Match the other internal headers.
Change-Id: Iff7e2dd06a1a7bf993053d0464cc15638ace3aaa
Reviewed-on: https://boringssl-review.googlesource.com/4280
Reviewed-by: Adam Langley <agl@google.com>
These are the remaining untested cipher suites. Rather than add support in
runner.go, just remove them altogether. Grepping for this is a little tricky,
but nothing enables aNULL (all occurrences disable it), and all occurrences of
["ALL:] seem to be either unused or explicitly disable anonymous ciphers.
Change-Id: I4fd4b8dc6a273d6c04a26e93839641ddf738343f
Reviewed-on: https://boringssl-review.googlesource.com/4258
Reviewed-by: Adam Langley <agl@google.com>
After sharding the session cache for fallbacks, the numbers have been pretty
good; 0.03% on dev and 0.02% on canary. Stable is at 0.06% but does not have
the sharded session cache. Before sharding, stable, beta, and dev had been
fairly closely aligned. Between 0.03% being low and the fallback saving us in
all but extremely contrived cases, I think this should be fairly safe.
Add tests for both the cipher suite and protocol version mismatch checks.
BUG=441456
Change-Id: I2374bf64d0aee0119f293d207d45319c274d89ab
Reviewed-on: https://boringssl-review.googlesource.com/3972
Reviewed-by: Adam Langley <agl@google.com>
Also check for overflow, although it really shouldn't happen.
Change-Id: I34dfe8eaf635aeaa8bef2656fda3cd0bad7e1268
Reviewed-on: https://boringssl-review.googlesource.com/4235
Reviewed-by: Adam Langley <agl@google.com>
Separate actually writing the fragment to the network from assembling it so
there is no need for is_fragment. record_split_done also needn't be a global;
as of 7fdeaf1101, it is always reset to 0 whether
or not SSL3_WANT_WRITE occurred, despite the comment.
I believe this is sound, but the pre-7fdeaf1 logic wasn't quiiite right;
ssl3_write_pending allows a retry to supply *additional* data, so not all
plaintext had been commited to before the IV was randomized. We could fix this
by tracking how many bytes were committed to the last time we fragmented, but
this is purely an optimization and doesn't seem worth the complexity.
This also fixes the alignment computation in the record-splitting case. The
extra byte was wrong, as demonstrated by the assert.
Change-Id: Ia087a45a6622f4faad32e501942cc910eca1237b
Reviewed-on: https://boringssl-review.googlesource.com/4234
Reviewed-by: Adam Langley <agl@google.com>
There's multiple sets of APIs for selecting the curve. Fold away
SSL_OP_SINGLE_ECDH_USE as failing to set it is either a no-op or a bug. With
that gone, the consumer only needs to control the selection of a curve, with
key generation from then on being uniform. Also clean up the interaction
between the three API modes in s3_srvr.c; they were already mutually exclusive
due to tls1_check_ec_tmp_key.
This also removes all callers of EC_KEY_dup (and thus CRYPTO_dup_ex_data)
within the library.
Change-Id: I477b13bd9e77eb03d944ef631dd521639968dc8c
Reviewed-on: https://boringssl-review.googlesource.com/4200
Reviewed-by: Adam Langley <agl@google.com>
Within the library, only ssl_update_cache read them, so add a dedicated field
to replace that use.
The APIs have a handful of uninteresting callers so I've left them in for now,
but they now always return zero.
Change-Id: Ie4e36fd4ab18f9bff544541d042bf3c098a46933
Reviewed-on: https://boringssl-review.googlesource.com/4101
Reviewed-by: Adam Langley <agl@google.com>
Align with upstream's renames from a while ago. These names are considerably
more standard. This also aligns with upstream in that both "ECDHE" and "EECDH"
are now accepted in the various cipher string parsing bits.
Change-Id: I84c3daeacf806f79f12bc661c314941828656b04
Reviewed-on: https://boringssl-review.googlesource.com/4053
Reviewed-by: Adam Langley <agl@google.com>
This allows the current RC4 state of an SSL* to be extracted. We have
internal uses for this functionality.
Change-Id: Ic124c4b253c8325751f49e7a4c021768620ea4b7
Reviewed-on: https://boringssl-review.googlesource.com/3722
Reviewed-by: Adam Langley <agl@google.com>
This callback receives information about the ClientHello and can decide
whether or not to allow the handshake to continue.
Change-Id: I21be28335fa74fedb5b73a310ee24310670fc923
Reviewed-on: https://boringssl-review.googlesource.com/3721
Reviewed-by: Adam Langley <agl@google.com>
Turn them into static functions that take in an hm_fragment. It's not
immediately obvious that the frag_off/frag_len bounds checks and the msg_len
consistency check are critical to avoiding an out-of-bounds write. Better to
have dtls1_hm_fragment_mark also check internally.
Also rework the bitmask logic to be clearer and avoid a table.
Change-Id: Ica54e98f66295efb323e033cb6c67ab21e7d6cbc
Reviewed-on: https://boringssl-review.googlesource.com/3765
Reviewed-by: Adam Langley <agl@google.com>
Notably, drop all special cases around receiving a message in order and
receiving a full message. It makes things more complicated and was the source
of bugs (the MixCompleteMessageWithFragments tests added in this CL did not
pass before). Instead, every message goes through an hm_fragment, and
dtls1_get_message always checks buffered_messages to see if the next is
complete.
The downside is that we pay one more copy of the message data in the common
case. This is only during connection setup, so I think it's worth the
simplicity. (If we want to optimize later, we could either tighten
ssl3_get_message's interface to allow the handshake data being in the
hm_fragment's backing store rather than s->init_buf or swap out s->init_buf
with the hm_fragment's backing store when a mesasge completes.
This CL does not address ssl_read_bytes being an inappropriate API for DTLS.
Future work will revise the handshake/transport boundary to align better with
DTLS's needs. Also other problems that I've left as TODOs.
Change-Id: Ib4570d45634b5181ecf192894d735e8699b1c86b
Reviewed-on: https://boringssl-review.googlesource.com/3764
Reviewed-by: Adam Langley <agl@google.com>
Test both asynchronous and synchronous versions. This callback is somewhat
different from others. It's NOT called a second time when the handshake is
resumed. This appears to be intentional and not a mismerge from the internal
patch. The caller is expected to set up any state before resuming the handshake
state machine.
Also test the early callback returning an error.
Change-Id: If5e6eddd7007ea5cdd7533b4238e456106b95cbd
Reviewed-on: https://boringssl-review.googlesource.com/3590
Reviewed-by: Adam Langley <agl@google.com>
(Which is just an exported wrapper around ssl3_get_cipher_by_value.)
Change-Id: Ibba166015ce59e337ff50963ba20237ac4949aaf
Reviewed-on: https://boringssl-review.googlesource.com/3543
Reviewed-by: Adam Langley <agl@google.com>
Upstream settled in this API, and it's also the one that we expect
internally and that third_party code will expect.
