Valgrind's checking of uninitialised memory behaves very much like a
check for constant-time code: branches and memory indexes based on
uninitialised memory trigger warnings. Therefore, if we can tell
Valgrind that some secret is “uninitialised”, it'll give us a warning if
we do something non-constant-time with it.
This was the idea behind https://github.com/agl/ctgrind. But tricks like
that are no longer needed because Valgrind now comes with support for
marking regions of memory as defined or not. Therefore we can use that
API to check constant-time code.
This CL defines |CONSTTIME_SECRET| and |CONSTTIME_DECLASSIFY|, which are
no-ops unless the code is built with
|BORINGSSL_CONSTANT_TIME_VALIDATION| defined, which it isn't by default.
So this CL is a no-op itself so far. But it does show that a couple of
bits of constant-time time are, in fact, constant-time—seemingly even
when compiled with optimisations, which is nice.
The annotations in the RSA code are a) probably not marking all the
secrets as secret, and b) triggers warnings that are a little
interesting:
The anti-glitch check calls |BN_mod_exp_mont| which checks that the
input is less than the modulus. Of course, it is because the input is
the RSA plaintext that we just decrypted, but the plaintext is supposed
to be secret and so branching based on its contents isn't allows by
Valgrind. The answer isn't totally clear, but I've run out of time on
this for now.
Change-Id: I1608ed0b22d201e97595fafe46127159e02d5b1b
Reviewed-on: https://boringssl-review.googlesource.com/c/33504
Reviewed-by: Adam Langley <agl@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: Adam Langley <agl@google.com>
The function does not take ownership of |e| and this makes that clear.
Change-Id: I53bb5fa94bec5d16d1c904b59391d36df7abbde6
Reviewed-on: https://boringssl-review.googlesource.com/c/33164
Commit-Queue: Adam Langley <agl@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This often causes confusion since, for various silly reasons (intrinsic
ref-counting, FOO_METHOD, and RSA's cached Montgomery bits), the thread
safety of some functions don't match the usual const/non-const
distinction. Fix const-ness where easy and document it otherwise.
Change-Id: If2037a4874d7580cc79b18ee21f12ae0f47db7fd
Reviewed-on: https://boringssl-review.googlesource.com/31344
Reviewed-by: Ryan Sleevi <rsleevi@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Thanks to Brian Smith for pointing this out.
Change-Id: I27ae58df0028bc6aa3a11741acb5453369e202cc
Reviewed-on: https://boringssl-review.googlesource.com/28625
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
cryptography.io wants RSA_R_BLOCK_TYPE_IS_NOT_02, only used by the
ancient RSA_padding_check_SSLv23 function. Define it but never emit it.
Additionally, it's rather finicky about RSA_R_TOO_LARGE* errors. We
merged them in BoringSSL because having RSA_R_TOO_LARGE,
RSA_R_TOO_LARGE_FOR_MODULUS, and RSA_R_TOO_LARGE_FOR_KEY_SIZE is a
little silly. But since we don't expect well-behaved code to condition
on error codes anyway, perhaps that wasn't worth it. Split them back
up.
Looking through OpenSSL, there is a vague semantic difference:
RSA_R_DIGEST_TOO_BIG_FOR_RSA_KEY - Specifically emitted if a digest is
too big for PKCS#1 signing with this key.
RSA_R_DATA_TOO_LARGE_FOR_KEY_SIZE - You asked me to sign or encrypt a
digest/plaintext, but it's too big for this key.
RSA_R_DATA_TOO_LARGE_FOR_MODULUS - You gave me an RSA ciphertext or
signature and it is not fully reduced modulo N.
-OR-
The padding functions produced something that isn't reduced, but I
believe this is unreachable outside of RSA_NO_PADDING.
RSA_R_DATA_TOO_LARGE - Some low-level padding function was told to copy
a digest/plaintext into some buffer, but the buffer was too small. I
think this is basically unreachable.
-OR-
You asked me to verify a PSS signature, but I didn't need to bother
because the digest/salt parameters you picked were too big.
