This uses the x86 trap flag and libunwind to test CFI works at each
instruction. For now, it just uses the system one out of pkg-config and
disables unwind tests if unavailable. We'll probably want to stick a
copy into //third_party and perhaps try the LLVM one later.
This tester caught two bugs in P-256 CFI annotations already:
I47b5f9798b3bcee1748e537b21c173d312a14b42 and
I9f576d868850312d6c14d1386f8fbfa85021b347
An earlier design used PTRACE_SINGLESTEP with libunwind's remote
unwinding features. ptrace is a mess around stop signals (see group-stop
discussion in ptrace(2)) and this is 10x faster, so I went with it. The
question of which is more future-proof is complex:
- There are two libunwinds with the same API,
https://www.nongnu.org/libunwind/ and LLVM's. This currently uses the
system nongnu.org for convenience. In future, LLVM's should be easier
to bundle (less complex build) and appears to even support Windows,
but I haven't tested this. Moreover, setting the trap flag keeps the
test single-process, which is less complex on Windows. That suggests
the trap flag design and switching to LLVM later. However...
- Not all architectures have a trap flag settable by userspace. As far
as I can tell, ARMv8's PSTATE.SS can only be set from the kernel. If
we stick with nongnu.org libunwind, we can use PTRACE_SINGLESTEP and
remote unwinding. Or we implement it for LLVM. Another thought is for
the ptracer to bounce SIGTRAP back into the process, to share the
local unwinding code.
- ARMv7 has no trap flag at all and PTRACE_SINGLESTEP fails. Debuggers
single-step by injecting breakpoints instead. However, ARMv8's trap
flag seems to work in both AArch32 and AArch64 modes, so we may be
able to condition it on a 64-bit kernel.
Sadly, neither strategy works with Intel SDE. Adding flags to cpucap
vectors as we do with ARM would help, but it would not emulate CPUs
newer than the host CPU. For now, I've just had SDE tests disable these.
Annoyingly, CMake does not allow object libraries to have dependencies,
so make test_support a proper static library. Rename the target to
test_support_lib to avoid
https://gitlab.kitware.com/cmake/cmake/issues/17785
Update-Note: This adds a new optional test dependency, but it's disabled
by default (define BORINGSSL_HAVE_LIBUNWIND), so consumers do not need
to do anything. We'll probably want to adjust this in the future.
Bug: 181
Change-Id: I817263d7907aff0904a9cee83f8b26747262cc0c
Reviewed-on: https://boringssl-review.googlesource.com/c/33966
Commit-Queue: David Benjamin <davidben@google.com>
Reviewed-by: Adam Langley <agl@google.com>
Postgres contains a “pqcrypto” module that showcases the worst of 90's
crypto, including Blowfish and CAST5 in CFB, CBC, and ECB modes. (Also,
64-bit keys for both of those.)
In order to minimise the patching needed to build Postgres, put these
things in decrepit.
Change-Id: I8390c5153dd7227eef07293a4363878d79df8b21
Reviewed-on: https://boringssl-review.googlesource.com/c/34044
Reviewed-by: Adam Langley <agl@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: Adam Langley <agl@google.com>
- In base.h, if BORINGSSL_PREFIX is defined, include
boringssl_prefix_symbols.h
- In all .S files, if BORINGSSL_PREFIX is defined, include
boringssl_prefix_symbols_asm.h
- In base.h, BSSL_NAMESPACE_BEGIN and BSSL_NAMESPACE_END are
defined with appropriate values depending on whether
BORINGSSL_PREFIX is defined; these macros are used in place
of 'namespace bssl {' and '}'
- Add util/make_prefix_headers.go, which takes a list of symbols
and auto-generates the header files mentioned above
- In CMakeLists.txt, if BORINGSSL_PREFIX and BORINGSSL_PREFIX_SYMBOLS
are defined, run util/make_prefix_headers.go to generate header
files
- In various CMakeLists.txt files, add "global_target" that all
targets depend on to give us a place to hook logic that must run
before all other targets (in particular, the header file generation
logic)
- Document this in BUILDING.md, including the fact that it is
the caller's responsibility to provide the symbol list and keep it
up to date
- Note that this scheme has not been tested on Windows, and likely
does not work on it; Windows support will need to be added in a
future commit
Change-Id: If66a7157f46b5b66230ef91e15826b910cf979a2
Reviewed-on: https://boringssl-review.googlesource.com/31364
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Reviewed-by: David Benjamin <davidben@google.com>
We currently write a mix of "if (FOO)" and "if(FOO)". While the former looks
more like a usual language, CMake believes everything, even "if" and "else", is
just a really really funny function call (a "command").