Change-Id: Id7af68cf0af1f2e4d9defd37bda2218d70e2aa7b
Reviewed-on: https://boringssl-review.googlesource.com/3542
Reviewed-by: Adam Langley <agl@google.com>
Found while diagnosing some crashes and hangs in the malloc tests. This (and
the follow-up) get us further but does not quite let the malloc tests pass
quietly, even without valgrind. DTLS silently ignores some malloc failures
(confusion with silently dropping bad packets) which then translate to hangs.
Change-Id: Ief06a671e0973d09d2883432b89a86259e346653
Reviewed-on: https://boringssl-review.googlesource.com/3482
Reviewed-by: Adam Langley <agl@google.com>
False Start is the name it's known by now. Deprecate the old API and expose new
ones with the new name.
Change-Id: I32d307027e178fd7d9c0069686cc046f75fdbf6f
Reviewed-on: https://boringssl-review.googlesource.com/3481
Reviewed-by: Adam Langley <agl@google.com>
I found no users of this. We can restore it if needbe, but I don't expect
anyone to find it useful in its current form. The API is suspect for the same
reasons DTLSv1_listen was. An SSL object is stateful and assumes you already
have the endpoint separated out.
If we ever need it, server-side HelloVerifyRequest and DTLSv1_listen should be
implemented by a separate stateless listener that statelessly handles
cookieless ClientHello + HelloVerifyRequest. Once a ClientHello with a valid
cookie comes in, it sets up a stateful SSL object and passes control along to
that.
Change-Id: I86adc1dfb6a81bebe987784c36ad6634a9a1b120
Reviewed-on: https://boringssl-review.googlesource.com/3480
Reviewed-by: Adam Langley <agl@google.com>
This saves about 6-7k of error data.
Change-Id: Ic28593d4a1f5454f00fb2399d281c351ee57fb14
Reviewed-on: https://boringssl-review.googlesource.com/3385
Reviewed-by: Adam Langley <agl@google.com>
OpenSSL's internal names for the ciphers are not the standard ones and are not
easy to consistently map to the standard ones. Add an API to get the real names
out. (WebRTC wants an API to get the standard names out.)
Also change some incorrect flags on SHA-256 TLS 1.2 ciphers;
SSL_HANDSHAKE_MAC_DEFAULT and SSL_HANDSHAKE_MAC_SHA256 are the same after TLS
1.2. A TLS 1.2 cipher should be tagged explicitly with SHA-256. (This avoids
tripping a check in SSL_CIPHER_get_rfc_name which asserts that default-hash
ciphers only ever use SHA-1 or MD5 for the bulk cipher MAC.)
Change-Id: Iaec2fd4aa97df29883094d3c2ae60f0ba003bf07
The fact that an SSL_SESSION is reference-counted is already part of the API.
If an external application (like, say, the test code) wishes to participate, we
should let it.
Change-Id: If04d26a35141da14fd8d917de6cc1c10537ad11a
Reviewed-on: https://boringssl-review.googlesource.com/3344
Reviewed-by: Adam Langley <agl@google.com>
This makes the following changes:
- SSL_cutthrough_complete no longer rederives whether cutthrough happened and
just maintains a handshake bit.
- SSL_in_init no longer returns true if we are False Starting but haven't
completed the handshake. That logic was awkward as it depended on querying
in_read_app_data to force SSL_read to flush the entire handshake. Defaulting
SSL_in_init to continue querying the full handshake and special-casing
SSL_write is better. E.g. the check in bidirectional SSL_shutdown wants to know
if we're in a handshake. No internal consumer of
SSL_MODE_HANDSHAKE_CUTTHROUGH ever queries SSL_in_init directly.
- in_read_app_data is gone now that the final use is dead.
Change-Id: I05211a116d684054dfef53075cd277b1b30623b5
Reviewed-on: https://boringssl-review.googlesource.com/3336
Reviewed-by: Adam Langley <agl@google.com>
Nothing recognized through those codepaths is fragmentable in DTLS. Also remove
an unnecessary epoch check. It's not possible to process a record from the
wrong epoch.
Change-Id: I9d0f592860bb096563e2bdcd2c8e50a0d2b65f59
Reviewed-on: https://boringssl-review.googlesource.com/3232
Reviewed-by: Adam Langley <agl@google.com>
We will not support any form of DTLS renego.
Change-Id: I6eab4ed12a131ad27fdb9b5ea7cc1f35d872cd43
Reviewed-on: https://boringssl-review.googlesource.com/3230
Reviewed-by: Adam Langley <agl@google.com>
It has no callers in internal code.
Change-Id: I53cf1769b71be6a0441533b6af7d3f64aab5098a
Reviewed-on: https://boringssl-review.googlesource.com/3219
Reviewed-by: Adam Langley <agl@google.com>
This is so the tests needn't be sensitive to the clock. It is, unfortunately, a
test-only hook, but the DTLS retransmit/timeout logic more-or-less requires it
currently. Use this hook to, for now, freeze the clock at zero. This makes the
tests deterministic.
It might be worth designing a saner API in the future. The current one,
notably, requires that the caller's clock be compatible with the one we
internally use. It's also not clear whether the caller needs to call
DTLSv1_handle_timeout or can just rely on the state machine doing it internally
(as it does do). But mock clocks are relatively tame and WebRTC wants to
compile against upstream OpenSSL for now, so we're limited in how much new API
we can build.
Change-Id: I7aad51570596f69275ed0fc1a8892393e4b7ba13
Reviewed-on: https://boringssl-review.googlesource.com/3210
Reviewed-by: Adam Langley <agl@google.com>
Forgot to export those when adding them.
Change-Id: I206f488eb38e5ff55b8c212911aced0cf28b7664
Reviewed-on: https://boringssl-review.googlesource.com/3090
Reviewed-by: Adam Langley <agl@google.com>
Since we can't update wpa_supplicant nearly as fast as we would like, we
need to try and keep it happy. Unfortunately, the recent switch to
EVP_AEAD breaks it so this dismal change adds some dummy variables that
will allow it to compile.
Change-Id: I03d6b81c30bbebc07af3af0d6cda85a26b461edf
Reviewed-on: https://boringssl-review.googlesource.com/2960
Reviewed-by: Adam Langley <agl@google.com>
SSL_library_init already loads the error strings (unlike upstream). Code which
calls both will end up loading error strings twice. Instead make the second
call a no-op.
Change-Id: Ifd34ab20ed46aabeba14661e58f8dac2bbb29f69
Reviewed-on: https://boringssl-review.googlesource.com/2790
Reviewed-by: Adam Langley <agl@google.com>
Add some missing headers and ensure each header has a short description. doc.go
gets confused at declarations that break before the first (, so avoid doing
that. Also skip a/an/deprecated: in markupFirstWord and process pipe words in
the table of contents.
