It dates to 2000 from upstream and is only used when serving client auth to
Netscape. It will also get in the way when we get to merging DTLS and TLS
handshake functions because NETSCAPE_HANG_BUG is not valid for DTLS as it is
(the handshake fragmentation code will get confused).
Removing per comment on https://boringssl-review.googlesource.com/#/c/2602/
Change-Id: Ia2d086205bbfed002dc33b2203a47206f373b820
Reviewed-on: https://boringssl-review.googlesource.com/3214
Reviewed-by: Adam Langley <agl@google.com>
All but one field is a no-op.
Change-Id: Ib7bc59a12ce792d5e42fb6e04a4aff54f42643a9
Reviewed-on: https://boringssl-review.googlesource.com/3213
Reviewed-by: Adam Langley <agl@google.com>
This extends the packet adaptor protocol to send three commands:
type command =
| Packet of []byte
| Timeout of time.Duration
| TimeoutAck
When the shim processes a Timeout in BIO_read, it sends TimeoutAck, fails the
BIO_read, returns out of the SSL stack, advances the clock, calls
DTLSv1_handle_timeout, and continues.
If the Go side sends Timeout right between sending handshake flight N and
reading flight N+1, the shim won't read the Timeout until it has sent flight
N+1 (it only processes packet commands in BIO_read), so the TimeoutAck comes
after N+1. Go then drops all packets before the TimeoutAck, thus dropping one
transmit of flight N+1 without having to actually process the packets to
determine the end of the flight. The shim then sees the updated clock, calls
DTLSv1_handle_timeout, and re-sends flight N+1 for Go to process for real.
When dropping packets, Go checks the epoch and increments sequence numbers so
that we can continue to be strict here. This requires tracking the initial
sequence number of the next epoch.
The final Finished message takes an additional special-case to test. DTLS
triggers retransmits on either a timeout or seeing a stale flight. OpenSSL only
implements the former which should be sufficient (and is necessary) EXCEPT for
the final Finished message. If the peer's final Finished message is lost, it
won't be waiting for a message from us, so it won't time out anything. That
retransmit must be triggered on stale message, so we retransmit the Finished
message in Go.
Change-Id: I3ffbdb1de525beb2ee831b304670a3387877634c
Reviewed-on: https://boringssl-review.googlesource.com/3212
Reviewed-by: Adam Langley <agl@google.com>
This reverts commit c67a3ae6ba. With a
deterministic clock, we can now go back to being strict about retransmits. Our
tests will now require that the shim only retransmit when we expect it to.
Change-Id: Iab1deb9665dcd294790c8253d920089e83a9140c
Reviewed-on: https://boringssl-review.googlesource.com/3211
Reviewed-by: Adam Langley <agl@google.com>
This is so the tests needn't be sensitive to the clock. It is, unfortunately, a
test-only hook, but the DTLS retransmit/timeout logic more-or-less requires it
currently. Use this hook to, for now, freeze the clock at zero. This makes the
tests deterministic.
It might be worth designing a saner API in the future. The current one,
notably, requires that the caller's clock be compatible with the one we
internally use. It's also not clear whether the caller needs to call
DTLSv1_handle_timeout or can just rely on the state machine doing it internally
(as it does do). But mock clocks are relatively tame and WebRTC wants to
compile against upstream OpenSSL for now, so we're limited in how much new API
we can build.
Change-Id: I7aad51570596f69275ed0fc1a8892393e4b7ba13
Reviewed-on: https://boringssl-review.googlesource.com/3210
Reviewed-by: Adam Langley <agl@google.com>
Including string.h in base.h causes any file that includes a BoringSSL
header to include string.h. Generally this wouldn't be a problem,
although string.h might slow down the compile if it wasn't otherwise
needed. However, it also causes problems for ipsec-tools in Android
because OpenSSL didn't have this behaviour.
This change removes string.h from base.h and, instead, adds it to each
.c file that requires it.
Change-Id: I5968e50b0e230fd3adf9b72dd2836e6f52d6fb37
Reviewed-on: https://boringssl-review.googlesource.com/3200
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
The variable switches the default type for add_library from STATIC to SHARED.
We can condition additional stuff on that for convenience. (tabtest still
doesn't build.)
BoringSSL as any kind of stable system shared library is still very much
unsupported, but this is probably handy for making sure we don't forget all
those pesky OPENSSL_EXPORTs.
Change-Id: I66ab80bcddbf3724e03e85384141fdf4f4acbc2e
Reviewed-on: https://boringssl-review.googlesource.com/3092
Reviewed-by: Adam Langley <agl@google.com>
This is fatal for TLS but buffered in DTLS. The buffering isn't strictly
necessary (it would be just as valid to drop the record on the floor), but so
long as we want this behavior it should have a test.
Change-Id: I5846bb2fe80d78e25b6dfad51bcfcff2dc427c3f
Reviewed-on: https://boringssl-review.googlesource.com/3029
Reviewed-by: Adam Langley <agl@google.com>
They're not in the duplicated handshake state machines anyway. But we still
shouldn't negotiate them. d1_pkt.c assumes Finished is the only post-CCS
handshake message. An unexpected handshake message in the current epoch may
either be a retransmit/out-of-order message from the previous handshake, or a
message from the next handshake (also potentially out-of-order). In the former
case, we shouldn't spin up another handshake state machine instance.
(This assumption is required due to a protocol bug. DTLS resets sequence
numbers after a handshake, so it is necessary to categorize handshake fragments
by pre-CCS and post-CCS to distinguish between retransmit and renego.)
Change-Id: Ib3c1c7085c729e36a40f7ff14494733156924a24
Reviewed-on: https://boringssl-review.googlesource.com/3028
Reviewed-by: Adam Langley <agl@google.com>
This regressed in e95d20dcb8. EVP_AEAD will push
errors on the error queue (unlike the EVP_CIPHER codepath which checked
everything internally to ssl/ and didn't bother pushing anything). This meant
that a dropped packet would leave junk in the error queue.
Later, when SSL_read returns <= 0 (EOF or EWOULDBLOCK), the non-empty error
queue check in SSL_get_error kicks in and SSL_read looks to have failed.
BUG=https://code.google.com/p/webrtc/issues/detail?id=4214
Change-Id: I1e5e41c77a3e5b71e9eb0c72294abf0da677f840
Reviewed-on: https://boringssl-review.googlesource.com/2982
Reviewed-by: Adam Langley <agl@google.com>
This regressed in fcf25833bc. 0 return code on
unclean shutdown means the underlying BIO returned EOF, didn't push any error
code, but we haven't seen close_notify yet. The intent seems to be that you go
check errno or some BIO-specific equivalent if you care about close_notify.
Make sure test code routes all SSL_read return codes through SSL_get_error
since that's supposed to work in all cases.
(Note that rv == 0 can still give SSL_ERROR_SSL if the error queue is not
empty.)
Change-Id: I45bf9614573f876d93419ce169a4e0d9ceea9052
Reviewed-on: https://boringssl-review.googlesource.com/2981
Reviewed-by: Adam Langley <agl@google.com>
The distinction between publicly and non-publicly invalid is barely acted upon
and slightly silly now that the CBC padding check has been folded into
EVP_AEAD.
Change-Id: Idce4b9b8d29d624e3c95243a147265d071612127
Reviewed-on: https://boringssl-review.googlesource.com/2980
Reviewed-by: Adam Langley <agl@google.com>
This is an initial cut at aarch64 support. I have only qemu to test it
however—hopefully hardware will be coming soon.
This also affects 32-bit ARM in that aarch64 chips can run 32-bit code
and we would like to be able to take advantage of the crypto operations
even in 32-bit mode. AES and GHASH should Just Work in this case: the
-armx.pl files can be built for either 32- or 64-bit mode based on the
flavour argument given to the Perl script.
SHA-1 and SHA-256 don't work like this however because they've never
support for multiple implementations, thus BoringSSL built for 32-bit
won't use the SHA instructions on an aarch64 chip.
No dedicated ChaCha20 or Poly1305 support yet.
Change-Id: Ib275bc4894a365c8ec7c42f4e91af6dba3bd686c
Reviewed-on: https://boringssl-review.googlesource.com/2801
Reviewed-by: Adam Langley <agl@google.com>
SSL_library_init already loads the error strings (unlike upstream). Code which
calls both will end up loading error strings twice. Instead make the second
call a no-op.
Change-Id: Ifd34ab20ed46aabeba14661e58f8dac2bbb29f69
Reviewed-on: https://boringssl-review.googlesource.com/2790
Reviewed-by: Adam Langley <agl@google.com>
The under 32 constraint is silly; it's to check for duplicate curves in
library-supplied configuration. That API is new as of 1.0.2. It doesn't seem
worth bothering; if the caller supplies a repeated value, may as well emit a
repeated one and so be it. (Probably no one will ever call that function
outside of maybe test code anyway.)
While I'm here, remove the 0 constraint too. It's not likely to change, but
removing the return value overload seems easier than keeping comments about it
comments about it.
Change-Id: I01d36dba1855873875bb5a0ec84b040199e0e9bc
Reviewed-on: https://boringssl-review.googlesource.com/2844
Reviewed-by: Adam Langley <agl@google.com>
We only implement four curves (P-224, P-256, P-384, and P-521) and only
advertise the latter three by default. Don't maintain entries corresponding to
all the unimplemented curves.
Change-Id: I1816a10c6f849ca1d9d896bc6f4b64cd6b329481
Reviewed-on: https://boringssl-review.googlesource.com/2843
Reviewed-by: Adam Langley <agl@google.com>
They both happen to be zero, but OBJ_undef is a type error; OBJ_foo expands to
a comma-separated list of integers.
Change-Id: Ia5907dd3bc83240b7cc98af6456115d2efb48687
Reviewed-on: https://boringssl-review.googlesource.com/2842
Reviewed-by: Adam Langley <agl@google.com>
When parsing ClientHello clear any existing extension state from
SRP login and SRTP profile.
(Imported from upstream's 4f605ccb779e32a770093d687e0554e0bbb137d3)
More state that should be systematically reset across handshakes. Add a reset
on the ServerHello end too since that was missed.
Change-Id: Ibb4549acddfd87caf7b6ff853e2adbfa4b7e7856
Reviewed-on: https://boringssl-review.googlesource.com/2838
Reviewed-by: Adam Langley <agl@google.com>
write_quota should only be decremented by 1 in datagram mode, otherwise we'll
underflow and always allow writes through. This does not cause any existing
tests to fail.
(It will be useful once the bug in dtls1_do_write is fixed.)
Change-Id: I42aa001d7264790a3726269890635f679497fb1c
Reviewed-on: https://boringssl-review.googlesource.com/2831
Reviewed-by: Adam Langley <agl@google.com>
The existing comments are not very helpful. This code is also quite buggy.
Document two of them as TODOs.
Change-Id: Idfaf93d9c3b8b1ee92f2fb0d292ef513b5f6d824
Reviewed-on: https://boringssl-review.googlesource.com/2830
Reviewed-by: Adam Langley <agl@google.com>
BIO_ctrls do not have terribly well-defined return values on error. (Though the
existing ones seem to all return 0, not -1, on nonexistant operation.)
Change-Id: I08497f023ce3257c253aa71517a98b2fe73c3f74
Reviewed-on: https://boringssl-review.googlesource.com/2829
Reviewed-by: Adam Langley <agl@google.com>
g_probably_mtu and dtls1_guess_mtu is a bunch of logic for guessing the right
MTU, but it only ever returns the maximum (the input is always zero). Trim that
down to only what it actually does.
Change-Id: If3afe3f68ccb36cbf9c4525372564d16a4bbb73f
Reviewed-on: https://boringssl-review.googlesource.com/2828
Reviewed-by: Adam Langley <agl@google.com>
The retry doesn't actually work when we're sending a non-initial fragment; the
s->init_off != 0 block will get re-run each iteration through and continually
prepend headers. It can also infinite loop if the BIO reports
BIO_CTRL_DGRAM_MTU_EXCEEDED but either fails to report an MTU or reports an MTU
that always rounds up to the minimum. See upstream's
d3d9eef31661633f5b003a9e115c1822f79d1870.