Update-Note: This depends on cl/196566462.
Change-Id: I2e539e075eff8bfcd52ccde365e975ebcee72567
Reviewed-on: https://boringssl-review.googlesource.com/28547
Reviewed-by: Adam Langley <agl@google.com>
The FIPS 186-4 algorithm we use includes a limit which hits a 2^-20
failure probability, assuming my math is right. We've observed roughly
2^-23. This is a little large at scale. (See b/77854769.)
To avoid modifying the FIPS algorithm, retry the whole thing four times
to bring the failure rate down to 2^-80. Along the way, now that I have
the derivation on hand, adjust
https://boringssl-review.googlesource.com/22584 to target the same
failure probability.
Along the way, fix an issue with RSA_generate_key where, if callers
don't check for failure, there may be half a key in there.
Change-Id: I0e1da98413ebd4ffa65fb74c67a58a0e0cd570ff
Reviewed-on: https://boringssl-review.googlesource.com/27288
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
https://boringssl-review.googlesource.com/10520 and then later
https://boringssl-review.googlesource.com/25285 made BN_MONT_CTX_set
constant-time, which is necessary for RSA's mont_p and mont_q. However,
due to a typo in the benchmark, they did not correctly measure.
Split BN_MONT_CTX creation into a constant-time and variable-time one.
The constant-time one uses our current algorithm and the latter restores
the original BN_mod codepath.
Should we wish to avoid BN_mod, I have an alternate version lying
around:
First, BN_set_bit + bn_mod_lshift1_consttime as now to count up to 2*R.
Next, observe that 2*R = BN_to_montgomery(2) and R*R =
BN_to_montgomery(R) = BN_to_montgomery(2^r_bits) Also observe that
BN_mod_mul_montgomery only needs n0, not RR. Split the core of
BN_mod_exp_mont into its own function so the caller handles conversion.
Raise 2*R to the r_bits power to get 2^r_bits*R = R*R.
The advantage of that algorithm is that it is still constant-time, so we
only need one BN_MONT_CTX_new. Additionally, it avoids BN_mod which is
otherwise (almost, but the remaining links should be easy to cut) out of
the critical path for correctness. One less operation to worry about.
The disadvantage is that it is gives a 25% (RSA-2048) or 32% (RSA-4096)
slower RSA verification speed. I went with the BN_mod one for the time
being.
Before:
Did 9204 RSA 2048 signing operations in 10052053us (915.6 ops/sec)
Did 326000 RSA 2048 verify (same key) operations in 10028823us (32506.3 ops/sec)
Did 50830 RSA 2048 verify (fresh key) operations in 10033794us (5065.9 ops/sec)
Did 1269 RSA 4096 signing operations in 10019204us (126.7 ops/sec)
Did 88435 RSA 4096 verify (same key) operations in 10031129us (8816.1 ops/sec)
Did 14552 RSA 4096 verify (fresh key) operations in 10053411us (1447.5 ops/sec)
After:
Did 9150 RSA 2048 signing operations in 10022831us (912.9 ops/sec)
Did 322000 RSA 2048 verify (same key) operations in 10028604us (32108.2 ops/sec)
Did 289000 RSA 2048 verify (fresh key) operations in 10017205us (28850.4 ops/sec)
Did 1270 RSA 4096 signing operations in 10072950us (126.1 ops/sec)
Did 87480 RSA 4096 verify (same key) operations in 10036328us (8716.3 ops/sec)
Did 80730 RSA 4096 verify (fresh key) operations in 10073614us (8014.0 ops/sec)
Change-Id: Ie8916d1634ccf8513ceda458fa302f09f3e93c07
Reviewed-on: https://boringssl-review.googlesource.com/27287
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
Our technique to perform the reduction only works for balanced key
sizes. For unbalanced keys, we fall back to variable-time logic.
