This moves the early data switch to CERT to make this
|SSL_set_SSL_CTX|-proof.
Change-Id: Icca96e76636d87578deb24b2d507cabee7e46a4a
Reviewed-on: https://boringssl-review.googlesource.com/14545
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Channel ID is incompatible with 0-RTT, so we gracefully decline 0-RTT
as a server and forbid their combination as a client. We'll keep this
logic around until Channel ID is removed.
Channel ID will be replaced by tokbind which currently uses custom
extensions. Those will need additional logic to work with 0-RTT.
This is not implemented yet so, for now, fail if both are ever
configured together at all. A later change will allow the two to
combine.
BUG=183
Change-Id: I46c5ba883ccd47930349691fb08074a1fab13d5f
Reviewed-on: https://boringssl-review.googlesource.com/14370
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Once 0-RTT data is added to the current 0-RTT logic, the server will
trigger a write when processing incoming data via SSL_read. This means
SSL_read will block on transport write, which is something we've not
tried to avoid far (assuming no renegotiation).
The specification allows for tickets to be sent at half-RTT by
predicting the client Finished. By doing this we both get the tickets on
the wire sooner and avoid confusing I/O patterns. Moreover, we
anticipate we will need this mode for one of the QUIC stateless reject
patterns.
This is tested by always processing NewSessionTickets in the
ExpectHalfRTTData path on 0-RTT connections. As not other
implementations using BoGo may not do this, this is configurable via the
shim config.
BUG=76
Change-Id: Ia0f56ae63f15078ff1cacceba972d2b99001947f
Reviewed-on: https://boringssl-review.googlesource.com/14371
Reviewed-by: Steven Valdez <svaldez@chromium.org>
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: Steven Valdez <svaldez@chromium.org>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This adds support on the server and client to accept data-less early
data. The server will still fail to parse early data with any
contents, so this should remain disabled.
BUG=76
Change-Id: Id85d192d8e0360b8de4b6971511b5e8a0e8012f7
Reviewed-on: https://boringssl-review.googlesource.com/12921
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This makes its purpose clearer. That the session cache is based on the
initial SSL_CTX is confusing (it's a remnant of OpenSSL's backwards
session resumption ordering), but we're probably stuck with it.
Relatedly, document SSL_set_SSL_CTX better.
Change-Id: I2832efc63f6c959c5424271b365825afc7eec5e4
Reviewed-on: https://boringssl-review.googlesource.com/14204
Commit-Queue: David Benjamin <davidben@google.com>
Reviewed-by: Adam Langley <agl@google.com>
There are still a few x509.h includes outside ssl_x509.c and ssl_file.c
due to referencing X509_V_* values, but otherwise these includes are no
longer needed.
Change-Id: Ide458e01358dc2ddb6838277d074ad249e599040
Reviewed-on: https://boringssl-review.googlesource.com/14026
Reviewed-by: Adam Langley <agl@google.com>
Due to middlebox and ecosystem intolerance, short record headers are going to
be unsustainable to deploy.
BUG=119
Change-Id: I20fee79dd85bff229eafc6aeb72e4f33cac96d82
Reviewed-on: https://boringssl-review.googlesource.com/14044
Reviewed-by: Steven Valdez <svaldez@google.com>
Commit-Queue: Steven Valdez <svaldez@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This is the first part to fixing the SSL stack to be 2038-clean.
Internal structures and functions are switched to use OPENSSL_timeval
which, unlike timeval and long, are suitable for timestamps on all
platforms.
It is generally accepted that the year is now sometime after 1970, so
use uint64_t for the timestamps to avoid worrying about serializing
negative numbers in SSL_SESSION.
A follow-up change will fix SSL_CTX_set_current_time_cb to use
OPENSSL_timeval. This will require some coordinating with WebRTC.
DTLSv1_get_timeout is left alone for compatibility and because it stores
time remaining rather than an absolute time.
BUG=155
Change-Id: I1a5054813300874b6f29e348f9cd8ca80f6b9729
Reviewed-on: https://boringssl-review.googlesource.com/13944
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This change converts the CA names that are parsed from a server's
CertificateRequest, as well as the CA names that are configured for
sending to clients in the same, to use |CRYPTO_BUFFER|.
The |X509_NAME|-based interfaces are turned into compatibility wrappers.
