Add a slightly richer API. Notably, one can configure ssl_renegotiate_once to
only accept the first renego.
Also, this API doesn't repeat the mistake I made with
SSL_set_reject_peer_renegotiations which is super-confusing with the negation.
Change-Id: I7eb5d534e3e6c553b641793f4677fe5a56451c71
Reviewed-on: https://boringssl-review.googlesource.com/6221
Reviewed-by: Adam Langley <agl@google.com>
OpenSSL's BIO_get_fd returns the fd or -1, not a boolean.
Change-Id: I12a3429c71bb9c9064f9f91329a88923025f1fb5
Reviewed-on: https://boringssl-review.googlesource.com/6080
Reviewed-by: Adam Langley <agl@google.com>
This utility function is provided for API-compatibility and simply calls
|PKCS12_parse| internally.
BUG=536939
Change-Id: I86c548e5dfd64b6c473e497b95adfa5947fe9529
Reviewed-on: https://boringssl-review.googlesource.com/6008
Reviewed-by: Adam Langley <agl@google.com>
Somehow we ended up with duplicate 'Deprecated functions' sections.
PKCS12_get_key_and_certs ended up in one of them was probably an oversight.
Change-Id: Ia6d6a44132cb2730ee1f92a6bbcfa8ce168e7d08
Reviewed-on: https://boringssl-review.googlesource.com/6020
Reviewed-by: Adam Langley <agl@google.com>
I put an extra space in there. Also document ownership and return value.
Change-Id: I0635423be7774a7db54dbf638cc548d291121529
Reviewed-on: https://boringssl-review.googlesource.com/6010
Reviewed-by: Adam Langley <agl@google.com>
Also add an assert to that effect.
Change-Id: I1bd0571e3889f1cba968fd99041121ac42ee9e89
Reviewed-on: https://boringssl-review.googlesource.com/5990
Reviewed-by: Adam Langley <agl@google.com>
Putting it at the top was probably a mistake? Even though SSL_CIPHER
(like SSL_SESSION) doesn't depend on SSL, if you're reading through the
header, SSL_CTX and SSL are the most important types. You could even use
the library without touch cipher suite configs if you don't care since
the default is decently reasonable, though it does include a lot of
ciphers. (Hard to change that if we wanted to because DEFAULT is often
used somewhat like ALL and then people subtract from it.)
Change-Id: Ic9ddfc921858f7a4c141972fe0d1e465ca196b9d
Reviewed-on: https://boringssl-review.googlesource.com/5963
Reviewed-by: Adam Langley <agl@google.com>
The cipher suite rules could also be anchored on SSL_TXT_* if desired. I
currently documented them in prose largely because SSL_TXT_* also
defines protocol version strings and those are weird; SSL_TXT_TLSV1_1
isn't even a cipher rule. (And, in fact, those are the only SSL_TXT_*
macros that we can't blindly remove. I found some code that #ifdef's the
version SSL_TXT_* macros to decide if version-locked SSL_METHODs are
available.)
Also they clutter the header. I was thinking maybe we should dump a lot
of the random constants into a separate undocumented header or perhaps
just unexport them.
I'm slightly torn on this though and could easily be convinced in the
other direction. (Playing devil's advocate, anchoring on SSL_TXT_* means
we're less likely to forget to document one so long as adding a
SSL_TXT_* macro is the convention.)
Change-Id: Ide2ae44db9d6d8f29c24943090c210da0108dc37
Reviewed-on: https://boringssl-review.googlesource.com/5962
Reviewed-by: Adam Langley <agl@google.com>
This mirrors how the server halves fall under configuring certificates.
Change-Id: I9bde85eecfaff6487eeb887c88cb8bb0c36b83d8
Reviewed-on: https://boringssl-review.googlesource.com/5961
Reviewed-by: Adam Langley <agl@google.com>
The IUF functions were added for PEM and internally are very lenient to
whitespace and include other PEM-specific behaviors (notably they treat
hyphens as EOF). They also decode a ton of invalid input (see upstream's
RT #3757).
Upstream has a rewrite with tests that resolves the latter issue which
we should review and import. But this is still a very PEM-specific
interface. As this code has basically no callers outside the PEM code
(and any such callers likely don't want a PEM-specific API), it's
probably not worth the trouble to massage this and PEM into a strict IUF
base64 API with PEM whitespace and hyphen bits outside. Just deprecate
it all and leave it in a corner.
Change-Id: I5b98111e87436e287547829daa65e9c1efc95119
Reviewed-on: https://boringssl-review.googlesource.com/5952
Reviewed-by: Adam Langley <agl@google.com>
∙ Some comments had the wrong function name at the beginning.
∙ Some ARM asm ended up with two #if defined(__arm__) lines – one from
the .pl file and one inserted by the translation script.
Change-Id: Ia8032cd09f06a899bf205feebc2d535a5078b521
Reviewed-on: https://boringssl-review.googlesource.com/6000
Reviewed-by: Adam Langley <agl@google.com>
Change-Id: Ie75c68132fd501549b2ad5203663f6e99867eed6
Reviewed-on: https://boringssl-review.googlesource.com/5970
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
The |z| value should be 0x04 not 0x02
RT#3838
(Imported from upstream's 41fe7d2380617da515581503490f1467ee75a521.)
Change-Id: I35745cd2a5a32bd726cb4d3c0613cef2bcbef35b
Reviewed-on: https://boringssl-review.googlesource.com/5946
Reviewed-by: Adam Langley <agl@google.com>
Or at least group them together and make a passing attempt to document
them. The legacy X.509 stack itself remains largely untouched and most
of the parameters have to do with it.
Change-Id: I9e11e2ad1bbeef53478c787344398c0d8d1b3876
Reviewed-on: https://boringssl-review.googlesource.com/5942
Reviewed-by: Adam Langley <agl@google.com>
Allow configuring digest preferences for the private key. Some
smartcards have limited support for signing digests, notably Windows
CAPI keys and old Estonian smartcards. Chromium used the supports_digest
hook in SSL_PRIVATE_KEY_METHOD to limit such keys to SHA1. However,
detecting those keys was a heuristic, so some SHA256-capable keys
authenticating to SHA256-only servers regressed in the switch to
BoringSSL. Replace this mechanism with an API to configure digest
preference order. This way heuristically-detected SHA1-only keys may be
configured by Chromium as SHA1-preferring rather than SHA1-requiring.
In doing so, clean up the shared_sigalgs machinery somewhat.
BUG=468076
Change-Id: I996a2df213ae4d8b4062f0ab85b15262ca26f3c6
Reviewed-on: https://boringssl-review.googlesource.com/5755
Reviewed-by: Adam Langley <agl@google.com>
Not content with signing negative RSA moduli, still other Estonian IDs have too
many leading zeros. Work around those too.
This workaround will be removed in six months.
BUG=534766
Change-Id: Ica23b1b1499f9dbe39e94cf7b540900860e8e135
Reviewed-on: https://boringssl-review.googlesource.com/5980
Reviewed-by: Adam Langley <agl@google.com>
We wish to be able to detect the use of RC4 so that we can flag it and
investigate before it's disabled.
Change-Id: I6dc3a5d2211b281097531a43fadf08edb5a09646
Reviewed-on: https://boringssl-review.googlesource.com/5930
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
Get them out of the way when reading through the header.
Change-Id: Ied3f3601262e74570769cb7f858dcff4eff44813
Reviewed-on: https://boringssl-review.googlesource.com/5898
Reviewed-by: Adam Langley <agl@google.com>
Existing documentation was moved to the header, very slightly tweaked.
Change-Id: Ife3c2351e2d7e6a335854284f996918039414446
Reviewed-on: https://boringssl-review.googlesource.com/5897
Reviewed-by: Adam Langley <agl@google.com>
These were already documented, though some of the documentation was
expanded on slightly.
Change-Id: I04c6276a83a64a03ab9cce9b9c94d4dea9ddf638
Reviewed-on: https://boringssl-review.googlesource.com/5896
Reviewed-by: Adam Langley <agl@google.com>
All these functions were already documented, just not grouped. I put
these above DTLS-SRTP and PSK as they're considerably less niche of
features.
Change-Id: I610892ce9763fe0da4f65ec87e5c7aaecb10388b
Reviewed-on: https://boringssl-review.googlesource.com/5895
Reviewed-by: Adam Langley <agl@google.com>
Estonian IDs issued between September 2014 to September 2015 are broken and use
negative moduli. They last five years and are common enough that we need to
work around this bug.
Add parallel "buggy" versions of BN_cbs2unsigned and RSA_parse_public_key which
tolerate this mistake, to align with OpenSSL's previous behavior. This code is
currently hooked up to rsa_pub_decode in RSA_ASN1_METHOD so that d2i_X509 is
tolerant. (This isn't a huge deal as the rest of that stack still uses the
legacy ASN.1 code which is overly lenient in many other ways.)