Instead, fall back earlier to the non-CRT codepath, which is still
secure, just slower. This also aligns with the advice here:
https://github.com/HACS-workshop/spectre-mitigations/blob/master/crypto_guidelines.md#1-do-not-conditionally-choose-between-constant-and-non-constant-time
Update-Note: This is a performance hit (some keys will run 3x slower),
but only for keys with different-sized primes. I believe the Windows
crypto APIs will not accept such keys at all. There are two scenarios to
be concerned with for RSA performance:
1. Performance of reasonably-generated keys. Keys that BoringSSL or
anyone else reasonable generates will all be balanced, so this change
does not affect them.
2. Worst-case performance for DoS purposes. This CL does not change the
worst-case performance for RSA at a given bit size. In fact, it improves
it slightly. A sufficiently unbalanced RSA key is as slow as not doing
CRT at all.
In both cases, this change does not affect performance. The affected
keys are pathologically-generated ones that were not quite pathological
enough.
Bug: 235
Change-Id: Ie298dabb549ab9108fa9374aa86ebffe8b6c6c88
Reviewed-on: https://boringssl-review.googlesource.com/27504
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Windows CryptoAPI and Go bound public exponents at 2^32-1, so don't
generate keys which would violate that.
https://github.com/golang/go/issues/3161https://msdn.microsoft.com/en-us/library/aa387685(VS.85).aspx
BoringSSL itself also enforces a 33-bit limit.
I don't currently have plans to take much advantage of it, but the
modular inverse step and one of the GCDs in RSA key generation are
helped by small public exponents[0]. In case someone feels inspired
later, get this limit enforced now. Use 32-bits as that's a more
convenient limit, and there's no requirement to produce e=2^32+1 keys.
(Is there still a requirement to accept them?)
[0] This isn't too bad, but it's only worth it if it produces simpler or
smaller code. RSA keygen is not performance-critical.
1. Make bn_mod_u16_consttime work for uint32_t. It only barely doesn't
work. Maybe only accept 3 and 65537 and pre-compute, maybe call into
bn_div_rem_words and friends, maybe just tighten the bound a hair
longer.
2. Implement bn_div_u32_consttime by incorporating 32-bit chunks much
like bn_mod_u32_consttime.
3. Perform one normal Euclidean algorithm iteration rather than using the
binary version. u, v, B, and D are now single words, while A and C
are full-width.
4. Continue with binary Euclidean algorithm (u and v are still secret),
taking advantage of most values being small.
Update-Note: RSA_generate_key_ex will no longer generate keys with
public exponents larger than 2^32-1. Everyone uses 65537, save some
folks who use 3, so this shouldn't matter.
Change-Id: I0d28a29a30d9ff73bff282e34dd98e2b64c35c79
Reviewed-on: https://boringssl-review.googlesource.com/26365
Reviewed-by: Adam Langley <alangley@gmail.com>
We don't check it is fully reduced because different implementations use
Carmichael vs Euler totients, but if d exceeds n, something is wrong.
Note the fixed-width BIGNUM changes already fail operations with
oversized d.
Update-Note: Some blatantly invalid RSA private keys will be rejected at
RSA_check_key time. Note that most of those keys already are not
usable with BoringSSL anyway. This CL moves the failure from
sign/decrypt to RSA_check_key.
Change-Id: I468dbba74a148aa58c5994cc27f549e7ae1486a2
Reviewed-on: https://boringssl-review.googlesource.com/26374
Reviewed-by: Adam Langley <alangley@gmail.com>
Rather than recompute values the same as in key generation, where
possible, we check differently. In particular, most RSA values are
modular inverses of some value. Check each of them by multiplying and
using our naive constant-time division function.
Median of 29 RSA keygens: 0m0.218s -> 0m0.205s
(Accuracy beyond 0.1s is questionable.)
Bug: 238
Change-Id: Iaca19f12c045457013def844a17bf502ed09136e
Reviewed-on: https://boringssl-review.googlesource.com/26373
Reviewed-by: Adam Langley <alangley@gmail.com>
This leaves RSA_check_key, which will be fixed in subsequent commits.
Median of 29 RSA keygens: 0m0.220s -> 0m0.209s
(Accuracy beyond 0.1s is questionable.)