We should pick something for consistency. Upstream CMake writes "if(FOO)", so
go with that one.
Change-Id: I67e0eb650a52670110b417312a362c9f161c8721
Reviewed-on: https://boringssl-review.googlesource.com/30807
Reviewed-by: Adam Langley <agl@google.com>
CMake targets are visible globally but gtest_main has boringssl-specific
behavior that isn't appropriate for general use.
This change makes it possible to use boringssl and abseil-cpp in the
same project (since abseil-cpp expects gtest_main to exist and be useful
for its own tests).
Change-Id: Icc81c11b8bb4b1e21cea7c9fa725b6c082bd5369
Reviewed-on: https://boringssl-review.googlesource.com/24604
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Change-Id: I37a438b5b4b18d18756ba4aeb9f8548caa333981
Reviewed-on: https://boringssl-review.googlesource.com/20384
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This is purely to support curl, which now has HTTPS proxy support that,
sadly, uses the BIO SSL. Don't use the BIO SSL for anything else.
Change-Id: I9ef6c9773ec87a11e0b5a93968386ac4b351986d
Reviewed-on: https://boringssl-review.googlesource.com/13600
Commit-Queue: Adam Langley <agl@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
For now, this is the laziest conversion possible. The intent is to just
get the build setup ready so that we can get everything working in our
consumers. The intended end state is:
- The standalone build produces three test targets, one per library:
{crypto,ssl,decrepit}_tests.
- Each FOO_test is made up of:
FOO/**/*_test.cc
crypto/test/gtest_main.cc
test_support
- generate_build_files.py emits variables crypto_test_sources and
ssl_test_sources. These variables are populated with FindCFiles,
looking for *_test.cc.
- The consuming file assembles those variables into the two test targets
(plus decrepit) from there. This avoids having generate_build_files.py
emit actual build rules.
- Our standalone builders, Chromium, and Android just run the top-level
test targets using whatever GTest-based reporting story they have.
In transition, we start by converting one of two tests in each library
to populate the three test targets. Those are added to all_tests.json
and all_tests.go hacked to handle them transparently. This keeps our
standalone builder working.
generate_build_files.py, to start with, populates the new source lists
manually and subtracts them out of the old machinery. We emit both for
the time being. When this change rolls in, we'll write all the build
glue needed to build the GTest-based tests and add it to consumers'
continuous builders.
Next, we'll subsume a file-based test and get the consumers working with
that. (I.e. make sure the GTest targets can depend on a data file.)
Once that's all done, we'll be sure all this will work. At that point,
we start subsuming the remaining tests into the GTest targets and,
asynchronously, rewriting tests to use GTest properly rather than
cursory conversion here.
When all non-GTest tests are gone, the old generate_build_files.py hooks
will be removed, consumers updated to not depend on them, and standalone
builders converted to not rely on all_tests.go, which can then be
removed. (Unless bits end up being needed as a malloc test driver. I'm
thinking we'll want to do something with --gtest_filter.)
As part of this CL, I've bumped the CMake requirements (for
target_include_directories) and added a few suppressions for warnings
that GTest doesn't pass.
BUG=129
Change-Id: I881b26b07a8739cc0b52dbb51a30956908e1b71a
Reviewed-on: https://boringssl-review.googlesource.com/13232
Reviewed-by: Adam Langley <agl@google.com>
A recent change to curl[1] added support for HTTPS proxies, which
involves running a TLS connection inside another TLS connection. This
was done by using SSL BIOs, which we removed from BoringSSL for being
crazy.
This change adds a stripped-down version of the SSL BIO to decrepit in
order to suport curl.
[1] cb4e2be7c6
Change-Id: I9cb8f2db5b28a5a70724f6f93544297c380ac124
Reviewed-on: https://boringssl-review.googlesource.com/12631
Reviewed-by: Adam Langley <agl@google.com>
There was only one function that required BoringSSL to know how to read
directories. Unfortunately, it does have some callers and it's not immediately
obvious whether the code is unreachable. Rather than worry about that, just
toss it all into decrepit.
In doing so, do away with the Windows and PNaCl codepaths. Only implement
OPENSSL_DIR_CTX on Linux.
Change-Id: Ie64d20254f2f632fadc3f248bbf5a8293ab2b451
Reviewed-on: https://boringssl-review.googlesource.com/7661
Reviewed-by: Adam Langley <agl@google.com>
There was only one function that required BoringSSL to know how to read
directories. Unfortunately, it does have some callers and it's not immediately
obvious whether the code is unreachable. Rather than worry about that, just
toss it all into decrepit.
