It is redundant given the other state in the connection.
Change-Id: I5dc71627132659ab4316a5ea360c9ca480fb7c6c
Reviewed-on: https://boringssl-review.googlesource.com/6646
Reviewed-by: Adam Langley <agl@google.com>
These have been unused since we unified everything on EVP_AEAD. I must
have missed them when clearing out dead state. This shaves 136 bytes of
per-connection state.
Change-Id: I705f8de389fd34ab4524554ee9e4b1d6be198994
Reviewed-on: https://boringssl-review.googlesource.com/6645
Reviewed-by: Adam Langley <agl@google.com>
There's no need to track consumed bytes, so rr->data and rr->off may be
merged together.
Change-Id: I8842d005665ea8b4d4a0cced941f3373872cdac4
Reviewed-on: https://boringssl-review.googlesource.com/6644
Reviewed-by: Adam Langley <agl@google.com>
38 error codes have fallen off the list since the last time we did this.
Change-Id: Id7ee30889a5da2f6ab66957fd8e49e97640c8489
Reviewed-on: https://boringssl-review.googlesource.com/6643
Reviewed-by: Adam Langley <agl@google.com>
This uses ssl3_read_bytes for now. We still need to dismantle that
function and then invert the handshake state machine, but this gets
things closer to the right shape as an intermediate step and is a large
chunk in itself. It simplifies a lot of the CCS/handshake
synchronization as a lot of the invariants much more clearly follow from
the handshake itself.
Tests need to be adjusted since this changes some error codes. Now all
the CCS/Handshake checks fall through to the usual
SSL_R_UNEXPECTED_RECORD codepath. Most of what used to be a special-case
falls out naturally. (If half of Finished was in the same record as the
pre-CCS message, that part of the handshake record would have been left
unconsumed, so read_change_cipher_spec would have noticed, just like
read_app_data would have noticed.)
Change-Id: I15c7501afe523d5062f0e24a3b65f053008d87be
Reviewed-on: https://boringssl-review.googlesource.com/6642
Reviewed-by: Adam Langley <agl@google.com>
With server-side renegotiation gone, handshake_fragment's only purpose
in life is to handle a fragmented HelloRequest (we probably do need to
support those if some server does 1/n-1 record-splitting on handshake
records). The logic to route the data into
ssl3_read_bytes(SSL3_RT_HANDSHAKE) never happens, and the contents are
always a HelloRequest prefix.
This also trims a tiny bit of per-connection state.
Change-Id: Ia1b0dda5b7e79d817c28da1478640977891ebc97
Reviewed-on: https://boringssl-review.googlesource.com/6641
Reviewed-by: Adam Langley <agl@google.com>
This callback is never used. The one caller I've ever seen is in Android
code which isn't built with BoringSSL and it was a no-op.
It also doesn't actually make much sense. A callback cannot reasonably
assume that it sees every, say, SSL_CTX created because the index may be
registered after the first SSL_CTX is created. Nor is there any point in
an EX_DATA consumer in one file knowing about an SSL_CTX created in
completely unrelated code.
Replace all the pointers with a typedef to int*. This will ensure code
which passes NULL or 0 continues to compile while breaking code which
passes an actual function.
This simplifies some object creation functions which now needn't worry
about CRYPTO_new_ex_data failing. (Also avoids bouncing on the lock, but
it's taking a read lock, so this doesn't really matter.)
BUG=391192
Change-Id: I02893883c6fa8693682075b7b130aa538a0a1437
Reviewed-on: https://boringssl-review.googlesource.com/6625
Reviewed-by: Adam Langley <agl@google.com>
Then deprecate the old functions. Thanks to upstream's
6977e8ee4a718a76351ba5275a9f0be4e530eab5 for the idea.
Change-Id: I916abd6fca2a3b2a439ec9902d9779707f7e41eb
Reviewed-on: https://boringssl-review.googlesource.com/6622
Reviewed-by: Adam Langley <agl@google.com>
It has no callers. I prepped for its removal earlier with
c05697c2c5
and then completely forgot.
