Estonian IDs issued between September 2014 to September 2015 are broken and use
negative moduli. They last five years and are common enough that we need to
work around this bug.
Add parallel "buggy" versions of BN_cbs2unsigned and RSA_parse_public_key which
tolerate this mistake, to align with OpenSSL's previous behavior. This code is
currently hooked up to rsa_pub_decode in RSA_ASN1_METHOD so that d2i_X509 is
tolerant. (This isn't a huge deal as the rest of that stack still uses the
legacy ASN.1 code which is overly lenient in many other ways.)
In future, when Chromium isn't using crypto/x509 and has more unified
certificate handling code, we can put client certificates under a slightly
different codepath, so this needn't hold for all certificates forever. Then in
September 2019, when the broken Estonian certificates all expire, we can purge
this codepath altogether.
BUG=532048
Change-Id: Iadb245048c71dba2eec45dd066c4a6e077140751
Reviewed-on: https://boringssl-review.googlesource.com/5894
Reviewed-by: Adam Langley <agl@google.com>
This gets the documentation into the ssl.h documentation, and removes
one of the circularly-dependent headers hanging off ssl.h. Also fixes
some typos; there were a few instances of "SSL *ctx".
Change-Id: I2a41c6f518f4780af84d468ed220fe7b0b8eb0d3
Reviewed-on: https://boringssl-review.googlesource.com/5883
Reviewed-by: Adam Langley <agl@google.com>
Also switch to the new variable names (SSL_CTX *ctx, SSL *ssl,
SSL_SESSION *session) for all documented functions.
Change-Id: I15e15a703b96af1727601108223c7ce3b0691f1d
Reviewed-on: https://boringssl-review.googlesource.com/5882
Reviewed-by: Adam Langley <agl@google.com>
To be consistent with some of the other headers and because SSL_METHOD
no longer has a place to anchor documentation, move the type
documentation up to the corresponding section headers, rather than
attached to a convenient function.
Also document thread-safety properties of SSL and SSL_CTX.
Change-Id: I7109d704d28dda3f5d83c72d86fe31bc302b816e
Reviewed-on: https://boringssl-review.googlesource.com/5876
Reviewed-by: Adam Langley <agl@google.com>
This is arguably more commonly queried connection information than the
tls-unique.
Change-Id: I1f080536153ba9f178af8e92cb43b03df37110b5
Reviewed-on: https://boringssl-review.googlesource.com/5874
Reviewed-by: Adam Langley <agl@google.com>
Just the stuff that has been pulled out into sections already.
Change-Id: I3da6bc61d79ccfe2b18d888075dc32026a656464
Reviewed-on: https://boringssl-review.googlesource.com/5873
Reviewed-by: Adam Langley <agl@google.com>
Unfortunately, these are also some of the worst APIs in the SSL stack.
I've tried to capture all the things they expose to the caller. 0 vs -1
is intentionally left unexpanded on for now. Upstream's documentation
says 0 means transport EOF, which is a nice idea but isn't true. (A lot
of random functions return 0 on error and pass it up to the caller.)
https://crbug.com/466303 tracks fixing that.
SSL_set_bio is intentionally documented to NOT be usable when they're
already configured. The function tries to behave in this case and even
with additional cases when |rbio| and/or |wbio| are unchanged, but this
is buggy. For instance, this will explode:
SSL_set_bio(ssl, bio1, bio1);
SSL_set_bio(ssl, bio2, SSL_get_wbio(ssl));
As will this, though it's less clear this is part of the API contract
due to SSL taking ownership.
SSL_set_bio(ssl, bio1, bio2);
SSL_set_bio(ssl, bio2, bio1);
It also tries to handle ssl->bbio already existing, but I doubt it quite
works. Hopefully we can drop ssl->bbio eventually. (Why is this so
complicated...)
Change-Id: I5f9f3043915bffc67e2ebd282813e04afbe076e6
Reviewed-on: https://boringssl-review.googlesource.com/5872
Reviewed-by: Adam Langley <agl@google.com>
Change-Id: Ifa44fef160fc9d67771eed165f8fc277f28a0222
Reviewed-on: https://boringssl-review.googlesource.com/5840
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
A small handful of functions got a 'Deprecated:' prefix instead in
documentation.
Change-Id: Ic151fb7d797514add66bc6465b6851b666a471bc
Reviewed-on: https://boringssl-review.googlesource.com/5825
Reviewed-by: Adam Langley <agl@google.com>
We had a few duplicate section names.
Change-Id: I0c9b2a1669ac14392fd577097d5ee8dd80f7c73c
Reviewed-on: https://boringssl-review.googlesource.com/5824
Reviewed-by: Adam Langley <agl@google.com>
Callers that lack hardware random may obtain a speed improvement by
calling |RAND_enable_fork_unsafe_buffering|, which enables a
thread-local buffer around reads from /dev/urandom.