Change-Id: I95304ecc988ee39320499739a0866c7f8ff5ed98
Reviewed-on: https://boringssl-review.googlesource.com/13585
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This lets us trim another two pointers of per-connection state.
Change-Id: I2145d529bc25b7e24a921d01e82ee99f2c98867c
Reviewed-on: https://boringssl-review.googlesource.com/13804
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
0-RTT requires matching the selected ALPN parameters against those in
the session. Stash the ALPN value in the session in TLS 1.3, so we can
recover it.
BUG=76
Change-Id: I8668b287651ae4deb0bf540c0885a02d189adee0
Reviewed-on: https://boringssl-review.googlesource.com/13845
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
|SSL_SESSION_from_bytes| now takes an |SSL_CTX*|, from which it uses the
|X509_METHOD| and buffer pool. This is our API so we can do this.
This also requires adding an |SSL_CTX*| argument to |SSL_SESSION_new|
for the same reason. However, |SSL_SESSION_new| already has very few
callers (and none in third-party code that I can see) so I think we can
get away with this.
Change-Id: I1337cd2bd8cff03d4b9405ea3146b3b59584aa72
Reviewed-on: https://boringssl-review.googlesource.com/13584
Reviewed-by: Adam Langley <alangley@gmail.com>
Commit-Queue: Adam Langley <alangley@gmail.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Change-Id: I98903df561bbf8c5739f892d2ad5e89ac0eb8e6f
Reviewed-on: https://boringssl-review.googlesource.com/13369
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
We already have some cases where the default is DECODE_ERROR and, rather
than have two defaults, just harmonise on that. (INTERNAL_ERROR might
make more sense in some cases, but we don't want to have to remember
what the default is in each case and nobody really cares what the actual
value is anyway.)
Change-Id: I28007898e8d6e7415219145eb9f43ea875028ab2
Reviewed-on: https://boringssl-review.googlesource.com/13720
Reviewed-by: Adam Langley <agl@google.com>
As previously discussed, it turns out we don't actually need this, so
there's no point in keeping it.
Change-Id: If549c917b6bd818cd36948e37cb7839c8d122b1a
Reviewed-on: https://boringssl-review.googlesource.com/13641
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
In TLS 1.2, resumption's benefits are more-or-less subsumed by False
Start. TLS 1.2 resumption lifetime is bounded by how much traffic we are
willing to encrypt without fresh key material, so the lifetime is short.
Renewal uses the same key, so we do not allow it to increase lifetimes.
In TLS 1.3, resumption unlocks 0-RTT. We do not implement psk_ke, so
resumption incorporates fresh key material into both encrypted traffic
(except for early data) and renewed tickets. Thus we are both more
willing to and more interested in longer lifetimes for tickets. Renewal
is also not useless. Thus in TLS 1.3, lifetime is bound separately by
the lifetime of a given secret as a psk_dhe_ke authenticator and the
lifetime of the online signature which authenticated the initial
handshake.
This change maintains two lifetimes on an SSL_SESSION: timeout which is
the renewable lifetime of this ticket, and auth_timeout which is the
non-renewable cliff. It also separates the TLS 1.2 and TLS 1.3 timeouts.
The old session timeout defaults and configuration apply to TLS 1.3, and
we define new ones for TLS 1.3.
Finally, this makes us honor the NewSessionTicket timeout in TLS 1.3.
It's no longer a "hint" in 1.3 and there's probably value in avoiding
known-useless 0-RTT offers.
BUG=120
Change-Id: Iac46d56e5a6a377d8b88b8fa31f492d534cb1b85
Reviewed-on: https://boringssl-review.googlesource.com/13503
Reviewed-by: Adam Langley <agl@google.com>
Move to explicit hashing everywhere, matching TLS 1.2 with TLS 1.3. The
ssl_get_message calls between all the handshake states are now all
uniform so, when we're ready, we can rewire the TLS 1.2 state machine to
look like the TLS 1.3 one. (ssl_get_message calls become an
ssl_hs_read_message transition, reuse_message becomes an ssl_hs_ok
transition.)
This avoids some nuisance in processing the ServerHello at the 1.2 / 1.3
transition.
The downside of explicit hashing is we may forget to hash something, but
this will fail to interop with our tests and anyone else, so we should
be able to catch it.
