b9cc33a4d6 deleted its documentation rather than
SSL_OP_EPHEMERAL_RSA's.
Change-Id: I2e099a2dc498f145c5a3ccaac824edbda27f7e89
Reviewed-on: https://boringssl-review.googlesource.com/2407
Reviewed-by: Adam Langley <agl@google.com>
They're mapped to the same value, which is the only reason the tests work right
now.
Change-Id: I22f6e3a6b3a2c88b0f92b6d261e86111b4172cd6
Reviewed-on: https://boringssl-review.googlesource.com/2406
Reviewed-by: Adam Langley <agl@google.com>
This is a bit of cleanup that probably should have been done at the same time
as 30ddb434bf.
For now, version negotiation is implemented with a method swap. It also
performs this swap on SSL_set_session, but this was neutered in
30ddb434bf. Rather than hackishly neuter it,
remove it outright. In addition, remove SSL_set_ssl_method. Now all method
swaps are internal: SSLv23_method switch to a version-specific method and
SSL_clear undoing it.
Note that this does change behavior: if an SSL* is created with one
version-specific method and we SSL_set_session to a session from a /different/
version, we would switch to the /other/ version-specific method. This is
extremely confusing, so it's unlikely anyone was actually expecting it.
Version-specific methods in general don't work well.
Change-Id: I72a5c1f321ca9aeb1b52ebe0317072950ba25092
Reviewed-on: https://boringssl-review.googlesource.com/2390
Reviewed-by: Adam Langley <agl@google.com>
The data is owned by the SSL_SESSION, so the caller should not modify it. This
will require changes in Chromium, but they should be trivial.
Change-Id: I314718530c7d810f7c7b8852339b782b4c2dace1
Reviewed-on: https://boringssl-review.googlesource.com/2409
Reviewed-by: Adam Langley <agl@google.com>
This is only used for EAP-FAST which we apparently don't need to support.
Remove it outright. We broke it in 9eaeef81fa by
failing to account for session misses.
If this changes and we need it later, we can resurrect it. Preferably
implemented differently: the current implementation is bolted badly onto the
handshake. Ideally use the supplied callbacks to fabricate an appropriate
SSL_SESSION and resume that with as much of the normal session ticket flow as
possible.
The one difference is that EAP-FAST seems to require the probing mechanism for
session tickets rather than the sane session ID echoing version. We can
reimplement that by asking the record layer to probe ahead for one byte.
Change-Id: I38304953cc36b2020611556a91e8ac091691edac
Reviewed-on: https://boringssl-review.googlesource.com/2360
Reviewed-by: Adam Langley <agl@google.com>
Both of these are newly-exported in OpenSSL 1.0.2, so they cannot be used by
current consumers.
This was added in upstream's 18d7158809c9722f4c6d2a8af7513577274f9b56 to
support custom selection of certificates. The intent seems to be that you
listen to cert_cb and use SSL_check_chain to lean on OpenSSL to process
signature algorithms list for you.
Unfortunately, the implementation is slightly suspect: it uses the same
function as the codepath which mutates and refers to the CERT_PKEY of the
matching type. Some access was guarded by check_flags, but this is too
complex. Part of it is also because the matching digest is selected early and
we intend to connect this to EVP_PKEY_supports_digest so it is no longer a
property of just the key type.
Let's remove the hook for now, to unblock removing a lot of complexity. After
cleaning up this area, a function like this could be cleaner to support, but
we already have a version of this: select_certificate_cb and
ssl_early_callback_ctx.
Change-Id: I3add425b3996e5e32d4a88e14cc607b4fdaa5aec
Reviewed-on: https://boringssl-review.googlesource.com/2283
Reviewed-by: Adam Langley <agl@google.com>
This is maintained just to distinguish whether the digest was negotiated or we
simply fell back to assuming SHA-1 support. No code is sensitive to this flag
and it adds complexity because it is set at a different time, for now, from the
rest of valid_flags.
The flag is new in OpenSSL 1.0.2, so nothing external could be sensitive to it.
Change-Id: I9304e358d56f44d912d78beabf14316d456bf389
Reviewed-on: https://boringssl-review.googlesource.com/2282
Reviewed-by: Adam Langley <agl@google.com>
This is new in OpenSSL 1.0.2 so it isn't used anywhere. Cuts down slightly on
connection-global state associated with signature algorithm processing.
