An EVP_AEAD_CTX used to be a small struct that contained a pointer to
an AEAD-specific context. That involved heap allocating the
AEAD-specific context, which was a problem for users who wanted to setup
and discard these objects quickly.
Instead this change makes EVP_AEAD_CTX large enough to contain the
AEAD-specific context inside itself. The dominant AEAD is AES-GCM, and
that's also the largest. So, in practice, this shouldn't waste too much
memory.
Change-Id: I795cb37afae9df1424f882adaf514a222e040c80
Reviewed-on: https://boringssl-review.googlesource.com/c/32506
Commit-Queue: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Reviewed-by: David Benjamin <davidben@google.com>
This one is a little thorny. All the various block cipher modes
functions and callbacks take a void *key. This allows them to be used
with multiple kinds of block ciphers.
However, the implementations of those callbacks are the normal typed
functions, like AES_encrypt. Those take AES_KEY *key. While, at the ABI
level, this is perfectly fine, C considers this undefined behavior.
If we wish to preserve this genericness, we could either instantiate
multiple versions of these mode functions or create wrappers of
AES_encrypt, etc., that take void *key.
The former means more code and is tedious without C++ templates (maybe
someday...). The latter would not be difficult for a compiler to
optimize out. C mistakenly allowed comparing function pointers for
equality, which means a compiler cannot replace pointers to wrapper
functions with the real thing. (That said, the performance-sensitive
bits already act in chunks, e.g. ctr128_f, so the function call overhead
shouldn't matter.)
But our only 128-bit block cipher is AES anyway, so I just switched
things to use AES_KEY throughout. AES is doing fine, and hopefully we
would have the sense not to pair a hypothetical future block cipher with
so many modes!
Change-Id: Ied3e843f0e3042a439f09e655b29847ade9d4c7d
Reviewed-on: https://boringssl-review.googlesource.com/32107
Reviewed-by: Adam Langley <agl@google.com>
EVP_AEAD reused portions of EVP_CIPHER's GCM128_CONTEXT which contains both the
key and intermediate state for each operation. (The legacy OpenSSL EVP_CIPHER
API has no way to store just a key.) Split out a GCM128_KEY and store that
instead.
Change-Id: Ibc550084fa82963d3860346ed26f9cf170dceda5
Reviewed-on: https://boringssl-review.googlesource.com/32004
Commit-Queue: David Benjamin <davidben@google.com>
Commit-Queue: Adam Langley <agl@google.com>
Reviewed-by: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Change-Id: I2d1671a4f21a602191fd0c9b932244a376ac5713
Reviewed-on: https://boringssl-review.googlesource.com/31104
Reviewed-by: David Benjamin <davidben@google.com>
Reviewed-by: Steven Valdez <svaldez@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Upstream generalized most of the EVP_CTRL_GCM_* constants to be their general
AEAD API in 1.1.0. Define them for better compatibility with code that targets
OpenSSL 1.1.0.
Change-Id: Ieaed8379eebde3718e3048f6290c21cdeac01efd
Reviewed-on: https://boringssl-review.googlesource.com/30604
Commit-Queue: David Benjamin <davidben@google.com>
Commit-Queue: Adam Langley <agl@google.com>
Reviewed-by: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
This change adds an AES-GCM AEAD that enforces nonce uniqueness inside
the FIPS module, like we have for TLS 1.2. While TLS 1.3 has not yet
been mentioned in the FIPS 140 IG, we expect it to be in the next ~12
months and so are preparing for that.
Change-Id: I65a7d8196b08dc0033bdde5c844a73059da13d9e
Reviewed-on: https://boringssl-review.googlesource.com/29224
Commit-Queue: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Reviewed-by: David Benjamin <davidben@google.com>
cryptography.io gets offended if the library supports some OFB sizes but
not others.
Change-Id: I7fc7b12e7820547a82aae84d9418457389a482fe
Reviewed-on: https://boringssl-review.googlesource.com/29204
Reviewed-by: Adam Langley <agl@google.com>
This was reverted a second time because it ended up always setting the
final argument to CRYPTO_gcm128_init to zero, which disabled some
acceleration of GCM on ≥Haswell. With this update, that argument will be
set to 1 if |aes_hw_*| functions are being used.
Probably this will need to be reverted too for some reason. I'm hoping
to fill the entire git short description with “Revert”.
Change-Id: Ib4a06f937d35d95affdc0b63f29f01c4a8c47d03
Reviewed-on: https://boringssl-review.googlesource.com/28484
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: Adam Langley <agl@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Broke Aarch64 on the main builders (but not the trybots, somehow.)
Change-Id: I53eb09c99ef42a59628b0506b5ddb125299b554a
Reviewed-on: https://boringssl-review.googlesource.com/28364
Reviewed-by: Adam Langley <agl@google.com>
This also happens to make the AES_[en|de]crypt functions use AES-NI
(where available) on Intel.
Update-Note: this substantially changes how AES-NI is triggered. Worth running bssl speed (on both k8 and ppc), before and after, to confirm that there are no regressions.
