SSL3_ENC_METHOD will remain version-specific while SSL_METHOD will become
protocol-specific. This finally removes all the version-specific portions of
SSL_METHOD but the version tag itself.
(SSL3_ENC_METHOD's version-specific bits themselves can probably be handled by
tracking a canonicalized protocol version. It would simplify version
comparisons anyway. The one catch is SSLv3 has a very different table. But
that's a cleanup for future. Then again, perhaps a version-specific method
table swap somewhere will be useful later for TLS 1.3.)
Much of this commit was generated with sed invocation:
s/method->ssl3_enc/enc_method/g
Change-Id: I2b192507876aadd4f9310240687e562e56e6c0b1
Reviewed-on: https://boringssl-review.googlesource.com/2581
Reviewed-by: Adam Langley <agl@google.com>
Now SSLv23 and DTLS_ANY_VERSION share version-related helper functions.
ssl3_get_method is temporary until the method switch is no longer necessary.
Put them all together so there's one place to refactor them when we add a new
version or implement min_version/max_version controls.
Change-Id: Ic28a145cad22db08a87fdb854480b22886c451c6
Reviewed-on: https://boringssl-review.googlesource.com/2580
Reviewed-by: Adam Langley <agl@google.com>
These may as well be replaced with assertions. Get them out of the way of the
initialization.
Change-Id: Ie4ab8bdc018e4a1def7d3f6b3b172a77896bfc0a
Reviewed-on: https://boringssl-review.googlesource.com/2563
Reviewed-by: Adam Langley <agl@google.com>
They're always known now. Also fix the SSLv23_{client,server}_method
definitions still had their own macro invocations.
Change-Id: Ia13f29a27f2331d25a4051e83f2d5abc62fab981
Reviewed-on: https://boringssl-review.googlesource.com/2562
Reviewed-by: Adam Langley <agl@google.com>
It just inserts extra flushes everywhere and isn't used.
Change-Id: I082e4bada405611f4986ba852dd5575265854036
Reviewed-on: https://boringssl-review.googlesource.com/2456
Reviewed-by: Adam Langley <agl@google.com>
Replace the comment with a clearer one and reimplement it much more tidily. The
mask thing was more complicated than was needed.
This slightly changes behavior on the DTLS_ANY_VERSION side in that, if only
one method is enabled, we no longer short-circuit to the version-locked method
early. This "optimization" seems unnecessary.
Change-Id: I571c8b60ed16bd4357c67d65df0dd1ef9cc5eb57
Reviewed-on: https://boringssl-review.googlesource.com/2451
Reviewed-by: Adam Langley <agl@google.com>
It should be set correctly prior to entering the handshake. Don't mask bugs by
assigning it.
Change-Id: Ib9bca8fad68916b3b242aad8819e3760e59e777a
Reviewed-on: https://boringssl-review.googlesource.com/2443
Reviewed-by: Adam Langley <agl@google.com>
Supporting both schemes seems pointless. Now that s->server and s->state are
set appropriately late and get_ssl_method is gone, the only difference is that
the client/server ones have non-functional ssl_accept or ssl_connect hooks. We
can't lose the generic ones, so let's unify on that.
Note: this means a static linker will no longer drop the client or server
handshake code if unused by a consumer linking statically. However, Chromium
needs the server half anyway for DTLS and WebRTC, so that's probably a lost
cause. Android also exposes server APIs.
Change-Id: I290f5fb4ed558f59fadb5d1f84e9d9c405004c23
Reviewed-on: https://boringssl-review.googlesource.com/2440
Reviewed-by: Adam Langley <agl@google.com>
If the state is SSL_ST_BEFORE, the SSL* was just initialized. Otherwise, we
don't want to call SSL_clear. The one case I found where we do is if a
handshake message is received and someone sets
SSL3_FLAGS_NO_RENEGOTIATE_CIPHERS. This is apparently intended for external
consumers to set, but I see no code in Google that does.
Which is fortunate because it'll trigger SSL_clear. This retains the BIOs but
drops all connection state, including the record. If the client just initiated
renego, that's the ClientHello that's lost. The connection then hangs: the now
reset SSL* wants a ClientHello (under the null cipher because that too's been
dropped) while the peer wants an encrypted ServerHello.
