This is consistent with ignoring writeRecord failures. Without doing this, the
DTLS MinimumVersion test now flakily fails with:
FAILED (MinimumVersion-Client-TLS12-TLS1-DTLS)
bad error (wanted ':UNSUPPORTED_PROTOCOL:' / 'remote error: protocol version not supported'): local error 'write unix @: broken pipe', child error 'exit status 2', stdout:
2092242157:error:1007b1a7:SSL routines:ssl3_get_server_hello:UNSUPPORTED_PROTOCOL:../ssl/s3_clnt.c:783:
This is because the MinimumVersion tests assert on /both/ expectedError and
expectedLocalError. The latter is valuable as it asserts on the alert the peer
returned. (I would like us to add more such assertions to our tests where
appropriate.) However, after we send ServerHello, we also send a few messages
following it. This races with the peer shutdown and we sometimes get EPIPE
before reading the alert.
Change-Id: I3fe37940a6a531379673a00976035f8e76e0f825
Reviewed-on: https://boringssl-review.googlesource.com/3337
Reviewed-by: Adam Langley <agl@google.com>
This makes the following changes:
- SSL_cutthrough_complete no longer rederives whether cutthrough happened and
just maintains a handshake bit.
- SSL_in_init no longer returns true if we are False Starting but haven't
completed the handshake. That logic was awkward as it depended on querying
in_read_app_data to force SSL_read to flush the entire handshake. Defaulting
SSL_in_init to continue querying the full handshake and special-casing
SSL_write is better. E.g. the check in bidirectional SSL_shutdown wants to know
if we're in a handshake. No internal consumer of
SSL_MODE_HANDSHAKE_CUTTHROUGH ever queries SSL_in_init directly.
- in_read_app_data is gone now that the final use is dead.
Change-Id: I05211a116d684054dfef53075cd277b1b30623b5
Reviewed-on: https://boringssl-review.googlesource.com/3336
Reviewed-by: Adam Langley <agl@google.com>
It may take up to two iterations of s->handshake_func before it is safe to
continue. Fortunately, even if anything was using False Start this way
(Chromium doesn't), we don't inherit NSS's security bug. The "redundant" check
in the type match case later on in this function saves us.
Amusingly, the success case still worked before this fix. Even though we fall
through to the post-handshake codepath and get a handshake record while
"expecting" app data, the handshake state machine is still pumped thanks to a
codepath meant for renego!
Change-Id: Ie129d83ac1451ad4947c4f86380879db8a3fd924
Reviewed-on: https://boringssl-review.googlesource.com/3335
Reviewed-by: Adam Langley <agl@google.com>
The new V2ClientHello sniff asserts, for safety, that nothing else has
initialized the record layer before it runs. However, OpenSSL allows you to
avoid explicitly calling SSL_connect/SSL_accept and instead let
SSL_read/SSL_write implicitly handshake for you. This check happens at a fairly
low-level in the ssl3_read_bytes function, at which point the record layer has
already been initialized.
Add some tests to ensure this mode works.
(Later we'll lift the handshake check to a higher-level which is probably
simpler.)
Change-Id: Ibeb7fb78e5eb75af5411ba15799248d94f12820b
Reviewed-on: https://boringssl-review.googlesource.com/3334
Reviewed-by: Adam Langley <agl@google.com>
This works fine, but I believe NSS had a bug here a couple years ago. Also move
all the Skip* bug options next to each other in order.
Change-Id: I72dcb3babeee7ba73b3d7dc5ebef2e2298e37438
Reviewed-on: https://boringssl-review.googlesource.com/3333
Reviewed-by: Adam Langley <agl@google.com>
This is the source of much of renegotiation's complexity, and of OpenSSL's
implementation of it. In practice, we only care about renegotiation because of
the client auth hack. There, we can safely assume that no server will send
application data between sending the HelloRequest and completing the handshake.