In future, when Chromium isn't using crypto/x509 and has more unified
certificate handling code, we can put client certificates under a slightly
different codepath, so this needn't hold for all certificates forever. Then in
September 2019, when the broken Estonian certificates all expire, we can purge
this codepath altogether.
BUG=532048
Change-Id: Iadb245048c71dba2eec45dd066c4a6e077140751
Reviewed-on: https://boringssl-review.googlesource.com/5894
Reviewed-by: Adam Langley <agl@google.com>
This gets the documentation into the ssl.h documentation, and removes
one of the circularly-dependent headers hanging off ssl.h. Also fixes
some typos; there were a few instances of "SSL *ctx".
Change-Id: I2a41c6f518f4780af84d468ed220fe7b0b8eb0d3
Reviewed-on: https://boringssl-review.googlesource.com/5883
Reviewed-by: Adam Langley <agl@google.com>
Also switch to the new variable names (SSL_CTX *ctx, SSL *ssl,
SSL_SESSION *session) for all documented functions.
Change-Id: I15e15a703b96af1727601108223c7ce3b0691f1d
Reviewed-on: https://boringssl-review.googlesource.com/5882
Reviewed-by: Adam Langley <agl@google.com>
To be consistent with some of the other headers and because SSL_METHOD
no longer has a place to anchor documentation, move the type
documentation up to the corresponding section headers, rather than
attached to a convenient function.
Also document thread-safety properties of SSL and SSL_CTX.
Change-Id: I7109d704d28dda3f5d83c72d86fe31bc302b816e
Reviewed-on: https://boringssl-review.googlesource.com/5876
Reviewed-by: Adam Langley <agl@google.com>
This is arguably more commonly queried connection information than the
tls-unique.
Change-Id: I1f080536153ba9f178af8e92cb43b03df37110b5
Reviewed-on: https://boringssl-review.googlesource.com/5874
Reviewed-by: Adam Langley <agl@google.com>
Just the stuff that has been pulled out into sections already.
Change-Id: I3da6bc61d79ccfe2b18d888075dc32026a656464
Reviewed-on: https://boringssl-review.googlesource.com/5873
Reviewed-by: Adam Langley <agl@google.com>
Unfortunately, these are also some of the worst APIs in the SSL stack.
I've tried to capture all the things they expose to the caller. 0 vs -1
is intentionally left unexpanded on for now. Upstream's documentation
says 0 means transport EOF, which is a nice idea but isn't true. (A lot
of random functions return 0 on error and pass it up to the caller.)
https://crbug.com/466303 tracks fixing that.
SSL_set_bio is intentionally documented to NOT be usable when they're
already configured. The function tries to behave in this case and even
with additional cases when |rbio| and/or |wbio| are unchanged, but this
is buggy. For instance, this will explode:
SSL_set_bio(ssl, bio1, bio1);
SSL_set_bio(ssl, bio2, SSL_get_wbio(ssl));
As will this, though it's less clear this is part of the API contract
due to SSL taking ownership.
SSL_set_bio(ssl, bio1, bio2);
SSL_set_bio(ssl, bio2, bio1);
It also tries to handle ssl->bbio already existing, but I doubt it quite
works. Hopefully we can drop ssl->bbio eventually. (Why is this so
complicated...)
Change-Id: I5f9f3043915bffc67e2ebd282813e04afbe076e6
Reviewed-on: https://boringssl-review.googlesource.com/5872
Reviewed-by: Adam Langley <agl@google.com>
Change-Id: Ifa44fef160fc9d67771eed165f8fc277f28a0222
Reviewed-on: https://boringssl-review.googlesource.com/5840
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
A small handful of functions got a 'Deprecated:' prefix instead in
documentation.
Change-Id: Ic151fb7d797514add66bc6465b6851b666a471bc
Reviewed-on: https://boringssl-review.googlesource.com/5825
Reviewed-by: Adam Langley <agl@google.com>
We had a few duplicate section names.
Change-Id: I0c9b2a1669ac14392fd577097d5ee8dd80f7c73c
Reviewed-on: https://boringssl-review.googlesource.com/5824
Reviewed-by: Adam Langley <agl@google.com>
Callers that lack hardware random may obtain a speed improvement by
calling |RAND_enable_fork_unsafe_buffering|, which enables a
thread-local buffer around reads from /dev/urandom.
Change-Id: I46e675d1679b20434dd520c58ece0f888f38a241
Reviewed-on: https://boringssl-review.googlesource.com/5792
Reviewed-by: Adam Langley <agl@google.com>
History has shown there are bugs in not setting the error code
appropriately, which makes any decision making based on
|ERR_peek_last_error|, etc. suspect. Also, this call was interfering
with the link-time optimizer's ability to discard the implementations of
many functions in crypto/err during dead code elimination.
Change-Id: Iba9e553bf0a72a1370ceb17ff275f5a20fca31ec
Reviewed-on: https://boringssl-review.googlesource.com/5748
Reviewed-by: Adam Langley <agl@google.com>
Applications may require the stapled OCSP response in order to verify
the certificate within the verification callback.
Change-Id: I8002e527f90c3ce7b6a66e3203c0a68371aac5ec
Reviewed-on: https://boringssl-review.googlesource.com/5730
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
This change adds the ability to configure ciphers specifically for
TLS ≥ 1.0. This compliments the existing ability to specify ciphers
for TLS ≥ 1.1.
This is useful because TLS 1.0 is the first version not to suffer from
POODLE. (Assuming that it's implemented correctly[1].) Thus one might
wish to reserve RC4 solely for SSLv3.
[1] https://www.imperialviolet.org/2014/12/08/poodleagain.html
Change-Id: I774d5336fead48f03d8a0a3cf80c369692ee60df
Reviewed-on: https://boringssl-review.googlesource.com/5793
Reviewed-by: Adam Langley <agl@google.com>
This is useful to skip an optional element, and mirrors the behaviour of
CBS_get_optional_asn1_octet_string.
Change-Id: Icb538c5e99a1d4e46412cae3c438184a94fab339
Reviewed-on: https://boringssl-review.googlesource.com/5800
Reviewed-by: Adam Langley <agl@google.com>
If the two extensions select different next protocols (quite possible since one
is server-selected and the other is client-selected), things will break. This
matches the behavior of NSS (Firefox) and Go.
Change-Id: Ie1da97bf062b91a370c85c12bc61423220a22f36
Reviewed-on: https://boringssl-review.googlesource.com/5780
Reviewed-by: Adam Langley <agl@google.com>
The handshake state machine is still rather messy (we should switch to CBB,
split the key exchanges apart, and also pull reading and writing out), but this
version makes it more obvious to the compiler that |p| and |sig_len| are
initialized. The old logic created a synchronous-only state which, if enterred
directly, resulted in some variables being uninitialized.
Change-Id: Ia3ac9397d523fe299c50a95dc82a9b26304cea96
Reviewed-on: https://boringssl-review.googlesource.com/5765
Reviewed-by: Adam Langley <agl@google.com>
Move cert_chain to the SSL_SESSION. Now everything on an SSL_SESSION is
properly serialized. The cert_chain field is, unfortunately, messed up
since it means different things between client and server.
There exists code which calls SSL_get_peer_cert_chain as both client and
server and assumes the existing semantics for each. Since that function
doesn't return a newly-allocated STACK_OF(X509), normalizing between the
two formats is a nuisance (we'd either need to store both cert_chain and
cert_chain_full on the SSL_SESSION or create one of the two variants
on-demand and stash it into the SSL).
This CL does not resolve this and retains the client/server difference
in SSL_SESSION. The SSL_SESSION serialization is a little inefficient
(two copies of the leaf certificate) for a client, but clients don't
typically serialize sessions. Should we wish to resolve it in the
future, we can use a different tag number. Because this was historically
unserialized, existing code must already allow for cert_chain not being
preserved across i2d/d2i.
In keeping with the semantics of retain_only_sha256_of_client_certs,
cert_chain is not retained when that flag is set.
Change-Id: Ieb72fc62c3076dd59750219e550902f1ad039651
Reviewed-on: https://boringssl-review.googlesource.com/5759
Reviewed-by: Adam Langley <agl@google.com>
It's completely redundant with the copy in the SSL_SESSION except it
isn't serialized.
Change-Id: I1d95a14cae064c599e4bab576df1dd156da4b81c
Reviewed-on: https://boringssl-review.googlesource.com/5757
Reviewed-by: Adam Langley <agl@google.com>
Gets another field out of the SSL_SESSION.
Change-Id: I9a27255533f8e43e152808427466ec1306cfcc60
Reviewed-on: https://boringssl-review.googlesource.com/5756
Reviewed-by: Adam Langley <agl@google.com>
It's supposed to be void*. The only reason this was working was that it was
only called in C which happily casts from void* to T*. (But if called in C++ in
a macro, it breaks.)