WebRTC doesn't participate in any of the MTU logic and inherits the default
MTU, so just remove it for now.
Change-Id: Ib2ed2ba016b7c229811741fb7369c015ba0b551f
Reviewed-on: https://boringssl-review.googlesource.com/2827
Reviewed-by: Adam Langley <agl@google.com>
That setting means that the MTU is provided externally via SSL_set_mtu.
(Imported from upstream's 001235778a6e9c645dc0507cad6092d99c9af8f5)
Change-Id: I4e5743a9dee734ddd0235f080aefe98a7365aaf6
Reviewed-on: https://boringssl-review.googlesource.com/2826
Reviewed-by: Adam Langley <agl@google.com>
Based in part on upstream's cf75017bfd60333ff65edf9840001cd2c49870a3. This
situation really shouldn't be able to happen, but between no static asserts
that the minimum MTU is always large enough and a bug in reseting the MTU later
(to be fixed be a follow-up import from upstream), check these and return a
useful error code.
Change-Id: Ie853e5d35a6a7bc9c0032e74ae71529d490f4fe2
Reviewed-on: https://boringssl-review.googlesource.com/2825
Reviewed-by: Adam Langley <agl@google.com>
BoringSSL currently retransmits non-deterministically on an internal timer
(rather than one supplied externally), so the tests currently fail flakily
depending on timing. Valgrind is a common source for this. We still assume an
in-order and reliable channel, but drop retransmits silently:
- Handshake messages may arrive with old sequence numbers.
- Retransmitted CCS records arrive from the previous epoch.
- We may receive a retransmitted Finished after we believe the handshake has
completed. (Aside: even in a real implementation, only Finished is possible
here. Even with out-of-order delivery, retransmitted or reordered messages
earlier in the handshake come in under a different epoch.)
Note that because DTLS renego and a Finished retransmit are ambiguous at the
record layer[*], this precludes us writing tests for DTLS renego. But DTLS
renego should get removed anyway. As BoringSSL currently implements renego,
this ambiguity is also a source of complexity in the real implementation. (See
the SSL3_MT_FINISHED check in dtls1_read_bytes.)
[*] As a further fun aside, it's also complex if dispatching renego vs Finished
after handshake message reassembly. The spec doesn't directly say the sequence
number is reset across renegos, but it says "The first message each side
transmits in /each/ handshake always has message_seq = 0". This means that such
an implementation needs the handshake message reassembly logic be aware that a
Finished fragment with high sequence number is NOT an out-of-order fragment for
the next handshake.
Change-Id: I35d13560f82bcb5eeda62f4de1571d28c818cc36
Reviewed-on: https://boringssl-review.googlesource.com/2770
Reviewed-by: Adam Langley <agl@google.com>
As of our 82b7da271f, an SSL_SESSION created
externally always has a cipher set. Unknown ciphers are rejected early. Prior
to that, an SSL_SESSION would only have a valid cipher or valid cipher_id
depending on whether it came from an internal or external session cache.
See upstream's 6a8afe2201cd888e472e44225d3c9ca5fae1ca62 and
c566205319beeaa196e247400c7eb0c16388372b for more context.
Since we don't get ourselves into this strange situation and s->cipher is now
always valid for established SSL_SESSION objects (the existence of
unestablished SSL_SESSION objects during a handshake is awkward, but something
to deal with later), do away with s->cipher_id altogether. An application
should be able to handle failing to parse an SSL_SESSION instead of parsing it
successfuly but rejecting all resumptions.
Change-Id: I2f064a815e0db657b109c7c9269ac6c726d1ffed
Reviewed-on: https://boringssl-review.googlesource.com/2703
Reviewed-by: Adam Langley <agl@google.com>
This CL removes the last of the EVP_CIPHER codepath in ssl/. The dead code is
intentionally not pruned for ease of review, except in DTLS-only code where
adding new logic to support both, only to remove half, would be cumbersome.
Fixes made:
- dtls1_retransmit_state is taught to retain aead_write_ctx rather than
enc_write_ctx.
- d1_pkt.c reserves space for the variable-length nonce when echoed into the
packet.
- dtls1_do_write sizes the MTU based on EVP_AEAD max overhead.
- tls1_change_cipher_state_cipher should not free AEAD write contexts in DTLS.
This matches the (rather confused) ownership for the EVP_CIPHER contexts.
I've added a TODO to resolve this craziness.
A follow-up CL will remove all the resultant dead code.
Change-Id: I644557f4db53bbfb182950823ab96d5e4c908866
Reviewed-on: https://boringssl-review.googlesource.com/2699
Reviewed-by: Adam Langley <agl@google.com>
This introduces another knob into SSL_AEAD_CTX to omit the version from the ad
parameter. It also allows us to fold a few more SSL3_ENC_METHOD hooks together.
Change-Id: I6540d410d4722f734093554fb434dab6e5217d4f
Reviewed-on: https://boringssl-review.googlesource.com/2698
Reviewed-by: Adam Langley <agl@google.com>
This lets us fold away the SSLv3-specific generate_master_secret. Once SSLv3
uses AEADs, others will fold away as well.
Change-Id: I27c1b75741823bc6db920d35f5dd5ce71b6fdbb3
Reviewed-on: https://boringssl-review.googlesource.com/2697
Reviewed-by: Adam Langley <agl@google.com>
Fix up the generate_master_secret parameter while we're here.
Change-Id: I1c80796d1f481be0c3eefcf3222f2d9fc1de4a51
Reviewed-on: https://boringssl-review.googlesource.com/2696
Reviewed-by: Adam Langley <agl@google.com>
size_t all the parameters. Also explicitly label label as label. This is in
preparation for pulling the PRF out into SSL3_ENC_METHOD so more of the
SSL3_ENC_METHOD hooks may be shared between SSLv3 and TLS once SSLv3 uses
stateful AEADs.
Also port away from EVP_PKEY_HMAC and use HMAC_CTX directly. The abstraction
doesn't buy much and is different from all the other EVP_DigestSign* functions.
There are few enough users within BoringSSL and Google that we can probably
deprecate and eventually remove it altogether.
Change-Id: I5d4529438c8a2a992fc199388a0c9e73bd6d2e06
Reviewed-on: https://boringssl-review.googlesource.com/2695
Reviewed-by: Adam Langley <agl@google.com>
The EVP_CIPHER codepath should no longer be used with TLS. It still exists for
DTLS and SSLv3. The AEAD construction in TLS does not allow for
variable-overhead AEADs, so stateful AEADs do not include the length in the ad
parameter. Rather the AEADs internally append the unpadded length once it is
known. EVP_aead_rc4_md5_tls is modified to account for this.
Tests are added (and RC4-MD5's regenerated) for each of the new AEADs. The
cipher tests are all moved into crypto/cipher/test because there's now a lot of
them and they clutter the directory listing.
In ssl/, the stateful AEAD logic is also modified to account for stateful AEADs
with a fixed IV component, and for AEADs which use a random nonce (for the
explicit-IV CBC mode ciphers).
The new implementation fixes a bug/quirk in stateless CBC mode ciphers where
the fixed IV portion of the keyblock was generated regardless. This is at the
end, so it's only relevant for EAP-TLS which generates a MSK from the end of
the key block.
Change-Id: I2d8b8aa11deb43bde2fd733f4f90b5d5b8cb1334
Reviewed-on: https://boringssl-review.googlesource.com/2692
Reviewed-by: Adam Langley <agl@google.com>
It's not worth saving the extra mallocs. This is preparation for moving SSLv3
to stateful AEADs; it'll share code TLS's SSL3_ENC_METHOD, but
tls1_generate_key_block is different, so that'll be pulled out into its own
hook.
Change-Id: I3f2136600758465c66ce23736041bb47f74efa6d
Reviewed-on: https://boringssl-review.googlesource.com/2690
Reviewed-by: Adam Langley <agl@google.com>
More modern versions of GCC (at least with aarch64) are warning about an
unused value in these locations. It's incorrect, but I guess that the
macro is confusing it.
Using a (void) tag is a little ugly but solves the problem.
Change-Id: If6ba5083ab6e501c81e7743ae1ed99a89565e57c
Reviewed-on: https://boringssl-review.googlesource.com/2810
Reviewed-by: Adam Langley <agl@google.com>
The minimum MTU (not consistently enforced) is just under 256, so it's
difficult to test everything, but this is a basic test. (E.g., without renego,
the only handshake message with encryption is Finished which fits in the MTU.)
It tests the server side because the Certificate message is large enough to
require fragmentation.
Change-Id: Ida11f1057cebae2b800ad13696f98bb3a7fbbc5e
Reviewed-on: https://boringssl-review.googlesource.com/2824
Reviewed-by: Adam Langley <agl@google.com>
This should have been removed with its dtls1_clear cousin in
8c88153465.
Change-Id: Ibf4ee67348f603285b26766568cbb92183b62cee
Reviewed-on: https://boringssl-review.googlesource.com/2823
Reviewed-by: Adam Langley <agl@google.com>
State on s3 gets freed in both ssl3_clear and ssl3_free. Considate to just
ssl3_free. This replaces the (SSL,ssl,ssl3)_clear calls in (SSL,ssl,ssl3)_new
with the state that was initialized. This results in a little code duplication
between SSL_new and SSL_clear because state is on the wrong object. I've just
left TODOs for now; some of it will need disentangling.
We're far from it, but going forward, separate state between s and s->s3 as:
- s contains configuration state, DTLS or TLS. It is initialized from SSL_CTX,
configurable directly afterwards, and preserved across SSL_clear calls.
(Including when it's implicitly set as part of a handshake callback.)
- Connection state hangs off s->s3 (TLS) and s->d1 (DTLS). It is reset across
SSL_clear. This should happen naturally out of a ssl_free/ssl_new pair.
The goal is to avoid needing separate initialize and reset code for anything;
the point any particular state is reset is the point its owning context is
destroyed and recreated.
Change-Id: I5d779010778109f8c339c07433a0777feaf94d1f
Reviewed-on: https://boringssl-review.googlesource.com/2822
Reviewed-by: Adam Langley <agl@google.com>
Configuration data inherited from the ctx happens in SSL_new. (This also gets
in the way of using ssl3_free/ssl3_new to implement SSL_clear.)
Change-Id: I2773af91abf4e1edc0c1a324bc1e94088d7c2274
Reviewed-on: https://boringssl-review.googlesource.com/2821
Reviewed-by: Adam Langley <agl@google.com>
A memory leak can occur in dtls1_buffer_record if either of the calls to
ssl3_setup_buffers or pqueue_insert fail. The former will fail if there
is a malloc failure, whilst the latter will fail if attempting to add a
duplicate record to the queue. This should never happen because
duplicate records should be detected and dropped before any attempt to
add them to the queue. Unfortunately records that arrive that are for
the next epoch are not being recorded correctly, and therefore replays
are not being detected. Additionally, these "should not happen" failures
that can occur in dtls1_buffer_record are not being treated as fatal and
therefore an attacker could exploit this by sending repeated replay
records for the next epoch, eventually causing a DoS through memory
exhaustion.
Thanks to Chris Mueller for reporting this issue and providing initial
analysis and a patch. Further analysis and the final patch was performed
by Matt Caswell from the OpenSSL development team.
CVE-2015-0206
(Imported from upstream's 7c6a3cf2375f5881ef3f3a58ac0fbd0b4663abd1).
Change-Id: I765fe61c75bc295bcc4ab356b8a5ce88c8964764
Reviewed-on: https://boringssl-review.googlesource.com/2782
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
Add a dedicated error code to the queue for a handshake_failure alert in
response to ClientHello. This matches NSS's client behavior and gives a better
error on a (probable) failure to negotiate initial parameters.
BUG=https://crbug.com/446505
Change-Id: I34368712085a6cbf0031902daf2c00393783d96d
Reviewed-on: https://boringssl-review.googlesource.com/2751
Reviewed-by: Adam Langley <agl@google.com>
The |skip_message| variable was overly complex and, since we have at
least 32-bit ints, we know that a 24-bit value doesn't overflow an int.
