This change converts the |CERT| struct to holding certificates as binary
blobs, rather than in parsed form. The members for holding the parsed
form are still there, however, but are only used as a cache for the
event that someone asks us for a non-owning pointer to the parsed leaf
or chain.
Next steps:
* Move more functions in to ssl_x509.c
* Create an X509_OPS struct of function pointers that will hang off
the |SSL_METHOD| to abstract out the current calls to crypto/x509
operations.
BUG=chromium:671420
Change-Id: Ifa05d88c49a987fd561b349705c9c48f106ec868
Reviewed-on: https://boringssl-review.googlesource.com/13280
Reviewed-by: Adam Langley <agl@google.com>
On the TLS side, we introduce a running buffer of ciphertext. Queuing up
pending data consists of encrypting the record into the buffer. This
effectively reimplements what the buffer BIO was doing previously, but
this resizes to fit the whole flight.
As part of this, rename all the functions to add to the pending flight
to be more uniform. This CL proposes "add_foo" to add to the pending
flight and "flush_flight" to drain it.
We add an add_alert hook for alerts but, for now, only the SSL 3.0
warning alert (sent mid-handshake) uses this mechanism. Later work will
push this down to the rest of the write path so closure alerts use it
too, as in DTLS. The intended end state is that all the ssl_buffer.c and
wpend_ret logic will only be used for application data and eventually
optionally replaced by the in-place API, while all "incidental" data
will be handled internally.
For now, the two buffers are mutually exclusive. Moving closure alerts
to "incidentals" will change this, but flushing application data early
is tricky due to wpend_ret. (If we call ssl_write_buffer_flush,
do_ssl3_write doesn't realize it still has a wpend_ret to replay.) That
too is all left alone in this change.
To keep the diff down, write_message is retained for now and will be
removed from the state machines in a follow-up change.
BUG=72
Change-Id: Ibce882f5f7196880648f25d5005322ca4055c71d
Reviewed-on: https://boringssl-review.googlesource.com/13224
Reviewed-by: Adam Langley <agl@google.com>
Instead, "writing" a message merely adds it to the outgoing_messages
structure. The code to write the flight then loops over it all and now
shares code with retransmission. The verbs here are all a little odd,
but they'll be fixed in later commits.
In doing so, this fixes a slight miscalculation of the record-layer
overhead when retransmitting a flight that spans two epochs. (We'd use
the encrypted epoch's overhead for the unencrypted epoch.)
BUG=72
Change-Id: I8ac897c955cc74799f8b5ca6923906e97d6dad17
Reviewed-on: https://boringssl-review.googlesource.com/13223
Reviewed-by: Adam Langley <agl@google.com>
This was replaced by the more general CLIENT_RANDOM scheme that records
the master secret. Support was added in Wireshark 1.8.0, released in
June 2012. At this point, ECDHE is sufficiently widely deployed that
anyone that cares about this feature must have upgraded their Wireshark
by now.
Change-Id: I9b708f245ec8728c1999daf91aca663be7d25661
Reviewed-on: https://boringssl-review.googlesource.com/13263
Reviewed-by: David Benjamin <davidben@google.com>
Eventually, all uses of crypto/x509 will be from ssl_x509.c, but this is
just a start.
Change-Id: I2f38cdcbf18b1f26add0aac10a70af10a79dee0e
Reviewed-on: https://boringssl-review.googlesource.com/13242
Reviewed-by: Adam Langley <agl@google.com>
We have a test somewhere which tries to read off of it. Align the getter
roughly with upstream's SSL_SESSION_get0_id_context (which we don't
currently expose).
BUG=6
Change-Id: Iab240868838ba56c1f08d112888d9536574347b4
Reviewed-on: https://boringssl-review.googlesource.com/12636
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
TLS 1.3 doesn't support renegotiation in the first place, but so callers
don't report TLS 1.3 servers as missing it, always report it as
(vacuously) protected against this bug.
BUG=chromium:680281
Change-Id: Ibfec03102b2aec7eaa773c331d6844292e7bb685
Reviewed-on: https://boringssl-review.googlesource.com/13046
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This adds support for setting 0-RTT mode on tickets minted by
BoringSSL, allowing for testing of the initial handshake knowledge.
BUG=76
Change-Id: Ic199842c03b5401ef122a537fdb7ed9e9a5c635a
Reviewed-on: https://boringssl-review.googlesource.com/12740
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
We repeat this in a bunch of places.
