When the peer or caller requests a renegotiation, OpenSSL doesn't
renegotiate immediately. It sets a flag to begin a renegotiation as soon
as record-layer read and write buffers are clear. One reason is that
OpenSSL's record layer cannot write a handshake record while an
application data record is being written. The buffer consistency checks
around partial writes will break.
None of these cases are relevant for the client auth hack. We already
require that renego come in at a quiescent part of the application
protocol by forbidding handshake/app_data interleave.
The new behavior is now: when a HelloRequest comes in, if the record
layer is not idle, the renegotiation is rejected as if
SSL_set_reject_peer_renegotiations were set. Otherwise we immediately
begin the new handshake. The server may not send any application data
between HelloRequest and completing the handshake. The HelloRequest may
not be consumed if an SSL_write is pending.
Note this does require that Chromium's HTTP stack not attempt to read
the HTTP response until the request has been written, but the
renegotiation logic already assumes it. Were Chromium to drive the
SSL_read state machine early and the server, say, sent a HelloRequest
after reading the request headers but before we've sent the whole POST
body, the SSL state machine may racily enter renegotiate early, block
writing the POST body on the new handshake, which would break Chromium's
ERR_SSL_CLIENT_AUTH_CERT_NEEDED plumbing.
BUG=429450
Change-Id: I6278240c3bceb5d2e1a2195bdb62dd9e0f4df718
Reviewed-on: https://boringssl-review.googlesource.com/4825
Reviewed-by: Adam Langley <agl@google.com>
The only case where renego is supported is if we are a client and the
server sends a HelloRequest. That is still needed to support the renego
+ client auth hack in Chrome. Beyond that, no other forms of renego will
work.
The messy logic where the handshake loop is repurposed to send
HelloRequest and the extremely confusing tri-state s->renegotiate (which
makes SSL_renegotiate_pending a lie during the initial handshake as a
server) are now gone. The next change will further simplify things by
removing ssl->s3->renegotiate and the renego deferral logic. There's
also some server-only renegotiation checks that can go now.
Also clean up ssl3_read_bytes' HelloRequest handling. The old logic relied on
the handshake state machine to reject bad HelloRequests which... actually that
code probably lets you initiate renego by sending the first four bytes of a
ServerHello and expecting the peer to read it later.
BUG=429450
Change-Id: Ie0f87d0c2b94e13811fe8e22e810ab2ffc8efa6c
Reviewed-on: https://boringssl-review.googlesource.com/4824
Reviewed-by: Adam Langley <agl@google.com>
This is considerably less scary than swapping out connection state. It also
fixes a minor bug where, if dtls1_do_write had an alert to dispatch and we
happened to retry during a rexmit, it would use the wrong epoch.
BUG=468889
Change-Id: I754b0d46bfd02f797f4c3f7cfde28d3e5f30c52b
Reviewed-on: https://boringssl-review.googlesource.com/4793
Reviewed-by: Adam Langley <agl@google.com>
tls1_enc is now SSL_AEAD_CTX_{open,seal}. This starts tidying up a bit
of the record-layer logic. This removes rr->input, as encrypting and
decrypting records no longer refers to various globals. It also removes
wrec altogether. SSL3_RECORD is now only used to maintain state about
the current incoming record. Outgoing records go straight to the write
buffer.
This also removes the outgoing alignment memcpy and simply calls
SSL_AEAD_CTX_seal with the parameters as appropriate. From bssl speed
tests, this seems to be faster on non-ARM and a bit of a wash on ARM.
Later it may be worth recasting these open/seal functions to write into
a CBB (tweaked so it can be malloc-averse), but for now they take an
out/out_len/max_out trio like their EVP_AEAD counterparts.
BUG=468889
Change-Id: Ie9266a818cc053f695d35ef611fd74c5d4def6c3
Reviewed-on: https://boringssl-review.googlesource.com/4792
Reviewed-by: Adam Langley <agl@google.com>
Chromium's session cache has since been rewritten and no longer needs to
muck with those functions in tests.
Change-Id: I2defad81513210dca5e105757e04cbb677583251
Reviewed-on: https://boringssl-review.googlesource.com/4788
Reviewed-by: Adam Langley <agl@google.com>
SSL_get_current_cipher is documented by upstream to return the cipher actually
being used. However, because it reads s->session, it returns information
pertaining to the session to be offered if queried before ServerHello or early
in an abbreviated handshake.
Logic around s->session needs more comprehensive cleanup but for just this
function, defining it to be the current outgoing cipher is close to the current
semantics but for fixing the initial state (s->session->cipher is populated
when sending CCS). Store it in the SSL_AEAD_CTX which seems a natural place to
associate state pertaining to a connection half.
BUG=484744
Change-Id: Ife8db27a16615d0dbb2aec65359537243e08af7c
Reviewed-on: https://boringssl-review.googlesource.com/4733
Reviewed-by: Adam Langley <agl@google.com>
Nothing should call ssl3_setup_read_buffer or ssl3_setup_write_buffer unless it
intends to write into the buffer. This way buffer management can later be an
implementation detail of the record layer.
Change-Id: Idb0effba00e77c6169764843793f40ec37868b61
Reviewed-on: https://boringssl-review.googlesource.com/4687
Reviewed-by: Adam Langley <agl@google.com>
It's completely redundant with the extend bit. If extend is 0, we're reading a
new record, and rbuf.len is passed. Then it needs to get clamped by ssl3_read_n
post alignment anyway. If extend is 1, we're reading the rest of the current
record and max is always n. (For TLS, we actually could just read more, but not
for DTLS. Basically no one sets it on the TLS side of things, so instead, after
WebRTC's broken DTLS handling is fixed, read_ahead can go away altogether and
DTLS/TLS record layers can be separated.)
