The original OpenSSL implementation did the same. M_ASN1_D2I_Finish checks
this. Forwards compatibility with future sessions with unknown fields is
probably not desirable.
Change-Id: I116a8c482cbcc47c3fcc31515c4a3718f66cf268
Reviewed-on: https://boringssl-review.googlesource.com/4941
Reviewed-by: Adam Langley <agl@google.com>
At some point we might need to make this defined by the consumer.
BUG=495146
Change-Id: Iedac305f234cb383799a5afc14046cd10fb3256a
Reviewed-on: https://boringssl-review.googlesource.com/4963
Reviewed-by: Adam Langley <agl@google.com>
9a41d1b946 broke handling of multiple records in
a single packet. If |extend| is true, not all of the previous packet should be
consumed, only up to the record length.
Add a test which stresses the DTLS stack's handling of multiple handshake
fragments in a handshake record and multiple handshake records in a packet.
Change-Id: I96571098ad9001e96440501c4730325227b155b8
Reviewed-on: https://boringssl-review.googlesource.com/4950
Reviewed-by: Adam Langley <agl@google.com>
bn_test's output is meant to be piped to bc, but this got broken somewhat:
- OpenSSL uses uppercase hex rather than BoringSSL's lowercase. bc only accepts
uppercase. Document that this needs some shell pipeline until we replace
them with better tests because this is all ridiculous.
- Some stderr outputs moved to stdout to avoid cluttering stdout. Just remove
them. The operations are fast enough to not need progress.
- To cut down on noise, only write the bc transcript given a command-line flag.
Also remove the -results flag since it's pointless. (It writes only the
results and not the inputs.)
Change-Id: I08f87cac1e03fab461f0dc40b9d4285bd877807d
Reviewed-on: https://boringssl-review.googlesource.com/4896
Reviewed-by: Adam Langley <agl@google.com>
While this isn't really an issue, don't use the a - b comparator pattern since
it doesn't account for overflows. (They'll also break silently if that field
ever becomes unsigned as it should be.)
Change-Id: I613d19df6e4a785efd4cffd46e8b03dbc95b98e2
Reviewed-on: https://boringssl-review.googlesource.com/4890
Reviewed-by: Adam Langley <agl@google.com>
These defines are part of the the locking callbacks which have been
removed. However, code that still tries to provide locking callbacks
will need these values to compile.
The locking callback that such code tries to install will be ignored,
but that's harmless since BoringSSL handles locking itself now.
Change-Id: Ic84da8b52020ccd3ecc8913b4e41d366690c7649
Android needs to be able to read a PKCS#7 blob from a Java
InputStream. This change adds |BIO_read_asn1| which reads a single
ASN.1 object from the start of a BIO without overreading.
Change-Id: I74776e686529c8e58af1c26a4909f9bd4e87b707
If BN_rand is called with |bits| set to 1 and |top| set to 1 then a 1 byte
buffer overflow can occur.
See also upstream's efee575ad464bfb60bf72dcb73f9b51768f4b1a1. But rather than
making |BN_rand| fail, be consistent with the |bits| = 0 case and just don't
set the bits that don't exist. Add tests to ensure the degenerate cases behave.
Change-Id: I5e9fbe6fd8f7f7b2e011a680f2fbe6d7ed4dab65
Reviewed-on: https://boringssl-review.googlesource.com/4893
Reviewed-by: Adam Langley <agl@google.com>
The functions BN_rshift and BN_lshift shift their arguments to the right or
left by a specified number of bits. Unpredicatable results (including
crashes) can occur if a negative number is supplied for the shift value.
Thanks to Mateusz Kocielski (LogicalTrust), Marek Kroemeke and Filip Palian
for discovering and reporting this issue.
(Imported from upstream's 7cc18d8158b5fc2676393d99b51c30c135502107.)
Change-Id: Ib9f5e410a46df3d7f02a61374807fba209612bd3
Reviewed-on: https://boringssl-review.googlesource.com/4892
Reviewed-by: Adam Langley <agl@google.com>
See upstream's 344c271eb339fc2982e9a3584a94e51112d84584. We had the error check
already. But, for consistency with the rest of that function's error paths,
pushing an error on the error queue would be prudent.
Change-Id: I8b702abc679dc94dffa79c19a9b7c3d0adc0638b
Reviewed-on: https://boringssl-review.googlesource.com/4889
Reviewed-by: Adam Langley <agl@google.com>
See also upstream's dab18ab596acb35eff2545643e25757e4f9cd777. This allows us to
add an assertion to the finished computation that the handshake buffer has
already been released.
