This explicitly forbids an API pattern which formerly kind of worked, but was
extremely buggy (see preceding commits). Depending on how one interprets
close_notify and our API, one might wish to call SSL_shutdown only once
(morally shutdown(SHUT_WR)) and then SSL_read until EOF.
However, this exposes additional confusing states where we might try to send an
alert post-SHUT_WR, etc. Early commits made us more robust here (whether one is
allowed to touch the SSL* after an operattion failed because it read an alert
is... unclear), so we could support it if we wanted to, but this doesn't seem
worth the additional statespace. See if we can get away with not allowing it.
Change-Id: Ie7a7e5520b464360b1e6316c34ec9854b571782f
Reviewed-on: https://boringssl-review.googlesource.com/7433
Reviewed-by: David Benjamin <davidben@google.com>
The existing logic gets confused in a number of cases around close_notify vs.
fatal alert. SSL_shutdown, while still pushing to the error queue, will fail to
notice alerts. We also get confused if we try to send a fatal alert when we've
already sent something else.
Change-Id: I9b1d217fbf1ee8a9c59efbebba60165b7de9689e
Reviewed-on: https://boringssl-review.googlesource.com/7952
Reviewed-by: David Benjamin <davidben@google.com>
SSL_RECEIVED_SHUTDOWN checks in the record layer happen in two different
places. Some operations (but not all) check it, and so does read_bytes. Move it
to get_record.
This check should be at a low-level since it is otherwise duplicated in every
operation. It is also a signal which originates from around the peer's record
layer, so it makes sense to check it near the same code. (This one's in
get_record which is technically lower-level than read_bytes, but we're trying
to get rid of read_bytes. They're very coupled functions.)
Also, if we've seen a fatal alert, replay an error, not an EOF.
Change-Id: Idec35c5068ddabe5b1a9145016d8f945da2421cf
Reviewed-on: https://boringssl-review.googlesource.com/7436
Reviewed-by: David Benjamin <davidben@google.com>
This allows an application to override the default of 1 second, which
is what's instructed in RFC 6347 but is not an absolute requirement.
Change-Id: I0bbb16e31990fbcab44a29325b6ec7757d5789e5
Reviewed-on: https://boringssl-review.googlesource.com/7930
Reviewed-by: David Benjamin <davidben@google.com>
Having bbio be tri-state (not allocated, allocated but not active, and
allocated and active) is confusing.
The extra state is only used in the client handshake, where ClientHello is
special-cased to not go through the buffer while everything else is. This dates
to OpenSSL's initial commit and doesn't seem to do much. I do not believe it
can affect renego as the buffer only affects writes; although OpenSSL accepted
interleave on read (though this logic predates it slightly), it never sent
application data while it believed a handshake was active. The handshake would
always be driven to completion first.
My guess is this was to save a copy since the ClientHello is a one-message
flight so it wouldn't need to be buffered? This is probably not worth the extra
variation in the state. (Especially with the DTLS state machine going through
ClientHello twice and pushing the BIO in between the two. Though I suspect that
was a mistake in itself. If the optimization guess is correct, there was no
need to do that.)
Change-Id: I6726f866e16ee7213cab0c3e6abb133981444d47
Reviewed-on: https://boringssl-review.googlesource.com/7873
Reviewed-by: Adam Langley <agl@google.com>
The DTLS bbio logic is rather problematic, but this shouldn't make things
worse. In the in-handshake case, the new code merges the per-message
(unchecked) BIO_flush calls into one call at the end but otherwise the BIO is
treated as is. Otherwise any behavior around non-block writes should be
preserved.
In the post-handshake case, we now install the buffer when we didn't
previously. On write error, the buffer will have garbage in it, but it will be
discarded, so that will preserve any existing retry behavior. (Arguably the
existing retry behavior is a bug, but that's another matter.)
Add a test for all this, otherwise it is sure to regress. Testing for
record-packing is a little fuzzy, but we can assert ChangeCipherSpec always
shares a record with something.
BUG=57
Change-Id: I8603f20811d502c71ded2943b0e72a8bdc4e46f2
Reviewed-on: https://boringssl-review.googlesource.com/7871
Reviewed-by: Adam Langley <agl@google.com>
The logic is a little hairy, partly because we used to support multiple
certificate slots.
Change-Id: Iee8503e61f5e0e91b7bcb15f526e9ef7cc7ad860
Reviewed-on: https://boringssl-review.googlesource.com/7823
Reviewed-by: David Benjamin <davidben@google.com>
We reset it to SSL_NOTHING at the start of ever SSL_get_error-using operation.
Then we only set it to a non-NOTHING value in the rest of the stack on error
paths.
Currently, ssl->rwstate is set all over the place. Sometimes the pattern is:
ssl->rwstate = SSL_WRITING;
if (BIO_write(...) <= 0) {
goto err;
}
ssl->rwstate = SSL_NOTHING;
Sometimes we only set it to the non-NOTHING value on error.
if (BIO_write(...) <= 0) {
ssl->rwstate = SSL_WRITING;
}
ssl->rwstate = SSL_NOTHING;
Sometimes we just set it to SSL_NOTHING far from any callback in random places.
The third case is arbitrary and clearly should be removed.
But, in the second case, we sometimes forget to undo it afterwards. This is
largely harmless since an error in the error queue overrides rwstate, but we
don't always put something in the error queue (falling back to
SSL_ERROR_SYSCALL for "I'm not sure why it failed. Perhaps it was one of your
callbacks? Check your errno equivalent."), but in that case a stray rwstate
value will cause it to be wrong.
We could fix the cases where we fail to set SSL_NOTHING on success cases, but
this doesn't account for there being multiple SSL_get_error operations. The
consumer may have an SSL_read and an SSL_write running concurrently. Instead,
it seems the best option is to lift the SSL_NOTHING reset to the operations and
set SSL_WRITING and friends as in the second case.