Change-Id: I7f765c3572b9b4815ae58da852be1e742de1bd96
Reviewed-on: https://boringssl-review.googlesource.com/5760
Reviewed-by: Adam Langley <agl@google.com>
This begins decoupling the transport from the SSL state machine. The buffering
logic is hidden behind an opaque API. Fields like ssl->packet and
ssl->packet_length are gone.
ssl3_get_record and dtls1_get_record now call low-level tls_open_record and
dtls_open_record functions that unpack a single record independent of who owns
the buffer. Both may be called in-place. This removes ssl->rstate which was
redundant with the buffer length.
Future work will push the buffer up the stack until it is above the handshake.
Then we can expose SSL_open and SSL_seal APIs which act like *_open_record but
return a slightly larger enum due to other events being possible. Likewise the
handshake state machine will be detached from its buffer. The existing
SSL_read, SSL_write, etc., APIs will be implemented on top of SSL_open, etc.,
combined with ssl_read_buffer_* and ssl_write_buffer_*. (Which is why
ssl_read_buffer_extend still tries to abstract between TLS's and DTLS's fairly
different needs.)
The new buffering logic does not support read-ahead (removed previously) since
it lacks a memmove on ssl_read_buffer_discard for TLS, but this could be added
if desired. The old buffering logic wasn't quite right anyway; it tried to
avoid the memmove in some cases and could get stuck too far into the buffer and
not accept records. (The only time the memmove is optional is in DTLS or if
enough of the record header is available to know that the entire next record
would fit in the buffer.)
The new logic also now actually decrypts the ciphertext in-place again, rather
than almost in-place when there's an explicit nonce/IV. (That accidentally
switched in https://boringssl-review.googlesource.com/#/c/4792/; see
3d59e04bce96474099ba76786a2337e99ae14505.)
BUG=468889
Change-Id: I403c1626253c46897f47c7ae93aeab1064b767b2
Reviewed-on: https://boringssl-review.googlesource.com/5715
Reviewed-by: Adam Langley <agl@google.com>
This consists mostly of re-adding OpenSSL's implementation of PBKDF2
(very loosely based upon e0d26bb3). The meat of it, namely
|PKCS5_PBKDF2_HMAC|, was already present, but unused.
In addition, |PKCS8_encrypt| and |PKCS8_decrypt| must be changed to
not perform UCS-2 conversion in the PBES2 case.
Change-Id: Id170ecabc43c79491600051147d1d6d3c7273dbc
Reviewed-on: https://boringssl-review.googlesource.com/5745
Reviewed-by: Adam Langley <agl@google.com>
arm_arch.h is included from ARM asm files, but lives in crypto/, not
openssl/include/. Since the asm files are often built from a different
location than their position in the source tree, relative include paths
are unlikely to work so, rather than having crypto/ be a de-facto,
second global include path, this change moves arm_arch.h to
include/openssl/.
It also removes entries from many include paths because they should be
needed as relative includes are always based on the locations of the
source file.
Change-Id: I638ff43d641ca043a4fc06c0d901b11c6ff73542
Reviewed-on: https://boringssl-review.googlesource.com/5746
Reviewed-by: Adam Langley <agl@google.com>
Match the other stack-allocated types in that we expose a wrapper function to
get them into the zero state. Makes it more amenable to templates like
ScopedOpenSSLContext.
Change-Id: Ibc7b2b1bc0421ce5ccc84760c78c0b143441ab0f
Reviewed-on: https://boringssl-review.googlesource.com/5753
Reviewed-by: Adam Langley <agl@google.com>
This made sense when the cipher might have been standardized as-is, so a
DHE_RSA variant could appease the IETF. Since the standardized variant is going
to have some nonce tweaks anyway, there's no sense in keeping this around. Get
rid of one non-standard cipher suite value early. (Even if they were to be
standardized as-is, it's not clear we should implement new DHE cipher suites at
this point.)
Chrome UMA, unsurprisingly, shows that it's unused.
Change-Id: Id83d73a4294b470ec2e94d5308fba135d6eeb228
Reviewed-on: https://boringssl-review.googlesource.com/5750
Reviewed-by: Adam Langley <agl@google.com>
(I couldn't find an authoritative source of test data, including in
OpenSSL's source, so I used OpenSSL's implementation to produce the
test ciphertext.)
This benefits globalplatform.
Change-Id: Ifb79e77afb7efed1c329126a1a459bbf7ce6ca00
Reviewed-on: https://boringssl-review.googlesource.com/5725
Reviewed-by: Adam Langley <agl@google.com>
Note that while |DES_ede2_cbc_encrypt| exists, I didn't use it: I
think it's easier to see what's happening this way.
(I couldn't find an authoritative source of test data, including in
OpenSSL's source, so I used OpenSSL's implementation to produce the
test ciphertext.)
This benefits globalplatform.
Change-Id: I7e17ca0b69067d7b3f4bc213b4616eb269882ae0
Reviewed-on: https://boringssl-review.googlesource.com/5724
Reviewed-by: Adam Langley <agl@google.com>
|DES_ecb_encrypt| was already present.
This benefits globalplatform.
Change-Id: I2ab41eb1936b3026439b5981fb27e29a12672b66
Reviewed-on: https://boringssl-review.googlesource.com/5723
Reviewed-by: Adam Langley <agl@google.com>
This is a simpler implementation than OpenSSL's, lacking responder IDs
and request extensions support. This mirrors the client implementation
already present.
Change-Id: I54592b60e0a708bfb003d491c9250401403c9e69
Reviewed-on: https://boringssl-review.googlesource.com/5700
Reviewed-by: Adam Langley <agl@google.com>
They're not called (new in 1.0.2). We actually may well need to
configure these later to strike ECDSA from the list on Chrome/XP
depending on what TLS 1.3 does, but for now striking it from the cipher
suite list is both necessary and sufficient. I think we're better off
removing these for now and adding new APIs later if we need them.
(This API is weird. You pass in an array of NIDs that must be even
length and alternating between hash and signature NID. We'd also need a
way to query the configured set of sigalgs to filter away. Those used to
exist but were removed in
https://boringssl-review.googlesource.com/#/c/5347/. SSL_get_sigalgs is
an even uglier API and doesn't act on the SSL_CTX.)
And with that, SSL_ctrl and SSL_CTX_ctrl can *finally* be dropped. Don't
leave no-op wrappers; anything calling SSL_ctrl and SSL_CTX_ctrl should
instead switch to the wrapper macros.
BUG=404754
Change-Id: I5d465cd27eef30d108eeb6de075330c9ef5c05e8
Reviewed-on: https://boringssl-review.googlesource.com/5675
Reviewed-by: Adam Langley <agl@google.com>
I'm not sure why one would ever want to externally know the curve list
supported by the server. The API is new as of 1.0.2 and has no callers.
Configuring curves will be much more useful when Curve25519 exists and the API
isn't terribly crazy, so keep that API around and promote it to a real
function.
BUG=404754
Change-Id: Ibd5858791d3dfb30d53dd680cb75b0caddcbb7df
Reviewed-on: https://boringssl-review.googlesource.com/5674
Reviewed-by: Adam Langley <agl@google.com>
This change stores the size of the group/modulus (for RSA/DHE) or curve
ID (for ECDHE) in the |SSL_SESSION|. This makes it available for UIs
where desired.
Change-Id: I354141da432a08f71704c9683f298b361362483d
Reviewed-on: https://boringssl-review.googlesource.com/5280
Reviewed-by: Adam Langley <agl@google.com>
I'm not sure why I made a separate one. (Not quite how the V2ClientHello
code will look in the buffer-free API yet. Probably the future
refactored SSL_HANDSHAKE gadget will need separate entry points to
consume a handshake message or V2ClientHello and the driver deals with
framing.)
This also means that ssl3_setup_read_buffer is never called external to
ssl3_read_n.
BUG=468889
Change-Id: I872f1188270968bf53ee9d0488a761c772a11e9e
Reviewed-on: https://boringssl-review.googlesource.com/5713
Reviewed-by: Adam Langley <agl@google.com>
BN_bin2bn takes a size_t as it should, but it passes that into bn_wexpand which
takes unsigned. Switch bn_wexpand and bn_expand to take size_t before they
check bounds against INT_MAX.
BIGNUM itself still uses int everywhere and we may want to audit all the
arithmetic at some point. Although I suspect having bn_expand require that the
number of bits fit in an int is sufficient to make everything happy, unless
we're doing interesting arithmetic on the number of bits somewhere.
Change-Id: Id191a4a095adb7c938cde6f5a28bee56644720c6
Reviewed-on: https://boringssl-review.googlesource.com/5680
Reviewed-by: Adam Langley <agl@google.com>
This isn't called and, with the fixed-DH client cert types removed, is
only useful if a server wishes to not accept ECDSA certificates or
something.