Change-Id: Ia08ec5ae8e496dd617e377e154eeea74f4abf435
Reviewed-on: https://boringssl-review.googlesource.com/2839
Reviewed-by: Adam Langley <agl@google.com>
Based in part on upstream's cf75017bfd60333ff65edf9840001cd2c49870a3. This
situation really shouldn't be able to happen, but between no static asserts
that the minimum MTU is always large enough and a bug in reseting the MTU later
(to be fixed be a follow-up import from upstream), check these and return a
useful error code.
Change-Id: Ie853e5d35a6a7bc9c0032e74ae71529d490f4fe2
Reviewed-on: https://boringssl-review.googlesource.com/2825
Reviewed-by: Adam Langley <agl@google.com>
As of our 82b7da271f, an SSL_SESSION created
externally always has a cipher set. Unknown ciphers are rejected early. Prior
to that, an SSL_SESSION would only have a valid cipher or valid cipher_id
depending on whether it came from an internal or external session cache.
See upstream's 6a8afe2201cd888e472e44225d3c9ca5fae1ca62 and
c566205319beeaa196e247400c7eb0c16388372b for more context.
Since we don't get ourselves into this strange situation and s->cipher is now
always valid for established SSL_SESSION objects (the existence of
unestablished SSL_SESSION objects during a handshake is awkward, but something
to deal with later), do away with s->cipher_id altogether. An application
should be able to handle failing to parse an SSL_SESSION instead of parsing it
successfuly but rejecting all resumptions.
Change-Id: I2f064a815e0db657b109c7c9269ac6c726d1ffed
Reviewed-on: https://boringssl-review.googlesource.com/2703
Reviewed-by: Adam Langley <agl@google.com>
This lets us fold away the SSLv3-specific generate_master_secret. Once SSLv3
uses AEADs, others will fold away as well.
Change-Id: I27c1b75741823bc6db920d35f5dd5ce71b6fdbb3
Reviewed-on: https://boringssl-review.googlesource.com/2697
Reviewed-by: Adam Langley <agl@google.com>
Fix up the generate_master_secret parameter while we're here.
Change-Id: I1c80796d1f481be0c3eefcf3222f2d9fc1de4a51
Reviewed-on: https://boringssl-review.googlesource.com/2696
Reviewed-by: Adam Langley <agl@google.com>
The EVP_CIPHER codepath should no longer be used with TLS. It still exists for
DTLS and SSLv3. The AEAD construction in TLS does not allow for
variable-overhead AEADs, so stateful AEADs do not include the length in the ad
parameter. Rather the AEADs internally append the unpadded length once it is
known. EVP_aead_rc4_md5_tls is modified to account for this.
Tests are added (and RC4-MD5's regenerated) for each of the new AEADs. The
cipher tests are all moved into crypto/cipher/test because there's now a lot of
them and they clutter the directory listing.
In ssl/, the stateful AEAD logic is also modified to account for stateful AEADs
with a fixed IV component, and for AEADs which use a random nonce (for the
explicit-IV CBC mode ciphers).
The new implementation fixes a bug/quirk in stateless CBC mode ciphers where
the fixed IV portion of the keyblock was generated regardless. This is at the
end, so it's only relevant for EAP-TLS which generates a MSK from the end of
the key block.
Change-Id: I2d8b8aa11deb43bde2fd733f4f90b5d5b8cb1334
Reviewed-on: https://boringssl-review.googlesource.com/2692
Reviewed-by: Adam Langley <agl@google.com>
Some parts of Android can't be updated yet so this change adds
declarations (only) for some functions that will be stubbed in
Android-specific code. (That Android-specific code will live in the
Android repo, not the BoringSSL repo.)
Trying to use these functions outside of Android will result in a link
error.
Change-Id: Iaa9b956e6408d21cd8fc34d90d9c15657e429877
Reviewed-on: https://boringssl-review.googlesource.com/2760
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
Add a dedicated error code to the queue for a handshake_failure alert in
response to ClientHello. This matches NSS's client behavior and gives a better
error on a (probable) failure to negotiate initial parameters.
BUG=https://crbug.com/446505
Change-Id: I34368712085a6cbf0031902daf2c00393783d96d
Reviewed-on: https://boringssl-review.googlesource.com/2751
Reviewed-by: Adam Langley <agl@google.com>
This makes SSLv23_method go through DTLS_ANY_VERSION's version negotiation
logic. This allows us to get rid of duplicate ClientHello logic. For
compatibility, SSL_METHOD is now split into SSL_PROTOCOL_METHOD and a version.
The legacy version-locked methods set min_version and max_version based this
version field to emulate the original semantics.
As a bonus, we can now handle fragmented ClientHello versions now.
Because SSLv23_method is a silly name, deprecate that too and introduce
TLS_method.
Change-Id: I8b3df2b427ae34c44ecf972f466ad64dc3dbb171
Tested manually by replacing SSLv23_method() with TLSv1_2_method() in
bssl_shim. This is a large chunk of code which is not run in SSLv23_method(),
but it will be run after unification. It's split out separately to ease review.
Change-Id: I6bd241daca17aa0f9b3e36e51864a29755a41097
Amend the version negotiation tests to test this new spelling of max_version.
min_version will be tested in a follow-up.
Change-Id: Ic4bfcd43bc4e5f951140966f64bb5fd3e2472b01
Reviewed-on: https://boringssl-review.googlesource.com/2583
Reviewed-by: Adam Langley <agl@google.com>
SSL3_ENC_METHOD will remain version-specific while SSL_METHOD will become
protocol-specific. This finally removes all the version-specific portions of
SSL_METHOD but the version tag itself.
(SSL3_ENC_METHOD's version-specific bits themselves can probably be handled by
tracking a canonicalized protocol version. It would simplify version
comparisons anyway. The one catch is SSLv3 has a very different table. But
that's a cleanup for future. Then again, perhaps a version-specific method
table swap somewhere will be useful later for TLS 1.3.)
Much of this commit was generated with sed invocation:
s/method->ssl3_enc/enc_method/g
Change-Id: I2b192507876aadd4f9310240687e562e56e6c0b1
Reviewed-on: https://boringssl-review.googlesource.com/2581
Reviewed-by: Adam Langley <agl@google.com>
Missed this one. It requires that we be able to change an SSL_METHOD after the
after, which complicates compiling the version locking into min_version /
max_version configurations.
Change-Id: I24ba54b7939360bbfafe3feb355a65840bda7611
Reviewed-on: https://boringssl-review.googlesource.com/2579
Reviewed-by: Adam Langley <agl@google.com>
SSL_ST_BEFORE isn't a possible state anymore. It seems this state meant the
side wasn't known, back in the early SSLeay days. Now upstream guesses
(sometimes incorrectly with generic methods), and we don't initialize until
later. SSL_shutdown also doesn't bother to call ssl3_shutdown at all if the
side isn't initialized and SSL_ST_BEFORE isn't the uninitialized state, which
seems a much more sensible arrangement.
