Hopefully this can be replaced with a standard library version later.
BUG=571231
Change-Id: I61ae1d9d057c6d9e1b92128042109758beccc7ff
Reviewed-on: https://boringssl-review.googlesource.com/6776
Reviewed-by: Adam Langley <agl@google.com>
We don't live in a workspace, but relative import paths exist, so we
don't have to modify the modules we bundle to avoid naming collisions.
Change-Id: Ie7c70dbc4bb0485421814d40b6a6bd5f140e1d29
Reviewed-on: https://boringssl-review.googlesource.com/6781
Reviewed-by: Adam Langley <agl@google.com>
It already wasn't in the default list and no one enables it. Remove it
altogether. (It's also gone from the current TLS 1.3 draft.)
Change-Id: I143d07d390d186252204df6bdb8ffd22649f80e3
Reviewed-on: https://boringssl-review.googlesource.com/6775
Reviewed-by: Adam Langley <agl@google.com>
In doing so, make the asynchronous portion look more like
ssl3_send_server_key_exchange. This is a considerably simpler structure,
so the save/resume doesn't need any state.
Mostly this means writing out the signature algorithm can now go through
CBB rather than a uint8_t* without bounds check.
Change-Id: If99fcffd0d41a84514c3d23034062c582f1bccb2
Reviewed-on: https://boringssl-review.googlesource.com/6771
Reviewed-by: Adam Langley <agl@google.com>
The MSVC build is failing with:
ssl\s3_srvr.c(1363) : warning C4701: potentially uninitialized local variable 'digest_len' used
I don't believe that this warning is valid, but this change assigns a
value to |digest_len| to fix the build.
Change-Id: I20107a932bc16c880032cc1a57479b1a806aa8ea
Reviewed-on: https://boringssl-review.googlesource.com/6821
Reviewed-by: Adam Langley <agl@google.com>
There is some messiness around saving and restoring the CBB, but this is
still significantly clearer.
Note that the BUF_MEM_grow line is gone in favor of a fixed CBB like the
other functions ported thus far. This line was never necessary as
init_buf is initialized to 16k and none of our key exchanges get that
large. (The largest one can get is DHE_RSA. Even so, it'd take a roughly
30k-bit DH group with a 30k-bit RSA key.)
Having such limits and tight assumptions on init_buf's initial size is
poor (but on par for the old code which usually just blindly assumed the
message would not get too large) and the size of the certificate chain
is much less obviously bounded, so those BUF_MEM_grows can't easily go.
My current plan is convert everything but those which legitimately need
BUF_MEM_grow to CBB, then atomically convert the rest, remove init_buf,
and switch everything to non-fixed CBBs. This will hopefully also
simplify async resumption. In the meantime, having a story for
resumption means the future atomic change is smaller and, more
importantly, relieves some complexity budget in the ServerKeyExchange
code for adding Curve25519.
Change-Id: I1de6af9856caaed353453d92a502ba461a938fbd
Reviewed-on: https://boringssl-review.googlesource.com/6770
Reviewed-by: Adam Langley <agl@google.com>
Apple these days ships lldb without gdb. Teach runner how to launch it
too.
Change-Id: I25f845f84f1c87872a9e3bc4b7fe3e7344e8c1f7
Reviewed-on: https://boringssl-review.googlesource.com/6769
Reviewed-by: Adam Langley <agl@google.com>
Functions which take a BN_CTX also accept NULL. Allocating a BN_CTX is
only useful if doing multiple operations, which we aren't.
Change-Id: Ib31113f214707cce6283e090ded0bf93ae5e7c12
Reviewed-on: https://boringssl-review.googlesource.com/6768
Reviewed-by: Adam Langley <agl@google.com>
This relieves some complexity budget for adding Curve25519 to this
code.
This also adds a BN_bn2cbb_padded helper function since this seems to be a
fairly common need.
Change-Id: Ied0066fdaec9d02659abd6eb1a13f33502c9e198
Reviewed-on: https://boringssl-review.googlesource.com/6767
Reviewed-by: Adam Langley <agl@google.com>
This function may fail on malloc error.
