There is a potential double free in EVP_DigestInit_ex. This is believed
to be reached only as a result of programmer error - but we should fix it
anyway.
(Imported from upstream's e78dc7e279)
Change-Id: I1da7be7db7afcbe9f30f168df000d64ed73d7edd
Reviewed-on: https://boringssl-review.googlesource.com/7541
Reviewed-by: David Benjamin <davidben@google.com>
We recently gained -Werror=missing-prototypes. (See also, we really need to get
those Android bots...)
Change-Id: I3962d3050bccf5f5a057d029b5cbff1695ca1a03
Reviewed-on: https://boringssl-review.googlesource.com/7540
Reviewed-by: Emily Stark (Dunn) <estark@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
The fields of the |bn_blinding_st| are not updated atomically.
Consequently, one field (|A| or |Ai|) might get updated while the
other field (|Ai| or |A|) doesn't get updated, if an error occurs in
the middle of updating. Deal with this by reseting the counter so that
|A| and |Ai| will both get recreated the next time the blinding is
used.
Fix a separate but related issue by resetting the counter to zero after
calling |bn_blinding_create_param| only if |bn_blinding_create_param|
succeeded. Previously, regardless of whether an error occured in
|bn_blinding_create_param|, |b->counter| would get reset to zero. The
consequence of this was that potentially-bad blinding values would get
used 32 times instead of (32 - |b->counter|) times.
Change-Id: I236cdb6120870ef06cba129ed86619f593cbcf3d
Reviewed-on: https://boringssl-review.googlesource.com/7520
Reviewed-by: David Benjamin <davidben@google.com>
Make it match how it is done in p224-64.c. Note in particular that
|size| may be 17, so presumably |pre_comp[16]| is accessed, which one
would not expect when it was declared |precomp[16][3]|.
Change-Id: I54c1555f9e20ccaacbd4cd75a7154b483b4197b7
Reviewed-on: https://boringssl-review.googlesource.com/7467
Reviewed-by: David Benjamin <davidben@google.com>
Since the function doesn't call |BN_CTX_get|, it doesn't need to call
|BN_CTX_start|/|BN_CTX_end|.
Change-Id: I6cb954d3fee2959bdbc81b9b97abc52bb6f7704c
Reviewed-on: https://boringssl-review.googlesource.com/7469
Reviewed-by: David Benjamin <davidben@google.com>
As far as I can tell, this is the last place within libcrypto where
this type of check is missing.
Change-Id: I3d09676abab8c9f6c4e87214019a382ec2ba90ee
Reviewed-on: https://boringssl-review.googlesource.com/7519
Reviewed-by: David Benjamin <davidben@google.com>
Change-Id: Ieba81f114483095f3657e87f669c7562ff75b58c
Signed-off-by: Piotr Sikora <piotrsikora@google.com>
Reviewed-on: https://boringssl-review.googlesource.com/7516
Reviewed-by: David Benjamin <davidben@google.com>
Partially fixes build with -Wmissing-declarations.
Change-Id: Ia563063fb077cda79244c21f02fd1c0f550353c2
Signed-off-by: Piotr Sikora <piotrsikora@google.com>
Reviewed-on: https://boringssl-review.googlesource.com/7515
Reviewed-by: David Benjamin <davidben@google.com>
Partially fixes build with -Wmissing-prototypes.
Change-Id: I828bcfb49b23c5a9ea403038bc3fb76750556ef8
Signed-off-by: Piotr Sikora <piotrsikora@google.com>
Reviewed-on: https://boringssl-review.googlesource.com/7514
Reviewed-by: David Benjamin <davidben@google.com>
Partially fixes build with -Wmissing-prototypes.
Change-Id: If04d8fe7cbf068883485e95bd5ea6cdab6743e46
Signed-off-by: Piotr Sikora <piotrsikora@google.com>
Reviewed-on: https://boringssl-review.googlesource.com/7513
Reviewed-by: David Benjamin <davidben@google.com>
Partially fixes build with -Wmissing-prototypes -Wmissing-declarations.
Change-Id: I51209c30f532899f57cfdd9a50cff0a8ee3da5b5
Signed-off-by: Piotr Sikora <piotrsikora@google.com>
Reviewed-on: https://boringssl-review.googlesource.com/7512
Reviewed-by: David Benjamin <davidben@google.com>
Partially fixes build with -Wmissing-prototypes -Wmissing-declarations.