Likewise, because bare SSL_ST_BEFOREs no longer exist, SSL_in_init implies
SSL_in_before and there is no need to check both.
Change-Id: Ie680838b2f860b895073dabb4d759996e21c2824
Reviewed-on: https://boringssl-review.googlesource.com/2564
Reviewed-by: Adam Langley <agl@google.com>
There's an undefined one not used anywhere. The others ought to be const. Also
move the forward declaration to ssl.h so we don't have to use the struct name.
Change-Id: I76684cf65255535c677ec19154cac74317c289ba
Reviewed-on: https://boringssl-review.googlesource.com/2561
Reviewed-by: Adam Langley <agl@google.com>
The ClientHello record is padded to 1024 bytes when
fastradio_padding is enabled. As a result, the 3G cellular radio
is fast forwarded to DCH (high data rate) state. This mechanism
leads to a substantial redunction in terms of TLS handshake
latency, and benefits mobile apps that are running on top of TLS.
Change-Id: I3d55197b6d601761c94c0f22871774b5a3dad614
It just inserts extra flushes everywhere and isn't used.
Change-Id: I082e4bada405611f4986ba852dd5575265854036
Reviewed-on: https://boringssl-review.googlesource.com/2456
Reviewed-by: Adam Langley <agl@google.com>
first_packet is a temporary connection-global flag set for the duration of some
call and then queried from other code. This kind of logic is too difficult to
reason through. It also incorrectly treats renegotiate ClientHellos as
pre-version-negotiation records. This eliminates the need to query
enc_write_ctx (which wasn't EVP_AEAD-aware anyway).
Instead, take a leaf from Go TLS's book and add a have_version bit. This is
placed on s->s3 as it is connection state; s->s3 automatically gets reset on
SSL_clear while s doesn't.
This new flag will also be used to determine whether to do the V2ClientHello
sniff when the version-locked methods merge into SSLv23_method. It will also
replace needing to condition s->method against a dummy DTLS_ANY_VERSION value
to determine whether DTLS version negotiation has happened yet.
Change-Id: I5c8bc6258b182ba4ab175a48a84eab6d3a001333
Reviewed-on: https://boringssl-review.googlesource.com/2442
Reviewed-by: Adam Langley <agl@google.com>
If SSL_clear is called before SSL_set_{connect,accept}_state (as SSL_new does
internally), s->state will get set prematurely. Likewise, s->server is set
based on the method's ssl_accept hook, but client SSL's may be initialized from
a generic SSL_METHOD too.
Since we can't easily get rid of the generic SSL_METHODs, defer s->state and
s->server initialization until the side is known.
Change-Id: I0972e17083df22a3c09f6f087011b54c699a22e7
Reviewed-on: https://boringssl-review.googlesource.com/2439
Reviewed-by: Adam Langley <agl@google.com>
It should already be assigned, as of upstream's
b31b04d951e9b65bde29657e1ae057b76f0f0a73. I believe these assignments are part
of the reason it used to appear to work. Replace them with assertions. So the
assertions are actually valid, check in SSL_connect / SSL_accept that they are
never called if the socket had been placed in the opposite state. (Or we'd be
in another place where it would have appeared to work with the handshake
functions fixing things afterwards.)
Now the only places handshake_func is set are in SSL_set_{connect,accept}_state
and the method switches.
Change-Id: Ib249212bf4aa889b94c35965a62ca06bdbcf52e1
Reviewed-on: https://boringssl-review.googlesource.com/2432
Reviewed-by: Adam Langley <agl@google.com>
We intend to deprecate the version-locked methods and unify them. Don't expose
that there's a method swap. (The existing version-locked methods will merely be
a shorthand for configuring minimum/maximum versions.)
There is one consumer of SSL_get_ssl_method in internal code, but it's just
some logging in test-only code. All it's doing is getting the version as a
string which should be SSL_get_version instead.
While here, also remove dead ssl_bad_method function. Also the bogus
ssl_crock_st forward-declaration. The forward declaration in base.h should be
perfectly sufficient.
Change-Id: I50480808f51022e05b078a285f58ec85d5ad7c8e
Reviewed-on: https://boringssl-review.googlesource.com/2408
Reviewed-by: Adam Langley <agl@google.com>
b9cc33a4d6 deleted its documentation rather than
SSL_OP_EPHEMERAL_RSA's.
Change-Id: I2e099a2dc498f145c5a3ccaac824edbda27f7e89
Reviewed-on: https://boringssl-review.googlesource.com/2407
Reviewed-by: Adam Langley <agl@google.com>
They're mapped to the same value, which is the only reason the tests work right
now.
Change-Id: I22f6e3a6b3a2c88b0f92b6d261e86111b4172cd6
Reviewed-on: https://boringssl-review.googlesource.com/2406
Reviewed-by: Adam Langley <agl@google.com>
This is a bit of cleanup that probably should have been done at the same time
as 30ddb434bf.
For now, version negotiation is implemented with a method swap. It also
performs this swap on SSL_set_session, but this was neutered in
30ddb434bf. Rather than hackishly neuter it,
remove it outright. In addition, remove SSL_set_ssl_method. Now all method
swaps are internal: SSLv23_method switch to a version-specific method and
SSL_clear undoing it.
Note that this does change behavior: if an SSL* is created with one
version-specific method and we SSL_set_session to a session from a /different/
version, we would switch to the /other/ version-specific method. This is
extremely confusing, so it's unlikely anyone was actually expecting it.
Version-specific methods in general don't work well.
Change-Id: I72a5c1f321ca9aeb1b52ebe0317072950ba25092
Reviewed-on: https://boringssl-review.googlesource.com/2390
Reviewed-by: Adam Langley <agl@google.com>
The data is owned by the SSL_SESSION, so the caller should not modify it. This
will require changes in Chromium, but they should be trivial.
Change-Id: I314718530c7d810f7c7b8852339b782b4c2dace1
Reviewed-on: https://boringssl-review.googlesource.com/2409
Reviewed-by: Adam Langley <agl@google.com>
This is only used for EAP-FAST which we apparently don't need to support.
Remove it outright. We broke it in 9eaeef81fa by
failing to account for session misses.
If this changes and we need it later, we can resurrect it. Preferably
implemented differently: the current implementation is bolted badly onto the
handshake. Ideally use the supplied callbacks to fabricate an appropriate
SSL_SESSION and resume that with as much of the normal session ticket flow as
possible.
The one difference is that EAP-FAST seems to require the probing mechanism for
session tickets rather than the sane session ID echoing version. We can
reimplement that by asking the record layer to probe ahead for one byte.
Change-Id: I38304953cc36b2020611556a91e8ac091691edac
Reviewed-on: https://boringssl-review.googlesource.com/2360
Reviewed-by: Adam Langley <agl@google.com>
Both of these are newly-exported in OpenSSL 1.0.2, so they cannot be used by
current consumers.