Thanks to upstream's 6f78b9e824c053d062188578635c575017b587c5 for
the reminder. Quoth them:
> This only gets used to set a specific curve without actually checking
> that the peer supports it or not and can therefor result in handshake
> failures that can be avoided by selecting a different cipher.
It's also a very confusing API since it does NOT pass ownership of the
EC_KEY to the caller.
Change-Id: I6a00643b3a2d6746e9e0e228b47c2bc9694b0084
Reviewed-on: https://boringssl-review.googlesource.com/6621
Reviewed-by: Adam Langley <agl@google.com>
I don't think we're ever going to manage to enforce this, and it doesn't
seem worth the trouble. We don't support application protocols which use
renegotiation outside of the HTTP/1.1 mid-stream client auth hack.
There, it's on the server to reject legacy renegotiations.
This removes the last of SSL_OP_ALL.
Change-Id: I996fdeaabf175b6facb4f687436549c0d3bb0042
Reviewed-on: https://boringssl-review.googlesource.com/6580
Reviewed-by: Adam Langley <agl@google.com>
This dates to SSLeay 0.8.0 (or earlier). The use counter sees virtually
no hits.
Change-Id: Iff4c8899d5cb0ba4afca113c66d15f1d980ffe41
Reviewed-on: https://boringssl-review.googlesource.com/6558
Reviewed-by: Adam Langley <agl@google.com>
This dates to SSLeay 0.9.0. The Internet seems to have completely
forgotten what "D5" is. (I can't find reference to it beyond
documentation of this quirk.) The use counter we added sees virtually no
hits.
Change-Id: I9781d401acb98ce3790b1b165fc257a6f5e9b155
Reviewed-on: https://boringssl-review.googlesource.com/6557
Reviewed-by: Adam Langley <agl@google.com>
BUG=webrtc:5222
Change-Id: I8399bd595564dedbe5492b8ea6eb915f41367cbf
Reviewed-on: https://boringssl-review.googlesource.com/6690
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: David Benjamin <davidben@google.com>
Trim the cipher table further. Those values are entirely determined by
algorithm_enc.
Change-Id: I355c245b0663e41e54e62d15903a4a9a667b4ffe
Reviewed-on: https://boringssl-review.googlesource.com/6516
Reviewed-by: Adam Langley <agl@google.com>
FIPS is the same as HIGH (but for CHACHA20), so those are redundant.
Likewise, MEDIUM vs HIGH was just RC4. Remove those in favor of
redefining those legacy rules to mean this.
One less field to keep track of in each cipher.
Change-Id: I2b2489cffb9e16efb0ac7d7290c173cac061432a
Reviewed-on: https://boringssl-review.googlesource.com/6515
Reviewed-by: Adam Langley <agl@google.com>
It's redundant with other cipher properties. We can express these in code.
Cipher rule matching gets a little bit complicated due to the confusing legacy
protocol version cipher rules, so add some tests for it. (It's really hard to
grep for uses of them, so I've kept them working to be safe.)
Change-Id: Ic6b3fcd55d76d4a51b31bf7ae629a2da50a7450e
Reviewed-on: https://boringssl-review.googlesource.com/6453
Reviewed-by: Adam Langley <agl@google.com>
The keylog BIO is internally synchronized by the SSL_CTX lock, but an
application may wish to log keys from multiple SSL_CTXs. This is in
preparation for switching Chromium to use a separate SSL_CTX per profile
to more naturally split up the session caches.
It will also be useful for routing up SSLKEYLOGFILE in WebRTC. There,
each log line must be converted to an IPC up from the renderer
processes.
This will require changes in Chromium when we roll BoringSSL.
BUG=458365,webrtc:4417
Change-Id: I2945bdb4def0a9c36e751eab3d5b06c330d66b54
Reviewed-on: https://boringssl-review.googlesource.com/6514
Reviewed-by: Adam Langley <agl@google.com>
Change-Id: I3072f884be77b8646e90d316154b96448f0cf2a1
Reviewed-on: https://boringssl-review.googlesource.com/6520
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
So long as we're not getting rid of them (the certificate variants may
be useful when we decouple from crypto/x509 anyway), get the types and
bounds checks right.