Change-Id: I46e675d1679b20434dd520c58ece0f888f38a241
Reviewed-on: https://boringssl-review.googlesource.com/5792
Reviewed-by: Adam Langley <agl@google.com>
History has shown there are bugs in not setting the error code
appropriately, which makes any decision making based on
|ERR_peek_last_error|, etc. suspect. Also, this call was interfering
with the link-time optimizer's ability to discard the implementations of
many functions in crypto/err during dead code elimination.
Change-Id: Iba9e553bf0a72a1370ceb17ff275f5a20fca31ec
Reviewed-on: https://boringssl-review.googlesource.com/5748
Reviewed-by: Adam Langley <agl@google.com>
Applications may require the stapled OCSP response in order to verify
the certificate within the verification callback.
Change-Id: I8002e527f90c3ce7b6a66e3203c0a68371aac5ec
Reviewed-on: https://boringssl-review.googlesource.com/5730
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
This change adds the ability to configure ciphers specifically for
TLS ≥ 1.0. This compliments the existing ability to specify ciphers
for TLS ≥ 1.1.
This is useful because TLS 1.0 is the first version not to suffer from
POODLE. (Assuming that it's implemented correctly[1].) Thus one might
wish to reserve RC4 solely for SSLv3.
[1] https://www.imperialviolet.org/2014/12/08/poodleagain.html
Change-Id: I774d5336fead48f03d8a0a3cf80c369692ee60df
Reviewed-on: https://boringssl-review.googlesource.com/5793
Reviewed-by: Adam Langley <agl@google.com>
This is useful to skip an optional element, and mirrors the behaviour of
CBS_get_optional_asn1_octet_string.
Change-Id: Icb538c5e99a1d4e46412cae3c438184a94fab339
Reviewed-on: https://boringssl-review.googlesource.com/5800
Reviewed-by: Adam Langley <agl@google.com>
If the two extensions select different next protocols (quite possible since one
is server-selected and the other is client-selected), things will break. This
matches the behavior of NSS (Firefox) and Go.
Change-Id: Ie1da97bf062b91a370c85c12bc61423220a22f36
Reviewed-on: https://boringssl-review.googlesource.com/5780
Reviewed-by: Adam Langley <agl@google.com>
The handshake state machine is still rather messy (we should switch to CBB,
split the key exchanges apart, and also pull reading and writing out), but this
version makes it more obvious to the compiler that |p| and |sig_len| are
initialized. The old logic created a synchronous-only state which, if enterred
directly, resulted in some variables being uninitialized.
Change-Id: Ia3ac9397d523fe299c50a95dc82a9b26304cea96
Reviewed-on: https://boringssl-review.googlesource.com/5765
Reviewed-by: Adam Langley <agl@google.com>
Move cert_chain to the SSL_SESSION. Now everything on an SSL_SESSION is
properly serialized. The cert_chain field is, unfortunately, messed up
since it means different things between client and server.
There exists code which calls SSL_get_peer_cert_chain as both client and
server and assumes the existing semantics for each. Since that function
doesn't return a newly-allocated STACK_OF(X509), normalizing between the
two formats is a nuisance (we'd either need to store both cert_chain and
cert_chain_full on the SSL_SESSION or create one of the two variants
on-demand and stash it into the SSL).
This CL does not resolve this and retains the client/server difference
in SSL_SESSION. The SSL_SESSION serialization is a little inefficient
(two copies of the leaf certificate) for a client, but clients don't
typically serialize sessions. Should we wish to resolve it in the
future, we can use a different tag number. Because this was historically
unserialized, existing code must already allow for cert_chain not being
preserved across i2d/d2i.
In keeping with the semantics of retain_only_sha256_of_client_certs,
cert_chain is not retained when that flag is set.
Change-Id: Ieb72fc62c3076dd59750219e550902f1ad039651
Reviewed-on: https://boringssl-review.googlesource.com/5759
Reviewed-by: Adam Langley <agl@google.com>
It's completely redundant with the copy in the SSL_SESSION except it
isn't serialized.
Change-Id: I1d95a14cae064c599e4bab576df1dd156da4b81c
Reviewed-on: https://boringssl-review.googlesource.com/5757
Reviewed-by: Adam Langley <agl@google.com>
Gets another field out of the SSL_SESSION.
Change-Id: I9a27255533f8e43e152808427466ec1306cfcc60
Reviewed-on: https://boringssl-review.googlesource.com/5756
Reviewed-by: Adam Langley <agl@google.com>
It's supposed to be void*. The only reason this was working was that it was
only called in C which happily casts from void* to T*. (But if called in C++ in
a macro, it breaks.)
