May as well use this convenience function when we can. A little tidier. Even
fixes a leak on malloc failure in eckey_type2param.
Change-Id: Ie48dd98f2fe03fa9911bd78db4423ab9faefc63d
Reviewed-on: https://boringssl-review.googlesource.com/3772
Reviewed-by: Adam Langley <agl@google.com>
Fix a few remnants of them being unsigned long. Also rename extremely unhelpful
variable names in SSL_get_error. i is now ret_code to match the header.
Change-Id: Ic31d6626bfe09c9e21c03691dfc716c5573833ea
Reviewed-on: https://boringssl-review.googlesource.com/3881
Reviewed-by: Adam Langley <agl@google.com>
Some things were misindented in the reformatting.
Change-Id: I97642000452ce4d5b4c8a39b794cec13097d8760
Reviewed-on: https://boringssl-review.googlesource.com/3870
Reviewed-by: Adam Langley <agl@google.com>
See also upstream's 687eaf27a7e4bdfc58dd455e2566b915a7a25c20. I don't think any
of the *Update functions can actually fail (we should verify this and, if
accurate, document it), but HMAC_Final can. It internally copies an EVP_MD_CTX.
Change-Id: I318cb9d0771d536249a26b61d34fe0413a4d3a10
Reviewed-on: https://boringssl-review.googlesource.com/3830
Reviewed-by: Adam Langley <agl@google.com>
signed/unsigned comparison. Just add a cast for now as in s3_both.c. Later
we'll properly size_t it alongside other tightening of this interface.
Change-Id: Idc8441d65e8ca65e39ab7172a8ec87d9ad710ed6
Reviewed-on: https://boringssl-review.googlesource.com/3860
Reviewed-by: Adam Langley <agl@google.com>
The assert was supposed to be *added* in fcf25833 but instead replaced
the check.
BUG=465557
Change-Id: I0d3db5038515021e5bdd1ccb9ff08d4f78552621
Reviewed-on: https://boringssl-review.googlesource.com/3850
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
It's never called or implemented.
Change-Id: Id41c2fbd23d27cc440e8a23ac1b2d590e50ff20f
Reviewed-on: https://boringssl-review.googlesource.com/3770
Reviewed-by: Adam Langley <agl@google.com>
None of these are version-specific. SSL_PROTOCOL_METHOD's interface will change
later, but this gets us closer to folding away SSL3_ENC_METHOD.
Change-Id: Ib427cdff32d0701a18fe42a52cdbf798f82ba956
Reviewed-on: https://boringssl-review.googlesource.com/3769
Reviewed-by: Adam Langley <agl@google.com>
Turn them into static functions that take in an hm_fragment. It's not
immediately obvious that the frag_off/frag_len bounds checks and the msg_len
consistency check are critical to avoiding an out-of-bounds write. Better to
have dtls1_hm_fragment_mark also check internally.
Also rework the bitmask logic to be clearer and avoid a table.
Change-Id: Ica54e98f66295efb323e033cb6c67ab21e7d6cbc
Reviewed-on: https://boringssl-review.googlesource.com/3765
Reviewed-by: Adam Langley <agl@google.com>
Notably, drop all special cases around receiving a message in order and
receiving a full message. It makes things more complicated and was the source
of bugs (the MixCompleteMessageWithFragments tests added in this CL did not
pass before). Instead, every message goes through an hm_fragment, and
dtls1_get_message always checks buffered_messages to see if the next is
complete.
The downside is that we pay one more copy of the message data in the common
case. This is only during connection setup, so I think it's worth the
simplicity. (If we want to optimize later, we could either tighten
ssl3_get_message's interface to allow the handshake data being in the
hm_fragment's backing store rather than s->init_buf or swap out s->init_buf
with the hm_fragment's backing store when a mesasge completes.
This CL does not address ssl_read_bytes being an inappropriate API for DTLS.
Future work will revise the handshake/transport boundary to align better with
DTLS's needs. Also other problems that I've left as TODOs.
Change-Id: Ib4570d45634b5181ecf192894d735e8699b1c86b
Reviewed-on: https://boringssl-review.googlesource.com/3764
Reviewed-by: Adam Langley <agl@google.com>
We actually don't really care about this special-case since we only test client
full handshakes where the runner sends the second Finished not the shim
(otherwise the overlap logic and retransmitting on every fragment would
probably break us), but it should probably live next to the fragmentation
logic.
Change-Id: I54097d84ad8294bc6c42a84d6f22f496e63eb2a8
Reviewed-on: https://boringssl-review.googlesource.com/3763
Reviewed-by: Adam Langley <agl@google.com>
If the peer fragments Finished into multiple pieces, there is no need to
retransmit multiple times.
Change-Id: Ibf708ad079e1633afd420ff1c9be88a80020cba9
Reviewed-on: https://boringssl-review.googlesource.com/3762
Reviewed-by: Adam Langley <agl@google.com>
We don't support DTLS renego. Removing this separately from the rewrite to call
out intentionally dropping this logic.