Change-Id: I5c16fa979e1716f39cc47882c033bcf5bce3284c
Reviewed-on: https://boringssl-review.googlesource.com/2610
Reviewed-by: Adam Langley <agl@google.com>
RAND_pseudo_bytes just calls RAND_bytes now and only returns 0 or 1. Switch all
callers within the library call the new one and use the simpler failure check.
This fixes a few error checks that no longer work (< 0) and some missing ones.
Change-Id: Id51c79deec80075949f73fa1fbd7b76aac5570c6
Reviewed-on: https://boringssl-review.googlesource.com/2621
Reviewed-by: Adam Langley <agl@google.com>
No current use of ssl_cert_type passes a NULL EVP_PKEY, so it can be simplified
a little.
Change-Id: I2052cc3b6069cd30e4685ba8a6d0014016a4d712
Reviewed-on: https://boringssl-review.googlesource.com/2620
Reviewed-by: Adam Langley <agl@google.com>
Currently we don't express an opinion. Most sites aren't likely to have a
choice since it depends on what certificates they have available. But we may as
well order them.
Change-Id: I4fffa5e392f42e19823cb8faa2e9e15a6bb91086
Reviewed-on: https://boringssl-review.googlesource.com/2607
Reviewed-by: Adam Langley <agl@google.com>
Turns out the EVP_CIPH_FLAG_CUSTOM_CIPHER ciphers (i.e. legacy EVP_CIPHER
AES-GCM) have a completely different return value setup than the normal ones
which are the standard one/zero. (Except that they never return zero; see
TODO.)
Fix checks in ssl/ and remove remnants of EVP_CIPH_FLAG_CUSTOM_CIPHER in ssl/
as we're using EVP_AEAD now.
See CHANGES entry added in upstream's 3da0ca796cae6625bd26418afe0a1dc47bf5a77f.
Change-Id: Ia4d0ff59b03c35fab3a08141c60b9534cb7172e2
Reviewed-on: https://boringssl-review.googlesource.com/2606
Reviewed-by: Adam Langley <agl@google.com>
Those version checks are if renego tried to change the version, but at that
point we're out of the initial null cipher and should leave the version fixed.
(On the server end, the code in question was dead after the version negotiation
rewrite anyway.)
Change-Id: I3242ba11bc9981ccf7fdb867176d59846cc49dd9
Reviewed-on: https://boringssl-review.googlesource.com/2605
Reviewed-by: Adam Langley <agl@google.com>
This avoids needing a should_add_to_finished_hash boolean on do_write. The
logic in do_write was a little awkward because do_write would be called
multiple times if the write took several iterations. This also gets complex if
DTLS retransmits are involved. (At a glance, it's not obvious the
BIO_CTRL_DGRAM_MTU_EXCEEDED case actually works.)
Doing it as the handshake message is being prepared avoids this concern. It
also gives a natural point for the extended master secret logic which needs to
do work after the finished hash has been sampled.
As a bonus, we can remove s->d1->retransmitting which was only used to deal
with this issue.
Change-Id: Ifedf23ee4a6c5e08f960d296a6eb1f337a16dc7a
Reviewed-on: https://boringssl-review.googlesource.com/2604
Reviewed-by: Adam Langley <agl@google.com>
That comment is wrong as of TLS 1.2.
Change-Id: I900d5efc09d7468f2601d85f867833e43d046f6a
Reviewed-on: https://boringssl-review.googlesource.com/2603
Reviewed-by: Adam Langley <agl@google.com>
(Or should we just drop this? It only matters for servers trying to use client
auth.)
Change-Id: I50b6999375dc8f9246bf617f17929ae304503c57
Reviewed-on: https://boringssl-review.googlesource.com/2602
Reviewed-by: Adam Langley <agl@google.com>
Some of the messages did the computation manually which would bite us if we
tried to transplant them between DTLS and TLS. More importantly, it precludes
moving the handshake hash computation from ssl_do_write to
ssl_set_handshake_header.
Change-Id: I9d400deb0720e62cb1ab905242eb0679ad650a46
Reviewed-on: https://boringssl-review.googlesource.com/2600
Reviewed-by: Adam Langley <agl@google.com>
The frag_off/frag_len parameters are always zero, and the return value is never
used.
Change-Id: If7487b23c55f2a996e411b25b76a8e1651f25d8b
Reviewed-on: https://boringssl-review.googlesource.com/2601
Reviewed-by: Adam Langley <agl@google.com>
This change has no semantic effect (I hope!). It's just a reformatting
of a few files in ssl/. This is just a start – the other files in ssl/
should follow in the coming days.
Change-Id: I5eb3f4b18d0d46349d0f94d3fe5ab2003db5364e
David is heading out so I didn't want to block the previous batch of
changes for weeks. Thus I landed them as-is and this change tweaks a
couple of things that would normally have been addressed in code-review.
Change-Id: I2579dbc43d93fea34a52b4041f5511d70217aaf7
Ensure that both the client and the server emit a protocol_version alert
(except in SSLv3 where it doesn't exist) with a record-layer version which the
peer will recognize.
Change-Id: I31650a64fe9b027ff3d51e303711910a00b43d6f
This makes SSLv23_method go through DTLS_ANY_VERSION's version negotiation
logic. This allows us to get rid of duplicate ClientHello logic. For
compatibility, SSL_METHOD is now split into SSL_PROTOCOL_METHOD and a version.
The legacy version-locked methods set min_version and max_version based this
version field to emulate the original semantics.
As a bonus, we can now handle fragmented ClientHello versions now.
Because SSLv23_method is a silly name, deprecate that too and introduce
TLS_method.
Change-Id: I8b3df2b427ae34c44ecf972f466ad64dc3dbb171
Tested manually by replacing SSLv23_method() with TLSv1_2_method() in
bssl_shim. This is a large chunk of code which is not run in SSLv23_method(),
but it will be run after unification. It's split out separately to ease review.
Change-Id: I6bd241daca17aa0f9b3e36e51864a29755a41097
Match the DTLS code. Rather than sniffing the handshake state, use the
have_version bit.
Change-Id: I40e92f187647417c34b4cfdc3ad258f5562e781b
Reviewed-on: https://boringssl-review.googlesource.com/2588
Reviewed-by: Adam Langley <agl@google.com>
These tests use both APIs. This also modifies the inline version negotiation's
error codes (currently only used for DTLS) to align with SSLv23's error codes.
Note: the peer should send a protocol_version alert which is currently untested
because it's broken.
Upstream would send such an alert if TLS 1.0 was supported but not otherwise,
which is somewhat bizarre. We've actually regressed and never send the alert in
SSLv23. When version negotiation is unified, we'll get the alerts back.
Change-Id: I4c77bcef3a3cd54a039a642f189785cd34387410
Reviewed-on: https://boringssl-review.googlesource.com/2584
Reviewed-by: Adam Langley <agl@google.com>
Amend the version negotiation tests to test this new spelling of max_version.
min_version will be tested in a follow-up.
Change-Id: Ic4bfcd43bc4e5f951140966f64bb5fd3e2472b01
Reviewed-on: https://boringssl-review.googlesource.com/2583
Reviewed-by: Adam Langley <agl@google.com>
DTLS_method() can now negotiate versions without switching methods.
Change-Id: I0655b3221b6e7e4b3ed4acc45f1f41c594447021
Reviewed-on: https://boringssl-review.googlesource.com/2582
Reviewed-by: Adam Langley <agl@google.com>
SSL3_ENC_METHOD will remain version-specific while SSL_METHOD will become
protocol-specific. This finally removes all the version-specific portions of
SSL_METHOD but the version tag itself.
(SSL3_ENC_METHOD's version-specific bits themselves can probably be handled by
tracking a canonicalized protocol version. It would simplify version
comparisons anyway. The one catch is SSLv3 has a very different table. But
that's a cleanup for future. Then again, perhaps a version-specific method
table swap somewhere will be useful later for TLS 1.3.)
Much of this commit was generated with sed invocation:
s/method->ssl3_enc/enc_method/g
Change-Id: I2b192507876aadd4f9310240687e562e56e6c0b1
Reviewed-on: https://boringssl-review.googlesource.com/2581
Reviewed-by: Adam Langley <agl@google.com>
Now SSLv23 and DTLS_ANY_VERSION share version-related helper functions.
ssl3_get_method is temporary until the method switch is no longer necessary.
Put them all together so there's one place to refactor them when we add a new
version or implement min_version/max_version controls.
Change-Id: Ic28a145cad22db08a87fdb854480b22886c451c6
Reviewed-on: https://boringssl-review.googlesource.com/2580
Reviewed-by: Adam Langley <agl@google.com>
Missed this one. It requires that we be able to change an SSL_METHOD after the
after, which complicates compiling the version locking into min_version /
max_version configurations.
Change-Id: I24ba54b7939360bbfafe3feb355a65840bda7611
Reviewed-on: https://boringssl-review.googlesource.com/2579
Reviewed-by: Adam Langley <agl@google.com>
SSL_ST_BEFORE isn't a possible state anymore. It seems this state meant the
side wasn't known, back in the early SSLeay days. Now upstream guesses
(sometimes incorrectly with generic methods), and we don't initialize until
later. SSL_shutdown also doesn't bother to call ssl3_shutdown at all if the
side isn't initialized and SSL_ST_BEFORE isn't the uninitialized state, which
seems a much more sensible arrangement.
Likewise, because bare SSL_ST_BEFOREs no longer exist, SSL_in_init implies
SSL_in_before and there is no need to check both.
Change-Id: Ie680838b2f860b895073dabb4d759996e21c2824
Reviewed-on: https://boringssl-review.googlesource.com/2564
Reviewed-by: Adam Langley <agl@google.com>
These may as well be replaced with assertions. Get them out of the way of the
initialization.
Change-Id: Ie4ab8bdc018e4a1def7d3f6b3b172a77896bfc0a
Reviewed-on: https://boringssl-review.googlesource.com/2563
Reviewed-by: Adam Langley <agl@google.com>
They're always known now. Also fix the SSLv23_{client,server}_method
definitions still had their own macro invocations.
Change-Id: Ia13f29a27f2331d25a4051e83f2d5abc62fab981
Reviewed-on: https://boringssl-review.googlesource.com/2562
Reviewed-by: Adam Langley <agl@google.com>
There's an undefined one not used anywhere. The others ought to be const. Also
move the forward declaration to ssl.h so we don't have to use the struct name.
Change-Id: I76684cf65255535c677ec19154cac74317c289ba
Reviewed-on: https://boringssl-review.googlesource.com/2561
Reviewed-by: Adam Langley <agl@google.com>
else block got lost in a rewrite of this code.
Change-Id: I51f1655474ec8bbd4eccb4297124e8584329444e
Reviewed-on: https://boringssl-review.googlesource.com/2560
Reviewed-by: Adam Langley <agl@google.com>
The client_version needs to be preserved, both for the RSA key exchange and
(when this codepath is used for TLS) for the SChannel renego workaround. Fix
the tests to enforce this so the cipher suite version tests catch this.
Change-Id: I0c42dc3ec4830f3724026b400e5066e7a7f1ee97
Reviewed-on: https://boringssl-review.googlesource.com/2551
Reviewed-by: Adam Langley <agl@google.com>
There's no need to make that conditional.
Change-Id: Idac1aba42b22e3fe8e7731ae4ecb5ebc4183336c
Reviewed-on: https://boringssl-review.googlesource.com/2550
Reviewed-by: Adam Langley <agl@google.com>
Comparing data is a much easier idiom than CBS_skip + a CBS_len check.
Change-Id: I3efe925734c76f3494cad682445291ae83750a7e
Reviewed-on: https://boringssl-review.googlesource.com/2500
Reviewed-by: Adam Langley <agl@google.com>
The record-layer version of the ServerHello should match the final version. The
record-layer version of the ClientHello should be the advertised version, but
clamped at TLS 1.0. This is to ensure future rewrites do not regress this.