Change-Id: Iee2c95a13e1645453f101d8be4be9ac78d520387
Reviewed-on: https://boringssl-review.googlesource.com/13051
Reviewed-by: David Benjamin <davidben@google.com>
We have this function now. Probably good to use it.
Change-Id: I00fe1f4cf5c8cb6f61a8f6600cac4667e95ad7f3
Reviewed-on: https://boringssl-review.googlesource.com/13040
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This extension will be used to test whether
https://github.com/tlswg/tls13-spec/pull/762 is deployable against
middleboxes. For simplicity, it is mutually exclusive with 0-RTT. If
client and server agree on the extension, TLS 1.3 records will use the
format in the PR rather than what is in draft 18.
BUG=119
Change-Id: I1372ddf7b328ddf73d496df54ac03a95ede961e1
Reviewed-on: https://boringssl-review.googlesource.com/12684
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Most C standard library functions are undefined if passed NULL, even
when the corresponding length is zero. This gives them (and, in turn,
all functions which call them) surprising behavior on empty arrays.
Some compilers will miscompile code due to this rule. See also
https://www.imperialviolet.org/2016/06/26/nonnull.html
Add OPENSSL_memcpy, etc., wrappers which avoid this problem.
BUG=23
Change-Id: I95f42b23e92945af0e681264fffaf578e7f8465e
Reviewed-on: https://boringssl-review.googlesource.com/12928
Commit-Queue: David Benjamin <davidben@google.com>
Reviewed-by: Adam Langley <agl@google.com>
There are no longer any consumers of these APIs.
These were useful back when the CBC vs. RC4 tradeoff varied by version
and it was worth carefully tuning this cutoff. Nowadays RC4 is
completely gone and there's no use in configuring these anymore.
To avoid invalidating the existing ssl_ctx_api corpus and requiring it
regenerated, I've left the entries in there. It's probably reasonable
for new API fuzzers to reuse those slots.
Change-Id: I02bf950e3828062341e4e45c8871a44597ae93d5
Reviewed-on: https://boringssl-review.googlesource.com/12880
Commit-Queue: David Benjamin <davidben@google.com>
Reviewed-by: Adam Langley <agl@google.com>
This function always returns the full chain and will hopefully eliminate
the need for some code in Conscrypt.
Change-Id: Ib662005322c40824edf09d100a784ff00492896a
Reviewed-on: https://boringssl-review.googlesource.com/12780
Reviewed-by: Adam Langley <agl@google.com>
So we can report it cleanly out of DevTools, it should behave like
SSL_get_curve_id and be reported on resumption too.
BUG=chromium:658905
Change-Id: I0402e540a1e722e09eaebadf7fb4785d8880c389
Reviewed-on: https://boringssl-review.googlesource.com/12694
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
The only accessor for this field is the group/curve ID. Switch to only
storing that so no cipher checks are needed to interpret it. Instead,
ignore older values at parse time.
Change-Id: Id0946d4ac9e7482c69e64cc368a9d0cddf328bd3
Reviewed-on: https://boringssl-review.googlesource.com/12693
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Nothing calls this anymore. DHE is nearly gone. This unblocks us from
making key_exchange_info only apply to the curve.
Change-Id: I3099e7222a62441df6e01411767d48166a0729b1
Reviewed-on: https://boringssl-review.googlesource.com/12691
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This currently only works for certificates parsed from the network, but
if making several connections that share certificates, some KB of memory
might be saved.
BUG=chromium:671420
Change-Id: I1c7a71d84e1976138641f71830aafff87f795f9d
Reviewed-on: https://boringssl-review.googlesource.com/12706
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
OpenSSL includes a leaf certificate in a certificate chain when it's a
client, but doesn't when it's a server. This is also reflected in the
serialisation of sessions.
This change makes the internal semantics consistent: the leaf is always
included in the chain in memory, and never duplicated when serialised.
To maintain the same API, SSL_get_peer_cert_chain will construct a copy
of the chain without the leaf if needed.
Since the serialised format of a client session has changed, an
|is_server| boolean is added to the ASN.1 that defaults to true. Thus
any old client sessions will be parsed as server sessions and (silently)
discarded by a client.
