It is impossible to have an SSL* without a corresponding method.
Change-Id: Icaf826a06aaaa2c7caf98b1e4a950f9c1d48e6bd
Reviewed-on: https://boringssl-review.googlesource.com/12621
Reviewed-by: Adam Langley <agl@google.com>
There is no need to retain it beyond this point.
Change-Id: Ib5722ab30fc013380198b1582d1240f0fe0aa770
Reviewed-on: https://boringssl-review.googlesource.com/12620
Reviewed-by: Adam Langley <agl@google.com>
These too have no reason to be called across files.
Change-Id: Iee477e71f956c2fa0d8817bf2777cb3a81e1c853
Reviewed-on: https://boringssl-review.googlesource.com/12585
Reviewed-by: Adam Langley <agl@google.com>
s3_lib.c is nearly gone. ssl_get_cipher_preferences will fall away once
we remove the version-specific cipher lists. ssl_get_algorithm_prf and
the PRF stuff in general needs some revising (it was the motivation for
all the SSL_HANDSHAKE business). I've left ssl3_new / ssl3_free alone
for now because we don't have a good separation between common TLS/DTLS
connection state and state internal to the TLS SSL_PROTOCOL_METHOD.
Leaving that alone for now as there's lower-hanging fruit.
Change-Id: Idf7989123a387938aa89b6a052161c9fff4cbfb3
Reviewed-on: https://boringssl-review.googlesource.com/12584
Reviewed-by: Adam Langley <agl@google.com>
d2i_X509 will free an existing |X509*| on parse failure. Thus
|X509_parse_from_buffer| would double-free the result on error.
Change-Id: If2bca2f1e1895bc426079f6ade4b82008707888d
Reviewed-on: https://boringssl-review.googlesource.com/12635
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This was useful when we were transitioning NPN off in Chromium, but now
there are no callers remaining.
Change-Id: Ic619613d6d475eea6bc258c4a90148f129ea4a81
Reviewed-on: https://boringssl-review.googlesource.com/12637
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Change-Id: I6514d68435ac4b7e2c638c7612b57bde5886bbba
Reviewed-on: https://boringssl-review.googlesource.com/12629
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
We've taken to writing bssl::UniquePtr in full, so it's not buying
us much.
Change-Id: Ia2689366cbb17282c8063608dddcc675518ec0ca
Reviewed-on: https://boringssl-review.googlesource.com/12628
Reviewed-by: David Benjamin <davidben@google.com>
This was only used by Chromium and was since replaced with a custom BIO.
Though it meant a new ring buffer implementation, custom BIOs seem a
better solution for folks who wish to do particularly complicated
things, until the new SSL API is available. External-buffer BIO pairs
were effectively a really confusing and leaky abstraction over a ring
buffer anyway.
Change-Id: I0e201317ff87cdccb17b2f8c260ee5bb06c74771
Reviewed-on: https://boringssl-review.googlesource.com/12626
Commit-Queue: Adam Langley <agl@google.com>
Reviewed-by: Adam Langley <agl@google.com>
Change-Id: Ida26e32a700c68e1899f9f6ccff73e2fa5252313
Reviewed-on: https://boringssl-review.googlesource.com/12633
Commit-Queue: Adam Langley <agl@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This allows a consumer to disable Channel ID (for instance, it may be
enabled on the SSL_CTX and later disabled on the SSL) without reaching
into the SSL struct directly.
Deprecate the old APIs in favor of these.
BUG=6
Change-Id: I193bf94bc1f537e1a81602a39fc2b9a73f44c73b
Reviewed-on: https://boringssl-review.googlesource.com/12623
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This is an API which we added, so only first-party code could be
conditioning on it.
Change-Id: I08217fcae47585b22142df05622e31b6dfb6e4d6
Reviewed-on: https://boringssl-review.googlesource.com/12622
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Each of these functions is called only once, but they're interspersed
between s3_lib.c and ssl_lib.c.
Change-Id: Ic496e364b091fc8e01fc0653fe73c83c47f690d9
Reviewed-on: https://boringssl-review.googlesource.com/12583
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
It's our ClientHello representation. May as well name it accordingly.
Also switch away from calling the variable name ctx as that conflicts
with SSL_CTX.
Change-Id: Iec0e597af37137270339e9754c6e08116198899e
Reviewed-on: https://boringssl-review.googlesource.com/12581
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
The various key schedule cleanups have removed the need for this enum.
Change-Id: I3269aa19b834815926ad56b2d919e21b5e2603fe
Reviewed-on: https://boringssl-review.googlesource.com/12582
Reviewed-by: Adam Langley <agl@google.com>
AES-GCM-SIV is an AEAD with nonce-misuse resistance. It can reuse
hardware support for AES-GCM and thus encrypt at ~66% the speed, and
decrypt at 100% the speed, of AES-GCM.