Change-Id: I96f1f0674944997ff38b562453a322ce61652635
Reviewed-on: https://boringssl-review.googlesource.com/2540
Reviewed-by: Adam Langley <agl@google.com>
Bruce Dawson pointed out that the shadowing of |ret| in |s3_srvr.c|
looked dodgy. It was actually deliberate (we don't want to reset the
default value of the function's |ret| variable with a successful return
from the callback) but it does look dodgy.
This change adds -Wshadow to ban variable shadowing and fixes all
current instances.
Change-Id: I1268f88b9f26245c7d16d6ead5bb9014ea471c01
Reviewed-on: https://boringssl-review.googlesource.com/2520
Reviewed-by: Adam Langley <agl@google.com>
(Imported from upstream's 7a04b854d655785798d471df25ffd5036f3cc46b.)
This does not affect BoringSSL as ssl3_get_client_hello advances to yet another
state immediately after reading the message. But the state advance is correct.
It matches the normal exit for this function.
Change-Id: I8a664f2ad5f80beacbaf3e17a7786a5c9e8ef30e
Reviewed-on: https://boringssl-review.googlesource.com/2480
Reviewed-by: Piotr Sikora <piotr@cloudflare.com>
Reviewed-by: Adam Langley <agl@google.com>
(Imported from upstream's 4b87706d20f0a2fdf2e8f1b90256e141c487ef47 and
eceef8fb865eb5de329b27ea472d4fdea4c290fe.)
Dead code.
Change-Id: I58120c3a9c42cb9db27f404774778222c3bb642a
Reviewed-on: https://boringssl-review.googlesource.com/2479
Reviewed-by: Adam Langley <agl@google.com>
PR#1767
(Imported from upstream's fe78f08d1541211566a5656395186bfbdc61b6f8)
Not sure this is reachable (upstream's PR references custom engines), but
better be tidy. Note this is slightly different from upstream's: EVP_Cipher is
documented to return -1 on failure, not 0.
Change-Id: I836f12b73c6912a8ae8cbd37cfd3d33466acbc9e
Reviewed-on: https://boringssl-review.googlesource.com/2478
Reviewed-by: Adam Langley <agl@google.com>
PR#3613
(Imported from upstream's fc3968a25ce0c16cab8730ec0d68a59856158029)
We don't care about GOST, but removing redundant code is reasonable. Also
switch that CRYPTO_add to EVP_PKEY_dup. Missed a spot.
Change-Id: I768ec546d987fb3d8bc3decf7ebf1a5590fbb6c2
Reviewed-on: https://boringssl-review.googlesource.com/2477
Reviewed-by: Adam Langley <agl@google.com>
Some code predated the RFCs themselves, but the RFCs now exist. Also remove
now obsolete comments and some unused #defines.
See upstream's cffeacd91e70712c99c431bf32a655fa1b561482. (Though this predates
it; I just remembered I never uploaded it.)
Change-Id: I5e56f0ab6b7f558820f72e84dfdbc71a8c23cb91
Reviewed-on: https://boringssl-review.googlesource.com/2475
Reviewed-by: Adam Langley <agl@google.com>
The ClientHello record is padded to 1024 bytes when
fastradio_padding is enabled. As a result, the 3G cellular radio
is fast forwarded to DCH (high data rate) state. This mechanism
leads to a substantial redunction in terms of TLS handshake
latency, and benefits mobile apps that are running on top of TLS.
Change-Id: I3d55197b6d601761c94c0f22871774b5a3dad614
MSVC doesn't like it when you compare the two.
Change-Id: I03c5ff2e2668ac2e536de8278e3a7c98a3dfd117
Reviewed-on: https://boringssl-review.googlesource.com/2460
Reviewed-by: Adam Langley <agl@google.com>
It just inserts extra flushes everywhere and isn't used.
Change-Id: I082e4bada405611f4986ba852dd5575265854036
Reviewed-on: https://boringssl-review.googlesource.com/2456
Reviewed-by: Adam Langley <agl@google.com>
Use it in ssl3_cert_verify_hash so signing a pre-TLS-1.2 handshake hash can go
through RSA_sign and be intercepted via RSA_METHOD appropriately. This avoids
Windows needing to intercept sign_raw. (CAPI keys cannot provide sign_raw,
unless the input size happens to be that of NID_md5_sha1.)
Also use it in processing ServerKeyExchange to avoid special-casing RSA.
BUG=crbug.com/437023
Change-Id: Ia07433f468b75fdf7bfc8fa90c9751639b2478e6
Reviewed-on: https://boringssl-review.googlesource.com/2420
Reviewed-by: David Benjamin <davidben@google.com>
Don't link with dl, except on Linux where we have malloc tests.
Change-Id: I7b23acc854172e64628a55acecfaa9a661f74f77
Reviewed-on: https://boringssl-review.googlesource.com/2453
Reviewed-by: Adam Langley <agl@google.com>
The comment has it right, but the rewritten code was wrong.
Change-Id: I450193c39fb62eae32aae090a3834dd83db53421
Reviewed-on: https://boringssl-review.googlesource.com/2444
Reviewed-by: Adam Langley <agl@google.com>
Replace the comment with a clearer one and reimplement it much more tidily. The
mask thing was more complicated than was needed.
This slightly changes behavior on the DTLS_ANY_VERSION side in that, if only
one method is enabled, we no longer short-circuit to the version-locked method
early. This "optimization" seems unnecessary.
Change-Id: I571c8b60ed16bd4357c67d65df0dd1ef9cc5eb57
Reviewed-on: https://boringssl-review.googlesource.com/2451
Reviewed-by: Adam Langley <agl@google.com>
It should be set correctly prior to entering the handshake. Don't mask bugs by
assigning it.
Change-Id: Ib9bca8fad68916b3b242aad8819e3760e59e777a
Reviewed-on: https://boringssl-review.googlesource.com/2443
Reviewed-by: Adam Langley <agl@google.com>
first_packet is a temporary connection-global flag set for the duration of some
call and then queried from other code. This kind of logic is too difficult to
reason through. It also incorrectly treats renegotiate ClientHellos as
pre-version-negotiation records. This eliminates the need to query
enc_write_ctx (which wasn't EVP_AEAD-aware anyway).
Instead, take a leaf from Go TLS's book and add a have_version bit. This is
placed on s->s3 as it is connection state; s->s3 automatically gets reset on
SSL_clear while s doesn't.
This new flag will also be used to determine whether to do the V2ClientHello
sniff when the version-locked methods merge into SSLv23_method. It will also
replace needing to condition s->method against a dummy DTLS_ANY_VERSION value
to determine whether DTLS version negotiation has happened yet.
Change-Id: I5c8bc6258b182ba4ab175a48a84eab6d3a001333
Reviewed-on: https://boringssl-review.googlesource.com/2442
Reviewed-by: Adam Langley <agl@google.com>
Supporting both schemes seems pointless. Now that s->server and s->state are
set appropriately late and get_ssl_method is gone, the only difference is that
the client/server ones have non-functional ssl_accept or ssl_connect hooks. We
can't lose the generic ones, so let's unify on that.
Note: this means a static linker will no longer drop the client or server
handshake code if unused by a consumer linking statically. However, Chromium
needs the server half anyway for DTLS and WebRTC, so that's probably a lost
cause. Android also exposes server APIs.
Change-Id: I290f5fb4ed558f59fadb5d1f84e9d9c405004c23
Reviewed-on: https://boringssl-review.googlesource.com/2440
Reviewed-by: Adam Langley <agl@google.com>
If SSL_clear is called before SSL_set_{connect,accept}_state (as SSL_new does
internally), s->state will get set prematurely. Likewise, s->server is set
based on the method's ssl_accept hook, but client SSL's may be initialized from
a generic SSL_METHOD too.
Since we can't easily get rid of the generic SSL_METHODs, defer s->state and
s->server initialization until the side is known.
Change-Id: I0972e17083df22a3c09f6f087011b54c699a22e7
Reviewed-on: https://boringssl-review.googlesource.com/2439
Reviewed-by: Adam Langley <agl@google.com>
It's unused. Also per the previous commit message, it historically had a bug
anyway.
Change-Id: I5868641e7938ddebbc0ffd72d218c81cd17c7739
Reviewed-on: https://boringssl-review.googlesource.com/2437
Reviewed-by: Adam Langley <agl@google.com>
If the state is SSL_ST_BEFORE, the SSL* was just initialized. Otherwise, we
don't want to call SSL_clear. The one case I found where we do is if a
handshake message is received and someone sets
SSL3_FLAGS_NO_RENEGOTIATE_CIPHERS. This is apparently intended for external
consumers to set, but I see no code in Google that does.
Which is fortunate because it'll trigger SSL_clear. This retains the BIOs but
drops all connection state, including the record. If the client just initiated
renego, that's the ClientHello that's lost. The connection then hangs: the now
reset SSL* wants a ClientHello (under the null cipher because that too's been
dropped) while the peer wants an encrypted ServerHello.
Change-Id: Iddb3e0bb86d39d98155b060f9273a0856f2d1409
Reviewed-on: https://boringssl-review.googlesource.com/2436
Reviewed-by: Adam Langley <agl@google.com>
SSL_clear sets s->state and dtls1_clear sets cookie_len on the server. Setting
cookie_len on the server seems to serve no purpose but to let the callback know
how large the buffer is. This can be done just before calling the callback.
It also avoids a bug where the cookie check can be bypassed, should the server
not specify an app_verify_cookie_cb, by supplying a cookie of all zeros of the
maximum size. (Zero is fine because an empty cookie is rejected.)
The goal here is to avoid needing the SSL_clear calls in the handshake
functions. They are currently needed to fix the cookie_len setting when using
the generic method. (They get set wrong and then flipped back.)
Change-Id: I5095891bc0f7df62d83a9c84312fcf0b84826faa
Reviewed-on: https://boringssl-review.googlesource.com/2435
Reviewed-by: Adam Langley <agl@google.com>
s->server's value isn't final until SSL_connect or SSL_accept is called when
using the generic SSLv23_method or DTLS_method rather than the version-locked
ones. This makes the tests pass if bssl_shim uses those methods.
It would be nicer if the generic methods were gone and an SSL* could know from
creation which half it's destined for. Unfortunately, there's a lot of code
that uses those generic methods, so we probably can't get rid of them. If they
have to stay, it seems better to standardize on only having those, rather than
support both, even if standardizing on the side-specific ones would be
preferable.
Change-Id: I40e65a8842cd6706da92263a263f664336a7f3b3
Reviewed-on: https://boringssl-review.googlesource.com/2434
Reviewed-by: Adam Langley <agl@google.com>
SSL_ST_BEFORE is never standalone. As of upstream's
413c4f45ed0508d2242638696b7665f499d68265, SSL_ST_BEFORE is only ever set paired
with SSL_ST_ACCEPT or SSL_ST_CONNECT.
Conversely, SSL_ST_OK is never paired with SSL_ST_ACCEPT or SSL_ST_CONNECT. As
far as I can tell, this combination has never been possible.
Change-Id: Ifbc8f147be821026cf59f3d5038f0dbad3b0a1d2
Reviewed-on: https://boringssl-review.googlesource.com/2433
Reviewed-by: Adam Langley <agl@google.com>
It should already be assigned, as of upstream's
b31b04d951e9b65bde29657e1ae057b76f0f0a73. I believe these assignments are part
of the reason it used to appear to work. Replace them with assertions. So the
assertions are actually valid, check in SSL_connect / SSL_accept that they are
never called if the socket had been placed in the opposite state. (Or we'd be
in another place where it would have appeared to work with the handshake
functions fixing things afterwards.)
Now the only places handshake_func is set are in SSL_set_{connect,accept}_state
and the method switches.
Change-Id: Ib249212bf4aa889b94c35965a62ca06bdbcf52e1
Reviewed-on: https://boringssl-review.googlesource.com/2432
Reviewed-by: Adam Langley <agl@google.com>
This comment is no longer true. It dates from OpenSSL's initial commit, but
stopped being true in upstream's 413c4f45ed0508d2242638696b7665f499d68265.