Change-Id: I8631b1763dac5a3801fcaca81bdfcb8d24d3728c
Reviewed-on: https://boringssl-review.googlesource.com/6765
Reviewed-by: Adam Langley <agl@google.com>
This check was fixed a while ago, but it could have been much simpler.
In the RSA key exchange, the expected size of the output is known, making the
padding check much simpler. There isn't any use in exporting the more general
RSA_message_index_PKCS1_type_2. (Without knowing the expected size, any
integrity check or swap to randomness or other mitigation is basically doomed
to fail.)
Verified with the valgrind uninitialized memory trick that we're still
constant-time.
Also update rsa.h to recommend against using the PKCS#1 v1.5 schemes.
Thanks to Ryan Sleevi for the suggestion.
Change-Id: I4328076b1d2e5e06617dd8907cdaa702635c2651
Reviewed-on: https://boringssl-review.googlesource.com/6613
Reviewed-by: Adam Langley <agl@google.com>
Only ECDHE-based ciphers are implemented. To ease the transition, the
pre-standard cipher shares a name with the standard one. The cipher rule parser
is hacked up to match the name to both ciphers. From the perspective of the
cipher suite configuration language, there is only one cipher.
This does mean it is impossible to disable the old variant without a code
change, but this situation will be very short-lived, so this is fine.
Also take this opportunity to make the CK and TXT names align with convention.
Change-Id: Ie819819c55bce8ff58e533f1dbc8bef5af955c21
Reviewed-on: https://boringssl-review.googlesource.com/6686
Reviewed-by: Adam Langley <agl@google.com>
This will be used to test the C implementation against.
Change-Id: I2d396d27630937ea610144e381518eae76f78dab
Reviewed-on: https://boringssl-review.googlesource.com/6685
Reviewed-by: Adam Langley <agl@google.com>
In preparation for a Go implementation of the new TLS ciphers to test
against, implement the AEAD primitive.
Change-Id: I69b5b51257c3de16bdd36912ed2bc9d91ac853c8
Reviewed-on: https://boringssl-review.googlesource.com/6684
Reviewed-by: Adam Langley <agl@google.com>
In preparation for implementing the RFC 7539 variant to test against.
Change-Id: I0ce5e856906e00925ad1d849017f9e7fda087a8e
Reviewed-on: https://boringssl-review.googlesource.com/6683
Reviewed-by: Adam Langley <agl@google.com>
dh_tmp can only contain parameters, now that DHE always generates keys fresh
for each connection.
Change-Id: I56dad4cbec7e21326360d79df211031fd9734004
Reviewed-on: https://boringssl-review.googlesource.com/6702
Reviewed-by: Adam Langley <agl@google.com>
Rather than the length of the top-level CBB, which is kind of odd when ASN.1
length prefixes are not yet determined, return the number of bytes written to
the CBB so far. This can be computed without increasing the size of CBB at all.
Have offset and pending_*.
This means functions which take in a CBB as argument will not be sensitive to
whether the CBB is a top-level or child CBB. The extensions logic had to be
careful to only ever compare differences of lengths, which was awkward.
The reversal will also allow for the following pattern in the future, once
CBB_add_space is split into, say, CBB_reserve and CBB_did_write and we add a
CBB_data:
uint8_t *signature;
size_t signature_len = 0;
if (!CBB_add_asn1(out, &cert, CBB_ASN1_SEQUENCE) ||
/* Emit the TBSCertificate. */
!CBB_add_asn1(&cert, &tbs_cert, CBS_ASN1_SEQUENCE) ||
!CBB_add_tbs_cert_stuff(&tbs_cert, stuff) ||
!CBB_flush(&cert) ||
/* Feed it into md_ctx. */
!EVP_DigestSignInit(&md_ctx, NULL, EVP_sha256(), NULL, pkey) ||
!EVP_DigestSignUpdate(&md_ctx, CBB_data(&cert), CBB_len(&cert)) ||
/* Emit the signature algorithm. */
!CBB_add_asn1(&cert, &sig_alg, CBS_ASN1_SEQUENCE) ||
!CBB_add_sigalg_stuff(&sig_alg, other_stuff) ||
/* Emit the signature. */
!EVP_DigestSignFinal(&md_ctx, NULL, &signature_len) ||
!CBB_reserve(&cert, &signature, signature_len) ||
!EVP_DigestSignFinal(&md_ctx, signature, &signature_len) ||
!CBB_did_write(&cert, signature_len)) {
goto err;
}
(Were TBSCertificate not the first field, we'd still have to sample
CBB_len(&cert), but at least that's reasonable straight-forward. The
alternative would be if CBB_data and CBB_len somehow worked on
recently-invalidated CBBs, but that would go wrong once the invalidated CBB's
parent flushed and possibly shifts everything.)
