign a zero-length HMAC key, consumers might
incorrectly call:
HMAC_Init_ex(key=NULL, key_len=0)
This does not work as expected since |key==NULL| has special semantics.
This bug may consequently result in uninitialized memory being used for
the HMAC key data.
This workaround doesn't fix all the problems associated with this
pattern, however by defaulting to a zero key the results are more
predictable than before.
BUG=http://crbug.com/449409
Change-Id: I777276d57c61f1c0cce80b18e28a9b063784733f
Reviewed-on: https://boringssl-review.googlesource.com/3040
Reviewed-by: Adam Langley <agl@google.com>
HMAC_CTX_copy's documentation is off. It actually follows the old copy
functions which call FOO_init on dest first. Notably this means that they leak
memory if dest is currently in use.
Add HMAC_CTX_copy_ex as an analog of EVP_MD_CTX_copy and deprecate
HMAC_CTX_copy. (EVP_CIPHER_CTX_copy, in contrast, was correct from the start.)
Change-Id: I48566c858663d3f659bd356200cf862e196576c9
Reviewed-on: https://boringssl-review.googlesource.com/2694
Reviewed-by: Adam Langley <agl@google.com>
The expectation when calling HMAC with key=NULL and keylen=0 is to compute
HMAC on the provided data with a key of length 0 instead of using the
"previous" key, which in the case of HMAC() is whatever bytes happen to be
left on the stack when the HMAC_CTX struct is allocated.
Change-Id: I52a95e262ee4e15f1af3136cb9c07f42f40ce122
Reviewed-on: https://boringssl-review.googlesource.com/2660
Reviewed-by: Adam Langley <agl@google.com>
Chromium does not like static initializers, and the CPU logic uses one to
initialize CPU bits. However, the crypto library lacks an explicit
initialization function, which could complicate (no compile-time errors)
porting existing code which uses crypto/, but not ssl/.
Add an explicit CRYPTO_library_init function, but make it a no-op by default.
It only does anything (and is required) if building with
BORINGSSL_NO_STATIC_INITIALIZER.
Change-Id: I6933bdc3447fb382b1f87c788e5b8142d6f3fe39
Reviewed-on: https://boringssl-review.googlesource.com/1770
Reviewed-by: Adam Langley <agl@google.com>
Previously, public headers lived next to the respective code and there
were symlinks from include/openssl to them.
This doesn't work on Windows.
This change moves the headers to live in include/openssl. In cases where
some symlinks pointed to the same header, I've added a file that just
includes the intended target. These cases are all for backwards-compat.
Change-Id: I6e285b74caf621c644b5168a4877db226b07fd92
Reviewed-on: https://boringssl-review.googlesource.com/1180
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
Initial fork from f2d678e6e89b6508147086610e985d4e8416e867 (1.0.2 beta).
(This change contains substantial changes from the original and
effectively starts a new history.)
