Compression is gone, so don't allow for compression overhead. With that fixed,
the second rr->length check in ssl3_get_record matches the length computation
which sizes the read buffer. The first is wrong and doesn't account for the
alignment padding. Move the second to the first.
Change-Id: I3f4f05de9fdf5c645ff24493bbfdf303dcc1aa90
Reviewed-on: https://boringssl-review.googlesource.com/4236
Reviewed-by: Adam Langley <agl@google.com>
Also check for overflow, although it really shouldn't happen.
Change-Id: I34dfe8eaf635aeaa8bef2656fda3cd0bad7e1268
Reviewed-on: https://boringssl-review.googlesource.com/4235
Reviewed-by: Adam Langley <agl@google.com>
Fix up the variable names. Also avoid the messy logic of checking whether the
label and context collide with the normal key expansion ones in the face of
adverserial inputs. Make that the caller's responsibility, just as it's already
the caller's responsibility to ensure that different calls don't overlap. (The
label should be a constant string in an IANA registry anyway.)
Change-Id: I062fadb7b6a18fa946b883be660ea9b3f0f6277c
Reviewed-on: https://boringssl-review.googlesource.com/4216
Reviewed-by: Adam Langley <agl@google.com>
Separate actually writing the fragment to the network from assembling it so
there is no need for is_fragment. record_split_done also needn't be a global;
as of 7fdeaf11017b82368e0a97547fc491b90ad40f67, it is always reset to 0 whether
or not SSL3_WANT_WRITE occurred, despite the comment.
I believe this is sound, but the pre-7fdeaf1 logic wasn't quiiite right;
ssl3_write_pending allows a retry to supply *additional* data, so not all
plaintext had been commited to before the IV was randomized. We could fix this
by tracking how many bytes were committed to the last time we fragmented, but
this is purely an optimization and doesn't seem worth the complexity.
This also fixes the alignment computation in the record-splitting case. The
extra byte was wrong, as demonstrated by the assert.
Change-Id: Ia087a45a6622f4faad32e501942cc910eca1237b
Reviewed-on: https://boringssl-review.googlesource.com/4234
Reviewed-by: Adam Langley <agl@google.com>
There's multiple sets of APIs for selecting the curve. Fold away
SSL_OP_SINGLE_ECDH_USE as failing to set it is either a no-op or a bug. With
that gone, the consumer only needs to control the selection of a curve, with
key generation from then on being uniform. Also clean up the interaction
between the three API modes in s3_srvr.c; they were already mutually exclusive
due to tls1_check_ec_tmp_key.
This also removes all callers of EC_KEY_dup (and thus CRYPTO_dup_ex_data)
within the library.
Change-Id: I477b13bd9e77eb03d944ef631dd521639968dc8c
Reviewed-on: https://boringssl-review.googlesource.com/4200
Reviewed-by: Adam Langley <agl@google.com>
Along the way, fix a host of missing failure checks. This will save some
headache when it comes time to run these under the malloc failure tests.
Change-Id: I3fd589bd094178723398e793d6bc578884e99b67
Reviewed-on: https://boringssl-review.googlesource.com/4126
Reviewed-by: Adam Langley <agl@google.com>
MIPS64 confusingly sets __mips__, but it's not a 32-bit platform. This
change updates the defines in base.h to recognise MIPS64 based on both
__mips__ and __LP64__ being defined.
Change-Id: I220f5d9c8f1cd7d3089cc013348e6f95cdee76d9
Reviewed-on: https://boringssl-review.googlesource.com/4093
Reviewed-by: Adam Langley <agl@google.com>
(system/keymaster is using them now.)
Change-Id: I8fba501005b9318b7d3a76bf1715fb772b23c49d
Reviewed-on: https://boringssl-review.googlesource.com/4092
Reviewed-by: Adam Langley <agl@google.com>
It's not actually CRYPTO_add_locked, despite the name. I guess they just needed
a name that didn't clash with CRYPTO_add.
Change-Id: I3fdee08bf75e9a4e1b5e75630707c0be5792599b
Reviewed-on: https://boringssl-review.googlesource.com/4102
Reviewed-by: Adam Langley <agl@google.com>
Within the library, only ssl_update_cache read them, so add a dedicated field
to replace that use.
