Fastradio was a trick where the ClientHello was padding to at least 1024
bytes in order to trick some mobile radios into entering high-power mode
immediately. After experimentation, the feature is being dropped.
This change also tidies up a bit of the extensions code now that
everything is using the new system.
Change-Id: Icf7892e0ac1fbe5d66a5d7b405ec455c6850a41c
Reviewed-on: https://boringssl-review.googlesource.com/5466
Reviewed-by: Adam Langley <agl@google.com>
The NULL checks later on notice, but failing with
SSL_R_UNABLE_TO_FIND_PUBLIC_KEY_PARAMETERS on accident is confusing.
Require that the message be non-empty.
Change-Id: Iddfac6a3ae6e6dc66c3de41d3bb26e133c0c6e1d
Reviewed-on: https://boringssl-review.googlesource.com/5046
Reviewed-by: Adam Langley <agl@google.com>
Since we hope to eventually lose server-side renegotiation support
altogether, get the client-side version of those tests. We should have
had those anyway to test that the default is to allow it.
BUG=429450
Change-Id: I4a18f339b55f3f07d77e22e823141e10a12bc9ff
Reviewed-on: https://boringssl-review.googlesource.com/4780
Reviewed-by: Adam Langley <agl@google.com>
This cuts down on one config knob as well as one case in the renego
combinatorial explosion. Since the only case we care about with renego
is the client auth hack, there's no reason to ever do resumption.
Especially since, no matter what's in the session cache:
- OpenSSL will only ever offer the session it just established,
whether or not a newer one with client auth was since established.
- Chrome will never cache sessions created on a renegotiation, so
such a session would never make it to the session cache.
- The new_session + SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION
logic had a bug where it would unconditionally never offer tickets
(but would advertise support) on renego, so any server doing renego
resumption against an OpenSSL-derived client must not support
session tickets.
This also gets rid of s->new_session which is now pointless.
BUG=429450
Change-Id: I884bdcdc80bff45935b2c429b4bbc9c16b2288f8
Reviewed-on: https://boringssl-review.googlesource.com/4732
Reviewed-by: Adam Langley <agl@google.com>
Because RFC 6066 is obnoxious like that and IIS servers actually do this
when OCSP-stapling is configured, but the OCSP server cannot be reached.
BUG=478947
Change-Id: I3d34c1497e0b6b02d706278dcea5ceb684ff60ae
Reviewed-on: https://boringssl-review.googlesource.com/4461
Reviewed-by: Adam Langley <agl@google.com>
After sharding the session cache for fallbacks, the numbers have been pretty
good; 0.03% on dev and 0.02% on canary. Stable is at 0.06% but does not have
the sharded session cache. Before sharding, stable, beta, and dev had been
fairly closely aligned. Between 0.03% being low and the fallback saving us in
all but extremely contrived cases, I think this should be fairly safe.
Add tests for both the cipher suite and protocol version mismatch checks.
BUG=441456
Change-Id: I2374bf64d0aee0119f293d207d45319c274d89ab
Reviewed-on: https://boringssl-review.googlesource.com/3972
Reviewed-by: Adam Langley <agl@google.com>
Extend the False Start tests to optionally send an alert (thus avoiding
deadlock) before waiting for the out-of-order app data. Based on whether the
peer shuts off the connection before or after sending app data, we can
determine whether the peer False Started by observing purely external effects.
Change-Id: I8b9fecc29668e0b0c34b5fd19d0f239545011bae
Reviewed-on: https://boringssl-review.googlesource.com/4213
Reviewed-by: Adam Langley <agl@google.com>
That's a pretty obvious thing to test. I'm not sure how we forgot that one.
Change-Id: I7e1a7df6c6abbdd587e0f7723117f50d09faa5c4
Reviewed-on: https://boringssl-review.googlesource.com/4211
Reviewed-by: Adam Langley <agl@google.com>
Both on the client and the server.
Change-Id: I9892c6dbbb29938154aba4f53b10e8b5231f9c47
Reviewed-on: https://boringssl-review.googlesource.com/4071
Reviewed-by: Adam Langley <agl@google.com>
In verifying the fix for CVE-2015-0291, I noticed we don't actually have any
test coverage for full handshakes on renegotiation. All our tests always do
resumptions.
