The distinction for full handshakes is not meaningful (the timestamp is
currently the start of the handshake), but for renewed sessions, we
currently retain the timestamp of the original issuance.
Instead, when minting or receiving tickets, adjust session->time and
session->timeout so that session->time is the ticket issuance time.
This is still not our final TLS 1.3 behavior (which will need a both
renewable and non-renewable times to honor the server ticket lifetime),
but it gets us closer and unblocks handling ticket_age_add from TLS 1.3
draft 18 and sends the correct NewSessionTicket lifetime.
This fixes the ticket lifetime hint which we emit on the server to
mirror the true ticket lifetime. It also fixes the TLS 1.3 server code
to not set the ticket lifetime hint. There is no need to waste ticket
size with it, it is no longer a "hint" in TLS 1.3, and even in the TLS
1.3 code we didn't fill it in on the server.
Change-Id: I140541f1005a24e53e1b1eaa90996d6dada1c3a1
Reviewed-on: https://boringssl-review.googlesource.com/12105
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
TLS 1.3 clarifies that a ticket lifetime of zero means the session is
unusable. We don't currently pay attention to that field (to be fixed in
later changes) but, in preparation for this, switch the >= to a >.
Change-Id: I0e67a0d97bc8def04914f121e84d3e7a2d640d2c
Reviewed-on: https://boringssl-review.googlesource.com/12102
Commit-Queue: David Benjamin <davidben@google.com>
Reviewed-by: Adam Langley <agl@google.com>
A renewed session does not refresh the timeout. Add tests for this in
preparation for future changes which will revise this logic.
Specifically, TLS 1.3 draft 18's ticket_age_add logic will require some
tweaks in lifetime tracking to record when the ticket was minted. We'll
also likely wish to tweak the parameters for 1.3 to account for (a)
ECDHE-PSK means we're only worried about expiring a short-circuited
authentication rather than forward secrecy and (b) two hours is too
short for a QUIC 0-RTT replacement.
Change-Id: I0f1edd09151e7fcb5aee2742ef8600fbd7080df6
Reviewed-on: https://boringssl-review.googlesource.com/12002
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
TLS 1.3 ciphers are now always enabled and come with a hard-coded
preference order.
BUG=110
Change-Id: Idd9cb0d75fb6bf2676ecdee27d88893ff974c4a3
Reviewed-on: https://boringssl-review.googlesource.com/12025
Reviewed-by: Adam Langley <agl@google.com>
HTTP/2 requires TLS 1.2 so the negotiated version should be available
during the ALPN callback.
Change-Id: Iea332808b531a6e5c917de5b8c8917c0aa7428a1
Reviewed-on: https://boringssl-review.googlesource.com/12060
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
HTTP/2 places requirements on the cipher suite. So that servers can
decline HTTP/2 when these requirements aren't met, defer ALPN
negotiation.
See also b/32553041.
Change-Id: Idbcf049f9c8bda06a8be52a0154fe76e84607268
Reviewed-on: https://boringssl-review.googlesource.com/11982
Reviewed-by: Adam Langley <agl@google.com>
We were only testing one side.
Change-Id: Ieb755e27b235aaf1317bd2c8e5fb374cb0ecfdb3
Reviewed-on: https://boringssl-review.googlesource.com/12001
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
This shouldn't happen, but it is good to check to avoid the potential
underflow in ssl_session_is_time_valid.
This required tweaking the mock clock in bssl_shim to stop going back in
time.
Change-Id: Id3ab8755139e989190d0b53d4bf90fe1ac203022
Reviewed-on: https://boringssl-review.googlesource.com/11841
Reviewed-by: David Benjamin <davidben@google.com>
We currently preferentially sign the largest hash available and
advertise such a preference for signatures we accept. We're just as
happy with SHA-256 and, all else equal, a smaller hash would be epsilon
more performant. We also currently claim, in TLS 1.3, we prefer P-384
over P-256 which is off.
Instead order SHA-256 first, next the larger SHA-2 hashes, and leave
SHA-1 at the bottom. Within a hash, order ECDSA > RSA-PSS > RSA-PKCS1.
