The logic is a little hairy, partly because we used to support multiple
certificate slots.
Change-Id: Iee8503e61f5e0e91b7bcb15f526e9ef7cc7ad860
Reviewed-on: https://boringssl-review.googlesource.com/7823
Reviewed-by: David Benjamin <davidben@google.com>
There was only one function that required BoringSSL to know how to read
directories. Unfortunately, it does have some callers and it's not immediately
obvious whether the code is unreachable. Rather than worry about that, just
toss it all into decrepit.
In doing so, do away with the Windows and PNaCl codepaths. Only implement
OPENSSL_DIR_CTX on Linux.
Change-Id: Ie64d20254f2f632fadc3f248bbf5a8293ab2b451
Reviewed-on: https://boringssl-review.googlesource.com/7661
Reviewed-by: Adam Langley <agl@google.com>
The i2d_X509() function can return a negative value on error. Therefore
we should make sure we check it.
Issue reported by Yuan Jochen Kang.
(Imported from upstream's 8f43c80bfac15544820739bf035df946eeb603e8)
Change-Id: If247d5bf1d792eb7c6dc179b606ed21ea0ccdbb8
Reviewed-on: https://boringssl-review.googlesource.com/7743
Reviewed-by: David Benjamin <davidben@google.com>
Opaquifying SSL_SESSION is less important than the other structs, but this will
cause less turbulence in wpa_supplicant if we add this API too. Semantics and
name taken from OpenSSL 1.1.0 to match.
BUG=6
Change-Id: Ic39f58d74640fa19a60aafb434dd2c4cb43cdea9
Reviewed-on: https://boringssl-review.googlesource.com/7725
Reviewed-by: Adam Langley <agl@google.com>
Although the server_name extension was intended to be extensible to new name
types, OpenSSL 1.0.x had a bug which meant different name types will cause an
error. Further, RFC 4366 originally defined syntax inextensibly. RFC 6066
corrected this mistake, but adding new name types is no longer feasible.
Act as if the extensibility does not exist to simplify parsing. This also
aligns with OpenSSL 1.1.x's behavior. See upstream's
062178678f5374b09f00d70796f6e692e8775aca and
https://www.ietf.org/mail-archive/web/tls/current/msg19425.html
Change-Id: I5af26516e8f777ddc1dab5581ff552daf2ea59b5
Reviewed-on: https://boringssl-review.googlesource.com/7294
Reviewed-by: David Benjamin <davidben@google.com>
We reset it to SSL_NOTHING at the start of ever SSL_get_error-using operation.
Then we only set it to a non-NOTHING value in the rest of the stack on error
paths.
Currently, ssl->rwstate is set all over the place. Sometimes the pattern is:
ssl->rwstate = SSL_WRITING;
if (BIO_write(...) <= 0) {
goto err;
}
ssl->rwstate = SSL_NOTHING;
Sometimes we only set it to the non-NOTHING value on error.
if (BIO_write(...) <= 0) {
ssl->rwstate = SSL_WRITING;
}
ssl->rwstate = SSL_NOTHING;
Sometimes we just set it to SSL_NOTHING far from any callback in random places.
The third case is arbitrary and clearly should be removed.
But, in the second case, we sometimes forget to undo it afterwards. This is
largely harmless since an error in the error queue overrides rwstate, but we
don't always put something in the error queue (falling back to
SSL_ERROR_SYSCALL for "I'm not sure why it failed. Perhaps it was one of your
callbacks? Check your errno equivalent."), but in that case a stray rwstate
value will cause it to be wrong.
We could fix the cases where we fail to set SSL_NOTHING on success cases, but
this doesn't account for there being multiple SSL_get_error operations. The
consumer may have an SSL_read and an SSL_write running concurrently. Instead,
it seems the best option is to lift the SSL_NOTHING reset to the operations and
set SSL_WRITING and friends as in the second case.
(Someday hopefully we can fix this to just be an enum that is internally
returned. It can convert to something stateful at the API layer.)
Change-Id: I54665ec066a64eb0e48a06e2fcd0d2681a42df7f
Reviewed-on: https://boringssl-review.googlesource.com/7453
Reviewed-by: David Benjamin <davidben@google.com>
The concern is if the peer denies our renegotiation attempt, but we will never
initiate renegotiation. We only support server-initiated renegotiation when we
are acting as the client.