Bug: 238
Change-Id: I325f23fcc59302e68570908e5427b65471b799f6
Reviewed-on: https://boringssl-review.googlesource.com/26371
Reviewed-by: Adam Langley <alangley@gmail.com>
Expose the constant-time abs_sub functions from the fixed Karatsuba code
in BIGNUM form for RSA to call into. RSA key generation involves
checking if |p - q| is above some lower bound.
BN_sub internally branches on which of p or q is bigger. For any given
iteration, this is not secret---one of p or q is necessarily the larger,
and whether we happened to pick the larger or smaller first is
irrelevant. Accordingly, there is no need to perform the p/q swap at the
end in constant-time.
However, this stage of the algorithm picks p first, sticks with it, and
then computes |p - q| for various q candidates. The distribution of
comparisons leaks information about p. The leak is unlikely to be
problematic, but plug it anyway.
Median of 29 RSA keygens: 0m0.210s -> 0m0.212s
(Accuracy beyond 0.1s is questionable.)
Bug: 238
Change-Id: I024b4e51b364f5ca2bcb419a0393e7be13249aec
Reviewed-on: https://boringssl-review.googlesource.com/26368
Reviewed-by: Adam Langley <alangley@gmail.com>
It costs us a malloc, but it's one less function to test and implement
in constant time, now that BN_cmp and BIGNUM are okay.
Median of 29 RSA keygens: 0m0.207s -> 0m0.210s
(Accuracy beyond 0.1s is questionable.)
Bug: 238
Change-Id: Ic56f92f0dcf04da1f542290a7e8cdab8036699ed
Reviewed-on: https://boringssl-review.googlesource.com/26367
Reviewed-by: Adam Langley <alangley@gmail.com>
RSA key generation currently does the GCD check before the primality
test, in hopes of discarding things invalid by other means before
running the expensive primality check.
However, GCD is about to get a bit more expensive to clear the timing
leak, and the trial division part of primality testing is quite fast.
Thus, split that portion out via a new bn_is_obviously_composite and
call it before GCD.
Median of 29 RSA keygens: 0m0.252s -> 0m0.207s
(Accuracy beyond 0.1s is questionable.)
Bug: 238
Change-Id: I3999771fb73cca16797cab9332d14c4ebeb02046
Reviewed-on: https://boringssl-review.googlesource.com/26366
Reviewed-by: Adam Langley <alangley@gmail.com>
I'm not sure why I separated "fixed" and "quick_ctx" names. That's
annoying and doesn't generalize well to, say, adding a bn_div_consttime
function for RSA keygen.
Change-Id: I751d52b30e079de2f0d37a952de380fbf2c1e6b7
Reviewed-on: https://boringssl-review.googlesource.com/26364
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
The probability of stumbling on a non-invertible b->A is negligible;
it's equivalent to accidentally factoring the RSA key. Relatedly,
document the slight caveat in BN_mod_inverse_blinded.
Change-Id: I308d17d12f5d6a12c444dda8c8fcc175ef2f5d45
Reviewed-on: https://boringssl-review.googlesource.com/26344
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
It's doable, but a bit of effort due to the different radix.
Change-Id: Ibfa15c31bb37de930f155ee6d19551a2b6437073
Reviewed-on: https://boringssl-review.googlesource.com/25944
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Reviewed-by: Steven Valdez <svaldez@google.com>
OpenSSL's RSA API is poorly designed and does not have a single place to
properly initialize the key. See
https://github.com/openssl/openssl/issues/5158.
To workaround this flaw, we must lazily instantiate pre-computed
Montgomery bits with locking. This is a ton of complexity. More
importantly, it makes it very difficult to implement RSA without side
channels. The correct in-memory representation of d, dmp1, and dmq1
depend on n, p, and q, respectively. (Those values have private
magnitudes and must be sized relative to the respective moduli.)
08805fe279 attempted to fix up the various
widths under lock, when we set up BN_MONT_CTX. However, this introduces
threading issues because other threads may access those exposed
components (RSA_get0_* also count as exposed for these purposes because
they are get0 functions), while a private key operation is in progress.