(Someday hopefully we can fix this to just be an enum that is internally
returned. It can convert to something stateful at the API layer.)
Change-Id: I54665ec066a64eb0e48a06e2fcd0d2681a42df7f
Reviewed-on: https://boringssl-review.googlesource.com/7453
Reviewed-by: David Benjamin <davidben@google.com>
A lot of consumers of obj.h only want the NID values. Others didn't need
it at all. This also removes some OBJ_nid2sn and OBJ_nid2ln calls in EVP
error paths which isn't worth pulling a large table in for.
BUG=chromium:499653
Change-Id: Id6dff578f993012e35b740a13b8e4f9c2edc0744
Reviewed-on: https://boringssl-review.googlesource.com/7563
Reviewed-by: David Benjamin <davidben@google.com>
This removes the final use of in_handshake. Note that there is still a
rentrant call of read_bytes -> handshake_func when we see a
HelloRequest. That will need to be signaled up to ssl_read_impl
separately out of read_app_data.
Change-Id: I823de243f75e6b73eb40c6cf44157b4fc21eb8fb
Reviewed-on: https://boringssl-review.googlesource.com/7439
Reviewed-by: David Benjamin <davidben@google.com>
This removes one use of in_handshake and consolidates some DTLS and TLS
code.
Change-Id: Ibbdd38360a983dabfb7b18c7bd59cb5e316b2adb
Reviewed-on: https://boringssl-review.googlesource.com/7435
Reviewed-by: David Benjamin <davidben@google.com>
fatal_alert isn't read at all right now, and warn_alert is only checked
for close_notify. We only need three states:
- Not shutdown.
- Got a fatal alert (don't care which).
- Got a warning close_notify.
Leave ssl->shutdown alone for now as it's tied up with SSL_set_shutdown
and friends. To distinguish the remaining two, we only need a boolean.
Change-Id: I5877723af82b76965c75cefd67ec1f981242281b
Reviewed-on: https://boringssl-review.googlesource.com/7434
Reviewed-by: David Benjamin <davidben@google.com>
Most code already dereferences it directly.
Change-Id: I227fa91ecbf25a19077f7cfba21b0abd2bc2bd1d
Reviewed-on: https://boringssl-review.googlesource.com/7422
Reviewed-by: David Benjamin <davidben@google.com>
Change-Id: I6267c9bfb66940d0b6fe5368514210a058ebd3cc
Reviewed-on: https://boringssl-review.googlesource.com/7494
Reviewed-by: Emily Stark (Dunn) <estark@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
OpenSSL historically made some poor API decisions. Rather than returning a
status enum in SSL_read, etc., these functions must be paired with
SSL_get_error which determines the cause of the last error's failure. This
requires SSL_read communicate with SSL_get_error with some stateful flag,
rwstate.
Further, probably as workarounds for bugs elsewhere, SSL_get_error does not
trust rwstate. Among other quirks, if the error queue is non-empty,
SSL_get_error overrides rwstate and returns a value based on that. This
requires that SSL_read, etc., be called with an empty error queue. (Or we hit
one of the spurious ERR_clear_error calls in the handshake state machine,
likely added as further self-workarounds.)
Since requiring callers consistently clear the error queue everywhere is
unreasonable (crbug.com/567501), clear ERR_clear_error *once* at the entry
point. Until/unless[*] we make SSL_get_error sane, this is the most reasonable
way to get to the point that clearing the error queue on error is optional.
With those in place, the calls in the handshake state machine are no longer
needed. (I suspect all the ERR_clear_system_error calls can also go, but I'll
investigate and think about that separately.)
[*] I'm not even sure it's possible anymore, thanks to the possibility of
BIO_write pushing to the error queue.
BUG=567501,593963
Change-Id: I564ace199e5a4a74b2554ad3335e99cd17120741
Reviewed-on: https://boringssl-review.googlesource.com/7455
Reviewed-by: Steven Valdez <svaldez@google.com>
Reviewed-by: David Benjamin <davidben@google.com>
In OpenSSL, they create socket BIOs. The distinction isn't important on UNIX.
On Windows, file descriptors are provided by the C runtime, while sockets must
use separate recv and send APIs. Document how these APIs are intended to work.
Also add a TODO to resolve the SOCKET vs int thing. This code assumes that
Windows HANDLEs only use the bottom 32 bits of precision. (Which is currently
true and probably will continue to be true for the foreseeable future[*], but
it'd be nice to do this right.)
Thanks to Gisle Vanem and Daniel Stenberg for reporting the bug.
[*] Both so Windows can continue to run 32-bit programs and because of all the
random UNIX software, like OpenSSL and ourselves, out there which happily
assumes sockets are ints.
Change-Id: I67408c218572228cb1a7d269892513cda4261c82
Reviewed-on: https://boringssl-review.googlesource.com/7333
Reviewed-by: David Benjamin <davidben@google.com>
Node.js calls it but handles it failing. Since we have abstracted this
in the state machine, we mightn't even be using a cipher suite where the
server's key can be expressed as an EVP_PKEY.
Change-Id: Ic3f013dc9bcd7170a9eb2c7535378d478b985849
Reviewed-on: https://boringssl-review.googlesource.com/7272
Reviewed-by: David Benjamin <davidben@google.com>
Sending close_notify during init causes some problems for some
applications so we instead revert to the previous behavior returning an
error instead of silently passing.
(Imported from upstream's 64193c8218540499984cd63cda41f3cd491f3f59)
Change-Id: I5efed1ce152197d291e6c7ece6e5dbb8f3ad867d
Reviewed-on: https://boringssl-review.googlesource.com/7232
Reviewed-by: David Benjamin <davidben@google.com>
This stub returns an empty string rather than NULL (since some callers
might assume that NULL means there are no shared ciphers).