Change-Id: I6048f5b7ef31560399b25ed9880156bc7d8abac2
Signed-off-by: Piotr Sikora <piotrsikora@google.com>
Reviewed-on: https://boringssl-review.googlesource.com/7511
Reviewed-by: David Benjamin <davidben@google.com>
Change-Id: I44aa9be26ad9aea6771cb46a886a721b4bc28fde
Signed-off-by: Piotr Sikora <piotrsikora@google.com>
Reviewed-on: https://boringssl-review.googlesource.com/7510
Reviewed-by: David Benjamin <davidben@google.com>
Change-Id: I9c5e66c34d0f1b735c69d033daee5d312e3c2fe7
Reviewed-on: https://boringssl-review.googlesource.com/7410
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
(Imported from upstream's 2460c7f13389d766dd65fa4e14b69b6fbe3e4e3b.)
This is a no-op for us, but avoid a diff with upstream.
Change-Id: I6e875704a38dcd9339371393a4dd523647aeef44
Reviewed-on: https://boringssl-review.googlesource.com/7491
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
(Imported from upstream's 01c32b5e448f6d42a23ff16bdc6bb0605287fa6f.)
Change-Id: Ib52278dbbac1ed1ad5c80f0ad69e34584d411cec
Reviewed-on: https://boringssl-review.googlesource.com/7461
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Not all assemblers of "gas" flavour handle binary constants, e.g.
seasoned MacOS Xcode doesn't, so give them a hand.
(Imported from upstream's ba26fa14556ba49466d51e4d9e6be32afee9c465.)
Change-Id: I35096dc8035e06d2fbef2363b869128da206ff9d
Reviewed-on: https://boringssl-review.googlesource.com/7459
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Change-Id: I6267c9bfb66940d0b6fe5368514210a058ebd3cc
Reviewed-on: https://boringssl-review.googlesource.com/7494
Reviewed-by: Emily Stark (Dunn) <estark@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
For time_t and struct tm.
BUG=595118
Change-Id: I6c7f05998887ed2bd3fb56c83ac543894ef27fe6
Reviewed-on: https://boringssl-review.googlesource.com/7462
Reviewed-by: Emily Stark (Dunn) <estark@google.com>
Reviewed-by: Nico Weber <thakis@chromium.org>
Reviewed-by: David Benjamin <davidben@google.com>
Having a different API for this case than upstream is more trouble than is
worth it. This is sad since the new API avoids incomplete EC_GROUPs at least,
but I don't believe supporting this pair of functions will be significantly
more complex than supporting EC_GROUP_new_arbitrary even when we have static
EC_GROUPs.
For now, keep both sets of APIs around, but we'll be able to remove the scar
tissue once Conscrypt's complex dependencies are resolved.
Make the restored EC_GROUP_set_generator somewhat simpler than before by
removing the ability to call it multiple times and with some parameters set to
NULL. Keep the test.
Change-Id: I64e3f6a742678411904cb15c0ad15d56cdae4a73
Reviewed-on: https://boringssl-review.googlesource.com/7432
Reviewed-by: David Benjamin <davidben@google.com>
I messed up a few of these.
ASN1_R_UNSUPPORTED_ALGORITHM doesn't exist. X509_R_UNSUPPORTED_ALGORITHM does
exist as part of X509_PUBKEY_set, but the SPKI parser doesn't emit this. (I
don't mind the legacy code having really weird errors, but since EVP is now
limited to things we like, let's try to keep that clean.) To avoid churn in
Conscrypt, we'll keep defining X509_R_UNSUPPORTED_ALGORITHM, but not actually
do anything with it anymore. Conscrypt was already aware of
EVP_R_UNSUPPORTED_ALGORITHM, so this should be fine. (I don't expect
EVP_R_UNSUPPORTED_ALGORITHM to go away. The SPKI parsers we like live in EVP
now.)
A few other ASN1_R_* values didn't quite match upstream, so make those match
again. Finally, I got some of the rsa_pss.c values wrong. Each of those
corresponds to an (overly specific) RSA_R_* value in upstream. However, those
were gone in BoringSSL since even the initial commit. We placed the RSA <-> EVP
glue in crypto/evp (so crypto/rsa wouldn't depend on crypto/evp) while upstream
placed them in crypto/rsa.
Since no one seemed to notice the loss of RSA_R_INVALID_SALT_LENGTH, let's undo
all the cross-module errors inserted in crypto/rsa. Instead, since that kind of
specificity is not useful, funnel it all into X509_R_INVALID_PSS_PARAMETERS
(formerly EVP_R_INVALID_PSS_PARAMETERS, formerly RSA_R_INVALID_PSS_PARAMETERS).
Reset the error codes for all affected modules.
(That our error code story means error codes are not stable across this kind of
refactoring is kind of a problem. Hopefully this will be the last of it.)