Change-Id: Ia9b701e8a50ba9353fefb8cc4fb86e78065d0b40
Reviewed-on: https://boringssl-review.googlesource.com/4050
Reviewed-by: Adam Langley <agl@google.com>
This mostly[*] doesn't matter for TLS since the message would have been
rejected anyway, but, in DTLS, if the peer rejects our Finished, it will send
an encrypted alert. This will then cause it to hang, which isn't very helpful.
I've made the change on both TLS and DTLS so the two protocols don't diverge on
this point. It is true that we're accepting nominally encrypted and
authenticated alerts before Finished, but, prior to ChangeCipherSpec, the
alerts are sent in the clear anyway so an attacker could already inject alerts.
A consumer could only be sensitive to it being post-CCS if it was watching
msg_callback. The only non-debug consumer of msg_callback I've found anywhere
is some hostapd code to detect Heartbeat.
See https://code.google.com/p/webrtc/issues/detail?id=4403 for an instance
where the equivalent behavior in OpenSSL masks an alert.
[*] This does change behavior slightly if the peer sends a warning alert
between CCS and Finished. I believe this is benign as warning alerts are
usually ignored apart from info_callback and msg_callback. The one exception is
a close_notify which is a slightly new state (accepting close_notify during a
handshake seems questionable...), but they're processed pre-CCS too.
Change-Id: Idd0d49b9f9aa9d35374a9f5e2f815cdb931f5254
Reviewed-on: https://boringssl-review.googlesource.com/3883
Reviewed-by: Adam Langley <agl@google.com>
We actually don't really care about this special-case since we only test client
full handshakes where the runner sends the second Finished not the shim
(otherwise the overlap logic and retransmitting on every fragment would
probably break us), but it should probably live next to the fragmentation
logic.
Change-Id: I54097d84ad8294bc6c42a84d6f22f496e63eb2a8
Reviewed-on: https://boringssl-review.googlesource.com/3763
Reviewed-by: Adam Langley <agl@google.com>
That might be a reasonable check to make, maybe.
DTLS handshake message reading has a ton of other bugs and needs a complete
rewrite. But let's fix this and get a test in now.
Change-Id: I4981fc302feb9125908bb6161ed1a18288c39e2b
Reviewed-on: https://boringssl-review.googlesource.com/3600
Reviewed-by: Adam Langley <agl@google.com>
This is consistent with ignoring writeRecord failures. Without doing this, the
DTLS MinimumVersion test now flakily fails with:
FAILED (MinimumVersion-Client-TLS12-TLS1-DTLS)
bad error (wanted ':UNSUPPORTED_PROTOCOL:' / 'remote error: protocol version not supported'): local error 'write unix @: broken pipe', child error 'exit status 2', stdout:
2092242157:error:1007b1a7:SSL routines:ssl3_get_server_hello:UNSUPPORTED_PROTOCOL:../ssl/s3_clnt.c:783:
This is because the MinimumVersion tests assert on /both/ expectedError and
expectedLocalError. The latter is valuable as it asserts on the alert the peer
returned. (I would like us to add more such assertions to our tests where
appropriate.) However, after we send ServerHello, we also send a few messages
following it. This races with the peer shutdown and we sometimes get EPIPE
before reading the alert.
Change-Id: I3fe37940a6a531379673a00976035f8e76e0f825
Reviewed-on: https://boringssl-review.googlesource.com/3337
Reviewed-by: Adam Langley <agl@google.com>
This works fine, but I believe NSS had a bug here a couple years ago. Also move
all the Skip* bug options next to each other in order.
Change-Id: I72dcb3babeee7ba73b3d7dc5ebef2e2298e37438
Reviewed-on: https://boringssl-review.googlesource.com/3333
Reviewed-by: Adam Langley <agl@google.com>
For now, only test reorderings when we always or never fragment messages.
There's a third untested case: when full messages and fragments are mixed. That
will be tested later after making it actually work.
Change-Id: Ic4efb3f5e87b1319baf2d4af31eafa40f6a50fa6
Reviewed-on: https://boringssl-review.googlesource.com/3216
Reviewed-by: Adam Langley <agl@google.com>
This extends the packet adaptor protocol to send three commands:
type command =
| Packet of []byte
| Timeout of time.Duration
| TimeoutAck
When the shim processes a Timeout in BIO_read, it sends TimeoutAck, fails the
BIO_read, returns out of the SSL stack, advances the clock, calls
DTLSv1_handle_timeout, and continues.