And similar for signing ServerKeyExchange.
Change-Id: I7761e492ae472d7632875b5666b6088970261b14
Reviewed-on: https://boringssl-review.googlesource.com/6681
Reviewed-by: Adam Langley <agl@google.com>
We can slightly simplify tls1_P_hash. (Confirmed md32_common.h emits
code with the check.)
Change-Id: I0293ceaaee261a7ac775b42a639f7a9f67705456
Reviewed-on: https://boringssl-review.googlesource.com/6647
Reviewed-by: Adam Langley <agl@google.com>
It is redundant given the other state in the connection.
Change-Id: I5dc71627132659ab4316a5ea360c9ca480fb7c6c
Reviewed-on: https://boringssl-review.googlesource.com/6646
Reviewed-by: Adam Langley <agl@google.com>
There's no need to track consumed bytes, so rr->data and rr->off may be
merged together.
Change-Id: I8842d005665ea8b4d4a0cced941f3373872cdac4
Reviewed-on: https://boringssl-review.googlesource.com/6644
Reviewed-by: Adam Langley <agl@google.com>
This uses ssl3_read_bytes for now. We still need to dismantle that
function and then invert the handshake state machine, but this gets
things closer to the right shape as an intermediate step and is a large
chunk in itself. It simplifies a lot of the CCS/handshake
synchronization as a lot of the invariants much more clearly follow from
the handshake itself.
Tests need to be adjusted since this changes some error codes. Now all
the CCS/Handshake checks fall through to the usual
SSL_R_UNEXPECTED_RECORD codepath. Most of what used to be a special-case
falls out naturally. (If half of Finished was in the same record as the
pre-CCS message, that part of the handshake record would have been left
unconsumed, so read_change_cipher_spec would have noticed, just like
read_app_data would have noticed.)
Change-Id: I15c7501afe523d5062f0e24a3b65f053008d87be
Reviewed-on: https://boringssl-review.googlesource.com/6642
Reviewed-by: Adam Langley <agl@google.com>
With server-side renegotiation gone, handshake_fragment's only purpose
in life is to handle a fragmented HelloRequest (we probably do need to
support those if some server does 1/n-1 record-splitting on handshake
records). The logic to route the data into
ssl3_read_bytes(SSL3_RT_HANDSHAKE) never happens, and the contents are
always a HelloRequest prefix.
This also trims a tiny bit of per-connection state.
Change-Id: Ia1b0dda5b7e79d817c28da1478640977891ebc97
Reviewed-on: https://boringssl-review.googlesource.com/6641
Reviewed-by: Adam Langley <agl@google.com>
Sometimes BadRSAClientKeyExchange-1 fails with DATA_TOO_LARGE_FOR_MODULUS if
the corruption brings the ciphertext above the RSA modulus. Ensure this does
not happen.
Change-Id: I0d8ea6887dfcab946fdf5d38f5b196f5a927c4a9
Reviewed-on: https://boringssl-review.googlesource.com/6731
Reviewed-by: Adam Langley <agl@google.com>
This callback is never used. The one caller I've ever seen is in Android
code which isn't built with BoringSSL and it was a no-op.
It also doesn't actually make much sense. A callback cannot reasonably
assume that it sees every, say, SSL_CTX created because the index may be
registered after the first SSL_CTX is created. Nor is there any point in
an EX_DATA consumer in one file knowing about an SSL_CTX created in
completely unrelated code.
Replace all the pointers with a typedef to int*. This will ensure code
which passes NULL or 0 continues to compile while breaking code which
passes an actual function.
