OpenSSL's SSL_OP_NO_* flags allow discontinuous version ranges. This is a
nuisance for two reasons. First it makes it unnecessarily difficult to answer
"are any versions below TLS 1.3 enabled?". Second the protocol does not allow
discontinuous version ranges on the client anyway. OpenSSL instead picks the
first continous range of enabled versions on the client, but not the server.
This is bizarrely inconsistent. It also doesn't quite do this as the
ClientHello sending logic does this, but not the ServerHello processing logic.
So we actually break some invariants slightly. The logic is also cumbersome in
DTLS which kindly inverts the comparison logic.
First, switch min_version/max_version's storage to normalized versions. Next
replace all the ad-hoc version-related functions with a single
ssl_get_version_range function. Client and server now consistently pick a
contiguous range of versions. Note this is a slight behavior change for
servers. Version-range-sensitive logic is rewritten to use this new function.
BUG=66
Change-Id: Iad0d64f2b7a917603fc7da54c9fc6656c5fbdb24
Reviewed-on: https://boringssl-review.googlesource.com/8513
Reviewed-by: David Benjamin <davidben@google.com>
This allows us to use CBB for all handshake messages. Now, SSL_PROTOCOL_METHOD
is responsible for implementing a trio of CBB-related hooks to assemble
handshake messages.
Change-Id: I144d3cac4f05b6637bf45d3f838673fc5c854405
Reviewed-on: https://boringssl-review.googlesource.com/8440
Reviewed-by: Adam Langley <agl@google.com>
Reorder states and functions by where they appear in the handshake. Remove
unnecessary hooks on SSL_PROTOCOL_METHOD.
Change-Id: I78dae9cf70792170abed6f38510ce870707e82ff
Reviewed-on: https://boringssl-review.googlesource.com/8184
Reviewed-by: David Benjamin <davidben@google.com>
This uses ssl3_read_bytes for now. We still need to dismantle that
function and then invert the handshake state machine, but this gets
things closer to the right shape as an intermediate step and is a large
chunk in itself. It simplifies a lot of the CCS/handshake
synchronization as a lot of the invariants much more clearly follow from
the handshake itself.
Tests need to be adjusted since this changes some error codes. Now all
the CCS/Handshake checks fall through to the usual
SSL_R_UNEXPECTED_RECORD codepath. Most of what used to be a special-case
falls out naturally. (If half of Finished was in the same record as the
pre-CCS message, that part of the handshake record would have been left
unconsumed, so read_change_cipher_spec would have noticed, just like
read_app_data would have noticed.)
Change-Id: I15c7501afe523d5062f0e24a3b65f053008d87be
Reviewed-on: https://boringssl-review.googlesource.com/6642
Reviewed-by: Adam Langley <agl@google.com>
ssl.h should be first. Also two lines after includes and the rest of the
file.
Change-Id: Icb7586e00a3e64170082c96cf3f8bfbb2b7e1611
Reviewed-on: https://boringssl-review.googlesource.com/5892
Reviewed-by: Adam Langley <agl@google.com>
They're not called (new in 1.0.2). We actually may well need to
configure these later to strike ECDSA from the list on Chrome/XP
depending on what TLS 1.3 does, but for now striking it from the cipher
suite list is both necessary and sufficient. I think we're better off
removing these for now and adding new APIs later if we need them.
(This API is weird. You pass in an array of NIDs that must be even
length and alternating between hash and signature NID. We'd also need a
way to query the configured set of sigalgs to filter away. Those used to
exist but were removed in
https://boringssl-review.googlesource.com/#/c/5347/. SSL_get_sigalgs is
an even uglier API and doesn't act on the SSL_CTX.)
And with that, SSL_ctrl and SSL_CTX_ctrl can *finally* be dropped. Don't
leave no-op wrappers; anything calling SSL_ctrl and SSL_CTX_ctrl should
instead switch to the wrapper macros.
BUG=404754
Change-Id: I5d465cd27eef30d108eeb6de075330c9ef5c05e8
Reviewed-on: https://boringssl-review.googlesource.com/5675
Reviewed-by: Adam Langley <agl@google.com>
With SSL2 gone, there's no need for this split between the abstract
cipher framework and ciphers. Put the cipher suite table in ssl_cipher.c
and move other SSL_CIPHER logic there. With that gone, prune the
cipher-related hooks in SSL_PROTOCOL_METHOD.
