There's not much point in putting those in the interface as the
final_finished_mac implementation is itself different between SSL 3.0
and TLS.
Change-Id: I76528a88d255c451ae008f1a34e51c3cb57d3073
Reviewed-on: https://boringssl-review.googlesource.com/6838
Reviewed-by: Adam Langley <alangley@gmail.com>
It's the same between TLS and SSL 3.0. There's also no need for the
do_change_cipher_spec wrapper (it no longer needs checks to ensure it
isn't called at a bad place). Finally fold the setup_key_block call into
change_cipher_spec.
Change-Id: I7917f48e1a322f5fbafcf1dfb8ad53f66565c314
Reviewed-on: https://boringssl-review.googlesource.com/6834
Reviewed-by: Adam Langley <alangley@gmail.com>
Doing it at ChangeCipherSpec makes it be set twice and, more
importantly, causes us to touch SSL_SESSION objects on resumption. (With
a no-op change, but this still isn't a good idea.)
This should actually let us get rid of ssl->s3->tmp.new_cipher but some
of external code accesses that field directly.
Change-Id: Ia6b7e0964c1b430f963ad0b1a5417b339b7b19d3
Reviewed-on: https://boringssl-review.googlesource.com/6833
Reviewed-by: Adam Langley <alangley@gmail.com>
That we're half and half is really confusing.
Change-Id: I1c2632682e8a3e63d01dada8e0eb3b735ff709ce
Reviewed-on: https://boringssl-review.googlesource.com/6785
Reviewed-by: Adam Langley <agl@google.com>
This uses ssl3_read_bytes for now. We still need to dismantle that
function and then invert the handshake state machine, but this gets
things closer to the right shape as an intermediate step and is a large
chunk in itself. It simplifies a lot of the CCS/handshake
synchronization as a lot of the invariants much more clearly follow from
the handshake itself.
Tests need to be adjusted since this changes some error codes. Now all
the CCS/Handshake checks fall through to the usual
SSL_R_UNEXPECTED_RECORD codepath. Most of what used to be a special-case
falls out naturally. (If half of Finished was in the same record as the
pre-CCS message, that part of the handshake record would have been left
unconsumed, so read_change_cipher_spec would have noticed, just like
read_app_data would have noticed.)
Change-Id: I15c7501afe523d5062f0e24a3b65f053008d87be
Reviewed-on: https://boringssl-review.googlesource.com/6642
Reviewed-by: Adam Langley <agl@google.com>
TLS resets it in t1_enc.c while DTLS has it sprinkled everywhere.
Change-Id: I78f0f0e646b4dc82a1058199c4b00f2e917aa5bc
Reviewed-on: https://boringssl-review.googlesource.com/6511
Reviewed-by: Adam Langley <agl@google.com>
This was a mistake from when we added async CertificateVerify support.
No test because the final state of each write state is semi-unreachable
due to the buffer BIO that gets installed on each handshake.
Change-Id: I0180926522113c8b1ca58b8c9c6dc37fb0dd8083
Reviewed-on: https://boringssl-review.googlesource.com/6412
Reviewed-by: Adam Langley <agl@google.com>
Although the DTLS transport layer logic drops failed writes on the floor, it is
actually set up to work correctly. If an SSL_write fails at the transport,
dropping the buffer is fine. Arguably it works better than in TLS because we
don't have the weird "half-committed to data" behavior. Likewise, the handshake
keeps track of how far its gotten and resumes the message at the right point.
This broke when the buffering logic was rewritten because I didn't understand
what the DTLS code was doing. The one thing that doesn't work as one might
expect is non-fatal write errors during rexmit are not recoverable. The next
timeout must fire before we try again.
This code is quite badly sprinkled in here, so add tests to guard it against
future turbulence. Because of the rexmit issues, the tests need some hacks
around calls which may trigger them. It also changes the Go DTLS implementation
from being completely strict about sequence numbers to only requiring they be
monotonic.
The tests also revealed another bug. This one seems to be upstream's fault, not
mine. The logic to reset the handshake hash on the second ClientHello (in the
HelloVerifyRequest case) was a little overenthusiastic and breaks if the
ClientHello took multiple tries to send.
Change-Id: I9b38b93fff7ae62faf8e36c4beaf848850b3f4b9
Reviewed-on: https://boringssl-review.googlesource.com/6417
Reviewed-by: Adam Langley <agl@google.com>
This callback is some combination of arguably useful stuff (bracket
handshakes, alerts) and completely insane things (find out when the
state machine advances). Deprecate the latter.