(Strictly speaking, only the client ever initiates renegotiation. The server
sends a HelloRequest to ask the client to initiate it. But we forbid
application data interleave as soon as we see the HelloRequest, so we treat it
as part of the handshake.)
Change-Id: I1a625130de32a7227e4471f2f889255aba962ce4
Reviewed-on: https://boringssl-review.googlesource.com/7452
Reviewed-by: Emily Stark (Dunn) <estark@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
This is just kind of a silly thing to do. NSS doesn't allow them either. Fatal
alerts would kill the connection regardless and warning alerts are useless. We
previously stopped accepting fragmented alerts but still allowed them doubled
up.
This is in preparation for pulling the shared alert processing code between TLS
and DTLS out of read_bytes into some common place.
Change-Id: Idbef04e39ad135f9601f5686d41f54531981e0cf
Reviewed-on: https://boringssl-review.googlesource.com/7451
Reviewed-by: Emily Stark (Dunn) <estark@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
With SSL_PRIVATE_KEY_METHOD, decryption can happen outside of BoringSSL. Rather than crash the process, it would be nicer if BoringSSL handled the error gracefully.
Change-Id: I3f24d066f7a329d41420b208a7e13c82ec966710
Reviewed-on: https://boringssl-review.googlesource.com/7683
Reviewed-by: David Benjamin <davidben@google.com>
There was only one function that required BoringSSL to know how to read
directories. Unfortunately, it does have some callers and it's not immediately
obvious whether the code is unreachable. Rather than worry about that, just
toss it all into decrepit.
In doing so, do away with the Windows and PNaCl codepaths. Only implement
OPENSSL_DIR_CTX on Linux.
Change-Id: I3eb55b098e3aa042b422bb7da115c0812685553e
A lot of consumers of obj.h only want the NID values. Others didn't need
it at all. This also removes some OBJ_nid2sn and OBJ_nid2ln calls in EVP
error paths which isn't worth pulling a large table in for.
BUG=chromium:499653
Change-Id: Id6dff578f993012e35b740a13b8e4f9c2edc0744
Reviewed-on: https://boringssl-review.googlesource.com/7563
Reviewed-by: David Benjamin <davidben@google.com>
We reordered extensions some time ago to ensure a non-empty extension was last,
but the comment was since lost (or I forgot to put one in in the first place).
Add one now so we don't regress.
Change-Id: I2f6e2c3777912eb2c522a54bbbee579ee37ee58a
Reviewed-on: https://boringssl-review.googlesource.com/7570
Reviewed-by: David Benjamin <davidben@google.com>
These only affect the tests.
Change-Id: If22d047dc98023501c771787b485276ece92d4a2
Reviewed-on: https://boringssl-review.googlesource.com/7573
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
We do an ad-hoc upper-bound check, but if the version is too low, we also
shouldn't offer the session. This isn't fatal to the connection and doesn't
have issues (we'll check the version later regardless), but offering a session
we're never going to accept is pointless. The check should match what we do in
ServerHello.
Credit to Matt Caswell for noticing the equivalent issue in an OpenSSL pull
request.
Change-Id: I17a4efd37afa63b34fca53f4c9b7ac3ae2fa3336
Reviewed-on: https://boringssl-review.googlesource.com/7543
Reviewed-by: David Benjamin <davidben@google.com>
The removes the last of OpenSSL's variables that count occurrences of a
function on the stack.
Change-Id: I1722c6d47bedb47b1613c4a5da01375b5c4cc220
Reviewed-on: https://boringssl-review.googlesource.com/7450
Reviewed-by: David Benjamin <davidben@google.com>
This removes the final use of in_handshake. Note that there is still a
rentrant call of read_bytes -> handshake_func when we see a
HelloRequest. That will need to be signaled up to ssl_read_impl
separately out of read_app_data.
Change-Id: I823de243f75e6b73eb40c6cf44157b4fc21eb8fb
Reviewed-on: https://boringssl-review.googlesource.com/7439
Reviewed-by: David Benjamin <davidben@google.com>
This removes one use of in_handshake and consolidates some DTLS and TLS
code.