In doing so, do away with the Windows and PNaCl codepaths. Only implement
OPENSSL_DIR_CTX on Linux.
Change-Id: I3eb55b098e3aa042b422bb7da115c0812685553e
This makes building OpenLDAP easier.
Change-Id: Id64699f95477fb8fb98957027c97070ebf41f4b1
Reviewed-on: https://boringssl-review.googlesource.com/7407
Reviewed-by: David Benjamin <davidben@google.com>
libdecrepit wants some symbols visible. Also a build file typo.
Change-Id: I670d2324ab9048f84e7f80afdefc98cbab80335d
Reviewed-on: https://boringssl-review.googlesource.com/7411
Reviewed-by: Adam Langley <agl@google.com>
This another of those functions that tries to turn C into Python. In
this case, implement it in terms of the similar functions in EVP so that
at least we only have one list of things.
This makes life with nmap easier.
Change-Id: I6d01c43f062748d4ba7d7020587c286322e610bb
Reviewed-on: https://boringssl-review.googlesource.com/7403
Reviewed-by: David Benjamin <davidben@google.com>
This version is taken from OpenSSL 1.0.2 with tweaks to support the
changes that we have made to md32_common.h. None of the assembly
implementations have been imported.
This makes supporting nmap easier.
Change-Id: Iae9241abdbc9021cc6bc35a65b40c3d739011ccc
Reviewed-on: https://boringssl-review.googlesource.com/7402
Reviewed-by: David Benjamin <davidben@google.com>
I've no idea who thought that this function was a good idea in the first
place, but including it in decrepit makes supporting nmap easier.
Change-Id: I7433cda6a6ddf1cc545126edf779625e9fc70ada
Reviewed-on: https://boringssl-review.googlesource.com/7401
Reviewed-by: David Benjamin <davidben@google.com>
This function is a deprecated version of |X509_EXT_nconf_nid| that takes
a hash of |CONF_VALUE|s directly rather than a |CONF|.
Change-Id: I5fd1025b31d73b988d9298b2624453017dd34ff4
Reviewed-on: https://boringssl-review.googlesource.com/7363
Reviewed-by: David Benjamin <davidben@google.com>
This function was deprecated by OpenSSL in 0.9.8 but code that uses it
still exists. This change adds an implementation of this function to
decreipt/ to support these programs.
Change-Id: Ie99cd00ff8b0ab2675f2b1c821c3d664b9811f16
Reviewed-on: https://boringssl-review.googlesource.com/7360
Reviewed-by: David Benjamin <davidben@google.com>
node.js is, effectively, another bindings library. However, it's better
written than most and, with these changes, only a couple of tiny fixes
are needed in node.js. Some of these changes are a little depressing
however so we'll need to push node.js to use APIs where possible.
Changes:
∙ Support verify_recover. This is very obscure and the motivation
appears to be https://github.com/nodejs/node/issues/477 – where it's
not clear that anyone understands what it means :(
∙ Add a few, no-op #defines
∙ Add some members to |SSL_CTX| and |SSL| – node.js needs to not
reach into these structs in the future.
∙ Add EC_get_builtin_curves.
∙ Add EVP_[CIPHER|MD]_do_all_sorted – these functions are limited to
decrepit.
Change-Id: I9a3566054260d6c4db9d430beb7c46cc970a9d46
Reviewed-on: https://boringssl-review.googlesource.com/6952
Reviewed-by: Adam Langley <agl@google.com>
It seems OS X actually cares about symbol resolution and dependencies
when you create a dylib. Probably because they do two-level name
resolution.
(Obligatory disclaimer: BoringSSL does not have a stable ABI and is thus
not suitable for a traditional system-wide library.)
BUG=539603
Change-Id: Ic26c4ad23840fe6c1f4825c44671e74dd2e33870
Reviewed-on: https://boringssl-review.googlesource.com/6131
Reviewed-by: Adam Langley <alangley@gmail.com>
The callback arguments are required to be NULL.
Change-Id: I266ec46efdaca411a7f0c2b645883b2c5bec1c96
Reviewed-on: https://boringssl-review.googlesource.com/5160
Reviewed-by: Adam Langley <agl@google.com>
decrepit will contain algorithms that we really wish didn't exist any
longer. It won't be built by default in Chromium etc, but the code
will exist for crummy code that still needs it.
Change-Id: Ic307f5f0a69efe9e0a5fd54052f49d219e90dcdd