The APIs have a handful of uninteresting callers so I've left them in for now,
but they now always return zero.
Change-Id: Ie4e36fd4ab18f9bff544541d042bf3c098a46933
Reviewed-on: https://boringssl-review.googlesource.com/4101
Reviewed-by: Adam Langley <agl@google.com>
Align with upstream's renames from a while ago. These names are considerably
more standard. This also aligns with upstream in that both "ECDHE" and "EECDH"
are now accepted in the various cipher string parsing bits.
Change-Id: I84c3daeacf806f79f12bc661c314941828656b04
Reviewed-on: https://boringssl-review.googlesource.com/4053
Reviewed-by: Adam Langley <agl@google.com>
(Thanks to William Hesse.)
Change-Id: I8479663250546a5ec0a024f80e50541f91d833bc
Reviewed-on: https://boringssl-review.googlesource.com/4020
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
They do not quite measure the same value for EC keys. "size" is a really weird
notion to generalize on so we should document what it means for each key type.
EVP_PKEY_size's meaning is most tied to signatures, thanks to EVP_SignFinal
implicitly using it as output bounds.
Change-Id: I7504c142818f8f90f8bcf6891c97a6adaf2d574e
Reviewed-on: https://boringssl-review.googlesource.com/4000
Reviewed-by: Adam Langley <agl@google.com>
C99 doesn't, technically, allow empty statements. Thus if a #define'ed
function ends in a semicolon, and the use of it also ends in a
semicolon, then the compiler sees “;;” at the end.
Since a choice has to be made, I prefer that the semicolon exist at the
“callsite” of a #define'ed fuction. But I haven't gone and changed
everything to follow that in this patch.
Change-Id: I1343e52a5ac6255db49aa053048d0df3225bcf43
Reviewed-on: https://boringssl-review.googlesource.com/3890
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
At least the linker can discard this function in the cases where nobody
is calling it.
Change-Id: I30050e918e6bc1dd9c97cc70f3a56408701abebc
Reviewed-on: https://boringssl-review.googlesource.com/3724
Reviewed-by: Adam Langley <agl@google.com>
Because NTLM authentication is still a thing.
Change-Id: I3308a8431c82f0b614e09ce3e5efac1526881f1e
Reviewed-on: https://boringssl-review.googlesource.com/3723
Reviewed-by: Adam Langley <agl@google.com>
This allows the current RC4 state of an SSL* to be extracted. We have
internal uses for this functionality.
Change-Id: Ic124c4b253c8325751f49e7a4c021768620ea4b7
Reviewed-on: https://boringssl-review.googlesource.com/3722
Reviewed-by: Adam Langley <agl@google.com>
This callback receives information about the ClientHello and can decide
whether or not to allow the handshake to continue.
Change-Id: I21be28335fa74fedb5b73a310ee24310670fc923
Reviewed-on: https://boringssl-review.googlesource.com/3721
Reviewed-by: Adam Langley <agl@google.com>
* Eliminate the possibility of multiple lock IDs having the same
value (CRYPTO_LOCK_FIPS2 and CRYPTO_LOCK_OBJ were both 40 prior to
this commit).
* Remove unused lock IDs.
* Automatically guarantee that lock IDs and lock names stay in sync.
Change-Id: If20e462db1285fa891595a7e52404ad011ff16f6
Reviewed-on: https://boringssl-review.googlesource.com/3923
Reviewed-by: Adam Langley <agl@google.com>
No code within BoringSSL or Google (grep for EVP_PKEY_CTX_(ctrl|get|set)) is
sensitive to the various failure cases. Normalize it all to 0/1 for simplicity.
This does carry a slight risk: any new ctrl hooks we import from upstream that,
like EVP_PKEY_CTX_get_rsa_oaep_md, return something other than success/failure
cannot be called directly via EVP_PKEY_CTX_ctrl. They instead need to
internally be routed through a struct like CBS and only called through the
wrappers. To that end, unexport EVP_PKEY_CTX_ctrl and require that callers use
the wrappers. No code in Google uses it directly and, if need be, switching to
the wrapper would be an incredibly upstreamable patch.
Change-Id: I3fd4e5a1a0f3d4d1c4122c52d4c74a5105b99cd5
Reviewed-on: https://boringssl-review.googlesource.com/3874
Reviewed-by: Adam Langley <agl@google.com>
This is the only EVP_PKEY ctrl hook which returns something other than a
boolean.
