In order to delay the digest of the handshake transcript and unify
around message-based signing callbacks, a copy of the transcript is kept
around until we are sure there is no certificate authentication.
This removes support for SSL_PRIVATE_KEY_METHOD as a client in SSL 3.0.
Change-Id: If8999a19ca021b4ff439319ab91e2cd2103caa64
Reviewed-on: https://boringssl-review.googlesource.com/8561
Reviewed-by: David Benjamin <davidben@google.com>
This also adds a missing check to the C half to ensure fake record types are
always correct, to keep implementations honest.
Change-Id: I1d65272e647ffa67018c721d52c639f8ba47d647
Reviewed-on: https://boringssl-review.googlesource.com/8510
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Calling SSL_shutdown while in init previously gave a "1" response,
meaning everything was successfully closed down (even though it
wasn't). Better is to send our close_notify, but fail when trying to
receive one.
The problem with doing a shutdown while in the middle of a handshake
is that once our close_notify is sent we shouldn't really do anything
else (including process handshake/CCS messages) until we've received a
close_notify back from the peer. However the peer might send a CCS
before acting on our close_notify - so we won't be able to read it
because we're not acting on CCS messages!
(Imported from upstream's f73c737c7a)
Change-Id: Iaad5c5e38983456d3697c955522a89919628024b
Reviewed-on: https://boringssl-review.googlesource.com/7207
Reviewed-by: David Benjamin <davidben@google.com>
38 error codes have fallen off the list since the last time we did this.
Change-Id: Id7ee30889a5da2f6ab66957fd8e49e97640c8489
Reviewed-on: https://boringssl-review.googlesource.com/6643
Reviewed-by: Adam Langley <agl@google.com>
dh.c had a 10k-bit limit but it wasn't quite correctly enforced. However,
that's still 1.12s of jank on the IO thread, which is too long. Since the SSL
code consumes DHE groups from the network, it should be responsible for
enforcing what sanity it needs on them.
Costs of various bit lengths on 2013 Macbook Air:
1024 - 1.4ms
2048 - 14ms
3072 - 24ms
4096 - 55ms
5000 - 160ms
10000 - 1.12s
UMA says that DHE groups are 0.2% 4096-bit and otherwise are 5.5% 2048-bit and
94% 1024-bit and some noise. Set the limit to 4096-bit to be conservative,
although that's already quite a lot of jank.
BUG=554295
Change-Id: I8e167748a67e4e1adfb62d73dfff094abfa7d215
Reviewed-on: https://boringssl-review.googlesource.com/6464
Reviewed-by: Adam Langley <agl@google.com>
If the two extensions select different next protocols (quite possible since one
is server-selected and the other is client-selected), things will break. This
matches the behavior of NSS (Firefox) and Go.
Change-Id: Ie1da97bf062b91a370c85c12bc61423220a22f36
Reviewed-on: https://boringssl-review.googlesource.com/5780
Reviewed-by: Adam Langley <agl@google.com>
This change mirrors upstream's custom extension API because we have some
internal users that depend on it.
Change-Id: I408e442de0a55df7b05c872c953ff048cd406513
Reviewed-on: https://boringssl-review.googlesource.com/5471
Reviewed-by: Adam Langley <agl@google.com>
Fastradio was a trick where the ClientHello was padding to at least 1024
bytes in order to trick some mobile radios into entering high-power mode
immediately. After experimentation, the feature is being dropped.
This change also tidies up a bit of the extensions code now that
everything is using the new system.
Change-Id: Icf7892e0ac1fbe5d66a5d7b405ec455c6850a41c
Reviewed-on: https://boringssl-review.googlesource.com/5466
Reviewed-by: Adam Langley <agl@google.com>
Running make_errors.go every time a function is renamed is incredibly
tedious. Plus we keep getting them wrong.
Instead, sample __func__ (__FUNCTION__ in MSVC) in the OPENSSL_PUT_ERROR macro
and store it alongside file and line number. This doesn't change the format of
ERR_print_errors, however ERR_error_string_n now uses the placeholder
"OPENSSL_internal" rather than an actual function name since that only takes
the uint32_t packed error code as input.
This updates err scripts to not emit the function string table. The
OPENSSL_PUT_ERROR invocations, for now, still include the extra
parameter. That will be removed in a follow-up.
BUG=468039
Change-Id: Iaa2ef56991fb58892fa8a1283b3b8b995fbb308d
Reviewed-on: https://boringssl-review.googlesource.com/5275
Reviewed-by: Adam Langley <agl@google.com>
This change also switches the behaviour of the client. Previously the
client would send the SCSV rather than the extension, but now it'll only
do that for SSLv3 connections.