Change-Id: I7f765c3572b9b4815ae58da852be1e742de1bd96
Reviewed-on: https://boringssl-review.googlesource.com/5760
Reviewed-by: Adam Langley <agl@google.com>
This begins decoupling the transport from the SSL state machine. The buffering
logic is hidden behind an opaque API. Fields like ssl->packet and
ssl->packet_length are gone.
ssl3_get_record and dtls1_get_record now call low-level tls_open_record and
dtls_open_record functions that unpack a single record independent of who owns
the buffer. Both may be called in-place. This removes ssl->rstate which was
redundant with the buffer length.
Future work will push the buffer up the stack until it is above the handshake.
Then we can expose SSL_open and SSL_seal APIs which act like *_open_record but
return a slightly larger enum due to other events being possible. Likewise the
handshake state machine will be detached from its buffer. The existing
SSL_read, SSL_write, etc., APIs will be implemented on top of SSL_open, etc.,
combined with ssl_read_buffer_* and ssl_write_buffer_*. (Which is why
ssl_read_buffer_extend still tries to abstract between TLS's and DTLS's fairly
different needs.)
The new buffering logic does not support read-ahead (removed previously) since
it lacks a memmove on ssl_read_buffer_discard for TLS, but this could be added
if desired. The old buffering logic wasn't quite right anyway; it tried to
avoid the memmove in some cases and could get stuck too far into the buffer and
not accept records. (The only time the memmove is optional is in DTLS or if
enough of the record header is available to know that the entire next record
would fit in the buffer.)
The new logic also now actually decrypts the ciphertext in-place again, rather
than almost in-place when there's an explicit nonce/IV. (That accidentally
switched in https://boringssl-review.googlesource.com/#/c/4792/; see
3d59e04bce96474099ba76786a2337e99ae14505.)
BUG=468889
Change-Id: I403c1626253c46897f47c7ae93aeab1064b767b2
Reviewed-on: https://boringssl-review.googlesource.com/5715
Reviewed-by: Adam Langley <agl@google.com>
This consists mostly of re-adding OpenSSL's implementation of PBKDF2
(very loosely based upon e0d26bb3). The meat of it, namely
|PKCS5_PBKDF2_HMAC|, was already present, but unused.
In addition, |PKCS8_encrypt| and |PKCS8_decrypt| must be changed to
not perform UCS-2 conversion in the PBES2 case.
Change-Id: Id170ecabc43c79491600051147d1d6d3c7273dbc
Reviewed-on: https://boringssl-review.googlesource.com/5745
Reviewed-by: Adam Langley <agl@google.com>
arm_arch.h is included from ARM asm files, but lives in crypto/, not
openssl/include/. Since the asm files are often built from a different
location than their position in the source tree, relative include paths
are unlikely to work so, rather than having crypto/ be a de-facto,
second global include path, this change moves arm_arch.h to
include/openssl/.
It also removes entries from many include paths because they should be
needed as relative includes are always based on the locations of the
source file.
Change-Id: I638ff43d641ca043a4fc06c0d901b11c6ff73542
Reviewed-on: https://boringssl-review.googlesource.com/5746
Reviewed-by: Adam Langley <agl@google.com>
Match the other stack-allocated types in that we expose a wrapper function to
get them into the zero state. Makes it more amenable to templates like
ScopedOpenSSLContext.
Change-Id: Ibc7b2b1bc0421ce5ccc84760c78c0b143441ab0f
Reviewed-on: https://boringssl-review.googlesource.com/5753
Reviewed-by: Adam Langley <agl@google.com>
This made sense when the cipher might have been standardized as-is, so a
DHE_RSA variant could appease the IETF. Since the standardized variant is going
to have some nonce tweaks anyway, there's no sense in keeping this around. Get
rid of one non-standard cipher suite value early. (Even if they were to be
standardized as-is, it's not clear we should implement new DHE cipher suites at
this point.)
Chrome UMA, unsurprisingly, shows that it's unused.
Change-Id: Id83d73a4294b470ec2e94d5308fba135d6eeb228
Reviewed-on: https://boringssl-review.googlesource.com/5750
Reviewed-by: Adam Langley <agl@google.com>
(I couldn't find an authoritative source of test data, including in
OpenSSL's source, so I used OpenSSL's implementation to produce the
test ciphertext.)
This benefits globalplatform.
Change-Id: Ifb79e77afb7efed1c329126a1a459bbf7ce6ca00
Reviewed-on: https://boringssl-review.googlesource.com/5725
Reviewed-by: Adam Langley <agl@google.com>
Note that while |DES_ede2_cbc_encrypt| exists, I didn't use it: I
think it's easier to see what's happening this way.
(I couldn't find an authoritative source of test data, including in
OpenSSL's source, so I used OpenSSL's implementation to produce the
test ciphertext.)
This benefits globalplatform.
