These are more pretty-printers for generic ASN.1 structures. They're never
called externally and otherwise are only used in the X509V3_EXT_PARSE_UNKNOWN
mode for the X509 pretty-print functions. That makes unknown extensions
pretty-print as ASN.1 structures.
This is a rather useless feature, so have that fall through to
X509V3_EXT_DUMP_UNKNOWN which does a hexdump instead.
(The immediate trigger is I don't know what |op| is in upstream's
8c918b7b9c93ba38790ffd1a83e23c3684e66f57 and don't think it is worth the time
to puzzle that out and verify it. Better ditch this code completely.)
Change-Id: I0217906367d83056030aea64ef344d4fedf74763
Reviewed-on: https://boringssl-review.googlesource.com/8243
Reviewed-by: David Benjamin <davidben@google.com>
These functions are never instantiated. (They're a remnant of the PKCS#7 and
CMS bits.) Next time upstream touches this code, we don't have to puzzle
through the diff and import it.
Change-Id: I67c2102ae13e8e0527d858e1c63637dd442a4ffb
Reviewed-on: https://boringssl-review.googlesource.com/8242
Reviewed-by: David Benjamin <davidben@google.com>
There's a __pragma expression which allows this. Android builds us Windows with
MinGW for some reason, so we actually do have to tolerate non-MSVC-compatible
Windows compilers. (Clang for Windows is much more sensible than MinGW and
intentionally mimicks MSVC.)
MinGW doesn't understand MSVC's pragmas and warns a lot. #pragma warning is
safe to suppress, so wrap those to shush them. This also lets us do away with a
few ifdefs.
Change-Id: I1f5a8bec4940d4b2d947c4c1cc9341bc15ec4972
Reviewed-on: https://boringssl-review.googlesource.com/8236
Reviewed-by: Adam Langley <agl@google.com>
While most of OpenSSL's assembly allows out < in too, some of it doesn't.
Upstream seems to not consider this a problem (or, at least, they're failing to
make a decision on whether it is a problem, so we should assume they'll stay
their course). Accordingly, require aliased buffers to exactly align so we
don't have to keep chasing this down.
Change-Id: I00eb3df3e195b249116c68f7272442918d7077eb
Reviewed-on: https://boringssl-review.googlesource.com/8231
Reviewed-by: Adam Langley <agl@google.com>
Set ctx->error = X509_V_ERR_OUT_OF_MEM when verification cannot
continue due to malloc failure. Similarly for issuer lookup failures
and caller errors (bad parameters or invalid state).
Also, when X509_verify_cert() returns <= 0 make sure that the
verification status does not remain X509_V_OK, as a last resort set
it it to X509_V_ERR_UNSPECIFIED, just in case some code path returns
an error without setting an appropriate value of ctx->error.
Add new and some missing error codes to X509 error -> SSL alert switch.
(Imported from upstream's 5553a12735e11bc9aa28727afe721e7236788aab.)
Change-Id: I3231a6b2e72a3914cb9316b8e90ebaee009a1c5f
Reviewed-on: https://boringssl-review.googlesource.com/8170
Reviewed-by: David Benjamin <davidben@google.com>
This callback is used by BoringSSL tests in order to simulate the time,
so that the tests have repeatable results. This API will allow consumers
of BoringSSL to write the same sort of tests.
Change-Id: I79d72bce5510bbd83c307915cd2cc937579ce948
Reviewed-on: https://boringssl-review.googlesource.com/8200
Reviewed-by: David Benjamin <davidben@google.com>
Match the actual name of the type.
Change-Id: I0ad27196ee2876ce0690d13068fa95f68b05b0da
Reviewed-on: https://boringssl-review.googlesource.com/8187
Reviewed-by: David Benjamin <davidben@google.com>
There's only one thing under "SNI Extension".
Change-Id: I8d8c54c286cb5775a20c4e2623896eb9be2f0009
Reviewed-on: https://boringssl-review.googlesource.com/8181
Reviewed-by: David Benjamin <davidben@google.com>
The business with ssl_record_prefix_len is rather a hassle. Instead, have
tls_open_record always decrypt in-place and give back a CBS to where the body
is.
This way the caller doesn't need to do an extra check all to avoid creating an
invalid pointer and underflow in subtraction.
Change-Id: I4e12b25a760870d8f8a503673ab00a2d774fc9ee
Reviewed-on: https://boringssl-review.googlesource.com/8173
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
The two modes are quite different. One of them requires the BIO honor an
extra BIO_ctrl. Also add an explanation at the top of
addDTLSRetransmitTests for how these tests work. The description is
scattered across many different places.
BUG=63
Change-Id: Iff4cdd1fbf4f4439ae0c293f565eb6780c7c84f9
Reviewed-on: https://boringssl-review.googlesource.com/8121
Reviewed-by: David Benjamin <davidben@google.com>
More spring-cleaning of unnecessary incompatibilities. Since
OpenSSL_add_all_algorithms_conf doesn't specify a configuration file, it's
perfectly sound to have such a function.