Change-Id: Ic226aef168abdf72e5d30e8264a559ed5039a055
Reviewed-on: https://boringssl-review.googlesource.com/3873
Reviewed-by: Adam Langley <agl@google.com>
This removes another place where we're internally sensitive to the
success/failure conditions.
Change-Id: I18fecf6457e841ba0afb718397b9b5fd3bbdfe4c
Reviewed-on: https://boringssl-review.googlesource.com/3872
Reviewed-by: Adam Langley <agl@google.com>
All EVP_PKEY types return 1 on that. (It can go away entirely when
EVP_PKEY_HMAC is gone.) This removes a place internally where we're sensitive
to the failure code.
Change-Id: Ic6cda2da9337ba7ef1c66a18e40c5dcc44fcf840
Reviewed-on: https://boringssl-review.googlesource.com/3871
Reviewed-by: Adam Langley <agl@google.com>
Turn them into static functions that take in an hm_fragment. It's not
immediately obvious that the frag_off/frag_len bounds checks and the msg_len
consistency check are critical to avoiding an out-of-bounds write. Better to
have dtls1_hm_fragment_mark also check internally.
Also rework the bitmask logic to be clearer and avoid a table.
Change-Id: Ica54e98f66295efb323e033cb6c67ab21e7d6cbc
Reviewed-on: https://boringssl-review.googlesource.com/3765
Reviewed-by: Adam Langley <agl@google.com>
Replace unsigned long with the appropriate sized integer type.
Change-Id: I7b4641d84568f6c11efa25350a9e488a556fc92e
Reviewed-on: https://boringssl-review.googlesource.com/3766
Reviewed-by: Adam Langley <agl@google.com>
Notably, drop all special cases around receiving a message in order and
receiving a full message. It makes things more complicated and was the source
of bugs (the MixCompleteMessageWithFragments tests added in this CL did not
pass before). Instead, every message goes through an hm_fragment, and
dtls1_get_message always checks buffered_messages to see if the next is
complete.
The downside is that we pay one more copy of the message data in the common
case. This is only during connection setup, so I think it's worth the
simplicity. (If we want to optimize later, we could either tighten
ssl3_get_message's interface to allow the handshake data being in the
hm_fragment's backing store rather than s->init_buf or swap out s->init_buf
with the hm_fragment's backing store when a mesasge completes.
This CL does not address ssl_read_bytes being an inappropriate API for DTLS.
Future work will revise the handshake/transport boundary to align better with
DTLS's needs. Also other problems that I've left as TODOs.
Change-Id: Ib4570d45634b5181ecf192894d735e8699b1c86b
Reviewed-on: https://boringssl-review.googlesource.com/3764
Reviewed-by: Adam Langley <agl@google.com>
It happens to give the same value anyway (64 + 16), but only on accident.
Change-Id: I1415f4015e3de472dbeb9ada0d92607c9d1bcd40
Reviewed-on: https://boringssl-review.googlesource.com/3780
Reviewed-by: Adam Langley <agl@google.com>
This transcription bug comes from the start of BoringSSL and, as you can
imagine, was a complete delight to track down.
Change-Id: I3051934195098a1d3bf893b154389ec7f14d3609
Reviewed-on: https://boringssl-review.googlesource.com/3740
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
Instead, add a separate init_with_direction hook. Normal AEADs ignore the
direction, while legacy AEADs must be initialized with it. This avoids
maintaining extra state to support the delayed initialization.
Change-Id: I25271f0e56ee2783a2fd4d4026434154d58dc0a8
Reviewed-on: https://boringssl-review.googlesource.com/3731
Reviewed-by: Adam Langley <agl@google.com>
There's no good reason to do this, and it doesn't work; HMAC checks the length
of the key and runs it through the hash function if too long. The reuse occurs
after this check.
This allows us to shave 132 bytes off HMAC_CTX as this was the only reason it
ever stored the original key. It also slightly simplifies HMAC_Init_ex's
logic.
Change-Id: Ib56aabc3630b7178f1ee7c38ef6370c9638efbab
Reviewed-on: https://boringssl-review.googlesource.com/3733
Reviewed-by: Adam Langley <agl@google.com>
(There are times when I actually miss C++ templates.)