Change-Id: I47377d992a00e3d57c795fef893e19e109dd6945
Reviewed-on: https://boringssl-review.googlesource.com/2431
Reviewed-by: Adam Langley <agl@google.com>
We intend to deprecate the version-locked methods and unify them. Don't expose
that there's a method swap. (The existing version-locked methods will merely be
a shorthand for configuring minimum/maximum versions.)
There is one consumer of SSL_get_ssl_method in internal code, but it's just
some logging in test-only code. All it's doing is getting the version as a
string which should be SSL_get_version instead.
While here, also remove dead ssl_bad_method function. Also the bogus
ssl_crock_st forward-declaration. The forward declaration in base.h should be
perfectly sufficient.
Change-Id: I50480808f51022e05b078a285f58ec85d5ad7c8e
Reviewed-on: https://boringssl-review.googlesource.com/2408
Reviewed-by: Adam Langley <agl@google.com>
When not offering to resume a session, the client populates s->session with a
fresh SSL_SESSION before the ServerHello is processed and, in DTLS_ANY_VERSION,
before the version is even determined. Don't create a fresh SSL_SESSION until
we know we are doing a full handshake.
This brings ssl3_send_client_hello closer to ssl23_client_hello in behavior. It
also fixes ssl_version in the client in DTLS_ANY_VERSION.
SSLv23_client_method is largely unchanged. If no session is offered, s->session
continues to be NULL until the ServerHello is received. The one difference is
that s->session isn't populated until the entire ServerHello is received,
rather than just the first half, in the case of a fragmented ServerHello. Apart
from info_callback, no external hooks get called between those points, so this
shouldn't expose new missing NULL checks.
The other client methods change significantly to match SSLv23_client_method's
behavior. For TLS, any exposed missing NULL checks are also in
SSLv23_client_method (and version-specific methods are already weird), so that
should be safe. For DTLS, I've verified that accesses in d1_*.c either handle
NULL or are after the ServerHello.
Change-Id: Idcae6bd242480e28a57dbba76ce67f1ac1ae1d1d
Reviewed-on: https://boringssl-review.googlesource.com/2404
Reviewed-by: Adam Langley <agl@google.com>
This fixes bugs that kept the tests from working:
- Resolve DTLS version and cookie before the session.
- In DTLS_ANY_VERSION, ServerHello should be read with first_packet = 1. This
is a regression from f2fedefdca. We'll want to
do the same for TLS, but first let's change this to a boolean has_version in a
follow-up.
Things not yet fixed:
- DTLS code is not EVP_AEAD-aware. Those ciphers are disabled for now.
- On the client, DTLS_ANY_VERSION creates SSL_SESSIONs with the wrong
ssl_version. The tests pass because we no longer enforce the match as of
e37216f56009fbf48c3a1e733b7a546ca6dfc2af. (In fact, we've gone from the server
ignoring ssl_version and client enforcing to the client mostly ignoring
ssl_version and the server enforcing.)
- ssl3_send_client_hello's ssl_version check checks for equality against
s->version rather than >.
Change-Id: I5a0dde221b2009413df9b9443882b9bf3b29519c
Reviewed-on: https://boringssl-review.googlesource.com/2403
Reviewed-by: Adam Langley <agl@google.com>
This is a bit of cleanup that probably should have been done at the same time
as 30ddb434bf.
For now, version negotiation is implemented with a method swap. It also
performs this swap on SSL_set_session, but this was neutered in
30ddb434bf. Rather than hackishly neuter it,
remove it outright. In addition, remove SSL_set_ssl_method. Now all method
swaps are internal: SSLv23_method switch to a version-specific method and
SSL_clear undoing it.
Note that this does change behavior: if an SSL* is created with one
version-specific method and we SSL_set_session to a session from a /different/
version, we would switch to the /other/ version-specific method. This is
extremely confusing, so it's unlikely anyone was actually expecting it.
Version-specific methods in general don't work well.
Change-Id: I72a5c1f321ca9aeb1b52ebe0317072950ba25092
Reviewed-on: https://boringssl-review.googlesource.com/2390
Reviewed-by: Adam Langley <agl@google.com>
We forgot to add those when we implemented the features. (Also relevant because
they will provide test coverage later for configuring features when using the
generic method tables rather than *_client_method.)
Change-Id: Ie08b27de893095e01a05a7084775676616459807
Reviewed-on: https://boringssl-review.googlesource.com/2410
Reviewed-by: Adam Langley <agl@google.com>
Although the comment suggests this was added with an s->session check to
account for SSL_set_session switching methods (which we will remove in the next
commit) and to account for SSLv23_method switching methods (which we hope to
remove after a long tower of cleanup), the current codepath never runs and
can't work:
If it is called prior to handshaking or setting a session, no method switch has
happened so that codepath is dead. If it is called after setting a session, the
s->session check will keep it from running. If it is called after a handshake,
we will have established a session so that check will again keep it from
running. (Finally, if it is called during the handshake, the in_handshake check
will stop; that there is an SSL_clear call in the handshake state machine at
all is a bug that will be addressed once more things are disentangled. See
upstream's 979689aa5cfa100ccbc1f25064e9398be4b7b05c.)
Were that code to ever run, the SSL* would be in an inconsistent state. It
switches the method, but not the handshake_func. The handshake_func isn't
switched to NULL, so that will keep the SSL_connect and SSL_accept code from fixing it.
It seems the intent was that the caller would always call
SSL_set_{connect,accept}_state to fix this. But as of upstream's
b31b04d951e9b65bde29657e1ae057b76f0f0a73, this is not necessary and indeed
isn't called by a lot of consumer code.
Change-Id: I710652b1d565b77bc26f913c2066ce749a9025c9
Reviewed-on: https://boringssl-review.googlesource.com/2430
Reviewed-by: Adam Langley <agl@google.com>
The data is owned by the SSL_SESSION, so the caller should not modify it. This
will require changes in Chromium, but they should be trivial.
Change-Id: I314718530c7d810f7c7b8852339b782b4c2dace1
Reviewed-on: https://boringssl-review.googlesource.com/2409
Reviewed-by: Adam Langley <agl@google.com>
This is only used for EAP-FAST which we apparently don't need to support.
Remove it outright. We broke it in 9eaeef81fa by
failing to account for session misses.
If this changes and we need it later, we can resurrect it. Preferably
implemented differently: the current implementation is bolted badly onto the
handshake. Ideally use the supplied callbacks to fabricate an appropriate
SSL_SESSION and resume that with as much of the normal session ticket flow as
possible.
The one difference is that EAP-FAST seems to require the probing mechanism for
session tickets rather than the sane session ID echoing version. We can
reimplement that by asking the record layer to probe ahead for one byte.
Change-Id: I38304953cc36b2020611556a91e8ac091691edac
Reviewed-on: https://boringssl-review.googlesource.com/2360
Reviewed-by: Adam Langley <agl@google.com>
This implements session IDs in client and server in runner.go.
Change-Id: I26655f996b7b44c7eb56340ef6a415d3f2ac3503
Reviewed-on: https://boringssl-review.googlesource.com/2350
Reviewed-by: Adam Langley <agl@google.com>
The ex_data index may fail to be allocated. Also don't leave a dangling pointer
in handshake_dgst if EVP_DigestInit_ex fails and check a few more init function
failures.
Change-Id: I2e99a89b2171c9d73ccc925a2f35651af34ac5fb
Reviewed-on: https://boringssl-review.googlesource.com/2342
Reviewed-by: Adam Langley <agl@google.com>
This commit fixes a number of crashes caused by malloc failures. They
were found using the -malloc-test=0 option to runner.go which runs tests
many times, causing a different allocation call to fail in each case.
(This test only works on Linux and only looks for crashes caused by
allocation failures, not memory leaks or other errors.)
This is not the complete set of crashes! More can be found by collecting
core dumps from running with -malloc-test=0.
Change-Id: Ia61d19f51e373bccb7bc604642c51e043a74bd83
Reviewed-on: https://boringssl-review.googlesource.com/2320
Reviewed-by: Adam Langley <agl@google.com>
tls1_process_sigalgs now only determines the intersection between the peer
algorithms and those configured locally. That list is queried later to
determine the hash algorithm to use when signing CertificateVerify or
ServerKeyExchange.
This is needed to support client auth on Windows where smartcards or CAPI may
not support all hash functions.
As a bonus, this does away with more connection-global state. This avoids the
current situation where digests are chosen before keys are known (for
CertificateVerify) or for slots that don't exist.
Change-Id: Iec3619a103d691291d8ebe08ef77d574f2faf0e8
Reviewed-on: https://boringssl-review.googlesource.com/2280
Reviewed-by: Adam Langley <agl@google.com>
CERT_PKEY_SIGN isn't meaningful since, without strict mode, we always fall back
to SHA-1 anyway. So the digest is never NULL when CERT_PKEY_SIGN is computed.
The entire valid_flags is now back to it's pre-1.0.2 check of seeing if the
certificate and key are configured.
This finally removes the sensitivity between valid_flags and selecting the
digest, so we can defer choosing the digest all we like.
Change-Id: I9f9952498f512d7f0cc799497f7c5b52145a48af
Reviewed-on: https://boringssl-review.googlesource.com/2288
Reviewed-by: Adam Langley <agl@google.com>
It doesn't depend on the cipher now that export ciphers are gone. It need only
be called once. Also remove the valid bit; nothing ever reads it. Its output is
also only used within a function, so make mask_k and mask_a local variables.
So all the configuration-based checks are in one place, change the input
parameter from CERT to SSL and move the PSK and ECDHE checks to the mask
computation. This avoids having to evaluate the temporary EC key for each
cipher.
The remaining uses are on the client which uses them differently (disabled
features rather than enabled ones). Those too may as well be local variables,
so leave a TODO.
Change-Id: Ibcb574341795d4016ea749f0290a793eed798874
Reviewed-on: https://boringssl-review.googlesource.com/2287
Reviewed-by: Adam Langley <agl@google.com>
Many are now unused. Only two are currently considered in cipher selection:
CERT_PKEY_VALID and CERT_PKEY_SIGN. (As per previous commits, this is either
bizarre due to limited slots or redundant with ssl_early_callback_ctx. We can
probably prune this too.)
This also fixes a bug where DTLS 1.0 went through a TLS 1.2 codepath. As the
DTLS code is currently arranged, all version comparisons must be done via
macros like SSL_USE_SIGALGS. (Probably we should add functions to map from DTLS
to TLS versions and slowly move the library to using the TLS version as
in-memory representation.)
Change-Id: I89bcf5b7b9ea5cdecf54f4445156586377328fe0
Reviewed-on: https://boringssl-review.googlesource.com/2286
Reviewed-by: Adam Langley <agl@google.com>
It's new in OpenSSL 1.0.2 so it's never set by existing code. This removes gobs
and gobs of complexity from tls1_check_chain. It only checks the local
certificate, not the peer certificate. The uses appear to be:
- Sanity-check configuration. Not worth the complexity.
- Guide in selecting ciphers based on ClientHello parameters and which
certificates in the CERT_PKEY are compatible. This isn't very useful one its
own since the CERT_PKEY array only stores one slot per type (e.g. you cannot
configure RSA/SHA-1 and RSA/SHA-256).
- For the (currently removed) SSL_check_chain to return more information based
on ClientHello parameters and guide selecting a certificate. This is
potentially useful but, as noted in the commit which removed it, redundant
with ssl_early_callback_ctx.
This CL is largely mechanical removing of dead codepaths. The follow-up will
clean up the now unnecessary parts of this function.
Change-Id: I2ebfa17e4f73e59aa1ee9e4ae7f615af2c6cf590
Reviewed-on: https://boringssl-review.googlesource.com/2285
Reviewed-by: Adam Langley <agl@google.com>
Get rid of now dead codepaths.
Change-Id: I3b5d49097cba70c5698a230cc6c1d79bdd0f0880
Reviewed-on: https://boringssl-review.googlesource.com/2284
Reviewed-by: Adam Langley <agl@google.com>
Both of these are newly-exported in OpenSSL 1.0.2, so they cannot be used by
current consumers.
This was added in upstream's 18d7158809c9722f4c6d2a8af7513577274f9b56 to
support custom selection of certificates. The intent seems to be that you
listen to cert_cb and use SSL_check_chain to lean on OpenSSL to process
signature algorithms list for you.