Change-Id: Ibfb3a0ac340bfc777bc7de6980ef3ddf0a8c84bc
Reviewed-on: https://boringssl-review.googlesource.com/7458
Reviewed-by: Emily Stark (Dunn) <estark@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Also fix a long/unsigned-long cast. (ssl_get_message returns long. It really
shouldn't, but ssl_get_message needs much more work than just a long -> size_t
change, so leave it as long for now.)
Change-Id: Ice8741f62a138c0f35ca735eedb541440f57e114
Reviewed-on: https://boringssl-review.googlesource.com/7457
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Found by libFuzzer.
Change-Id: Ifa343a184cc65f71fb6591d290b2d47d24a2be80
Reviewed-on: https://boringssl-review.googlesource.com/7456
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
OpenSSL historically made some poor API decisions. Rather than returning a
status enum in SSL_read, etc., these functions must be paired with
SSL_get_error which determines the cause of the last error's failure. This
requires SSL_read communicate with SSL_get_error with some stateful flag,
rwstate.
Further, probably as workarounds for bugs elsewhere, SSL_get_error does not
trust rwstate. Among other quirks, if the error queue is non-empty,
SSL_get_error overrides rwstate and returns a value based on that. This
requires that SSL_read, etc., be called with an empty error queue. (Or we hit
one of the spurious ERR_clear_error calls in the handshake state machine,
likely added as further self-workarounds.)
Since requiring callers consistently clear the error queue everywhere is
unreasonable (crbug.com/567501), clear ERR_clear_error *once* at the entry
point. Until/unless[*] we make SSL_get_error sane, this is the most reasonable
way to get to the point that clearing the error queue on error is optional.
With those in place, the calls in the handshake state machine are no longer
needed. (I suspect all the ERR_clear_system_error calls can also go, but I'll
investigate and think about that separately.)
[*] I'm not even sure it's possible anymore, thanks to the possibility of
BIO_write pushing to the error queue.
BUG=567501,593963
Change-Id: I564ace199e5a4a74b2554ad3335e99cd17120741
Reviewed-on: https://boringssl-review.googlesource.com/7455
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
This reverts commit ba70118d8e. Reverting this
did not resolve the regression and the cause is now known.
BUG=593963
Change-Id: Ic5e24b74e8f16b01d9fdd80f267a07ef026c82cf
Reviewed-on: https://boringssl-review.googlesource.com/7454
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
People seem to condition on these a lot. Since this code has now been moved
twice, just make them all cross-module errors rather than leave a trail of
renamed error codes in our wake.
Change-Id: Iea18ab3d320f03cf29a64a27acca119768c4115c
Reviewed-on: https://boringssl-review.googlesource.com/7431
Reviewed-by: Emily Stark (Dunn) <estark@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
If the values of any of the coordinates in the output point |r| were
negative during nistz256 multiplication, then the calls to
|bn_set_word| would result in the wrong coordinates being returned
(the negatives of the correct coordinates would be returned instead).
Fix that.
Change-Id: I6048e62f76dca18f625650d11ef5a051c9e672a4
Reviewed-on: https://boringssl-review.googlesource.com/7442
Reviewed-by: David Benjamin <davidben@google.com>
The (internal) constant-time callers of this function already do a
constant-time reduction before calling. And, nobody should be calling
this function with out-of-range coordinates anyway. So, just require
valid coordinates as input.
Further, this function is rarely called, so don't bother with the
optimization to avoid encoding Montgomery encoding of 1 for the Z
coordinate.
Change-Id: I637ffaf4d39135ca17214915b9a8582ea052eea8
Reviewed-on: https://boringssl-review.googlesource.com/7441
Reviewed-by: David Benjamin <davidben@google.com>
Don't try to fix a bad |x| coordinate by reducing it. Instead, just
fail. This also makes the code clearer; in particular, it was confusing
why |x_| was used for some calculations when it seems like |x| was just
as good or better.
Change-Id: I9a6911f0d2bd72852a26b46f3828eb5ba3ef924f
Reviewed-on: https://boringssl-review.googlesource.com/7440
Reviewed-by: David Benjamin <davidben@google.com>
Align all unexpected messages on SSL_R_UNEXPECTED_MESSAGE. Make the SSL 3.0
case the exceptional case. In doing so, make sure the SSL 3.0
SSL_VERIFY_FAIL_IF_NO_PEER_CERT case has its own test as that's a different
handshake shape.
Change-Id: I1a539165093fbdf33e2c1b25142f058aa1a71d83
Reviewed-on: https://boringssl-review.googlesource.com/7421
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
If we're doing substring matching, we should at least include the delimiter.