Change-Id: Ibea5b32cb360b767b0f45b302fd5f1fe17850593
Reviewed-on: https://boringssl-review.googlesource.com/6305
Reviewed-by: Adam Langley <alangley@gmail.com>
ssl.h should be first. Also two lines after includes and the rest of the
file.
Change-Id: Icb7586e00a3e64170082c96cf3f8bfbb2b7e1611
Reviewed-on: https://boringssl-review.googlesource.com/5892
Reviewed-by: Adam Langley <agl@google.com>
Applications may require the stapled OCSP response in order to verify
the certificate within the verification callback.
Change-Id: I8002e527f90c3ce7b6a66e3203c0a68371aac5ec
Reviewed-on: https://boringssl-review.googlesource.com/5730
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
The handshake hash is initialized from the buffer as soon as the cipher
is known. When adding a message to the transcript, independently update
the buffer and rolling hash, whichever is active. This avoids the
complications around dont_free_handshake_buffer and EMS.
BUG=492371
Change-Id: I3b1065796a50fd1be5d42ead7210c2f253ef0aca
Reviewed-on: https://boringssl-review.googlesource.com/5615
Reviewed-by: Adam Langley <agl@google.com>
Most of the logic was redundant with checks already made in
ssl3_get_server_certificate. The DHE check was missing an ECDHE half
(and was impossible). The ECDSA check allowed an ECDSA certificate for
RSA. The only non-redundant check was a key usage check which,
strangely, is only done for ECDSA ciphers.
(Although this function called X509_certificate_type and checked sign
bits, those bits in X509_certificate_type are purely a function of the
key type and don't do anything.)
Change-Id: I8df7eccc0ffff49e4cfd778bd91058eb253b13cb
Reviewed-on: https://boringssl-review.googlesource.com/5047
Reviewed-by: Adam Langley <agl@google.com>
It's never called and the state is meaningless now.
Change-Id: I5429ec3eb7dc2b789c0584ea88323f0ff18920ae
Reviewed-on: https://boringssl-review.googlesource.com/4826
Reviewed-by: Adam Langley <agl@google.com>
The only case where renego is supported is if we are a client and the
server sends a HelloRequest. That is still needed to support the renego
+ client auth hack in Chrome. Beyond that, no other forms of renego will
work.
The messy logic where the handshake loop is repurposed to send
HelloRequest and the extremely confusing tri-state s->renegotiate (which
makes SSL_renegotiate_pending a lie during the initial handshake as a
server) are now gone. The next change will further simplify things by
removing ssl->s3->renegotiate and the renego deferral logic. There's
also some server-only renegotiation checks that can go now.
Also clean up ssl3_read_bytes' HelloRequest handling. The old logic relied on
the handshake state machine to reject bad HelloRequests which... actually that
code probably lets you initiate renego by sending the first four bytes of a
ServerHello and expecting the peer to read it later.
BUG=429450
Change-Id: Ie0f87d0c2b94e13811fe8e22e810ab2ffc8efa6c
Reviewed-on: https://boringssl-review.googlesource.com/4824
Reviewed-by: Adam Langley <agl@google.com>
This cuts down on one config knob as well as one case in the renego
combinatorial explosion. Since the only case we care about with renego
is the client auth hack, there's no reason to ever do resumption.
Especially since, no matter what's in the session cache:
- OpenSSL will only ever offer the session it just established,
whether or not a newer one with client auth was since established.
- Chrome will never cache sessions created on a renegotiation, so
such a session would never make it to the session cache.
- The new_session + SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION
logic had a bug where it would unconditionally never offer tickets
(but would advertise support) on renego, so any server doing renego
resumption against an OpenSSL-derived client must not support
session tickets.
This also gets rid of s->new_session which is now pointless.
BUG=429450
Change-Id: I884bdcdc80bff45935b2c429b4bbc9c16b2288f8
Reviewed-on: https://boringssl-review.googlesource.com/4732
Reviewed-by: Adam Langley <agl@google.com>
There's multiple different versions of this check, between
s->s3->have_version (only works at some points), s->new_session (really
weird and not actually right), s->renegotiate (fails on the server
because it's always 2 after ClientHello), and s->s3->tmp.finish_md_len
(super confusing). Add an explicit bit with clear meaning. We'll prune
some of the others later; notably s->renegotiate can go away when
initiating renegotiation is removed.
This also tidies up the extensions to be consistent about whether
they're allowed during renego:
- ALPN failed to condition when accepting from the server, so even
if the client didn't advertise, the server could.