Also reject trailing data and require the input be a single element.
Note: this is a slight compatibility risk, but we did it for
SSL*_use_RSAPrivateKey_ASN1 previously and I think it's probably worth
seeing if anything breaks here.
Change-Id: I64fa3fc6249021ccf59584d68e56ff424a190082
Reviewed-on: https://boringssl-review.googlesource.com/6490
Reviewed-by: Adam Langley <agl@google.com>
dh.c had a 10k-bit limit but it wasn't quite correctly enforced. However,
that's still 1.12s of jank on the IO thread, which is too long. Since the SSL
code consumes DHE groups from the network, it should be responsible for
enforcing what sanity it needs on them.
Costs of various bit lengths on 2013 Macbook Air:
1024 - 1.4ms
2048 - 14ms
3072 - 24ms
4096 - 55ms
5000 - 160ms
10000 - 1.12s
UMA says that DHE groups are 0.2% 4096-bit and otherwise are 5.5% 2048-bit and
94% 1024-bit and some noise. Set the limit to 4096-bit to be conservative,
although that's already quite a lot of jank.
BUG=554295
Change-Id: I8e167748a67e4e1adfb62d73dfff094abfa7d215
Reviewed-on: https://boringssl-review.googlesource.com/6464
Reviewed-by: Adam Langley <agl@google.com>
This exposes the ServerKeyExchange signature hash type used in the most recent
handshake, for histogramming on the client.
BUG=549662
Change-Id: I8a4e00ac735b1ecd2c2df824112c3a0bc62332a7
Reviewed-on: https://boringssl-review.googlesource.com/6413
Reviewed-by: Adam Langley <agl@google.com>
Later when TLS 1.3 comes around, we'll need SSL_CIPHER_get_max_version too. In
the meantime, hide the SSL_TLSV1_2 messiness behind a reasonable API.
Change-Id: Ibcc17cccf48dd99e364d6defdfa5a87d031ecf0a
Reviewed-on: https://boringssl-review.googlesource.com/6452
Reviewed-by: Adam Langley <agl@google.com>
This change fixes up several comments (many of which were spotted by
Kenny Root) and also changes doc.go to detect cases where comments don't
start with the correct word. (This is a common error.)
Since we have docs builders now, these errors will be found
automatically in the future.
Change-Id: I58c6dd4266bf3bd4ec748763c8762b1a67ae5ab3
Reviewed-on: https://boringssl-review.googlesource.com/6440
Reviewed-by: Adam Langley <agl@google.com>
This function allows one to extract the current IVs from an SSL
connection. This is needed for the CBC cipher suites with implicit IVs
because, for those, the IV can't be extracted from the handshake key
material.
Change-Id: I247a1d0813b7a434b3cfc88db86d2fe8754344b6
Reviewed-on: https://boringssl-review.googlesource.com/6433
Reviewed-by: Adam Langley <agl@google.com>
They run through completely different logic as only handshake is fragmented.
This'll make it easier to rewrite the handshake logic in a follow-up.
Change-Id: I9515feafc06bf069b261073873966e72fcbe13cb
Reviewed-on: https://boringssl-review.googlesource.com/6420
Reviewed-by: Adam Langley <agl@google.com>
This option causes clients to ignore HelloRequest messages completely.
This can be suitable in cases where a server tries to perform concurrent
application data and handshake flow, e.g. because they are trying to
“renew” symmetric keys.
Change-Id: I2779f7eff30d82163f2c34a625ec91dc34fab548
Reviewed-on: https://boringssl-review.googlesource.com/6431
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
Although the DTLS transport layer logic drops failed writes on the floor, it is
actually set up to work correctly. If an SSL_write fails at the transport,
dropping the buffer is fine. Arguably it works better than in TLS because we
don't have the weird "half-committed to data" behavior. Likewise, the handshake
keeps track of how far its gotten and resumes the message at the right point.
This broke when the buffering logic was rewritten because I didn't understand
what the DTLS code was doing. The one thing that doesn't work as one might
expect is non-fatal write errors during rexmit are not recoverable. The next
timeout must fire before we try again.