This was added in upstream's 18d7158809c9722f4c6d2a8af7513577274f9b56 to
support custom selection of certificates. The intent seems to be that you
listen to cert_cb and use SSL_check_chain to lean on OpenSSL to process
signature algorithms list for you.
Unfortunately, the implementation is slightly suspect: it uses the same
function as the codepath which mutates and refers to the CERT_PKEY of the
matching type. Some access was guarded by check_flags, but this is too
complex. Part of it is also because the matching digest is selected early and
we intend to connect this to EVP_PKEY_supports_digest so it is no longer a
property of just the key type.
Let's remove the hook for now, to unblock removing a lot of complexity. After
cleaning up this area, a function like this could be cleaner to support, but
we already have a version of this: select_certificate_cb and
ssl_early_callback_ctx.
Change-Id: I3add425b3996e5e32d4a88e14cc607b4fdaa5aec
Reviewed-on: https://boringssl-review.googlesource.com/2283
Reviewed-by: Adam Langley <agl@google.com>
This is maintained just to distinguish whether the digest was negotiated or we
simply fell back to assuming SHA-1 support. No code is sensitive to this flag
and it adds complexity because it is set at a different time, for now, from the
rest of valid_flags.
The flag is new in OpenSSL 1.0.2, so nothing external could be sensitive to it.
Change-Id: I9304e358d56f44d912d78beabf14316d456bf389
Reviewed-on: https://boringssl-review.googlesource.com/2282
Reviewed-by: Adam Langley <agl@google.com>
This is new in OpenSSL 1.0.2 so it isn't used anywhere. Cuts down slightly on
connection-global state associated with signature algorithm processing.
Repurposing the digest field to mean both "the digest we choose to sign with
this key" and "the digest the last signature we saw happened to use" is
confusing.
Change-Id: Iec4d5078c33e271c8c7b0ab221c356ee8480b89d
Reviewed-on: https://boringssl-review.googlesource.com/2281
Reviewed-by: Adam Langley <agl@google.com>
Prior to this change, BoringSSL maintained a 2-byte buffer for alerts,
and would support reassembly of fragmented alerts.
NSS does not support fragmented alerts, nor would any reasonable
implementation produce them. Remove fragmented alert handling and
produce an error if a fragmented alert has ever been encountered.
Change-Id: I31530ac372e8a90b47cf89404630c1c207cfb048
Reviewed-on: https://boringssl-review.googlesource.com/2125
Reviewed-by: Adam Langley <agl@google.com>
There's not much point in retaining the identity hint in the SSL_SESSION. This
avoids the complexity around setting psk_identity hint on either the SSL or the
SSL_SESSION. Introduce a peer_psk_identity_hint for the client to store the one
received from the server.
This changes the semantics of SSL_get_psk_identity_hint; it now only returns
the value configured for the server. The client learns the hint through the
callback. This is compatible with the one use of this API in conscrypt (it
pulls the hint back out to pass to a callback).
Change-Id: I6d9131636b47f13ac5800b4451436a057021054a
Reviewed-on: https://boringssl-review.googlesource.com/2213
Reviewed-by: Adam Langley <agl@google.com>
This was added in http://rt.openssl.org/Ticket/Display.html?id=2033 to support
a mode where a DTLS socket would statelessly perform the ClientHello /
HelloVerifyRequest portion of the handshake, to be handed off to a socket
specific to this peer address.
This is not used by WebRTC or other current consumers. If we need to support
something like this, it would be cleaner to do the listen portion (cookieless
ClientHello + HelloVerifyRequest) externally and then spin up an SSL instance
on receipt of a cookied ClientHello. This would require a slightly more complex
BIO to replay the second ClientHello but would avoid peppering the DTLS
handshake state with a special short-circuiting mode.
Change-Id: I7a413932edfb62f8b9368912a9a0621d4155f1aa
Reviewed-on: https://boringssl-review.googlesource.com/2220
Reviewed-by: Adam Langley <agl@google.com>
Without SSL_MODE_AUTO_RETRY, even blocking mode will return
SSL_ERROR_WANT_{READ|WRITE} in the event of a renegotiation.
The comments in the code speak only of "nasty problems" unless this is
done. The original commit that added SSL_MODE_AUTO_RETRY
(54f10e6adce56eb2e59936e32216162aadc5d050) gives a little more detail:
The [...] behaviour is needed by applications such as s_client and
s_server that use select() to determine when to use SSL_read.
Without the -nbio flag, s_client will use select() to find when the
socket is readable and then call SSL_read with a blocking socket.
However, this will still block in the event of an incomplete record, so
the delay is already unbounded. This it's very unclear what the point of
this behaviour ever was.
Perhaps if the read and write paths were different sockets where the
read socket was non-blocking but the write socket was blocking. But that
seems like an implausible situation to worry too much about.
Change-Id: I9d9f2526afc2e0fd0e5440e9a047f419a2d61afa
Reviewed-on: https://boringssl-review.googlesource.com/2140
Reviewed-by: Adam Langley <agl@google.com>
Deprecate the old two-pass version of the function. If the ticket is too long,
replace it with a placeholder value but keep the connection working.
Change-Id: Ib9fdea66389b171862143d79b5540ea90a9bd5fb
Reviewed-on: https://boringssl-review.googlesource.com/2011
Reviewed-by: Adam Langley <agl@google.com>
No more need for all the macros. For now, this still follows the two-pass i2d_*
API despite paying a now-unnecessary malloc. The follow-on commit will expose a
more reasonable API and deprecate this one.
Change-Id: I50ec63e65afbd455ad3bcd2f1ae3c782d9e8f9d2
Reviewed-on: https://boringssl-review.googlesource.com/2000
Reviewed-by: Adam Langley <agl@google.com>
Do away with all those unreadable macros. Also fix many many memory leaks in
the SSL_SESSION reuse case. Add a number of helper functions in CBS to help
with parsing optional fields.
Change-Id: I2ce8fd0d5b060a1b56e7f99f7780997fabc5ce41
Reviewed-on: https://boringssl-review.googlesource.com/1998
Reviewed-by: Adam Langley <agl@google.com>
This was there since OpenSSL's initial commit and doesn't appear to serve any
purpose anymore. There's also an instance in x509_vfy.h, but this does not
actually appear to be a no-op because the headers include each other.
Change-Id: I6dee04538bdb3fd91a5da3c71c9d0027443b6bbc
Reviewed-on: https://boringssl-review.googlesource.com/2020
Reviewed-by: Adam Langley <agl@google.com>
There's no need to store them on the session. They're temporary handshake
state and weren't serialized in d2i_SSL_SESSION anyway.