Instead, we do the following:
- There is no actual need to minimize n, p, and q, but we have minimized
copies in the BN_MONT_CTXs, so use those.
- Store additional copies of d, dmp1, and dmq1, at the cost of more
memory used. These copies have the correct width and are private,
unlike d, dmp1, and dmq1 which are sadly exposed. Fix private key
operations to use them.
- Move the frozen bit out of rsa->flags, as that too was historically
accessible without locking.
(Serialization still uses the original BIGNUMs, but the RSAPrivateKey
serialization format already inherently leaks the magnitude, so this
doesn't matter.)
Change-Id: Ia3a9b0629f8efef23abb30bfed110d247d1db42f
Reviewed-on: https://boringssl-review.googlesource.com/25824
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
This is a bit easier to read than BN_less_than_consttime when we must do
>= or <=, about as much work to compute, and lots of code calls BN_cmp
on secret data. This also, by extension, makes BN_cmp_word
constant-time.
BN_equal_consttime is probably a little more efficient and is perfectly
readable, so leave that one around.
Change-Id: Id2e07fe312f01cb6fd10a1306dcbf6397990cf13
Reviewed-on: https://boringssl-review.googlesource.com/25444
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
There is no more need for the "constant-time" reading beyond bn->top. We
can write the bytes out naively because RSA computations no longer call
bn_correct_top/bn_set_minimal_width.
Specifically, the final computation is a BN_mod_mul_montgomery to remove
the blinding, and that keeps the sizes correct.
Bug: 237
Change-Id: I6e90d81c323b644e179d899f411479ea16deab98
Reviewed-on: https://boringssl-review.googlesource.com/25324
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
Alas, the existence of RSA keys with q > p is obnoxious, but we can
canonicalize it away. To my knowledge, the remaining leaks in RSA are:
- Key generation. This is kind of hopelessly non-constant-time but
perhaps deserves a more careful ponder. Though hopefully it does not
come in at a measurable point for practical purposes.
- Private key serialization. RSAPrivateKey inherently leaks the
magnitudes of d, dmp1, dmq1, and iqmp. This is unavoidable but
hopefully does not come in at a measurable point for practical
purposes.
- If p and q have different word widths, we currently fall back to the
variable-time BN_mod rather than Montgomery reduction at the start of
CRT. I can think of ways to apply Montgomery reduction, but it's
probably better to deny CRT to such keys, if not reject them outright.
- bn_mul_fixed and bn_sqr_fixed which affect the Montgomery
multiplication bn_mul_mont-less configurations, as well as the final
CRT multiplication. We should fix this.
Bug: 233
Change-Id: I8c2ecf8f8ec104e9f26299b66ac8cbb0cad04616
Reviewed-on: https://boringssl-review.googlesource.com/25263
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
As the EC code will ultimately want to use these in "words" form by way
of EC_FELEM, and because it's much easier, I've implement these as
low-level words-based functions that require all inputs have the same
width. The BIGNUM versions which RSA and, for now, EC calls are
implemented on top of that.
Unfortunately, doing such things in constant-time and accounting for
undersized inputs requires some scratch space, and these functions don't
take BN_CTX. So I've added internal bn_mod_*_quick_ctx functions that
take a BN_CTX and the old functions now allocate a bit unnecessarily.
RSA only needs lshift (for BN_MONT_CTX) and sub (for CRT), but the
generic EC code wants add as well.
The generic EC code isn't even remotely constant-time, and I hope to
ultimately use stack-allocated EC_FELEMs, so I've made the actual
implementations here implemented in "words", which is much simpler
anyway due to not having to take care of widths.
I've also gone ahead and switched the EC code to these functions,
largely as a test of their performance (an earlier iteration made the EC
code noticeably slower). These operations are otherwise not
performance-critical in RSA.
The conversion from BIGNUM to BIGNUM+BN_CTX should be dropped by the
static linker already, and the unused BIGNUM+BN_CTX functions will fall
off when EC_FELEM happens.
