Start exercising the various async callbacks, starting with channel ID. These
will run under the existing state machine coverage tests; -async will also
enable every asynchronous callback we can.
Change-Id: I173148d93d3a9c575b3abc3e2aceb77968b88f0e
Reviewed-on: https://boringssl-review.googlesource.com/3342
Reviewed-by: Adam Langley <agl@google.com>
bssl_shim rather needs it. It doesn't even free the SSL* properly most of the
time. Now that it does, this opens the door to running malloc tests under
a leak checker (because it's just not slow enough right now).
Change-Id: I37d2004de27180c41b42a6d9e5aea02caf9b8b32
Reviewed-on: https://boringssl-review.googlesource.com/3340
Reviewed-by: Adam Langley <agl@google.com>
The new V2ClientHello sniff asserts, for safety, that nothing else has
initialized the record layer before it runs. However, OpenSSL allows you to
avoid explicitly calling SSL_connect/SSL_accept and instead let
SSL_read/SSL_write implicitly handshake for you. This check happens at a fairly
low-level in the ssl3_read_bytes function, at which point the record layer has
already been initialized.
Add some tests to ensure this mode works.
(Later we'll lift the handshake check to a higher-level which is probably
simpler.)
Change-Id: Ibeb7fb78e5eb75af5411ba15799248d94f12820b
Reviewed-on: https://boringssl-review.googlesource.com/3334
Reviewed-by: Adam Langley <agl@google.com>
This extends the packet adaptor protocol to send three commands:
type command =
| Packet of []byte
| Timeout of time.Duration
| TimeoutAck
When the shim processes a Timeout in BIO_read, it sends TimeoutAck, fails the
BIO_read, returns out of the SSL stack, advances the clock, calls
DTLSv1_handle_timeout, and continues.
If the Go side sends Timeout right between sending handshake flight N and
reading flight N+1, the shim won't read the Timeout until it has sent flight
N+1 (it only processes packet commands in BIO_read), so the TimeoutAck comes
after N+1. Go then drops all packets before the TimeoutAck, thus dropping one
transmit of flight N+1 without having to actually process the packets to
determine the end of the flight. The shim then sees the updated clock, calls
DTLSv1_handle_timeout, and re-sends flight N+1 for Go to process for real.
When dropping packets, Go checks the epoch and increments sequence numbers so
that we can continue to be strict here. This requires tracking the initial
sequence number of the next epoch.
The final Finished message takes an additional special-case to test. DTLS
triggers retransmits on either a timeout or seeing a stale flight. OpenSSL only
implements the former which should be sufficient (and is necessary) EXCEPT for
the final Finished message. If the peer's final Finished message is lost, it
won't be waiting for a message from us, so it won't time out anything. That
retransmit must be triggered on stale message, so we retransmit the Finished
message in Go.
Change-Id: I3ffbdb1de525beb2ee831b304670a3387877634c
Reviewed-on: https://boringssl-review.googlesource.com/3212
Reviewed-by: Adam Langley <agl@google.com>
This is so the tests needn't be sensitive to the clock. It is, unfortunately, a
test-only hook, but the DTLS retransmit/timeout logic more-or-less requires it
currently. Use this hook to, for now, freeze the clock at zero. This makes the
tests deterministic.
It might be worth designing a saner API in the future. The current one,
notably, requires that the caller's clock be compatible with the one we
internally use. It's also not clear whether the caller needs to call
DTLSv1_handle_timeout or can just rely on the state machine doing it internally
(as it does do). But mock clocks are relatively tame and WebRTC wants to
compile against upstream OpenSSL for now, so we're limited in how much new API
we can build.
Change-Id: I7aad51570596f69275ed0fc1a8892393e4b7ba13
Reviewed-on: https://boringssl-review.googlesource.com/3210
Reviewed-by: Adam Langley <agl@google.com>
Including string.h in base.h causes any file that includes a BoringSSL
header to include string.h. Generally this wouldn't be a problem,
although string.h might slow down the compile if it wasn't otherwise
needed. However, it also causes problems for ipsec-tools in Android
because OpenSSL didn't have this behaviour.
This change removes string.h from base.h and, instead, adds it to each
.c file that requires it.
Change-Id: I5968e50b0e230fd3adf9b72dd2836e6f52d6fb37
Reviewed-on: https://boringssl-review.googlesource.com/3200
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
This regressed in fcf25833bc. 0 return code on
unclean shutdown means the underlying BIO returned EOF, didn't push any error
code, but we haven't seen close_notify yet. The intent seems to be that you go
check errno or some BIO-specific equivalent if you care about close_notify.
Make sure test code routes all SSL_read return codes through SSL_get_error
since that's supposed to work in all cases.