Change-Id: I830d378ab49aaa4fc6c4c7a6a8c035e2263fb763
Reviewed-on: https://boringssl-review.googlesource.com/1990
Reviewed-by: Adam Langley <agl@google.com>
This removes the need to track the client cipher list in the SSL_SESSION. It
also eliminates a field in SSL_SESSION that wasn't serialized by
i2d_SSL_SESSION. It's only used to implement SSL_get_shared_ciphers which is
only used by debug code.
Moreover, it doesn't work anyway. The SSLv2 logic pruned that field to the
common ciphers, but the SSLv3+ logic just stores the client list as-is. I found
no internal callers that were actually compiled (if need be we can stub in
something that always returns the empty string or so).
Change-Id: I55ad45964fb4037fd623f7591bc574b2983c0698
Reviewed-on: https://boringssl-review.googlesource.com/1866
Reviewed-by: Adam Langley <agl@google.com>
We patch bugs into the runner implementation for testing, not our own.
Change-Id: I0a8ac73eaeb70db131c01a0fd9c84f258589a884
Reviewed-on: https://boringssl-review.googlesource.com/1845
Reviewed-by: Adam Langley <agl@google.com>
Android requested that the wpa_supplicant go upstream. This change adds
some dummy functions and reinstates DSA_dup_DH in order to make the diff
smaller and easier for upstream.
Change-Id: I77ac271b8652bae5a0bbe16afde51d9096f3dfb5
Reviewed-on: https://boringssl-review.googlesource.com/1740
Reviewed-by: Adam Langley <agl@google.com>
This gives inappropriate_fallback and close_notify sent during the handshake
error strings. It'd also avoid having to write
case SSL_AD_REASON_OFFSET + SSL_AD_CLOSE_NOTIFY:
in Chromium.
Change-Id: I42123d5452eb7843ead883d112e58b3f087d3067
Reviewed-on: https://boringssl-review.googlesource.com/1780
Reviewed-by: Adam Langley <agl@google.com>
Update SSL_OP_ALL to account for SSL_OP_CRYPTOPRO_TLSEXT_BUG being gone,
and update ssl3_setup_write_buffer to account for SSL_MODE_CBC_RECORD_SPLITTING
rather than the now defunct SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS.
Also remove SSL_OP_TLS_BLOCK_PADDING_BUG. This is to allow for a buggy peer
which pads CBC with N bytes of value N rather than N+1 bytes of value N. This
quirk has been broken since CBC padding checks became constant-time, as
demonstrated by this attempt at a test. (Instead of just decrementing
padding_length, it needs to also keep track of a separate padding_value and not
decrement that one.)
https://boringssl-review.googlesource.com/#/c/1690/
(The quirk would also fall over anyway if the buggy client ever did a session
resumption; then the server speaks first rather than the client, and the quirk
triggered on reading the first encrypted record from the peer.)
Change-Id: I19942dc629a47832aead77a46bb50e0b0a9780b3
Reviewed-on: https://boringssl-review.googlesource.com/1694
Reviewed-by: Adam Langley <agl@google.com>
Configures the SSL stack to log session information to a BIO. The intent is to
support NSS's SSLKEYLOGFILE environment variable. Add support for the same
environment variable to tool/client.cc.
Tested against Wireshark 1.12.0.
BUG=393477
Change-Id: I4c231f9abebf194eb2df4aaeeafa337516774c95
Reviewed-on: https://boringssl-review.googlesource.com/1699
Reviewed-by: Adam Langley <agl@google.com>
Thanks to Denis Denisov for noting that |host_name| could be used while
uninitialised in the resumption case.
While in the area, this change also renames |servername_done| to
something more reasonable and removes a documented value that was never
used. Additionally, the SNI ack was only sent when not resuming so
calculating whether it should be sent when processing ClientHello
extensions (which is after s->hit has been set) is superfluous.
Lastly, since SNI is only acked by servers, there's no need to worry
about the SNI callback returning NOACK in the client case.
Change-Id: Ie4ecfc347bd7afaf93b12526ff9311cc45da4df6
Reviewed-on: https://boringssl-review.googlesource.com/1700
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
Remove the old implementation which was excessively general. This mirrors the
SCT support and adds a single boolean flag to request an OCSP response with no
responder IDs, extensions, or frills. The response, if received, is stored on
the SSL_SESSION so that it is available for (re)validation on session
resumption; Chromium revalidates the saved auth parameters on resume.
Server support is unimplemented for now. This API will also need to be adjusted
in the future if we implement RFC 6961.
Change-Id: I533c029b7f7ea622d814d05f934fdace2da85cb1
Reviewed-on: https://boringssl-review.googlesource.com/1671
Reviewed-by: Adam Langley <agl@google.com>
Don't pollute the embedder's namespace with a session_ctx macro. It looks like
the difference was that, without TLS extensions, session_ctx was ctx rather
than initial_ctx. Now it's always initial_ctx. Retain the semantics of
switching SSL_CTX's out after the fact, until/unless we decide to replace that
with something less scary-sounding.
Change-Id: Ie5df5138aec25218ca80031cf645671968b8a54a
Reviewed-on: https://boringssl-review.googlesource.com/1663
Reviewed-by: Adam Langley <agl@google.com>
Get all this stuff out of the way.
- OPENSSL_NO_MD5
- OPENSSL_NO_SHA
- OPENSSL_NO_EC
- OPENSSL_NO_ECDSA
- OPENSSL_NO_ECDH
- OPENSSL_NO_NEXTPROTONEG
- OPENSSL_NO_DH
- OPENSSL_NO_SSL3
- OPENSSL_NO_RC4
- OPENSSL_NO_RSA
Also manually removed a couple instances of OPENSSL_NO_DSA that seemed to be
confused anyway. Did some minor manual cleanup. (Removed a few now-pointless
'if (0)'s.)
Change-Id: Id540ba97ee22ff2309ab20ceb24c7eabe766d4c4
Reviewed-on: https://boringssl-review.googlesource.com/1662
Reviewed-by: Adam Langley <agl@google.com>
This moves CertificateVerify digest processing to the new
SSL_GET_MESSAGE_DONT_HASH_MESSAGE flag. It also refactors it similarly to
ssl3_send_cert_verify and moves that logic to a common ssl3_cert_verify_hash
function to compute the handshake hash.
This removes a large chunk of duplicate (and divergent!) logic between TLS and
DTLS. It also removes TLS1_FLAGS_KEEP_HANDSHAKE.
Change-Id: Ia63c94f7d76d901bc9c4c33454fbfede411adf63
Reviewed-on: https://boringssl-review.googlesource.com/1633
Reviewed-by: Adam Langley <agl@google.com>
This replaces the special-case in ssl3_get_message for Channel ID. Also add
ssl3_hash_current_message to hash the current message, taking TLS vs DTLS
handshake header size into account.
One subtlety with this flag is that a message intended to be processed with
SSL_GET_MESSAGE_DONT_HASH_MESSAGE cannot follow an optional message
(reprocessed with reuse_message, etc.). There is an assertion to that effect.