BUG=429450
Change-Id: I37f5abea5fdedb1d53e24ceb11f71287c74bb777
Reviewed-on: https://boringssl-review.googlesource.com/3332
Reviewed-by: Adam Langley <agl@google.com>
EVP_Digest can fail on malloc failure. May as well tidy that. Also make that
humongous comment less verbose.
Change-Id: I0ba74b901a5ac68711b9ed268b4202dc19242909
Reviewed-on: https://boringssl-review.googlesource.com/3331
Reviewed-by: Adam Langley <agl@google.com>
The ENGINE code had a concept of a stable-ABI for METHODs, because that
might be a useful thing in the future when people want to have blobs
that wrap PKCS#11 or something.
However, at the moment nobody uses this feature and it didn't work very
well anyway: I hadn't updated |ENGINE_free| to free them all and
|set_method| was copying the methods, but not resetting the |is_static|
flag.
This change removes support for non-static methods. We can always put it
back later if we need.
Change-Id: Ic7401c8cb1cadd46b26a215f85bc48562efe9919
Reviewed-on: https://boringssl-review.googlesource.com/3300
Reviewed-by: Adam Langley <agl@google.com>
We have test coverage for invalid alerts, but not for normal ones on the DTLS
side.
Change-Id: I359dce8d4dc80dfa99b5d8bacd73f48a8e4ac310
Reviewed-on: https://boringssl-review.googlesource.com/3291
Reviewed-by: Adam Langley <agl@google.com>
The check on the DTLS side was broken anyway. On the TLS side, the spec does
say to ignore them, but there should be no need for this in future-proofing and
NSS doesn't appear to be lenient here. See also
https://boringssl-review.googlesource.com/#/c/3233/
Change-Id: I0846222936c5e08acdcfd9d6f854a99df767e468
Reviewed-on: https://boringssl-review.googlesource.com/3290
Reviewed-by: Adam Langley <agl@google.com>
SSL_AEAD_CTX ownership is currently too confusing. Instead, rely on the lack of
renego, so the previous epoch always uses the NULL cipher. (Were we to support
DTLS renego, we could keep track of s->d1->last_aead_write_ctx like
s->d1->last_write_sequence, but it isn't worth it.)
Buffered messages also tracked an old s->session, but this is unnecessary. The
s->session NULL check in tls1_enc dates to the OpenSSL initial commit and is
redundant with the aead NULL check.
Change-Id: I9a510468d95934c65bca4979094551c7536980ae
Reviewed-on: https://boringssl-review.googlesource.com/3234
Reviewed-by: Adam Langley <agl@google.com>
We assume that AArch64 systems are modern enough to have getauxval.
Change-Id: I4cc74f04ca5ed50b8ca1cfd00afeaaa01c6caca0
Reviewed-on: https://boringssl-review.googlesource.com/3280
Reviewed-by: Adam Langley <agl@google.com>
Nothing recognized through those codepaths is fragmentable in DTLS. Also remove
an unnecessary epoch check. It's not possible to process a record from the
wrong epoch.
Change-Id: I9d0f592860bb096563e2bdcd2c8e50a0d2b65f59
Reviewed-on: https://boringssl-review.googlesource.com/3232
Reviewed-by: Adam Langley <agl@google.com>
This is only applicable for renego and is wrong anyway. The handshake_read_seq
check doesn't account for message reordering. The correct check is if we
haven't yet processed the peer's CCS in the current handshake.
(The other Finished special-case needs to stay, however.)
Change-Id: Ic42897aab7140285ce2f3be24d52b81851b912b5
Reviewed-on: https://boringssl-review.googlesource.com/3231
Reviewed-by: Adam Langley <agl@google.com>
We will not support any form of DTLS renego.
Change-Id: I6eab4ed12a131ad27fdb9b5ea7cc1f35d872cd43
Reviewed-on: https://boringssl-review.googlesource.com/3230
Reviewed-by: Adam Langley <agl@google.com>
It has no callers in internal code.