Repurposing the digest field to mean both "the digest we choose to sign with
this key" and "the digest the last signature we saw happened to use" is
confusing.
Change-Id: Iec4d5078c33e271c8c7b0ab221c356ee8480b89d
Reviewed-on: https://boringssl-review.googlesource.com/2281
Reviewed-by: Adam Langley <agl@google.com>
Prior to this change, BoringSSL maintained a 2-byte buffer for alerts,
and would support reassembly of fragmented alerts.
NSS does not support fragmented alerts, nor would any reasonable
implementation produce them. Remove fragmented alert handling and
produce an error if a fragmented alert has ever been encountered.
Change-Id: I31530ac372e8a90b47cf89404630c1c207cfb048
Reviewed-on: https://boringssl-review.googlesource.com/2125
Reviewed-by: Adam Langley <agl@google.com>
There's not much point in retaining the identity hint in the SSL_SESSION. This
avoids the complexity around setting psk_identity hint on either the SSL or the
SSL_SESSION. Introduce a peer_psk_identity_hint for the client to store the one
received from the server.
This changes the semantics of SSL_get_psk_identity_hint; it now only returns
the value configured for the server. The client learns the hint through the
callback. This is compatible with the one use of this API in conscrypt (it
pulls the hint back out to pass to a callback).
Change-Id: I6d9131636b47f13ac5800b4451436a057021054a
Reviewed-on: https://boringssl-review.googlesource.com/2213
Reviewed-by: Adam Langley <agl@google.com>
This was added in http://rt.openssl.org/Ticket/Display.html?id=2033 to support
a mode where a DTLS socket would statelessly perform the ClientHello /
HelloVerifyRequest portion of the handshake, to be handed off to a socket
specific to this peer address.
This is not used by WebRTC or other current consumers. If we need to support
something like this, it would be cleaner to do the listen portion (cookieless
ClientHello + HelloVerifyRequest) externally and then spin up an SSL instance
on receipt of a cookied ClientHello. This would require a slightly more complex
BIO to replay the second ClientHello but would avoid peppering the DTLS
handshake state with a special short-circuiting mode.
Change-Id: I7a413932edfb62f8b9368912a9a0621d4155f1aa
Reviewed-on: https://boringssl-review.googlesource.com/2220
Reviewed-by: Adam Langley <agl@google.com>
Without SSL_MODE_AUTO_RETRY, even blocking mode will return
SSL_ERROR_WANT_{READ|WRITE} in the event of a renegotiation.
The comments in the code speak only of "nasty problems" unless this is
done. The original commit that added SSL_MODE_AUTO_RETRY
(54f10e6adce56eb2e59936e32216162aadc5d050) gives a little more detail:
The [...] behaviour is needed by applications such as s_client and
s_server that use select() to determine when to use SSL_read.
Without the -nbio flag, s_client will use select() to find when the
socket is readable and then call SSL_read with a blocking socket.
However, this will still block in the event of an incomplete record, so
the delay is already unbounded. This it's very unclear what the point of
this behaviour ever was.
Perhaps if the read and write paths were different sockets where the
read socket was non-blocking but the write socket was blocking. But that
seems like an implausible situation to worry too much about.
Change-Id: I9d9f2526afc2e0fd0e5440e9a047f419a2d61afa
Reviewed-on: https://boringssl-review.googlesource.com/2140
Reviewed-by: Adam Langley <agl@google.com>
Deprecate the old two-pass version of the function. If the ticket is too long,
replace it with a placeholder value but keep the connection working.
Change-Id: Ib9fdea66389b171862143d79b5540ea90a9bd5fb
Reviewed-on: https://boringssl-review.googlesource.com/2011
Reviewed-by: Adam Langley <agl@google.com>
No more need for all the macros. For now, this still follows the two-pass i2d_*
API despite paying a now-unnecessary malloc. The follow-on commit will expose a
more reasonable API and deprecate this one.
Change-Id: I50ec63e65afbd455ad3bcd2f1ae3c782d9e8f9d2
Reviewed-on: https://boringssl-review.googlesource.com/2000
Reviewed-by: Adam Langley <agl@google.com>
Do away with all those unreadable macros. Also fix many many memory leaks in
the SSL_SESSION reuse case. Add a number of helper functions in CBS to help
with parsing optional fields.