Change-Id: Ibbdd38360a983dabfb7b18c7bd59cb5e316b2adb
Reviewed-on: https://boringssl-review.googlesource.com/7435
Reviewed-by: David Benjamin <davidben@google.com>
fatal_alert isn't read at all right now, and warn_alert is only checked
for close_notify. We only need three states:
- Not shutdown.
- Got a fatal alert (don't care which).
- Got a warning close_notify.
Leave ssl->shutdown alone for now as it's tied up with SSL_set_shutdown
and friends. To distinguish the remaining two, we only need a boolean.
Change-Id: I5877723af82b76965c75cefd67ec1f981242281b
Reviewed-on: https://boringssl-review.googlesource.com/7434
Reviewed-by: David Benjamin <davidben@google.com>
Otherwise it's confusing if you mistype the test name.
Change-Id: Idf32081958f85f3b5aeb8993a07f6975c27644f8
Reviewed-on: https://boringssl-review.googlesource.com/7500
Reviewed-by: Emily Stark (Dunn) <estark@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Most code already dereferences it directly.
Change-Id: I227fa91ecbf25a19077f7cfba21b0abd2bc2bd1d
Reviewed-on: https://boringssl-review.googlesource.com/7422
Reviewed-by: David Benjamin <davidben@google.com>
Partially fixes build with -Wmissing-prototypes.
Change-Id: I828bcfb49b23c5a9ea403038bc3fb76750556ef8
Signed-off-by: Piotr Sikora <piotrsikora@google.com>
Reviewed-on: https://boringssl-review.googlesource.com/7514
Reviewed-by: David Benjamin <davidben@google.com>
Partially fixes build with -Wmissing-prototypes -Wmissing-declarations.
Change-Id: I6048f5b7ef31560399b25ed9880156bc7d8abac2
Signed-off-by: Piotr Sikora <piotrsikora@google.com>
Reviewed-on: https://boringssl-review.googlesource.com/7511
Reviewed-by: David Benjamin <davidben@google.com>
Change-Id: I6267c9bfb66940d0b6fe5368514210a058ebd3cc
Reviewed-on: https://boringssl-review.googlesource.com/7494
Reviewed-by: Emily Stark (Dunn) <estark@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Also fix a long/unsigned-long cast. (ssl_get_message returns long. It really
shouldn't, but ssl_get_message needs much more work than just a long -> size_t
change, so leave it as long for now.)
Change-Id: Ice8741f62a138c0f35ca735eedb541440f57e114
Reviewed-on: https://boringssl-review.googlesource.com/7457
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Found by libFuzzer.
Change-Id: Ifa343a184cc65f71fb6591d290b2d47d24a2be80
Reviewed-on: https://boringssl-review.googlesource.com/7456
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
OpenSSL historically made some poor API decisions. Rather than returning a
status enum in SSL_read, etc., these functions must be paired with
SSL_get_error which determines the cause of the last error's failure. This
requires SSL_read communicate with SSL_get_error with some stateful flag,
rwstate.
Further, probably as workarounds for bugs elsewhere, SSL_get_error does not
trust rwstate. Among other quirks, if the error queue is non-empty,
SSL_get_error overrides rwstate and returns a value based on that. This
requires that SSL_read, etc., be called with an empty error queue. (Or we hit
one of the spurious ERR_clear_error calls in the handshake state machine,
likely added as further self-workarounds.)
Since requiring callers consistently clear the error queue everywhere is
unreasonable (crbug.com/567501), clear ERR_clear_error *once* at the entry
point. Until/unless[*] we make SSL_get_error sane, this is the most reasonable
way to get to the point that clearing the error queue on error is optional.
With those in place, the calls in the handshake state machine are no longer
needed. (I suspect all the ERR_clear_system_error calls can also go, but I'll
investigate and think about that separately.)
[*] I'm not even sure it's possible anymore, thanks to the possibility of
BIO_write pushing to the error queue.
BUG=567501,593963
Change-Id: I564ace199e5a4a74b2554ad3335e99cd17120741
Reviewed-on: https://boringssl-review.googlesource.com/7455
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Align all unexpected messages on SSL_R_UNEXPECTED_MESSAGE. Make the SSL 3.0
case the exceptional case. In doing so, make sure the SSL 3.0
SSL_VERIFY_FAIL_IF_NO_PEER_CERT case has its own test as that's a different
handshake shape.