See https://tools.ietf.org/html/draft-irtf-cfrg-gcmsiv-02
This implementation is generic, not optimised, and reuses existing AES
and GHASH support as much as possible. It is guarded by !OPENSSL_SMALL,
at least for now.
Change-Id: Ia9f77b256ef5dfb8588bb9ecfe6ee0e827626f57
Reviewed-on: https://boringssl-review.googlesource.com/12541
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Change-Id: I1e28ba84de59336cab432d1db3dd9c6023909081
Reviewed-on: https://boringssl-review.googlesource.com/12625
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Change-Id: Ie46d45cdb07c692a789594e13040a1ce9d6cf83d
Reviewed-on: https://boringssl-review.googlesource.com/12640
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
The remaining direct accesses are in functions which expect to be called
in and out of the handshake. Accordingly, they are NULL-checked.
Change-Id: I07a7de6bdca7b6f8d09e22da11b8863ebf41389a
Reviewed-on: https://boringssl-review.googlesource.com/12343
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Change-Id: I84a8ff1d717f3291403f6fc49668c84f89b910da
Reviewed-on: https://boringssl-review.googlesource.com/12342
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Change-Id: I5ef0fe5cc3ae0d5029ae41db36e66d22d76f6158
Reviewed-on: https://boringssl-review.googlesource.com/12341
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Change-Id: Id8543a88929091eb004a5205a30b483253cdaa25
Reviewed-on: https://boringssl-review.googlesource.com/12319
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This removes all explicit ssl->s3->hs access in those files.
Change-Id: I801ca1c894936aecef21e56ec7e7acb9d1b99688
Reviewed-on: https://boringssl-review.googlesource.com/12318
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This takes care of many of the explicit ssl->s3->hs accesses.
Change-Id: I380fae959f3a7021d6de9d19a4ca451b9a0aefe5
Reviewed-on: https://boringssl-review.googlesource.com/12317
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This change will cause getrandom to be used in preference to
/dev/urandom when supported by the kernel.
This will also cause BoringSSL-using processes to block until the
entropy pool is initialised on systems that support getrandom(2).
Change-Id: I2d3a17891502c85884c77138ef0f3a719d7ecfe6
Reviewed-on: https://boringssl-review.googlesource.com/12421
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This cuts down on a lot of unchecked ssl->s3->hs accesses. Next is
probably the mass of extensions callbacks, and then we can play
whack-a-mole with git grep.
Change-Id: I81c506ea25c2569a51ceda903853465b8b567b0f
Reviewed-on: https://boringssl-review.googlesource.com/12237
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
We currently look up SSL_HANDSHAKE off of ssl->s3->hs everywhere, but
this is a little dangerous. Unlike ssl->s3->tmp, ssl->s3->hs may not be
present. Right now we just know not to call some functions outside the
handshake.
Instead, code which expects to only be called during a handshake should
take an explicit SSL_HANDSHAKE * parameter and can assume it non-NULL.
This replaces the SSL * parameter. Instead, that is looked up from
hs->ssl.
Code which is called in both cases, reads from ssl->s3->hs. Ultimately,
we should get to the point that all direct access of ssl->s3->hs needs
to be NULL-checked.
As a start, manage the lifetime of the ssl->s3->hs in SSL_do_handshake.
This allows the top-level handshake_func hooks to be passed in the
SSL_HANDSHAKE *. Later work will route it through the stack. False Start
is a little wonky, but I think this is cleaner overall.
Change-Id: I26dfeb95f1bc5a0a630b5c442c90c26a6b9e2efe
Reviewed-on: https://boringssl-review.googlesource.com/12236
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
There only needs to be a single place where we do the generic
initialisation. All the processor-specific implementations can just
return early.
Change-Id: Ifd8a9c3bd7bec1ee8307aaa7bbeb9afe575e8a47
Reviewed-on: https://boringssl-review.googlesource.com/12540
Reviewed-by: Adam Langley <alangley@gmail.com>
Commit-Queue: Adam Langley <alangley@gmail.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Previously, gcm.c contained a lot of workarounds for cases where BSWAP8
wasn't defined. Rather than handle this in each place, just make it
always available.
While we're here, make these macros inline functions instead and rename
them to something less likely to collide.
Change-Id: I9f2602f8b9965c63a86b177a8a084afb8b53a253
Reviewed-on: https://boringssl-review.googlesource.com/12479
Commit-Queue: Adam Langley <alangley@gmail.com>
Reviewed-by: Adam Langley <agl@google.com>
finishedHash should keep a running secret and incorporate entropy as is
available.
Change-Id: I2d245897e7520b2317bc0051fa4d821c32eeaa10
Reviewed-on: https://boringssl-review.googlesource.com/12586
Reviewed-by: Nick Harper <nharper@chromium.org>
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
I missed this one.