Change-Id: I9537fa0a80c76559b293d8518599b68fd9977dd8
Reviewed-on: https://boringssl-review.googlesource.com/7196
Reviewed-by: David Benjamin <davidben@google.com>
Calling SSL_shutdown while in init previously gave a "1" response,
meaning everything was successfully closed down (even though it
wasn't). Better is to send our close_notify, but fail when trying to
receive one.
The problem with doing a shutdown while in the middle of a handshake
is that once our close_notify is sent we shouldn't really do anything
else (including process handshake/CCS messages) until we've received a
close_notify back from the peer. However the peer might send a CCS
before acting on our close_notify - so we won't be able to read it
because we're not acting on CCS messages!
(Imported from upstream's f73c737c7ac908c5d6407c419769123392a3b0a9)
Change-Id: Iaad5c5e38983456d3697c955522a89919628024b
Reviewed-on: https://boringssl-review.googlesource.com/7207
Reviewed-by: David Benjamin <davidben@google.com>
While it's always safe to read |SSL_MAX_SSL_SESSION_ID_LENGTH| bytes
from an |SSL_SESSION|'s |session_id| array, the hash function would do
so with without considering if all those bytes had been written to.
This change checks |session_id_length| before possibly reading
uninitialised memory. Since the result of the hash function was already
attacker controlled, and since a lookup of a short session ID will
always fail, it doesn't appear that this is anything more than a clean
up.
BUG=586800
Change-Id: I5f59f245b51477d6d4fa2cdc20d40bb6b4a3eae7
Reviewed-on: https://boringssl-review.googlesource.com/7150
Reviewed-by: David Benjamin <davidben@google.com>
I switched up the endianness. Add some tests to make sure those work right.
Also tweak the DTLS semantics. SSL_get_read_sequence should return the highest
sequence number received so far. Include the epoch number in both so we don't
need a second API for it.
Change-Id: I9901a1665b41224c46fadb7ce0b0881dcb466bcc
Reviewed-on: https://boringssl-review.googlesource.com/7141
Reviewed-by: Adam Langley <agl@google.com>
C has implicit conversion of |void *| to other pointer types so these
casts are unnecessary. Clean them up to make the code easier to read
and to make it easier to find dangerous casts.
Change-Id: I26988a672e8ed4d69c75cfbb284413999b475464
Reviewed-on: https://boringssl-review.googlesource.com/7102
Reviewed-by: David Benjamin <davidben@google.com>
OpenSSL 1.1.0 doesn't seem to have these two, so this isn't based on anything.
Have them return uint64_t in preparation for switching the internal
representation to uint64_t so ssl_record_sequence_update can go away.
Change-Id: I21d55e9a29861c992f409ed293e0930a7aaef7a3
Reviewed-on: https://boringssl-review.googlesource.com/6941
Reviewed-by: Adam Langley <alangley@gmail.com>
We have the hook on the SSL_CTX, but it should be possible to set it without
reaching into SSL_CTX.
Change-Id: I93db070c7c944be374543442a8de3ce655a28928
Reviewed-on: https://boringssl-review.googlesource.com/6880
Reviewed-by: Adam Langley <alangley@gmail.com>
Move it into ssl->s3 so it automatically behaves correctly on SSL_clear.
ssl->version is still a mess though.
Change-Id: I17a692a04a845886ec4f8de229fa6cf99fa7e24a
Reviewed-on: https://boringssl-review.googlesource.com/6844
Reviewed-by: Adam Langley <alangley@gmail.com>
This removes the various non-PRF checks from SSL3_ENC_METHOD so that can
have a clearer purpose. It also makes TLS 1.0 through 1.2's
SSL3_ENC_METHOD tables identical and gives us an assert to ensure
nothing accesses the version bits before version negotiation.
Accordingly, ssl_needs_record_splitting was reordered slightly so we
don't rely on enc_method being initialized to TLS 1.2
pre-version-negotiation.
This leaves alert_value as the only part of SSL3_ENC_METHOD which may be
accessed before version negotiation.
Change-Id: If9e299e2ef5511b5fa442b2af654eed054c3e675
Reviewed-on: https://boringssl-review.googlesource.com/6842
Reviewed-by: Adam Langley <alangley@gmail.com>
node.js is, effectively, another bindings library. However, it's better
written than most and, with these changes, only a couple of tiny fixes
are needed in node.js. Some of these changes are a little depressing
however so we'll need to push node.js to use APIs where possible.
Changes:
∙ Support verify_recover. This is very obscure and the motivation
appears to be https://github.com/nodejs/node/issues/477 – where it's
not clear that anyone understands what it means :(
∙ Add a few, no-op #defines
∙ Add some members to |SSL_CTX| and |SSL| – node.js needs to not
reach into these structs in the future.
∙ Add EC_get_builtin_curves.
∙ Add EVP_[CIPHER|MD]_do_all_sorted – these functions are limited to
decrepit.
Change-Id: I9a3566054260d6c4db9d430beb7c46cc970a9d46
Reviewed-on: https://boringssl-review.googlesource.com/6952
Reviewed-by: Adam Langley <agl@google.com>
Conscrypt needs to, in the certificate verification callback, know the key
exchange + auth method of the current cipher suite to pass into
X509TrustManager.checkServerTrusted. Currently it reaches into the struct to
get it. Add an API for this.
Change-Id: Ib4e0a1fbf1d9ea24e0114f760b7524e1f7bafe33
Reviewed-on: https://boringssl-review.googlesource.com/6881
Reviewed-by: David Benjamin <davidben@google.com>
We have need to normalize other versions during version negotiation, but
almost all will be post-negotiation. Hopefully later this can be
replaced with a value explicitly stored on the object and we do away
with ssl->version.