If need be, we can loosen it to requiring that the preceeding optional message
also pass SSL_GET_MESSAGE_DONT_HASH_MESSAGE and then maintain some state to
perform the more accurate assertion, but this is sufficient for now.
Change-Id: If8c87342b291ac041a35885b9b5ee961aee86eab
Reviewed-on: https://boringssl-review.googlesource.com/1630
Reviewed-by: Adam Langley <agl@google.com>
DSA is not connected up to EVP, so it wouldn't work anyway. We shouldn't
advertise a cipher suite we don't support. Chrome UMA data says virtually no
handshakes end up negotiating one of these.
Change-Id: I874d934432da6318f05782ebd149432c1d1e5275
Reviewed-on: https://boringssl-review.googlesource.com/1566
Reviewed-by: Adam Langley <agl@google.com>
These are the variants where the CA signs a Diffie-Hellman keypair. They are
not supported by Chrome on NSS.
Change-Id: I569a7ac58454bd3ed1cd5292d1f98499012cdf01
Reviewed-on: https://boringssl-review.googlesource.com/1564
Reviewed-by: Adam Langley <agl@google.com>
This also removes the 'LOW' strength class.
Change-Id: Iffd2356dadb4a4875c1547a613d51061101358fd
Reviewed-on: https://boringssl-review.googlesource.com/1562
Reviewed-by: Adam Langley <agl@google.com>
NULL, SRP, CAMELLIA, export ciphers, SSLv2, IDEA, and SEED are gone. Unknown
directives are silently ignored in the parser, so there is no need to retain
their masks and entries in the cipher suite aliases.
Change-Id: If43b9cbce56b3e1c401db764b88996940452a300
Reviewed-on: https://boringssl-review.googlesource.com/1561
Reviewed-by: Adam Langley <agl@google.com>
This change exports SSL_cutthrough_complete and EVP_EncodedLength (which
were missed below) and also exports all ASN.1 "item" values because
Android needs that.
Change-Id: I6d10f935bb52ed6d682607a4016dd2b87758e3de
Reviewed-on: https://boringssl-review.googlesource.com/1557
Reviewed-by: Adam Langley <agl@google.com>
Just use the normal API for them.
Change-Id: Ibb5988611a86e8d39abda1e02087523d98defb51
Reviewed-on: https://boringssl-review.googlesource.com/1555
Reviewed-by: Adam Langley <agl@google.com>
I see no internal users and the existence of a THIRD version encoding
complicates all version-checking logic. Also convert another version check to
SSL_IS_DTLS that was missed earlier.
Change-Id: I60d215f57d44880f6e6877889307dc39dbf838f7
Reviewed-on: https://boringssl-review.googlesource.com/1550
Reviewed-by: Adam Langley <agl@google.com>
This lets us put the SSL_CIPHER table in the data section. For type-checking,
make STACK_OF(SSL_CIPHER) cast everything to const SSL_CIPHER*.
Note that this will require some changes in consumers which weren't using a
const SSL_CIPHER *.
Change-Id: Iff734ac0e36f9e5c4a0f3c8411c7f727b820469c
Reviewed-on: https://boringssl-review.googlesource.com/1541
Reviewed-by: Adam Langley <agl@google.com>
Of the remaining implementations left, ssl3_, dtls1_, and ssl23_, dtls1_ is
redundant and can be folded into ssl3_. ssl23_ actually isn't; it sets 5
minutes rather than 2 hours. Two hours seems to be what everything else uses
and seems a saner default. Most consumers seem to override it anyway
(SSL_CTX_set_timeout). But it is a behavior change.
The method is called at two points:
- SSL_get_default_timeout
- SSL_CTX_new
Incidentally, the latter call actually makes the former never called internally
and the value it returns a lie. SSL_get_default_timeout returns the default
timeout of the /current/ method, but in ssl_get_new_session, the timeout is
shadowed by session_timeout on the context. That is initialized when
SSL_CTX_new is called. So, unless you go out of your way to
SSL_CTX_set_timeout(0), it always overrides. (And it actually used to a
difference because, for SSL23, the SSL_CTX's method is SSL23, but, when session
creation happens, the SSL's method is the version-specific one.)
Change-Id: I331d3fd69b726242b36492402717b6d0b521c6ee
Reviewed-on: https://boringssl-review.googlesource.com/1521
Reviewed-by: Adam Langley <agl@google.com>
It was added in OpenSSL 1.0.2, so nothing can be depending on it yet. If we
really want a Suite B profile, it seems better to generate a configuration for
the rest of the system rather than pepper the codebase with checks.
Change-Id: I1be3ebed0e87cbfe236ade4174dcf5bbc7e10dd5
Reviewed-on: https://boringssl-review.googlesource.com/1517
Reviewed-by: Adam Langley <agl@google.com>
This is needed by Android because it passes this string to a handshake
callback. It's implemented in Android's OpenSSL in this patch:
https://android.googlesource.com/platform/external/openssl.git/+/master/patches/0003-jsse.patch
(Note that it's called |SSL_authentication_method| there.)
I didn't format this function in OpenSSL style because it's crazy and
because we'll probably clang-format ssl/ soon.
Change-Id: I865540511b50859c339da5d76ce37810449aa444
Android needs this and it was patched into their OpenSSL in
https://android.googlesource.com/platform/external/openssl.git/+/master/patches/0003-jsse.patch
It appears that this is needed because javax.net.ssl.SSLEngine has it as
part of its interface and thus it's part of the Android API. No idea why
anything would ever want to disable that though.
Change-Id: I9c6279a961637f44936889edbe269b9d5c19746d
ssl23_get_client_hello has lots of remnants of SSLv2 support and remnants of an
even older SSL_OP_NON_EXPORT_FIRST option (see upstream's
d92f0bb6e9ed94ac0c3aa0c939f2565f2ed95935) which complicates the logic.
Split it into three states and move V2ClientHello parsing into its own
function. Port it to CBS and CBB to give bounds checks on the V2ClientHello
parse.
This fixes a minor bug where, if the SSL_accept call in ssl23_get_client_hello
failed, cb would not be NULL'd and SSL_CB_ACCEPT_LOOP would get reported an
extra time.
It also unbreaks the invariant between s->packet, s->packet_length,
s->s3->rbuf.buf, and s->s3->rbuf.offset at the point the switch, although this
was of no consequence because the first ssl3_read_n call passes extend = 0
which resets s->packet and s->packet_length.
It also makes us tolerant to major version bumps in the ClientHello. Add tests
for TLS tolerance of both minor and major version bumps as well as the HTTP
request error codes.
Change-Id: I948337f4dc483f4ebe1742d3eba53b045b260257
Reviewed-on: https://boringssl-review.googlesource.com/1455
Reviewed-by: Adam Langley <agl@google.com>
Windows doesn't have ssize_t, sadly. There's SSIZE_T, but defining an
OPENSSL_SSIZE_T seems worse than just using an int.