Update-Note: BN_mod_*_quick bounce on malloc a bit now, but they're not
really used externally. The one caller I found was wpa_supplicant
which bounces on malloc already. They appear to be implementing
compressed coordinates by hand? We may be able to convince them to
call EC_POINT_set_compressed_coordinates_GFp.
Bug: 233, 236
Change-Id: I2bf361e9c089e0211b97d95523dbc06f1168e12b
Reviewed-on: https://boringssl-review.googlesource.com/25261
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
d, dmp1, dmq1, and iqmp have private magnitudes. This is awkward because
the RSAPrivateKey serialization leaks the magnitudes. Do the best we can
and fix them up before any RSA operations.
This moves the piecemeal BN_MONT_CTX_set_locked into a common function
where we can do more complex canonicalization on the keys. Ideally this
would be done on key import, but the exposed struct (and OpenSSL 1.1.0's
bad API design) mean there is no single point in time when key import is
finished.
Also document the constraints on RSA_set0_* functions. (These
constraints aren't new. They just were never documented before.)
Update-Note: If someone tried to use an invalid RSA key where d >= n,
dmp1 >= p, dmq1 >= q, or iqmp >= p, this may break. Such keys would not
have passed RSA_check_key, but it's possible to manually assemble
keys that bypass it.
Bug: 232
Change-Id: I421f883128952f892ac0cde0d224873a625f37c5
Reviewed-on: https://boringssl-review.googlesource.com/25259
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
This has no behavior change, but it has a semantic one. This CL is an
assertion that all BIGNUM functions tolerate non-minimal BIGNUMs now.
Specifically:
- Functions that do not touch top/width are assumed to not care.
- Functions that do touch top/width will be changed by this CL. These
should be checked in review that they tolerate non-minimal BIGNUMs.
Subsequent CLs will start adjusting the widths that BIGNUM functions
output, to fix timing leaks.
Bug: 232
Change-Id: I3a2b41b071f2174452f8d3801bce5c78947bb8f7
Reviewed-on: https://boringssl-review.googlesource.com/25257
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
Give a non-minimal modulus, there are two possible values of R we might
pick: 2^(BN_BITS2 * width) or 2^(BN_BITS2 * bn_minimal_width).
Potentially secret moduli would make the former attractive and things
might even work, but our only secret moduli (RSA) have public bit
widths. It's more cases to test and the usual BIGNUM invariant is that
widths do not affect numerical output.
Thus, settle on minimizing mont->N for now. With the top explicitly made
minimal, computing |lgBigR| is also a little simpler.
This CL also abstracts out the < R check in the RSA code, and implements
it in a width-agnostic way.
Bug: 232
Change-Id: I354643df30530db7866bb7820e34241d7614f3c2
Reviewed-on: https://boringssl-review.googlesource.com/25250
Reviewed-by: Adam Langley <agl@google.com>
This is actually a bit more complicated (the mismatching widths cases
will never actually happen in RSA), but it's easier to think about and
removes more width-sensitive logic.
Bug: 232
Change-Id: I85fe6e706be1f7d14ffaf587958e930f47f85b3c
Reviewed-on: https://boringssl-review.googlesource.com/25246
Reviewed-by: Adam Langley <agl@google.com>
RSA_METHOD_FLAG_NO_CHECK is the same as our RSA_FLAG_OPAQUE. cURL uses
this to determine if it should call SSL_CTX_check_private_key.
Change-Id: Ie2953632346a31de346a4452f4eaad8435cf76e8
Reviewed-on: https://boringssl-review.googlesource.com/24245
Reviewed-by: Adam Langley <agl@google.com>
Update-Note: Some RSA_FLAG_* constants are gone. Code search says they
were unused, but they can be easily restored if this breaks anything.
Change-Id: I47f642af5af9f8d80972ca8da0a0c2bd271c20eb
Reviewed-on: https://boringssl-review.googlesource.com/24244
Reviewed-by: Adam Langley <agl@google.com>
The first step of RSA with the CRT optimization is to reduce our input
modulo p and q. We can do this in constant-time[*] with Montgomery
reduction. When p and q are the same size, Montgomery reduction's bounds
hold. We need two rounds of it because the first round gives us an
unwanted R^-1.