BUG=404754
Change-Id: I21d8e1a71aedf446ce974fbeadc62f311ae086db
Reviewed-on: https://boringssl-review.googlesource.com/5673
Reviewed-by: Adam Langley <agl@google.com>
These are unused (new as of 1.0.2). Although being able to separate the
two stores is a reasonable thing to do, we hope to remove the
auto-chaining feature eventually. Given that, SSL_CTX_set_cert_store
should suffice. This gets rid of two more ctrl macros.
BUG=404754,486295
Change-Id: Id84de95d7b2ad5a14fc68a62bb2394f01fa67bb4
Reviewed-on: https://boringssl-review.googlesource.com/5672
Reviewed-by: Adam Langley <agl@google.com>
They were removed in the initial fork, but the ctrl macros remained.
BUG=404754
Change-Id: I5b20434faf494c54974a8d9a9df0e87ccf33c414
Reviewed-on: https://boringssl-review.googlesource.com/5670
Reviewed-by: Adam Langley <agl@google.com>
It's not clear why OpenSSL had a union. The comment says something about sizes
of long, since OpenSSL doesn't use stdint.h. But the variable is treated as a
bunch of uint32_t's, not DES_cblocks.
The key schedule is also always used by iterating or indexing into a uint32_t*,
treating the 16 2-word subkeys as a single uint32_t[32]. Instead, index into
them properly shush any picky tools. The compiler should be able to figure out
what's going on and optimize it appropriately.
BUG=517495
Change-Id: I83d0e63ac2c6fb76fac1dceda9f2fd6762074341
Reviewed-on: https://boringssl-review.googlesource.com/5627
Reviewed-by: Adam Langley <agl@google.com>
Rather than support arbitrarily many handshake hashes in the general
case (which the PRF logic assumes is capped at two), special-case the
MD5/SHA1 two-hash combination and otherwise maintain a single rolling
hash.
Change-Id: Ide9475565b158f6839bb10b8b22f324f89399f92
Reviewed-on: https://boringssl-review.googlesource.com/5618
Reviewed-by: Adam Langley <agl@google.com>
A memory BIO is internally a BUF_MEM anyway. There's no need to bring
BIO_write into the mix. BUF_MEM is size_t clean.
Change-Id: I4ec6e4d22c72696bf47c95861771013483f75cab
Reviewed-on: https://boringssl-review.googlesource.com/5616
Reviewed-by: Adam Langley <agl@google.com>
It's purely the PRF function now, although it's still different from the
rest due to the _DEFAULT field being weird.
Change-Id: Iaea7a99cccdc8be4cd60f6c1503df5be2a63c4c5
Reviewed-on: https://boringssl-review.googlesource.com/5614
Reviewed-by: Adam Langley <agl@google.com>
We never need to define the actual structs because we always cast them
before use. The types only exist to be distinct, and they can do that
without a definition.
Change-Id: I1e1ca0833b383f3be422675cb7b90dacbaf82acf
Reviewed-on: https://boringssl-review.googlesource.com/5593
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
Add it to |EVP_get_cipherbynid|, along with |EVP_rc2_40_cbc| and
|EVP_aes_192_cbc|.
Change-Id: Iee7621a91262359d1650684652995884a6cef37a
Reviewed-on: https://boringssl-review.googlesource.com/5590
Reviewed-by: Adam Langley <agl@google.com>
The split was only needed for buffering records. Likewise, the extra
seq_num field is now unnecessary.
This also fixes a bug where dtls1_process_record will push an error on
the queue if the decrypted record is too large, which dtls1_get_record
will ignore but fail to clear, leaving garbage on the error queue. The
error is now treated as fatal; the reason DTLS silently drops invalid
packets is worrying about ease of DoS, but after SSL_AEAD_CTX_open, the
packet has been authenticated. (Unless it's the null cipher, but that's
during the handshake and the handshake is already DoS-able by breaking
handshake reassembly state.)
The function is still rather a mess. Later changes will clean this up.
BUG=468889
Change-Id: I96a54afe0755d43c34456f76e77fc4ee52ad01e3
Reviewed-on: https://boringssl-review.googlesource.com/5557
Reviewed-by: Adam Langley <agl@google.com>
It will end up allowing some misuses of the error API to break silently,
so we're better off without it.
This reverts commit 0fba870578.
Change-Id: I486962c77cb18474ad9eee2acec86b631c99210d
16f774f8bf adds forward declarations for
everything in x509.h, but the typedefs are still in x509.h. Some versions of
clang flag the duplicate typedefs in C code.
Change-Id: Ib6684a238681d8c4fb1f0f91c3a6110013b3f4d6
Reviewed-on: https://boringssl-review.googlesource.com/5580
Reviewed-by: Adam Langley <agl@google.com>
(This is one of the most common errors that callers test for.)
Change-Id: Ic39b8dc6b5551de4a25e8517b9bbedf8a4a94d60
Reviewed-on: https://boringssl-review.googlesource.com/5534
Reviewed-by: Adam Langley <agl@google.com>
The only point format that we ever support is uncompressed, which the
RFC says implementations MUST support. The TLS 1.3 and Curve25519
forecast is that point format negotiation is gone. Each curve has just
one point format and it's labeled, for historial reasons, as
"uncompressed".
Change-Id: I8ffc8556bed1127cf288d2a29671abe3c9b3c585
Reviewed-on: https://boringssl-review.googlesource.com/5542
Reviewed-by: Adam Langley <agl@google.com>
MSVC and clang-cl automatically define |_WIN32| but |WIN32| is only
defined if a Windows header file has been included or if -DWIN32 was
passed on the command line. Thus, it is always better to test |_WIN32|
than |WIN32|. The convention in BoringSSL is to test |OPENSSL_WINDOWS|
instead, except for the place where |OPENSSL_WINDOWS| is defined.
Change-Id: Icf3e03958895be32efe800e689d5ed6a2fed215f
Reviewed-on: https://boringssl-review.googlesource.com/5553
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
It's never called anywhere and doesn't return anything interesting.
Change-Id: I68e7e9cd7b74a72f61092ac5d2b5d2390e55a228
Reviewed-on: https://boringssl-review.googlesource.com/5540
Reviewed-by: Adam Langley <agl@google.com>
The RSA key exchange needs decryption and is still unsupported.
Change-Id: I8c13b74e25a5424356afbe6e97b5f700a56de41f
Reviewed-on: https://boringssl-review.googlesource.com/5467
Reviewed-by: Adam Langley <agl@google.com>
This change mirrors upstream's custom extension API because we have some
internal users that depend on it.
Change-Id: I408e442de0a55df7b05c872c953ff048cd406513
Reviewed-on: https://boringssl-review.googlesource.com/5471
Reviewed-by: Adam Langley <agl@google.com>
These are not in upstream and were probably introduced on accident by stray vim
keystrokes.
Change-Id: I35f51f81fc37e75702e7d8ffc6f040ce71321b54
Reviewed-on: https://boringssl-review.googlesource.com/5490
Reviewed-by: Adam Langley <agl@google.com>
This means e.g. that a caller can say:
RAND_SSLEay()->bytes(...)
and so on. But in exchange for this convenience, I've changed the
signatures to be more BoringSSL-ish (|size_t| instead of |int|).
That's fine; |RAND_set_rand_method(SSLEay())| still works. And by
works I mean "does nothing".
Change-Id: I35479b5efb759da910ce46e22298168b78c9edcf
Reviewed-on: https://boringssl-review.googlesource.com/5472
Reviewed-by: Adam Langley <agl@google.com>
No functional changes but it saves diff noise in other changes in the
future.
Change-Id: Ib8bf43f1d108f6accdc2523db6d0edc5be77ba55
Reviewed-on: https://boringssl-review.googlesource.com/5468
Reviewed-by: Adam Langley <agl@google.com>
Fastradio was a trick where the ClientHello was padding to at least 1024
bytes in order to trick some mobile radios into entering high-power mode
immediately. After experimentation, the feature is being dropped.
This change also tidies up a bit of the extensions code now that
everything is using the new system.
Change-Id: Icf7892e0ac1fbe5d66a5d7b405ec455c6850a41c
Reviewed-on: https://boringssl-review.googlesource.com/5466
Reviewed-by: Adam Langley <agl@google.com>
This also removes support for the “old” Channel ID extension.
Change-Id: I1168efb9365c274db6b9d7e32013336e4404ff54
Reviewed-on: https://boringssl-review.googlesource.com/5462
Reviewed-by: Adam Langley <agl@google.com>
It's not DER and always parses the entire thing.
Change-Id: Idb4b8b93d5bc3689d8c3ea34c38b529e50a4af61
Reviewed-on: https://boringssl-review.googlesource.com/5451
Reviewed-by: Adam Langley <agl@google.com>
Rather, take a leaf out of Chromium's book and use MSVC's __cpuid and
_xgetbv built-in, with an inline assembly emulated version for other
compilers.