Change-Id: I09bb5aa03f96da78b619e551f92ed52ce24d9f3f
Reviewed-on: https://boringssl-review.googlesource.com/1352
Reviewed-by: Adam Langley <agl@google.com>
It's not part of SSL_OP_ALL and is unused, so remove it. Add a test that
asserts the version check works.
Change-Id: I917516594ec5a4998a8316782f035697c33d99b0
Reviewed-on: https://boringssl-review.googlesource.com/1418
Reviewed-by: Adam Langley <agl@google.com>
The memory freelist maintained by OpenSSL claims to be a performance
optimization for platforms that have a slow malloc/free
implementation. This should not be the case on modern
linux/glibc. Remove the freelist as it poses a potential security
hazard of buffer-reuse that is of "initialized" memory that will not
be caught be tools such as valgrind.
Change-Id: I3cfa6a05f9bdfbbba7820060bae5a673dee43014
Reviewed-on: https://boringssl-review.googlesource.com/1385
Reviewed-by: Adam Langley <agl@google.com>
This change marks public symbols as dynamically exported. This means
that it becomes viable to build a shared library of libcrypto and libssl
with -fvisibility=hidden.
On Windows, one not only needs to mark functions for export in a
component, but also for import when using them from a different
component. Because of this we have to build with
|BORINGSSL_IMPLEMENTATION| defined when building the code. Other
components, when including our headers, won't have that defined and then
the |OPENSSL_EXPORT| tag becomes an import tag instead. See the #defines
in base.h
In the asm code, symbols are now hidden by default and those that need
to be exported are wrapped by a C function.
In order to support Chromium, a couple of libssl functions were moved to
ssl.h from ssl_locl.h: ssl_get_new_session and ssl_update_cache.
Change-Id: Ib4b76e2f1983ee066e7806c24721e8626d08a261
Reviewed-on: https://boringssl-review.googlesource.com/1350
Reviewed-by: Adam Langley <agl@google.com>
Chromium is no longer using it.
Change-Id: If56340627d2024ff3fb8561405dd0cfc6f4787cb
Reviewed-on: https://boringssl-review.googlesource.com/1346
Reviewed-by: Adam Langley <agl@google.com>
Now that the flag is set accurately, use it to enforce that the handshake and
CCS synchronization. If EXPECT_CCS is set, enforce that:
(a) No handshake records may be received before ChangeCipherSpec.
(b) There is no pending handshake data at the point EXPECT_CCS is set.
Change-Id: I04b228fe6a7a771cf6600b7d38aa762b2d553f08
Reviewed-on: https://boringssl-review.googlesource.com/1299
Reviewed-by: Adam Langley <agl@google.com>
SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG and
SSL_OP_NETSCAPE_DEMO_CIPHER_CHANGE_BUG. Neither of them have code that's even
enabled.
Change-Id: I866aabe1aa37e8ee145aaeaecaff6704c3ad21bc
Reviewed-on: https://boringssl-review.googlesource.com/1284
Reviewed-by: Adam Langley <agl@google.com>
Also fix a place where fixes for the condition for sending ServerKeyExchange in
s3_srvr.c were never propogated to d1_srvr.c. Tidy up that logic to use
ssl_cipher_requires_server_key_exchange and simplify the PSK check.
Change-Id: Ie36d378f733e59a8df405bc869f2346af59bd574
Reviewed-on: https://boringssl-review.googlesource.com/1283
Reviewed-by: Adam Langley <agl@google.com>
This removes support code for a "stream_mac" mode only used by GOST. Also get
rid of this
/* I should fix this up TLS TLS TLS TLS TLS XXXXXXXX */
comment next to it. It's not actually related to GOST (dates to OpenSSL initial
commit), but isn't especially helpful at this point.
Change-Id: Ib13c6e27e16e0d1fb59ed0142ddf913b9abc20b7
Reviewed-on: https://boringssl-review.googlesource.com/1281
Reviewed-by: Adam Langley <agl@google.com>
Some ssl23 functions that can be folded into ssl3, declarations and macros that
don't exist anymore.
Change-Id: I8057fb0bab8b6fe7e4da7b90a4945f7f22e29cd9
Reviewed-on: https://boringssl-review.googlesource.com/1280
Reviewed-by: Adam Langley <agl@google.com>
Without SSLv2, all cipher suite values are 2 bytes. Represent them as a
uint16_t and make all functions pass those around rather than pointers.
This removes SSL_CIPHER_find as it's unused.
Change-Id: Iea0b75abee4352a8333a4b8e39a161430ae55ea6
Reviewed-on: https://boringssl-review.googlesource.com/1259
Reviewed-by: Adam Langley <agl@google.com>
Don't retain curve IDs in serialized form; serialization only happens when
writing and reading from the wire. The internal representation is a uint16_t
which matches the range of the value and avoids all the checks for the first
byte being 0.
This also fixes a bug in tls1_check_ec_tmp_key's suite B logic; the || should
have been &&, though now it's gone.
This doesn't relieve some of the other assumptions about curve IDs:
tls1_set_curves still assumes that all curve IDs are under 32, and
tls1_ec_curve_id2nid still assumes 0 is not a valid curve ID. Add a
compile-time assert and a comment to document this. We're up to 28 now, so this
may well need to be revised sooner or later.
Remove SSL_get_shared_curve as it's new and unused API, using it in a loop is
O(N^3), and lets us simplify a function.
Change-Id: I82778cb82648d82f7b5de8c5341e0e1febdf5611
Reviewed-on: https://boringssl-review.googlesource.com/1256
Reviewed-by: Adam Langley <agl@google.com>
SSL reason codes corresponding to alerts have special values. Teach
make_errors.go that values above 1000 are reserved (otherwise it will assign
new values in that namespace). Also fix all the existing reason codes which
corresponded to alerts.
Change-Id: Ieabdf8fd59f4802938616934e1d84e659227cf84
Reviewed-on: https://boringssl-review.googlesource.com/1212
Reviewed-by: Adam Langley <agl@google.com>
More consistent with ssl3_send_server_key_exchange and the message name.
Change-Id: If0f435a89bdf117297d349099708fff0bd5a6e98
Reviewed-on: https://boringssl-review.googlesource.com/1170
Reviewed-by: Adam Langley <agl@google.com>
Previously, public headers lived next to the respective code and there
were symlinks from include/openssl to them.
This doesn't work on Windows.
This change moves the headers to live in include/openssl. In cases where
some symlinks pointed to the same header, I've added a file that just
includes the intended target. These cases are all for backwards-compat.
Change-Id: I6e285b74caf621c644b5168a4877db226b07fd92
Reviewed-on: https://boringssl-review.googlesource.com/1180
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
Initial fork from f2d678e6e89b6508147086610e985d4e8416e867 (1.0.2 beta).
(This change contains substantial changes from the original and
effectively starts a new history.)
