This reverts commits:
8d79ed674019fdcb52348d79ed6740
Because WebRTC (at least) includes our headers in an extern "C" block,
which precludes having any C++ in them.
Change-Id: Ia849f43795a40034cbd45b22ea680b51aab28b2d
MSVC doesn't define __cplusplus as 201103 to indicate C++11 support, so
just assume that the compiler supports C++11 if _MSC_VER is defined.
Change-Id: I27f6eeefe6e8dc522470f36fab76ab36d85eebac
Reviewed-on: https://boringssl-review.googlesource.com/8734
Reviewed-by: David Benjamin <davidben@google.com>
This change scatters the contents of the two scoped_types.h files into
the headers for each of the areas of the code. The types are now in the
|bssl| namespace.
Change-Id: I802b8de68fba4786b6a0ac1bacd11d81d5842423
Reviewed-on: https://boringssl-review.googlesource.com/8731
Reviewed-by: Adam Langley <agl@google.com>
Also, update the documentation about aliasing for |BN_usub|. It might
be better to find a way to factor out the shared logic between the
tests of these functions and the tests of |BN_add| and |BN_usub|, but
doing so would end up up creating a lot of parameters due to the many
distinct strings used in the messages.
Change-Id: Ic9d714858212fc92aa6bbcc3959576fe6bbf58c3
Reviewed-on: https://boringssl-review.googlesource.com/8593
Reviewed-by: David Benjamin <davidben@google.com>
Also update the documentation for |BN_sub|.
Change-Id: I544dbfc56f22844f6ca08e9e472ec13e76baf8c4
Reviewed-on: https://boringssl-review.googlesource.com/8592
Reviewed-by: David Benjamin <davidben@google.com>
As of 67cb49d045 and the corresponding upstream
change, BN_mod_word may fail, like BN_div_word. Handle this properly and
document in bn.h. Thanks to Brian Smith for pointing this out.
Change-Id: I6d4f32dc37bcabf70847c9a8b417d55d31b3a380
Reviewed-on: https://boringssl-review.googlesource.com/8491
Reviewed-by: Adam Langley <agl@google.com>
This function is only really useful for DSA signature verification,
which is something that isn't performance-sensitive. Replace its
optimized implementation with a naïve implementation that's much
simpler.
Note that it would be simpler to use |BN_mod_mul| in the new
implementation; |BN_mod_mul_montgomery| is used instead only to be
consistent with other work being done to replace uses of non-Montgomery
modular reduction with Montgomery modular reduction.
Change-Id: If587d463b73dd997acfc5b7ada955398c99cc342
Reviewed-on: https://boringssl-review.googlesource.com/7732
Reviewed-by: David Benjamin <davidben@google.com>
|BN_mod_exp_mont_word| is only useful when the base is a single word
in length and timing side channel protection of the exponent is not
needed. That's never the case in real life.
Keep the function in the API, but removes its single-word-base
optimized implementation with a call to |BN_mod_exp_mont|.
Change-Id: Ic25f6d4f187210b681c6ee6b87038b64a5744958
Reviewed-on: https://boringssl-review.googlesource.com/7731
Reviewed-by: David Benjamin <davidben@google.com>
Previously, the verification was only done when using the CRT method,
as the CRT method has been shown to be extremely sensitive to fault
attacks. However, there's no reason to avoid doing the verification
when the non-CRT method is used (performance-sensitive applications
should always be using the CRT-capable keys).
Previously, when we detected a fault (attack) through this verification,
libcrypto would fall back to the non-CRT method and assume that the
non-CRT method would give a correct result, despite having just
detecting corruption that is likely from an attack. Instead, just give
up, like NSS does.
Previously, the code tried to handle the case where the input was not
reduced mod rsa->n. This is (was) not possible, so avoid trying to
handle that. This simplifies the equality check and lets us use
|CRYPTO_memcmp|.
Change-Id: I78d1e55520a1c8c280cae2b7256e12ff6290507d
Reviewed-on: https://boringssl-review.googlesource.com/7582
Reviewed-by: David Benjamin <davidben@google.com>
aosp-master has been updated past the point that this is necessary. Sadly, all
the other hacks still are. I'll try to get things rolling so we can ditch the
others in time.