Change-Id: Ie4428eea0d2dbbb8b4b8b6474df4821de62558cc
Reviewed-on: https://boringssl-review.googlesource.com/3761
Reviewed-by: Adam Langley <agl@google.com>
Instead, add a separate init_with_direction hook. Normal AEADs ignore the
direction, while legacy AEADs must be initialized with it. This avoids
maintaining extra state to support the delayed initialization.
Change-Id: I25271f0e56ee2783a2fd4d4026434154d58dc0a8
Reviewed-on: https://boringssl-review.googlesource.com/3731
Reviewed-by: Adam Langley <agl@google.com>
The old test just sent an empty ServerKeyExchange which is sufficient as we
reject the message early. But be more thorough and implement the actual
ephemeral key logic in the test server.
Change-Id: I016658762e4502c928c051e14d69eea67b5a495f
Reviewed-on: https://boringssl-review.googlesource.com/3650
Reviewed-by: Adam Langley <agl@google.com>
That might be a reasonable check to make, maybe.
DTLS handshake message reading has a ton of other bugs and needs a complete
rewrite. But let's fix this and get a test in now.
Change-Id: I4981fc302feb9125908bb6161ed1a18288c39e2b
Reviewed-on: https://boringssl-review.googlesource.com/3600
Reviewed-by: Adam Langley <agl@google.com>
Test both asynchronous and synchronous versions. This callback is somewhat
different from others. It's NOT called a second time when the handshake is
resumed. This appears to be intentional and not a mismerge from the internal
patch. The caller is expected to set up any state before resuming the handshake
state machine.
Also test the early callback returning an error.
Change-Id: If5e6eddd7007ea5cdd7533b4238e456106b95cbd
Reviewed-on: https://boringssl-review.googlesource.com/3590
Reviewed-by: Adam Langley <agl@google.com>
This involves more synchronization with child exits as the kernel no longer
closes the pre-created pipes for free, but it works on Windows. As long as
TCP_NODELAY is set, the performance seems comparable. Though it does involve
dealing with graceful socket shutdown. I couldn't get that to work on Windows
without draining the socket; not even SO_LINGER worked. Current (untested)
theory is that Windows refuses to gracefully shutdown a socket if the peer
sends data after we've stopped reading.
cmd.ExtraFiles doesn't work on Windows; it doesn't use fds natively, so you
can't pass fds 4 and 5. (stdin/stdout/stderr are special slots in
CreateProcess.) We can instead use the syscall module directly and mark handles
as inheritable (and then pass the numerical values out-of-band), but that
requires synchronizing all of our shim.Start() calls and assuming no other
thread is spawning a process.
PROC_THREAD_ATTRIBUTE_HANDLE_LIST fixes threading problems, but requires
wrapping more syscalls. exec.Cmd also doesn't let us launch the process
ourselves. Plus it still requires every handle in the list be marked
inheritable, so it doesn't help if some other thread is launching a process
with bInheritHandles TRUE but NOT using PROC_THREAD_ATTRIBUTE_HANDLE_LIST.
(Like Go, though we can take syscall.ForkLock there.)
http://blogs.msdn.com/b/oldnewthing/archive/2011/12/16/10248328.aspx
The more natively Windows option seems to be named pipes, but that too requires
wrapping more system calls. (To be fair, that isn't too painful.) They also
involve a listening server, so we'd still have to synchronize with shim.Wait()
a la net.TCPListener.
Then there's DuplicateHandle, but then we need an out-of-band signal.
All in all, one cross-platform implementation with a TCP sockets seems
simplest.
Change-Id: I38233e309a0fa6814baf61e806732138902347c0
Reviewed-on: https://boringssl-review.googlesource.com/3563
Reviewed-by: Adam Langley <agl@google.com>
Align the DTLS and TLS implementations more. s3_pkt.c's version still has
remnants of fragmentable alerts and only one side marks some variables as
const. Also use warning/fatal constants rather than the numbers with comments.
Change-Id: Ie62d3af1747b6fe4336496c047dfccc9d71fde3f
Reviewed-on: https://boringssl-review.googlesource.com/3562
Reviewed-by: Adam Langley <agl@google.com>
Saves making a temporary SSL_CTX and looking at its insides.
Change-Id: Ia351b9b91aec8b813ad7b6e373773396f0975f9a
Reviewed-on: https://boringssl-review.googlesource.com/3561
Reviewed-by: Adam Langley <agl@google.com>
These were added in upstream's 7e159e0133d28bec9148446e8f4dd86c0216d819 for
SCTP. As far as I can tell, they were a no-op there too. The corresponding RT
ticket makes no mention of them.
SSL_get_error checks the retry flags of the BIO already. Specifically it checks
BIO_should_read and BIO_should_write, but those two automatically set
BIO_should_retry.
(Minor, but I noticed them idly. One less thing to think about when the state
machines finally unify.)
Change-Id: I17a956a51895fba383063dee574e0fbe3209f9b0
Reviewed-on: https://boringssl-review.googlesource.com/3560
Reviewed-by: Adam Langley <agl@google.com>
(Which is just an exported wrapper around ssl3_get_cipher_by_value.)