This has the added consequence that we will preferentially pair P-256
with SHA-256 in signatures we generate instead of larger hashes that get
truncated anyway.
Change-Id: If4aee068ba6829e8c0ef7948f56e67a5213e4c50
Reviewed-on: https://boringssl-review.googlesource.com/11821
Reviewed-by: Adam Langley <agl@google.com>
{sha1, ecdsa} is virtually nonexistent. {sha512, ecdsa} is pointless
when we only accept P-256 and P-384. See Chromium Intent thread here:
https://groups.google.com/a/chromium.org/d/msg/blink-dev/kWwLfeIQIBM/9chGZ40TCQAJ
This tweaks the signature algorithm logic slightly so that sign and
verify preferences are separate.
BUG=chromium:655318
Change-Id: I1097332600dcaa38e62e4dffa0194fb734c6df3f
Reviewed-on: https://boringssl-review.googlesource.com/11621
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
There were some logic errors that were revealed by testing at TLS 1.3.
Also explicitly test GetClientHelloLen at TLS 1.2 (rather than relying
on the default) since the TLS 1.3 ClientHello is too large.
Change-Id: I907cb6ac04b40f845e99593bad06739132ca56b2
Reviewed-on: https://boringssl-review.googlesource.com/11605
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Change-Id: Ib499b3393962a4d41cf9694e055ed3eb869d91a2
Reviewed-on: https://boringssl-review.googlesource.com/11504
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
BUG=77
Change-Id: If568412655aae240b072c29d763a5b17bb5ca3f7
Reviewed-on: https://boringssl-review.googlesource.com/10840
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Commit-Queue: David Benjamin <davidben@google.com>
Breaking from inside the inner loop doesn't do what the code wants.
Instead the outer loop will continue running and it's possible for it to
read off the end of the buffer. (Found with libFuzzer.)
Next change will update the other abort points in this code to match.
Change-Id: I006dca0cd4c31db1c4b5e84b996fe24b2f1e6c13
Reviewed-on: https://boringssl-review.googlesource.com/11421
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This function is used by NGINX to enable specific curves for ECDH from a
configuration file. However when building with BoringSSL, since it's not
implmeneted, it falls back to using EC_KEY_new_by_curve_name() wich doesn't
support X25519.
Change-Id: I533df4ef302592c1a9f9fc8880bd85f796ce0ef3
Reviewed-on: https://boringssl-review.googlesource.com/11382
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
We were never really testing this.
Change-Id: Ia953870053d16d3994ae48172017d384c7bc3601
Reviewed-on: https://boringssl-review.googlesource.com/11341
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Upstream makes 0 mean "min/max supported version". Match that behavior,
although call it "default" instead. It shouldn't get you TLS 1.3 until
we're ready to turn it on everywhere.
BUG=90
Change-Id: I9f122fceb701b7d4de2ff70afbc1ffdf370cb97e
Reviewed-on: https://boringssl-review.googlesource.com/11181
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
The old numbers violate a MUST-level requirement in TLS 1.2 to not
advertise anonymous (0x0700 ends in 0x00). The spec has been updated
with new allocations which avoid these.
BUG=webrtc:6342
Change-Id: Ia5663ada98fa1ebf0f8a7f50fe74a0e9206c4194
Reviewed-on: https://boringssl-review.googlesource.com/11131
Reviewed-by: Adam Langley <agl@google.com>
Upstream added these functions after we did but decided to change the
names slightly. I'm not sure why they wanted to add the "proto" in
there, but align with them nonetheless so the ecosystem only has one set
of these functions.
BUG=90
Change-Id: Ia9863c58c9734374092051f02952b112806040cc
Reviewed-on: https://boringssl-review.googlesource.com/11123
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This is in preparation for using the supported_versions extension to
experiment with draft TLS 1.3 versions, since we don't wish to restore
the fallback. With versions begin opaque values, we will want
version_from_wire to reject unknown values, not attempt to preserve
order in some way.
This means ClientHello.version processing needs to be separate code.
That's just written out fully in negotiate_version now. It also means
SSL_set_{min,max}_version will notice invalid inputs which aligns us
better with upstream's versions of those APIs.