(Note that rv == 0 can still give SSL_ERROR_SSL if the error queue is not
empty.)
Change-Id: I45bf9614573f876d93419ce169a4e0d9ceea9052
Reviewed-on: https://boringssl-review.googlesource.com/2981
Reviewed-by: Adam Langley <agl@google.com>
The minimum MTU (not consistently enforced) is just under 256, so it's
difficult to test everything, but this is a basic test. (E.g., without renego,
the only handshake message with encryption is Finished which fits in the MTU.)
It tests the server side because the Certificate message is large enough to
require fragmentation.
Change-Id: Ida11f1057cebae2b800ad13696f98bb3a7fbbc5e
Reviewed-on: https://boringssl-review.googlesource.com/2824
Reviewed-by: Adam Langley <agl@google.com>
This makes SSLv23_method go through DTLS_ANY_VERSION's version negotiation
logic. This allows us to get rid of duplicate ClientHello logic. For
compatibility, SSL_METHOD is now split into SSL_PROTOCOL_METHOD and a version.
The legacy version-locked methods set min_version and max_version based this
version field to emulate the original semantics.
As a bonus, we can now handle fragmented ClientHello versions now.
Because SSLv23_method is a silly name, deprecate that too and introduce
TLS_method.
Change-Id: I8b3df2b427ae34c44ecf972f466ad64dc3dbb171
Amend the version negotiation tests to test this new spelling of max_version.
min_version will be tested in a follow-up.
Change-Id: Ic4bfcd43bc4e5f951140966f64bb5fd3e2472b01
Reviewed-on: https://boringssl-review.googlesource.com/2583
Reviewed-by: Adam Langley <agl@google.com>
The ClientHello record is padded to 1024 bytes when
fastradio_padding is enabled. As a result, the 3G cellular radio
is fast forwarded to DCH (high data rate) state. This mechanism
leads to a substantial redunction in terms of TLS handshake
latency, and benefits mobile apps that are running on top of TLS.
Change-Id: I3d55197b6d601761c94c0f22871774b5a3dad614
MSVC doesn't like it when you compare the two.
Change-Id: I03c5ff2e2668ac2e536de8278e3a7c98a3dfd117
Reviewed-on: https://boringssl-review.googlesource.com/2460
Reviewed-by: Adam Langley <agl@google.com>
Supporting both schemes seems pointless. Now that s->server and s->state are
set appropriately late and get_ssl_method is gone, the only difference is that
the client/server ones have non-functional ssl_accept or ssl_connect hooks. We
can't lose the generic ones, so let's unify on that.
Note: this means a static linker will no longer drop the client or server
handshake code if unused by a consumer linking statically. However, Chromium
needs the server half anyway for DTLS and WebRTC, so that's probably a lost
cause. Android also exposes server APIs.
Change-Id: I290f5fb4ed558f59fadb5d1f84e9d9c405004c23
Reviewed-on: https://boringssl-review.googlesource.com/2440
Reviewed-by: Adam Langley <agl@google.com>
SSL_clear sets s->state and dtls1_clear sets cookie_len on the server. Setting
cookie_len on the server seems to serve no purpose but to let the callback know
how large the buffer is. This can be done just before calling the callback.
It also avoids a bug where the cookie check can be bypassed, should the server
not specify an app_verify_cookie_cb, by supplying a cookie of all zeros of the
maximum size. (Zero is fine because an empty cookie is rejected.)
The goal here is to avoid needing the SSL_clear calls in the handshake
functions. They are currently needed to fix the cookie_len setting when using
the generic method. (They get set wrong and then flipped back.)
Change-Id: I5095891bc0f7df62d83a9c84312fcf0b84826faa
Reviewed-on: https://boringssl-review.googlesource.com/2435
Reviewed-by: Adam Langley <agl@google.com>
This fixes bugs that kept the tests from working:
- Resolve DTLS version and cookie before the session.
- In DTLS_ANY_VERSION, ServerHello should be read with first_packet = 1. This
is a regression from f2fedefdca. We'll want to
do the same for TLS, but first let's change this to a boolean has_version in a
follow-up.
Things not yet fixed:
- DTLS code is not EVP_AEAD-aware. Those ciphers are disabled for now.
- On the client, DTLS_ANY_VERSION creates SSL_SESSIONs with the wrong
ssl_version. The tests pass because we no longer enforce the match as of
e37216f56009fbf48c3a1e733b7a546ca6dfc2af. (In fact, we've gone from the server
ignoring ssl_version and client enforcing to the client mostly ignoring
ssl_version and the server enforcing.)