Change-Id: Ibba166015ce59e337ff50963ba20237ac4949aaf
Reviewed-on: https://boringssl-review.googlesource.com/3543
Reviewed-by: Adam Langley <agl@google.com>
Upstream settled in this API, and it's also the one that we expect
internally and that third_party code will expect.
Change-Id: Id7af68cf0af1f2e4d9defd37bda2218d70e2aa7b
Reviewed-on: https://boringssl-review.googlesource.com/3542
Reviewed-by: Adam Langley <agl@google.com>
We can pass the fragment pointer to dtls1_retransmit_message rather than
having it look it up again.
Change-Id: If6957428418a44e7ceac91a93f7c6032d331d9d8
Reviewed-on: https://boringssl-review.googlesource.com/3510
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
Also move BIO_print_errors_fp up a level so it's less repetitive. There's
enough exit points now that it doesn't seem like adding a separate return exit
code for each has held up. (Maybe there should be a macro that samples
__LINE__...)
Change-Id: I120e59caaa96185e80cf51ea801a5e1f149b1b39
Reviewed-on: https://boringssl-review.googlesource.com/3530
Reviewed-by: Adam Langley <agl@google.com>
Tighten up the requirements for False Start. At this point, neither
AES-CBC or RC4 are something that we want to use unless we're sure that
the server wants to speak them.
Rebase of original CL at: https://boringssl-review.googlesource.com/#/c/1980/
BUG=427721
Change-Id: I9ef7a596edeb8df1ed070aac67c315b94f3cc77f
Reviewed-on: https://boringssl-review.googlesource.com/3501
Reviewed-by: Adam Langley <agl@google.com>
Also adds a flag to runner.go to make it more suitable for printing to a pipe.
Change-Id: I26fae21f3e4910028f6b8bfc4821c8c595525504
Reviewed-on: https://boringssl-review.googlesource.com/3490
Reviewed-by: Adam Langley <agl@google.com>
I believe this is a remnant of DSA. The logic strangely fails to check for
failure and then goes out of its way to ERR_clear_error. I believe this is so
that keys that are missing parameters silently move on. This dates to
upstream's dfeab0689f69c0b4bd3480ffd37a9cacc2f17d9c, which is SSLeay 0.9.1b. At
that time, EVP_PKEY_copy_parameters only did anything for DSA. (Now it only
does anything for ECDSA.)
My read is that this comes from DSA in PKIX's "optional domain parameters"
craziness. RFC 3279 says:
If the DSA domain parameters are omitted from the SubjectPublicKeyInfo
AlgorithmIdentifier and the CA signed the subject certificate using a
signature algorithm other than DSA, then the subject's DSA domain parameters
are distributed by other means.
This was probably part of some weird thing where, if your certificate is
missing parameters, the server would know what to use based on the private key.
(Also this was making the malloc tests unhappy.)
Change-Id: I8d8122a9f50a19e2bbe067f311a8e2d30774935c
Reviewed-on: https://boringssl-review.googlesource.com/3484
Reviewed-by: Adam Langley <agl@google.com>
It may fail because the BIO_write to the memory BIO can allocate.
Unfortunately, this bubbles up pretty far up now that we've moved the handshake
hash to ssl3_set_handshake_header.
Change-Id: I58884347a4456bb974ac4783078131522167e29d
Reviewed-on: https://boringssl-review.googlesource.com/3483
Reviewed-by: Adam Langley <agl@google.com>
Found while diagnosing some crashes and hangs in the malloc tests. This (and
the follow-up) get us further but does not quite let the malloc tests pass
quietly, even without valgrind. DTLS silently ignores some malloc failures
(confusion with silently dropping bad packets) which then translate to hangs.
Change-Id: Ief06a671e0973d09d2883432b89a86259e346653
Reviewed-on: https://boringssl-review.googlesource.com/3482
Reviewed-by: Adam Langley <agl@google.com>
False Start is the name it's known by now. Deprecate the old API and expose new
ones with the new name.
Change-Id: I32d307027e178fd7d9c0069686cc046f75fdbf6f
Reviewed-on: https://boringssl-review.googlesource.com/3481
Reviewed-by: Adam Langley <agl@google.com>
I found no users of this. We can restore it if needbe, but I don't expect
anyone to find it useful in its current form. The API is suspect for the same
reasons DTLSv1_listen was. An SSL object is stateful and assumes you already
have the endpoint separated out.
If we ever need it, server-side HelloVerifyRequest and DTLSv1_listen should be
implemented by a separate stateless listener that statelessly handles
cookieless ClientHello + HelloVerifyRequest. Once a ClientHello with a valid
cookie comes in, it sets up a stateful SSL object and passes control along to
that.
Change-Id: I86adc1dfb6a81bebe987784c36ad6634a9a1b120
Reviewed-on: https://boringssl-review.googlesource.com/3480
Reviewed-by: Adam Langley <agl@google.com>
Caught by malloc valgrind tests on Basic-Client-Sync. Also one by inspection
and verified with valgrind. Those should pass now with the exception of
CRYPTO_free_ex_data being internally implemented with malloc.
