A memory leak can occur in dtls1_buffer_record if either of the calls to
ssl3_setup_buffers or pqueue_insert fail. The former will fail if there
is a malloc failure, whilst the latter will fail if attempting to add a
duplicate record to the queue. This should never happen because
duplicate records should be detected and dropped before any attempt to
add them to the queue. Unfortunately records that arrive that are for
the next epoch are not being recorded correctly, and therefore replays
are not being detected. Additionally, these "should not happen" failures
that can occur in dtls1_buffer_record are not being treated as fatal and
therefore an attacker could exploit this by sending repeated replay
records for the next epoch, eventually causing a DoS through memory
exhaustion.
Thanks to Chris Mueller for reporting this issue and providing initial
analysis and a patch. Further analysis and the final patch was performed
by Matt Caswell from the OpenSSL development team.
CVE-2015-0206
(Imported from upstream's 7c6a3cf2375f5881ef3f3a58ac0fbd0b4663abd1).
Change-Id: I765fe61c75bc295bcc4ab356b8a5ce88c8964764
Reviewed-on: https://boringssl-review.googlesource.com/2782
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
This change has no semantic effect (I hope!). It's just a reformatting
of a few files in ssl/. This is just a start – the other files in ssl/
should follow in the coming days.
Change-Id: I5eb3f4b18d0d46349d0f94d3fe5ab2003db5364e
DTLS_method() can now negotiate versions without switching methods.
Change-Id: I0655b3221b6e7e4b3ed4acc45f1f41c594447021
Reviewed-on: https://boringssl-review.googlesource.com/2582
Reviewed-by: Adam Langley <agl@google.com>
SSL3_ENC_METHOD will remain version-specific while SSL_METHOD will become
protocol-specific. This finally removes all the version-specific portions of
SSL_METHOD but the version tag itself.
(SSL3_ENC_METHOD's version-specific bits themselves can probably be handled by
tracking a canonicalized protocol version. It would simplify version
comparisons anyway. The one catch is SSLv3 has a very different table. But
that's a cleanup for future. Then again, perhaps a version-specific method
table swap somewhere will be useful later for TLS 1.3.)
Much of this commit was generated with sed invocation:
s/method->ssl3_enc/enc_method/g
Change-Id: I2b192507876aadd4f9310240687e562e56e6c0b1
Reviewed-on: https://boringssl-review.googlesource.com/2581
Reviewed-by: Adam Langley <agl@google.com>
PR#1767
(Imported from upstream's fe78f08d1541211566a5656395186bfbdc61b6f8)
Not sure this is reachable (upstream's PR references custom engines), but
better be tidy. Note this is slightly different from upstream's: EVP_Cipher is
documented to return -1 on failure, not 0.
Change-Id: I836f12b73c6912a8ae8cbd37cfd3d33466acbc9e
Reviewed-on: https://boringssl-review.googlesource.com/2478
Reviewed-by: Adam Langley <agl@google.com>
first_packet is a temporary connection-global flag set for the duration of some
call and then queried from other code. This kind of logic is too difficult to
reason through. It also incorrectly treats renegotiate ClientHellos as
pre-version-negotiation records. This eliminates the need to query
enc_write_ctx (which wasn't EVP_AEAD-aware anyway).
Instead, take a leaf from Go TLS's book and add a have_version bit. This is
placed on s->s3 as it is connection state; s->s3 automatically gets reset on
SSL_clear while s doesn't.
This new flag will also be used to determine whether to do the V2ClientHello
sniff when the version-locked methods merge into SSLv23_method. It will also
replace needing to condition s->method against a dummy DTLS_ANY_VERSION value
to determine whether DTLS version negotiation has happened yet.
Change-Id: I5c8bc6258b182ba4ab175a48a84eab6d3a001333
Reviewed-on: https://boringssl-review.googlesource.com/2442
Reviewed-by: Adam Langley <agl@google.com>
It's unused. Also per the previous commit message, it historically had a bug
anyway.
Change-Id: I5868641e7938ddebbc0ffd72d218c81cd17c7739
Reviewed-on: https://boringssl-review.googlesource.com/2437
Reviewed-by: Adam Langley <agl@google.com>
This fixes bugs that kept the tests from working:
- Resolve DTLS version and cookie before the session.
- In DTLS_ANY_VERSION, ServerHello should be read with first_packet = 1. This
is a regression from f2fedefdca. We'll want to
do the same for TLS, but first let's change this to a boolean has_version in a
follow-up.
