Set ctx->error = X509_V_ERR_OUT_OF_MEM when verification cannot
continue due to malloc failure. Similarly for issuer lookup failures
and caller errors (bad parameters or invalid state).
Also, when X509_verify_cert() returns <= 0 make sure that the
verification status does not remain X509_V_OK, as a last resort set
it it to X509_V_ERR_UNSPECIFIED, just in case some code path returns
an error without setting an appropriate value of ctx->error.
Add new and some missing error codes to X509 error -> SSL alert switch.
(Imported from upstream's 5553a12735e11bc9aa28727afe721e7236788aab.)
Change-Id: I3231a6b2e72a3914cb9316b8e90ebaee009a1c5f
Reviewed-on: https://boringssl-review.googlesource.com/8170
Reviewed-by: David Benjamin <davidben@google.com>
Change-Id: I0aaf9d926a81c3a10e70ae3ae6605d4643419f89
Reviewed-on: https://boringssl-review.googlesource.com/8210
Reviewed-by: Taylor Brandstetter <deadbeef@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
This callback is used by BoringSSL tests in order to simulate the time,
so that the tests have repeatable results. This API will allow consumers
of BoringSSL to write the same sort of tests.
Change-Id: I79d72bce5510bbd83c307915cd2cc937579ce948
Reviewed-on: https://boringssl-review.googlesource.com/8200
Reviewed-by: David Benjamin <davidben@google.com>
It's useful, when combined with patching crypto/rand/deterministic.c in, for
debugging things. Also if we want to record fuzzer transcripts again, this
probably should be on.
Change-Id: I109cf27ebab64f01a13466f0d960def3257d8750
Reviewed-on: https://boringssl-review.googlesource.com/8192
Reviewed-by: David Benjamin <davidben@google.com>
Depending on bittedness of the runner, uint16 * uint16 can overflow an int.
There's other computations that can overflow a uint32 as well, so I just made
everything uint64 to avoid thinking about it too much.
Change-Id: Ia3c976987f39f78285c865a2d7688600d73c2514
Reviewed-on: https://boringssl-review.googlesource.com/8193
Reviewed-by: Adam Langley <agl@google.com>
The separation is purely historical (what happened to use an SSL_ctrl hook), so
put them all in one place. Make a vague attempt to match the order of the
header file, though we're still very far from matching.
Change-Id: Iba003ff4a06684a6be342e438d34bc92cab1cd14
Reviewed-on: https://boringssl-review.googlesource.com/8189
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
-timeout collides with go test's flags.
Change-Id: Icfc954915a61f1bb4d0acc8f02ec8a482ea10158
Reviewed-on: https://boringssl-review.googlesource.com/8188
Reviewed-by: David Benjamin <davidben@google.com>
Match the actual name of the type.
Change-Id: I0ad27196ee2876ce0690d13068fa95f68b05b0da
Reviewed-on: https://boringssl-review.googlesource.com/8187
Reviewed-by: David Benjamin <davidben@google.com>
Give them much more reasonable names.
Change-Id: Id14d983ab3231da21a4f987e662c2e01af7a2cd6
Reviewed-on: https://boringssl-review.googlesource.com/8185
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Reorder states and functions by where they appear in the handshake. Remove
unnecessary hooks on SSL_PROTOCOL_METHOD.
Change-Id: I78dae9cf70792170abed6f38510ce870707e82ff
Reviewed-on: https://boringssl-review.googlesource.com/8184
Reviewed-by: David Benjamin <davidben@google.com>
Rather than reset the timer on every message, start it up immediately after
flushing one of our flights.
Change-Id: I97f8b4f572ceff62c546c94933b2700975c50a02
Reviewed-on: https://boringssl-review.googlesource.com/8180
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
It's unreachable and wouldn't work anyway. We'd never bubble up to the caller
to retry. As a consequence, the TLS side doesn't actually need to pay attention
to init_off.
(For now anyway. We'll probably need state of this sort once the write half is
all reworked. All the craziness with wpend_buf ought to be limited to the
SSL_write bits.)