(Clearly we next should make our malloc tests assert that the containing
function fails to catch when we fail to check for some error and things
silently move one.)
Change-Id: I56c51dc8a32a7d3c7ac907d54015dc241728c761
Reviewed-on: https://boringssl-review.googlesource.com/3440
Reviewed-by: Adam Langley <agl@google.com>
pqueue_free requires the queue be empty.
Change-Id: I633e18fe71ddec51d6005210fcb6570ef53b9808
Reviewed-on: https://boringssl-review.googlesource.com/3410
Reviewed-by: Adam Langley <agl@google.com>
Win64 fires significantly more warnings than Win32. Also some recent
changes made it grumpy.
(We might want to reconsider enabling all of MSVC's warnings. Given the sorts
of warnings some of these are, I'm not sure MSVC's version of -Wall -Werror is
actually tenable. Plus, diverging from the Chromium build, especially before
the bots are ready, is going to break pretty readily.)
Change-Id: If3b8feccf910ceab4a233b0731e7624d7da46f87
Reviewed-on: https://boringssl-review.googlesource.com/3420
Reviewed-by: Adam Langley <agl@google.com>
We have got to get rid of that parameter...
Change-Id: I17f2d1282636f7d077f21dabdc135eecf9300998
Reviewed-on: https://boringssl-review.googlesource.com/3384
Reviewed-by: Adam Langley <agl@google.com>
Previously, error strings were kept in arrays for each subdirectory and
err.c would iterate over them all and insert them at init time to a hash
table.
This means that, even if you have a shared library and lots of processes
using that, each process has ~30KB of private memory from building that
hash table.
This this change, all the error strings are built into a sorted list and
are thus static data. This means that processes can share the error
information and it actually saves binary space because of all the
pointer overhead in the old scheme. Also it saves the time taken
building the hash table at startup.
This removes support for externally-supplied error string data.
Change-Id: Ifca04f335c673a048e1a3e76ff2b69c7264635be
OpenSSL's internal names for the ciphers are not the standard ones and are not
easy to consistently map to the standard ones. Add an API to get the real names
out. (WebRTC wants an API to get the standard names out.)
Also change some incorrect flags on SHA-256 TLS 1.2 ciphers;
SSL_HANDSHAKE_MAC_DEFAULT and SSL_HANDSHAKE_MAC_SHA256 are the same after TLS
1.2. A TLS 1.2 cipher should be tagged explicitly with SHA-256. (This avoids
tripping a check in SSL_CIPHER_get_rfc_name which asserts that default-hash
ciphers only ever use SHA-1 or MD5 for the bulk cipher MAC.)
Change-Id: Iaec2fd4aa97df29883094d3c2ae60f0ba003bf07
Nothing else on SSL* is thread-safe. (Also SSL_set_generate_session_id is never
called.) This removes the last use of CRYPTO_LOCK_SSL.
Change-Id: I4cf8c05d7cef4ea27962ce29902649317c22f74d
Reviewed-on: https://boringssl-review.googlesource.com/3361
Reviewed-by: Adam Langley <agl@google.com>
Found by running malloc tests with -valgrind. Unfortunately, the next one is
deep in crypto/asn1 itself, so I'm going to stop here for now.
Change-Id: I7a33971ee07c6b7b7a98715f2f18e0f29380c0a1
Reviewed-on: https://boringssl-review.googlesource.com/3350
Reviewed-by: Adam Langley <agl@google.com>
We have a stateful object hanging off the SSL* now. May as well use it and
avoid having to remember to reset that.
Change-Id: I5fc5269aa9b158517dd551036e658afaa2ef9acd
Reviewed-on: https://boringssl-review.googlesource.com/3349
Reviewed-by: Adam Langley <agl@google.com>
It's currently a mix of GoogleCPlusPlusStyle and unix_hacker_style. Since it's
now been thoroughly C++-ified, let's go with the former. This also matches the
tool, our other bit of C++ code.
Change-Id: Ie90a166006aae3b8f41628dbb35fcd64e99205df
Reviewed-on: https://boringssl-review.googlesource.com/3348
Reviewed-by: Adam Langley <agl@google.com>
This is more consistent with other asynchronous hooks and gets it working in
DTLS.
Change-Id: Ia17d9d23910e8665b2756516ba729dffc79af8c0
Reviewed-on: https://boringssl-review.googlesource.com/3346
Reviewed-by: Adam Langley <agl@google.com>
It doesn't appear that logic (added in upstream's
b7cfcfb7f8e17c17f457b3384010eb027f3aad72) is protecting against anything. On
the contrary, it prohibits implementing CRYPTO_add with real atomic operations!
There's no guarantee that those operations will interact with the locked
implementation.
https://www.mail-archive.com/openssl-users@openssl.org/msg63176.html
As long as ssl->session points to the same session, we know the session won't
be freed. There is no lock protecting, say, SSL_set_session, but a single SSL*
does not appear to be safe to use across threads. If this were to be supported,
both should be guarded by CRYPTO_LOCK_SSL (which is barely used).