Change-Id: If7b3aad271141fb26108a53972d2d3273f956e8d
Reviewed-on: https://boringssl-review.googlesource.com/7751
Reviewed-by: Adam Langley <agl@google.com>
This reduces the chance of double-frees.
BUG=10
Change-Id: I11a240e2ea5572effeddc05acb94db08c54a2e0b
Reviewed-on: https://boringssl-review.googlesource.com/7583
Reviewed-by: David Benjamin <davidben@google.com>
There's many ways to serialize a BIGNUM, so not including asn1 in the name is
confusing (and collides with BN_bn2cbb_padded). Since BN_asn12bn looks
ridiculous, match the parse/marshal naming scheme of other modules instead.
Change-Id: I53d22ae0537a98e223ed943e943c48cb0743cf51
Reviewed-on: https://boringssl-review.googlesource.com/6822
Reviewed-by: Adam Langley <alangley@gmail.com>
This relieves some complexity budget for adding Curve25519 to this
code.
This also adds a BN_bn2cbb_padded helper function since this seems to be a
fairly common need.
Change-Id: Ied0066fdaec9d02659abd6eb1a13f33502c9e198
Reviewed-on: https://boringssl-review.googlesource.com/6767
Reviewed-by: Adam Langley <agl@google.com>
The |ri| field was only used in |BN_MONT_CTX_set|, so make it a local
variable of that function.
Change-Id: Id8c3d44ac2e30e3961311a7b1a6731fe2c33a0eb
Reviewed-on: https://boringssl-review.googlesource.com/6526
Reviewed-by: Adam Langley <agl@google.com>
Most functions can take this in as const. Note this changes an
RSA_METHOD hook, though one I would not expect anyone to override.
Change-Id: Ib70ae65e5876b01169bdc594e465e3e3c4319a8b
Reviewed-on: https://boringssl-review.googlesource.com/6419
Reviewed-by: Adam Langley <agl@google.com>
This change fixes up several comments (many of which were spotted by
Kenny Root) and also changes doc.go to detect cases where comments don't
start with the correct word. (This is a common error.)
Since we have docs builders now, these errors will be found
automatically in the future.
Change-Id: I58c6dd4266bf3bd4ec748763c8762b1a67ae5ab3
Reviewed-on: https://boringssl-review.googlesource.com/6440
Reviewed-by: Adam Langley <agl@google.com>
BN_mod_exp_mont_consttime does not modify its |BN_MONT_CTX| so that
value should be const.
Change-Id: Ie74e48eec8061899fd056fbd99dcca2a86b02cad
Reviewed-on: https://boringssl-review.googlesource.com/6403
Reviewed-by: Adam Langley <agl@google.com>
One less exported function. Nothing ever stack-allocates them, within BoringSSL
or in consumers. This avoids the slightly odd mechanism where BN_MONT_CTX_free
might or might not free the BN_MONT_CTX itself based on a flag.
(This is also consistent with OpenSSL 1.1.x which does away with the _init
variants of both this and BIGNUM so it shouldn't be a compatibility concern
long-term either.)
Change-Id: Id885ae35a26f75686cc68a8aa971e2ea6767ba88
Reviewed-on: https://boringssl-review.googlesource.com/6350
Reviewed-by: Adam Langley <alangley@gmail.com>
Not content with signing negative RSA moduli, still other Estonian IDs have too
many leading zeros. Work around those too.
This workaround will be removed in six months.
BUG=534766
Change-Id: Ica23b1b1499f9dbe39e94cf7b540900860e8e135
Reviewed-on: https://boringssl-review.googlesource.com/5980
Reviewed-by: Adam Langley <agl@google.com>
Estonian IDs issued between September 2014 to September 2015 are broken and use
negative moduli. They last five years and are common enough that we need to
work around this bug.
Add parallel "buggy" versions of BN_cbs2unsigned and RSA_parse_public_key which
tolerate this mistake, to align with OpenSSL's previous behavior. This code is
currently hooked up to rsa_pub_decode in RSA_ASN1_METHOD so that d2i_X509 is
tolerant. (This isn't a huge deal as the rest of that stack still uses the
legacy ASN.1 code which is overly lenient in many other ways.)