Change-Id: Iddb3e0bb86d39d98155b060f9273a0856f2d1409
Reviewed-on: https://boringssl-review.googlesource.com/2436
Reviewed-by: Adam Langley <agl@google.com>
SSL_ST_BEFORE is never standalone. As of upstream's
413c4f45ed0508d2242638696b7665f499d68265, SSL_ST_BEFORE is only ever set paired
with SSL_ST_ACCEPT or SSL_ST_CONNECT.
Conversely, SSL_ST_OK is never paired with SSL_ST_ACCEPT or SSL_ST_CONNECT. As
far as I can tell, this combination has never been possible.
Change-Id: Ifbc8f147be821026cf59f3d5038f0dbad3b0a1d2
Reviewed-on: https://boringssl-review.googlesource.com/2433
Reviewed-by: Adam Langley <agl@google.com>
When not offering to resume a session, the client populates s->session with a
fresh SSL_SESSION before the ServerHello is processed and, in DTLS_ANY_VERSION,
before the version is even determined. Don't create a fresh SSL_SESSION until
we know we are doing a full handshake.
This brings ssl3_send_client_hello closer to ssl23_client_hello in behavior. It
also fixes ssl_version in the client in DTLS_ANY_VERSION.
SSLv23_client_method is largely unchanged. If no session is offered, s->session
continues to be NULL until the ServerHello is received. The one difference is
that s->session isn't populated until the entire ServerHello is received,
rather than just the first half, in the case of a fragmented ServerHello. Apart
from info_callback, no external hooks get called between those points, so this
shouldn't expose new missing NULL checks.
The other client methods change significantly to match SSLv23_client_method's
behavior. For TLS, any exposed missing NULL checks are also in
SSLv23_client_method (and version-specific methods are already weird), so that
should be safe. For DTLS, I've verified that accesses in d1_*.c either handle
NULL or are after the ServerHello.
Change-Id: Idcae6bd242480e28a57dbba76ce67f1ac1ae1d1d
Reviewed-on: https://boringssl-review.googlesource.com/2404
Reviewed-by: Adam Langley <agl@google.com>
This is a bit of cleanup that probably should have been done at the same time
as 30ddb434bf.
For now, version negotiation is implemented with a method swap. It also
performs this swap on SSL_set_session, but this was neutered in
30ddb434bf. Rather than hackishly neuter it,
remove it outright. In addition, remove SSL_set_ssl_method. Now all method
swaps are internal: SSLv23_method switch to a version-specific method and
SSL_clear undoing it.
Note that this does change behavior: if an SSL* is created with one
version-specific method and we SSL_set_session to a session from a /different/
version, we would switch to the /other/ version-specific method. This is
extremely confusing, so it's unlikely anyone was actually expecting it.
Version-specific methods in general don't work well.
Change-Id: I72a5c1f321ca9aeb1b52ebe0317072950ba25092
Reviewed-on: https://boringssl-review.googlesource.com/2390
Reviewed-by: Adam Langley <agl@google.com>
This is only used for EAP-FAST which we apparently don't need to support.
Remove it outright. We broke it in 9eaeef81fa by
failing to account for session misses.
If this changes and we need it later, we can resurrect it. Preferably
implemented differently: the current implementation is bolted badly onto the
handshake. Ideally use the supplied callbacks to fabricate an appropriate
SSL_SESSION and resume that with as much of the normal session ticket flow as
possible.
The one difference is that EAP-FAST seems to require the probing mechanism for
session tickets rather than the sane session ID echoing version. We can
reimplement that by asking the record layer to probe ahead for one byte.
Change-Id: I38304953cc36b2020611556a91e8ac091691edac
Reviewed-on: https://boringssl-review.googlesource.com/2360
Reviewed-by: Adam Langley <agl@google.com>
This commit fixes a number of crashes caused by malloc failures. They
were found using the -malloc-test=0 option to runner.go which runs tests
many times, causing a different allocation call to fail in each case.
(This test only works on Linux and only looks for crashes caused by
allocation failures, not memory leaks or other errors.)
This is not the complete set of crashes! More can be found by collecting
core dumps from running with -malloc-test=0.
Change-Id: Ia61d19f51e373bccb7bc604642c51e043a74bd83
Reviewed-on: https://boringssl-review.googlesource.com/2320
Reviewed-by: Adam Langley <agl@google.com>
This fixes version mismatches on resumption without rewriting the entirety of
OpenSSL's version negotiation logic. (Which still badly needs to happen.)