Unfortunately, the implementation is slightly suspect: it uses the same
function as the codepath which mutates and refers to the CERT_PKEY of the
matching type. Some access was guarded by check_flags, but this is too
complex. Part of it is also because the matching digest is selected early and
we intend to connect this to EVP_PKEY_supports_digest so it is no longer a
property of just the key type.
Let's remove the hook for now, to unblock removing a lot of complexity. After
cleaning up this area, a function like this could be cleaner to support, but
we already have a version of this: select_certificate_cb and
ssl_early_callback_ctx.
Change-Id: I3add425b3996e5e32d4a88e14cc607b4fdaa5aec
Reviewed-on: https://boringssl-review.googlesource.com/2283
Reviewed-by: Adam Langley <agl@google.com>
This is maintained just to distinguish whether the digest was negotiated or we
simply fell back to assuming SHA-1 support. No code is sensitive to this flag
and it adds complexity because it is set at a different time, for now, from the
rest of valid_flags.
The flag is new in OpenSSL 1.0.2, so nothing external could be sensitive to it.
Change-Id: I9304e358d56f44d912d78beabf14316d456bf389
Reviewed-on: https://boringssl-review.googlesource.com/2282
Reviewed-by: Adam Langley <agl@google.com>
This is new in OpenSSL 1.0.2 so it isn't used anywhere. Cuts down slightly on
connection-global state associated with signature algorithm processing.
Repurposing the digest field to mean both "the digest we choose to sign with
this key" and "the digest the last signature we saw happened to use" is
confusing.
Change-Id: Iec4d5078c33e271c8c7b0ab221c356ee8480b89d
Reviewed-on: https://boringssl-review.googlesource.com/2281
Reviewed-by: Adam Langley <agl@google.com>
Just the negotiation portion as everything else is external. This feature is
used in WebRTC.
Change-Id: Iccc3983ea99e7d054b59010182f9a56a8099e116
Reviewed-on: https://boringssl-review.googlesource.com/2310
Reviewed-by: Adam Langley <agl@google.com>
Prior to this change, BoringSSL maintained a 2-byte buffer for alerts,
and would support reassembly of fragmented alerts.
NSS does not support fragmented alerts, nor would any reasonable
implementation produce them. Remove fragmented alert handling and
produce an error if a fragmented alert has ever been encountered.
Change-Id: I31530ac372e8a90b47cf89404630c1c207cfb048
Reviewed-on: https://boringssl-review.googlesource.com/2125
Reviewed-by: Adam Langley <agl@google.com>
All of NSS, upstream OpenSSL, SChannel, and Secure Transport require, on the
client, that the ServerHello version match the session's version on resumption.
OpenSSL's current behavior is incompatible with all of these. Fall back to a
full handshake on the server instead of mismatch.
Add a comment on the client for why we are, as of
30ddb434bf, not currently enforcing the same in
the client.
Change-Id: I60aec972d81368c4ec30e2fd515dabd69401d175
Reviewed-on: https://boringssl-review.googlesource.com/2244
Reviewed-by: Adam Langley <agl@google.com>
Clients all consistently reject mismatches. If a different version was
negotiated, a server should ignore the resumption. This doesn't actually affect
current tests. We really want to be making this change in BoringSSL (and then
upstream), but get the Go half into shape first.
Change-Id: Ieee7e141331d9e08573592e661889bd756dccfa9
Reviewed-on: https://boringssl-review.googlesource.com/2243
Reviewed-by: Adam Langley <agl@google.com>
The limit increased from 32 to 255 between DTLS 1.0 and DTLS 1.2.
Change-Id: I329a59f9ba2bccc70282e2b47679c57b67e5ed43
Reviewed-on: https://boringssl-review.googlesource.com/2242
Reviewed-by: Adam Langley <agl@google.com>
These'll get removed once most of renego support is gone, but this is to prove
removing the warning alert from the previous commit still prevents legacy
renegotiations.
Change-Id: I7d9d95e1d4c5d23d3b6d170938a5499a65f2d5ea
Reviewed-on: https://boringssl-review.googlesource.com/2236
Reviewed-by: Adam Langley <agl@google.com>
Ensure that the client rejects it with UNEXPECTED_MESSAGE, not by attempting to
decode it.
Change-Id: Ifc5613cf1152e0f7dcbee73e05df1ef367dfbfd5
Reviewed-on: https://boringssl-review.googlesource.com/2232
Reviewed-by: Adam Langley <agl@google.com>
There's not much point in retaining the identity hint in the SSL_SESSION. This
avoids the complexity around setting psk_identity hint on either the SSL or the
SSL_SESSION. Introduce a peer_psk_identity_hint for the client to store the one
received from the server.
This changes the semantics of SSL_get_psk_identity_hint; it now only returns
the value configured for the server. The client learns the hint through the
callback. This is compatible with the one use of this API in conscrypt (it
pulls the hint back out to pass to a callback).
Change-Id: I6d9131636b47f13ac5800b4451436a057021054a
Reviewed-on: https://boringssl-review.googlesource.com/2213
Reviewed-by: Adam Langley <agl@google.com>
This is an experimental flag that dates back to SSLeay 0.8.1b or earlier. It's
never set internally and never set in consumers.
Change-Id: I922583635c9f3d8d93f08f1707531ad22a26ae6a
Reviewed-on: https://boringssl-review.googlesource.com/2214
Reviewed-by: Adam Langley <agl@google.com>
At the record layer, DTLS maintains a window of seen sequence numbers to detect
replays. Add tests to cover that case. Test both repeated sequence numbers
within the window and sequence numbers past the window's left edge. Also test
receiving sequence numbers far past the window's right edge.
Change-Id: If6a7a24869db37fdd8fb3c4b3521b730e31f8f86
Reviewed-on: https://boringssl-review.googlesource.com/2221
Reviewed-by: Adam Langley <agl@google.com>
If psk_len were 0, it would already have been an error earlier. The PSK cipher
suites don't lose the other_secret || psk construction if the PSK happens to be
empty.
Change-Id: I1917236720d0862658562bc8f014cb827ee9aed5
Reviewed-on: https://boringssl-review.googlesource.com/2233
Reviewed-by: Adam Langley <agl@google.com>
Server-side support was removed in 77a942b7fe,
but client-side support was retained as it appeared NSS supported this.
However, this is not the case: ssl3_HandleServerKeyExchange only allows a
ServerKeyExchange message if hs.ws is in an appropriate state.
ssl3_AuthCertificate only sets it to allow ServerKeyExchange if it is a key
exchange that normally uses it or if is_limited is set. is_limited is only set
for the export cipher suites.
Thus we can safely remove this without waiting on gathering UMA data.
BUG=chromium:400587
Change-Id: I9aefb742dbb2d99c13340ab48017e1ceee04bc2f
Reviewed-on: https://boringssl-review.googlesource.com/2230
Reviewed-by: Adam Langley <agl@google.com>
This was added in upstream's 82e610e2cfbbb5fd29c09785b6909a91e606f347. The
commit message cites draft-ietf-tls-renegotiation which was on
draft-ietf-tls-renegotiation-01 at the time. The text in question (6.2 Server
Considerations) is no longer in RFC 5746. The RFC now recommends terminating
the connection which is much simpler.
It also was wrong anyway as it checked s->ctx->options instead of s->options
for SSL_OP_ALLOW_UNSAFE_LEGACY_RENEGOTIATION.
Removing that block will result in the connection being terminated in
ssl_scan_clienthello_tlsext.
Change-Id: Ie222c78babd3654c5023ad07ac0d8e0adde68698
Reviewed-on: https://boringssl-review.googlesource.com/2235
Reviewed-by: Adam Langley <agl@google.com>
Parameters like these should not change between 32-bit and 64-bit. 64 is also
the value recommended in RFC 6347, section 4.1.2.6. Document those fields while
I'm here.
Change-Id: I8481ee0765ff3d261a96a2e1a53b6ad6695b2d42
Reviewed-on: https://boringssl-review.googlesource.com/2222
Reviewed-by: Adam Langley <agl@google.com>
This was added in http://rt.openssl.org/Ticket/Display.html?id=2033 to support
a mode where a DTLS socket would statelessly perform the ClientHello /
HelloVerifyRequest portion of the handshake, to be handed off to a socket
specific to this peer address.
This is not used by WebRTC or other current consumers. If we need to support
something like this, it would be cleaner to do the listen portion (cookieless
ClientHello + HelloVerifyRequest) externally and then spin up an SSL instance
on receipt of a cookied ClientHello. This would require a slightly more complex
BIO to replay the second ClientHello but would avoid peppering the DTLS
handshake state with a special short-circuiting mode.
Change-Id: I7a413932edfb62f8b9368912a9a0621d4155f1aa
Reviewed-on: https://boringssl-review.googlesource.com/2220
Reviewed-by: Adam Langley <agl@google.com>
(Imported form upstream's 455b65dfab0de51c9f67b3c909311770f2b3f801 and
0d6a11a91f4de238ce533c40bd9507fe5d95f288)
Change-Id: Ia195c7fe753cfa3a7f8c91d2d7b2cd40a547be43
Imported from upstream's 9bed73adaa6f834177f29e478d9a2247a6577c04.
Upstream's commit appears to have been based on BoringSSL's commits to
improve the constant-time behaviour of RSA padding checks and thus I've
not tried to import those bits of the change.
Change-Id: I0ea5775b0f1e18741bbbc9f792a6af0d3d2a4caf
Pull constant-time methods out to a separate header, add tests.
(Imported from upstream's 9a9b0c0401cae443f115ff19921d347b20aa396b and
27739e92659d38cdefa21e51b7f52b81a7ac3388)
Change-Id: Id570f5c531aca791112929e6258989f43c8a78d7
State hanging off the SSL gets freed in two places.
Change-Id: I41a8d2a7cab35f0098396006e1f6380038ec471a
Reviewed-on: https://boringssl-review.googlesource.com/2212
Reviewed-by: Adam Langley <agl@google.com>
Also add a few other assertions.
Change-Id: Iae0c65802f4d05c7585e2790be5295f478e1f614
Reviewed-on: https://boringssl-review.googlesource.com/2210
Reviewed-by: Adam Langley <agl@google.com>
s->s3 is never NULL if an ssl3_* function is called, and we'll crash later
anyway. (This also makes scan-build stop believing it can be NULL.)
Change-Id: Ibf8433bd4d945f9bf5416d72946102a9e50d2787
Reviewed-on: https://boringssl-review.googlesource.com/2206
Reviewed-by: Adam Langley <agl@google.com>
Check the return value while we're here. This avoids some arithmetic and
appease scan-build's dead assignment flagger.
Change-Id: If3615076e091eb44b9e3e9d50cd64f80e645337e
Reviewed-on: https://boringssl-review.googlesource.com/2204
Reviewed-by: Adam Langley <agl@google.com>
Without SSL_MODE_AUTO_RETRY, even blocking mode will return
SSL_ERROR_WANT_{READ|WRITE} in the event of a renegotiation.
The comments in the code speak only of "nasty problems" unless this is
done. The original commit that added SSL_MODE_AUTO_RETRY
(54f10e6adce56eb2e59936e32216162aadc5d050) gives a little more detail:
The [...] behaviour is needed by applications such as s_client and
s_server that use select() to determine when to use SSL_read.
Without the -nbio flag, s_client will use select() to find when the
socket is readable and then call SSL_read with a blocking socket.
However, this will still block in the event of an incomplete record, so
the delay is already unbounded. This it's very unclear what the point of
this behaviour ever was.
Perhaps if the read and write paths were different sockets where the
read socket was non-blocking but the write socket was blocking. But that
seems like an implausible situation to worry too much about.
Change-Id: I9d9f2526afc2e0fd0e5440e9a047f419a2d61afa
Reviewed-on: https://boringssl-review.googlesource.com/2140
Reviewed-by: Adam Langley <agl@google.com>
This code isn't compiled in. It seems there was some half-baked logic for a
7-byte alert that includes more information about handshake messages
retransmit.