If the Go side sends Timeout right between sending handshake flight N and
reading flight N+1, the shim won't read the Timeout until it has sent flight
N+1 (it only processes packet commands in BIO_read), so the TimeoutAck comes
after N+1. Go then drops all packets before the TimeoutAck, thus dropping one
transmit of flight N+1 without having to actually process the packets to
determine the end of the flight. The shim then sees the updated clock, calls
DTLSv1_handle_timeout, and re-sends flight N+1 for Go to process for real.
When dropping packets, Go checks the epoch and increments sequence numbers so
that we can continue to be strict here. This requires tracking the initial
sequence number of the next epoch.
The final Finished message takes an additional special-case to test. DTLS
triggers retransmits on either a timeout or seeing a stale flight. OpenSSL only
implements the former which should be sufficient (and is necessary) EXCEPT for
the final Finished message. If the peer's final Finished message is lost, it
won't be waiting for a message from us, so it won't time out anything. That
retransmit must be triggered on stale message, so we retransmit the Finished
message in Go.
Change-Id: I3ffbdb1de525beb2ee831b304670a3387877634c
Reviewed-on: https://boringssl-review.googlesource.com/3212
Reviewed-by: Adam Langley <agl@google.com>
This is fatal for TLS but buffered in DTLS. The buffering isn't strictly
necessary (it would be just as valid to drop the record on the floor), but so
long as we want this behavior it should have a test.
Change-Id: I5846bb2fe80d78e25b6dfad51bcfcff2dc427c3f
Reviewed-on: https://boringssl-review.googlesource.com/3029
Reviewed-by: Adam Langley <agl@google.com>
The ClientHello record is padded to 1024 bytes when
fastradio_padding is enabled. As a result, the 3G cellular radio
is fast forwarded to DCH (high data rate) state. This mechanism
leads to a substantial redunction in terms of TLS handshake
latency, and benefits mobile apps that are running on top of TLS.
Change-Id: I3d55197b6d601761c94c0f22871774b5a3dad614
We forgot to add those when we implemented the features. (Also relevant because
they will provide test coverage later for configuring features when using the
generic method tables rather than *_client_method.)
Change-Id: Ie08b27de893095e01a05a7084775676616459807
Reviewed-on: https://boringssl-review.googlesource.com/2410
Reviewed-by: Adam Langley <agl@google.com>
This implements session IDs in client and server in runner.go.
Change-Id: I26655f996b7b44c7eb56340ef6a415d3f2ac3503
Reviewed-on: https://boringssl-review.googlesource.com/2350
Reviewed-by: Adam Langley <agl@google.com>
Just the negotiation portion as everything else is external. This feature is
used in WebRTC.
Change-Id: Iccc3983ea99e7d054b59010182f9a56a8099e116
Reviewed-on: https://boringssl-review.googlesource.com/2310
Reviewed-by: Adam Langley <agl@google.com>
Clients all consistently reject mismatches. If a different version was
negotiated, a server should ignore the resumption. This doesn't actually affect
current tests. We really want to be making this change in BoringSSL (and then
upstream), but get the Go half into shape first.
Change-Id: Ieee7e141331d9e08573592e661889bd756dccfa9
Reviewed-on: https://boringssl-review.googlesource.com/2243
Reviewed-by: Adam Langley <agl@google.com>
This change adds support to the Go code for renegotiation as a client,
meaning that we can test BoringSSL's renegotiation as a server.
Change-Id: Iaa9fb1a6022c51023bce36c47d4ef7abee74344b
Reviewed-on: https://boringssl-review.googlesource.com/2082
Reviewed-by: Adam Langley <agl@google.com>
Only the three plain PSK suites for now. ECDHE_PSK_WITH_AES_128_GCM_SHA256 will
be in a follow-up.
Change-Id: Iafc116a5b2798c61d90c139b461cf98897ae23b3
Reviewed-on: https://boringssl-review.googlesource.com/2051
Reviewed-by: Adam Langley <agl@google.com>
Notably, this would have caught ed8270a55c
(although, apart from staring at code coverage, knowing to set resumeSession on
the server test isn't exactly obvious). Perhaps we should systematically set it
on all extension server tests; ClientHello extension parsing happens after
resumption has been determined and is often sensitive to it.