Change-Id: I67a04b8abbef2234747c0dac450458deb6b0cd0a
Reviewed-on: https://boringssl-review.googlesource.com/5143
Reviewed-by: Adam Langley <agl@google.com>
Rather than four massive functions that handle every extension,
organise the code by extension with four smaller functions for each.
Change-Id: I876b31dacb05aca9884ed3ae7c48462e6ffe3b49
Reviewed-on: https://boringssl-review.googlesource.com/5142
Reviewed-by: Adam Langley <agl@google.com>
Mirrors SSL_SESSION_to_bytes. It avoids having to deal with object-reuse, the
non-size_t length parameter, and trailing data. Both it and the object-reuse
variant back onto an unexposed SSL_SESSION_parse which reads a CBS.
Note that this changes the object reuse story slightly. It's now merely an
optional output pointer that frees its old contents. No d2i_SSL_SESSION
consumer in Google that's built does reuse, much less reuse with the assumption
that the top-level object won't be overridden.
Change-Id: I5cb8522f96909bb222cab0f342423f2dd7814282
Reviewed-on: https://boringssl-review.googlesource.com/5121
Reviewed-by: Adam Langley <agl@google.com>
The client and server both have to decide on behaviour when resuming a
session where the EMS state of the session doesn't match the EMS state
as exchanged in the handshake.
Original handshake
| No Yes
------+--------------------------------------------------------------
|
R | Server: ok [1] Server: abort [3]
e No | Client: ok [2] Client: abort [4]
s |
u |
m |
e |
Yes | Server: don't resume No problem
| Client: abort; server
| shouldn't have resumed
[1] Servers want to accept legacy clients. The draft[5] says that
resumptions SHOULD be rejected so that Triple-Handshake can't be done,
but we'll rather enforce that EMS was used when using tls-unique etc.
[2] The draft[5] says that even the initial handshake should be aborted
if the server doesn't support EMS, but we need to be able to talk to the
world.
[3] This is a very weird case where a client has regressed without
flushing the session cache. Hopefully we can be strict and reject these.
[4] This can happen when a server-farm shares a session cache but
frontends are not all updated at once. If Chrome is strict here then
hopefully we can prevent any servers from existing that will try to
resume an EMS session that they don't understand. OpenSSL appears to be
ok here: https://www.ietf.org/mail-archive/web/tls/current/msg16570.html
[5] https://tools.ietf.org/html/draft-ietf-tls-session-hash-05#section-5.2
BUG=492200
Change-Id: Ie1225a3960d49117b05eefa5a36263d8e556e467
Reviewed-on: https://boringssl-review.googlesource.com/4981
Reviewed-by: Adam Langley <agl@google.com>
The SSL_PROTOCOL_METHOD table needs work, but this makes it clearer
exactly what the shared interface between the upper later and TLS/DTLS
is.
BUG=468889
Change-Id: I38931c484aa4ab3f77964d708d38bfd349fac293
Reviewed-on: https://boringssl-review.googlesource.com/4955
Reviewed-by: Adam Langley <agl@google.com>
tls1_enc is now SSL_AEAD_CTX_{open,seal}. This starts tidying up a bit
of the record-layer logic. This removes rr->input, as encrypting and
decrypting records no longer refers to various globals. It also removes
wrec altogether. SSL3_RECORD is now only used to maintain state about
the current incoming record. Outgoing records go straight to the write
buffer.
This also removes the outgoing alignment memcpy and simply calls
SSL_AEAD_CTX_seal with the parameters as appropriate. From bssl speed
tests, this seems to be faster on non-ARM and a bit of a wash on ARM.
Later it may be worth recasting these open/seal functions to write into
a CBB (tweaked so it can be malloc-averse), but for now they take an
out/out_len/max_out trio like their EVP_AEAD counterparts.
BUG=468889
Change-Id: Ie9266a818cc053f695d35ef611fd74c5d4def6c3
Reviewed-on: https://boringssl-review.googlesource.com/4792
Reviewed-by: Adam Langley <agl@google.com>
The only place using it is export keying material which can do the
version check inline.
Change-Id: I1893966c130aa43fa97a6116d91bb8b04f80c6fb
Reviewed-on: https://boringssl-review.googlesource.com/4615
Reviewed-by: Adam Langley <agl@google.com>
It's only called for client certificates with NULL. The interaction with
extra_certs is more obvious if we handle that case externally. (We
shouldn't attach extra_certs if there is no leaf.)
Change-Id: I9dc26f32f582be8c48a4da9aae0ceee8741813dc
Reviewed-on: https://boringssl-review.googlesource.com/4613
Reviewed-by: Adam Langley <agl@google.com>
Document them while I'm here. This adds a new 'preprocessor
compatibility section' to avoid breaking #ifdefs. The CTRL values
themselves are defined to 'doesnt_exist' to catch anything calling
SSL_ctrl directly until that function can be unexported completely.