No such alert exists, and the code had a FIXME anyway. If it gets resurrected
in DTLS 1.3 or some extension, we can deal with it then.
Change-Id: I8784ea8ee44bb8da4b0fe5d5d507997526557432
Reviewed-on: https://boringssl-review.googlesource.com/2121
Reviewed-by: Adam Langley <agl@google.com>
This code was dead as ssl3_get_client_certificate no longer allows a
ClientHello; the hash would be reset, but then the handshake would fail anyway.
Change-Id: Ib98e6a319c048c263d7ee3a27832ea57bdd0e2ad
Reviewed-on: https://boringssl-review.googlesource.com/2120
Reviewed-by: Adam Langley <agl@google.com>
This change adds support to the Go code for renegotiation as a client,
meaning that we can test BoringSSL's renegotiation as a server.
Change-Id: Iaa9fb1a6022c51023bce36c47d4ef7abee74344b
Reviewed-on: https://boringssl-review.googlesource.com/2082
Reviewed-by: Adam Langley <agl@google.com>
Minor change, but they're the users of the old API left within
BoringSSL.
Change-Id: Ic24e0d006c97fa5265abc3373d3f98aa8d2f8b1e
Reviewed-on: https://boringssl-review.googlesource.com/2100
Reviewed-by: Adam Langley <agl@google.com>
If generating the master secret or applying the PSK post-processing fails,
we'll double-free all the ECDH state.
Change-Id: Id52931af73bdef5eceb06f7e64d32fdda629521e
Reviewed-on: https://boringssl-review.googlesource.com/2063
Reviewed-by: Adam Langley <agl@google.com>
Like ssl3_get_client_key_exchange, it is split into three parts:
- If PSK, query the PSK and write out the PSK identity.
- Compute the base pre-master secret.
- If PSK, compute the final pre-master secret.
This also fixes some double-frees on malloc failures in the ECDHE case. And it
avoids using the handshake output buffer to start the premaster secret.
Change-Id: I8631ee33c1e9c19604b3dcce2c676c83893c308d
Reviewed-on: https://boringssl-review.googlesource.com/2062
Reviewed-by: Adam Langley <agl@google.com>
pskKeyAgreement is now a wrapper over a base key agreement.
Change-Id: Ic18862d3e98f7513476f878b8df5dcd8d36a0eac
Reviewed-on: https://boringssl-review.googlesource.com/2053
Reviewed-by: Adam Langley <agl@google.com>
The current implementation switches the order of other_secret and psk;
other_secret is first. Fix it and rewrite with CBB instead. The server half got
fixed on accident in a prior refactor.
Change-Id: Ib52a756aadd66e4bf22c66794447f71f4772da09
Reviewed-on: https://boringssl-review.googlesource.com/2052
Reviewed-by: Adam Langley <agl@google.com>
Only the three plain PSK suites for now. ECDHE_PSK_WITH_AES_128_GCM_SHA256 will
be in a follow-up.
Change-Id: Iafc116a5b2798c61d90c139b461cf98897ae23b3
Reviewed-on: https://boringssl-review.googlesource.com/2051
Reviewed-by: Adam Langley <agl@google.com>
Deprecate the old two-pass version of the function. If the ticket is too long,
replace it with a placeholder value but keep the connection working.
Change-Id: Ib9fdea66389b171862143d79b5540ea90a9bd5fb
Reviewed-on: https://boringssl-review.googlesource.com/2011
Reviewed-by: Adam Langley <agl@google.com>
The old ones inverted their return value. Add SSL_(CTX_)set_srtp_profiles which
return success/failure correctly and deprecate the old functions. Also align
srtp.h with the new style since it's very short.
When this rolls through, we can move WebRTC over to the new ones.
Change-Id: Ie55282e8858331910bba6ad330c8bcdd0e38f2f8
Reviewed-on: https://boringssl-review.googlesource.com/2060
Reviewed-by: Adam Langley <agl@google.com>
Doing some archeaology, since the initial OpenSSL commit, key_arg has been
omitted from the serialization if key_arg_length was 0. Since this is an
SSLv2-only field and resuming an SSLv2 session with SSLv3+ is not possible,
there is no need to support parsing those sessions.
Interestingly, it is actually not the case that key_arg_length was only ever
set in SSLv2, historically. In the initial commit of OpenSSL, SSLeay 0.8.1b,
key_arg was used to store what appears to be the IV. That was then removed in
the next commit, an import of SSLeay 0.9.0b, at which point key_arg was only
ever set in SSLv3. That is old enough that there is certainly no need to
parse pre-SSLeay-0.9.0b sessions...
Change-Id: Ia768a2d97ddbe60309be20e2efe488640c4776d9
Reviewed-on: https://boringssl-review.googlesource.com/2050
Reviewed-by: Adam Langley <agl@google.com>
No more need for all the macros. For now, this still follows the two-pass i2d_*
API despite paying a now-unnecessary malloc. The follow-on commit will expose a
more reasonable API and deprecate this one.
Change-Id: I50ec63e65afbd455ad3bcd2f1ae3c782d9e8f9d2
Reviewed-on: https://boringssl-review.googlesource.com/2000
Reviewed-by: Adam Langley <agl@google.com>
Do away with all those unreadable macros. Also fix many many memory leaks in
the SSL_SESSION reuse case. Add a number of helper functions in CBS to help
with parsing optional fields.
Change-Id: I2ce8fd0d5b060a1b56e7f99f7780997fabc5ce41
Reviewed-on: https://boringssl-review.googlesource.com/1998
Reviewed-by: Adam Langley <agl@google.com>
There's only one caller and it doesn't use that feature. While I'm here, tidy
that function a little. Don't bother passing FALLBACK_SCSV into
ssl3_get_cipher_by_value.
Change-Id: Ie71298aeaaab6e24401e0a6c2c0d2281caa93ba4
Reviewed-on: https://boringssl-review.googlesource.com/2030
Reviewed-by: Adam Langley <agl@google.com>
There's no need to store them on the session. They're temporary handshake
state and weren't serialized in d2i_SSL_SESSION anyway.
Change-Id: I830d378ab49aaa4fc6c4c7a6a8c035e2263fb763
Reviewed-on: https://boringssl-review.googlesource.com/1990
Reviewed-by: Adam Langley <agl@google.com>
This removes the need to track the client cipher list in the SSL_SESSION. It
also eliminates a field in SSL_SESSION that wasn't serialized by
i2d_SSL_SESSION. It's only used to implement SSL_get_shared_ciphers which is
only used by debug code.
Moreover, it doesn't work anyway. The SSLv2 logic pruned that field to the
common ciphers, but the SSLv3+ logic just stores the client list as-is. I found
no internal callers that were actually compiled (if need be we can stub in
something that always returns the empty string or so).
Change-Id: I55ad45964fb4037fd623f7591bc574b2983c0698
Reviewed-on: https://boringssl-review.googlesource.com/1866
Reviewed-by: Adam Langley <agl@google.com>
This resolves a pile of MSVC warnings in Chromium.
Change-Id: Ib9a29cb88d8ed8ec4118d153260f775be059a803
Reviewed-on: https://boringssl-review.googlesource.com/1865
Reviewed-by: Adam Langley <agl@google.com>
We patch bugs into the runner implementation for testing, not our own.
Change-Id: I0a8ac73eaeb70db131c01a0fd9c84f258589a884
Reviewed-on: https://boringssl-review.googlesource.com/1845
Reviewed-by: Adam Langley <agl@google.com>
Remove one more difference to worry about switching between TLS and SSLv3
method tables.
Although this does change the get_ssl_method hook for the version-specific
tables (before TLS and SSLv3 would be somewhat partitioned), it does not appear
to do anything. get_ssl_method is only ever called in SSL_set_session for
client session resumption. Either you're using the version-specific method
tables and don't know about other versions anyway or you're using SSLv23 and
don't partition TLS vs SSL3 anyway.
BUG=chromium:403378
Change-Id: I8cbdf02847653a01b04dbbcaf61fcb3fa4753a99
Reviewed-on: https://boringssl-review.googlesource.com/1842
Reviewed-by: Adam Langley <agl@google.com>
Use the newly split out tls1_check_point_format. Also don't condition it on
s->tlsext_ecpointformatlist which is unrelated and made this code never run.
Change-Id: I9d77654c8eaebde07079d989cd60fbcf06025d75
Reviewed-on: https://boringssl-review.googlesource.com/1844
Reviewed-by: Adam Langley <agl@google.com>
This avoids the strange optional parameter thing by moving it to the client.
Also document what the functions should do.
Change-Id: I361266acadedfd2bfc4731f0900821fc2c2f954d
Reviewed-on: https://boringssl-review.googlesource.com/1843
Reviewed-by: Adam Langley <agl@google.com>
The TLS-specific hooks have been removed. We aim to no longer perform version
negotiation as a pre-processing step, so ensure the only differences to worry
about are the version, get_method hook, and the enc_data.
BUG=chromium:403378
Change-Id: I628ec6f4c50ceed01d7af8f4110b6dc95cfbe023
Reviewed-on: https://boringssl-review.googlesource.com/1841
Reviewed-by: Adam Langley <agl@google.com>
Still need to convert serializing code to CBB, but the current one is kinda
crazy.
Change-Id: I00e12a812c815bf01c53a26ccbb7c6727ea8c8fc
Reviewed-on: https://boringssl-review.googlesource.com/1840
Reviewed-by: Adam Langley <agl@google.com>
This fixes version mismatches on resumption without rewriting the entirety of
OpenSSL's version negotiation logic. (Which still badly needs to happen.)
BUG=chromium:417134
Change-Id: Ifa0c5dd2145e37fcd39eec25dfb3561ddb87c9f0
Reviewed-on: https://boringssl-review.googlesource.com/1823
Reviewed-by: Adam Langley <agl@google.com>
+ and - should also be forbidden. Any operation other than appending will mix
up the in_group bits and give unexpected behavior.
Change-Id: Ieaebb9ee6393aa36243d0765e45cae667f977ef5
Reviewed-on: https://boringssl-review.googlesource.com/1803
Reviewed-by: Adam Langley <agl@google.com>
It's redundant with the check at the top of the loop.
Change-Id: If64e5396658ca28cad937411c6fc8671a2abfdcd
Reviewed-on: https://boringssl-review.googlesource.com/1802
Reviewed-by: Adam Langley <agl@google.com>
It's just checking some constants. Also the comment's off now.
Change-Id: I934d32b76c705758ae7c18009d867e9820a4c5a8
Reviewed-on: https://boringssl-review.googlesource.com/1800
Reviewed-by: Adam Langley <agl@google.com>
This gives inappropriate_fallback and close_notify sent during the handshake
error strings. It'd also avoid having to write
case SSL_AD_REASON_OFFSET + SSL_AD_CLOSE_NOTIFY:
in Chromium.
Change-Id: I42123d5452eb7843ead883d112e58b3f087d3067
Reviewed-on: https://boringssl-review.googlesource.com/1780
Reviewed-by: Adam Langley <agl@google.com>
Both as client and as server. Also tests that ALPN causes False Start to kick
in.
Change-Id: Ib570346f3c511834152cd2df2ef29541946d3ab4
Reviewed-on: https://boringssl-review.googlesource.com/1753
Reviewed-by: Adam Langley <agl@google.com>
Otherwise the child is busy waiting for its second handshake.
Change-Id: Ic613eeb04c5d6c1ec1e1bbcb13946d3ac31d05f1
Reviewed-on: https://boringssl-review.googlesource.com/1752
Reviewed-by: Adam Langley <agl@google.com>
Notably, this would have caught ed8270a55c
(although, apart from staring at code coverage, knowing to set resumeSession on
the server test isn't exactly obvious). Perhaps we should systematically set it
on all extension server tests; ClientHello extension parsing happens after
resumption has been determined and is often sensitive to it.
Change-Id: Ie83f294a26881a6a41969e9dbd102d0a93cb68b5
Reviewed-on: https://boringssl-review.googlesource.com/1750
Reviewed-by: Adam Langley <agl@google.com>
Splitting the strength mask between SSL_EXP_MASK and SSL_STRONG_MASK no longer
does anything. Also remove the SSL_NOT_EXP bit and condense the strength bits.