Change-Id: I595db9163d0af2e7c083b9a09310179aaa9ac812
Reviewed-on: https://boringssl-review.googlesource.com/6841
Reviewed-by: Adam Langley <alangley@gmail.com>
As things stand now, they don't actually do anything.
Change-Id: I9f8b4cbf38a0dffabfc5265805c52bb8d7a8fb0d
Reviewed-on: https://boringssl-review.googlesource.com/6837
Reviewed-by: Adam Langley <alangley@gmail.com>
Both are connection state rather than configuration state. Notably this
cuts down more of SSL_clear that can't just use ssl_free + ssl_new.
Change-Id: I3c05b3ae86d4db8bd75f1cd21656f57fc5b55ca9
Reviewed-on: https://boringssl-review.googlesource.com/6835
Reviewed-by: Adam Langley <alangley@gmail.com>
wpa_supplicant needs to get at the client and server random. OpenSSL
1.1.0 added these APIs, so match their semantics.
Change-Id: I2b71ba850ac63e574c9ea79012d1d0efec5a979a
Reviewed-on: https://boringssl-review.googlesource.com/6830
Reviewed-by: Adam Langley <alangley@gmail.com>
That we're half and half is really confusing.
Change-Id: I1c2632682e8a3e63d01dada8e0eb3b735ff709ce
Reviewed-on: https://boringssl-review.googlesource.com/6785
Reviewed-by: Adam Langley <agl@google.com>
The new curve is not enabled by default.
As EC_GROUP/EC_POINT is a bit too complex for X25519, this introduces an
SSL_ECDH_METHOD abstraction which wraps just the raw ECDH operation. It
also tidies up some of the curve code which kept converting back and
force between NIDs and curve IDs. Now everything transits as curve IDs
except for API entry points (SSL_set1_curves) which take NIDs. Those
convert immediately and act on curve IDs from then on.
Note that, like the Go implementation, this slightly tweaks the order of
operations. The client sees the server public key before sending its
own. To keep the abstraction simple, SSL_ECDH_METHOD expects to
generate a keypair before consuming the peer's public key. Instead, the
client handshake stashes the serialized peer public value and defers
parsing it until it comes time to send ClientKeyExchange. (This is
analogous to what it was doing before where it stashed the parsed peer
public value instead.)
It still uses TLS 1.2 terminology everywhere, but this abstraction should also
be compatible with TLS 1.3 which unifies (EC)DH-style key exchanges.
(Accordingly, this abstraction intentionally does not handle parsing the
ClientKeyExchange/ServerKeyExchange framing or attempt to handle asynchronous
plain RSA or the authentication bits.)
BUG=571231
Change-Id: Iba09dddee5bcdfeb2b70185308e8ab0632717932
Reviewed-on: https://boringssl-review.googlesource.com/6780
Reviewed-by: Adam Langley <agl@google.com>
Only ECDHE-based ciphers are implemented. To ease the transition, the
pre-standard cipher shares a name with the standard one. The cipher rule parser
is hacked up to match the name to both ciphers. From the perspective of the
cipher suite configuration language, there is only one cipher.
This does mean it is impossible to disable the old variant without a code
change, but this situation will be very short-lived, so this is fine.
Also take this opportunity to make the CK and TXT names align with convention.
Change-Id: Ie819819c55bce8ff58e533f1dbc8bef5af955c21
Reviewed-on: https://boringssl-review.googlesource.com/6686
Reviewed-by: Adam Langley <agl@google.com>
This callback is never used. The one caller I've ever seen is in Android
code which isn't built with BoringSSL and it was a no-op.
It also doesn't actually make much sense. A callback cannot reasonably
assume that it sees every, say, SSL_CTX created because the index may be
registered after the first SSL_CTX is created. Nor is there any point in
an EX_DATA consumer in one file knowing about an SSL_CTX created in
completely unrelated code.
Replace all the pointers with a typedef to int*. This will ensure code
which passes NULL or 0 continues to compile while breaking code which
passes an actual function.
This simplifies some object creation functions which now needn't worry
about CRYPTO_new_ex_data failing. (Also avoids bouncing on the lock, but
it's taking a read lock, so this doesn't really matter.)
BUG=391192
Change-Id: I02893883c6fa8693682075b7b130aa538a0a1437
Reviewed-on: https://boringssl-review.googlesource.com/6625
Reviewed-by: Adam Langley <agl@google.com>
Then deprecate the old functions. Thanks to upstream's
6977e8ee4a718a76351ba5275a9f0be4e530eab5 for the idea.
Change-Id: I916abd6fca2a3b2a439ec9902d9779707f7e41eb
Reviewed-on: https://boringssl-review.googlesource.com/6622
Reviewed-by: Adam Langley <agl@google.com>
It has no callers. I prepped for its removal earlier with
c05697c2c5
and then completely forgot.
Thanks to upstream's 6f78b9e824c053d062188578635c575017b587c5 for
the reminder. Quoth them:
> This only gets used to set a specific curve without actually checking
> that the peer supports it or not and can therefor result in handshake
> failures that can be avoided by selecting a different cipher.
It's also a very confusing API since it does NOT pass ownership of the
EC_KEY to the caller.
Change-Id: I6a00643b3a2d6746e9e0e228b47c2bc9694b0084
Reviewed-on: https://boringssl-review.googlesource.com/6621
Reviewed-by: Adam Langley <agl@google.com>
I don't think we're ever going to manage to enforce this, and it doesn't
seem worth the trouble. We don't support application protocols which use
renegotiation outside of the HTTP/1.1 mid-stream client auth hack.
There, it's on the server to reject legacy renegotiations.