This preserves the behavior of the original assembly with the following
differences:
- CPUs without cpuid aren't support. Chromium's base/cpu.cc doesn't
check, and SSE2 support is part of our baseline; the perlasm code
is always built with OPENSSL_IA32_SSE2.
- The clear_xmm block in cpu-x86-asm.pl is removed. This was used to
clear some XMM-using features if OSXSAVE was set but XCR0 reports the
OS doesn't use XSAVE to store SSE state. This wasn't present in the
x86_64 and seems wrong. Section 13.5.2 of the Intel manual, volume 1,
explicitly says SSE may still be used in this case; the OS may save
that state in FXSAVE instead. A side discussion on upstream's RT#2633
agrees.
- The old code ran some AMD CPUs through the "intel" codepath and some
went straight to "generic" after duplicating some, but not all, logic.
The AMD copy didn't clear some reserved bits and didn't query CPUID 7
for AVX2 support. This is moot since AMD CPUs today don't support
AVX2, but it seems they're expected to in the future?
- Setting bit 10 is dropped. This doesn't appear to be queried anywhere,
was 32-bit only, and seems a remnant of upstream's
14e21f863a3e3278bb8660ea9844e92e52e1f2f7.
Change-Id: I0548877c97e997f7beb25e15f3fea71c68a951d2
Reviewed-on: https://boringssl-review.googlesource.com/5434
Reviewed-by: Adam Langley <agl@google.com>
Some other reserved bits are repurposed. Also explicitly mention that
bit 20 is zero (formerly RC4_CHAR), so it's not accidentally repurposed
later.
Change-Id: Idc4b32efe089ae7b7295472c4488f75258b7f962
Reviewed-on: https://boringssl-review.googlesource.com/5432
Reviewed-by: Adam Langley <agl@google.com>
Consumers sometimes use ERR_LIB_USER + <favorite number> instead of
ERR_get_next_error_library. To avoid causing them grief, keep ERR_LIB_USER
last.
Change-Id: Id19ae7836c41d5b156044bd20d417daf643bdda2
Reviewed-on: https://boringssl-review.googlesource.com/5290
Reviewed-by: Adam Langley <agl@google.com>
Running make_errors.go every time a function is renamed is incredibly
tedious. Plus we keep getting them wrong.
Instead, sample __func__ (__FUNCTION__ in MSVC) in the OPENSSL_PUT_ERROR macro
and store it alongside file and line number. This doesn't change the format of
ERR_print_errors, however ERR_error_string_n now uses the placeholder
"OPENSSL_internal" rather than an actual function name since that only takes
the uint32_t packed error code as input.
This updates err scripts to not emit the function string table. The
OPENSSL_PUT_ERROR invocations, for now, still include the extra
parameter. That will be removed in a follow-up.
BUG=468039
Change-Id: Iaa2ef56991fb58892fa8a1283b3b8b995fbb308d
Reviewed-on: https://boringssl-review.googlesource.com/5275
Reviewed-by: Adam Langley <agl@google.com>
poly1305.h was missing exports. While here, chacha.h should also be exported.
Change-Id: I5da9c953d3e5a5ef76a3e96bc4794192abee3ae6
Reviewed-on: https://boringssl-review.googlesource.com/5420
Reviewed-by: Adam Langley <agl@google.com>
RFC 7359 includes tests for various edge cases. Also, as
CRYPTO_poly1305_update can be used single-shot and streaming, we should
explicitly stress both.
Change-Id: Ie44c203a77624be10397ad05f06ca98d937db76f
Reviewed-on: https://boringssl-review.googlesource.com/5410
Reviewed-by: Adam Langley <agl@google.com>
It switched from CBB_remaining to CBB_len partway through review, but
the semantics are still CBB_remaining. Using CBB_len allows the
len_before/len_after logic to continue working even if, in the future,
handshake messages are built on a non-fixed CBB.
Change-Id: Id466bb341a14dbbafcdb26e4c940a04181f2787d
Reviewed-on: https://boringssl-review.googlesource.com/5371
Reviewed-by: Adam Langley <agl@google.com>
This removes the version field from RSA and instead handles versioning
as part of parsing. (As a bonus, we now correctly limit multi-prime RSA
to version 1 keys.)
Most consumers are also converted. old_rsa_priv_{de,en}code are left
alone for now. Those hooks are passed in parameters which match the old
d2i/i2d pattern (they're only used in d2i_PrivateKey and
i2d_PrivateKey).
Include a test which, among other things, checks that public keys being
serialized as private keys are handled properly.
BUG=499653
Change-Id: Icdd5f0382c4a84f9c8867024f29756e1a306ba08
Reviewed-on: https://boringssl-review.googlesource.com/5273
Reviewed-by: Adam Langley <agl@google.com>
This is the first structure to be implemented with the new BIGNUM ASN.1
routines. Object reuse in the legacy d2i/i2d functions is implemented by
releasing whatever was in *out before and setting it to the
newly-allocated object. As with the new d2i_SSL_SESSION, this is a
weaker form of object reuse, but should suffice for reasonable callers.
As ECDSA_SIG is more likely to be parsed alone than as part of another
structure (and using CBB is slightly tedious), add convenient functions
which take byte arrays. For consistency with SSL_SESSION, they are named
to/from_bytes. from_bytes, unlike the CBS variant, rejects trailing
data.
Note this changes some test expectations: BER signatures now push an
error code. That they didn't do this was probably a mistake.
BUG=499653
Change-Id: I9ec74db53e70d9a989412cc9e2b599be0454caec
Reviewed-on: https://boringssl-review.googlesource.com/5269
Reviewed-by: Adam Langley <agl@google.com>
This is certainly far from exhaustive, but get rid of these.
Change-Id: Ie96925bcd452873ed8399b68e1e71d63e5a0929b
Reviewed-on: https://boringssl-review.googlesource.com/5357
Reviewed-by: Adam Langley <agl@google.com>
Also document them in the process. Almost done!
BUG=404754
Change-Id: I3333c7e9ea6b4a4844f1cfd02bff8b5161b16143
Reviewed-on: https://boringssl-review.googlesource.com/5355
Reviewed-by: Adam Langley <agl@google.com>
The APIs that are CTRL macros will be documented (and converted to
functions) in a follow-up.
Change-Id: I7d086db1768aa3c16e8d7775b0c818b72918f4c2
Reviewed-on: https://boringssl-review.googlesource.com/5354
Reviewed-by: Adam Langley <agl@google.com>
This is unused. It seems to be distinct from the automatic chain
building and was added in 1.0.2. Seems to be an awful lot of machinery
that consumers ought to configure anyway.
BUG=486295
Change-Id: If3d4a2761f61c5b2252b37d4692089112fc0ec21
Reviewed-on: https://boringssl-review.googlesource.com/5353
Reviewed-by: Adam Langley <agl@google.com>
Without certificate slots this function doesn't do anything. It's new in
1.02 and thus unused, so get rid of it rather than maintain a
compatibility stub.
BUG=486295
Change-Id: I798fce7e4307724756ad4e14046f1abac74f53ed
Reviewed-on: https://boringssl-review.googlesource.com/5352
Reviewed-by: Adam Langley <agl@google.com>
This allows us to remove the confusing EVP_PKEY argument to the
SSL_PRIVATE_KEY_METHOD wrapper functions. It also simplifies some of the
book-keeping around the CERT structure, as well as the API for
configuring certificates themselves. The current one is a little odd as
some functions automatically route to the slot while others affect the
most recently touched slot. Others still (extra_certs) apply to all
slots, making them not terribly useful.
Consumers with complex needs should use cert_cb or the early callback
(select_certificate_cb) to configure whatever they like based on the
ClientHello.
BUG=486295
Change-Id: Ice29ffeb867fa4959898b70dfc50fc00137f01f3
Reviewed-on: https://boringssl-review.googlesource.com/5351
Reviewed-by: Adam Langley <agl@google.com>
This is in preparation for folding away certificate slots. extra_certs
and the slot-specific certificate chain will be the same.
SSL_CTX_get_extra_chain_certs already falls back to the slot-specific
chain if missing. SSL_CTX_get_extra_chain_certs_only is similar but
never falls back. This isn't very useful and is confusing with them
merged, so remove it.
BUG=486295
Change-Id: Ic708105bcf453dfe4e1969353d7eb7547ed2981b
Reviewed-on: https://boringssl-review.googlesource.com/5350
Reviewed-by: Adam Langley <agl@google.com>
There's no need to store more than the TLS values.
Change-Id: I1a93c7c6aa3254caf7cc09969da52713e6f8acf4
Reviewed-on: https://boringssl-review.googlesource.com/5348
Reviewed-by: Adam Langley <agl@google.com>
These are new as of 1.0.2, not terribly useful of APIs, and are the only
reason we have to retain so many NIDs in the TLS_SIGALGS structure.