BUG=chromium:417134
Change-Id: Ifa0c5dd2145e37fcd39eec25dfb3561ddb87c9f0
Reviewed-on: https://boringssl-review.googlesource.com/1823
Reviewed-by: Adam Langley <agl@google.com>
Get all this stuff out of the way.
- OPENSSL_NO_MD5
- OPENSSL_NO_SHA
- OPENSSL_NO_EC
- OPENSSL_NO_ECDSA
- OPENSSL_NO_ECDH
- OPENSSL_NO_NEXTPROTONEG
- OPENSSL_NO_DH
- OPENSSL_NO_SSL3
- OPENSSL_NO_RC4
- OPENSSL_NO_RSA
Also manually removed a couple instances of OPENSSL_NO_DSA that seemed to be
confused anyway. Did some minor manual cleanup. (Removed a few now-pointless
'if (0)'s.)
Change-Id: Id540ba97ee22ff2309ab20ceb24c7eabe766d4c4
Reviewed-on: https://boringssl-review.googlesource.com/1662
Reviewed-by: Adam Langley <agl@google.com>
It was added in OpenSSL 1.0.2, so nothing can be depending on it yet. If we
really want a Suite B profile, it seems better to generate a configuration for
the rest of the system rather than pepper the codebase with checks.
Change-Id: I1be3ebed0e87cbfe236ade4174dcf5bbc7e10dd5
Reviewed-on: https://boringssl-review.googlesource.com/1517
Reviewed-by: Adam Langley <agl@google.com>
It's not built. The problem is worked around by the padding extension now.
Change-Id: If577efdae57d1bca4e0a626486fc0502c3567ebb
Reviewed-on: https://boringssl-review.googlesource.com/1374
Reviewed-by: Adam Langley <agl@google.com>
Without SSLv2, all cipher suite values are 2 bytes. Represent them as a
uint16_t and make all functions pass those around rather than pointers.
This removes SSL_CIPHER_find as it's unused.
Change-Id: Iea0b75abee4352a8333a4b8e39a161430ae55ea6
Reviewed-on: https://boringssl-review.googlesource.com/1259
Reviewed-by: Adam Langley <agl@google.com>
Accepting them as a server is still necessary, but this code is unreachable.
Without SSLv2 support, none of the cipher suites are SSLv2, so
ssl23_no_ssl2_ciphers always returns true and we send a V3ClientHello.
Change-Id: I09030f2c6e375660453c74e4f094d95e9908c3e1
Reviewed-on: https://boringssl-review.googlesource.com/1258
Reviewed-by: Adam Langley <agl@google.com>
Done with unifdef with some manual edits to remove empty lines.
Change-Id: I40d163539cab8ef0e01e45b7dc6a1a0a37733c3e
Reviewed-on: https://boringssl-review.googlesource.com/1097
Reviewed-by: Adam Langley <agl@google.com>
Found no users of the functions which control the feature. (Also I don't
particularly want to port all of that to CBS...)
Change-Id: I55da42c44d57252bd47bdcb30431be5e6e90dc56
Reviewed-on: https://boringssl-review.googlesource.com/1061
Reviewed-by: Adam Langley <agl@google.com>
This code doesn't even get built unless you go out of your way to pass an
extension value at build time.
Change-Id: I92ffcdfb18505c96e5ef390c8954a54cee19967f
Reviewed-on: https://boringssl-review.googlesource.com/1063
Reviewed-by: Adam Langley <agl@google.com>
If we need an extension, we can implement it in-library.
Change-Id: I0eac5affcd8e7252b998b6c86ed2068234134b08
Reviewed-on: https://boringssl-review.googlesource.com/1051
Reviewed-by: Adam Langley <agl@google.com>
Fix limit checks in ssl_add_clienthello_tlsext and
ssl_add_serverhello_tlsext.
Some of the limit checks reference p rather than ret. p is the original
buffer position, not the current one. Fix those and rename p to orig so
it's clearer.
Initial fork from f2d678e6e89b6508147086610e985d4e8416e867 (1.0.2 beta).
(This change contains substantial changes from the original and
effectively starts a new history.)