This code is quite badly sprinkled in here, so add tests to guard it against
future turbulence. Because of the rexmit issues, the tests need some hacks
around calls which may trigger them. It also changes the Go DTLS implementation
from being completely strict about sequence numbers to only requiring they be
monotonic.
The tests also revealed another bug. This one seems to be upstream's fault, not
mine. The logic to reset the handshake hash on the second ClientHello (in the
HelloVerifyRequest case) was a little overenthusiastic and breaks if the
ClientHello took multiple tries to send.
Change-Id: I9b38b93fff7ae62faf8e36c4beaf848850b3f4b9
Reviewed-on: https://boringssl-review.googlesource.com/6417
Reviewed-by: Adam Langley <agl@google.com>
This is a fairly timid, first step at trying to pack common structures a
little better.
This change reorders a couple of structures a little and turns some
variables into bit-fields. Much more can still be done.
Change-Id: Idbe0f54d66559c0ad654bf7e8dea277a771a568f
Reviewed-on: https://boringssl-review.googlesource.com/6394
Reviewed-by: Adam Langley <agl@google.com>
This came up and I wasn't sure which it was without source-diving.
Change-Id: Ie659096e0f42a7448f81dfb1006c125d292fd7fd
Reviewed-on: https://boringssl-review.googlesource.com/6354
Reviewed-by: Adam Langley <alangley@gmail.com>
Right whether NPN is advertised can only be configured globally on the SSL_CTX.
Rather than adding two pointers to each SSL*, add an options bit to disable it
so we may plumb in a field trial to disable NPN.
Chromium wants to be able to route a bit in to disable NPN, but it uses SSL_CTX
incorrectly and has a global one, so it can't disconnect the callback. (That
really needs to get fixed. Although it's not clear this necessarily wants to be
lifted up to SSL_CTX as far as Chromium's SSLClientSocket is concerned since
NPN doesn't interact with the session cache.)
BUG=526713
Change-Id: I49c86828b963eb341c6ea6a442557b7dfa190ed3
Reviewed-on: https://boringssl-review.googlesource.com/6351
Reviewed-by: Adam Langley <alangley@gmail.com>
The internal session cache is keyed on session ID, so this is completely
useless for clients (indeed we never look it up internally). Along the way,
tidy up ssl_update_cache to be more readable. The slight behavior change is
that SSL_CTX_add_session's return code no longer controls the external
callback. It's not clear to me what that could have accomplished. (It can only
fail on allocation error. We only call it for new sessions, so the duplicate
case is impossible.)
The one thing of value the internal cache might have provided is managing the
timeout. The SSL_CTX_flush_sessions logic would flip the not_resumable bit and
cause us not to offer expired sessions (modulo SSL_CTX_flush_sessions's delay
and any discrepancies between the two caches). Instead, just check expiration
when deciding whether or not to offer a session.
This way clients that set SSL_SESS_CACHE_CLIENT blindly don't accidentally
consume gobs of memory.
BUG=531194
Change-Id: If97485beab21874f37737edc44df24e61ce23705
Reviewed-on: https://boringssl-review.googlesource.com/6321
Reviewed-by: Adam Langley <alangley@gmail.com>
In doing so, fix the documentation for SSL_CTX_add_session and
SSL_CTX_remove_session. I misread the code and documented the behavior
on session ID collision wrong.
Change-Id: I6f364305e1f092b9eb0b1402962fd04577269d30
Reviewed-on: https://boringssl-review.googlesource.com/6319
Reviewed-by: Adam Langley <alangley@gmail.com>
A random 32-byte (so 256-bit) session ID is never going to collide with
an existing one. (And, if it does, SSL_CTX_add_session does account for
this, so the server won't explode. Just attempting to resume some
session will fail.)
That logic didn't completely work anyway as it didn't account for
external session caches or multiple connections picking the same ID in
parallel (generation and insertion happen at different times) or
multiple servers sharing one cache. In theory one could fix this by
passing in a sufficiently clever generate_session_id, but no one does
that.