This simplifies some object creation functions which now needn't worry
about CRYPTO_new_ex_data failing. (Also avoids bouncing on the lock, but
it's taking a read lock, so this doesn't really matter.)
BUG=391192
Change-Id: I02893883c6fa8693682075b7b130aa538a0a1437
Reviewed-on: https://boringssl-review.googlesource.com/6625
Reviewed-by: Adam Langley <agl@google.com>
Then deprecate the old functions. Thanks to upstream's
6977e8ee4a718a76351ba5275a9f0be4e530eab5 for the idea.
Change-Id: I916abd6fca2a3b2a439ec9902d9779707f7e41eb
Reviewed-on: https://boringssl-review.googlesource.com/6622
Reviewed-by: Adam Langley <agl@google.com>
It has no callers. I prepped for its removal earlier with
c05697c2c5
and then completely forgot.
Thanks to upstream's 6f78b9e824c053d062188578635c575017b587c5 for
the reminder. Quoth them:
> This only gets used to set a specific curve without actually checking
> that the peer supports it or not and can therefor result in handshake
> failures that can be avoided by selecting a different cipher.
It's also a very confusing API since it does NOT pass ownership of the
EC_KEY to the caller.
Change-Id: I6a00643b3a2d6746e9e0e228b47c2bc9694b0084
Reviewed-on: https://boringssl-review.googlesource.com/6621
Reviewed-by: Adam Langley <agl@google.com>
Cover not just the wrong version, but also other mistakes.
Change-Id: I46f05a9a37b7e325adc19084d315a415777d3a46
Reviewed-on: https://boringssl-review.googlesource.com/6610
Reviewed-by: Adam Langley <agl@google.com>
This is a remnant of ssl3_get_client_hello's old DTLS cookie logic, which has
since been removed. (If we ever need HelloVerifyRequest support on the server,
we'll implement something stateless in front.) We can switch this to something
more straightforward now.
See also upstream's 94f98a9019e1c0a3be4ca904b2c27c7af3d937c0,
Change-Id: Ie733030209a381a4915d6744fa12a79ffe972fa5
Reviewed-on: https://boringssl-review.googlesource.com/6601
Reviewed-by: Adam Langley <agl@google.com>
I don't think we're ever going to manage to enforce this, and it doesn't
seem worth the trouble. We don't support application protocols which use
renegotiation outside of the HTTP/1.1 mid-stream client auth hack.
There, it's on the server to reject legacy renegotiations.
This removes the last of SSL_OP_ALL.
Change-Id: I996fdeaabf175b6facb4f687436549c0d3bb0042
Reviewed-on: https://boringssl-review.googlesource.com/6580
Reviewed-by: Adam Langley <agl@google.com>
RFC 5746 forbids a server from downgrading or upgrading
renegotiation_info support. Even with SSL_OP_LEGACY_SERVER_CONNECT set
(the default), we can still enforce a few things.
I do not believe this has practical consequences. The attack variant
where the server half is prefixed does not involve a renegotiation on
the client. The converse where the client sees the renegotiation and
prefix does, but we only support renego for the mid-stream HTTP/1.1
client auth hack, which doesn't do this. (And with triple-handshake,
HTTPS clients should be requiring the certificate be unchanged across
renego which makes this moot.)
Ultimately, an application which makes the mistake of using
renegotiation needs to be aware of what exactly that means and how to
handle connection state changing mid-stream. We make renego opt-in now,
so this is a tenable requirement.
(Also the legacy -> secure direction would have been caught by the
server anyway since we send a non-empty RI extension.)
Change-Id: I915965c342f8a9cf3a4b6b32f0a87a00c3df3559
Reviewed-on: https://boringssl-review.googlesource.com/6559
Reviewed-by: Adam Langley <agl@google.com>
This dates to SSLeay 0.8.0 (or earlier). The use counter sees virtually
no hits.
Change-Id: Iff4c8899d5cb0ba4afca113c66d15f1d980ffe41
Reviewed-on: https://boringssl-review.googlesource.com/6558
Reviewed-by: Adam Langley <agl@google.com>
This dates to SSLeay 0.9.0. The Internet seems to have completely
forgotten what "D5" is. (I can't find reference to it beyond
documentation of this quirk.) The use counter we added sees virtually no
hits.