In future, when Chromium isn't using crypto/x509 and has more unified
certificate handling code, we can put client certificates under a slightly
different codepath, so this needn't hold for all certificates forever. Then in
September 2019, when the broken Estonian certificates all expire, we can purge
this codepath altogether.
BUG=532048
Change-Id: Iadb245048c71dba2eec45dd066c4a6e077140751
Reviewed-on: https://boringssl-review.googlesource.com/5894
Reviewed-by: Adam Langley <agl@google.com>
History has shown there are bugs in not setting the error code
appropriately, which makes any decision making based on
|ERR_peek_last_error|, etc. suspect. Also, this call was interfering
with the link-time optimizer's ability to discard the implementations of
many functions in crypto/err during dead code elimination.
Change-Id: Iba9e553bf0a72a1370ceb17ff275f5a20fca31ec
Reviewed-on: https://boringssl-review.googlesource.com/5748
Reviewed-by: Adam Langley <agl@google.com>
BN_bin2bn takes a size_t as it should, but it passes that into bn_wexpand which
takes unsigned. Switch bn_wexpand and bn_expand to take size_t before they
check bounds against INT_MAX.
BIGNUM itself still uses int everywhere and we may want to audit all the
arithmetic at some point. Although I suspect having bn_expand require that the
number of bits fit in an int is sufficient to make everything happy, unless
we're doing interesting arithmetic on the number of bits somewhere.
Change-Id: Id191a4a095adb7c938cde6f5a28bee56644720c6
Reviewed-on: https://boringssl-review.googlesource.com/5680
Reviewed-by: Adam Langley <agl@google.com>
Running make_errors.go every time a function is renamed is incredibly
tedious. Plus we keep getting them wrong.
Instead, sample __func__ (__FUNCTION__ in MSVC) in the OPENSSL_PUT_ERROR macro
and store it alongside file and line number. This doesn't change the format of
ERR_print_errors, however ERR_error_string_n now uses the placeholder
"OPENSSL_internal" rather than an actual function name since that only takes
the uint32_t packed error code as input.
This updates err scripts to not emit the function string table. The
OPENSSL_PUT_ERROR invocations, for now, still include the extra
parameter. That will be removed in a follow-up.
BUG=468039
Change-Id: Iaa2ef56991fb58892fa8a1283b3b8b995fbb308d
Reviewed-on: https://boringssl-review.googlesource.com/5275
Reviewed-by: Adam Langley <agl@google.com>
RSA and ECDSA will both require being able to convert ASN.1 INTEGERs to
and from DER. Don't bother handling negative BIGNUMs for now. It doesn't
seem necessary and saves bothering with two's-complement vs
sign-and-magnitude.
BUG=499653
Change-Id: I1e80052067ed528809493af73b04f82539d564ff
Reviewed-on: https://boringssl-review.googlesource.com/5268
Reviewed-by: Adam Langley <agl@google.com>
BN_copy can fail on malloc failure. The case in crypto/rsa was causing the
malloc tests in all_tests.go to infinite loop.
Change-Id: Id5900512013fba9960444d78a8c056aa4314fb2d
Reviewed-on: https://boringssl-review.googlesource.com/5110
Reviewed-by: Adam Langley <agl@google.com>
If BN_rand is called with |bits| set to 1 and |top| set to 1 then a 1 byte
buffer overflow can occur.
See also upstream's efee575ad464bfb60bf72dcb73f9b51768f4b1a1. But rather than
making |BN_rand| fail, be consistent with the |bits| = 0 case and just don't
set the bits that don't exist. Add tests to ensure the degenerate cases behave.
Change-Id: I5e9fbe6fd8f7f7b2e011a680f2fbe6d7ed4dab65
Reviewed-on: https://boringssl-review.googlesource.com/4893
Reviewed-by: Adam Langley <agl@google.com>
The functions BN_rshift and BN_lshift shift their arguments to the right or
left by a specified number of bits. Unpredicatable results (including
crashes) can occur if a negative number is supplied for the shift value.
Thanks to Mateusz Kocielski (LogicalTrust), Marek Kroemeke and Filip Palian
for discovering and reporting this issue.
(Imported from upstream's 7cc18d8158b5fc2676393d99b51c30c135502107.)