BUG=468889
Change-Id: I48579de8bc4c0ea52781ba1b7b57bc5b4919d21c
Reviewed-on: https://boringssl-review.googlesource.com/4961
Reviewed-by: Adam Langley <agl@google.com>
The ctrl hooks are left alone since they should just go away.
Simplifying the cipher story will happen in the next CL.
BUG=468889
Change-Id: I979971c90f59c55cd5d17554f1253158b114f18b
Reviewed-on: https://boringssl-review.googlesource.com/4957
Reviewed-by: Adam Langley <agl@google.com>
This still needs significant work, especially the close_notify half, but
clarify the interface and get *_read_bytes out of SSL_PROTOCOL_METHOD.
read_bytes is an implementation detail of those two and get_message
rather than both an implementation detail of get_message for handshake
and a (wholly inappropriate) exposed interface for the other two.
BUG=468889
Change-Id: I7dd23869e0b7c3532ceb2e9dd31ca25ea31128e7
Reviewed-on: https://boringssl-review.googlesource.com/4956
Reviewed-by: Adam Langley <agl@google.com>
The SSL_PROTOCOL_METHOD table needs work, but this makes it clearer
exactly what the shared interface between the upper later and TLS/DTLS
is.
BUG=468889
Change-Id: I38931c484aa4ab3f77964d708d38bfd349fac293
Reviewed-on: https://boringssl-review.googlesource.com/4955
Reviewed-by: Adam Langley <agl@google.com>
The only case where renego is supported is if we are a client and the
server sends a HelloRequest. That is still needed to support the renego
+ client auth hack in Chrome. Beyond that, no other forms of renego will
work.
The messy logic where the handshake loop is repurposed to send
HelloRequest and the extremely confusing tri-state s->renegotiate (which
makes SSL_renegotiate_pending a lie during the initial handshake as a
server) are now gone. The next change will further simplify things by
removing ssl->s3->renegotiate and the renego deferral logic. There's
also some server-only renegotiation checks that can go now.
Also clean up ssl3_read_bytes' HelloRequest handling. The old logic relied on
the handshake state machine to reject bad HelloRequests which... actually that
code probably lets you initiate renego by sending the first four bytes of a
ServerHello and expecting the peer to read it later.
BUG=429450
Change-Id: Ie0f87d0c2b94e13811fe8e22e810ab2ffc8efa6c
Reviewed-on: https://boringssl-review.googlesource.com/4824
Reviewed-by: Adam Langley <agl@google.com>
Document them while I'm here. This adds a new 'preprocessor
compatibility section' to avoid breaking #ifdefs. The CTRL values
themselves are defined to 'doesnt_exist' to catch anything calling
SSL_ctrl directly until that function can be unexported completely.
BUG=404754
Change-Id: Ia157490ea8efe0215d4079556a0c7643273e7601
Reviewed-on: https://boringssl-review.googlesource.com/4553
Reviewed-by: Adam Langley <agl@google.com>
Match the other internal headers.
Change-Id: Iff7e2dd06a1a7bf993053d0464cc15638ace3aaa
Reviewed-on: https://boringssl-review.googlesource.com/4280
Reviewed-by: Adam Langley <agl@google.com>
This too isn't version-specific. This removes the final difference between TLS
and DTLS SSL3_ENC_METHODs and we can fold them together. (We should be able to
fold away the version-specific differences too, but all in due time.)
Change-Id: I6652d3942a0970273d46d28d7052629c81f848b5
Reviewed-on: https://boringssl-review.googlesource.com/3771
Reviewed-by: Adam Langley <agl@google.com>
It's never called or implemented.
Change-Id: Id41c2fbd23d27cc440e8a23ac1b2d590e50ff20f
Reviewed-on: https://boringssl-review.googlesource.com/3770
Reviewed-by: Adam Langley <agl@google.com>
None of these are version-specific. SSL_PROTOCOL_METHOD's interface will change
later, but this gets us closer to folding away SSL3_ENC_METHOD.
Change-Id: Ib427cdff32d0701a18fe42a52cdbf798f82ba956
Reviewed-on: https://boringssl-review.googlesource.com/3769
Reviewed-by: Adam Langley <agl@google.com>
State on s3 gets freed in both ssl3_clear and ssl3_free. Considate to just
ssl3_free. This replaces the (SSL,ssl,ssl3)_clear calls in (SSL,ssl,ssl3)_new
with the state that was initialized. This results in a little code duplication
between SSL_new and SSL_clear because state is on the wrong object. I've just
left TODOs for now; some of it will need disentangling.