Change-Id: I1a539165093fbdf33e2c1b25142f058aa1a71d83
Reviewed-on: https://boringssl-review.googlesource.com/7421
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
If we're doing substring matching, we should at least include the delimiter.
Change-Id: I98bee568140d0304bbb6a2788333dbfca044114c
Reviewed-on: https://boringssl-review.googlesource.com/7420
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
The old logic was quite messy and grew a number of no-ops over the
years. It was also unreasonably fond of the variable name |i|.
The current logic wasn't even correct. It's overly fond of sending no
certificate, even when it pushes errors on the error queue for a fatal
error.
Change-Id: Ie5b2b38dd309f535af1d17fa261da7dc23185866
Reviewed-on: https://boringssl-review.googlesource.com/7418
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
In TLS, you never skip the Certificate message. It may be empty, but its
presence is determined by CertificateRequest. (This is sensible.)
In SSL 3.0, the client omits the Certificate message. This means you need to
probe and may receive either Certificate or ClientKeyExchange (thankfully,
ClientKeyExchange is not optional, or we'd have to probe at ChangeCipherSpec).
We didn't have test coverage for this, despite some of this logic being a
little subtle asynchronously. Fix this.
Change-Id: I149490ae5506f02fa0136cb41f8fea381637bf45
Reviewed-on: https://boringssl-review.googlesource.com/7419
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Also add no-certificate cases to the state machine coverage tests.
Change-Id: I88a80df6f3ea69aabc978dd356abcb9e309e156f
Reviewed-on: https://boringssl-review.googlesource.com/7417
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Change-Id: I5b38e2938811520f52ece6055245248c80308b4d
Reviewed-on: https://boringssl-review.googlesource.com/7416
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
If a Read or Write blocks for too long, time out the operation. Otherwise, some
kinds of test failures result in hangs, which prevent the test harness from
progressing. (Notably, OpenSSL currently has a lot of those failure modes and
upstream expressed interest in being able to run the tests to completion.)
Go's APIs want you to send an absolute timeout, to avoid problems when a Read
is split into lots of little Reads. But we actively want the timer to reset in
that case, so this needs a trivial adapter.
The default timeout is set at 15 seconds for now. If this becomes a problem, we
can extend it or build a more robust deadlock detector given an out-of-band
channel (shim tells runner when it's waiting on data, abort if we're also
waiting on data at the same time). But I don't think we'll need that
complexity. 15 seconds appears fine for both valgrind and running tests on a
Nexus 4.
BUG=460189
Change-Id: I6463fd36058427d883b526044da1bbefba851785
Reviewed-on: https://boringssl-review.googlesource.com/7380
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
In OpenSSL, they create socket BIOs. The distinction isn't important on UNIX.
On Windows, file descriptors are provided by the C runtime, while sockets must
use separate recv and send APIs. Document how these APIs are intended to work.
Also add a TODO to resolve the SOCKET vs int thing. This code assumes that
Windows HANDLEs only use the bottom 32 bits of precision. (Which is currently
true and probably will continue to be true for the foreseeable future[*], but
it'd be nice to do this right.)
Thanks to Gisle Vanem and Daniel Stenberg for reporting the bug.
[*] Both so Windows can continue to run 32-bit programs and because of all the
random UNIX software, like OpenSSL and ourselves, out there which happily
assumes sockets are ints.
Change-Id: I67408c218572228cb1a7d269892513cda4261c82
Reviewed-on: https://boringssl-review.googlesource.com/7333
Reviewed-by: David Benjamin <davidben@google.com>
This change adds a |SSL_CTX_set_private_key_method| method that sets key_method on a SSL_CTX's cert.
It allows the private key method to be set once and inherited.
A copy of key_method (from SSL_CTX's cert to SSL's cert) is added in |ssl_cert_dup|.
Change-Id: Icb62e9055e689cfe2d5caa3a638797120634b63f
Reviewed-on: https://boringssl-review.googlesource.com/7340
Reviewed-by: David Benjamin <davidben@google.com>
I went with NID_x25519 to match NID_sha1 and friends in being lowercase.
However, upstream seems to have since chosen NID_X25519. Match their
name.