Change-Id: I98bee568140d0304bbb6a2788333dbfca044114c
Reviewed-on: https://boringssl-review.googlesource.com/7420
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
The old logic was quite messy and grew a number of no-ops over the
years. It was also unreasonably fond of the variable name |i|.
The current logic wasn't even correct. It's overly fond of sending no
certificate, even when it pushes errors on the error queue for a fatal
error.
Change-Id: Ie5b2b38dd309f535af1d17fa261da7dc23185866
Reviewed-on: https://boringssl-review.googlesource.com/7418
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
In TLS, you never skip the Certificate message. It may be empty, but its
presence is determined by CertificateRequest. (This is sensible.)
In SSL 3.0, the client omits the Certificate message. This means you need to
probe and may receive either Certificate or ClientKeyExchange (thankfully,
ClientKeyExchange is not optional, or we'd have to probe at ChangeCipherSpec).
We didn't have test coverage for this, despite some of this logic being a
little subtle asynchronously. Fix this.
Change-Id: I149490ae5506f02fa0136cb41f8fea381637bf45
Reviewed-on: https://boringssl-review.googlesource.com/7419
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
We never heap-allocate a GCM128_CONTEXT.
Change-Id: I7e89419ce4d81c1598a4b3a214c44dbbcd709651
Reviewed-on: https://boringssl-review.googlesource.com/7430
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Also add no-certificate cases to the state machine coverage tests.
Change-Id: I88a80df6f3ea69aabc978dd356abcb9e309e156f
Reviewed-on: https://boringssl-review.googlesource.com/7417
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Change-Id: I5b38e2938811520f52ece6055245248c80308b4d
Reviewed-on: https://boringssl-review.googlesource.com/7416
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Although exactly one iteration of cmov_cached will always initialize selected,
it ends up messing with uninitialized memory. Initialize |selected| before the
loop.
BUG=593540
Change-Id: I5921843f68c6dd1dc7f752538825bc43ba75df4a
Reviewed-on: https://boringssl-review.googlesource.com/7415
Reviewed-by: Arnar Birgisson <arnarb@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
This makes building OpenLDAP easier.
Change-Id: Id64699f95477fb8fb98957027c97070ebf41f4b1
Reviewed-on: https://boringssl-review.googlesource.com/7407
Reviewed-by: David Benjamin <davidben@google.com>
This makes building OpenLDAP easier.
Change-Id: Ic1c5bcb2ec35c61c048e780ebc56db033d8382d8
Reviewed-on: https://boringssl-review.googlesource.com/7406
Reviewed-by: David Benjamin <davidben@google.com>
Built from:
92c83ad8a4fd6224cf6319a60b399854f55b38ebe9d297c942408b792b1a9efa cmake-3.5.0.tar.gz
Update instructions in the UPDATING file.
Change-Id: I49d3f5ef353347c446a04797719227e9793e3e0d
Reviewed-on: https://boringssl-review.googlesource.com/7414
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
See 0d5e080ab9 for the previous version. Include
instructions on where to get the tools used.
807f96230c889b10f2957a47585426af4cdb116a8a77f1caecca83b7d7ab862b cmake-3.5.0-win32-x86.zip
e6bb5c3e4d936bb1067560a58a21260693a0fbe34e55afb0111fe14f7eebc92c strawberry-perl-5.22.1.2-32bit-portable.zip
Change-Id: I504cf779abce26087d09c0c974fb481886c9c459
Reviewed-on: https://boringssl-review.googlesource.com/7413
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Update the easy ones here. Also include instructions on how to do this. The
.sha1 files will be updated separately with instructions.
Change-Id: I2a3aba43b8ffbdf930b8a2602dc1460077f6d0e7
Reviewed-on: https://boringssl-review.googlesource.com/7412
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
libdecrepit wants some symbols visible. Also a build file typo.
Change-Id: I670d2324ab9048f84e7f80afdefc98cbab80335d
Reviewed-on: https://boringssl-review.googlesource.com/7411
Reviewed-by: Adam Langley <agl@google.com>
Interestingly, Windows caught this with:
..\decrepit\obj\obj_decrepit.c(33) : warning C4090: 'function' : different 'const' qualifiers
However, the value of |name| isn't const, only the thing that it points
to. So this seems like a bug in MSVC, but I'm ok with it this time.
Change-Id: I076f98339cb0b669a4f592fba89aafc0a580efc4
Reviewed-on: https://boringssl-review.googlesource.com/7404
Reviewed-by: David Benjamin <davidben@google.com>
Steven Valdez
David Benjamin
Brian Smith
Piotr Sikora
Emily Stark
Adam Langley