CRYPTO_LOCK_SSL_SESSION isn't sufficient anyway; it could sample while
SSL_set_session is busy swapping out the now freed old session with the new.
Change-Id: I54623d0690c55c2c86720406ceff545e2e5f2f8f
Reviewed-on: https://boringssl-review.googlesource.com/3345
Reviewed-by: Adam Langley <agl@google.com>
The fact that an SSL_SESSION is reference-counted is already part of the API.
If an external application (like, say, the test code) wishes to participate, we
should let it.
Change-Id: If04d26a35141da14fd8d917de6cc1c10537ad11a
Reviewed-on: https://boringssl-review.googlesource.com/3344
Reviewed-by: Adam Langley <agl@google.com>
Start exercising the various async callbacks, starting with channel ID. These
will run under the existing state machine coverage tests; -async will also
enable every asynchronous callback we can.
Change-Id: I173148d93d3a9c575b3abc3e2aceb77968b88f0e
Reviewed-on: https://boringssl-review.googlesource.com/3342
Reviewed-by: Adam Langley <agl@google.com>
bssl_shim rather needs it. It doesn't even free the SSL* properly most of the
time. Now that it does, this opens the door to running malloc tests under
a leak checker (because it's just not slow enough right now).
Change-Id: I37d2004de27180c41b42a6d9e5aea02caf9b8b32
Reviewed-on: https://boringssl-review.googlesource.com/3340
Reviewed-by: Adam Langley <agl@google.com>
This is consistent with ignoring writeRecord failures. Without doing this, the
DTLS MinimumVersion test now flakily fails with:
FAILED (MinimumVersion-Client-TLS12-TLS1-DTLS)
bad error (wanted ':UNSUPPORTED_PROTOCOL:' / 'remote error: protocol version not supported'): local error 'write unix @: broken pipe', child error 'exit status 2', stdout:
2092242157:error:1007b1a7:SSL routines:ssl3_get_server_hello:UNSUPPORTED_PROTOCOL:../ssl/s3_clnt.c:783:
This is because the MinimumVersion tests assert on /both/ expectedError and
expectedLocalError. The latter is valuable as it asserts on the alert the peer
returned. (I would like us to add more such assertions to our tests where
appropriate.) However, after we send ServerHello, we also send a few messages
following it. This races with the peer shutdown and we sometimes get EPIPE
before reading the alert.
Change-Id: I3fe37940a6a531379673a00976035f8e76e0f825
Reviewed-on: https://boringssl-review.googlesource.com/3337
Reviewed-by: Adam Langley <agl@google.com>
This makes the following changes:
- SSL_cutthrough_complete no longer rederives whether cutthrough happened and
just maintains a handshake bit.
- SSL_in_init no longer returns true if we are False Starting but haven't
completed the handshake. That logic was awkward as it depended on querying
in_read_app_data to force SSL_read to flush the entire handshake. Defaulting
SSL_in_init to continue querying the full handshake and special-casing
SSL_write is better. E.g. the check in bidirectional SSL_shutdown wants to know
if we're in a handshake. No internal consumer of
SSL_MODE_HANDSHAKE_CUTTHROUGH ever queries SSL_in_init directly.
- in_read_app_data is gone now that the final use is dead.
Change-Id: I05211a116d684054dfef53075cd277b1b30623b5
Reviewed-on: https://boringssl-review.googlesource.com/3336
Reviewed-by: Adam Langley <agl@google.com>
It may take up to two iterations of s->handshake_func before it is safe to
continue. Fortunately, even if anything was using False Start this way
(Chromium doesn't), we don't inherit NSS's security bug. The "redundant" check
in the type match case later on in this function saves us.
Amusingly, the success case still worked before this fix. Even though we fall
through to the post-handshake codepath and get a handshake record while
"expecting" app data, the handshake state machine is still pumped thanks to a
codepath meant for renego!
Change-Id: Ie129d83ac1451ad4947c4f86380879db8a3fd924
Reviewed-on: https://boringssl-review.googlesource.com/3335
Reviewed-by: Adam Langley <agl@google.com>
The new V2ClientHello sniff asserts, for safety, that nothing else has
initialized the record layer before it runs. However, OpenSSL allows you to
avoid explicitly calling SSL_connect/SSL_accept and instead let
SSL_read/SSL_write implicitly handshake for you. This check happens at a fairly
low-level in the ssl3_read_bytes function, at which point the record layer has
already been initialized.
Add some tests to ensure this mode works.
(Later we'll lift the handshake check to a higher-level which is probably
simpler.)
Change-Id: Ibeb7fb78e5eb75af5411ba15799248d94f12820b
Reviewed-on: https://boringssl-review.googlesource.com/3334
Reviewed-by: Adam Langley <agl@google.com>
This works fine, but I believe NSS had a bug here a couple years ago. Also move
all the Skip* bug options next to each other in order.