This removes the last of SSL_OP_ALL.
Change-Id: I996fdeaabf175b6facb4f687436549c0d3bb0042
Reviewed-on: https://boringssl-review.googlesource.com/6580
Reviewed-by: Adam Langley <agl@google.com>
The keylog BIO is internally synchronized by the SSL_CTX lock, but an
application may wish to log keys from multiple SSL_CTXs. This is in
preparation for switching Chromium to use a separate SSL_CTX per profile
to more naturally split up the session caches.
It will also be useful for routing up SSLKEYLOGFILE in WebRTC. There,
each log line must be converted to an IPC up from the renderer
processes.
This will require changes in Chromium when we roll BoringSSL.
BUG=458365,webrtc:4417
Change-Id: I2945bdb4def0a9c36e751eab3d5b06c330d66b54
Reviewed-on: https://boringssl-review.googlesource.com/6514
Reviewed-by: Adam Langley <agl@google.com>
There seems to have been a merge error.
Change-Id: I72e5c2a45c148e31c90b28bedfff48f8ca6e3c8c
Reviewed-on: https://boringssl-review.googlesource.com/6455
Reviewed-by: Adam Langley <agl@google.com>
This exposes the ServerKeyExchange signature hash type used in the most recent
handshake, for histogramming on the client.
BUG=549662
Change-Id: I8a4e00ac735b1ecd2c2df824112c3a0bc62332a7
Reviewed-on: https://boringssl-review.googlesource.com/6413
Reviewed-by: Adam Langley <agl@google.com>
This function allows one to extract the current IVs from an SSL
connection. This is needed for the CBC cipher suites with implicit IVs
because, for those, the IV can't be extracted from the handshake key
material.
Change-Id: I247a1d0813b7a434b3cfc88db86d2fe8754344b6
Reviewed-on: https://boringssl-review.googlesource.com/6433
Reviewed-by: Adam Langley <agl@google.com>
This is a fairly timid, first step at trying to pack common structures a
little better.
This change reorders a couple of structures a little and turns some
variables into bit-fields. Much more can still be done.
Change-Id: Idbe0f54d66559c0ad654bf7e8dea277a771a568f
Reviewed-on: https://boringssl-review.googlesource.com/6394
Reviewed-by: Adam Langley <agl@google.com>
This change reduces unnecessary copying and makes the pre-RFC-7539
nonces 96 bits just like the AES-GCM, AES-CCM, and RFC 7539
ChaCha20-Poly1305 cipher suites. Also, all the symbols related to
the pre-RFC-7539 cipher suites now have "_OLD" appended, in
preparation for adding the RFC 7539 variants.
Change-Id: I1f85bd825b383c3134df0b6214266069ded029ae
Reviewed-on: https://boringssl-review.googlesource.com/6103
Reviewed-by: Adam Langley <alangley@gmail.com>
The internal session cache is keyed on session ID, so this is completely
useless for clients (indeed we never look it up internally). Along the way,
tidy up ssl_update_cache to be more readable. The slight behavior change is
that SSL_CTX_add_session's return code no longer controls the external
callback. It's not clear to me what that could have accomplished. (It can only
fail on allocation error. We only call it for new sessions, so the duplicate
case is impossible.)
The one thing of value the internal cache might have provided is managing the
timeout. The SSL_CTX_flush_sessions logic would flip the not_resumable bit and
cause us not to offer expired sessions (modulo SSL_CTX_flush_sessions's delay
and any discrepancies between the two caches). Instead, just check expiration
when deciding whether or not to offer a session.
This way clients that set SSL_SESS_CACHE_CLIENT blindly don't accidentally
consume gobs of memory.
BUG=531194
Change-Id: If97485beab21874f37737edc44df24e61ce23705
Reviewed-on: https://boringssl-review.googlesource.com/6321
Reviewed-by: Adam Langley <alangley@gmail.com>
A random 32-byte (so 256-bit) session ID is never going to collide with
an existing one. (And, if it does, SSL_CTX_add_session does account for
this, so the server won't explode. Just attempting to resume some
session will fail.)
That logic didn't completely work anyway as it didn't account for
external session caches or multiple connections picking the same ID in
parallel (generation and insertion happen at different times) or
multiple servers sharing one cache. In theory one could fix this by
passing in a sufficiently clever generate_session_id, but no one does
that.
I found no callers of these functions, so just remove them altogether.
Change-Id: I8500c592cf4676de6d7194d611b99e9e76f150a7
Reviewed-on: https://boringssl-review.googlesource.com/6318
Reviewed-by: Adam Langley <alangley@gmail.com>
Although Chromium actually uses SSL_(get_)state as part of its fallback
reason heuristic, that function really should go in the deprecated
bucket. I kept SSL_state_string_long since having a human-readable
string is probably useful for logging.
SSL_set_SSL_CTX was only half-documented as the behavior of this
function is very weird. This warrants further investigation and
rethinking.
SSL_set_shutdown is absurd. I added an assert to trip up clearing bits
and set it to a bitwise OR since clearing bits may mess up the state
machine. Otherwise there's enough consumers and it's not quite the same
as SSL_CTX_set_quiet_shutdown that I've left it alone for now.
Change-Id: Ie35850529373a5a795f6eb04222668ff76d84aaa
Reviewed-on: https://boringssl-review.googlesource.com/6312
Reviewed-by: Adam Langley <alangley@gmail.com>
SSL_in_connect_init and SSL_in_accept_init are removed as they're unused
both within the library and externally. They're also kind of silly.
Expand on how False Start works at the API level in doing so.
Change-Id: Id2a8e34b5bb8f28329e3b87b4c64d41be3f72410
Reviewed-on: https://boringssl-review.googlesource.com/6310
Reviewed-by: Adam Langley <alangley@gmail.com>
This callback is some combination of arguably useful stuff (bracket
handshakes, alerts) and completely insane things (find out when the
state machine advances). Deprecate the latter.