Change-Id: I642fb5878568870743727579126f63246ff179c5
Reviewed-on: https://boringssl-review.googlesource.com/12580
Commit-Queue: David Benjamin <davidben@google.com>
Reviewed-by: Adam Langley <agl@google.com>
CRYPTO_ghash_init exposes the (often hardware accelerated) internals for
evaluating GHASH. These can be used for evaluating POLYVAL[1] on
platforms where we don't have dedicated code for it.
[1] https://tools.ietf.org/html/draft-irtf-cfrg-gcmsiv-02#section-3
Change-Id: Ida49ce4911f8657fa384b0bca968daa2ac6b26c1
Reviewed-on: https://boringssl-review.googlesource.com/12478
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
The key is only needed during initialisation because after that point it
is implicit in the table of powers. So no need to keep it around. There
was a non-specific “haunted house” comment about not changing this, but
I've successfully tested with all the assembly versions so I think that
comment is no longer true.
Change-Id: Id110156afb528904f114d9a4ff2440e03a1a69b8
Reviewed-on: https://boringssl-review.googlesource.com/12477
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
The GCM code has lots of cases of big-endian support left over from
OpenSSL. Since we don't support big-endian systems, drop that code.
Change-Id: I28eb95a9c235c6f705a145fbea72e7569dad2c70
Reviewed-on: https://boringssl-review.googlesource.com/12476
Commit-Queue: Adam Langley <agl@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This should shave 20% (40 seconds) off our Windows cycle times, going by
the graphs. It's 15% off our Linux ones, but that 15% is only 11
seconds.
Change-Id: I077c3924c722d597f66fc6dec72932ed0c81660a
Reviewed-on: https://boringssl-review.googlesource.com/12562
Reviewed-by: Adam Langley <agl@google.com>
bot_update does a git clean -dff before each run, so we were
redownloading all the utilities on each run. This should make the bots
only download them when the change. (Chromium's setup is similar.)
Change-Id: I7eb83217761ceabe58b5480242a7df93d9bfaa52
Reviewed-on: https://boringssl-review.googlesource.com/12561
Commit-Queue: David Benjamin <davidben@google.com>
Reviewed-by: Adam Langley <agl@google.com>
MSVC, on 32-bit systems, defines sizeof(long)=4 which means that a
uint32_t could end up negative when passed to |ASN1_INTEGER_set| on
Windows.
Change-Id: Ib07487ab524550c832909bf10521aae61d654416
Reviewed-on: https://boringssl-review.googlesource.com/12560
Commit-Queue: Adam Langley <agl@google.com>
Reviewed-by: Martin Kreichgauer <martinkr@google.com>
Reviewed-by: Adam Langley <agl@google.com>
j and md_size are public values, so this can just be done directly. (If
they weren't, we'd have worse problems.) This makes the loop look the
same as the rotation loop below.
Change-Id: Ic75550ad4e40b2015668cb12c26ca2d20bd285b6
Reviewed-on: https://boringssl-review.googlesource.com/12474
Commit-Queue: David Benjamin <davidben@google.com>
Reviewed-by: Adam Langley <agl@google.com>
Some declarations can be moved closer to use, etc.
Change-Id: Ifa9a51ad77639b94020b15478af234c82466390f
Reviewed-on: https://boringssl-review.googlesource.com/12473
Commit-Queue: David Benjamin <davidben@google.com>
Reviewed-by: Adam Langley <agl@google.com>
Although we ignore all but the first identity, keep clients honest by
parsing the whole thing. Also explicitly check that the binder and
identity counts match.
Change-Id: Ib9c4caae18398360f3b80f8db1b22d4549bd5746
Reviewed-on: https://boringssl-review.googlesource.com/12469
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Due to recent changes, changing the SSL session timeout from cert_cb is
not possible anymore since the new |SSL_SESSION| is initialized *after*
cert_cb is run. The alternative would be using |SSL_CTX_set_timeout| but
the specific |SSL_CTX| could be shared by multiple |SSL|s.
Setting a value on a per-connection basis is useful in case timeouts
need to be calculated dynamically based on specific certificate/domain
information that would be retrieved from inside cert_cb (or other
callbacks).
It would also be possible to set the value to 0 to prevent session
resumption, which is not otherwise doable in the handshake callbacks.
Change-Id: I730a528c647f83f7f77f59b5b21d7e060e4c9843
Reviewed-on: https://boringssl-review.googlesource.com/12440
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Change-Id: I69cbb0679e1dbb6292a8f4737851736e58c17508
Reviewed-on: https://boringssl-review.googlesource.com/12481
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
BUG=101
Change-Id: Ia1edbccee535b0bc3a0e18465286d5bcca240035
Reviewed-on: https://boringssl-review.googlesource.com/12470
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
There is no more derivation step. We just use the resumption secret
directly. This saves us an unnecessary memcpy.
Change-Id: I203bdcc0463780c47cce655046aa1be560bb5b18
Reviewed-on: https://boringssl-review.googlesource.com/12472
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