- ssl3_send_client_hello's ssl_version check checks for equality against
s->version rather than >.
Change-Id: I5a0dde221b2009413df9b9443882b9bf3b29519c
Reviewed-on: https://boringssl-review.googlesource.com/2403
Reviewed-by: Adam Langley <agl@google.com>
We forgot to add those when we implemented the features. (Also relevant because
they will provide test coverage later for configuring features when using the
generic method tables rather than *_client_method.)
Change-Id: Ie08b27de893095e01a05a7084775676616459807
Reviewed-on: https://boringssl-review.googlesource.com/2410
Reviewed-by: Adam Langley <agl@google.com>
The ex_data index may fail to be allocated. Also don't leave a dangling pointer
in handshake_dgst if EVP_DigestInit_ex fails and check a few more init function
failures.
Change-Id: I2e99a89b2171c9d73ccc925a2f35651af34ac5fb
Reviewed-on: https://boringssl-review.googlesource.com/2342
Reviewed-by: Adam Langley <agl@google.com>
This commit fixes a number of crashes caused by malloc failures. They
were found using the -malloc-test=0 option to runner.go which runs tests
many times, causing a different allocation call to fail in each case.
(This test only works on Linux and only looks for crashes caused by
allocation failures, not memory leaks or other errors.)
This is not the complete set of crashes! More can be found by collecting
core dumps from running with -malloc-test=0.
Change-Id: Ia61d19f51e373bccb7bc604642c51e043a74bd83
Reviewed-on: https://boringssl-review.googlesource.com/2320
Reviewed-by: Adam Langley <agl@google.com>
Just the negotiation portion as everything else is external. This feature is
used in WebRTC.
Change-Id: Iccc3983ea99e7d054b59010182f9a56a8099e116
Reviewed-on: https://boringssl-review.googlesource.com/2310
Reviewed-by: Adam Langley <agl@google.com>
These'll get removed once most of renego support is gone, but this is to prove
removing the warning alert from the previous commit still prevents legacy
renegotiations.
Change-Id: I7d9d95e1d4c5d23d3b6d170938a5499a65f2d5ea
Reviewed-on: https://boringssl-review.googlesource.com/2236
Reviewed-by: Adam Langley <agl@google.com>
This change adds support to the Go code for renegotiation as a client,
meaning that we can test BoringSSL's renegotiation as a server.
Change-Id: Iaa9fb1a6022c51023bce36c47d4ef7abee74344b
Reviewed-on: https://boringssl-review.googlesource.com/2082
Reviewed-by: Adam Langley <agl@google.com>
Only the three plain PSK suites for now. ECDHE_PSK_WITH_AES_128_GCM_SHA256 will
be in a follow-up.
Change-Id: Iafc116a5b2798c61d90c139b461cf98897ae23b3
Reviewed-on: https://boringssl-review.googlesource.com/2051
Reviewed-by: Adam Langley <agl@google.com>
Both as client and as server. Also tests that ALPN causes False Start to kick
in.
Change-Id: Ib570346f3c511834152cd2df2ef29541946d3ab4
Reviewed-on: https://boringssl-review.googlesource.com/1753
Reviewed-by: Adam Langley <agl@google.com>
Notably, this would have caught ed8270a55c
(although, apart from staring at code coverage, knowing to set resumeSession on
the server test isn't exactly obvious). Perhaps we should systematically set it
on all extension server tests; ClientHello extension parsing happens after
resumption has been determined and is often sensitive to it.
Change-Id: Ie83f294a26881a6a41969e9dbd102d0a93cb68b5
Reviewed-on: https://boringssl-review.googlesource.com/1750
Reviewed-by: Adam Langley <agl@google.com>
If this is part of SSL_OP_ALL, we should have a test for it.
Change-Id: Ia72422beb2da6434726e78e174f3416f90f7c897
Reviewed-on: https://boringssl-review.googlesource.com/1695
Reviewed-by: Adam Langley <agl@google.com>
Change-Id: Ia0daaaaf464cfa0e9d563d7f376ce2bb2e338685
Reviewed-on: https://boringssl-review.googlesource.com/1560
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
This removes some duplicate code in parsing command-line flags and, more
importantly, makes configuration available when constructing the SSL_CTX and
avoids a number of globals.
Change-Id: I26e2d2285b732f855a2c82752bc8e0db480c3b30
Reviewed-on: https://boringssl-review.googlesource.com/1502
Reviewed-by: Adam Langley <agl@google.com>
Windows doesn't have ssize_t, sadly. There's SSIZE_T, but defining an
OPENSSL_SSIZE_T seems worse than just using an int.