Things not yet fixed:
- DTLS code is not EVP_AEAD-aware. Those ciphers are disabled for now.
- On the client, DTLS_ANY_VERSION creates SSL_SESSIONs with the wrong
ssl_version. The tests pass because we no longer enforce the match as of
e37216f56009fbf48c3a1e733b7a546ca6dfc2af. (In fact, we've gone from the server
ignoring ssl_version and client enforcing to the client mostly ignoring
ssl_version and the server enforcing.)
- ssl3_send_client_hello's ssl_version check checks for equality against
s->version rather than >.
Change-Id: I5a0dde221b2009413df9b9443882b9bf3b29519c
Reviewed-on: https://boringssl-review.googlesource.com/2403
Reviewed-by: Adam Langley <agl@google.com>
Parameters like these should not change between 32-bit and 64-bit. 64 is also
the value recommended in RFC 6347, section 4.1.2.6. Document those fields while
I'm here.
Change-Id: I8481ee0765ff3d261a96a2e1a53b6ad6695b2d42
Reviewed-on: https://boringssl-review.googlesource.com/2222
Reviewed-by: Adam Langley <agl@google.com>
This was added in http://rt.openssl.org/Ticket/Display.html?id=2033 to support
a mode where a DTLS socket would statelessly perform the ClientHello /
HelloVerifyRequest portion of the handshake, to be handed off to a socket
specific to this peer address.
This is not used by WebRTC or other current consumers. If we need to support
something like this, it would be cleaner to do the listen portion (cookieless
ClientHello + HelloVerifyRequest) externally and then spin up an SSL instance
on receipt of a cookied ClientHello. This would require a slightly more complex
BIO to replay the second ClientHello but would avoid peppering the DTLS
handshake state with a special short-circuiting mode.
Change-Id: I7a413932edfb62f8b9368912a9a0621d4155f1aa
Reviewed-on: https://boringssl-review.googlesource.com/2220
Reviewed-by: Adam Langley <agl@google.com>
Without SSL_MODE_AUTO_RETRY, even blocking mode will return
SSL_ERROR_WANT_{READ|WRITE} in the event of a renegotiation.
The comments in the code speak only of "nasty problems" unless this is
done. The original commit that added SSL_MODE_AUTO_RETRY
(54f10e6adce56eb2e59936e32216162aadc5d050) gives a little more detail:
The [...] behaviour is needed by applications such as s_client and
s_server that use select() to determine when to use SSL_read.
Without the -nbio flag, s_client will use select() to find when the
socket is readable and then call SSL_read with a blocking socket.
However, this will still block in the event of an incomplete record, so
the delay is already unbounded. This it's very unclear what the point of
this behaviour ever was.
Perhaps if the read and write paths were different sockets where the
read socket was non-blocking but the write socket was blocking. But that
seems like an implausible situation to worry too much about.
Change-Id: I9d9f2526afc2e0fd0e5440e9a047f419a2d61afa
Reviewed-on: https://boringssl-review.googlesource.com/2140
Reviewed-by: Adam Langley <agl@google.com>
This code isn't compiled in. It seems there was some half-baked logic for a
7-byte alert that includes more information about handshake messages
retransmit.
No such alert exists, and the code had a FIXME anyway. If it gets resurrected
in DTLS 1.3 or some extension, we can deal with it then.
Change-Id: I8784ea8ee44bb8da4b0fe5d5d507997526557432
Reviewed-on: https://boringssl-review.googlesource.com/2121
Reviewed-by: Adam Langley <agl@google.com>
I see no internal users and the existence of a THIRD version encoding
complicates all version-checking logic. Also convert another version check to
SSL_IS_DTLS that was missed earlier.
Change-Id: I60d215f57d44880f6e6877889307dc39dbf838f7
Reviewed-on: https://boringssl-review.googlesource.com/1550
Reviewed-by: Adam Langley <agl@google.com>
A modern TLS library without full support for TLS does not make sense.
Change-Id: I032537d1412f6e4effc9a2dd47123baf0084b4c6
Reviewed-on: https://boringssl-review.googlesource.com/1382
Reviewed-by: Adam Langley <agl@google.com>
This patch removes support for empty records (which is almost
universally disabled via SSL_OP_ALL) and adds optional support for 1/n-1
record splitting.
The latter is not enabled by default, since it's not typically used on
servers, but it should be enabled in web browsers since there are known
attacks in that case (see BEAST).
Initial fork from f2d678e6e89b6508147086610e985d4e8416e867 (1.0.2 beta).
(This change contains substantial changes from the original and
effectively starts a new history.)