Change-Id: I2ce8fd0d5b060a1b56e7f99f7780997fabc5ce41
Reviewed-on: https://boringssl-review.googlesource.com/1998
Reviewed-by: Adam Langley <agl@google.com>
This was there since OpenSSL's initial commit and doesn't appear to serve any
purpose anymore. There's also an instance in x509_vfy.h, but this does not
actually appear to be a no-op because the headers include each other.
Change-Id: I6dee04538bdb3fd91a5da3c71c9d0027443b6bbc
Reviewed-on: https://boringssl-review.googlesource.com/2020
Reviewed-by: Adam Langley <agl@google.com>
There's no need to store them on the session. They're temporary handshake
state and weren't serialized in d2i_SSL_SESSION anyway.
Change-Id: I830d378ab49aaa4fc6c4c7a6a8c035e2263fb763
Reviewed-on: https://boringssl-review.googlesource.com/1990
Reviewed-by: Adam Langley <agl@google.com>
This removes the need to track the client cipher list in the SSL_SESSION. It
also eliminates a field in SSL_SESSION that wasn't serialized by
i2d_SSL_SESSION. It's only used to implement SSL_get_shared_ciphers which is
only used by debug code.
Moreover, it doesn't work anyway. The SSLv2 logic pruned that field to the
common ciphers, but the SSLv3+ logic just stores the client list as-is. I found
no internal callers that were actually compiled (if need be we can stub in
something that always returns the empty string or so).
Change-Id: I55ad45964fb4037fd623f7591bc574b2983c0698
Reviewed-on: https://boringssl-review.googlesource.com/1866
Reviewed-by: Adam Langley <agl@google.com>
We patch bugs into the runner implementation for testing, not our own.
Change-Id: I0a8ac73eaeb70db131c01a0fd9c84f258589a884
Reviewed-on: https://boringssl-review.googlesource.com/1845
Reviewed-by: Adam Langley <agl@google.com>
Android requested that the wpa_supplicant go upstream. This change adds
some dummy functions and reinstates DSA_dup_DH in order to make the diff
smaller and easier for upstream.
Change-Id: I77ac271b8652bae5a0bbe16afde51d9096f3dfb5
Reviewed-on: https://boringssl-review.googlesource.com/1740
Reviewed-by: Adam Langley <agl@google.com>
This gives inappropriate_fallback and close_notify sent during the handshake
error strings. It'd also avoid having to write
case SSL_AD_REASON_OFFSET + SSL_AD_CLOSE_NOTIFY:
in Chromium.
Change-Id: I42123d5452eb7843ead883d112e58b3f087d3067
Reviewed-on: https://boringssl-review.googlesource.com/1780
Reviewed-by: Adam Langley <agl@google.com>
Update SSL_OP_ALL to account for SSL_OP_CRYPTOPRO_TLSEXT_BUG being gone,
and update ssl3_setup_write_buffer to account for SSL_MODE_CBC_RECORD_SPLITTING
rather than the now defunct SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS.
Also remove SSL_OP_TLS_BLOCK_PADDING_BUG. This is to allow for a buggy peer
which pads CBC with N bytes of value N rather than N+1 bytes of value N. This
quirk has been broken since CBC padding checks became constant-time, as
demonstrated by this attempt at a test. (Instead of just decrementing
padding_length, it needs to also keep track of a separate padding_value and not
decrement that one.)
https://boringssl-review.googlesource.com/#/c/1690/
(The quirk would also fall over anyway if the buggy client ever did a session
resumption; then the server speaks first rather than the client, and the quirk
triggered on reading the first encrypted record from the peer.)
Change-Id: I19942dc629a47832aead77a46bb50e0b0a9780b3
Reviewed-on: https://boringssl-review.googlesource.com/1694
Reviewed-by: Adam Langley <agl@google.com>
Configures the SSL stack to log session information to a BIO. The intent is to
support NSS's SSLKEYLOGFILE environment variable. Add support for the same
environment variable to tool/client.cc.
Tested against Wireshark 1.12.0.