BUG=492371
Change-Id: I8f15c618c8b2c70bfe583c81644d9dbea95519d4
Reviewed-on: https://boringssl-review.googlesource.com/4887
Reviewed-by: Adam Langley <agl@google.com>
This allows us to merge two of the ssl3_digest_cached_records calls which were
almost, but not completely, redundant. Also catches a missing case: the buffer
may be discarded if doing session resumption but otherwise enabling client
authentication.
BUG=492371
Change-Id: I78e9a4a9cca665e89899ef97b815454c6f5c7e02
Reviewed-on: https://boringssl-review.googlesource.com/4885
Reviewed-by: Adam Langley <agl@google.com>
Servers can no longer renegotiate.
Change-Id: Id79d5753562e29d2872871f4f571552a019215fa
Reviewed-on: https://boringssl-review.googlesource.com/4884
Reviewed-by: Adam Langley <agl@google.com>
This is documented as "Only request a client certificate on the initial TLS/SSL
handshake. Do not ask for a client certificate again in case of a
renegotiation." Server-side renegotiation is gone.
I'm not sure this flag has ever worked anyway, dating all the way back to
SSLeay 0.8.1b. ssl_get_new_session overwrites s->session, so the old
session->peer is lost.
Change-Id: Ie173243e189c63272c368a55167b8596494fd59c
Reviewed-on: https://boringssl-review.googlesource.com/4883
Reviewed-by: Adam Langley <agl@google.com>
(obj_dat.h and obj_mac.h are generated from the objects.txt change.)
See upstream's 3c161d081e2d30549e787437d05ffa08122a5114. Also see upstream's
12048657a91b12e499d03ec9ff406b42aba67366 to give zlib a better comment.
Change-Id: I86937f037f8e0f6179ba8072ccd972eca773c7ce
Reviewed-on: https://boringssl-review.googlesource.com/4882
Reviewed-by: Adam Langley <agl@google.com>
Never send the time as a client. Always send it as a server.
Change-Id: I20c55078cfe199d53dc002f6ee5dd57060b086d5
Reviewed-on: https://boringssl-review.googlesource.com/4829
Reviewed-by: Adam Langley <agl@google.com>
Support is spotty enough with compiler/library mismatches, and this doesn't
leak to public headers. It's probably simplest to just have consumers supply
it as a build flag.
BUG=491808
Change-Id: I0576a0514a266ee90d644317ae0f49cdddbafd1d
Reviewed-on: https://boringssl-review.googlesource.com/4880
Reviewed-by: Yoshisato Yanagisawa <yyanagisawa@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
This reverts commit e60e2a483b. Turns out we do
still use clock_gettime in speed.cc.
Change-Id: Idab42ef2863345c3d1409b5d33c3e36b41739e1f
Reviewed-on: https://boringssl-review.googlesource.com/4894
Reviewed-by: Adam Langley <agl@google.com>
Yes, OpenSSL lets you randomly change its internal state. This is used
as part of server-side renegotiation. Server-side renegotiation is gone.
BUG=429450
Change-Id: Ic1b013705734357acf64e8bf89a051b2b7521c64
Reviewed-on: https://boringssl-review.googlesource.com/4828
Reviewed-by: Adam Langley <agl@google.com>
They were added to avoid accidentally enabling renego for a consumer which set
them to zero to break the handshake on renego. Now that renego is off by
default, we can get rid of them again.
Change-Id: I2cc3bf567c55c6562352446a36f2b5af37f519ba
Reviewed-on: https://boringssl-review.googlesource.com/4827
Reviewed-by: Adam Langley <agl@google.com>
It's never called and the state is meaningless now.
Change-Id: I5429ec3eb7dc2b789c0584ea88323f0ff18920ae
Reviewed-on: https://boringssl-review.googlesource.com/4826
Reviewed-by: Adam Langley <agl@google.com>
When the peer or caller requests a renegotiation, OpenSSL doesn't
renegotiate immediately. It sets a flag to begin a renegotiation as soon
as record-layer read and write buffers are clear. One reason is that
OpenSSL's record layer cannot write a handshake record while an
application data record is being written. The buffer consistency checks
around partial writes will break.
None of these cases are relevant for the client auth hack. We already
require that renego come in at a quiescent part of the application
protocol by forbidding handshake/app_data interleave.