Change-Id: Ibcf72bc8a130cedb423bc0fd3417868e0af3ca3e
Reviewed-on: https://boringssl-review.googlesource.com/12704
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
state is now initialized to SSL_ST_INIT in SSL_HANDSHAKE. If there is no
handshake present, we report SSL_ST_OK. This saves 8 bytes of
per-connection post-handshake memory.
Change-Id: Idb3f7031045caed005bd7712bc8c4b42c81a1d04
Reviewed-on: https://boringssl-review.googlesource.com/12697
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This is to free up moving ssl->state into SSL_HANDSHAKE. ssl->state
serves two purposes right now. First, it is the state tracking for
SSL_HANDSHAKE. Second, it lets the system know there is a handshake
waiting to complete.
Instead, arrange things so that, if there is a handshake waiting to
complete, hs is not NULL. That means we need to initialize it when
creating a new connection and when discovering a renego.
Note this means we cannot make initializing an SSL_HANDSHAKE depend on
client vs. server.
Change-Id: I585a8d7e700c4ffe4d372248d34c44106ad7e7a0
Reviewed-on: https://boringssl-review.googlesource.com/12696
Reviewed-by: David Benjamin <davidben@google.com>
Reduce the amount of boilerplate needed to add more of these. Also tidy
things up a little.
Change-Id: I90ea7f70dba5a2b38a1fb716faff97eb4f6afafc
Reviewed-on: https://boringssl-review.googlesource.com/12687
Commit-Queue: David Benjamin <davidben@google.com>
Reviewed-by: Adam Langley <agl@google.com>
This reverts commits 5a6e616961 and
e8509090cf. I'm going to unify how the
chains are kept in memory between client and server first otherwise the
mess just keeps growing.
Change-Id: I76df0d94c9053b2454821d22a3c97951b6419831
Reviewed-on: https://boringssl-review.googlesource.com/12701
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Change-Id: Ie947ab176d10feb709c6e135d5241c6cf605b8e8
Reviewed-on: https://boringssl-review.googlesource.com/12700
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This currently only works for certificates parsed from the network, but
if making several connections that share certificates, some KB of memory
might be saved.
Change-Id: I0ea4589d7a8b5c41df225ad7f282b6d1376a8db4
Reviewed-on: https://boringssl-review.googlesource.com/12164
Reviewed-by: Adam Langley <alangley@gmail.com>
Right now the only way to set an OCSP response is SSL_CTX_set_ocsp_response
however this assumes that all the SSLs generated from a SSL_CTX share the
same OCSP response, which is wrong.
This is similar to the OpenSSL "function" SSL_get_tlsext_status_ocsp_resp,
the main difference being that this doesn't take ownership of the OCSP buffer.
In order to avoid memory duplication in case SSL_CTX has its own response,
a CRYPTO_BUFFER is used for both SSL_CTX and SSL.
Change-Id: I3a0697f82b805ac42a22be9b6bb596aa0b530025
Reviewed-on: https://boringssl-review.googlesource.com/12660
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
All callers were long since updated.
Change-Id: Ibdc9b186076dfbcbc3bd7dcc72610c8d5a522cfc
Reviewed-on: https://boringssl-review.googlesource.com/12624
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Prior to 87eab4902d, due to some
confusions between configuration and connection state, SSL_clear had the
side effect of offering the previously established session on the new
connection.
wpa_supplicant relies on this behavior, so restore it for TLS 1.2 and
below and add a test. (This behavior is largely incompatible with TLS
1.3's post-handshake tickets, so it won't work in 1.3. It'll act as if
we configured an unresumable session instead.)
Change-Id: Iaee8c0afc1cb65c0ab7397435602732b901b1c2d
Reviewed-on: https://boringssl-review.googlesource.com/12632
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
size_t at the public API, uint8_t on the SSL structs since everything
fits in there comfortably.
Change-Id: I837c3b21e04e03dfb957c1a3e6770300d0b49c0b
Reviewed-on: https://boringssl-review.googlesource.com/12638
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
It is impossible to have an SSL* without a corresponding method.
Change-Id: Icaf826a06aaaa2c7caf98b1e4a950f9c1d48e6bd
Reviewed-on: https://boringssl-review.googlesource.com/12621
Reviewed-by: Adam Langley <agl@google.com>
There is no need to retain it beyond this point.