Change-Id: I72dcb3babeee7ba73b3d7dc5ebef2e2298e37438
Reviewed-on: https://boringssl-review.googlesource.com/3333
Reviewed-by: Adam Langley <agl@google.com>
This is the source of much of renegotiation's complexity, and of OpenSSL's
implementation of it. In practice, we only care about renegotiation because of
the client auth hack. There, we can safely assume that no server will send
application data between sending the HelloRequest and completing the handshake.
BUG=429450
Change-Id: I37f5abea5fdedb1d53e24ceb11f71287c74bb777
Reviewed-on: https://boringssl-review.googlesource.com/3332
Reviewed-by: Adam Langley <agl@google.com>
EVP_Digest can fail on malloc failure. May as well tidy that. Also make that
humongous comment less verbose.
Change-Id: I0ba74b901a5ac68711b9ed268b4202dc19242909
Reviewed-on: https://boringssl-review.googlesource.com/3331
Reviewed-by: Adam Langley <agl@google.com>
We have test coverage for invalid alerts, but not for normal ones on the DTLS
side.
Change-Id: I359dce8d4dc80dfa99b5d8bacd73f48a8e4ac310
Reviewed-on: https://boringssl-review.googlesource.com/3291
Reviewed-by: Adam Langley <agl@google.com>
The check on the DTLS side was broken anyway. On the TLS side, the spec does
say to ignore them, but there should be no need for this in future-proofing and
NSS doesn't appear to be lenient here. See also
https://boringssl-review.googlesource.com/#/c/3233/
Change-Id: I0846222936c5e08acdcfd9d6f854a99df767e468
Reviewed-on: https://boringssl-review.googlesource.com/3290
Reviewed-by: Adam Langley <agl@google.com>
SSL_AEAD_CTX ownership is currently too confusing. Instead, rely on the lack of
renego, so the previous epoch always uses the NULL cipher. (Were we to support
DTLS renego, we could keep track of s->d1->last_aead_write_ctx like
s->d1->last_write_sequence, but it isn't worth it.)
Buffered messages also tracked an old s->session, but this is unnecessary. The
s->session NULL check in tls1_enc dates to the OpenSSL initial commit and is
redundant with the aead NULL check.
Change-Id: I9a510468d95934c65bca4979094551c7536980ae
Reviewed-on: https://boringssl-review.googlesource.com/3234
Reviewed-by: Adam Langley <agl@google.com>
Nothing recognized through those codepaths is fragmentable in DTLS. Also remove
an unnecessary epoch check. It's not possible to process a record from the
wrong epoch.
Change-Id: I9d0f592860bb096563e2bdcd2c8e50a0d2b65f59
Reviewed-on: https://boringssl-review.googlesource.com/3232
Reviewed-by: Adam Langley <agl@google.com>
This is only applicable for renego and is wrong anyway. The handshake_read_seq
check doesn't account for message reordering. The correct check is if we
haven't yet processed the peer's CCS in the current handshake.
(The other Finished special-case needs to stay, however.)
Change-Id: Ic42897aab7140285ce2f3be24d52b81851b912b5
Reviewed-on: https://boringssl-review.googlesource.com/3231
Reviewed-by: Adam Langley <agl@google.com>
We will not support any form of DTLS renego.
Change-Id: I6eab4ed12a131ad27fdb9b5ea7cc1f35d872cd43
Reviewed-on: https://boringssl-review.googlesource.com/3230
Reviewed-by: Adam Langley <agl@google.com>
It has no callers in internal code.
Change-Id: I53cf1769b71be6a0441533b6af7d3f64aab5098a
Reviewed-on: https://boringssl-review.googlesource.com/3219
Reviewed-by: Adam Langley <agl@google.com>
We have no use for DTLS renego and it's even more complex than TLS renego.
Change-Id: I8680ab361cc8761dd7fc8dfb1bfe1ff4abc6612f
Reviewed-on: https://boringssl-review.googlesource.com/3218
Reviewed-by: Adam Langley <agl@google.com>
For now, only test reorderings when we always or never fragment messages.
There's a third untested case: when full messages and fragments are mixed. That
will be tested later after making it actually work.
Change-Id: Ic4efb3f5e87b1319baf2d4af31eafa40f6a50fa6
Reviewed-on: https://boringssl-review.googlesource.com/3216
Reviewed-by: Adam Langley <agl@google.com>
No behavior change. This is in preparation for buffering a flight of handshake
messages to reorder vigorously on flush.
Change-Id: Ic348829b340bf58d28f332027646559cb11046ac
Reviewed-on: https://boringssl-review.googlesource.com/3215
Reviewed-by: Adam Langley <agl@google.com>
It dates to 2000 from upstream and is only used when serving client auth to
Netscape. It will also get in the way when we get to merging DTLS and TLS
handshake functions because NETSCAPE_HANG_BUG is not valid for DTLS as it is
(the handshake fragmentation code will get confused).
Removing per comment on https://boringssl-review.googlesource.com/#/c/2602/
Change-Id: Ia2d086205bbfed002dc33b2203a47206f373b820
Reviewed-on: https://boringssl-review.googlesource.com/3214
Reviewed-by: Adam Langley <agl@google.com>
All but one field is a no-op.