Change-Id: I9781d401acb98ce3790b1b165fc257a6f5e9b155
Reviewed-on: https://boringssl-review.googlesource.com/6557
Reviewed-by: Adam Langley <agl@google.com>
At least for newlib (Native Client) including sys/types.h
is not enough to get a timeval declaration.
Change-Id: I4971a1aacc80b6fdc12c0e81c5d8007ed13eb8b7
Reviewed-on: https://boringssl-review.googlesource.com/6722
Reviewed-by: Adam Langley <agl@google.com>
BUG=webrtc:5222
Change-Id: I8399bd595564dedbe5492b8ea6eb915f41367cbf
Reviewed-on: https://boringssl-review.googlesource.com/6690
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: David Benjamin <davidben@google.com>
yaSSL has a couple of bugs in their DH client implementation. This
change works around the worst of the two.
Firstly, they expect the the DH public value to be the same length as
the prime. This change pads the public value as needed to ensure this.
Secondly, although they handle the first byte of the shared key being
zero, they don't handle the case of the second, third, etc bytes being
zero. So whenever that happens the handshake fails. I don't think that
there's anything that we can do about that one.
Change-Id: I789c9e5739f19449473305d59fe5c3fb9b4a6167
Reviewed-on: https://boringssl-review.googlesource.com/6578
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
Right now your options are:
- Bounce on a reference and deal with cleanup needlessly.
- Manually check the type tag and peek into the union.
We probably have no hope of opaquifying this struct, but for new code, let's
recommend using this function rather than the more error-prone thing.
Change-Id: I9b39ff95fe4264a3f7d1e0d2894db337aa968f6c
Reviewed-on: https://boringssl-review.googlesource.com/6551
Reviewed-by: Adam Langley <agl@google.com>
clang-format packing them tightly made newlines inconsistent which
wasn't very helpful.
Change-Id: I46a787862ed1f5b0eee101394e24c779b6bc652b
Reviewed-on: https://boringssl-review.googlesource.com/6517
Reviewed-by: Adam Langley <agl@google.com>
Trim the cipher table further. Those values are entirely determined by
algorithm_enc.
Change-Id: I355c245b0663e41e54e62d15903a4a9a667b4ffe
Reviewed-on: https://boringssl-review.googlesource.com/6516
Reviewed-by: Adam Langley <agl@google.com>
FIPS is the same as HIGH (but for CHACHA20), so those are redundant.
Likewise, MEDIUM vs HIGH was just RC4. Remove those in favor of
redefining those legacy rules to mean this.
One less field to keep track of in each cipher.
Change-Id: I2b2489cffb9e16efb0ac7d7290c173cac061432a
Reviewed-on: https://boringssl-review.googlesource.com/6515
Reviewed-by: Adam Langley <agl@google.com>
It's redundant with other cipher properties. We can express these in code.
Cipher rule matching gets a little bit complicated due to the confusing legacy
protocol version cipher rules, so add some tests for it. (It's really hard to
grep for uses of them, so I've kept them working to be safe.)
Change-Id: Ic6b3fcd55d76d4a51b31bf7ae629a2da50a7450e
Reviewed-on: https://boringssl-review.googlesource.com/6453
Reviewed-by: Adam Langley <agl@google.com>
The keylog BIO is internally synchronized by the SSL_CTX lock, but an
application may wish to log keys from multiple SSL_CTXs. This is in
preparation for switching Chromium to use a separate SSL_CTX per profile
to more naturally split up the session caches.
It will also be useful for routing up SSLKEYLOGFILE in WebRTC. There,
each log line must be converted to an IPC up from the renderer
processes.
This will require changes in Chromium when we roll BoringSSL.
BUG=458365,webrtc:4417
Change-Id: I2945bdb4def0a9c36e751eab3d5b06c330d66b54
Reviewed-on: https://boringssl-review.googlesource.com/6514
Reviewed-by: Adam Langley <agl@google.com>
Change-Id: I3072f884be77b8646e90d316154b96448f0cf2a1
Reviewed-on: https://boringssl-review.googlesource.com/6520
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