This CL doesn't replace ssl->version with an internal-representation
version, though follow work should do it once a couple of changes land
in consumers.
BUG=90
Change-Id: Id2f5e1fa72847c823ee7f082e9e69f55e51ce9da
Reviewed-on: https://boringssl-review.googlesource.com/11122
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This withdraws support for -DBORINGSSL_ENABLE_RC4_TLS, and removes the
RC4 AEADs.
Change-Id: I1321b76bfe047d180743fa46d1b81c5d70c64e81
Reviewed-on: https://boringssl-review.googlesource.com/10940
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Change-Id: I676d7fb00d63d74946b96c22ae2705072033c5f7
Reviewed-on: https://boringssl-review.googlesource.com/10620
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Unlike the Scoped* types, bssl::UniquePtr is available to C++ users, and
offered for a large variety of types. The 'extern "C++"' trick is used
to make the C++ bits digestible to C callers that wrap header files in
'extern "C"'.
Change-Id: Ifbca4c2997d6628e33028c7d7620c72aff0f862e
Reviewed-on: https://boringssl-review.googlesource.com/10521
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Add a test that RSA-PSS is available in TLS 1.2 by default, both for
signing and verifying. Note that if a custom SSL_PRIVATE_KEY_METHOD is
used and it sets signing preferences, it won't use RSA-PSS if it doesn't
know about it. (See *-Sign-Negotiate-* tests.)
Change-Id: I3776a0c95480188a135795f7ebf31f2b0e0626cc
Reviewed-on: https://boringssl-review.googlesource.com/10723
Commit-Queue: David Benjamin <davidben@google.com>
Commit-Queue: Adam Langley <agl@google.com>
Reviewed-by: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
The early callback needs to run before even version negotiation has been
resolved.
Change-Id: Ibb449ccec07dedef19b7827400ef318fa2f422c0
Reviewed-on: https://boringssl-review.googlesource.com/10722
Commit-Queue: David Benjamin <davidben@google.com>
Commit-Queue: Adam Langley <agl@google.com>
Reviewed-by: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
For now, they can be restored by compiling with -DBORINGSSL_RC4_TLS.
Of note, this means that `MEDIUM' is now empty.
Change-Id: Ic77308e7bd4849bdb2b4882c6b34af85089fe3cc
Reviewed-on: https://boringssl-review.googlesource.com/10580
Reviewed-by: David Benjamin <davidben@google.com>
Reviewed-by: Matt Braithwaite <mab@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
Commit-Queue: Matt Braithwaite <mab@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
peer_sigalgs should live on SSL_HANDSHAKE. This both releases a little
bit of memory after the handshake is over and also avoids the bug where
the sigalgs get dropped if SSL_set_SSL_CTX is called at a bad time. See
also upstream's 14e14bf6964965d02ce89805d9de867f000095aa.
This only affects consumers using the old SNI callback and not
select_certificate_cb.
Add a test that the SNI callback works as expected. In doing so, add an
SSL_CTX version of the signing preferences API. This is a property of
the cert/key pair (really just the key) and should be tied to that. This
makes it a bit easier to have the regression test work with TLS 1.2 too.
I thought we'd fixed this already, but apparently not... :-/
BUG=95
Change-Id: I75b02fad4059e6aa46c3b05183a07d72880711b3
Reviewed-on: https://boringssl-review.googlesource.com/10445
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Change-Id: Ie60744761f5aa434a71a998f5ca98a8f8b1c25d5
Reviewed-on: https://boringssl-review.googlesource.com/10447
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
BUG=75
Change-Id: Ied864cfccbc0e68d71c55c5ab563da27b7253463
Reviewed-on: https://boringssl-review.googlesource.com/9043
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Extend the DTLS mock clock to apply to sessions too and test that
resumption behaves as expected.
Change-Id: Ib8fdec91b36e11cfa032872b63cf589f93b3da13
Reviewed-on: https://boringssl-review.googlesource.com/9110
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
We almost forgot to handle this in TLS 1.3, so add a test for it.