This does not appear to have a measurable impact on performance. Also
add a long TODO describing how to make the rest of the function
constant-time[*] which hopefully we'll get to later. RSA blinding should
protect us from it all, but make this constant-time anyway.
Since this and the follow-up work will special-case weird keys, add a
test that we don't break those unintentionally. (Though I am not above
breaking them intentionally someday...)
Thanks to Andres Erbsen for discussions on how to do this bit properly.
[*] Ignoring the pervasive bn_correct_top problem for the moment.
Change-Id: Ide099a9db8249cb6549be99c5f8791a39692ea81
Reviewed-on: https://boringssl-review.googlesource.com/24204
Reviewed-by: Adam Langley <agl@google.com>
wpa_supplicant appear to be using these.
Change-Id: I1f220cae69162901bcd9452e8daf67379c5e276c
Reviewed-on: https://boringssl-review.googlesource.com/23324
Reviewed-by: Steven Valdez <svaldez@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This rewrites the internals with a "words" variant that can avoid
bn_correct_top. It still ultimately calls bn_correct_top as the calling
convention is sadly still BIGNUM, but we can lift that calling
convention out incrementally.
Performance seems to be comparable, if not faster.
Before:
Did 85000 ECDSA P-256 signing operations in 5030401us (16897.3 ops/sec)
Did 34278 ECDSA P-256 verify operations in 5048029us (6790.4 ops/sec)
After:
Did 85000 ECDSA P-256 signing operations in 5021057us (16928.7 ops/sec)
Did 34086 ECDSA P-256 verify operations in 5010416us (6803.0 ops/sec)
Change-Id: I1159746dfcc00726dc3f28396076a354556e6e7d
Reviewed-on: https://boringssl-review.googlesource.com/23065
Reviewed-by: Adam Langley <agl@google.com>
Generating a 2048-bit RSA key with e = 3 (don't do this), the failure
rate at 5*bits iterations appears to be around 7 failures in 1000 tries.
Bump the limit up to 32*bits. This should give a failure rate of around
2 failures in 10^14 tries.
(The FIPS 186-4 algorithm is meant for saner values of e, like 65537. e
= 3 implies a restrictive GCD requirement: the primes must both be 2 mod
3.)
Change-Id: Icd373f61e2eb90df5afaff9a0fc2b2fbb6ec3f0a
Reviewed-on: https://boringssl-review.googlesource.com/22584
Commit-Queue: David Benjamin <davidben@google.com>
Commit-Queue: Adam Langley <agl@google.com>
Reviewed-by: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Although we are derived from 1.0.2, we mimic 1.1.0 in some ways around
our FOO_up_ref functions and opaque libssl types. This causes some
difficulties when porting third-party code as any OPENSSL_VERSION_NUMBER
checks for 1.1.0 APIs we have will be wrong.
Moreover, adding accessors without changing OPENSSL_VERSION_NUMBER can
break external projects. It is common to implement a compatibility
version of an accessor under #ifdef as a static function. This then
conflicts with our headers if we, unlike OpenSSL 1.0.2, have this
function.
This change switches OPENSSL_VERSION_NUMBER to 1.1.0 and atomically adds
enough accessors for software with 1.1.0 support already. The hope is
this will unblock hiding SSL_CTX and SSL_SESSION, which will be
especially useful with C++-ficiation. The cost is we will hit some
growing pains as more 1.1.0 consumers enter the ecosystem and we
converge on the right set of APIs to import from upstream.
It does not remove any 1.0.2 APIs, so we will not require that all
projects support 1.1.0. The exception is APIs which changed in 1.1.0 but
did not change the function signature. Those are breaking changes.
Specifically:
- SSL_CTX_sess_set_get_cb is now const-correct.
- X509_get0_signature is now const-correct.