BUG=128
Change-Id: I01393943b14dfaa98eec2a78f62c3a41c29b3a0e
Reviewed-on: https://boringssl-review.googlesource.com/13266
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This aligns the TLS 1.2 state machine closer with the TLS 1.3 state
machine. This is more work for the handshake, but ultimately the
plan is to take the ssl_get_message call out of the handshake (so it is
just the state machine rather than calling into BIO), so the parameters
need to be folded out as in TLS 1.3.
The WrongMessageType-* family of tests should make sure we don't miss
one of these.
BUG=128
Change-Id: I17a1e6177c52a7540b2bc6b0b3f926ab386c4950
Reviewed-on: https://boringssl-review.googlesource.com/13264
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Until we've gotten it fully working, we should not mint any of these
SSL_SESSIONs, to avoid constraining future versions of our client code.
Notably, if any of our TLS 1.3 clients today serialized sessions, we
would need to rev the serialization format. Without opting into 0-RTT, a
TLS 1.3 client will create SSL_SESSIONs tagged as 0-RTT-capable but
missing important fields (ALPN, etc.). When that serialized session
makes its way to a future version of our client code, it would disagree
with the server about the ALPN value stored in the ticket and cause
interop failures.
I believe the only client code enabling TLS 1.3 right now is Chrome, and
the window is small, so it should be fine. But fix this now before it
becomes a problem.
Change-Id: Ie2b109f8d158017a6f3b4cb6169050d38a66b31c
Reviewed-on: https://boringssl-review.googlesource.com/13342
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
The SSL code suffers from needing too many verbs for variations on
writing things without actually writing them. We used to have queuing
the message up to be written to the buffer BIO, writing to the buffer
BIO, and flushing the buffer BIO. (Reading, conversely, has a similar
mess of verbs.)
Now we just have adding to the pending flight and flushing the pending
flight, match the SSL_PROTOCOL_METHOD naming.
BUG=72
Change-Id: I332966928bf13f03dfb8eddd519c2fefdd7f24d4
Reviewed-on: https://boringssl-review.googlesource.com/13227
Reviewed-by: Adam Langley <agl@google.com>
Large chunks of contiguous messages can now be sent in a row. Notably,
the ServerHello flight involves a number of optional messages which can
now be collapsed into straight-line code.
BUG=72
Change-Id: I1429d22a12401aa0f811a04e495bd5d754c084a4
Reviewed-on: https://boringssl-review.googlesource.com/13226
Reviewed-by: Adam Langley <agl@google.com>
On the TLS side, we introduce a running buffer of ciphertext. Queuing up
pending data consists of encrypting the record into the buffer. This
effectively reimplements what the buffer BIO was doing previously, but
this resizes to fit the whole flight.
As part of this, rename all the functions to add to the pending flight
to be more uniform. This CL proposes "add_foo" to add to the pending
flight and "flush_flight" to drain it.
We add an add_alert hook for alerts but, for now, only the SSL 3.0
warning alert (sent mid-handshake) uses this mechanism. Later work will
push this down to the rest of the write path so closure alerts use it
too, as in DTLS. The intended end state is that all the ssl_buffer.c and
wpend_ret logic will only be used for application data and eventually
optionally replaced by the in-place API, while all "incidental" data
will be handled internally.
For now, the two buffers are mutually exclusive. Moving closure alerts
to "incidentals" will change this, but flushing application data early
is tricky due to wpend_ret. (If we call ssl_write_buffer_flush,
do_ssl3_write doesn't realize it still has a wpend_ret to replay.) That
too is all left alone in this change.
To keep the diff down, write_message is retained for now and will be
removed from the state machines in a follow-up change.
BUG=72
Change-Id: Ibce882f5f7196880648f25d5005322ca4055c71d
Reviewed-on: https://boringssl-review.googlesource.com/13224
Reviewed-by: Adam Langley <agl@google.com>
08b65f4e31 introduced a memory leak and
also got enums confused. Also fix a codepath that was missing an error
code.
Thanks to OSS-Fuzz which appears to have found it in a matter of hours.
Change-Id: Ia9e926c28a01daab3e6154d363d0acda91209a22
Reviewed-on: https://boringssl-review.googlesource.com/13104
Commit-Queue: David Benjamin <davidben@google.com>
Reviewed-by: Adam Langley <agl@google.com>
This adds support for setting 0-RTT mode on tickets minted by
BoringSSL, allowing for testing of the initial handshake knowledge.