Change-Id: I5f22c1975236bbc1633c24ab60d683bca8ddd4c3
Reviewed-on: https://boringssl-review.googlesource.com/28026
Reviewed-by: David Benjamin <davidben@google.com>
bcm.c means e_aes.c can no longer be lazy about warning push/pop.
Change-Id: I558041bab3baa00e3adc628fe19486545d0f6be3
Reviewed-on: https://boringssl-review.googlesource.com/28164
Commit-Queue: Steven Valdez <svaldez@google.com>
Reviewed-by: Steven Valdez <svaldez@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Previously we required that the calls to TLS's AES-GCM use an
incrementing nonce. This change relaxes that requirement so that nonces
need only be strictly monotonic (i.e. values can now be skipped). This
still meets the uniqueness requirements of a nonce.
Change-Id: Ib649a58bb93bf4dc0e081de8a5971daefffe9c70
Reviewed-on: https://boringssl-review.googlesource.com/25384
Commit-Queue: David Benjamin <davidben@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Although we are derived from 1.0.2, we mimic 1.1.0 in some ways around
our FOO_up_ref functions and opaque libssl types. This causes some
difficulties when porting third-party code as any OPENSSL_VERSION_NUMBER
checks for 1.1.0 APIs we have will be wrong.
Moreover, adding accessors without changing OPENSSL_VERSION_NUMBER can
break external projects. It is common to implement a compatibility
version of an accessor under #ifdef as a static function. This then
conflicts with our headers if we, unlike OpenSSL 1.0.2, have this
function.
This change switches OPENSSL_VERSION_NUMBER to 1.1.0 and atomically adds
enough accessors for software with 1.1.0 support already. The hope is
this will unblock hiding SSL_CTX and SSL_SESSION, which will be
especially useful with C++-ficiation. The cost is we will hit some
growing pains as more 1.1.0 consumers enter the ecosystem and we
converge on the right set of APIs to import from upstream.
It does not remove any 1.0.2 APIs, so we will not require that all
projects support 1.1.0. The exception is APIs which changed in 1.1.0 but
did not change the function signature. Those are breaking changes.
Specifically:
- SSL_CTX_sess_set_get_cb is now const-correct.
- X509_get0_signature is now const-correct.
For C++ consumers only, this change temporarily includes an overload
hack for SSL_CTX_sess_set_get_cb that keeps the old callback working.
This is a workaround for Node not yet supporting OpenSSL 1.1.0.
The version number is set at (the as yet unreleased) 1.1.0g to denote
that this change includes https://github.com/openssl/openssl/pull/4384.
Bug: 91
Change-Id: I5eeb27448a6db4c25c244afac37f9604d9608a76
Reviewed-on: https://boringssl-review.googlesource.com/10340
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
crypto/{asn1,x509,x509v3,pem} were skipped as they are still OpenSSL
style.
Change-Id: I3cd9a60e1cb483a981aca325041f3fbce294247c
Reviewed-on: https://boringssl-review.googlesource.com/19504
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
Similarly, add EVP_AEAD_CTX_tag_len which computes the exact tag length
for required by EVP_AEAD_CTX_seal_scatter.
Change-Id: I069b0ad16fab314fd42f6048a3c1dc45e8376f7f
Reviewed-on: https://boringssl-review.googlesource.com/18324
Reviewed-by: Adam Langley <agl@google.com>
There's a |tag_len| in the generic AEAD context now so keeping a second
copy only invites confusion.
Change-Id: I029d8a8ee366e3af7f61408177c950d5b1a740a9
Reviewed-on: https://boringssl-review.googlesource.com/17424
Commit-Queue: Adam Langley <agl@google.com>
Reviewed-by: Adam Langley <agl@google.com>
These behave like EVP_AEAD_CTX_{seal,open} respectively, but receive
ciphertext and authentication tag as separate arguments, rather than one
contiguous out or in buffer.
Change-Id: Ia4f1b83424bc7067c55dd9e5a68f18061dab4d07
Reviewed-on: https://boringssl-review.googlesource.com/16924
Reviewed-by: Adam Langley <agl@google.com>
Commit-Queue: Adam Langley <agl@google.com>
It shouldn't have been defined for variable-length nonces at all, but so
it goes. EVP_CIPHER rejected this by way of EVP_CTRL_GCM_SET_IVLEN
comparing <= 0, but the EVP_AEAD API did not.
I've done the test in a separate file on the assumption that aead_test
will become GTest shortly, at which point it will be easy to stick extra
tests into the same file as the FileTest ones.
Thanks to Daniel Bleichenbacher and Thanh Bui of Project Wycheproof for
the report.
Change-Id: Ic4616b39a1d7fe74a1f14fb58cccec2ce7c4f2f3
Reviewed-on: https://boringssl-review.googlesource.com/16544
Reviewed-by: Adam Langley <agl@google.com>
Change-Id: I7bf485a9bfe0d7b7a3dc3081f86278fee87b8c74
Reviewed-on: https://boringssl-review.googlesource.com/16485
Reviewed-by: David Benjamin <davidben@google.com>
Commit-Queue: David Benjamin <davidben@google.com>
CQ-Verified: CQ bot account: commit-bot@chromium.org <commit-bot@chromium.org>