Change-Id: I3db56e4946ae4fb919105fa33e2cfce3c7542d37
Reviewed-on: https://boringssl-review.googlesource.com/3700
Reviewed-by: Adam Langley <agl@google.com>
Change-Id: I7b6acc9004beb7b7090de1837814ccdff2e9930e
Reviewed-on: https://boringssl-review.googlesource.com/3680
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
EC_GROUP_copy is an rather unfriendly function; it doesn't work if the groups
have different[*] underlying EC_METHODs, but this notion is not exposed through
the API. I found no callers of EC_GROUP_copy in external code.
This leaves the precompute_mult functions as the remaining mutable API exposed
through EC_GROUP.
[*] Though, of the two EC_METHODs right now, simple.c is entirely unused.
Change-Id: Iabb52518005250fb970e12b3b0ea78b4f6eff4a0
Reviewed-on: https://boringssl-review.googlesource.com/3631
Reviewed-by: Adam Langley <agl@google.com>
Test both asynchronous and synchronous versions. This callback is somewhat
different from others. It's NOT called a second time when the handshake is
resumed. This appears to be intentional and not a mismerge from the internal
patch. The caller is expected to set up any state before resuming the handshake
state machine.
Also test the early callback returning an error.
Change-Id: If5e6eddd7007ea5cdd7533b4238e456106b95cbd
Reviewed-on: https://boringssl-review.googlesource.com/3590
Reviewed-by: Adam Langley <agl@google.com>
(I got this wrong when reading the OpenSSL code.)
Change-Id: Ib289ef41d0ab5a3157ad8b9454d2de96d1f86c22
Reviewed-on: https://boringssl-review.googlesource.com/3620
Reviewed-by: Adam Langley <agl@google.com>
There is exactly one implementation and it doesn't fail. Plus a cleanup
function that can fail is very bad manners; the caller has no choice but to
leak at that point.
Change-Id: I5b524617ef37bc7d92273472fa742416ea7dfd43
Reviewed-on: https://boringssl-review.googlesource.com/3564
Reviewed-by: Adam Langley <agl@google.com>
RC4_CHAR is a bit in the x86(-64) CPUID information that switches the
RC4 asm code from using an array of 256 uint32_t's to 256 uint8_t's. It
was originally written for the P4, where the uint8_t style was faster.
(On modern chips, setting RC4_CHAR took RC4-MD5 from 458 to 304 MB/s.
Although I wonder whether, on a server with many connections, using less
cache wouldn't be better.)
However, I'm not too worried about a slowdown of RC4 on P4 systems these
days (the last new P4 chip was released nine years ago) and I want the
code to be simplier.
Also, RC4_CHAR was set when the CPUID family was 15, but Intel actually
lists 15 as a special code meaning "also check the extended family
bits", which the asm didn't do.
The RC4_CHAR support remains in the RC4 asm code to avoid drift with
upstream.
Change-Id: If3febc925a83a76f453b9e9f8de5ee43759927c6
Reviewed-on: https://boringssl-review.googlesource.com/3550
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
(Which is just an exported wrapper around ssl3_get_cipher_by_value.)
Change-Id: Ibba166015ce59e337ff50963ba20237ac4949aaf
Reviewed-on: https://boringssl-review.googlesource.com/3543
Reviewed-by: Adam Langley <agl@google.com>
Upstream settled in this API, and it's also the one that we expect
internally and that third_party code will expect.
Change-Id: Id7af68cf0af1f2e4d9defd37bda2218d70e2aa7b
Reviewed-on: https://boringssl-review.googlesource.com/3542
Reviewed-by: Adam Langley <agl@google.com>
It was a mistake to remove this in the first place.
Change-Id: Icd97b4db01e49151daa41dd892f9da573ddc2842
Reviewed-on: https://boringssl-review.googlesource.com/3541
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
This empty header file exists only to make older code compile. But I
named it incorrectly! Upstream doesn't have the underscore in the name.
Change-Id: I96654b7e17d84a5f2810e6eb20fe7bfb22f855fd
Reviewed-on: https://boringssl-review.googlesource.com/3540
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
David Benjamin
Adam Langley
Brian Smith
Adam Langley