Change-Id: I7e17ca0b69067d7b3f4bc213b4616eb269882ae0
Reviewed-on: https://boringssl-review.googlesource.com/5724
Reviewed-by: Adam Langley <agl@google.com>
|DES_ecb_encrypt| was already present.
This benefits globalplatform.
Change-Id: I2ab41eb1936b3026439b5981fb27e29a12672b66
Reviewed-on: https://boringssl-review.googlesource.com/5723
Reviewed-by: Adam Langley <agl@google.com>
This is a simpler implementation than OpenSSL's, lacking responder IDs
and request extensions support. This mirrors the client implementation
already present.
Change-Id: I54592b60e0a708bfb003d491c9250401403c9e69
Reviewed-on: https://boringssl-review.googlesource.com/5700
Reviewed-by: Adam Langley <agl@google.com>
They're not called (new in 1.0.2). We actually may well need to
configure these later to strike ECDSA from the list on Chrome/XP
depending on what TLS 1.3 does, but for now striking it from the cipher
suite list is both necessary and sufficient. I think we're better off
removing these for now and adding new APIs later if we need them.
(This API is weird. You pass in an array of NIDs that must be even
length and alternating between hash and signature NID. We'd also need a
way to query the configured set of sigalgs to filter away. Those used to
exist but were removed in
https://boringssl-review.googlesource.com/#/c/5347/. SSL_get_sigalgs is
an even uglier API and doesn't act on the SSL_CTX.)
And with that, SSL_ctrl and SSL_CTX_ctrl can *finally* be dropped. Don't
leave no-op wrappers; anything calling SSL_ctrl and SSL_CTX_ctrl should
instead switch to the wrapper macros.
BUG=404754
Change-Id: I5d465cd27eef30d108eeb6de075330c9ef5c05e8
Reviewed-on: https://boringssl-review.googlesource.com/5675
Reviewed-by: Adam Langley <agl@google.com>
I'm not sure why one would ever want to externally know the curve list
supported by the server. The API is new as of 1.0.2 and has no callers.
Configuring curves will be much more useful when Curve25519 exists and the API
isn't terribly crazy, so keep that API around and promote it to a real
function.
BUG=404754
Change-Id: Ibd5858791d3dfb30d53dd680cb75b0caddcbb7df
Reviewed-on: https://boringssl-review.googlesource.com/5674
Reviewed-by: Adam Langley <agl@google.com>
This change stores the size of the group/modulus (for RSA/DHE) or curve
ID (for ECDHE) in the |SSL_SESSION|. This makes it available for UIs
where desired.
Change-Id: I354141da432a08f71704c9683f298b361362483d
Reviewed-on: https://boringssl-review.googlesource.com/5280
Reviewed-by: Adam Langley <agl@google.com>
I'm not sure why I made a separate one. (Not quite how the V2ClientHello
code will look in the buffer-free API yet. Probably the future
refactored SSL_HANDSHAKE gadget will need separate entry points to
consume a handshake message or V2ClientHello and the driver deals with
framing.)
This also means that ssl3_setup_read_buffer is never called external to
ssl3_read_n.
BUG=468889
Change-Id: I872f1188270968bf53ee9d0488a761c772a11e9e
Reviewed-on: https://boringssl-review.googlesource.com/5713
Reviewed-by: Adam Langley <agl@google.com>
BN_bin2bn takes a size_t as it should, but it passes that into bn_wexpand which
takes unsigned. Switch bn_wexpand and bn_expand to take size_t before they
check bounds against INT_MAX.
BIGNUM itself still uses int everywhere and we may want to audit all the
arithmetic at some point. Although I suspect having bn_expand require that the
number of bits fit in an int is sufficient to make everything happy, unless
we're doing interesting arithmetic on the number of bits somewhere.
Change-Id: Id191a4a095adb7c938cde6f5a28bee56644720c6
Reviewed-on: https://boringssl-review.googlesource.com/5680
Reviewed-by: Adam Langley <agl@google.com>
This isn't called and, with the fixed-DH client cert types removed, is
only useful if a server wishes to not accept ECDSA certificates or
something.
BUG=404754
Change-Id: I21d8e1a71aedf446ce974fbeadc62f311ae086db
Reviewed-on: https://boringssl-review.googlesource.com/5673
Reviewed-by: Adam Langley <agl@google.com>
These are unused (new as of 1.0.2). Although being able to separate the
two stores is a reasonable thing to do, we hope to remove the
auto-chaining feature eventually. Given that, SSL_CTX_set_cert_store
should suffice. This gets rid of two more ctrl macros.
BUG=404754,486295
Change-Id: Id84de95d7b2ad5a14fc68a62bb2394f01fa67bb4
Reviewed-on: https://boringssl-review.googlesource.com/5672
Reviewed-by: Adam Langley <agl@google.com>