For C++ consumers only, this change temporarily includes an overload
hack for SSL_CTX_sess_set_get_cb that keeps the old callback working.
This is a workaround for Node not yet supporting OpenSSL 1.1.0.
The version number is set at (the as yet unreleased) 1.1.0g to denote
that this change includes https://github.com/openssl/openssl/pull/4384.
Bug: 91
Change-Id: I5eeb27448a6db4c25c244afac37f9604d9608a76
Reviewed-on: https://boringssl-review.googlesource.com/10340
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
crypto/{asn1,x509,x509v3,pem} were skipped as they are still OpenSSL
style.
Change-Id: I3cd9a60e1cb483a981aca325041f3fbce294247c
Reviewed-on: https://boringssl-review.googlesource.com/19504
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
There are still a ton of them, almost exclusively complaints that
function declaration and definitions have different parameter names. I
just fixed a few randomly.
Change-Id: I1072f3dba8f63372cda92425aa94f4aa9e3911fa
Reviewed-on: https://boringssl-review.googlesource.com/18706
Reviewed-by: Steven Valdez <svaldez@google.com>
We've got three versions of DATA_TOO_LARGE and two versions of
DATA_TOO_SMALL with no apparent distinction between them.
Change-Id: I18ca2cb71ffc31b04c8fd0be316c362da4d7daf9
Reviewed-on: https://boringssl-review.googlesource.com/17529
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Public and private RSA keys have the same type in OpenSSL, so it's
probably prudent for us to catch this case with an error rather than
crash. (As we do if you, say, configure RSA-PSS parameters on an Ed25519
EVP_PKEY.) Bindings libraries, in particular, tend to hit this sort of
then when their callers do silly things.
Change-Id: I2555e9bfe716a9f15273abd887a8459c682432dd
Reviewed-on: https://boringssl-review.googlesource.com/17325
Commit-Queue: Adam Langley <agl@google.com>
Reviewed-by: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This change allows blinding to be disabled without also having to remove
|e|, which would disable the CRT and the glitch checks. This is to
support disabling blinding in the FIPS power-on tests.
(Note: the case where |e| isn't set is tested by RSATest.OnlyDGiven.)
Change-Id: I28f18beda33b1687bf145f4cbdfd37ce262dd70f
Reviewed-on: https://boringssl-review.googlesource.com/17146
Commit-Queue: Adam Langley <alangley@gmail.com>
Commit-Queue: Adam Langley <agl@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Reviewed-by: Adam Langley <agl@google.com>
The only place it is used is EC_KEY_{dup,copy} and no one calls that
function on an EC_KEY with ex_data. This aligns with functions like
RSAPublicKey_dup which do not copy ex_data. The logic is also somewhat
subtle in the face of malloc errors (upstream's PR 3323).
In fact, we'd even changed the function pointer signature from upstream,
so BoringSSL-only code is needed to pass this pointer in anyway. (I
haven't switched it to CRYPTO_EX_unused because there are some callers
which pass in an implementation anyway.)
Note, in upstream, the dup hook is also used for SSL_SESSIONs when those
are duplicated (for TLS 1.2 ticket renewal or TLS 1.3 resumption). Our
interpretation is that callers should treat those SSL_SESSIONs
equivalently to newly-established ones. This avoids every consumer
providing a dup hook and simplifies the interface.
(I've gone ahead and removed the TODO(fork). I don't think we'll be able
to change this API. Maybe introduce a new one, but it may not be worth
it? Then again, this API is atrocious... I've never seen anyone use argl
and argp even.)
BUG=21
Change-Id: I6c9e9d5a02347cb229d4c084c1e85125bd741d2b
Reviewed-on: https://boringssl-review.googlesource.com/16344
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This has since been done.
Change-Id: I498f845fa4ba3d1c04a5892831be4b07f31536d4
Reviewed-on: https://boringssl-review.googlesource.com/16124
Commit-Queue: David Benjamin <davidben@google.com>
Commit-Queue: Steven Valdez <svaldez@google.com>
Reviewed-by: Steven Valdez <svaldez@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