Change-Id: I53cf1769b71be6a0441533b6af7d3f64aab5098a
Reviewed-on: https://boringssl-review.googlesource.com/3219
Reviewed-by: Adam Langley <agl@google.com>
We have no use for DTLS renego and it's even more complex than TLS renego.
Change-Id: I8680ab361cc8761dd7fc8dfb1bfe1ff4abc6612f
Reviewed-on: https://boringssl-review.googlesource.com/3218
Reviewed-by: Adam Langley <agl@google.com>
For now, only test reorderings when we always or never fragment messages.
There's a third untested case: when full messages and fragments are mixed. That
will be tested later after making it actually work.
Change-Id: Ic4efb3f5e87b1319baf2d4af31eafa40f6a50fa6
Reviewed-on: https://boringssl-review.googlesource.com/3216
Reviewed-by: Adam Langley <agl@google.com>
Tag number 31 is a long form tag that requires multiple octets. It
cannot be handled by adding a single uint8. Changed CBB_add_asn1()
to return 0 when it is passed in the extension for tag 31.
Change-Id: Ia33936d4f174d1a7176eb11da0b5c7370efb9416
CBS_get_asn1() and CBS_get_any_asn1_element() only support the single
byte ASN.1 identifier octets (aka short form tags). Tag number 31 is
the start of the multi-byte long form per X.690 section 8.1.2.4.
Change-Id: I892600f4946e880a4ff03d219181116ef04f5372
Reviewed-on: https://boringssl-review.googlesource.com/3241
Reviewed-by: Adam Langley <agl@google.com>
CBB_init_fixed() should not call free because it can lead to use after
free or double free bugs. The caller should be responsible for
creating and destroying the buffer.
In the current code, ssl3_get_v2_client_hello() may free s->init_buf->data
via CBB_init_fixed(). It can also be freed via SSL_free(s) since
ssl3_get_v2_client_hello() doesn't set it to NULL and CBB_init_fixed()
can't set the caller's pointer to NULL.
Change-Id: Ia05a67ae25af7eb4fb04f08f20d50d912b41e38b
No behavior change. This is in preparation for buffering a flight of handshake
messages to reorder vigorously on flush.
Change-Id: Ic348829b340bf58d28f332027646559cb11046ac
Reviewed-on: https://boringssl-review.googlesource.com/3215
Reviewed-by: Adam Langley <agl@google.com>
It dates to 2000 from upstream and is only used when serving client auth to
Netscape. It will also get in the way when we get to merging DTLS and TLS
handshake functions because NETSCAPE_HANG_BUG is not valid for DTLS as it is
(the handshake fragmentation code will get confused).
Removing per comment on https://boringssl-review.googlesource.com/#/c/2602/
Change-Id: Ia2d086205bbfed002dc33b2203a47206f373b820
Reviewed-on: https://boringssl-review.googlesource.com/3214
Reviewed-by: Adam Langley <agl@google.com>
All but one field is a no-op.
Change-Id: Ib7bc59a12ce792d5e42fb6e04a4aff54f42643a9
Reviewed-on: https://boringssl-review.googlesource.com/3213
Reviewed-by: Adam Langley <agl@google.com>
This extends the packet adaptor protocol to send three commands:
type command =
| Packet of []byte
| Timeout of time.Duration
| TimeoutAck
When the shim processes a Timeout in BIO_read, it sends TimeoutAck, fails the
BIO_read, returns out of the SSL stack, advances the clock, calls
DTLSv1_handle_timeout, and continues.
If the Go side sends Timeout right between sending handshake flight N and
reading flight N+1, the shim won't read the Timeout until it has sent flight
N+1 (it only processes packet commands in BIO_read), so the TimeoutAck comes
after N+1. Go then drops all packets before the TimeoutAck, thus dropping one
transmit of flight N+1 without having to actually process the packets to
determine the end of the flight. The shim then sees the updated clock, calls
DTLSv1_handle_timeout, and re-sends flight N+1 for Go to process for real.