The new behavior is now: when a HelloRequest comes in, if the record
layer is not idle, the renegotiation is rejected as if
SSL_set_reject_peer_renegotiations were set. Otherwise we immediately
begin the new handshake. The server may not send any application data
between HelloRequest and completing the handshake. The HelloRequest may
not be consumed if an SSL_write is pending.
Note this does require that Chromium's HTTP stack not attempt to read
the HTTP response until the request has been written, but the
renegotiation logic already assumes it. Were Chromium to drive the
SSL_read state machine early and the server, say, sent a HelloRequest
after reading the request headers but before we've sent the whole POST
body, the SSL state machine may racily enter renegotiate early, block
writing the POST body on the new handshake, which would break Chromium's
ERR_SSL_CLIENT_AUTH_CERT_NEEDED plumbing.
BUG=429450
Change-Id: I6278240c3bceb5d2e1a2195bdb62dd9e0f4df718
Reviewed-on: https://boringssl-review.googlesource.com/4825
Reviewed-by: Adam Langley <agl@google.com>
The only case where renego is supported is if we are a client and the
server sends a HelloRequest. That is still needed to support the renego
+ client auth hack in Chrome. Beyond that, no other forms of renego will
work.
The messy logic where the handshake loop is repurposed to send
HelloRequest and the extremely confusing tri-state s->renegotiate (which
makes SSL_renegotiate_pending a lie during the initial handshake as a
server) are now gone. The next change will further simplify things by
removing ssl->s3->renegotiate and the renego deferral logic. There's
also some server-only renegotiation checks that can go now.
Also clean up ssl3_read_bytes' HelloRequest handling. The old logic relied on
the handshake state machine to reject bad HelloRequests which... actually that
code probably lets you initiate renego by sending the first four bytes of a
ServerHello and expecting the peer to read it later.
BUG=429450
Change-Id: Ie0f87d0c2b94e13811fe8e22e810ab2ffc8efa6c
Reviewed-on: https://boringssl-review.googlesource.com/4824
Reviewed-by: Adam Langley <agl@google.com>
With NO_ASM defined, the recent AEAD changes broke the tests. The
problem is that the generic CBC mode code tests whether in != out and
omits to save the IV, assuming that it'll be able to read the old
ciphertext block.
However, consider the case where out = in - 16:
1 2 3 4
|-------|-------|------|-------|
^ ^
| |
out in
First time around, 1 = decrypt(2) ^ iv and everything is fine, because
the IV was preconfigured. However, the next iteration of the loop sets
2 = decrypt(3) and tries to XOR it with the contents of the previous
ciphertext block… from 2.
Change-Id: Ibabff430704fad246de132b4d6d514f6a0362734
This dates back to upstream's a2a0158959e597188c10fbfeaf61888b2df2e587.
It seems to be a remnant of those SSL_clear calls in the handshake state
machine which... were also bizarre and since gone.
Since SSL_clear is to drop the current connection but retain the
configuration, it doesn't really make sense to forbid it while you're
mid-handshake.
This removes another consumer of s->renegotiate.
BUG=429450
Change-Id: Ifac6bf11644447fd5571262bed7421684739bc39
Reviewed-on: https://boringssl-review.googlesource.com/4823
Reviewed-by: Adam Langley <agl@google.com>
ssl_cipher_list_to_bytes is client-only, so s->renegotiate worked, but
the only reason the other two worked is because s->renegotiate isn't a
lie on the server before ServerHello.
BUG=429450
Change-Id: If68a986c6ec4a0f16e57a6187238e05b50ecedfc
Reviewed-on: https://boringssl-review.googlesource.com/4822
Reviewed-by: Adam Langley <agl@google.com>
Now that WebRTC honors packet boundaries (https://crbug.com/447431), we
can start enforcing them correctly. Configuring read-ahead now does
nothing. Instead DTLS will always set "read-ahead" and also correctly
enforce packet boundaries when reading records. Add tests to ensure that
badly fragmented packets are ignored. Because such packets don't fail
the handshake, the tests work by injecting an alert in the front of the
handshake stream and ensuring the DTLS implementation ignores them.
ssl3_read_n can be be considerably unraveled now, but leave that for
future cleanup. For now, make it correct.
BUG=468889
Change-Id: I800cfabe06615af31c2ccece436ca52aed9fe899
Reviewed-on: https://boringssl-review.googlesource.com/4820
Reviewed-by: Adam Langley <agl@google.com>
This isn't exhaustive. There are still failures in some tests which probably
ought to get C++'d first.