We're far from it, but going forward, separate state between s and s->s3 as:
- s contains configuration state, DTLS or TLS. It is initialized from SSL_CTX,
configurable directly afterwards, and preserved across SSL_clear calls.
(Including when it's implicitly set as part of a handshake callback.)
- Connection state hangs off s->s3 (TLS) and s->d1 (DTLS). It is reset across
SSL_clear. This should happen naturally out of a ssl_free/ssl_new pair.
The goal is to avoid needing separate initialize and reset code for anything;
the point any particular state is reset is the point its owning context is
destroyed and recreated.
Change-Id: I5d779010778109f8c339c07433a0777feaf94d1f
Reviewed-on: https://boringssl-review.googlesource.com/2822
Reviewed-by: Adam Langley <agl@google.com>
This change has no semantic effect (I hope!). It's just a reformatting
of a few files in ssl/. This is just a start – the other files in ssl/
should follow in the coming days.
Change-Id: I5eb3f4b18d0d46349d0f94d3fe5ab2003db5364e
This makes SSLv23_method go through DTLS_ANY_VERSION's version negotiation
logic. This allows us to get rid of duplicate ClientHello logic. For
compatibility, SSL_METHOD is now split into SSL_PROTOCOL_METHOD and a version.
The legacy version-locked methods set min_version and max_version based this
version field to emulate the original semantics.
As a bonus, we can now handle fragmented ClientHello versions now.
Because SSLv23_method is a silly name, deprecate that too and introduce
TLS_method.
Change-Id: I8b3df2b427ae34c44ecf972f466ad64dc3dbb171
SSL3_ENC_METHOD will remain version-specific while SSL_METHOD will become
protocol-specific. This finally removes all the version-specific portions of
SSL_METHOD but the version tag itself.
(SSL3_ENC_METHOD's version-specific bits themselves can probably be handled by
tracking a canonicalized protocol version. It would simplify version
comparisons anyway. The one catch is SSLv3 has a very different table. But
that's a cleanup for future. Then again, perhaps a version-specific method
table swap somewhere will be useful later for TLS 1.3.)
Much of this commit was generated with sed invocation:
s/method->ssl3_enc/enc_method/g
Change-Id: I2b192507876aadd4f9310240687e562e56e6c0b1
Reviewed-on: https://boringssl-review.googlesource.com/2581
Reviewed-by: Adam Langley <agl@google.com>
They're always known now. Also fix the SSLv23_{client,server}_method
definitions still had their own macro invocations.
Change-Id: Ia13f29a27f2331d25a4051e83f2d5abc62fab981
Reviewed-on: https://boringssl-review.googlesource.com/2562
Reviewed-by: Adam Langley <agl@google.com>
Supporting both schemes seems pointless. Now that s->server and s->state are
set appropriately late and get_ssl_method is gone, the only difference is that
the client/server ones have non-functional ssl_accept or ssl_connect hooks. We
can't lose the generic ones, so let's unify on that.
Note: this means a static linker will no longer drop the client or server
handshake code if unused by a consumer linking statically. However, Chromium
needs the server half anyway for DTLS and WebRTC, so that's probably a lost
cause. Android also exposes server APIs.
Change-Id: I290f5fb4ed558f59fadb5d1f84e9d9c405004c23
Reviewed-on: https://boringssl-review.googlesource.com/2440
Reviewed-by: Adam Langley <agl@google.com>
This is a bit of cleanup that probably should have been done at the same time
as 30ddb434bf.
For now, version negotiation is implemented with a method swap. It also
performs this swap on SSL_set_session, but this was neutered in
30ddb434bf. Rather than hackishly neuter it,
remove it outright. In addition, remove SSL_set_ssl_method. Now all method
swaps are internal: SSLv23_method switch to a version-specific method and
SSL_clear undoing it.
Note that this does change behavior: if an SSL* is created with one
version-specific method and we SSL_set_session to a session from a /different/
version, we would switch to the /other/ version-specific method. This is
extremely confusing, so it's unlikely anyone was actually expecting it.
Version-specific methods in general don't work well.
Change-Id: I72a5c1f321ca9aeb1b52ebe0317072950ba25092
Reviewed-on: https://boringssl-review.googlesource.com/2390
Reviewed-by: Adam Langley <agl@google.com>
Initial fork from f2d678e6e89b6508147086610e985d4e8416e867 (1.0.2 beta).
(This change contains substantial changes from the original and
effectively starts a new history.)