When dropping packets, Go checks the epoch and increments sequence numbers so
that we can continue to be strict here. This requires tracking the initial
sequence number of the next epoch.
The final Finished message takes an additional special-case to test. DTLS
triggers retransmits on either a timeout or seeing a stale flight. OpenSSL only
implements the former which should be sufficient (and is necessary) EXCEPT for
the final Finished message. If the peer's final Finished message is lost, it
won't be waiting for a message from us, so it won't time out anything. That
retransmit must be triggered on stale message, so we retransmit the Finished
message in Go.
Change-Id: I3ffbdb1de525beb2ee831b304670a3387877634c
Reviewed-on: https://boringssl-review.googlesource.com/3212
Reviewed-by: Adam Langley <agl@google.com>
This reverts commit c67a3ae6ba. With a
deterministic clock, we can now go back to being strict about retransmits. Our
tests will now require that the shim only retransmit when we expect it to.
Change-Id: Iab1deb9665dcd294790c8253d920089e83a9140c
Reviewed-on: https://boringssl-review.googlesource.com/3211
Reviewed-by: Adam Langley <agl@google.com>
This is so the tests needn't be sensitive to the clock. It is, unfortunately, a
test-only hook, but the DTLS retransmit/timeout logic more-or-less requires it
currently. Use this hook to, for now, freeze the clock at zero. This makes the
tests deterministic.
It might be worth designing a saner API in the future. The current one,
notably, requires that the caller's clock be compatible with the one we
internally use. It's also not clear whether the caller needs to call
DTLSv1_handle_timeout or can just rely on the state machine doing it internally
(as it does do). But mock clocks are relatively tame and WebRTC wants to
compile against upstream OpenSSL for now, so we're limited in how much new API
we can build.
Change-Id: I7aad51570596f69275ed0fc1a8892393e4b7ba13
Reviewed-on: https://boringssl-review.googlesource.com/3210
Reviewed-by: Adam Langley <agl@google.com>
When addressing [1], I checked the AEAD code but brain-farted: a key is
aligned in that code, but it's the Poly1305 key, which doesn't matter
here.
It would be nice to align the ChaCha key too, but Android doesn't have
|posix_memalign| in the versions that we care about. It does have
|memalign|, but that's documented as "obsolete" and we don't have a
concept of an Android OS yet and I don't want to add one just for this.
So this change uses the buffer for loading the key again.
(Note that we never used to check for alignment of the |key| before
calling this. We must have gotten it for free somehow when checking the
alignment of |in| and |out|. But there are clearly some paths that don't
have an aligned key:
https://code.google.com/p/chromium/issues/detail?id=454308.)
At least the generation script started paying off immediately ☺.
[1] https://boringssl-review.googlesource.com/#/c/3132/1/crypto/chacha/chacha_vec.c@185
Change-Id: I4f893ba0733440fddd453f9636cc2aeaf05076ed
Reviewed-on: https://boringssl-review.googlesource.com/3270
Reviewed-by: Adam Langley <agl@google.com>
Thanks to an anonymous bug report.
Change-Id: Icdde78c82c8ee13fb64e0124712b240295677f63
Reviewed-on: https://boringssl-review.googlesource.com/3260
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
Android didn't have getauxval until Jelly Bean (4.1). This means that
BoringSSL running on older Androids won't be able to detect NEON
support. (This is moot for Chromium because Chromium calls
android_getCpuFeatures and sets the NEON flag itself, but other users of
BoringSSL on Android probably won't do that.)
This change mirrors a little of what upstream does and tries running a
NEON instruction with a handler for SIGILL installed.
Change-Id: I853b85c37ffb049b240582d71fcf07adedc37a30
Reviewed-on: https://boringssl-review.googlesource.com/3190
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
Including string.h in base.h causes any file that includes a BoringSSL
header to include string.h. Generally this wouldn't be a problem,
although string.h might slow down the compile if it wasn't otherwise
needed. However, it also causes problems for ipsec-tools in Android
because OpenSSL didn't have this behaviour.