Change-Id: I09bb5aa03f96da78b619e551f92ed52ce24d9f3f
Reviewed-on: https://boringssl-review.googlesource.com/1352
Reviewed-by: Adam Langley <agl@google.com>
Test all pairs of client and server version, except for the ones that require
SSLv3 client support in runner.go. That is, as yet, still missing.
Change-Id: I601ab49c5526cd2eb4f85d5d535570e32f218d5b
Reviewed-on: https://boringssl-review.googlesource.com/1450
Reviewed-by: Adam Langley <agl@google.com>
When the write size was exactly SSL3_RT_MAX_PLAIN_LENGTH+1 and record
splitting is needed, an extra byte would be added to the max size of the
message to be written. This would cause the requested size to not exceed
the max. If the SSL_WANT_WRITE error were returned, the next packet
would not get the extra byte added to the max packet size since
record_split_done is set. Since a different set of arguments
(SSL3_RT_MAX_PLAIN_LENGTH+1 vs SSL3_RT_MAX_PLAIN_LENGTH) would be passed
to do_ssl3_write, it would return an "SSL3_WRITE_PENDING:bad write
retry" error.
To avoid a failure in the opposite direction, the max variable increment
is removed as well. This can happen when SSL_MODE_ENABLE_PARTIAL_WRITE
is not enabled and the call to ssl3_write_bytes contains, e.g., a buffer
of 2*SSL3_RT_MAX_PLAIN_LENGTH, where the first call into do_ssl3_write
succeeds writing the first SSL3_RT_MAX_PLAIN_LENGTH bytes, but writing
the second SSL3_RT_MAX_PLAIN_LENGTH bytes fails. This means the first
time the the second section of SSL3_RT_MAX_PLAIN_LENGTH bytes has called
do_ssl3_write with "max" bytes, but next call to ssl3_write_bytes in
turn calls into do_ssl3_write with "max+1" bytes.
Change-Id: Icf8453195c1145a54d31b8e8146801118207df03
Reviewed-on: https://boringssl-review.googlesource.com/1420
Reviewed-by: Kenny Root <kroot@google.com>
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
Add a framework for testing the asynchronous codepath. Move some handshake
state machine coverage tests to cover a range of record-layer and
handshake-layer asynchronicity.
This adds tests for the previous two async bugs fixed.
Change-Id: I422ef33ba3eeb0ad04766871ed8bc59b677b169e
Reviewed-on: https://boringssl-review.googlesource.com/1410
Reviewed-by: Adam Langley <agl@google.com>
Use it to test DHE-RSA in BoringSSL.
Change-Id: I88f7bfa76507a6f60234d61d494c9f94b7df4e0a
Reviewed-on: https://boringssl-review.googlesource.com/1377
Reviewed-by: Adam Langley <agl@google.com>
One of the state transitions wasn't rewritten to CR_CHANGE. Add a test to
exercise this codepath. Also SSL_cutthrough_complete references the state.
Change-Id: Ib2f7ac5ac3f0348864efa93cf13cfd87454572f0
Reviewed-on: https://boringssl-review.googlesource.com/1337
Reviewed-by: Adam Langley <agl@google.com>
The shim is now passed two file descriptors. In a session resumption test, the
second is used in an abbreviated handshake immediately after the first.
Change-Id: I1f348c05f1a8ff2881fb46fc9e869696f74071c6
Reviewed-on: https://boringssl-review.googlesource.com/1291
Reviewed-by: Adam Langley <agl@google.com>
Also fix some DTLS cookie bugs. rcvd_cookie is never referenced after being
saved (and the length isn't saved, so it couldn't be used anyway), and the
cookie verification failed to check the length.
For convenience, add a CBS_mem_equal helper function. Saves a bit of
repetition.
Change-Id: I187137733b069f0ac8d8b1bf151eeb80d388b971
Reviewed-on: https://boringssl-review.googlesource.com/1174
Reviewed-by: Adam Langley <agl@google.com>
Resolve one of the TODOs since it's quick. Adjust the
-expect-server-name test to assert it both in the normal codepath and
in the early callback, to provide test coverage for
SSL_early_callback_ctx_extension_get.
Change-Id: I4d71158b9fd2f4fbb54d3e51184bd25d117bdc91
Reviewed-on: https://boringssl-review.googlesource.com/1120
Reviewed-by: Adam Langley <agl@google.com>
client_shim.cc and runner.go are generalized to handle both ends. Plumb a bit
through the test case to control which and add server versions of all the
cipher suite tests.
Change-Id: Iab2640b390f7ed7160c9a9bf6bb34b8bec761b2e
Reviewed-on: https://boringssl-review.googlesource.com/1091
Reviewed-by: Adam Langley <agl@google.com>
