This changes the contract for split handshakes such that on the
receiving side, the connection is to be driven until it returns
|SSL_ERROR_HANDBACK|, rather than until SSL_do_handshake() returns
success.
Change-Id: Idd1ebfbd943d88474d7c934f4c0ae757ff3c0f37
Reviewed-on: https://boringssl-review.googlesource.com/26864
Commit-Queue: Matt Braithwaite <mab@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
NSS only enables compatibility mode on the server if the client
requested it by way of the session ID. This is slightly off as a client
has no way not to request it when offering a TLS 1.2 session, but it is
in the spec.
So our tests are usable for other stacks, send a fake session ID in the
runner by default. The existing EmptySessionID-TLS13* test asserts that
BoringSSL behaves as we expect it to on empty session IDs too. The
intent is that NSS will disable that test but can otherwise leave the
rest enabled.
Change-Id: I370bf90aba1805c2f6970ceee0d29ecf199f437d
Reviewed-on: https://boringssl-review.googlesource.com/26504
Reviewed-by: Steven Valdez <svaldez@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
On reflection, I think we'll need to note whether dummy PQ padding was
echoed on a given connection. Otherwise measurements in Chrome will be
mixed with cases where people have MITM proxies that ignored the
extension, or possibly Google frontends that haven't been updated.
Therefore this change will be used to filter latency measurements in
Chrome to only include those where the extension was echoed and we'll
measure at levels of 1 byte (for control), 400 bytes, and 1100 bytes.
This also makes it an error if the server didn't echo an extension of
the same length as was sent.
Change-Id: Ib2a0b29cfb8719a75a28f3cf96710c57d88eaa68
Reviewed-on: https://boringssl-review.googlesource.com/26284
Commit-Queue: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Reviewed-by: David Benjamin <davidben@google.com>
In this round, Google servers will echo the extension in order to test
the latency of both parties sending a PQ key-agreement message.
The extension is sent (and echoed) for both full and resumption
handshakes. This is intended to mirror the overhead of TLS 1.3 (even
when using TLS 1.2), as a resumption in TLS 1.3 still does a fresh key
agreement.
Change-Id: I9ad163afac4fd1d916f9c7359ec32994e283abeb
Reviewed-on: https://boringssl-review.googlesource.com/26185
Commit-Queue: David Benjamin <davidben@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
We don't advertise compressed coordinates (and point format negotiation
was deprecated in TLS 1.3), so reject them. Both Internet Explorer and
Firefox appear to reject them already.
Later I hope to add an easier to use ECDH API that acts on bytes, not
EC_POINT. This clears the way for that API to only accept uncompressed
coordinates. Compressed coordinates never got deployed over NIST curves,
for better or worse. At this point, there is no sense in changing that
as new protocols should use curve25519.
Change-Id: Id2f1be791ddcf155d596f4eb0b79351766c5cdab
Reviewed-on: https://boringssl-review.googlesource.com/26024
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
All the patterns need to account for a possible "-Split" version now.
Change-Id: Ie1b38ce10777d61d70a4d5a8bb2d44cdc98e4bfb
Reviewed-on: https://boringssl-review.googlesource.com/25504
Reviewed-by: Adam Langley <agl@google.com>
This change adds a couple of focused tests to ssl_test.cc, but also
programmically duplicates many runner tests in a split-handshake mode.
Change-Id: I9dafc8a394581e5daf1318722e1015de82117fd9
Reviewed-on: https://boringssl-review.googlesource.com/25388
Commit-Queue: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
Change-Id: I2486dc810ea842c534015fc04917712daa26cfde
Update-Note: Now that tls13_experiment2 is gone, the server should remove the set_tls13_variant call. To avoid further churn, we'll make the server default for future variants to be what we'd like to deploy.
Reviewed-on: https://boringssl-review.googlesource.com/25104
Commit-Queue: Steven Valdez <svaldez@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Reviewed-by: David Benjamin <davidben@google.com>
This adds support for sending the quic_transport_parameters
(draft-ietf-quic-tls) in ClientHello and EncryptedExtensions, as well as
reading the value sent by the peer.
Bug: boringssl:224
Change-Id: Ied633f557cb13ac87454d634f2bd81ab156f5399
Reviewed-on: https://boringssl-review.googlesource.com/24464
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Reviewed-by: David Benjamin <davidben@google.com>
Mono's legacy TLS 1.0 stack, as a server, does not implement any form of
resumption, but blindly echos the ClientHello session ID in the
ServerHello for no particularly good reason.