Change-Id: I7237becca09acc2ec2be441ca17364f062253893
Reviewed-on: https://boringssl-review.googlesource.com/5347
Reviewed-by: Adam Langley <agl@google.com>
It's never used and is partially broken right now; EVP_PKEY_DH doesn't
work.
Change-Id: Id6262cd868153ef731e3f4d679b2ca308cfb12a3
Reviewed-on: https://boringssl-review.googlesource.com/5343
Reviewed-by: Adam Langley <agl@google.com>
RSA and ECDSA will both require being able to convert ASN.1 INTEGERs to
and from DER. Don't bother handling negative BIGNUMs for now. It doesn't
seem necessary and saves bothering with two's-complement vs
sign-and-magnitude.
BUG=499653
Change-Id: I1e80052067ed528809493af73b04f82539d564ff
Reviewed-on: https://boringssl-review.googlesource.com/5268
Reviewed-by: Adam Langley <agl@google.com>
The SSL23_ST_foo macros are only used in ssl_stat.c.
However, these states are never set and can be removed.
Move the two remaining SSLv2 client hello record macros to ssl3.h
Change-Id: I76055405a9050cf873b4d1cbc689e54dd3490b8a
Reviewed-on: https://boringssl-review.googlesource.com/4160
Reviewed-by: Adam Langley <agl@google.com>
All callers have been moved to EVP_PKEY_up_ref. (Neither spelling exists
upstream so we only had our own callers to move.)
Change-Id: I267f14054780fe3d6dc1170b7b6ae3811a0d1a9a
Reviewed-on: https://boringssl-review.googlesource.com/5291
Reviewed-by: Adam Langley <agl@google.com>
One tedious thing about using CBB is that you can't safely CBB_cleanup
until CBB_init is successful, which breaks the general 'goto err' style
of cleanup. This makes it possible:
CBB_zero ~ EVP_MD_CTX_init
CBB_init ~ EVP_DigestInit
CBB_cleanup ~ EVP_MD_CTX_cleanup
Change-Id: I085ecc4405715368886dc4de02285a47e7fc4c52
Reviewed-on: https://boringssl-review.googlesource.com/5267
Reviewed-by: Adam Langley <agl@google.com>
The name is confusing. EC keys aren't serialized to DER.
DSA keys are also weird, but left alone for now. i2d_DSAPublicKey either
serializes to a DSAPublicKey per RFC 3279 if write_params is 0 or what
seems to be an OpenSSL-specific format that includes the group if
write_params is 1. See upstream's
ea6b07b54c1f8fc2275a121cdda071e2df7bd6c1.
Change-Id: I0d15140acc2d688a563b615fc6a9e3abec929753
Reviewed-on: https://boringssl-review.googlesource.com/5261
Reviewed-by: Adam Langley <agl@google.com>
They're all forward-declared. There's no need to use the struct names.
Change-Id: I435ae2f5971128f08c730317ca644d97239f3b54
Reviewed-on: https://boringssl-review.googlesource.com/5260
Reviewed-by: Adam Langley <agl@google.com>
Use more sensible variable names. Also move some work between the helpers and
s3_srvr.c a little; the session lookup functions now only return a new session.
Whether to send a ticket is now an additional output to avoid the enum
explosion around renewal. The actual SSL state is not modified.
This is somewhat cleaner as s3_srvr.c may still reject a session for other
reasons, so we avoid setting ssl->session and ssl->verify_result to a session
that wouldn't be used. (They get fixed up in ssl_get_new_session, so it didn't
actually matter.)
Change-Id: Ib52fabbe993b5e2b7408395a02cdea3dee66df7b
Reviewed-on: https://boringssl-review.googlesource.com/5235
Reviewed-by: Adam Langley <agl@google.com>
This change also switches the behaviour of the client. Previously the
client would send the SCSV rather than the extension, but now it'll only
do that for SSLv3 connections.
Change-Id: I67a04b8abbef2234747c0dac450458deb6b0cd0a
Reviewed-on: https://boringssl-review.googlesource.com/5143
Reviewed-by: Adam Langley <agl@google.com>
Rather than four massive functions that handle every extension,
organise the code by extension with four smaller functions for each.
Change-Id: I876b31dacb05aca9884ed3ae7c48462e6ffe3b49
Reviewed-on: https://boringssl-review.googlesource.com/5142
Reviewed-by: Adam Langley <agl@google.com>
Chromium uses a zygote process and a sandbox on Linux. In order for RAND_bytes
to be functional and guaranteed fork-safe inside the renderers, /dev/urandom
must be prewarmed. Calling RAND_bytes initializes a thread-local ChaCha20 key
when rdrand is available. So that key is fork-safe and to avoid tempting any
dragons by touching pthreads APIs before a non-exec fork, add a
RAND_set_urandom_fd API. It allows the consumer to supply the /dev/urandom fd
and promises to be fork-safe, both in initializing key material and use of
pthreads.
This doesn't affect any current shipping versions of Chrome.
BUG=462040
Change-Id: I1037e21e525918971380e4ea1371703c8237a0b0
Reviewed-on: https://boringssl-review.googlesource.com/5302
Reviewed-by: Adam Langley <agl@google.com>
Having them spread between ssl.h and tls1.h isn't terribly enlightening.
Change-Id: I5fec4b8e5260312b22bcef21bd4db7a8a8149ad8
Reviewed-on: https://boringssl-review.googlesource.com/5234
Reviewed-by: Adam Langley <agl@google.com>
Using the original numerical order made more sense before they were changed to
doesnt_exist.
BUG=404754
Change-Id: I2971eff7c6fbe7c5d340b103de71bbfa180f1f96
Reviewed-on: https://boringssl-review.googlesource.com/5232
Reviewed-by: Adam Langley <agl@google.com>
This removes EVP_PKEY_HMAC and all the support code around it. EVP_MD requires
a lot of extra glue to support HMAC. This lets us prune it all away.
As a bonus, it removes a (minor) dependency from EVP to the legacy ASN.1 stack.
Change-Id: I5a9e3e39f518429828dbf13d14647fb37d9dc35a
Reviewed-on: https://boringssl-review.googlesource.com/5120
Reviewed-by: Adam Langley <agl@google.com>
The callback arguments are required to be NULL.
Change-Id: I266ec46efdaca411a7f0c2b645883b2c5bec1c96
Reviewed-on: https://boringssl-review.googlesource.com/5160
Reviewed-by: Adam Langley <agl@google.com>
They'll probably stay that way too, so document it as being an ignored
parameter.
Change-Id: Iff385715f5413290a7186c38ea9ef2dd4fce9b38
Reviewed-on: https://boringssl-review.googlesource.com/5175
Reviewed-by: Adam Langley <agl@google.com>
Rather than rely on Chromium to query SSL_initial_handshake_complete in the
callback (which didn't work anyway because the callback is called afterwards),
move the logic into BoringSSL. BoringSSL already enforces that clients never
offer resumptions on renegotiation (it wouldn't work well anyway as client
session cache lookup is external), so it's reasonable to also implement
in-library that sessions established on a renegotiation are not cached.
Add a bunch of tests that new_session_cb is called when expected.
BUG=501418
Change-Id: I42d44c82b043af72b60a0f8fdb57799e20f13ed5
Reviewed-on: https://boringssl-review.googlesource.com/5171
Reviewed-by: Adam Langley <agl@google.com>
Also implement it without reference to crypto/asn1 or fake ASN1_INTEGERs and
add a test. Some platform crypto APIs only give back the key size, and not the
encoded signature length. No sense in implementing it twice.
BUG=347404,499653
Change-Id: I9aa27d52674375f8b036e57bb5850f091c9b25dd
Reviewed-on: https://boringssl-review.googlesource.com/5080
Reviewed-by: Adam Langley <agl@google.com>
This adds a new API, SSL_set_private_key_method, which allows the consumer to
customize private key operations. For simplicity, it is incompatible with the
multiple slots feature (which will hopefully go away) but does not, for now,
break it.
The new method is only routed up for the client for now. The server will
require a decrypt hook as well for the plain RSA key exchange.
BUG=347404
Change-Id: I35d69095c29134c34c2af88c613ad557d6957614
Reviewed-on: https://boringssl-review.googlesource.com/5049
Reviewed-by: Adam Langley <agl@google.com>
Turns out the safer/simpler method still wasn't quite right. :-)
session->sess_cert isn't serialized and deserialized, which is poor. Duplicate
it manually for now. Leave a TODO to get rid of that field altogether as it's
not especially helpful. The certificate-related fields should be in the
session. The others probably have no reason to be preserved on resumptions at
all.
Test by making bssl_shim.cc assert the peer cert chain is there or not as
expected.
BUG=501220
Change-Id: I44034167629720d6e2b7b0b938d58bcab3ab0abe
Reviewed-on: https://boringssl-review.googlesource.com/5170
Reviewed-by: Adam Langley <agl@google.com>
To account for the changes in ticket renewal, Chromium will need to listen for
new_session_cb to determine whether the handshake produced a new session.