Change-Id: I951534f6bbeb547ce0492d5647aaf76be42108a3
Reviewed-on: https://boringssl-review.googlesource.com/8179
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
It can be folded into dtls1_read_app_data. This code, since it still takes an
output pointer, does not yet process records atomically. (Though, being DTLS,
it probably should...)
Change-Id: I57d60785c9c1dd13b5b2ed158a08a8f5a518db4f
Reviewed-on: https://boringssl-review.googlesource.com/8177
Reviewed-by: David Benjamin <davidben@google.com>
This was probably the worst offender of them all as read_bytes is the wrong
abstraction to begin with. Note this is a slight change in how processing a
record works. Rather than reading one fragment at a time, we process all
fragments in a record and return. The intent here is so that all records are
processed atomically since the connection eventually will not be able to retain
a buffer holding the record.
This loses a ton of (though not quite all yet) those a2b macros.
Change-Id: Ibe4bbcc33c496328de08d272457d2282c411b38b
Reviewed-on: https://boringssl-review.googlesource.com/8176
Reviewed-by: David Benjamin <davidben@google.com>
read_close_notify is a very straight-forward hook and doesn't need much.
Change-Id: I7407d842321ea1bcb47838424a0d8f7550ad71ca
Reviewed-on: https://boringssl-review.googlesource.com/8174
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
The business with ssl_record_prefix_len is rather a hassle. Instead, have
tls_open_record always decrypt in-place and give back a CBS to where the body
is.
This way the caller doesn't need to do an extra check all to avoid creating an
invalid pointer and underflow in subtraction.
Change-Id: I4e12b25a760870d8f8a503673ab00a2d774fc9ee
Reviewed-on: https://boringssl-review.googlesource.com/8173
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Alert handling is more-or-less identical across all contexts. Push it down from
read_bytes into the low-level record functions. This also deduplicates the code
shared between TLS and DTLS.
Now the only type mismatch managed by read_bytes is if we get handshake data in
read_app_data.
Change-Id: Ia8331897b304566e66d901899cfbf31d2870194e
Reviewed-on: https://boringssl-review.googlesource.com/8124
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
This is getting a little repetitive.
Change-Id: Ib0fa8ab10149557c2d728b88648381b9368221d9
Reviewed-on: https://boringssl-review.googlesource.com/8126
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: Adam Langley <agl@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Move this logic out of dtls1_read_bytes and into dtls1_get_record. Only trigger
it when reading from the buffer fails. The other one shouldn't be necessary.
This exists to handle the blocking BIO case when the
BIO_CTRL_DGRAM_SET_NEXT_TIMEOUT signal triggers, so we only need to do it when
timeouts actually trigger.
There also doesn't seem to be a need for most of the machinery. The
BIO_set_flags call seems to be working around a deficiency in the underlying
BIO. There also shouldn't be a need to check the handshake state as there
wouldn't be a timer to restart otherwise.
Change-Id: Ic901ccfb5b82aeb409d16a9d32c04741410ad6d7
Reviewed-on: https://boringssl-review.googlesource.com/8122
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: Adam Langley <agl@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
The two modes are quite different. One of them requires the BIO honor an
extra BIO_ctrl. Also add an explanation at the top of
addDTLSRetransmitTests for how these tests work. The description is
scattered across many different places.
BUG=63
Change-Id: Iff4cdd1fbf4f4439ae0c293f565eb6780c7c84f9
Reviewed-on: https://boringssl-review.googlesource.com/8121
Reviewed-by: David Benjamin <davidben@google.com>
We've got it in entry points. That should be sufficient. (Do we even need it
there?)
Change-Id: I39b245a08fcde7b57e61b0bfc595c6ff4ce2a07a
Reviewed-on: https://boringssl-review.googlesource.com/8127
Reviewed-by: David Benjamin <davidben@google.com>
This cannot happen.
Change-Id: Ib1b473aa91d6479eeff43f7eaf94906d0b2c2a8f
Reviewed-on: https://boringssl-review.googlesource.com/8123
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
ssl->cert is never NULL. It gets created in SSL_new unconditionally.