This change removes string.h from base.h and, instead, adds it to each
.c file that requires it.
Change-Id: I5968e50b0e230fd3adf9b72dd2836e6f52d6fb37
Reviewed-on: https://boringssl-review.googlesource.com/3200
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
|num_rounds| is neither a parameter nor manifest constant.
Change-Id: I6c1d3a3819731f53fdd01eef6bb4de8a45176a1d
Reviewed-on: https://boringssl-review.googlesource.com/3180
Reviewed-by: Adam Langley <agl@google.com>
Obviously I shouldn't be doing this by hand each time.
Change-Id: I64e3f5ede5c47eddbff3b18172a95becc681b486
Reviewed-on: https://boringssl-review.googlesource.com/3170
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
I put the header back, but missed the #endif at the end of the file.
Regenerating this is clearly too error prone – I'll write a script to do
it for the future.
Change-Id: I06968c9f7a4673f5942725e727c67cb4e01d361a
A handful of latin-1 codepoints existed a trio of files. This change
switches the encoding to UTF-8.
Change-Id: I00309e4d1ee3101e0cc02abc53196eafa17a4fa5
The special-case in HMAC is no longer needed. Test that HMAC_CTX is initialized
with the zero key.
Change-Id: I4ee2b495047760765c7d7fdfb4ccb510723aa263
Reviewed-on: https://boringssl-review.googlesource.com/3121
Reviewed-by: Adam Langley <agl@google.com>
By copying the input and output data via an aligned buffer, the
alignment requirements for the NEON ChaCha implementation on ARM can be
eliminted. This does, however, reduce the speed when aligned buffers are
used. However, updating the GCC version used to generate the ASM more
than makes up for that.
On a SnapDragon 801 (OnePlus One) the aligned speed was 214.6 MB/s and
the unaligned speed was 112.1 MB/s. Now both are 218.4 MB/s. A Nexus 7
also shows a slight speed up.
Change-Id: I68321ba56767fa5354b31a1491a539b299236e9a
Reviewed-on: https://boringssl-review.googlesource.com/3132
Reviewed-by: Adam Langley <agl@google.com>
This avoids having Windows be different and is also easier for testing
because it's a simple matter to unalign the pointer if needed.
Change-Id: I32cfa5834e3fe4f16304a25092b9c71946d4744d
Reviewed-on: https://boringssl-review.googlesource.com/3131
Reviewed-by: Adam Langley <agl@google.com>
This avoids a conflict with the Chromium build system, which
defines WIN32_LEAN_AND_MEAN with a different value.
BUG=crbug.com/453196
Change-Id: Ia15ec7c20325c1961af4f32e5208266e5f846f35
Reviewed-on: https://boringssl-review.googlesource.com/3150
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
Avoid "warning C4530: C++ exception handler used, but unwind semantics
are not enabled. Specify /EHsc" when compiling MSVC's <xlocale> by
disabling the exception code in MSVC's STL using _HAS_EXCEPTIONS=0.
Change-Id: I75aeb445d58cc9fb44467a6044386ae6b519cca8
Reviewed-on: https://boringssl-review.googlesource.com/3111
Reviewed-by: Adam Langley <agl@google.com>
The variable switches the default type for add_library from STATIC to SHARED.
We can condition additional stuff on that for convenience. (tabtest still
doesn't build.)
BoringSSL as any kind of stable system shared library is still very much
unsupported, but this is probably handy for making sure we don't forget all
those pesky OPENSSL_EXPORTs.
Change-Id: I66ab80bcddbf3724e03e85384141fdf4f4acbc2e
Reviewed-on: https://boringssl-review.googlesource.com/3092
Reviewed-by: Adam Langley <agl@google.com>
Forgot to export those when adding them.
Change-Id: I206f488eb38e5ff55b8c212911aced0cf28b7664
Reviewed-on: https://boringssl-review.googlesource.com/3090
Reviewed-by: Adam Langley <agl@google.com>