Dear BoringSSL, please add all algorithms.
Uh, sure. They were already all there, but I have added them!
PS: Could you also load all your configuration files while you're at it.
...I don't have any. Fine. I have loaded all configuration files which I
recognize. *mutters under breath* why does everyone ask all these strange
questions...
Change-Id: I57f956933d9e519445bf22f89853bd5f56904172
Reviewed-on: https://boringssl-review.googlesource.com/8160
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
The fake numbers collide with other numbers defined below. Also PUSH and POP
are actually used. DUP legitimately isn't though.
Change-Id: Iaa15a065d846b89b9b7958b78068393cfee2bd6f
Reviewed-on: https://boringssl-review.googlesource.com/8143
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Some OpenSSL consumers use them, so provide no-op versions to make porting code
easier.
Change-Id: I4348568c1cb08d2b2c0a9ec9a17e2c0449260965
Reviewed-on: https://boringssl-review.googlesource.com/8142
Reviewed-by: David Benjamin <davidben@google.com>
Make building against software that expects OpenSSL easier.
Change-Id: I1af090ae8208218d6e226ee0baf51053699d85cc
Reviewed-on: https://boringssl-review.googlesource.com/8141
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
doc.go is still a little unhappy.
Change-Id: I5a8f3da91dabb45d29d0e08f13b7dabdcd521c38
Reviewed-on: https://boringssl-review.googlesource.com/8145
Reviewed-by: David Benjamin <davidben@google.com>
One of these tests the distribution of noise polynomials; the other
tests that that agreed-upon keys (prior to whitening) have roughly equal
numbers of 0s and 1s.
Along the way, expose a few more API bits.
Change-Id: I6b04708d41590de45d82ea95bae1033cfccd5d67
Reviewed-on: https://boringssl-review.googlesource.com/8130
Reviewed-by: Adam Langley <agl@google.com>
This commit adds coverage of the "offer" (first) step, as well as
testing all outputs of the "accept" (second) step, not just the shared
key.
Change-Id: Id11fe24029abc302442484a6c01fa496a1578b3a
Reviewed-on: https://boringssl-review.googlesource.com/8100
Reviewed-by: Adam Langley <agl@google.com>
This keeps the naming convention in line with the actual spec.
Change-Id: I34673f78dbc29c1659b4da0e49677ebe9b79636b
Reviewed-on: https://boringssl-review.googlesource.com/8090
Reviewed-by: David Benjamin <davidben@google.com>
The test vectors are taken from the reference implementation, modified
to output the results of its random-number generator, and the results of
key generation prior to SHA3. This allows the interoperability of the
two implementations to be tested somewhat.
To accomplish the testing, this commit creates a new, lower-level API
that leaves the generation of random numbers and all wire encoding and
decoding up to the caller.
Change-Id: Ifae3517696dde4be4a0b7c1998bdefb789bac599
Reviewed-on: https://boringssl-review.googlesource.com/8070
Reviewed-by: Adam Langley <agl@google.com>
Now that we no longer support Windows XP, this is available.
Unfortunately, the public header version of CRYPTO_MUTEX means we
still can't easily merge CRYPTO_MUTEX and CRYPTO_STATIC_MUTEX.
BUG=37
Change-Id: If309de3f06e0854c505083b72fd64d1dbb3f4563
Reviewed-on: https://boringssl-review.googlesource.com/8081
Reviewed-by: Adam Langley <agl@google.com>
This is easier to deploy, and more obvious. This commit reverts a few
pieces of e25775bc, but keeps most of it.
Change-Id: If8d657a4221c665349c06041bb12fffca1527a2c
Reviewed-on: https://boringssl-review.googlesource.com/8061
Reviewed-by: Adam Langley <agl@google.com>
This code has caused a long history of problems. This change rewrites it
completely with something that is, hopefully, much simplier and robust
and adds more testing.
Change-Id: Ibeef51f9386afd95d5b73316e451eb3a2d7ec4e0
Reviewed-on: https://boringssl-review.googlesource.com/8033
Reviewed-by: Adam Langley <agl@google.com>
Constants representing TLS 1.3 are added to allow for future work to be
flagged on TLS1_3_VERSION. To prevent BoringSSL from negotiating the
non-existent TLS 1.3 version, it is explicitly disabled using
SSL_OP_NO_TLSv1_3.
Change-Id: Ie5258a916f4c19ef21646c4073d5b4a7974d6f3f
Reviewed-on: https://boringssl-review.googlesource.com/8041
Reviewed-by: Adam Langley <agl@google.com>
This renames the Channel ID EncryptedExtensions message to allow for
compatibility with TLS 1.3 EncryptedExtensions.