BUG=393477
Change-Id: I4c231f9abebf194eb2df4aaeeafa337516774c95
Reviewed-on: https://boringssl-review.googlesource.com/1699
Reviewed-by: Adam Langley <agl@google.com>
Thanks to Denis Denisov for noting that |host_name| could be used while
uninitialised in the resumption case.
While in the area, this change also renames |servername_done| to
something more reasonable and removes a documented value that was never
used. Additionally, the SNI ack was only sent when not resuming so
calculating whether it should be sent when processing ClientHello
extensions (which is after s->hit has been set) is superfluous.
Lastly, since SNI is only acked by servers, there's no need to worry
about the SNI callback returning NOACK in the client case.
Change-Id: Ie4ecfc347bd7afaf93b12526ff9311cc45da4df6
Reviewed-on: https://boringssl-review.googlesource.com/1700
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
Remove the old implementation which was excessively general. This mirrors the
SCT support and adds a single boolean flag to request an OCSP response with no
responder IDs, extensions, or frills. The response, if received, is stored on
the SSL_SESSION so that it is available for (re)validation on session
resumption; Chromium revalidates the saved auth parameters on resume.
Server support is unimplemented for now. This API will also need to be adjusted
in the future if we implement RFC 6961.
Change-Id: I533c029b7f7ea622d814d05f934fdace2da85cb1
Reviewed-on: https://boringssl-review.googlesource.com/1671
Reviewed-by: Adam Langley <agl@google.com>
Don't pollute the embedder's namespace with a session_ctx macro. It looks like
the difference was that, without TLS extensions, session_ctx was ctx rather
than initial_ctx. Now it's always initial_ctx. Retain the semantics of
switching SSL_CTX's out after the fact, until/unless we decide to replace that
with something less scary-sounding.
Change-Id: Ie5df5138aec25218ca80031cf645671968b8a54a
Reviewed-on: https://boringssl-review.googlesource.com/1663
Reviewed-by: Adam Langley <agl@google.com>
Get all this stuff out of the way.
- OPENSSL_NO_MD5
- OPENSSL_NO_SHA
- OPENSSL_NO_EC
- OPENSSL_NO_ECDSA
- OPENSSL_NO_ECDH
- OPENSSL_NO_NEXTPROTONEG
- OPENSSL_NO_DH
- OPENSSL_NO_SSL3
- OPENSSL_NO_RC4
- OPENSSL_NO_RSA
Also manually removed a couple instances of OPENSSL_NO_DSA that seemed to be
confused anyway. Did some minor manual cleanup. (Removed a few now-pointless
'if (0)'s.)
Change-Id: Id540ba97ee22ff2309ab20ceb24c7eabe766d4c4
Reviewed-on: https://boringssl-review.googlesource.com/1662
Reviewed-by: Adam Langley <agl@google.com>
This moves CertificateVerify digest processing to the new
SSL_GET_MESSAGE_DONT_HASH_MESSAGE flag. It also refactors it similarly to
ssl3_send_cert_verify and moves that logic to a common ssl3_cert_verify_hash
function to compute the handshake hash.
This removes a large chunk of duplicate (and divergent!) logic between TLS and
DTLS. It also removes TLS1_FLAGS_KEEP_HANDSHAKE.
Change-Id: Ia63c94f7d76d901bc9c4c33454fbfede411adf63
Reviewed-on: https://boringssl-review.googlesource.com/1633
Reviewed-by: Adam Langley <agl@google.com>
This replaces the special-case in ssl3_get_message for Channel ID. Also add
ssl3_hash_current_message to hash the current message, taking TLS vs DTLS
handshake header size into account.
One subtlety with this flag is that a message intended to be processed with
SSL_GET_MESSAGE_DONT_HASH_MESSAGE cannot follow an optional message
(reprocessed with reuse_message, etc.). There is an assertion to that effect.
If need be, we can loosen it to requiring that the preceeding optional message
also pass SSL_GET_MESSAGE_DONT_HASH_MESSAGE and then maintain some state to
perform the more accurate assertion, but this is sufficient for now.
Change-Id: If8c87342b291ac041a35885b9b5ee961aee86eab
Reviewed-on: https://boringssl-review.googlesource.com/1630
Reviewed-by: Adam Langley <agl@google.com>
DSA is not connected up to EVP, so it wouldn't work anyway. We shouldn't
advertise a cipher suite we don't support. Chrome UMA data says virtually no
handshakes end up negotiating one of these.