BUG=76
Change-Id: Ic199842c03b5401ef122a537fdb7ed9e9a5c635a
Reviewed-on: https://boringssl-review.googlesource.com/12740
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Rather than doing it right before outputing, treat this as a part of the
pipeline to finalize the certificate chain, and run it right after
cert_cb to modify the certificate configuration itself. This means
nothing else in the stack needs to worry about this case existing.
It also makes it easy to support in both TLS 1.2 and TLS 1.3.
Change-Id: I6a088297a54449f1f5f5bb8b5385caa4e8665eb6
Reviewed-on: https://boringssl-review.googlesource.com/12966
Reviewed-by: Adam Langley <agl@google.com>
This extension will be used to test whether
https://github.com/tlswg/tls13-spec/pull/762 is deployable against
middleboxes. For simplicity, it is mutually exclusive with 0-RTT. If
client and server agree on the extension, TLS 1.3 records will use the
format in the PR rather than what is in draft 18.
BUG=119
Change-Id: I1372ddf7b328ddf73d496df54ac03a95ede961e1
Reviewed-on: https://boringssl-review.googlesource.com/12684
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Most C standard library functions are undefined if passed NULL, even
when the corresponding length is zero. This gives them (and, in turn,
all functions which call them) surprising behavior on empty arrays.
Some compilers will miscompile code due to this rule. See also
https://www.imperialviolet.org/2016/06/26/nonnull.html
Add OPENSSL_memcpy, etc., wrappers which avoid this problem.
BUG=23
Change-Id: I95f42b23e92945af0e681264fffaf578e7f8465e
Reviewed-on: https://boringssl-review.googlesource.com/12928
Commit-Queue: David Benjamin <davidben@google.com>
Reviewed-by: Adam Langley <agl@google.com>
This is in preparation for implementing 0-RTT where, like
with client_traffic_secret_0, client_handshake_secret must
be derived slightly earlier than it is used. (The secret is
derived at ServerHello, but used at server Finished.)
Change-Id: I6a186b84829800704a62fda412992ac730422110
Reviewed-on: https://boringssl-review.googlesource.com/12920
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Also fix the error code. It's a missing extension, not an unexpected
one.
Change-Id: I48e48c37e27173f6d7ac5e993779948ead3706f2
Reviewed-on: https://boringssl-review.googlesource.com/12683
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This avoids needing a extra state around client certificates to avoid
calling the callbacks twice. This does, however, come with a behavior
change: configuring both callbacks won't work. No consumer does this.
(Except bssl_shim which needed slight tweaks.)
Change-Id: Ia5426ed2620e40eecdcf352216c4a46764e31a9a
Reviewed-on: https://boringssl-review.googlesource.com/12690
Reviewed-by: Adam Langley <agl@google.com>
This is to free up the hs->state name for the upper-level handshake
state.
Change-Id: I1183a329f698c56911f3879a91809edad5b5e94e
Reviewed-on: https://boringssl-review.googlesource.com/12695
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
The remaining direct accesses are in functions which expect to be called
in and out of the handshake. Accordingly, they are NULL-checked.
Change-Id: I07a7de6bdca7b6f8d09e22da11b8863ebf41389a
Reviewed-on: https://boringssl-review.googlesource.com/12343
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Change-Id: I84a8ff1d717f3291403f6fc49668c84f89b910da
Reviewed-on: https://boringssl-review.googlesource.com/12342
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This removes all explicit ssl->s3->hs access in those files.
Change-Id: I801ca1c894936aecef21e56ec7e7acb9d1b99688
Reviewed-on: https://boringssl-review.googlesource.com/12318
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This takes care of many of the explicit ssl->s3->hs accesses.
Change-Id: I380fae959f3a7021d6de9d19a4ca451b9a0aefe5
Reviewed-on: https://boringssl-review.googlesource.com/12317
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This cuts down on a lot of unchecked ssl->s3->hs accesses. Next is
probably the mass of extensions callbacks, and then we can play
whack-a-mole with git grep.
Change-Id: I81c506ea25c2569a51ceda903853465b8b567b0f
Reviewed-on: https://boringssl-review.googlesource.com/12237
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
There is no more derivation step. We just use the resumption secret
directly. This saves us an unnecessary memcpy.