Change-Id: I5c54c9c73e281e61a554820d61421226d763d33a
Reviewed-on: https://boringssl-review.googlesource.com/8125
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
In TLS 1.3, the actual record type is hidden within the encrypted data
and the record layer defaults to using a TLS 1.0 {3, 1} record version
for compatibility. Additionally the record layer no longer checks the
minor version of the record layer to maintain compatibility with the
TLS 1.3 spec.
Change-Id: If2c08e48baab170c1658e0715c33929d36c9be3a
Reviewed-on: https://boringssl-review.googlesource.com/8091
Reviewed-by: David Benjamin <davidben@google.com>
OpenSSL was actually super-buggy here (though known bugs on our end have been
fixed), but pyOpenSSL was confused and incorrectly documented that callers call
SSL_read after SSL_shutdown to do bidi shutdown, so we should probably support
this. Add a test that it works.
Change-Id: I2b6d012161330aeb4cf894bae3a0b6a55d53c70d
Reviewed-on: https://boringssl-review.googlesource.com/8093
Reviewed-by: Adam Langley <agl@google.com>
This keeps the naming convention in line with the actual spec.
Change-Id: I34673f78dbc29c1659b4da0e49677ebe9b79636b
Reviewed-on: https://boringssl-review.googlesource.com/8090
Reviewed-by: David Benjamin <davidben@google.com>
Windows SRWLOCK requires you call different functions here. Split
them up in preparation for switching Windows from CRITICAL_SECTION.
BUG=37
Change-Id: I7b5c6a98eab9ae5bb0734b805cfa1ff334918f35
Reviewed-on: https://boringssl-review.googlesource.com/8080
Reviewed-by: Adam Langley <agl@google.com>
This is easier to deploy, and more obvious. This commit reverts a few
pieces of e25775bc, but keeps most of it.
Change-Id: If8d657a4221c665349c06041bb12fffca1527a2c
Reviewed-on: https://boringssl-review.googlesource.com/8061
Reviewed-by: Adam Langley <agl@google.com>
This reverts commit c7eae5a326. pyOpenSSL
expects to be able to call |SSL_read| after a shutdown and get EOF.
Change-Id: Icc5faa09d644ec29aac99b181dac0db197f283e3
Reviewed-on: https://boringssl-review.googlesource.com/8060
Reviewed-by: Adam Langley <agl@google.com>
The TLS 1.3 spec has an explicit nonce construction for AEADs that
requires xoring the IV and sequence number.
Change-Id: I77145e12f7946ffb35ebeeb9b2947aa51058cbe9
Reviewed-on: https://boringssl-review.googlesource.com/8042
Reviewed-by: Adam Langley <agl@google.com>
Constants representing TLS 1.3 are added to allow for future work to be
flagged on TLS1_3_VERSION. To prevent BoringSSL from negotiating the
non-existent TLS 1.3 version, it is explicitly disabled using
SSL_OP_NO_TLSv1_3.
Change-Id: Ie5258a916f4c19ef21646c4073d5b4a7974d6f3f
Reviewed-on: https://boringssl-review.googlesource.com/8041
Reviewed-by: Adam Langley <agl@google.com>
This renames the Channel ID EncryptedExtensions message to allow for
compatibility with TLS 1.3 EncryptedExtensions.
Change-Id: I5b67d00d548518045554becb1b7213fba86731f2
Reviewed-on: https://boringssl-review.googlesource.com/8040
Reviewed-by: Adam Langley <agl@google.com>
OpenSSL's bbio logic is kind of crazy. It would be good to eventually do the
buffering in a better way (notably, bbio is fragile, if not outright broken,
for DTLS). In the meantime, this fixes a number of bugs where the existence of
bbio was leaked in the public API and broke things.
- SSL_get_wbio returned the bbio during the handshake. It must always return
the BIO the consumer configured. In doing so, internal accesses of
SSL_get_wbio should be switched to ssl->wbio since those want to see bbio.
For consistency, do the same with rbio.
- The logic in SSL_set_rfd, etc. (which I doubt is quite right since
SSL_set_bio's lifetime is unclear) would get confused once wbio got wrapped.
Those want to compare to SSL_get_wbio.