- SCTs now *are* allowed during renego. I think forbidding it was a
stray copy-paste. It wasn't consistently enforced in both ClientHello
and ServerHello, so the server could still supply it. Moreover, SCTs
are part of the certificate, so we should accept it wherever we accept
certificates, otherwise that session's state becomes incomplete. This
matches OCSP stapling. (NB: Chrome will never insert a session created
on renego into the session cache and won't accept a certificate
change, so this is moot anyway.)
Change-Id: Ic9bd1ebe2a2dbe75930ed0213bf3c8ed8170e251
Reviewed-on: https://boringssl-review.googlesource.com/4730
Reviewed-by: Adam Langley <agl@google.com>
Nothing should call ssl3_setup_read_buffer or ssl3_setup_write_buffer unless it
intends to write into the buffer. This way buffer management can later be an
implementation detail of the record layer.
Change-Id: Idb0effba00e77c6169764843793f40ec37868b61
Reviewed-on: https://boringssl-review.googlesource.com/4687
Reviewed-by: Adam Langley <agl@google.com>
The rest of ssl/ still includes things everywhere, but this at least fixes the
includes that were implicit from ssl/internal.h.
Change-Id: I7ed22590aca0fe78af84fd99a3e557f4b05f6782
Reviewed-on: https://boringssl-review.googlesource.com/4281
Reviewed-by: Adam Langley <agl@google.com>
Match the other internal headers.
Change-Id: Iff7e2dd06a1a7bf993053d0464cc15638ace3aaa
Reviewed-on: https://boringssl-review.googlesource.com/4280
Reviewed-by: Adam Langley <agl@google.com>
Within the library, only ssl_update_cache read them, so add a dedicated field
to replace that use.
The APIs have a handful of uninteresting callers so I've left them in for now,
but they now always return zero.
Change-Id: Ie4e36fd4ab18f9bff544541d042bf3c098a46933
Reviewed-on: https://boringssl-review.googlesource.com/4101
Reviewed-by: Adam Langley <agl@google.com>
These were added in upstream's 7e159e0133d28bec9148446e8f4dd86c0216d819 for
SCTP. As far as I can tell, they were a no-op there too. The corresponding RT
ticket makes no mention of them.
SSL_get_error checks the retry flags of the BIO already. Specifically it checks
BIO_should_read and BIO_should_write, but those two automatically set
BIO_should_retry.
(Minor, but I noticed them idly. One less thing to think about when the state
machines finally unify.)
Change-Id: I17a956a51895fba383063dee574e0fbe3209f9b0
Reviewed-on: https://boringssl-review.googlesource.com/3560
Reviewed-by: Adam Langley <agl@google.com>
This change has no semantic effect (I hope!). It's just a reformatting
of a few files in ssl/. This is just a start – the other files in ssl/
should follow in the coming days.
Change-Id: I5eb3f4b18d0d46349d0f94d3fe5ab2003db5364e
SSL3_ENC_METHOD will remain version-specific while SSL_METHOD will become
protocol-specific. This finally removes all the version-specific portions of
SSL_METHOD but the version tag itself.
(SSL3_ENC_METHOD's version-specific bits themselves can probably be handled by
tracking a canonicalized protocol version. It would simplify version
comparisons anyway. The one catch is SSLv3 has a very different table. But
that's a cleanup for future. Then again, perhaps a version-specific method
table swap somewhere will be useful later for TLS 1.3.)
Much of this commit was generated with sed invocation:
s/method->ssl3_enc/enc_method/g
Change-Id: I2b192507876aadd4f9310240687e562e56e6c0b1
Reviewed-on: https://boringssl-review.googlesource.com/2581
Reviewed-by: Adam Langley <agl@google.com>
These may as well be replaced with assertions. Get them out of the way of the
initialization.
Change-Id: Ie4ab8bdc018e4a1def7d3f6b3b172a77896bfc0a
Reviewed-on: https://boringssl-review.googlesource.com/2563
Reviewed-by: Adam Langley <agl@google.com>
It just inserts extra flushes everywhere and isn't used.
Change-Id: I082e4bada405611f4986ba852dd5575265854036
Reviewed-on: https://boringssl-review.googlesource.com/2456
Reviewed-by: Adam Langley <agl@google.com>
It should be set correctly prior to entering the handshake. Don't mask bugs by
assigning it.
Change-Id: Ib9bca8fad68916b3b242aad8819e3760e59e777a
Reviewed-on: https://boringssl-review.googlesource.com/2443
Reviewed-by: Adam Langley <agl@google.com>
first_packet is a temporary connection-global flag set for the duration of some
call and then queried from other code. This kind of logic is too difficult to
reason through. It also incorrectly treats renegotiate ClientHellos as
pre-version-negotiation records. This eliminates the need to query
enc_write_ctx (which wasn't EVP_AEAD-aware anyway).