Change-Id: Ib5722ab30fc013380198b1582d1240f0fe0aa770
Reviewed-on: https://boringssl-review.googlesource.com/12620
Reviewed-by: Adam Langley <agl@google.com>
These too have no reason to be called across files.
Change-Id: Iee477e71f956c2fa0d8817bf2777cb3a81e1c853
Reviewed-on: https://boringssl-review.googlesource.com/12585
Reviewed-by: Adam Langley <agl@google.com>
This allows a consumer to disable Channel ID (for instance, it may be
enabled on the SSL_CTX and later disabled on the SSL) without reaching
into the SSL struct directly.
Deprecate the old APIs in favor of these.
BUG=6
Change-Id: I193bf94bc1f537e1a81602a39fc2b9a73f44c73b
Reviewed-on: https://boringssl-review.googlesource.com/12623
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Each of these functions is called only once, but they're interspersed
between s3_lib.c and ssl_lib.c.
Change-Id: Ic496e364b091fc8e01fc0653fe73c83c47f690d9
Reviewed-on: https://boringssl-review.googlesource.com/12583
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
It's our ClientHello representation. May as well name it accordingly.
Also switch away from calling the variable name ctx as that conflicts
with SSL_CTX.
Change-Id: Iec0e597af37137270339e9754c6e08116198899e
Reviewed-on: https://boringssl-review.googlesource.com/12581
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
The remaining direct accesses are in functions which expect to be called
in and out of the handshake. Accordingly, they are NULL-checked.
Change-Id: I07a7de6bdca7b6f8d09e22da11b8863ebf41389a
Reviewed-on: https://boringssl-review.googlesource.com/12343
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
We currently look up SSL_HANDSHAKE off of ssl->s3->hs everywhere, but
this is a little dangerous. Unlike ssl->s3->tmp, ssl->s3->hs may not be
present. Right now we just know not to call some functions outside the
handshake.
Instead, code which expects to only be called during a handshake should
take an explicit SSL_HANDSHAKE * parameter and can assume it non-NULL.
This replaces the SSL * parameter. Instead, that is looked up from
hs->ssl.
Code which is called in both cases, reads from ssl->s3->hs. Ultimately,
we should get to the point that all direct access of ssl->s3->hs needs
to be NULL-checked.
As a start, manage the lifetime of the ssl->s3->hs in SSL_do_handshake.
This allows the top-level handshake_func hooks to be passed in the
SSL_HANDSHAKE *. Later work will route it through the stack. False Start
is a little wonky, but I think this is cleaner overall.
Change-Id: I26dfeb95f1bc5a0a630b5c442c90c26a6b9e2efe
Reviewed-on: https://boringssl-review.googlesource.com/12236
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Due to recent changes, changing the SSL session timeout from cert_cb is
not possible anymore since the new |SSL_SESSION| is initialized *after*
cert_cb is run. The alternative would be using |SSL_CTX_set_timeout| but
the specific |SSL_CTX| could be shared by multiple |SSL|s.
Setting a value on a per-connection basis is useful in case timeouts
need to be calculated dynamically based on specific certificate/domain
information that would be retrieved from inside cert_cb (or other
callbacks).
It would also be possible to set the value to 0 to prevent session
resumption, which is not otherwise doable in the handshake callbacks.
Change-Id: I730a528c647f83f7f77f59b5b21d7e060e4c9843
Reviewed-on: https://boringssl-review.googlesource.com/12440
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This change causes SSL_CTX_set_signed_cert_timestamp_list to check the
SCT list for shallow validity before allowing it to be set.
Change-Id: Ib8a1fe185224ff02ed4ce53a0109e60d934e96b3
Reviewed-on: https://boringssl-review.googlesource.com/12401
Commit-Queue: Adam Langley <agl@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Reviewed-by: David Benjamin <davidben@google.com>
Previously the option to retain only the SHA-256 hash of client
certificates could only be set at the |SSL_CTX| level. This change makes
|SSL| objects inherit the setting from the |SSL_CTX|, but allows it to
be overridden on a per-|SSL| basis.
Change-Id: Id435934af3d425d5f008d2f3b9751d1d0884ee55
Reviewed-on: https://boringssl-review.googlesource.com/12182
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This simplifies a little code around EMS and PSK KE modes, but requires
tweaking the SNI code.
The extensions that are more tightly integrated with the handshake are
still processed inline for now. It does, however, require an extra state
in 1.2 so the asynchronous session callback does not cause extensions to
be processed twice. Tweak a test enforce this.