This is invalid, but due to quirks of how our client checked session ID
equality, we only noticed on the second connection, rather than the
first. Flaky failures do no one any good, so break deterministically on
the first connection, when we realize something strange is going on.
Bug: chromium:796910
Change-Id: I1f255e915fcdffeafb80be481f6c0acb3c628846
Reviewed-on: https://boringssl-review.googlesource.com/25424
Commit-Queue: Steven Valdez <svaldez@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Reviewed-by: Steven Valdez <svaldez@google.com>
Running can spawn gdb in an xterm, but the default xterm is rather
small. We could have everyone set their .Xdefaults, I presume, to solve
this, but very few people are running the old xterm these days.
Change-Id: I46eb3ff22f292eb44ce8c5124e83f1ab8aef9547
Reviewed-on: https://boringssl-review.googlesource.com/24846
Reviewed-by: Adam Langley <agl@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Update-Note: Token Binding can no longer be configured with the custom
extensions API. Instead, use the new built-in implementation. (The
internal repository should be all set.)
Bug: 183
Change-Id: I007523a638dc99582ebd1d177c38619fa7e1ac38
Reviewed-on: https://boringssl-review.googlesource.com/20645
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Reviewed-by: David Benjamin <davidben@google.com>
This extension will be used to measure the latency impact of potentially
sending a post-quantum key share by default. At this time it's purely
measuring the impact of the client sending the key share, not the server
replying with a ciphertext.
We could use the existing padding extension for this but that extension
doesn't allow the server to echo it, so we would need a different
extension in the future anyway. Thus we just create one now.
We can assume that modern clients will be using TLS 1.3 by the time that
PQ key-exchange is established and thus the key share will be sent in
all ClientHello messages. However, since TLS 1.3 isn't quite here yet,
this extension is also sent for TLS 1.0–1.2 ClientHellos. The latency
impact should be the same either way.
Change-Id: Ie4a17551f6589b28505797e8c54cddbe3338dfe5
Reviewed-on: https://boringssl-review.googlesource.com/24585
Commit-Queue: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Reviewed-by: David Benjamin <davidben@google.com>
TLS 1.3 includes a server-random-based anti-downgrade signal, as a
workaround for TLS 1.2's ServerKeyExchange signature failing to cover
the entire handshake. However, because TLS 1.3 draft versions are each
doomed to die, we cannot deploy it until the final RFC. (Suppose a
draft-TLS-1.3 client checked the signal and spoke to a final-TLS-1.3
server. The server would correctly negotiate TLS 1.2 and send the
signal. But the client would then break. An anologous situation exists
with reversed roles.)
However, it appears that Cisco devices have non-compliant TLS 1.2
implementations[1] and copy over another server's server-random when
acting as a TLS terminator (client and server back-to-back).
Hopefully they are the only ones doing this. Implement a
measurement-only version with a different value. This sentinel must not
be enforced, but it will tell us whether enforcing it will cause
problems.
[1] https://www.ietf.org/mail-archive/web/tls/current/msg25168.html
Bug: 226
Change-Id: I976880bdb2ef26f51592b2f6b3b97664342679c8
Reviewed-on: https://boringssl-review.googlesource.com/24284
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
Upgrade-Note: SSL_CTX_set_tls13_variant(tls13_experiment) on the server
should switch to SSL_CTX_set_tls13_variant(tls13_experiment2).
(Configuring any TLS 1.3 variants on the server enables all variants,
so this is a no-op. We're just retiring some old experiments.)
Change-Id: I60f0ca3f96ff84bdf59e1a282a46e51d99047462
Reviewed-on: https://boringssl-review.googlesource.com/23784
Commit-Queue: Steven Valdez <svaldez@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Reviewed-by: David Benjamin <davidben@google.com>
QUIC will need to derive keys at this point. This also smooths over a
part of the server 0-RTT abstraction. Like with False Start, the SSL
object is largely in a functional state at this point.
Bug: 221
Change-Id: I4207d8cb1273a1156e728a7bff3943cc2c69e288
Reviewed-on: https://boringssl-review.googlesource.com/24224
Commit-Queue: Steven Valdez <svaldez@google.com>
Reviewed-by: Steven Valdez <svaldez@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Change-Id: Ic79f189c0bb2abf5d87f59ee410cafb4fb116ab8
Reviewed-on: https://boringssl-review.googlesource.com/24004
Commit-Queue: David Benjamin <davidben@google.com>
Reviewed-by: Steven Valdez <svaldez@google.com>
It's misnamed but, more importantly, doesn't do anything because the
test client isn't sending early data to begin with. We really need to
make these tests less error-prone to write. With this fix, the test
actually notices if we remove the server-side 0-RTT check.