Change-Id: I5b67d00d548518045554becb1b7213fba86731f2
Reviewed-on: https://boringssl-review.googlesource.com/8040
Reviewed-by: Adam Langley <agl@google.com>
OpenSSL's bbio logic is kind of crazy. It would be good to eventually do the
buffering in a better way (notably, bbio is fragile, if not outright broken,
for DTLS). In the meantime, this fixes a number of bugs where the existence of
bbio was leaked in the public API and broke things.
- SSL_get_wbio returned the bbio during the handshake. It must always return
the BIO the consumer configured. In doing so, internal accesses of
SSL_get_wbio should be switched to ssl->wbio since those want to see bbio.
For consistency, do the same with rbio.
- The logic in SSL_set_rfd, etc. (which I doubt is quite right since
SSL_set_bio's lifetime is unclear) would get confused once wbio got wrapped.
Those want to compare to SSL_get_wbio.
- If SSL_set_bio was called mid-handshake, bbio would get disconnected and lose
state. It forgets to reattach the bbio afterwards. Unfortunately, Conscrypt
does this a lot. It just never ended up calling it at a point where the bbio
would cause problems.
- Make more explicit the invariant that any bbio's which exist are always
attached. Simplify a few things as part of that.
Change-Id: Ia02d6bdfb9aeb1e3021a8f82dcbd0629f5c7fb8d
Reviewed-on: https://boringssl-review.googlesource.com/8023
Reviewed-by: Kenny Root <kroot@google.com>
Reviewed-by: Adam Langley <agl@google.com>
The 'elliptic_curves' extension is being renamed to 'supported_groups'
in the TLS 1.3 draft, and most of the curve-specific methods are
generalized to groups/group IDs.
Change-Id: Icd1a1cf7365c8a4a64ae601993dc4273802610fb
Reviewed-on: https://boringssl-review.googlesource.com/7955
Reviewed-by: David Benjamin <davidben@google.com>
open_iscsi assumes that it can get |OPENSSL_malloc| after including only
pem.h and err.h. Since pem.h already includes quite a lot, this change
adds crypto.h to that set so that open_iscsi is happy.
Change-Id: I6dc06c27088ce3ca46c1ab53bb29650033cba267
Reviewed-on: https://boringssl-review.googlesource.com/8031
Reviewed-by: David Benjamin <davidben@google.com>
The key schedule in TLS 1.3 requires a separate Extract and Expand phase
for the cryptographic computations.
Change-Id: Ifdac1237bda5212de5d4f7e8db54e202151d45ec
Reviewed-on: https://boringssl-review.googlesource.com/7983
Reviewed-by: David Benjamin <davidben@google.com>
CECPQ1 is a new key exchange that concatenates the results of an X25519
key agreement and a NEWHOPE key agreement.
Change-Id: Ib919bdc2e1f30f28bf80c4c18f6558017ea386bb
Reviewed-on: https://boringssl-review.googlesource.com/7962
Reviewed-by: David Benjamin <davidben@google.com>
This is consistent with the new convention in ssl_ecdh.c.
Along the way, change newhope_test.c to not iterate 1000 times over each
test.
Change-Id: I7a500f45b838eba8f6df96957891aa8e880ba089
Reviewed-on: https://boringssl-review.googlesource.com/8012
Reviewed-by: David Benjamin <davidben@google.com>
We don't have any of these.
Change-Id: I8d12284fbbab0ff35ac32d35a5f2eba326ab79f8
Reviewed-on: https://boringssl-review.googlesource.com/7981
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
They're completely unused now. The handshake message reassembly logic should
not depend on the state machine. This should partially free it up (ugly as it
is) to be shared with a future TLS 1.3 implementation while, in parallel, it
and the layers below, get reworked. This also cuts down on the number of states
significantly.
Partially because I expect we'd want to get ssl_hash_message_t out of there
too. Having it in common code is fine, but it needs to be in the (supposed to
be) protocol-agnostic handshake state machine, not the protocol-specific
handshake message layer.
Change-Id: I12f9dc57bf433ceead0591106ab165d352ef6ee4
Reviewed-on: https://boringssl-review.googlesource.com/7949
Reviewed-by: Adam Langley <agl@google.com>
Rather than this confusing coordination with the handshake state machine and
init_num changing meaning partway through, use the length field already in
BUF_MEM. Like the new record layer parsing, is no need to keep track of whether
we are reading the header or the body. Simply keep extending the handshake
message until it's far enough along.
ssl3_get_message still needs tons of work, but this allows us to disentangle it
from the handshake state.
Change-Id: Ic2b3e7cfe6152a7e28a04980317d3c7c396d9b08
Reviewed-on: https://boringssl-review.googlesource.com/7948
Reviewed-by: Adam Langley <agl@google.com>
BUF_MEM is actually a rather silly API for the SSL stack. There's separate
length and max fields, but init_buf effectively treats length as max and max as
nothing.