Change-Id: I28600325d8fb6c09365e909db607cbace12ecac7
Reviewed-on: https://boringssl-review.googlesource.com/9093
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
We'll need to update it on occasion, but we should not update our
default ClientHello without noticing.
Change-Id: I19ca52fdbe10e3ac14413fecd16be2e58af5a1f6
Reviewed-on: https://boringssl-review.googlesource.com/9075
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
SSL_set_bio is a nightmare.
In f715c42322, we noticed that, among
other problems, SSL_set_bio's actual behavior did not match how
SSL_set_rfd was calling it due to an asymmetry in the rbio/wbio
handling. This resulted in SSL_set_fd/SSL_set_rfd calls to crash. We
decided that SSL_set_rfd's believed semantics were definitive and
changed SSL_set_bio.
Upstream, in 65e2d672548e7c4bcb28f1c5c835362830b1745b, decided that
SSL_set_bio's behavior, asymmetry and all, was definitive and that the
SSL_set_rfd crash was a bug in SSL_set_rfd. Accordingly, they switched
the fd callers to use the side-specific setters, new in 1.1.0.
Align with upstream's behavior and add tests for all of SSL_set_bio's
insanity. Also export the new side-specific setters in anticipation of
wanting to be mostly compatible with OpenSSL 1.1.0.
Change-Id: Iceac9508711f79750a3cc2ded081b2bb2cbf54d8
Reviewed-on: https://boringssl-review.googlesource.com/9064
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
To prevent configuration/established session confusion, the handshake
session state is separated into the configured session (ssl->session)
and the newly created session (ssl->s3->new_session). Upon conclusion of
the handshake, the finalized session is stored
in (ssl->s3->established_session). During the handshake, any requests
for the session (SSL_get_session) return a non-resumable session, to
prevent resumption of a partially filled session. Sessions should only
be cached upon the completion of the full handshake, using the resulting
established_session. The semantics of accessors on the session are
maintained mid-renego.
Change-Id: I4358aecb71fce4fe14a6746c5af1416a69935078
Reviewed-on: https://boringssl-review.googlesource.com/8612
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This reverts commit 69f40dff83. I'm not
sure why the CQ didn't catch it while the bots didn't, but I'll look
into it after the QUIC BoF.
Change-Id: Ia187787c86aab082b9cffe0c86c828805dfc212d
Reviewed-on: https://boringssl-review.googlesource.com/8870
Reviewed-by: David Benjamin <davidben@google.com>
We'll need to update it on occasion, but we should not update our
default ClientHello without noticing.
Change-Id: Id9c4734f8e3f8c66b757a82ca123ce949bbcd02e
Reviewed-on: https://boringssl-review.googlesource.com/8845
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Between client and server, the second API behaves very very differently.
Change-Id: I2a6c3cab717466a2d67ae102810a5ecd99362d9e
Reviewed-on: https://boringssl-review.googlesource.com/8781
Commit-Queue: David Benjamin <davidben@google.com>
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Change-Id: I5addfb1e8ec97fc426ae8ca39769120856470451
Reviewed-on: https://boringssl-review.googlesource.com/8780
Commit-Queue: David Benjamin <davidben@google.com>
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
This reverts commits:
8d79ed674019fdcb52348d79ed6740
Because WebRTC (at least) includes our headers in an extern "C" block,
which precludes having any C++ in them.
Change-Id: Ia849f43795a40034cbd45b22ea680b51aab28b2d
This change scatters the contents of the two scoped_types.h files into
the headers for each of the areas of the code. The types are now in the
|bssl| namespace.
Change-Id: I802b8de68fba4786b6a0ac1bacd11d81d5842423
Reviewed-on: https://boringssl-review.googlesource.com/8731
Reviewed-by: Adam Langley <agl@google.com>
We currently have the situation where the |tool| and |bssl_shim| code
includes scoped_types.h from crypto/test and ssl/test. That's weird and
shouldn't happen. Also, our C++ consumers might quite like to have
access to the scoped types.
Thus this change moves some of the template code to base.h and puts it
all in a |bssl| namespace to prepare for scattering these types into
their respective headers. In order that all the existing test code be
able to access these types, it's all moved into the same namespace.