Change-Id: Iac58df9d98cdfd94603d54374a531b2559df64c3
Reviewed-on: https://boringssl-review.googlesource.com/4795
Reviewed-by: Adam Langley <agl@google.com>
Currently far from passing and I haven't even tried with a leak checker yet.
Also bn_test is slow.
Change-Id: I4fe2783aa5f7897839ca846062ae7e4a367d2469
Reviewed-on: https://boringssl-review.googlesource.com/4794
Reviewed-by: Adam Langley <agl@google.com>
This is considerably less scary than swapping out connection state. It also
fixes a minor bug where, if dtls1_do_write had an alert to dispatch and we
happened to retry during a rexmit, it would use the wrong epoch.
BUG=468889
Change-Id: I754b0d46bfd02f797f4c3f7cfde28d3e5f30c52b
Reviewed-on: https://boringssl-review.googlesource.com/4793
Reviewed-by: Adam Langley <agl@google.com>
tls1_enc is now SSL_AEAD_CTX_{open,seal}. This starts tidying up a bit
of the record-layer logic. This removes rr->input, as encrypting and
decrypting records no longer refers to various globals. It also removes
wrec altogether. SSL3_RECORD is now only used to maintain state about
the current incoming record. Outgoing records go straight to the write
buffer.
This also removes the outgoing alignment memcpy and simply calls
SSL_AEAD_CTX_seal with the parameters as appropriate. From bssl speed
tests, this seems to be faster on non-ARM and a bit of a wash on ARM.
Later it may be worth recasting these open/seal functions to write into
a CBB (tweaked so it can be malloc-averse), but for now they take an
out/out_len/max_out trio like their EVP_AEAD counterparts.
BUG=468889
Change-Id: Ie9266a818cc053f695d35ef611fd74c5d4def6c3
Reviewed-on: https://boringssl-review.googlesource.com/4792
Reviewed-by: Adam Langley <agl@google.com>
(This makes it possible to include opensslv.h when not linking SSL.)
Change-Id: Id88c5ff44a7099d33d8d4672f7ba88986ffd1526
Reviewed-on: https://boringssl-review.googlesource.com/4831
Reviewed-by: Adam Langley <agl@google.com>
SSL3_VERSION_MAJOR is the only MAJOR/MINOR number used internally or
externally.
Change-Id: I3f17175e73fd89887665accf1bfa680581f42dfe
Reviewed-on: https://boringssl-review.googlesource.com/4790
Reviewed-by: Adam Langley <agl@google.com>
Chromium's session cache has since been rewritten and no longer needs to
muck with those functions in tests.
Change-Id: I2defad81513210dca5e105757e04cbb677583251
Reviewed-on: https://boringssl-review.googlesource.com/4788
Reviewed-by: Adam Langley <agl@google.com>
One of these days we may need to get a more aggressive C parser...
Change-Id: I7c6a848fb3b7f41083ac70542aa17e971baf10a4
Reviewed-on: https://boringssl-review.googlesource.com/4786
Reviewed-by: Adam Langley <agl@google.com>
Fleshes out the table of contents more.
Change-Id: I8f8f0e43bdf7419f978b4fc66de80922ed1ae425
Reviewed-on: https://boringssl-review.googlesource.com/4785
Reviewed-by: Adam Langley <agl@google.com>
Current thought is to organize this by:
- Core SSL_CTX APIs (creating, destroying)
- Core SSL APIs (creating destroying, maybe handshake, read, write as
well)
- APIs to configure SSL_CTX/SSL, roughly grouped by feature. Probably
options and modes are the first two sections. SSL_TXT_* constants can
be part of documenting cipher suite configuration.
- APIs to query state from SSL_CTX/SSL, roughly grouped by feature. (Or
perhaps these should be folded into the configuration sections?)
The functions themselves aren't reordered or reorganized to match the
eventual header order yet. Though I did do the s -> ssl rename on the
ones I've touched.
Also formally deprecate SSL_clear. It would be a core SSL API
except it's horrible.
Change-Id: Ia7e4fdcb7bad4e9ccdee8cf8c3136dc63aaaa772
Reviewed-on: https://boringssl-review.googlesource.com/4784
Reviewed-by: Adam Langley <agl@google.com>
The type names are perfectly serviceable. Most of them are
forward-declared in base.h.
Change-Id: Id03f5039a2d1bab82c68ade074a0e26cd3ab5ad9
Reviewed-on: https://boringssl-review.googlesource.com/4783
Reviewed-by: Adam Langley <agl@google.com>