We possibly don't want to be using it long-term anyway (if nothing else, the
char*/uint8_t* thing is irritating), but in the meantime, it'll be easier to
separately fix up get_message's book-keeping and state tracking from where the
handshake gets its messages from.
Change-Id: I9e56ea008173991edc8312ec707505ead410a9ee
Reviewed-on: https://boringssl-review.googlesource.com/7947
Reviewed-by: Adam Langley <agl@google.com>
The existing logic gets confused in a number of cases around close_notify vs.
fatal alert. SSL_shutdown, while still pushing to the error queue, will fail to
notice alerts. We also get confused if we try to send a fatal alert when we've
already sent something else.
Change-Id: I9b1d217fbf1ee8a9c59efbebba60165b7de9689e
Reviewed-on: https://boringssl-review.googlesource.com/7952
Reviewed-by: David Benjamin <davidben@google.com>
This function will return whether BoringSSL was built with
OPENSSL_NO_ASM. This will allow us to write a test in our internal
codebase which asserts that normal builds should always have assembly
code included.
Change-Id: Ib226bf63199022f0039d590edd50c0cc823927b9
Reviewed-on: https://boringssl-review.googlesource.com/7960
Reviewed-by: David Benjamin <davidben@google.com>
This function is only really useful for DSA signature verification,
which is something that isn't performance-sensitive. Replace its
optimized implementation with a naïve implementation that's much
simpler.
Note that it would be simpler to use |BN_mod_mul| in the new
implementation; |BN_mod_mul_montgomery| is used instead only to be
consistent with other work being done to replace uses of non-Montgomery
modular reduction with Montgomery modular reduction.
Change-Id: If587d463b73dd997acfc5b7ada955398c99cc342
Reviewed-on: https://boringssl-review.googlesource.com/7732
Reviewed-by: David Benjamin <davidben@google.com>
sk_FOO_num may be called on const stacks. Given that was wrong, I suspect no
one ever uses a const STACK_OF(T)...
Other macros were correctly const, but were casting the constness a way (only
to have it come back again).
Also remove the extra newline after a group. It seems depending on which
version of clang-format was being used, we'd either lose or keep the extra
newline. The current file doesn't have them, so settle on that.
Change-Id: I19de6bc85b0a043d39c05ee3490321e9f0adec60
Reviewed-on: https://boringssl-review.googlesource.com/7946
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
The array is of size two for the level and description, not because we allow
two alerts outstanding; we don't.
Change-Id: I25e42c059ce977a947397a3dc83e9684bc8f0595
Reviewed-on: https://boringssl-review.googlesource.com/7940
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
|BN_mod_exp_mont_word| is only useful when the base is a single word
in length and timing side channel protection of the exponent is not
needed. That's never the case in real life.
Keep the function in the API, but removes its single-word-base
optimized implementation with a call to |BN_mod_exp_mont|.
Change-Id: Ic25f6d4f187210b681c6ee6b87038b64a5744958
Reviewed-on: https://boringssl-review.googlesource.com/7731
Reviewed-by: David Benjamin <davidben@google.com>
This allows an application to override the default of 1 second, which
is what's instructed in RFC 6347 but is not an absolute requirement.
Change-Id: I0bbb16e31990fbcab44a29325b6ec7757d5789e5
Reviewed-on: https://boringssl-review.googlesource.com/7930
Reviewed-by: David Benjamin <davidben@google.com>
Also add a test.
This is the last of the openssl/asn1.h includes from the directories that are
to be kept in the core libcrypto library. (What remains is to finish sorting
out the crypto/obj stuff. We'll also want to retain a decoupled version of the
PKCS#12 stuff.)
Functions that need to be audited for reuse:
i2d_DHparams
BUG=54
Change-Id: Ibef030a98d3a93ae26e8e56869f14858ec75601b
Reviewed-on: https://boringssl-review.googlesource.com/7900
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
The BORINGSSL_YYYYMM #defines have served well to coordinate short-term skews
in BoringSSL's public API, but some consumers (notably wpa_supplicant in
Android) wish to build against multiple versions for an extended period of
time. Consumers should not do this unless there is no alternative, but to
accommodate this, start a BORINGSSL_API_VERSION counter. In future, instead of
BORINGSSL_YYYYMM #defines, we'll simply increment the number.
This is specifically called an "API version" rather than a plain "version" as
this number does not denote any particular point in development or stability.
It purely counts how many times we found it convenient to let the preprocessor
observe a public API change up to now.
Change-Id: I39f9740ae8e793cef4c2b5fb5707b9763b3e55ce
Reviewed-on: https://boringssl-review.googlesource.com/7870
Reviewed-by: Adam Langley <agl@google.com>