Chromium currently never caches sessions produced on a renegotiation. To retain
that behavior, it'll need to know whether new_session_cb is initial or not.
Rather than maintain duplicate state and listen for SSL_HANDSHAKE_DONE, it's
simpler to just let it query ssl->s3->initial_handshake_complete.
BUG=501418
Change-Id: Ib2f2541460bd09cf16106388e9cfdf3662e02681
Reviewed-on: https://boringssl-review.googlesource.com/5126
Reviewed-by: Adam Langley <agl@google.com>
Platform crypto APIs for PKCS#1 RSA signatures vary between expecting the
caller to prepend the DigestInfo prefix (RSA_sign_raw) and prepending it
internally (RSA_sign). Currently, Chromium implements sign or sign_raw as
appropriate. To avoid needing both variants, the new asynchronous methods will
only expose the higher-level one, sign.
To satisfy ports which previously implemented sign_raw, expose the DigestInfo
prefix as a utility function.
BUG=347404
Change-Id: I04c397b5e9502b2942f6698ecf81662a3c9282e6
Reviewed-on: https://boringssl-review.googlesource.com/4940
Reviewed-by: Adam Langley <agl@google.com>
See also upstream's 27c76b9b8010b536687318739c6f631ce4194688, CVE-2015-1791.
Rather than write a dup function, serializing and deserializing the object is
simpler. It also fixes a bug in the original fix where it never calls
new_session_cb to store the new session (for clients which use that callback;
how clients should handle the session cache is much less clear).
The old session isn't pruned as we haven't processed the Finished message yet.
RFC 5077 says:
The server MUST NOT assume that the client actually received the updated
ticket until it successfully verifies the client's Finished message.
Moreover, because network messages are asynchronous, a new SSL connection may
have began just before the client received the new ticket, so any such servers
are broken regardless.
Change-Id: I13b3dc986dc58ea2ce66659dbb29e14cd02a641b
Reviewed-on: https://boringssl-review.googlesource.com/5122
Reviewed-by: Adam Langley <agl@google.com>
Mirrors SSL_SESSION_to_bytes. It avoids having to deal with object-reuse, the
non-size_t length parameter, and trailing data. Both it and the object-reuse
variant back onto an unexposed SSL_SESSION_parse which reads a CBS.
Note that this changes the object reuse story slightly. It's now merely an
optional output pointer that frees its old contents. No d2i_SSL_SESSION
consumer in Google that's built does reuse, much less reuse with the assumption
that the top-level object won't be overridden.
Change-Id: I5cb8522f96909bb222cab0f342423f2dd7814282
Reviewed-on: https://boringssl-review.googlesource.com/5121
Reviewed-by: Adam Langley <agl@google.com>
We had aarch64 handled twice, which was a mistake.
Change-Id: Id27fc86cb701a87c11c54b98534108f87e49262d
Reviewed-on: https://boringssl-review.googlesource.com/5131
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
BN_copy can fail on malloc failure. The case in crypto/rsa was causing the
malloc tests in all_tests.go to infinite loop.
Change-Id: Id5900512013fba9960444d78a8c056aa4314fb2d
Reviewed-on: https://boringssl-review.googlesource.com/5110
Reviewed-by: Adam Langley <agl@google.com>
Some of the documentation had the right explanation but the incorrect
function names attached.
Change-Id: I7b479dae6d71a5ac7bc86df5a3890508c3b3d09f
Reviewed-on: https://boringssl-review.googlesource.com/5090
Reviewed-by: Adam Langley <agl@google.com>
If we're going to have PSK and use standard cipher suites, this might be
the best that we can do for the moment.
Change-Id: I35d9831b2991dc5b23c9e24d98cdc0db95919d39
Reviewed-on: https://boringssl-review.googlesource.com/5052
Reviewed-by: Adam Langley <agl@google.com>
This is the best PSK cipher suite, but it's non-standard and nobody is
using it. Trivial to bring back in the future if we have need of it.
Change-Id: Ie78790f102027c67d1c9b19994bfb10a2095ba92
Reviewed-on: https://boringssl-review.googlesource.com/5051
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
We shouldn't have protocol constraints that are sensitive to whether
data is returned synchronously or not.
Per https://boringssl-review.googlesource.com/#/c/4112/, the original
limitation was to avoid OpenSSL ABI changes. This is no longer a
concern.
Add tests for the sync and async case. Send the empty records in two
batches to ensure the count is reset correctly.
Change-Id: I3fee839438527e71adb83d437879bb0d49ca5c07
Reviewed-on: https://boringssl-review.googlesource.com/5040
Reviewed-by: Adam Langley <agl@google.com>
We have need of it internally.
Change-Id: I564af468728b22245e8eab384ea7018b7e88cc86
Reviewed-on: https://boringssl-review.googlesource.com/5022
Reviewed-by: Matt Braithwaite <mab@google.com>
Reviewed-by: Adam Langley <agl@google.com>
Change-Id: Ic82ab5de4e231cdf6230ee7262c3c7539404d4a6
Reviewed-on: https://boringssl-review.googlesource.com/5020
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
This change makes |CBS_get_any_asn1_element| only handle DER elements.
Another function, |CBS_get_any_ber_asn1_element| is exposed internally
for the cases where we need to process BER data.
Change-Id: I544141a1a3d7913986352a8fd9a6d00b9f282652
Reviewed-on: https://boringssl-review.googlesource.com/4994
Reviewed-by: Adam Langley <agl@google.com>
The client and server both have to decide on behaviour when resuming a
session where the EMS state of the session doesn't match the EMS state
as exchanged in the handshake.
Original handshake
| No Yes
------+--------------------------------------------------------------
|
R | Server: ok [1] Server: abort [3]
e No | Client: ok [2] Client: abort [4]
s |
u |
m |
e |
Yes | Server: don't resume No problem
| Client: abort; server
| shouldn't have resumed
[1] Servers want to accept legacy clients. The draft[5] says that
resumptions SHOULD be rejected so that Triple-Handshake can't be done,
but we'll rather enforce that EMS was used when using tls-unique etc.
[2] The draft[5] says that even the initial handshake should be aborted
if the server doesn't support EMS, but we need to be able to talk to the
world.
[3] This is a very weird case where a client has regressed without
flushing the session cache. Hopefully we can be strict and reject these.
[4] This can happen when a server-farm shares a session cache but
frontends are not all updated at once. If Chrome is strict here then
hopefully we can prevent any servers from existing that will try to
resume an EMS session that they don't understand. OpenSSL appears to be
ok here: https://www.ietf.org/mail-archive/web/tls/current/msg16570.html
[5] https://tools.ietf.org/html/draft-ietf-tls-session-hash-05#section-5.2
BUG=492200
Change-Id: Ie1225a3960d49117b05eefa5a36263d8e556e467
Reviewed-on: https://boringssl-review.googlesource.com/4981
Reviewed-by: Adam Langley <agl@google.com>
This implementation does not prompt for a password. It's just enough
to ensure that the many functions that take a tuple of
|pem_password_cb| and a |void *| to a password work in a reasonable
way when the latter is non-NULL.
Change-Id: Ic6bfc484630c67b5ede25277e14eb3b00c2024f0
Reviewed-on: https://boringssl-review.googlesource.com/4990
Reviewed-by: Adam Langley <agl@google.com>
The only flag is EVP_MD_CTX_FLAG_NO_INIT and no good can possibly come of
anyone outside EVP_PKEY_HMAC calling it. (And indeed no one calls it.
EVP_MD_CTX_set_flags has a caller in wpa_supplicant, but it uses
EVP_MD_CTX_FLAG_NON_FIPS_ALLOW which we don't define. The call is guarded by a
pair of ifdefs for some FIPS mode wpa_supplicant.)
Change-Id: I70ab8ffa646f3f75dfa4d37c96b9e82448ff1e40
Reviewed-on: https://boringssl-review.googlesource.com/4971
Reviewed-by: Adam Langley <agl@google.com>
It's never called externally and for good reason; the only flag to set is
EVP_MD_CTX_FLAG_NO_INIT which is an implementation detail of EVP_PKEY_HMAC
(hopefully to be removed eventually). Indeed, only EVP_PKEY_HMAC ever calls
this function. Except there's no need to because the HMAC_CTX has already been
initialized at that point. (And were it not initialized, that call would not
bode well for the poor HMAC_CTX.)
The legacy EVP_PKEY_HMAC API has test coverage and still works after this
change.
Change-Id: I2fb0bede3c24ad1519f9433f957606de15ba86c7
Reviewed-on: https://boringssl-review.googlesource.com/4970
Reviewed-by: Adam Langley <agl@google.com>
The SSL_PROTOCOL_METHOD table needs work, but this makes it clearer
exactly what the shared interface between the upper later and TLS/DTLS
is.