Instead, take a leaf from Go TLS's book and add a have_version bit. This is
placed on s->s3 as it is connection state; s->s3 automatically gets reset on
SSL_clear while s doesn't.
This new flag will also be used to determine whether to do the V2ClientHello
sniff when the version-locked methods merge into SSLv23_method. It will also
replace needing to condition s->method against a dummy DTLS_ANY_VERSION value
to determine whether DTLS version negotiation has happened yet.
Change-Id: I5c8bc6258b182ba4ab175a48a84eab6d3a001333
Reviewed-on: https://boringssl-review.googlesource.com/2442
Reviewed-by: Adam Langley <agl@google.com>
Supporting both schemes seems pointless. Now that s->server and s->state are
set appropriately late and get_ssl_method is gone, the only difference is that
the client/server ones have non-functional ssl_accept or ssl_connect hooks. We
can't lose the generic ones, so let's unify on that.
Note: this means a static linker will no longer drop the client or server
handshake code if unused by a consumer linking statically. However, Chromium
needs the server half anyway for DTLS and WebRTC, so that's probably a lost
cause. Android also exposes server APIs.
Change-Id: I290f5fb4ed558f59fadb5d1f84e9d9c405004c23
Reviewed-on: https://boringssl-review.googlesource.com/2440
Reviewed-by: Adam Langley <agl@google.com>
If the state is SSL_ST_BEFORE, the SSL* was just initialized. Otherwise, we
don't want to call SSL_clear. The one case I found where we do is if a
handshake message is received and someone sets
SSL3_FLAGS_NO_RENEGOTIATE_CIPHERS. This is apparently intended for external
consumers to set, but I see no code in Google that does.
Which is fortunate because it'll trigger SSL_clear. This retains the BIOs but
drops all connection state, including the record. If the client just initiated
renego, that's the ClientHello that's lost. The connection then hangs: the now
reset SSL* wants a ClientHello (under the null cipher because that too's been
dropped) while the peer wants an encrypted ServerHello.
Change-Id: Iddb3e0bb86d39d98155b060f9273a0856f2d1409
Reviewed-on: https://boringssl-review.googlesource.com/2436
Reviewed-by: Adam Langley <agl@google.com>
SSL_ST_BEFORE is never standalone. As of upstream's
413c4f45ed0508d2242638696b7665f499d68265, SSL_ST_BEFORE is only ever set paired
with SSL_ST_ACCEPT or SSL_ST_CONNECT.
Conversely, SSL_ST_OK is never paired with SSL_ST_ACCEPT or SSL_ST_CONNECT. As
far as I can tell, this combination has never been possible.
Change-Id: Ifbc8f147be821026cf59f3d5038f0dbad3b0a1d2
Reviewed-on: https://boringssl-review.googlesource.com/2433
Reviewed-by: Adam Langley <agl@google.com>
It should already be assigned, as of upstream's
b31b04d951e9b65bde29657e1ae057b76f0f0a73. I believe these assignments are part
of the reason it used to appear to work. Replace them with assertions. So the
assertions are actually valid, check in SSL_connect / SSL_accept that they are
never called if the socket had been placed in the opposite state. (Or we'd be
in another place where it would have appeared to work with the handshake
functions fixing things afterwards.)
Now the only places handshake_func is set are in SSL_set_{connect,accept}_state
and the method switches.
Change-Id: Ib249212bf4aa889b94c35965a62ca06bdbcf52e1
Reviewed-on: https://boringssl-review.googlesource.com/2432
Reviewed-by: Adam Langley <agl@google.com>
This is a bit of cleanup that probably should have been done at the same time
as 30ddb434bf.
For now, version negotiation is implemented with a method swap. It also
performs this swap on SSL_set_session, but this was neutered in
30ddb434bf. Rather than hackishly neuter it,
remove it outright. In addition, remove SSL_set_ssl_method. Now all method
swaps are internal: SSLv23_method switch to a version-specific method and
SSL_clear undoing it.
Note that this does change behavior: if an SSL* is created with one
version-specific method and we SSL_set_session to a session from a /different/
version, we would switch to the /other/ version-specific method. This is
extremely confusing, so it's unlikely anyone was actually expecting it.
Version-specific methods in general don't work well.
Change-Id: I72a5c1f321ca9aeb1b52ebe0317072950ba25092
Reviewed-on: https://boringssl-review.googlesource.com/2390
Reviewed-by: Adam Langley <agl@google.com>
This commit fixes a number of crashes caused by malloc failures. They
were found using the -malloc-test=0 option to runner.go which runs tests
many times, causing a different allocation call to fail in each case.