Change-Id: I3207e29474dc5fcc344ace43119df26dae04eabb
Reviewed-on: https://boringssl-review.googlesource.com/8730
Reviewed-by: David Benjamin <davidben@google.com>
OpenSSL's SSL_OP_NO_* flags allow discontinuous version ranges. This is a
nuisance for two reasons. First it makes it unnecessarily difficult to answer
"are any versions below TLS 1.3 enabled?". Second the protocol does not allow
discontinuous version ranges on the client anyway. OpenSSL instead picks the
first continous range of enabled versions on the client, but not the server.
This is bizarrely inconsistent. It also doesn't quite do this as the
ClientHello sending logic does this, but not the ServerHello processing logic.
So we actually break some invariants slightly. The logic is also cumbersome in
DTLS which kindly inverts the comparison logic.
First, switch min_version/max_version's storage to normalized versions. Next
replace all the ad-hoc version-related functions with a single
ssl_get_version_range function. Client and server now consistently pick a
contiguous range of versions. Note this is a slight behavior change for
servers. Version-range-sensitive logic is rewritten to use this new function.
BUG=66
Change-Id: Iad0d64f2b7a917603fc7da54c9fc6656c5fbdb24
Reviewed-on: https://boringssl-review.googlesource.com/8513
Reviewed-by: David Benjamin <davidben@google.com>
Saves us some mess if they're never zero. This also fixes a bug in
ssl3_get_max_client_version where it didn't account for all versions being
disabled properly.
Change-Id: I4c95ff57cf8953cb4a528263b252379f252f3e01
Reviewed-on: https://boringssl-review.googlesource.com/8512
Reviewed-by: David Benjamin <davidben@google.com>
SSL_set_bio has some rather complex ownership story because whether rbio/wbio
are both owning depends on whether they are equal. Moreover, whether
SSL_set_bio(ssl, rbio, wbio) frees ssl->rbio depends on whether rbio is the
existing rbio or not. The current logic doesn't even get it right; see tests.
Simplify this. First, rbio and wbio are always owning. All the weird ownership
cases which we're stuck with for compatibility will live in SSL_set_bio. It
will internally BIO_up_ref if necessary and appropriately no-op the left or
right side as needed. It will then call more well-behaved ssl_set_rbio or
ssl_set_wbio functions as necessary.
Change-Id: I6b4b34e23ed01561a8c0aead8bb905363ee413bb
Reviewed-on: https://boringssl-review.googlesource.com/8240
Reviewed-by: Adam Langley <agl@google.com>
Their implementations expose a lot of really weird SSL_set_bio behavior. Note
that one test must be disabled as it doesn't even work. The subsequent commit
will re-enable it.
Change-Id: I4b7acadd710b3be056951886fc3e073a5aa816de
Reviewed-on: https://boringssl-review.googlesource.com/8272
Reviewed-by: Adam Langley <agl@google.com>
OpenSSL was actually super-buggy here (though known bugs on our end have been
fixed), but pyOpenSSL was confused and incorrectly documented that callers call
SSL_read after SSL_shutdown to do bidi shutdown, so we should probably support
this. Add a test that it works.
Change-Id: I2b6d012161330aeb4cf894bae3a0b6a55d53c70d
Reviewed-on: https://boringssl-review.googlesource.com/8093
Reviewed-by: Adam Langley <agl@google.com>
This is easier to deploy, and more obvious. This commit reverts a few
pieces of e25775bc, but keeps most of it.
Change-Id: If8d657a4221c665349c06041bb12fffca1527a2c
Reviewed-on: https://boringssl-review.googlesource.com/8061
Reviewed-by: Adam Langley <agl@google.com>
Constants representing TLS 1.3 are added to allow for future work to be
flagged on TLS1_3_VERSION. To prevent BoringSSL from negotiating the
non-existent TLS 1.3 version, it is explicitly disabled using
SSL_OP_NO_TLSv1_3.
Change-Id: Ie5258a916f4c19ef21646c4073d5b4a7974d6f3f
Reviewed-on: https://boringssl-review.googlesource.com/8041
Reviewed-by: Adam Langley <agl@google.com>