This and a follow-up to move cert_cb before resumption are done in
preparation for resolving the cipher suite before resumption and only
resuming on match.
Note this has caller-visible effects:
- The legacy SNI callback happens before resumption.
- The ALPN callback happens before resumption.
- Custom extension ClientHello parsing callbacks also cannot depend on
resumption state.
- The DoS protection callback now runs after all the extension callbacks
as it is documented to be called after the resumption decision.
BUG=116
Change-Id: I1281a3b61789b95c370314aaed4f04c1babbc65f
Reviewed-on: https://boringssl-review.googlesource.com/11845
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
It's all of one bit, but having it on the SSL object means we need
manually to reset it on renego.
Change-Id: I989dacd430fe0fa63d76451b95f036a942aefcfe
Reviewed-on: https://boringssl-review.googlesource.com/12229
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This change renames |peer| to |x509_peer| and |cert_chain| to
|x509_chain| in |SSL_SESSION|. It also renames |x509| to |x509_leaf| and
|chain| to |x509_chain| in |CERT|. (All with an eye to maybe making
them lazily initialised in the future).
This a) catches anyone who might be accessing these members directly and
b) makes space for |CRYPTO_BUFFER|-based values to take the unprefixed
names.
Change-Id: I10573304fb7d6f1ea03f9e645f7fc0acdaf71ac2
Reviewed-on: https://boringssl-review.googlesource.com/12162
Reviewed-by: David Benjamin <davidben@google.com>
In transition to removing it altogether, set SSL_MODE_NO_AUTO_CHAIN by
default. If we find some consumer was relying on it, this will allow
them to revert locally with SSL_(CTX_)clear_mode, but hopefully this was
just unused.
BUG=42
Change-Id: Iaf70a436a3324ce02e02dfb18213b6715c034ff2
Reviewed-on: https://boringssl-review.googlesource.com/12180
Commit-Queue: David Benjamin <davidben@google.com>
Reviewed-by: Adam Langley <agl@google.com>
Fuzzer mode explores the handshake, but at the cost of losing coverage
on the record layer. Add a separate build flag and client/server
corpora for this mode.
Note this requires tweaks in consumers' fuzzer build definitions.
BUG=111
Change-Id: I1026dc7301645e165a761068a1daad6eedc9271e
Reviewed-on: https://boringssl-review.googlesource.com/12108
Commit-Queue: David Benjamin <davidben@google.com>
Reviewed-by: Adam Langley <agl@google.com>
This is only used in one place where we don't take advantage of it being
sorted anyway.
Change-Id: If6f0d04e975db903e8a93c57c869ea4964c0be37
Reviewed-on: https://boringssl-review.googlesource.com/12062
Commit-Queue: David Benjamin <davidben@google.com>
Reviewed-by: Adam Langley <agl@google.com>
Get some of the duplicate logic out of the way.
Change-Id: Iee7c64577e14d1ddfead7e1e32c42c5c9f2a310d
Reviewed-on: https://boringssl-review.googlesource.com/11981
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
We need to retain a pair of Finished messages for renegotiation_info.
SSL 3.0's is actually larger than TLS 1.2's (always 12 bytes). Take
renegotiation out in preparation for trimming them to size.
Change-Id: I2e238c48aaf9be07dd696bc2a6af75e9b0ead299
Reviewed-on: https://boringssl-review.googlesource.com/11570
Reviewed-by: Adam Langley <agl@google.com>
We only need one copy, not two. This trims 130 bytes of per-connection
memory.
Change-Id: I334aa7b1f8608e72426986bfa68534d416f3bda9
Reviewed-on: https://boringssl-review.googlesource.com/11569
Reviewed-by: Adam Langley <agl@google.com>
tls-unique isn't defined at TLS 1.3 yet. (Given that it was too small in
1.2, they may just define a new one entirely?) SSL_get_(peer_)finished
doesn't work at 1.3 and is only used in lieu of computing tls-unique,
also undefined at SSL 3.0.
This is in preparation for trimming the copies of the Finished messages
we retain.
Change-Id: Iace99f2baea92c511c4041c592300dfbbe7226e2
Reviewed-on: https://boringssl-review.googlesource.com/11568
Reviewed-by: Adam Langley <agl@google.com>