Change-Id: I874d934432da6318f05782ebd149432c1d1e5275
Reviewed-on: https://boringssl-review.googlesource.com/1566
Reviewed-by: Adam Langley <agl@google.com>
These are the variants where the CA signs a Diffie-Hellman keypair. They are
not supported by Chrome on NSS.
Change-Id: I569a7ac58454bd3ed1cd5292d1f98499012cdf01
Reviewed-on: https://boringssl-review.googlesource.com/1564
Reviewed-by: Adam Langley <agl@google.com>
This also removes the 'LOW' strength class.
Change-Id: Iffd2356dadb4a4875c1547a613d51061101358fd
Reviewed-on: https://boringssl-review.googlesource.com/1562
Reviewed-by: Adam Langley <agl@google.com>
NULL, SRP, CAMELLIA, export ciphers, SSLv2, IDEA, and SEED are gone. Unknown
directives are silently ignored in the parser, so there is no need to retain
their masks and entries in the cipher suite aliases.
Change-Id: If43b9cbce56b3e1c401db764b88996940452a300
Reviewed-on: https://boringssl-review.googlesource.com/1561
Reviewed-by: Adam Langley <agl@google.com>
This change exports SSL_cutthrough_complete and EVP_EncodedLength (which
were missed below) and also exports all ASN.1 "item" values because
Android needs that.
Change-Id: I6d10f935bb52ed6d682607a4016dd2b87758e3de
Reviewed-on: https://boringssl-review.googlesource.com/1557
Reviewed-by: Adam Langley <agl@google.com>
Just use the normal API for them.
Change-Id: Ibb5988611a86e8d39abda1e02087523d98defb51
Reviewed-on: https://boringssl-review.googlesource.com/1555
Reviewed-by: Adam Langley <agl@google.com>
I see no internal users and the existence of a THIRD version encoding
complicates all version-checking logic. Also convert another version check to
SSL_IS_DTLS that was missed earlier.
Change-Id: I60d215f57d44880f6e6877889307dc39dbf838f7
Reviewed-on: https://boringssl-review.googlesource.com/1550
Reviewed-by: Adam Langley <agl@google.com>
This lets us put the SSL_CIPHER table in the data section. For type-checking,
make STACK_OF(SSL_CIPHER) cast everything to const SSL_CIPHER*.
Note that this will require some changes in consumers which weren't using a
const SSL_CIPHER *.
Change-Id: Iff734ac0e36f9e5c4a0f3c8411c7f727b820469c
Reviewed-on: https://boringssl-review.googlesource.com/1541
Reviewed-by: Adam Langley <agl@google.com>
Of the remaining implementations left, ssl3_, dtls1_, and ssl23_, dtls1_ is
redundant and can be folded into ssl3_. ssl23_ actually isn't; it sets 5
minutes rather than 2 hours. Two hours seems to be what everything else uses
and seems a saner default. Most consumers seem to override it anyway
(SSL_CTX_set_timeout). But it is a behavior change.
The method is called at two points:
- SSL_get_default_timeout
- SSL_CTX_new
Incidentally, the latter call actually makes the former never called internally
and the value it returns a lie. SSL_get_default_timeout returns the default
timeout of the /current/ method, but in ssl_get_new_session, the timeout is
shadowed by session_timeout on the context. That is initialized when
SSL_CTX_new is called. So, unless you go out of your way to
SSL_CTX_set_timeout(0), it always overrides. (And it actually used to a
difference because, for SSL23, the SSL_CTX's method is SSL23, but, when session
creation happens, the SSL's method is the version-specific one.)
Change-Id: I331d3fd69b726242b36492402717b6d0b521c6ee
Reviewed-on: https://boringssl-review.googlesource.com/1521
Reviewed-by: Adam Langley <agl@google.com>
It was added in OpenSSL 1.0.2, so nothing can be depending on it yet. If we
really want a Suite B profile, it seems better to generate a configuration for
the rest of the system rather than pepper the codebase with checks.
Change-Id: I1be3ebed0e87cbfe236ade4174dcf5bbc7e10dd5
Reviewed-on: https://boringssl-review.googlesource.com/1517
Reviewed-by: Adam Langley <agl@google.com>