Change-Id: Icc7b183a2e2dfbe42c88e08e538fcbd242478ac3
Reviewed-on: https://boringssl-review.googlesource.com/7331
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Change-Id: I9540c931b6cdd4d65fa9ebfc52e1770d2174abd2
Reviewed-on: https://boringssl-review.googlesource.com/7330
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
This is in preparation for adding AES_256_GCM in Chromium below AES_128_GCM.
For now, AES_128_GCM is preferable over AES_256_GCM for performance reasons.
While I'm here, swap the order of 3DES and RC4. Chromium has already disabled
RC4, but the default order should probably reflect that until we can delete it
altogether.
BUG=591516
Change-Id: I1b4df0c0b7897930be726fb8321cee59b5d93a6d
Reviewed-on: https://boringssl-review.googlesource.com/7296
Reviewed-by: Adam Langley <agl@google.com>
EC point format negotiation is dead and gone.
Change-Id: If13ed7c5f31b64df2bbe90c018b2683b6371a980
Reviewed-on: https://boringssl-review.googlesource.com/7293
Reviewed-by: Adam Langley <agl@google.com>
This can be used to get some initial corpus for fuzzing.
Change-Id: Ifcd365995b54d202c4a2674f49e7b28515f36025
Reviewed-on: https://boringssl-review.googlesource.com/7289
Reviewed-by: Adam Langley <agl@google.com>
It's useful to make sure our fuzzer mode works. Not all tests pass, but most
do. (Notably the negative tests for everything we've disabled don't work.) We
can also use then use runner to record fuzzer-mode transcripts with the ciphers
correctly nulled.
Change-Id: Ie41230d654970ce6cf612c0a9d3adf01005522c6
Reviewed-on: https://boringssl-review.googlesource.com/7288
Reviewed-by: Adam Langley <agl@google.com>
Both sides' signature and Finished checks still occur, but the results
are ignored. Also, all ciphers behave like the NULL cipher.
Conveniently, this isn't that much code since all ciphers and their size
computations funnel into SSL_AEAD_CTX.
This does carry some risk that we'll mess up this code. Up until now, we've
tried to avoid test-only changes to the SSL stack.
There is little risk that anyone will ship a BORINGSSL_UNSAFE_FUZZER_MODE build
for anything since it doesn't interop anyway. There is some risk that we'll end
up messing up the disableable checks. However, both skipped checks have
negative tests in runner (see tests that set InvalidSKXSignature and
BadFinished). For good measure, I've added a server variant of the existing
BadFinished test to this CL, although they hit the same code.
Change-Id: I37f6b4d62b43bc08fab7411965589b423d86f4b8
Reviewed-on: https://boringssl-review.googlesource.com/7287
Reviewed-by: Adam Langley <agl@google.com>
Node.js calls it but handles it failing. Since we have abstracted this
in the state machine, we mightn't even be using a cipher suite where the
server's key can be expressed as an EVP_PKEY.
Change-Id: Ic3f013dc9bcd7170a9eb2c7535378d478b985849
Reviewed-on: https://boringssl-review.googlesource.com/7272
Reviewed-by: David Benjamin <davidben@google.com>
This was dropped in d27441a9cb due to lack
of use, but node.js now needs it.
Change-Id: I1e207d4b46fc746cfae309a0ea7bbbc04ea785e8
Reviewed-on: https://boringssl-review.googlesource.com/7270
Reviewed-by: David Benjamin <davidben@google.com>
Found by libFuzzer combined with some experimental unsafe-fuzzer-mode patches
(to be uploaded once I've cleaned them up a bit) to disable all those pesky
cryptographic checks in the protocol.
Change-Id: I9153164fa56a0c2262c4740a3236c2b49a596b1b
Reviewed-on: https://boringssl-review.googlesource.com/7282
Reviewed-by: Adam Langley <agl@google.com>
If LeakSanitizer fires something on a test that's expected to fail, runner will
swallow it. Have stderr output always end in a "--- DONE ---" marker and treat
all output following that as a test failure.
Change-Id: Ia8fd9dfcaf48dd23972ab8f906d240bcb6badfe2
Reviewed-on: https://boringssl-review.googlesource.com/7281
Reviewed-by: Adam Langley <agl@google.com>