- If SSL_set_bio was called mid-handshake, bbio would get disconnected and lose
state. It forgets to reattach the bbio afterwards. Unfortunately, Conscrypt
does this a lot. It just never ended up calling it at a point where the bbio
would cause problems.
- Make more explicit the invariant that any bbio's which exist are always
attached. Simplify a few things as part of that.
Change-Id: Ia02d6bdfb9aeb1e3021a8f82dcbd0629f5c7fb8d
Reviewed-on: https://boringssl-review.googlesource.com/8023
Reviewed-by: Kenny Root <kroot@google.com>
Reviewed-by: Adam Langley <agl@google.com>
GetConfigPtr was a silly name. GetTestConfig matches the type and GetTestState.
Change-Id: I9998437a7be35dbdaab6e460954acf1b95375de0
Reviewed-on: https://boringssl-review.googlesource.com/8024
Reviewed-by: Adam Langley <agl@google.com>
The 'elliptic_curves' extension is being renamed to 'supported_groups'
in the TLS 1.3 draft, and most of the curve-specific methods are
generalized to groups/group IDs.
Change-Id: Icd1a1cf7365c8a4a64ae601993dc4273802610fb
Reviewed-on: https://boringssl-review.googlesource.com/7955
Reviewed-by: David Benjamin <davidben@google.com>
CECPQ1 is a new key exchange that concatenates the results of an X25519
key agreement and a NEWHOPE key agreement.
Change-Id: Ib919bdc2e1f30f28bf80c4c18f6558017ea386bb
Reviewed-on: https://boringssl-review.googlesource.com/7962
Reviewed-by: David Benjamin <davidben@google.com>
Those checks contradict an assert up in read_app_data. This is part of
shrinking read_bytes further into get_record and its callers until it goes
away. Here, this kind of policy should be controlled by the callers.
Change-Id: If8f9a45b8b95093beab1b3d4abcd31da55c65322
Reviewed-on: https://boringssl-review.googlesource.com/7954
Reviewed-by: Adam Langley <agl@google.com>
There is no good reason why this needs to be this way. Later work should make
this all use a much more appropriate design. In the meantime, leave a note here
so this does not look accidental.
Change-Id: I7599dea7a474f54e26d9ab175b0e3cada99a974d
Reviewed-on: https://boringssl-review.googlesource.com/7951
Reviewed-by: Adam Langley <agl@google.com>
This was needed because ssl3_get_message would get confused if init_num were
not set back to zero when reading the next message. However, ssl3_get_message
now treats init_num only as an output, not an input. (The message sending logic
and the individual handshake states still use it, so we can't get rid of it
altogether yet.)
I've kept the init_num reset at the start and end of the handshake loop alone
for now since that's more about initialization and cleanup. Though I believe
they too do not do anything.
Change-Id: I64bbdd82122498de32364e7edb3b00b166059ecd
Reviewed-on: https://boringssl-review.googlesource.com/7950
Reviewed-by: Adam Langley <agl@google.com>
They're completely unused now. The handshake message reassembly logic should
not depend on the state machine. This should partially free it up (ugly as it
is) to be shared with a future TLS 1.3 implementation while, in parallel, it
and the layers below, get reworked. This also cuts down on the number of states
significantly.
Partially because I expect we'd want to get ssl_hash_message_t out of there
too. Having it in common code is fine, but it needs to be in the (supposed to
be) protocol-agnostic handshake state machine, not the protocol-specific
handshake message layer.
Change-Id: I12f9dc57bf433ceead0591106ab165d352ef6ee4
Reviewed-on: https://boringssl-review.googlesource.com/7949
Reviewed-by: Adam Langley <agl@google.com>
Rather than this confusing coordination with the handshake state machine and
init_num changing meaning partway through, use the length field already in
BUF_MEM. Like the new record layer parsing, is no need to keep track of whether
we are reading the header or the body. Simply keep extending the handshake
message until it's far enough along.
ssl3_get_message still needs tons of work, but this allows us to disentangle it
from the handshake state.
Change-Id: Ic2b3e7cfe6152a7e28a04980317d3c7c396d9b08
Reviewed-on: https://boringssl-review.googlesource.com/7948
Reviewed-by: Adam Langley <agl@google.com>