Change-Id: Ib7bc59a12ce792d5e42fb6e04a4aff54f42643a9
Reviewed-on: https://boringssl-review.googlesource.com/3213
Reviewed-by: Adam Langley <agl@google.com>
This extends the packet adaptor protocol to send three commands:
type command =
| Packet of []byte
| Timeout of time.Duration
| TimeoutAck
When the shim processes a Timeout in BIO_read, it sends TimeoutAck, fails the
BIO_read, returns out of the SSL stack, advances the clock, calls
DTLSv1_handle_timeout, and continues.
If the Go side sends Timeout right between sending handshake flight N and
reading flight N+1, the shim won't read the Timeout until it has sent flight
N+1 (it only processes packet commands in BIO_read), so the TimeoutAck comes
after N+1. Go then drops all packets before the TimeoutAck, thus dropping one
transmit of flight N+1 without having to actually process the packets to
determine the end of the flight. The shim then sees the updated clock, calls
DTLSv1_handle_timeout, and re-sends flight N+1 for Go to process for real.
When dropping packets, Go checks the epoch and increments sequence numbers so
that we can continue to be strict here. This requires tracking the initial
sequence number of the next epoch.
The final Finished message takes an additional special-case to test. DTLS
triggers retransmits on either a timeout or seeing a stale flight. OpenSSL only
implements the former which should be sufficient (and is necessary) EXCEPT for
the final Finished message. If the peer's final Finished message is lost, it
won't be waiting for a message from us, so it won't time out anything. That
retransmit must be triggered on stale message, so we retransmit the Finished
message in Go.
Change-Id: I3ffbdb1de525beb2ee831b304670a3387877634c
Reviewed-on: https://boringssl-review.googlesource.com/3212
Reviewed-by: Adam Langley <agl@google.com>
This reverts commit c67a3ae6ba. With a
deterministic clock, we can now go back to being strict about retransmits. Our
tests will now require that the shim only retransmit when we expect it to.
Change-Id: Iab1deb9665dcd294790c8253d920089e83a9140c
Reviewed-on: https://boringssl-review.googlesource.com/3211
Reviewed-by: Adam Langley <agl@google.com>
This is so the tests needn't be sensitive to the clock. It is, unfortunately, a
test-only hook, but the DTLS retransmit/timeout logic more-or-less requires it
currently. Use this hook to, for now, freeze the clock at zero. This makes the
tests deterministic.
It might be worth designing a saner API in the future. The current one,
notably, requires that the caller's clock be compatible with the one we
internally use. It's also not clear whether the caller needs to call
DTLSv1_handle_timeout or can just rely on the state machine doing it internally
(as it does do). But mock clocks are relatively tame and WebRTC wants to
compile against upstream OpenSSL for now, so we're limited in how much new API
we can build.
Change-Id: I7aad51570596f69275ed0fc1a8892393e4b7ba13
Reviewed-on: https://boringssl-review.googlesource.com/3210
Reviewed-by: Adam Langley <agl@google.com>
Including string.h in base.h causes any file that includes a BoringSSL
header to include string.h. Generally this wouldn't be a problem,
although string.h might slow down the compile if it wasn't otherwise
needed. However, it also causes problems for ipsec-tools in Android
because OpenSSL didn't have this behaviour.
This change removes string.h from base.h and, instead, adds it to each
.c file that requires it.
Change-Id: I5968e50b0e230fd3adf9b72dd2836e6f52d6fb37
Reviewed-on: https://boringssl-review.googlesource.com/3200
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
The variable switches the default type for add_library from STATIC to SHARED.
We can condition additional stuff on that for convenience. (tabtest still
doesn't build.)
BoringSSL as any kind of stable system shared library is still very much
unsupported, but this is probably handy for making sure we don't forget all
those pesky OPENSSL_EXPORTs.
Change-Id: I66ab80bcddbf3724e03e85384141fdf4f4acbc2e
Reviewed-on: https://boringssl-review.googlesource.com/3092
Reviewed-by: Adam Langley <agl@google.com>
This is fatal for TLS but buffered in DTLS. The buffering isn't strictly
necessary (it would be just as valid to drop the record on the floor), but so
long as we want this behavior it should have a test.
Change-Id: I5846bb2fe80d78e25b6dfad51bcfcff2dc427c3f
Reviewed-on: https://boringssl-review.googlesource.com/3029
Reviewed-by: Adam Langley <agl@google.com>
They're not in the duplicated handshake state machines anyway. But we still
shouldn't negotiate them. d1_pkt.c assumes Finished is the only post-CCS
handshake message. An unexpected handshake message in the current epoch may
either be a retransmit/out-of-order message from the previous handshake, or a
message from the next handshake (also potentially out-of-order). In the former
case, we shouldn't spin up another handshake state machine instance.
(This assumption is required due to a protocol bug. DTLS resets sequence
numbers after a handshake, so it is necessary to categorize handshake fragments
by pre-CCS and post-CCS to distinguish between retransmit and renego.)