Change-Id: Ibea5b32cb360b767b0f45b302fd5f1fe17850593
Reviewed-on: https://boringssl-review.googlesource.com/6305
Reviewed-by: Adam Langley <alangley@gmail.com>
Also clean up the code slightly.
Change-Id: I066a389242c46cdc7d41b1ae9537c4b7716c92a2
Reviewed-on: https://boringssl-review.googlesource.com/6302
Reviewed-by: Adam Langley <alangley@gmail.com>
Now tls1.h is just a pile of protocol constants with no more circular
dependency problem.
I've preserved SSL_get_servername's behavior where it's simultaneously a
lookup of handshake state and local configuration. I've removed it from
SSL_get_servername_type. It got the logic wrong anyway with the order of
the s->session check.
(Searching through code, neither is used on the client, but the
SSL_get_servername one is easy.)
Change-Id: I61bb8fb0858b07d76a7835bffa6dc793812fb027
Reviewed-on: https://boringssl-review.googlesource.com/6298
Reviewed-by: Adam Langley <alangley@gmail.com>
The only reason you'd want it is to tls_unique, and we have a better API
for that. (It has one caller and that is indeed what that caller uses it
for.)
Change-Id: I39f8e353f56f18becb63dd6f7205ad31f4192bfd
Reviewed-on: https://boringssl-review.googlesource.com/6295
Reviewed-by: Adam Langley <alangley@gmail.com>
This is redundant with SSL_get_error. Neither is very good API, but
SSL_get_error is more common. SSL_get_error also takes a return code
which makes it harder to accidentally call it at some a point other than
immediately after an operation. (Any other point is confusing since you
can have SSL_read and SSL_write operations going on in parallel and
they'll get mixed up.)
Change-Id: I5818527c30daac28edb552c6c550c05c8580292d
Reviewed-on: https://boringssl-review.googlesource.com/6294
Reviewed-by: Adam Langley <alangley@gmail.com>
Also added a SSL_CTX_set_select_certificate_cb setter for
select_certificate_cb so code needn't access SSL_CTX directly. Plus it
serves as a convenient anchor for the documentation.
Change-Id: I23755b910e1d77d4bea7bb9103961181dd3c5efe
Reviewed-on: https://boringssl-review.googlesource.com/6291
Reviewed-by: Adam Langley <alangley@gmail.com>
Start converting the ones we can right now. Some of the messier ones
resize init_buf rather than assume the initial size is sufficient, so
those will probably wait until init_buf is gone and the handshake's
undergone some more invasive surgery. The async ones will also require
some thought. But some can be incrementally converted now.
BUG=468889
Change-Id: I0bc22e4dca37d9d671a488c42eba864c51933638
Reviewed-on: https://boringssl-review.googlesource.com/6190
Reviewed-by: Adam Langley <alangley@gmail.com>
Add a slightly richer API. Notably, one can configure ssl_renegotiate_once to
only accept the first renego.
Also, this API doesn't repeat the mistake I made with
SSL_set_reject_peer_renegotiations which is super-confusing with the negation.
Change-Id: I7eb5d534e3e6c553b641793f4677fe5a56451c71
Reviewed-on: https://boringssl-review.googlesource.com/6221
Reviewed-by: Adam Langley <agl@google.com>
OpenSSL's BIO_get_fd returns the fd or -1, not a boolean.
Change-Id: I12a3429c71bb9c9064f9f91329a88923025f1fb5
Reviewed-on: https://boringssl-review.googlesource.com/6080
Reviewed-by: Adam Langley <agl@google.com>
This didn't actually break anything, but it does make session lookup
quite slow.
Change-Id: I13615e8ccf6a46683a21774eb7c073318ae8c28c
Reviewed-on: https://boringssl-review.googlesource.com/6054
Reviewed-by: Matt Braithwaite <mab@google.com>
Reviewed-by: Adam Langley <agl@google.com>
The cipher suite rules could also be anchored on SSL_TXT_* if desired. I
currently documented them in prose largely because SSL_TXT_* also
defines protocol version strings and those are weird; SSL_TXT_TLSV1_1
isn't even a cipher rule. (And, in fact, those are the only SSL_TXT_*
macros that we can't blindly remove. I found some code that #ifdef's the
version SSL_TXT_* macros to decide if version-locked SSL_METHODs are
available.)
Also they clutter the header. I was thinking maybe we should dump a lot
of the random constants into a separate undocumented header or perhaps
just unexport them.
I'm slightly torn on this though and could easily be convinced in the
other direction. (Playing devil's advocate, anchoring on SSL_TXT_* means
we're less likely to forget to document one so long as adding a
SSL_TXT_* macro is the convention.)
Change-Id: Ide2ae44db9d6d8f29c24943090c210da0108dc37
Reviewed-on: https://boringssl-review.googlesource.com/5962
Reviewed-by: Adam Langley <agl@google.com>
Or at least group them together and make a passing attempt to document
them. The legacy X.509 stack itself remains largely untouched and most
of the parameters have to do with it.
Change-Id: I9e11e2ad1bbeef53478c787344398c0d8d1b3876
Reviewed-on: https://boringssl-review.googlesource.com/5942
Reviewed-by: Adam Langley <agl@google.com>
Existing documentation was moved to the header, very slightly tweaked.
Change-Id: Ife3c2351e2d7e6a335854284f996918039414446
Reviewed-on: https://boringssl-review.googlesource.com/5897
Reviewed-by: Adam Langley <agl@google.com>
These were already documented, though some of the documentation was
expanded on slightly.