Change-Id: I203bdcc0463780c47cce655046aa1be560bb5b18
Reviewed-on: https://boringssl-review.googlesource.com/12472
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
As a client, we must tolerate this to avoid interoperability failures
with allowed server behaviors.
BUG=117
Change-Id: I9c40a2a048282e2e63ab5ee1d40773fc2eda110a
Reviewed-on: https://boringssl-review.googlesource.com/12311
Reviewed-by: David Benjamin <davidben@google.com>
This is a no-op because all affected codepaths are either unreachable or
are fine because ssl_hs_error (intentionally, since C doesn't help us
any) aligns with zero. Still, fix these.
Change-Id: Ieba4e3eec3881a56b5ddcd32abdd2c9dda875eda
Reviewed-on: https://boringssl-review.googlesource.com/12313
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Reviewed-by: Steven Valdez <svaldez@chromium.org>
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
TLS 1.3 adds a number of places with extensions blocks that don't easily
fit into our ClientHello/EncryptedExtensions callbacks. Between
HelloRetryRequest, ServerHello, draft 18 going nuts with Certificate,
and NewSessionTicket when we do 0-RTT, this passes the "abstract things
that are repeated three times" sniff test.
For now, it rejects unknown extensions, but it will probably grow an
allow_unknown parameter for NewSessionTicket.
This involves disabling some MSVC warnings, but they're invalid as of
C99 which we otherwise require. See
https://connect.microsoft.com/VisualStudio/feedback/details/1230248/remove-c99-related-warnings-or-make-them-off-by-default
Change-Id: Iea8bf8ab216270c081dd63e79aaad9ec73b3b550
Reviewed-on: https://boringssl-review.googlesource.com/12233
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
For TLS 1.3 draft 18, it will be useful to get at the full current
message and not just the body. Add a hook to expose it and replace
hash_current_message with a wrapper over it.
BUG=112
Change-Id: Ib9e00dd1b78e8b72e12409d85c80e96c5b411a8b
Reviewed-on: https://boringssl-review.googlesource.com/12238
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This is to allow for PSK binders to be munged into the ClientHello as part of
draft 18.
BUG=112
Change-Id: Ic4fd3b70fa45669389b6aaf55e61d5839f296748
Reviewed-on: https://boringssl-review.googlesource.com/12228
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
The distinction for full handshakes is not meaningful (the timestamp is
currently the start of the handshake), but for renewed sessions, we
currently retain the timestamp of the original issuance.
Instead, when minting or receiving tickets, adjust session->time and
session->timeout so that session->time is the ticket issuance time.
This is still not our final TLS 1.3 behavior (which will need a both
renewable and non-renewable times to honor the server ticket lifetime),
but it gets us closer and unblocks handling ticket_age_add from TLS 1.3
draft 18 and sends the correct NewSessionTicket lifetime.
This fixes the ticket lifetime hint which we emit on the server to
mirror the true ticket lifetime. It also fixes the TLS 1.3 server code
to not set the ticket lifetime hint. There is no need to waste ticket
size with it, it is no longer a "hint" in TLS 1.3, and even in the TLS
1.3 code we didn't fill it in on the server.
Change-Id: I140541f1005a24e53e1b1eaa90996d6dada1c3a1
Reviewed-on: https://boringssl-review.googlesource.com/12105
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
TLS 1.3 ciphers are now always enabled and come with a hard-coded
preference order.
BUG=110
Change-Id: Idd9cb0d75fb6bf2676ecdee27d88893ff974c4a3
Reviewed-on: https://boringssl-review.googlesource.com/12025
Reviewed-by: Adam Langley <agl@google.com>
Channel ID for TLS 1.3 uses the same digest construction as
CertificateVerify. This message is signed with the Channel ID key and
put in the same handshake message (with the same format) as in TLS 1.2.
BUG=103
Change-Id: Ia5b2dffe5a39c39db0cecb0aa6bdc328e53accc2
Reviewed-on: https://boringssl-review.googlesource.com/11420
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
We'll never send cookies, but we'll echo them on request. Implement it
in runner as well and test.
BUG=98
Change-Id: Idd3799f1eaccd52ac42f5e2e5ae07c209318c270
Reviewed-on: https://boringssl-review.googlesource.com/11565
Commit-Queue: David Benjamin <davidben@google.com>
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