Change-Id: Ib3c1c7085c729e36a40f7ff14494733156924a24
Reviewed-on: https://boringssl-review.googlesource.com/3028
Reviewed-by: Adam Langley <agl@google.com>
This regressed in e95d20dcb8. EVP_AEAD will push
errors on the error queue (unlike the EVP_CIPHER codepath which checked
everything internally to ssl/ and didn't bother pushing anything). This meant
that a dropped packet would leave junk in the error queue.
Later, when SSL_read returns <= 0 (EOF or EWOULDBLOCK), the non-empty error
queue check in SSL_get_error kicks in and SSL_read looks to have failed.
BUG=https://code.google.com/p/webrtc/issues/detail?id=4214
Change-Id: I1e5e41c77a3e5b71e9eb0c72294abf0da677f840
Reviewed-on: https://boringssl-review.googlesource.com/2982
Reviewed-by: Adam Langley <agl@google.com>
This regressed in fcf25833bc. 0 return code on
unclean shutdown means the underlying BIO returned EOF, didn't push any error
code, but we haven't seen close_notify yet. The intent seems to be that you go
check errno or some BIO-specific equivalent if you care about close_notify.
Make sure test code routes all SSL_read return codes through SSL_get_error
since that's supposed to work in all cases.
(Note that rv == 0 can still give SSL_ERROR_SSL if the error queue is not
empty.)
Change-Id: I45bf9614573f876d93419ce169a4e0d9ceea9052
Reviewed-on: https://boringssl-review.googlesource.com/2981
Reviewed-by: Adam Langley <agl@google.com>
The distinction between publicly and non-publicly invalid is barely acted upon
and slightly silly now that the CBC padding check has been folded into
EVP_AEAD.
Change-Id: Idce4b9b8d29d624e3c95243a147265d071612127
Reviewed-on: https://boringssl-review.googlesource.com/2980
Reviewed-by: Adam Langley <agl@google.com>
This is an initial cut at aarch64 support. I have only qemu to test it
however—hopefully hardware will be coming soon.
This also affects 32-bit ARM in that aarch64 chips can run 32-bit code
and we would like to be able to take advantage of the crypto operations
even in 32-bit mode. AES and GHASH should Just Work in this case: the
-armx.pl files can be built for either 32- or 64-bit mode based on the
flavour argument given to the Perl script.
SHA-1 and SHA-256 don't work like this however because they've never
support for multiple implementations, thus BoringSSL built for 32-bit
won't use the SHA instructions on an aarch64 chip.
No dedicated ChaCha20 or Poly1305 support yet.
Change-Id: Ib275bc4894a365c8ec7c42f4e91af6dba3bd686c
Reviewed-on: https://boringssl-review.googlesource.com/2801
Reviewed-by: Adam Langley <agl@google.com>
SSL_library_init already loads the error strings (unlike upstream). Code which
calls both will end up loading error strings twice. Instead make the second
call a no-op.
Change-Id: Ifd34ab20ed46aabeba14661e58f8dac2bbb29f69
Reviewed-on: https://boringssl-review.googlesource.com/2790
Reviewed-by: Adam Langley <agl@google.com>
The under 32 constraint is silly; it's to check for duplicate curves in
library-supplied configuration. That API is new as of 1.0.2. It doesn't seem
worth bothering; if the caller supplies a repeated value, may as well emit a
repeated one and so be it. (Probably no one will ever call that function
outside of maybe test code anyway.)
While I'm here, remove the 0 constraint too. It's not likely to change, but
removing the return value overload seems easier than keeping comments about it
comments about it.
Change-Id: I01d36dba1855873875bb5a0ec84b040199e0e9bc
Reviewed-on: https://boringssl-review.googlesource.com/2844
Reviewed-by: Adam Langley <agl@google.com>
We only implement four curves (P-224, P-256, P-384, and P-521) and only
advertise the latter three by default. Don't maintain entries corresponding to
all the unimplemented curves.
Change-Id: I1816a10c6f849ca1d9d896bc6f4b64cd6b329481
Reviewed-on: https://boringssl-review.googlesource.com/2843
Reviewed-by: Adam Langley <agl@google.com>
They both happen to be zero, but OBJ_undef is a type error; OBJ_foo expands to
a comma-separated list of integers.
Change-Id: Ia5907dd3bc83240b7cc98af6456115d2efb48687
Reviewed-on: https://boringssl-review.googlesource.com/2842
Reviewed-by: Adam Langley <agl@google.com>
When parsing ClientHello clear any existing extension state from
SRP login and SRTP profile.
(Imported from upstream's 4f605ccb779e32a770093d687e0554e0bbb137d3)
More state that should be systematically reset across handshakes. Add a reset
on the ServerHello end too since that was missed.
Change-Id: Ibb4549acddfd87caf7b6ff853e2adbfa4b7e7856
Reviewed-on: https://boringssl-review.googlesource.com/2838
Reviewed-by: Adam Langley <agl@google.com>