Change-Id: Ib9f5e410a46df3d7f02a61374807fba209612bd3
Reviewed-on: https://boringssl-review.googlesource.com/4892
Reviewed-by: Adam Langley <agl@google.com>
inttypes.h kindly requires a feature macro in C++ on some platforms, due
to a bizarre footnote in C99 (see footnote 191 in section 7.8.1). As
bn.h is a public header, we must leak this wart to the consumer. On
platforms with unfriendly inttypes.h headers, using BN_DEC_FMT1 and
friends now require the feature macro be defined externally.
This broke the Chromium Android Clang builder:
http://build.chromium.org/p/chromium.linux/builders/Android%20Clang%20Builder%20%28dbg%29/builds/59288
Change-Id: I88275a6788c7babd0eae32cae86f115bfa93a591
Reviewed-on: https://boringssl-review.googlesource.com/4688
Reviewed-by: Adam Langley <agl@google.com>
This introduces a per-RSA/DSA/DH lock. This is good for lock contention,
although pthread locks are depressingly bloated.
Change-Id: I07c4d1606fc35135fc141ebe6ba904a28c8f8a0c
Reviewed-on: https://boringssl-review.googlesource.com/4324
Reviewed-by: Adam Langley <agl@google.com>
Along the way, fix a host of missing failure checks. This will save some
headache when it comes time to run these under the malloc failure tests.
Change-Id: I3fd589bd094178723398e793d6bc578884e99b67
Reviewed-on: https://boringssl-review.googlesource.com/4126
Reviewed-by: Adam Langley <agl@google.com>
This saves about 6-7k of error data.
Change-Id: Ic28593d4a1f5454f00fb2399d281c351ee57fb14
Reviewed-on: https://boringssl-review.googlesource.com/3385
Reviewed-by: Adam Langley <agl@google.com>
Some parts of Android can't be updated yet so this change adds
declarations (only) for some functions that will be stubbed in
Android-specific code. (That Android-specific code will live in the
Android repo, not the BoringSSL repo.)
Trying to use these functions outside of Android will result in a link
error.
Change-Id: Iaa9b956e6408d21cd8fc34d90d9c15657e429877
Reviewed-on: https://boringssl-review.googlesource.com/2760
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
This function was missed when the OPENSSL_EXPORT tags were first added.
Change-Id: Ia73555b8e7ca87f228a8ff9b281d7c401f1655a7
Reviewed-on: https://boringssl-review.googlesource.com/1553
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
Android uses these for some conversions from Java formats. The code is
sufficiently bespoke that putting the conversion functions into
BoringSSL doesn't make a lot of sense, but the alternative is to expose
these ones.
Change-Id: If1362bc4a5c44cba4023c909e2ba6488ae019ddb
This change marks public symbols as dynamically exported. This means
that it becomes viable to build a shared library of libcrypto and libssl
with -fvisibility=hidden.
On Windows, one not only needs to mark functions for export in a
component, but also for import when using them from a different
component. Because of this we have to build with
|BORINGSSL_IMPLEMENTATION| defined when building the code. Other
components, when including our headers, won't have that defined and then
the |OPENSSL_EXPORT| tag becomes an import tag instead. See the #defines
in base.h
In the asm code, symbols are now hidden by default and those that need
to be exported are wrapped by a C function.
In order to support Chromium, a couple of libssl functions were moved to
ssl.h from ssl_locl.h: ssl_get_new_session and ssl_update_cache.
Change-Id: Ib4b76e2f1983ee066e7806c24721e8626d08a261
Reviewed-on: https://boringssl-review.googlesource.com/1350
Reviewed-by: Adam Langley <agl@google.com>
Previously, public headers lived next to the respective code and there
were symlinks from include/openssl to them.
This doesn't work on Windows.
This change moves the headers to live in include/openssl. In cases where
some symlinks pointed to the same header, I've added a file that just
includes the intended target. These cases are all for backwards-compat.
Change-Id: I6e285b74caf621c644b5168a4877db226b07fd92
Reviewed-on: https://boringssl-review.googlesource.com/1180
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
Initial fork from f2d678e6e89b6508147086610e985d4e8416e867 (1.0.2 beta).
(This change contains substantial changes from the original and
effectively starts a new history.)