Also remove MaxEarlyDataSize from the other server tests which
erroneously set it. Any test with sets that was likely copy-and-pasted
incorrectly.
Change-Id: Idc24bc1590e0316946022341185285418ab8c77b
Reviewed-on: https://boringssl-review.googlesource.com/23944
Commit-Queue: Steven Valdez <svaldez@google.com>
Reviewed-by: Steven Valdez <svaldez@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
We can probably do this globally at this point since the cipher
requirements are much more restrict than they were in the beginning.
(Firefox, in particular, has done so far a while.) For now add a flag
since some consumer wanted this.
I'll see about connecting it to a Chrome field trial after our breakage
budget is no longer reserved for TLS 1.3.
Change-Id: Ib61dd5aae2dfd48b56e79873a7f3061a7631a5f8
Reviewed-on: https://boringssl-review.googlesource.com/23725
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Change-Id: I87edf7e1fee07da4bc93cc7ab524b79991a4206e
Reviewed-on: https://boringssl-review.googlesource.com/23724
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Change-Id: Ic99a949258e62cad168c2c39507ca63100a8ffe5
Reviewed-on: https://boringssl-review.googlesource.com/23264
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This throws me off every time.
Change-Id: I19848927fe821f7656dea0343361d70dae4007c9
Reviewed-on: https://boringssl-review.googlesource.com/23445
Commit-Queue: Steven Valdez <svaldez@google.com>
Reviewed-by: Steven Valdez <svaldez@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
After much procrastinating, we finally moved Chromium to the new stuff.
We can now delete this. This is a breaking change for
SSL_PRIVATE_KEY_METHOD consumers, but it should be trivial (remove some
unused fields in the struct). I've bumped BORINGSSL_API_VERSION to ease
any multi-sided changes that may be needed.
Change-Id: I9fe562590ad938bcb4fcf9af0fadeff1d48745fb
Reviewed-on: https://boringssl-review.googlesource.com/23224
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Reviewed-by: Steven Valdez <svaldez@google.com>
Change-Id: I82f92019dccfaf927f7180a5af53c9ffae111861
Reviewed-on: https://boringssl-review.googlesource.com/23145
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
We were only running a random subset of TLS 1.3 tests with variants and
let a lot of bugs through as a result.
- HelloRetryRequest-EmptyCookie wasn't actually testing what we were
trying to test.
- The second HelloRetryRequest detection needs tweaks in draft-22.
- The empty HelloRetryRequest logic can't be based on non-empty
extensions in draft-22.
- We weren't sending ChangeCipherSpec correctly in HRR or testing it
right.
- Rework how runner reads ChangeCipherSpec by setting a flag which
affects the next readRecord. This cuts down a lot of cases and works
correctly if the client didn't send early data. (In that case, we
don't flush CCS until EndOfEarlyData and runner deadlocks waiting for
the ChangeCipherSpec to arrive.)
Change-Id: I559c96ea3a8b350067e391941231713c6edb2f78
Reviewed-on: https://boringssl-review.googlesource.com/23125
Reviewed-by: Steven Valdez <svaldez@chromium.org>
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Change-Id: I9da9734625d1d9d2c783830d8b4aecd34f51acc6
Reviewed-on: https://boringssl-review.googlesource.com/23124
Reviewed-by: Steven Valdez <svaldez@chromium.org>
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
The current PR says the sender only skips it during the handshake. Add a
test that we got this right.
Change-Id: Ib27eb942f11d955b8a24e32321efe474037f5254
Reviewed-on: https://boringssl-review.googlesource.com/23024
Reviewed-by: David Benjamin <davidben@google.com>
Reviewed-by: Steven Valdez <svaldez@chromium.org>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
See https://github.com/tlswg/tls13-spec/pull/1083. We misread the
original text spec, but it turns out the original spec text required
senders have version-specific maximum send fragments. The PR fixes this
off-by-one issue. Align with the new spec text uniformly.
This is a wire format change for our existing drafts *only if* records
have padding. We don't currently send padding, so this is fine. Unpadded
records continue to be capped at 2^14 bytes of plaintext (or 2^14+1
bytes of TLSInnerPlaintext structure).