(This test only works on Linux and only looks for crashes caused by
allocation failures, not memory leaks or other errors.)
This is not the complete set of crashes! More can be found by collecting
core dumps from running with -malloc-test=0.
Change-Id: Ia61d19f51e373bccb7bc604642c51e043a74bd83
Reviewed-on: https://boringssl-review.googlesource.com/2320
Reviewed-by: Adam Langley <agl@google.com>
This is an experimental flag that dates back to SSLeay 0.8.1b or earlier. It's
never set internally and never set in consumers.
Change-Id: I922583635c9f3d8d93f08f1707531ad22a26ae6a
Reviewed-on: https://boringssl-review.googlesource.com/2214
Reviewed-by: Adam Langley <agl@google.com>
Remove the old implementation which was excessively general. This mirrors the
SCT support and adds a single boolean flag to request an OCSP response with no
responder IDs, extensions, or frills. The response, if received, is stored on
the SSL_SESSION so that it is available for (re)validation on session
resumption; Chromium revalidates the saved auth parameters on resume.
Server support is unimplemented for now. This API will also need to be adjusted
in the future if we implement RFC 6961.
Change-Id: I533c029b7f7ea622d814d05f934fdace2da85cb1
Reviewed-on: https://boringssl-review.googlesource.com/1671
Reviewed-by: Adam Langley <agl@google.com>
This replaces the special-case in ssl3_get_message for Channel ID. Also add
ssl3_hash_current_message to hash the current message, taking TLS vs DTLS
handshake header size into account.
One subtlety with this flag is that a message intended to be processed with
SSL_GET_MESSAGE_DONT_HASH_MESSAGE cannot follow an optional message
(reprocessed with reuse_message, etc.). There is an assertion to that effect.
If need be, we can loosen it to requiring that the preceeding optional message
also pass SSL_GET_MESSAGE_DONT_HASH_MESSAGE and then maintain some state to
perform the more accurate assertion, but this is sufficient for now.
Change-Id: If8c87342b291ac041a35885b9b5ee961aee86eab
Reviewed-on: https://boringssl-review.googlesource.com/1630
Reviewed-by: Adam Langley <agl@google.com>
In the fixed_ecdh case, it wasn't even implemented, but there was stub code for
it. It complicates the ClientKeyExchange (the client parameters become implicit
in the certificate) and isn't used.
Change-Id: I3627a37042539c90e05e59cd0cb3cd6c56225561
Reviewed-on: https://boringssl-review.googlesource.com/1563
Reviewed-by: Adam Langley <agl@google.com>
RFC 6347 changed the meaning of server_version in HelloVerifyRequest. It should
now always be 1.0 with version negotiation not happening until ServerHello. Fix
runner.go logic and remove #if-0'd code in dtls1_get_hello_verify.
Enforce this in the runner for when we get DTLS 1.2 tests.
Change-Id: Ice83628798a231df6bf268f66b4c47b14a519386
Reviewed-on: https://boringssl-review.googlesource.com/1552
Reviewed-by: Adam Langley <agl@google.com>
Rather than switching the order of the ServerHello and HelloVerifyRequest
states and processing each twice, have the states follow the protocol order.
HelloVerifyRequest reading is optional and ServerHello is strict. Use the
send_cookie bit to determine whether we're expecting a cookie or not.
Fix the dtls1_stop_timer call in these states to consistently hit the end of a
server flight; the previous flight should not be cleared from the retransmit
buffer until the entire next flight is received. That said, OpenSSL doesn't
appear to implement the part where, on receipt of the previous peer flight, the
buffered flight is retransmitted. (With the exception of a SSL3_MT_FINISHED
special-case in dtls1_read_bytes.) So if the peer is also OpenSSL, this doesn't
do anything.
Also fix the DTLS test which wasn't actually asserting that the ClientHello
matched.
Change-Id: Ia542190972dbffabb837d32c9d453a243caa90b2
Reviewed-on: https://boringssl-review.googlesource.com/1551
Reviewed-by: Adam Langley <agl@google.com>
I see no internal users and the existence of a THIRD version encoding
complicates all version-checking logic. Also convert another version check to
SSL_IS_DTLS that was missed earlier.
Change-Id: I60d215f57d44880f6e6877889307dc39dbf838f7
Reviewed-on: https://boringssl-review.googlesource.com/1550
Reviewed-by: Adam Langley <agl@google.com>
Gives bounds checks and asserts that there's nothing after the cookie.
Change-Id: I8f9753e0c72670e9960f73a5722cefd9c02696a9
Reviewed-on: https://boringssl-review.googlesource.com/1507
Reviewed-by: Adam Langley <agl@google.com>