Change-Id: I04c6276a83a64a03ab9cce9b9c94d4dea9ddf638
Reviewed-on: https://boringssl-review.googlesource.com/5896
Reviewed-by: Adam Langley <agl@google.com>
ssl.h should be first. Also two lines after includes and the rest of the
file.
Change-Id: Icb7586e00a3e64170082c96cf3f8bfbb2b7e1611
Reviewed-on: https://boringssl-review.googlesource.com/5892
Reviewed-by: Adam Langley <agl@google.com>
Forgot to fix these when I fixed the headers.
Change-Id: Ie45e624abc993e16e2d5a872ef00dba9029a38df
Reviewed-on: https://boringssl-review.googlesource.com/5891
Reviewed-by: Adam Langley <agl@google.com>
Also switch to the new variable names (SSL_CTX *ctx, SSL *ssl,
SSL_SESSION *session) for all documented functions.
Change-Id: I15e15a703b96af1727601108223c7ce3b0691f1d
Reviewed-on: https://boringssl-review.googlesource.com/5882
Reviewed-by: Adam Langley <agl@google.com>
This is arguably more commonly queried connection information than the
tls-unique.
Change-Id: I1f080536153ba9f178af8e92cb43b03df37110b5
Reviewed-on: https://boringssl-review.googlesource.com/5874
Reviewed-by: Adam Langley <agl@google.com>
Just the stuff that has been pulled out into sections already.
Change-Id: I3da6bc61d79ccfe2b18d888075dc32026a656464
Reviewed-on: https://boringssl-review.googlesource.com/5873
Reviewed-by: Adam Langley <agl@google.com>
Unfortunately, these are also some of the worst APIs in the SSL stack.
I've tried to capture all the things they expose to the caller. 0 vs -1
is intentionally left unexpanded on for now. Upstream's documentation
says 0 means transport EOF, which is a nice idea but isn't true. (A lot
of random functions return 0 on error and pass it up to the caller.)
https://crbug.com/466303 tracks fixing that.
SSL_set_bio is intentionally documented to NOT be usable when they're
already configured. The function tries to behave in this case and even
with additional cases when |rbio| and/or |wbio| are unchanged, but this
is buggy. For instance, this will explode:
SSL_set_bio(ssl, bio1, bio1);
SSL_set_bio(ssl, bio2, SSL_get_wbio(ssl));
As will this, though it's less clear this is part of the API contract
due to SSL taking ownership.
SSL_set_bio(ssl, bio1, bio2);
SSL_set_bio(ssl, bio2, bio1);
It also tries to handle ssl->bbio already existing, but I doubt it quite
works. Hopefully we can drop ssl->bbio eventually. (Why is this so
complicated...)
Change-Id: I5f9f3043915bffc67e2ebd282813e04afbe076e6
Reviewed-on: https://boringssl-review.googlesource.com/5872
Reviewed-by: Adam Langley <agl@google.com>
Change-Id: Ifa44fef160fc9d67771eed165f8fc277f28a0222
Reviewed-on: https://boringssl-review.googlesource.com/5840
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
There's not enough in that file to really justify its own file now.
Change-Id: I6130cfce6c40fe9d46aa83dd83e6f38d87fdcf64
Reviewed-on: https://boringssl-review.googlesource.com/5823
Reviewed-by: Adam Langley <agl@google.com>
This change adds the ability to configure ciphers specifically for
TLS ≥ 1.0. This compliments the existing ability to specify ciphers
for TLS ≥ 1.1.
This is useful because TLS 1.0 is the first version not to suffer from
POODLE. (Assuming that it's implemented correctly[1].) Thus one might
wish to reserve RC4 solely for SSLv3.
[1] https://www.imperialviolet.org/2014/12/08/poodleagain.html
Change-Id: I774d5336fead48f03d8a0a3cf80c369692ee60df
Reviewed-on: https://boringssl-review.googlesource.com/5793
Reviewed-by: Adam Langley <agl@google.com>
SSL_CTX gets memset to zero, so many of the values needn't be explicitly
initialized.
Change-Id: I0e707a0dcc052cd6f0a5dc8d037400170bd75594
Reviewed-on: https://boringssl-review.googlesource.com/5812
Reviewed-by: Adam Langley <agl@google.com>
If the two extensions select different next protocols (quite possible since one
is server-selected and the other is client-selected), things will break. This
matches the behavior of NSS (Firefox) and Go.
Change-Id: Ie1da97bf062b91a370c85c12bc61423220a22f36
Reviewed-on: https://boringssl-review.googlesource.com/5780
Reviewed-by: Adam Langley <agl@google.com>
Move cert_chain to the SSL_SESSION. Now everything on an SSL_SESSION is
properly serialized. The cert_chain field is, unfortunately, messed up
since it means different things between client and server.
There exists code which calls SSL_get_peer_cert_chain as both client and
server and assumes the existing semantics for each. Since that function
doesn't return a newly-allocated STACK_OF(X509), normalizing between the
two formats is a nuisance (we'd either need to store both cert_chain and
cert_chain_full on the SSL_SESSION or create one of the two variants
on-demand and stash it into the SSL).
This CL does not resolve this and retains the client/server difference
in SSL_SESSION. The SSL_SESSION serialization is a little inefficient
(two copies of the leaf certificate) for a client, but clients don't
typically serialize sessions. Should we wish to resolve it in the
future, we can use a different tag number. Because this was historically
unserialized, existing code must already allow for cert_chain not being
preserved across i2d/d2i.
In keeping with the semantics of retain_only_sha256_of_client_certs,
cert_chain is not retained when that flag is set.