Change-Id: I01017cfd13162504bb163dd59afd74aff0896cc4
Reviewed-on: https://boringssl-review.googlesource.com/23004
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Change-Id: I1a0f264cbfa0eb5d4adac96d0fc24fa342f2b6a3
Reviewed-on: https://boringssl-review.googlesource.com/22946
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This introduces a wire change to Experiment2/Experiment3 over 0RTT, however
as there is never going to be a 0RTT deployment with Experiment2/Experiment3,
this is valid.
Change-Id: Id541d195cbc4bbb3df7680ae2a02b53bb8ae3eab
Reviewed-on: https://boringssl-review.googlesource.com/22744
Commit-Queue: David Benjamin <davidben@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Reviewed-by: Steven Valdez <svaldez@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Change-Id: I46686aea9b68105cfe70a11db0e88052781e179c
Reviewed-on: https://boringssl-review.googlesource.com/22164
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Reviewed-by: David Benjamin <davidben@google.com>
Reviewed-by: Steven Valdez <svaldez@google.com>
RC4 is dead and gone. This trims away the suiteNoDTLS flag.
Change-Id: I1ddc5d0811ad8cfb073e6e3c73100240bc649615
Reviewed-on: https://boringssl-review.googlesource.com/22469
Commit-Queue: Steven Valdez <svaldez@google.com>
Reviewed-by: Steven Valdez <svaldez@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
RC4 is gone. The only remaining exception was the dumb SSL_eNULL cipher,
which works fine in DTLS. It doesn't seem worth the trouble to retain
this special-case.
Change-Id: I31023b71192808e4d21e82109255dc4d6d381df8
Reviewed-on: https://boringssl-review.googlesource.com/22467
Commit-Queue: Steven Valdez <svaldez@google.com>
Reviewed-by: Steven Valdez <svaldez@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This reverts commit 75d43b5785. Chatting
with EKR, there is some reason to believe that doing this might cause
more middlebox issues. Since we're still in the middle of working
towards viable deployment in the first place, revert this.
We can experiment with this later. I should have arranged for this to be
controlled more carefully anyway.
Change-Id: I0c8bf578f9d7364e913894e1bf3c2b8123dfd770
Reviewed-on: https://boringssl-review.googlesource.com/22204
Reviewed-by: Steven Valdez <svaldez@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This doesn't matter in so far as runner is not a real TLS
implementation, but it should enforce what there is to enforce just to
keep BoringSSL honest.
Bug: 80
Change-Id: I68940c33712d34a2437dc4dee31342e7f0f57c23
Reviewed-on: https://boringssl-review.googlesource.com/22069
Reviewed-by: Steven Valdez <svaldez@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This does not affect TLS 1.2 (beyond Channel ID or NPN) but, in TLS 1.3,
we send several encrypted handshake messages in a row. For the server,
this means 66 wasted bytes in TLS 1.3. Since OpenSSL has otherwise used
one record per message since the beginning and unencrypted overhead is
less interesting, leave that behavior as-is for the time being. (This
isn't the most pressing use of the breakage budget.) But TLS 1.3 is new,
so get this tight from the start.
Change-Id: I64dbd590a62469d296e1f10673c14bcd0c62919a
Reviewed-on: https://boringssl-review.googlesource.com/22068
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Reviewed-by: Steven Valdez <svaldez@google.com>
We enforce that servers don't send bogus ALPN values, so consumers may
assume that SSL_get0_alpn_selected won't have anything terribly weird.
To maintain that invariant in the face of folks whose ALPN preferences
change (consider a persisted session cache), we should decline to offer
0-RTT if early_alpn would have been rejected by the check anyway.
Change-Id: Ic3a9ba4041d5d4618742eb05e27033525d96ade1
Reviewed-on: https://boringssl-review.googlesource.com/22067
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Reviewed-by: Steven Valdez <svaldez@google.com>
Now that we've gotten everything, test this by just making bssl_shim run
all errors twice. The manual tests added to ssl_test.cc may now be
removed.
Bug: 206
Change-Id: Iefa0eae83ba59b476e6b6c6f0f921d5d1b72cbfb
Reviewed-on: https://boringssl-review.googlesource.com/21886
Commit-Queue: Steven Valdez <svaldez@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Reviewed-by: Steven Valdez <svaldez@google.com>