Change-Id: Ie83f294a26881a6a41969e9dbd102d0a93cb68b5
Reviewed-on: https://boringssl-review.googlesource.com/1750
Reviewed-by: Adam Langley <agl@google.com>
This check got refactored in OpenSSL 1.0.2 and broke in the process. Fix this
and add a test. Otherwise things like client auth can get slightly confused; it
will try to sign the MD5/SHA-1 hash, but the TLS 1.2 cipher suite may not use
SSL_HANDSHAKE_MAC_DEFAULT, so those digests won't be available.
Based on upstream's 226751ae4a.
Change-Id: I5b864d3a696f3187b849c53b872c24fb7df27924
Reviewed-on: https://boringssl-review.googlesource.com/1696
Reviewed-by: Adam Langley <agl@google.com>
Maintain a handshake buffer in prf.go to implement TLS 1.2 client auth. Also
use it for SSL 3. This isn't strictly necessary as we know the hash functions,
but Go's hash.Hash interface lacks a Copy method.
Also fix the server-side tests which failed to test every TLS version.
Change-Id: I98492c334fbb9f2f0f89ee9c5c8345cafc025600
Reviewed-on: https://boringssl-review.googlesource.com/1664
Reviewed-by: Adam Langley <agl@google.com>
RFC 6347 changed the meaning of server_version in HelloVerifyRequest. It should
now always be 1.0 with version negotiation not happening until ServerHello. Fix
runner.go logic and remove #if-0'd code in dtls1_get_hello_verify.
Enforce this in the runner for when we get DTLS 1.2 tests.
Change-Id: Ice83628798a231df6bf268f66b4c47b14a519386
Reviewed-on: https://boringssl-review.googlesource.com/1552
Reviewed-by: Adam Langley <agl@google.com>
Rather than switching the order of the ServerHello and HelloVerifyRequest
states and processing each twice, have the states follow the protocol order.
HelloVerifyRequest reading is optional and ServerHello is strict. Use the
send_cookie bit to determine whether we're expecting a cookie or not.
Fix the dtls1_stop_timer call in these states to consistently hit the end of a
server flight; the previous flight should not be cleared from the retransmit
buffer until the entire next flight is received. That said, OpenSSL doesn't
appear to implement the part where, on receipt of the previous peer flight, the
buffered flight is retransmitted. (With the exception of a SSL3_MT_FINISHED
special-case in dtls1_read_bytes.) So if the peer is also OpenSSL, this doesn't
do anything.
Also fix the DTLS test which wasn't actually asserting that the ClientHello
matched.
Change-Id: Ia542190972dbffabb837d32c9d453a243caa90b2
Reviewed-on: https://boringssl-review.googlesource.com/1551
Reviewed-by: Adam Langley <agl@google.com>
Run against openssl s_client and openssl s_server. This seems to work for a
start, although it may need to become cleverer to stress more of BoringSSL's
implementation for test purposes.
In particular, it assumes a reliable, in-order channel. And it requires that
the peer send handshake fragments in order. Retransmit and whatnot are not
implemented. The peer under test will be expected to handle a lossy channel,
but all loss in the channel will be controlled. MAC errors, etc., are fatal.
Change-Id: I329233cfb0994938fd012667ddf7c6a791ac7164
Reviewed-on: https://boringssl-review.googlesource.com/1390
Reviewed-by: Adam Langley <agl@google.com>
Didn't have coverage for abbreviated handshakes with NewSessionTicket. Also add
some missing resumeSession flags so the tests match the comments.
Change-Id: Ie4d76e8764561f3f1f31e1aa9595324affce0db8
Reviewed-on: https://boringssl-review.googlesource.com/1453
Reviewed-by: Adam Langley <agl@google.com>
Now that the flag is set accurately, use it to enforce that the handshake and
CCS synchronization. If EXPECT_CCS is set, enforce that:
(a) No handshake records may be received before ChangeCipherSpec.
(b) There is no pending handshake data at the point EXPECT_CCS is set.
Change-Id: I04b228fe6a7a771cf6600b7d38aa762b2d553f08
Reviewed-on: https://boringssl-review.googlesource.com/1299
Reviewed-by: Adam Langley <agl@google.com>
Adam Langley
David Benjamin
Adam Langley
Feng Lu