BUG=468889
Change-Id: I38931c484aa4ab3f77964d708d38bfd349fac293
Reviewed-on: https://boringssl-review.googlesource.com/4955
Reviewed-by: Adam Langley <agl@google.com>
Enough code fails to check their return codes anyway. We ought to make
it official.
Change-Id: Ie646360fd7073ea943036f5e21bed13df7e1b77a
Reviewed-on: https://boringssl-review.googlesource.com/4954
Reviewed-by: Adam Langley <agl@google.com>
The SHA-2 family has some exceptions, but they're all programmer errors
and should be documented as such. (Are the failure cases even
necessary?)
Change-Id: I00bd0a9450cff78d8caac479817fbd8d3de872b8
Reviewed-on: https://boringssl-review.googlesource.com/4953
Reviewed-by: Adam Langley <agl@google.com>
These defines are part of the the locking callbacks which have been
removed. However, code that still tries to provide locking callbacks
will need these values to compile.
The locking callback that such code tries to install will be ignored,
but that's harmless since BoringSSL handles locking itself now.
Change-Id: Ic84da8b52020ccd3ecc8913b4e41d366690c7649
Android needs to be able to read a PKCS#7 blob from a Java
InputStream. This change adds |BIO_read_asn1| which reads a single
ASN.1 object from the start of a BIO without overreading.
Change-Id: I74776e686529c8e58af1c26a4909f9bd4e87b707
If BN_rand is called with |bits| set to 1 and |top| set to 1 then a 1 byte
buffer overflow can occur.
See also upstream's efee575ad464bfb60bf72dcb73f9b51768f4b1a1. But rather than
making |BN_rand| fail, be consistent with the |bits| = 0 case and just don't
set the bits that don't exist. Add tests to ensure the degenerate cases behave.
Change-Id: I5e9fbe6fd8f7f7b2e011a680f2fbe6d7ed4dab65
Reviewed-on: https://boringssl-review.googlesource.com/4893
Reviewed-by: Adam Langley <agl@google.com>
The functions BN_rshift and BN_lshift shift their arguments to the right or
left by a specified number of bits. Unpredicatable results (including
crashes) can occur if a negative number is supplied for the shift value.
Thanks to Mateusz Kocielski (LogicalTrust), Marek Kroemeke and Filip Palian
for discovering and reporting this issue.
(Imported from upstream's 7cc18d8158b5fc2676393d99b51c30c135502107.)
Change-Id: Ib9f5e410a46df3d7f02a61374807fba209612bd3
Reviewed-on: https://boringssl-review.googlesource.com/4892
Reviewed-by: Adam Langley <agl@google.com>
This is documented as "Only request a client certificate on the initial TLS/SSL
handshake. Do not ask for a client certificate again in case of a
renegotiation." Server-side renegotiation is gone.
I'm not sure this flag has ever worked anyway, dating all the way back to
SSLeay 0.8.1b. ssl_get_new_session overwrites s->session, so the old
session->peer is lost.
Change-Id: Ie173243e189c63272c368a55167b8596494fd59c
Reviewed-on: https://boringssl-review.googlesource.com/4883
Reviewed-by: Adam Langley <agl@google.com>
(obj_dat.h and obj_mac.h are generated from the objects.txt change.)
See upstream's 3c161d081e2d30549e787437d05ffa08122a5114. Also see upstream's
12048657a91b12e499d03ec9ff406b42aba67366 to give zlib a better comment.
Change-Id: I86937f037f8e0f6179ba8072ccd972eca773c7ce
Reviewed-on: https://boringssl-review.googlesource.com/4882
Reviewed-by: Adam Langley <agl@google.com>
Never send the time as a client. Always send it as a server.
Change-Id: I20c55078cfe199d53dc002f6ee5dd57060b086d5
Reviewed-on: https://boringssl-review.googlesource.com/4829
Reviewed-by: Adam Langley <agl@google.com>
Yes, OpenSSL lets you randomly change its internal state. This is used
as part of server-side renegotiation. Server-side renegotiation is gone.
BUG=429450
Change-Id: Ic1b013705734357acf64e8bf89a051b2b7521c64
Reviewed-on: https://boringssl-review.googlesource.com/4828
Reviewed-by: Adam Langley <agl@google.com>
It's never called and the state is meaningless now.
Change-Id: I5429ec3eb7dc2b789c0584ea88323f0ff18920ae
Reviewed-on: https://boringssl-review.googlesource.com/4826
Reviewed-by: Adam Langley <agl@google.com>
When the peer or caller requests a renegotiation, OpenSSL doesn't
renegotiate immediately. It sets a flag to begin a renegotiation as soon
as record-layer read and write buffers are clear. One reason is that
OpenSSL's record layer cannot write a handshake record while an
application data record is being written. The buffer consistency checks
around partial writes will break.
None of these cases are relevant for the client auth hack. We already
require that renego come in at a quiescent part of the application
protocol by forbidding handshake/app_data interleave.
The new behavior is now: when a HelloRequest comes in, if the record
layer is not idle, the renegotiation is rejected as if
SSL_set_reject_peer_renegotiations were set. Otherwise we immediately
begin the new handshake. The server may not send any application data
between HelloRequest and completing the handshake. The HelloRequest may
not be consumed if an SSL_write is pending.
Note this does require that Chromium's HTTP stack not attempt to read
the HTTP response until the request has been written, but the
renegotiation logic already assumes it. Were Chromium to drive the
SSL_read state machine early and the server, say, sent a HelloRequest
after reading the request headers but before we've sent the whole POST
body, the SSL state machine may racily enter renegotiate early, block
writing the POST body on the new handshake, which would break Chromium's
ERR_SSL_CLIENT_AUTH_CERT_NEEDED plumbing.
BUG=429450
Change-Id: I6278240c3bceb5d2e1a2195bdb62dd9e0f4df718
Reviewed-on: https://boringssl-review.googlesource.com/4825
Reviewed-by: Adam Langley <agl@google.com>
The only case where renego is supported is if we are a client and the
server sends a HelloRequest. That is still needed to support the renego
+ client auth hack in Chrome. Beyond that, no other forms of renego will
work.
The messy logic where the handshake loop is repurposed to send
HelloRequest and the extremely confusing tri-state s->renegotiate (which
makes SSL_renegotiate_pending a lie during the initial handshake as a
server) are now gone. The next change will further simplify things by
removing ssl->s3->renegotiate and the renego deferral logic. There's
also some server-only renegotiation checks that can go now.
Also clean up ssl3_read_bytes' HelloRequest handling. The old logic relied on
the handshake state machine to reject bad HelloRequests which... actually that
code probably lets you initiate renego by sending the first four bytes of a
ServerHello and expecting the peer to read it later.
BUG=429450
Change-Id: Ie0f87d0c2b94e13811fe8e22e810ab2ffc8efa6c
Reviewed-on: https://boringssl-review.googlesource.com/4824
Reviewed-by: Adam Langley <agl@google.com>
Now that WebRTC honors packet boundaries (https://crbug.com/447431), we
can start enforcing them correctly. Configuring read-ahead now does
nothing. Instead DTLS will always set "read-ahead" and also correctly
enforce packet boundaries when reading records. Add tests to ensure that
badly fragmented packets are ignored. Because such packets don't fail
the handshake, the tests work by injecting an alert in the front of the
handshake stream and ensuring the DTLS implementation ignores them.
ssl3_read_n can be be considerably unraveled now, but leave that for
future cleanup. For now, make it correct.
BUG=468889
Change-Id: I800cfabe06615af31c2ccece436ca52aed9fe899
Reviewed-on: https://boringssl-review.googlesource.com/4820
Reviewed-by: Adam Langley <agl@google.com>
This isn't exhaustive. There are still failures in some tests which probably
ought to get C++'d first.
Change-Id: Iac58df9d98cdfd94603d54374a531b2559df64c3
Reviewed-on: https://boringssl-review.googlesource.com/4795
Reviewed-by: Adam Langley <agl@google.com>
tls1_enc is now SSL_AEAD_CTX_{open,seal}. This starts tidying up a bit
of the record-layer logic. This removes rr->input, as encrypting and
decrypting records no longer refers to various globals. It also removes
wrec altogether. SSL3_RECORD is now only used to maintain state about
the current incoming record. Outgoing records go straight to the write
buffer.
This also removes the outgoing alignment memcpy and simply calls
SSL_AEAD_CTX_seal with the parameters as appropriate. From bssl speed
tests, this seems to be faster on non-ARM and a bit of a wash on ARM.
Later it may be worth recasting these open/seal functions to write into
a CBB (tweaked so it can be malloc-averse), but for now they take an
out/out_len/max_out trio like their EVP_AEAD counterparts.
BUG=468889
Change-Id: Ie9266a818cc053f695d35ef611fd74c5d4def6c3
Reviewed-on: https://boringssl-review.googlesource.com/4792
Reviewed-by: Adam Langley <agl@google.com>