This removes ssl3_read_n's callers' dependency on ssl3_setup_read_buffer
setting up rbuf.len.
Change-Id: Iaf11535d01017507a52a33b19240f42984d6cf52
Reviewed-on: https://boringssl-review.googlesource.com/4686
Reviewed-by: Adam Langley <agl@google.com>
With DTLSv1_get_timeout de-ctrl-ified, the type checker complains about
OPENSSL_timeval. Existing callers all use the real timeval.
Now that OPENSSL_timeval is not included in any public structs, simply
forward-declare timeval itself in ssl.h and pull in winsock2.h in internal
headers.
Change-Id: Ieaf110e141578488048c28cdadb14881301a2ce1
Reviewed-on: https://boringssl-review.googlesource.com/4682
Reviewed-by: Adam Langley <agl@google.com>
Nothing ever uses those structs. This to avoid having any structs in the
public header which use struct timeval.
In doing so, move the protocol version constants up to ssl.h so dtls1.h
may be empty. This also removes TLS1_get_version and TLS1_get_client_version
as they're unused and depend on TLS1_VERSION_MAJOR. This still lets tls1.h
be included independently from ssl.h (though I don't think anyone ever includes
it...).
Change-Id: Ieac8b90cf94f7f1e742a88bb75c0ee0aa4b1414c
Reviewed-on: https://boringssl-review.googlesource.com/4681
Reviewed-by: Adam Langley <agl@google.com>
With SSL_get0_raw_cipherlist gone, there's no need to hold onto it.
Change-Id: I258f8bfe21cc354211a777660df680df6c49df2a
Reviewed-on: https://boringssl-review.googlesource.com/4616
Reviewed-by: Adam Langley <agl@google.com>
The only place using it is export keying material which can do the
version check inline.
Change-Id: I1893966c130aa43fa97a6116d91bb8b04f80c6fb
Reviewed-on: https://boringssl-review.googlesource.com/4615
Reviewed-by: Adam Langley <agl@google.com>
clang-format got a little confused there.
Change-Id: I46df523e8a7813a2b4e243da3df22851b3393873
Reviewed-on: https://boringssl-review.googlesource.com/4614
Reviewed-by: Adam Langley <agl@google.com>
Document them while I'm here. This adds a new 'preprocessor
compatibility section' to avoid breaking #ifdefs. The CTRL values
themselves are defined to 'doesnt_exist' to catch anything calling
SSL_ctrl directly until that function can be unexported completely.
BUG=404754
Change-Id: Ia157490ea8efe0215d4079556a0c7643273e7601
Reviewed-on: https://boringssl-review.googlesource.com/4553
Reviewed-by: Adam Langley <agl@google.com>
These are never used and no flags are defined anyway.
Change-Id: I206dc2838c5f68d87559a702dcb299b208cc7e1e
Reviewed-on: https://boringssl-review.googlesource.com/4493
Reviewed-by: Adam Langley <agl@google.com>
This is a really dumb API wart. Now that we have a limited set of curves that
are all reasonable, the automatic logic should just always kick in. This makes
set_ecdh_auto a no-op and, instead of making it the first choice, uses it as
the fallback behavior should none of the older curve selection APIs be used.
Currently, by default, server sockets can only use the plain RSA key exchange.
BUG=481139
Change-Id: Iaabc82de766cd00968844a71aaac29bd59841cd4
Reviewed-on: https://boringssl-review.googlesource.com/4531
Reviewed-by: Adam Langley <agl@google.com>
Just about everything depends on SSL_CIPHER. Move it to the top as the first
section in ssl.h. Match the header order and the source file order and document
everything. Also make a couple of minor style guide tweaks.
Change-Id: I6a810dbe79238278ac480e5ced1447055715a79f
Reviewed-on: https://boringssl-review.googlesource.com/4290
Reviewed-by: Adam Langley <agl@google.com>
Rather than shoehorn real ciphers and cipher aliases into the same type (that's
what cipher->valid is used for), treat them separately. Make
ssl_cipher_apply_rule match ciphers by cipher_id (the parameter was ignored and
we assumed that masks uniquely identify a cipher) and remove the special cases
around zero for all the masks. This requires us to remember which fields
default to 0 and which default to ~0u, but the logic is much clearer.
Finally, now that ciphers and cipher aliases are different, don't process rules
which sum together an actual cipher with cipher aliases. This would AND
together the masks for the alias with the values in the cipher and do something
weird around alg_ssl. (alg_ssl is just weird in general, as everyone trying to
disable SSLv3 in OpenSSL recently discovered.)
With all that, we can finally remove cipher->valid which was always one.
Change-Id: Iefcfe159bd6c22dbaea3a5f1517bd82f756dcfe1
Reviewed-on: https://boringssl-review.googlesource.com/4284
Reviewed-by: Adam Langley <agl@google.com>
These are all masks of some sort (except id which is a combined version and
cipher), so they should use fixed-size unsigned integers.
Change-Id: I058dd8ad231ee747df4b4fb17d9c1e2cbee21918
Reviewed-on: https://boringssl-review.googlesource.com/4283
Reviewed-by: Adam Langley <agl@google.com>
The rest of ssl/ still includes things everywhere, but this at least fixes the
includes that were implicit from ssl/internal.h.
Change-Id: I7ed22590aca0fe78af84fd99a3e557f4b05f6782
Reviewed-on: https://boringssl-review.googlesource.com/4281
Reviewed-by: Adam Langley <agl@google.com>
Match the other internal headers.
Change-Id: Iff7e2dd06a1a7bf993053d0464cc15638ace3aaa
Reviewed-on: https://boringssl-review.googlesource.com/4280
Reviewed-by: Adam Langley <agl@google.com>