I found no callers of these functions, so just remove them altogether.
Change-Id: I8500c592cf4676de6d7194d611b99e9e76f150a7
Reviewed-on: https://boringssl-review.googlesource.com/6318
Reviewed-by: Adam Langley <alangley@gmail.com>
Private structs shouldn't be shown. Also there's a few sections that are
really more implementation details than anything else.
Change-Id: Ibc5a23ba818ab0531d9c68e7ce348f1eabbcd19a
Reviewed-on: https://boringssl-review.googlesource.com/6313
Reviewed-by: Adam Langley <alangley@gmail.com>
Although Chromium actually uses SSL_(get_)state as part of its fallback
reason heuristic, that function really should go in the deprecated
bucket. I kept SSL_state_string_long since having a human-readable
string is probably useful for logging.
SSL_set_SSL_CTX was only half-documented as the behavior of this
function is very weird. This warrants further investigation and
rethinking.
SSL_set_shutdown is absurd. I added an assert to trip up clearing bits
and set it to a bitwise OR since clearing bits may mess up the state
machine. Otherwise there's enough consumers and it's not quite the same
as SSL_CTX_set_quiet_shutdown that I've left it alone for now.
Change-Id: Ie35850529373a5a795f6eb04222668ff76d84aaa
Reviewed-on: https://boringssl-review.googlesource.com/6312
Reviewed-by: Adam Langley <alangley@gmail.com>
It just calls CRYPTO_library_init and doesn't do anything else. If
anything, I'd like to make CRYPTO_library_init completely go away too.
We have CRYPTO_once now, so I think it's safe to assume that, if ssl/
ever grows initialization needs beyond that of crypto/, we can hide it
behind a CRYPTO_once and not burden callers.
Change-Id: I63dc362e0e9e98deec5516f4620d1672151a91b6
Reviewed-on: https://boringssl-review.googlesource.com/6311
Reviewed-by: Adam Langley <alangley@gmail.com>
SSL_in_connect_init and SSL_in_accept_init are removed as they're unused
both within the library and externally. They're also kind of silly.
Expand on how False Start works at the API level in doing so.
Change-Id: Id2a8e34b5bb8f28329e3b87b4c64d41be3f72410
Reviewed-on: https://boringssl-review.googlesource.com/6310
Reviewed-by: Adam Langley <alangley@gmail.com>
They were since added to crypto.h and implemented in the library proper.
Change-Id: Idaa2fe2d9b213e67cf7ef61ff8bfc636dfa1ef1f
Reviewed-on: https://boringssl-review.googlesource.com/6309
Reviewed-by: Adam Langley <alangley@gmail.com>
They're really not all that helpful, considering they're each used
exactly once. They're also confusing as it is ALMOST the case that
SSL_TXT_FOO expands to "FOO", but SSL_TXT_AES_GCM expand "AESGCM" and
the protocol versions have lowercase v's and dots.
Change-Id: If78ad8edb0c024819219f61675c60c2a7f3a36b0
Reviewed-on: https://boringssl-review.googlesource.com/6307
Reviewed-by: Adam Langley <alangley@gmail.com>
This callback is some combination of arguably useful stuff (bracket
handshakes, alerts) and completely insane things (find out when the
state machine advances). Deprecate the latter.
Change-Id: Ibea5b32cb360b767b0f45b302fd5f1fe17850593
Reviewed-on: https://boringssl-review.googlesource.com/6305
Reviewed-by: Adam Langley <alangley@gmail.com>
Also clean up the code slightly.
Change-Id: I066a389242c46cdc7d41b1ae9537c4b7716c92a2
Reviewed-on: https://boringssl-review.googlesource.com/6302
Reviewed-by: Adam Langley <alangley@gmail.com>
Like tls1.h, ssl3.h is now just a bundle of protocol constants.
Hopefully we can opaquify this struct in due time, but for now it's
still public.
Change-Id: I68366eb233702e149c92e21297f70f8a4a45f060
Reviewed-on: https://boringssl-review.googlesource.com/6300
Reviewed-by: Adam Langley <alangley@gmail.com>