Change-Id: I9e61acdde008c3ce06bb37f78a72099fc53ed080
Reviewed-on: https://boringssl-review.googlesource.com/1757
Reviewed-by: Adam Langley <agl@google.com>
Simplify all the cipher gathering logic. The set of supported ciphers is known,
so there is no need to determine if some cipher exists but doesn't work.
Change-Id: Idcaae67e7bfc40a3deb925d85ee1a99a931b67e7
Reviewed-on: https://boringssl-review.googlesource.com/1756
Reviewed-by: Adam Langley <agl@google.com>
Chromium does not like static initializers, and the CPU logic uses one to
initialize CPU bits. However, the crypto library lacks an explicit
initialization function, which could complicate (no compile-time errors)
porting existing code which uses crypto/, but not ssl/.
Add an explicit CRYPTO_library_init function, but make it a no-op by default.
It only does anything (and is required) if building with
BORINGSSL_NO_STATIC_INITIALIZER.
Change-Id: I6933bdc3447fb382b1f87c788e5b8142d6f3fe39
Reviewed-on: https://boringssl-review.googlesource.com/1770
Reviewed-by: Adam Langley <agl@google.com>
These were added in TLS 1.2. They are like the standard AES-CBC cipher suites,
but use different HMACs.
Change-Id: Ib89ddebd1aa398b1347f8285f5d827068b1bd181
Reviewed-on: https://boringssl-review.googlesource.com/1730
Reviewed-by: Adam Langley <agl@google.com>
Update SSL_OP_ALL to account for SSL_OP_CRYPTOPRO_TLSEXT_BUG being gone,
and update ssl3_setup_write_buffer to account for SSL_MODE_CBC_RECORD_SPLITTING
rather than the now defunct SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS.
Also remove SSL_OP_TLS_BLOCK_PADDING_BUG. This is to allow for a buggy peer
which pads CBC with N bytes of value N rather than N+1 bytes of value N. This
quirk has been broken since CBC padding checks became constant-time, as
demonstrated by this attempt at a test. (Instead of just decrementing
padding_length, it needs to also keep track of a separate padding_value and not
decrement that one.)
https://boringssl-review.googlesource.com/#/c/1690/
(The quirk would also fall over anyway if the buggy client ever did a session
resumption; then the server speaks first rather than the client, and the quirk
triggered on reading the first encrypted record from the peer.)
Change-Id: I19942dc629a47832aead77a46bb50e0b0a9780b3
Reviewed-on: https://boringssl-review.googlesource.com/1694
Reviewed-by: Adam Langley <agl@google.com>
Configures the SSL stack to log session information to a BIO. The intent is to
support NSS's SSLKEYLOGFILE environment variable. Add support for the same
environment variable to tool/client.cc.
Tested against Wireshark 1.12.0.
BUG=393477
Change-Id: I4c231f9abebf194eb2df4aaeeafa337516774c95
Reviewed-on: https://boringssl-review.googlesource.com/1699
Reviewed-by: Adam Langley <agl@google.com>
The only MD5 CBC-mode cipher suites are TLS_KRB5_WITH_DES_CBC_MD5,
TLS_KRB5_WITH_3DES_EDE_CBC_MD5, and TLS_KRB5_WITH_IDEA_CBC_MD5. We do not
support those, and it seems quite safe to assume that list will not grow.
No current cipher suites use SHA-224 or SHA-512 MACs. We can restore those
cases if that ever changes, but hopefully any future cipher suites we care
about will be using the AEAD construction.
Change-Id: I7f2d30238e2156a59b5fed1e48fabe6660fc9b67
Reviewed-on: https://boringssl-review.googlesource.com/1697
Reviewed-by: Adam Langley <agl@google.com>
This check got refactored in OpenSSL 1.0.2 and broke in the process. Fix this
and add a test. Otherwise things like client auth can get slightly confused; it
will try to sign the MD5/SHA-1 hash, but the TLS 1.2 cipher suite may not use
SSL_HANDSHAKE_MAC_DEFAULT, so those digests won't be available.
Based on upstream's 226751ae4a1f3e00021c43399d7bb51a99c22c17.
Change-Id: I5b864d3a696f3187b849c53b872c24fb7df27924
Reviewed-on: https://boringssl-review.googlesource.com/1696
Reviewed-by: Adam Langley <agl@google.com>
Switch all of SRTP code to the standard return value convention with two
exceptions. Unfortunately, OpenSSL exposed API with the wrong error code. Keep
the public API flipped and document.
Change-Id: I43ac82513f4f52bb36a0b54aba9b9e0fa285730e
Reviewed-on: https://boringssl-review.googlesource.com/1691
Reviewed-by: Adam Langley <agl@google.com>
If this is part of SSL_OP_ALL, we should have a test for it.
Change-Id: Ia72422beb2da6434726e78e174f3416f90f7c897
Reviewed-on: https://boringssl-review.googlesource.com/1695
Reviewed-by: Adam Langley <agl@google.com>
Those codepaths are never hit.
Change-Id: Ib6908ebe90ab667774785298fdc3f96acc4b50df
Reviewed-on: https://boringssl-review.googlesource.com/1693
Reviewed-by: Adam Langley <agl@google.com>
Thanks to Denis Denisov for running the analysis.
Change-Id: I80810261e013423e746fd8d8afefb3581cffccc0
Reviewed-on: https://boringssl-review.googlesource.com/1701
Reviewed-by: Adam Langley <agl@google.com>
Thanks to Denis Denisov for noting that |host_name| could be used while
uninitialised in the resumption case.
While in the area, this change also renames |servername_done| to
something more reasonable and removes a documented value that was never
used. Additionally, the SNI ack was only sent when not resuming so
calculating whether it should be sent when processing ClientHello
extensions (which is after s->hit has been set) is superfluous.
Lastly, since SNI is only acked by servers, there's no need to worry
about the SNI callback returning NOACK in the client case.
Change-Id: Ie4ecfc347bd7afaf93b12526ff9311cc45da4df6
Reviewed-on: https://boringssl-review.googlesource.com/1700
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
Reorder the tests in all_tests.sh to be in alphabetical order.
Change-Id: Idc6df6ab4a25709312a6f58635061bb643582c70
Reviewed-on: https://boringssl-review.googlesource.com/1680
Reviewed-by: Adam Langley <agl@google.com>
Remove the old implementation which was excessively general. This mirrors the
SCT support and adds a single boolean flag to request an OCSP response with no
responder IDs, extensions, or frills. The response, if received, is stored on
the SSL_SESSION so that it is available for (re)validation on session
resumption; Chromium revalidates the saved auth parameters on resume.
Server support is unimplemented for now. This API will also need to be adjusted
in the future if we implement RFC 6961.
Change-Id: I533c029b7f7ea622d814d05f934fdace2da85cb1
Reviewed-on: https://boringssl-review.googlesource.com/1671
Reviewed-by: Adam Langley <agl@google.com>
Maintain a handshake buffer in prf.go to implement TLS 1.2 client auth. Also
use it for SSL 3. This isn't strictly necessary as we know the hash functions,
but Go's hash.Hash interface lacks a Copy method.
Also fix the server-side tests which failed to test every TLS version.
Change-Id: I98492c334fbb9f2f0f89ee9c5c8345cafc025600
Reviewed-on: https://boringssl-review.googlesource.com/1664
Reviewed-by: Adam Langley <agl@google.com>
Don't pollute the embedder's namespace with a session_ctx macro. It looks like
the difference was that, without TLS extensions, session_ctx was ctx rather
than initial_ctx. Now it's always initial_ctx. Retain the semantics of
switching SSL_CTX's out after the fact, until/unless we decide to replace that
with something less scary-sounding.
Change-Id: Ie5df5138aec25218ca80031cf645671968b8a54a
Reviewed-on: https://boringssl-review.googlesource.com/1663
Reviewed-by: Adam Langley <agl@google.com>
Get all this stuff out of the way.
- OPENSSL_NO_MD5
- OPENSSL_NO_SHA
- OPENSSL_NO_EC
- OPENSSL_NO_ECDSA
- OPENSSL_NO_ECDH
- OPENSSL_NO_NEXTPROTONEG
- OPENSSL_NO_DH
- OPENSSL_NO_SSL3
- OPENSSL_NO_RC4
- OPENSSL_NO_RSA
Also manually removed a couple instances of OPENSSL_NO_DSA that seemed to be
confused anyway. Did some minor manual cleanup. (Removed a few now-pointless
'if (0)'s.)
Change-Id: Id540ba97ee22ff2309ab20ceb24c7eabe766d4c4
Reviewed-on: https://boringssl-review.googlesource.com/1662
Reviewed-by: Adam Langley <agl@google.com>
This moves CertificateVerify digest processing to the new
SSL_GET_MESSAGE_DONT_HASH_MESSAGE flag. It also refactors it similarly to
ssl3_send_cert_verify and moves that logic to a common ssl3_cert_verify_hash
function to compute the handshake hash.
This removes a large chunk of duplicate (and divergent!) logic between TLS and
DTLS. It also removes TLS1_FLAGS_KEEP_HANDSHAKE.
Change-Id: Ia63c94f7d76d901bc9c4c33454fbfede411adf63
Reviewed-on: https://boringssl-review.googlesource.com/1633
Reviewed-by: Adam Langley <agl@google.com>
Upstream originally sampled the Finished message's hash at ChangeCipherSpec,
but our patches to add messages between the two complicated this. Move DTLS to
this path, but use the new SSL_GET_MESSAGE_DONT_HASH_MESSAGE flag to avoid
special-casing message types in ssl3_get_message.
Change-Id: I9c8ddd9cc500c94dff2ec2f696f89d50ab01b3ad
Reviewed-on: https://boringssl-review.googlesource.com/1632
Reviewed-by: Adam Langley <agl@google.com>
This avoids needing the save the hash on the SSL* (and use some field for two
purposes). Instead, use the new SSL_GET_MESSAGE_DONT_HASH_MESSAGE flag (which
actually was already used here, but at the time, pointlessly). Also fix a minor
bug where the hash would be recomputed in non-blocking mode because init_num
may stay zero for a few state machine iterations.
Change-Id: I3d8331cf3134c5f9a3eda9e988bba5bcebe40933
Reviewed-on: https://boringssl-review.googlesource.com/1631
Reviewed-by: Adam Langley <agl@google.com>
This replaces the special-case in ssl3_get_message for Channel ID. Also add
ssl3_hash_current_message to hash the current message, taking TLS vs DTLS
handshake header size into account.
One subtlety with this flag is that a message intended to be processed with
SSL_GET_MESSAGE_DONT_HASH_MESSAGE cannot follow an optional message
(reprocessed with reuse_message, etc.). There is an assertion to that effect.
If need be, we can loosen it to requiring that the preceeding optional message
also pass SSL_GET_MESSAGE_DONT_HASH_MESSAGE and then maintain some state to
perform the more accurate assertion, but this is sufficient for now.
Change-Id: If8c87342b291ac041a35885b9b5ee961aee86eab
Reviewed-on: https://boringssl-review.googlesource.com/1630
Reviewed-by: Adam Langley <agl@google.com>
Now that only RSA and ECDSA certificates are supported, the server should just
reject non-signing ones outright, rather than allowing them to skip
CertificateVerify.
Change-Id: I7fe5ed3adde14481016ee841ed241faba18c26f0
Reviewed-on: https://boringssl-review.googlesource.com/1609
Reviewed-by: Adam Langley <agl@google.com>
We may wish to pass data to the runner that contains NULs.
Change-Id: Id78dad0ad0b5b6d0537481c818e3febdf1740cc9
Reviewed-on: https://boringssl-review.googlesource.com/1603
Reviewed-by: Adam Langley <agl@google.com>
The return values are now 1/0, not 1/0/-1.
Change-Id: If65bb08a229c7944cb439ec779df461904d0ec19
Reviewed-on: https://boringssl-review.googlesource.com/1607
Reviewed-by: Adam Langley <agl@google.com>