BUG=404754
Change-Id: Ia157490ea8efe0215d4079556a0c7643273e7601
Reviewed-on: https://boringssl-review.googlesource.com/4553
Reviewed-by: Adam Langley <agl@google.com>
After sharding the session cache for fallbacks, the numbers have been pretty
good; 0.03% on dev and 0.02% on canary. Stable is at 0.06% but does not have
the sharded session cache. Before sharding, stable, beta, and dev had been
fairly closely aligned. Between 0.03% being low and the fallback saving us in
all but extremely contrived cases, I think this should be fairly safe.
Add tests for both the cipher suite and protocol version mismatch checks.
BUG=441456
Change-Id: I2374bf64d0aee0119f293d207d45319c274d89ab
Reviewed-on: https://boringssl-review.googlesource.com/3972
Reviewed-by: Adam Langley <agl@google.com>
Also check for overflow, although it really shouldn't happen.
Change-Id: I34dfe8eaf635aeaa8bef2656fda3cd0bad7e1268
Reviewed-on: https://boringssl-review.googlesource.com/4235
Reviewed-by: Adam Langley <agl@google.com>
Separate actually writing the fragment to the network from assembling it so
there is no need for is_fragment. record_split_done also needn't be a global;
as of 7fdeaf11017b82368e0a97547fc491b90ad40f67, it is always reset to 0 whether
or not SSL3_WANT_WRITE occurred, despite the comment.
I believe this is sound, but the pre-7fdeaf1 logic wasn't quiiite right;
ssl3_write_pending allows a retry to supply *additional* data, so not all
plaintext had been commited to before the IV was randomized. We could fix this
by tracking how many bytes were committed to the last time we fragmented, but
this is purely an optimization and doesn't seem worth the complexity.
This also fixes the alignment computation in the record-splitting case. The
extra byte was wrong, as demonstrated by the assert.
Change-Id: Ia087a45a6622f4faad32e501942cc910eca1237b
Reviewed-on: https://boringssl-review.googlesource.com/4234
Reviewed-by: Adam Langley <agl@google.com>
Turn them into static functions that take in an hm_fragment. It's not
immediately obvious that the frag_off/frag_len bounds checks and the msg_len
consistency check are critical to avoiding an out-of-bounds write. Better to
have dtls1_hm_fragment_mark also check internally.
Also rework the bitmask logic to be clearer and avoid a table.
Change-Id: Ica54e98f66295efb323e033cb6c67ab21e7d6cbc
Reviewed-on: https://boringssl-review.googlesource.com/3765
Reviewed-by: Adam Langley <agl@google.com>
Notably, drop all special cases around receiving a message in order and
receiving a full message. It makes things more complicated and was the source
of bugs (the MixCompleteMessageWithFragments tests added in this CL did not
pass before). Instead, every message goes through an hm_fragment, and
dtls1_get_message always checks buffered_messages to see if the next is
complete.
The downside is that we pay one more copy of the message data in the common
case. This is only during connection setup, so I think it's worth the
simplicity. (If we want to optimize later, we could either tighten
ssl3_get_message's interface to allow the handshake data being in the
hm_fragment's backing store rather than s->init_buf or swap out s->init_buf
with the hm_fragment's backing store when a mesasge completes.
This CL does not address ssl_read_bytes being an inappropriate API for DTLS.
Future work will revise the handshake/transport boundary to align better with
DTLS's needs. Also other problems that I've left as TODOs.
Change-Id: Ib4570d45634b5181ecf192894d735e8699b1c86b
Reviewed-on: https://boringssl-review.googlesource.com/3764
Reviewed-by: Adam Langley <agl@google.com>
This saves about 6-7k of error data.
Change-Id: Ic28593d4a1f5454f00fb2399d281c351ee57fb14
Reviewed-on: https://boringssl-review.googlesource.com/3385
Reviewed-by: Adam Langley <agl@google.com>
Previously, error strings were kept in arrays for each subdirectory and
err.c would iterate over them all and insert them at init time to a hash
table.
This means that, even if you have a shared library and lots of processes
using that, each process has ~30KB of private memory from building that
hash table.
This this change, all the error strings are built into a sorted list and
are thus static data. This means that processes can share the error
information and it actually saves binary space because of all the
pointer overhead in the old scheme. Also it saves the time taken
building the hash table at startup.
This removes support for externally-supplied error string data.
Change-Id: Ifca04f335c673a048e1a3e76ff2b69c7264635be
Steven Valdez
David Benjamin
Steven Valdez
David Benjamin
Adam Langley
Adam Langley
Adam Langley