Change-Id: Ieb72fc62c3076dd59750219e550902f1ad039651
Reviewed-on: https://boringssl-review.googlesource.com/5759
Reviewed-by: Adam Langley <agl@google.com>
This begins decoupling the transport from the SSL state machine. The buffering
logic is hidden behind an opaque API. Fields like ssl->packet and
ssl->packet_length are gone.
ssl3_get_record and dtls1_get_record now call low-level tls_open_record and
dtls_open_record functions that unpack a single record independent of who owns
the buffer. Both may be called in-place. This removes ssl->rstate which was
redundant with the buffer length.
Future work will push the buffer up the stack until it is above the handshake.
Then we can expose SSL_open and SSL_seal APIs which act like *_open_record but
return a slightly larger enum due to other events being possible. Likewise the
handshake state machine will be detached from its buffer. The existing
SSL_read, SSL_write, etc., APIs will be implemented on top of SSL_open, etc.,
combined with ssl_read_buffer_* and ssl_write_buffer_*. (Which is why
ssl_read_buffer_extend still tries to abstract between TLS's and DTLS's fairly
different needs.)
The new buffering logic does not support read-ahead (removed previously) since
it lacks a memmove on ssl_read_buffer_discard for TLS, but this could be added
if desired. The old buffering logic wasn't quite right anyway; it tried to
avoid the memmove in some cases and could get stuck too far into the buffer and
not accept records. (The only time the memmove is optional is in DTLS or if
enough of the record header is available to know that the entire next record
would fit in the buffer.)
The new logic also now actually decrypts the ciphertext in-place again, rather
than almost in-place when there's an explicit nonce/IV. (That accidentally
switched in https://boringssl-review.googlesource.com/#/c/4792/; see
3d59e04bce96474099ba76786a2337e99ae14505.)
BUG=468889
Change-Id: I403c1626253c46897f47c7ae93aeab1064b767b2
Reviewed-on: https://boringssl-review.googlesource.com/5715
Reviewed-by: Adam Langley <agl@google.com>
This is a simpler implementation than OpenSSL's, lacking responder IDs
and request extensions support. This mirrors the client implementation
already present.
Change-Id: I54592b60e0a708bfb003d491c9250401403c9e69
Reviewed-on: https://boringssl-review.googlesource.com/5700
Reviewed-by: Adam Langley <agl@google.com>
They get initialized in SSL_new and SSL_CTX_new, respectively.
Change-Id: Ib484108987a99f654d1a77fc473103f5cb393bd7
Reviewed-on: https://boringssl-review.googlesource.com/5676
Reviewed-by: Adam Langley <agl@google.com>
They're not called (new in 1.0.2). We actually may well need to
configure these later to strike ECDSA from the list on Chrome/XP
depending on what TLS 1.3 does, but for now striking it from the cipher
suite list is both necessary and sufficient. I think we're better off
removing these for now and adding new APIs later if we need them.
(This API is weird. You pass in an array of NIDs that must be even
length and alternating between hash and signature NID. We'd also need a
way to query the configured set of sigalgs to filter away. Those used to
exist but were removed in
https://boringssl-review.googlesource.com/#/c/5347/. SSL_get_sigalgs is
an even uglier API and doesn't act on the SSL_CTX.)
And with that, SSL_ctrl and SSL_CTX_ctrl can *finally* be dropped. Don't
leave no-op wrappers; anything calling SSL_ctrl and SSL_CTX_ctrl should
instead switch to the wrapper macros.
BUG=404754
Change-Id: I5d465cd27eef30d108eeb6de075330c9ef5c05e8
Reviewed-on: https://boringssl-review.googlesource.com/5675
Reviewed-by: Adam Langley <agl@google.com>
This change stores the size of the group/modulus (for RSA/DHE) or curve
ID (for ECDHE) in the |SSL_SESSION|. This makes it available for UIs
where desired.
Change-Id: I354141da432a08f71704c9683f298b361362483d
Reviewed-on: https://boringssl-review.googlesource.com/5280
Reviewed-by: Adam Langley <agl@google.com>
Rather than sniff for ClientHello, just fall through to standard logic
once weird cases are resolved.
This means that garbage will now read as WRONG_VERSION rather than
UNKNOWN_PROTOCOL, but the rules here were slightly odd anyway. This also
means we'll now accept empty records before the ClientHello (up to the
empty record limit), and process records of the wrong type with the
usual codepath during the handshake.
This shouldn't be any more risk as it just makes the ClientHello more
consistent with the rest of the protocol. A TLS implementation that
doesn't parse V2ClientHello would do the same unless it still
special-cased the first record. All newly-exposed states are reachable
by fragmenting ClientHello by one byte and then sending the record in
question.
BUG=468889
Change-Id: Ib701ae5d8adb663e158c391639b232a9d9cd1c6e
Reviewed-on: https://boringssl-review.googlesource.com/5712
Reviewed-by: Adam Langley <agl@google.com>
The only point format that we ever support is uncompressed, which the
RFC says implementations MUST support. The TLS 1.3 and Curve25519
forecast is that point format negotiation is gone. Each curve has just
one point format and it's labeled, for historial reasons, as
"uncompressed".
Change-Id: I8ffc8556bed1127cf288d2a29671abe3c9b3c585
Reviewed-on: https://boringssl-review.googlesource.com/5542
Reviewed-by: Adam Langley <agl@google.com>
The RSA key exchange needs decryption and is still unsupported.
Change-Id: I8c13b74e25a5424356afbe6e97b5f700a56de41f
Reviewed-on: https://boringssl-review.googlesource.com/5467
Reviewed-by: Adam Langley <agl@google.com>
This change mirrors upstream's custom extension API because we have some
internal users that depend on it.
Change-Id: I408e442de0a55df7b05c872c953ff048cd406513
Reviewed-on: https://boringssl-review.googlesource.com/5471
Reviewed-by: Adam Langley <agl@google.com>
Fastradio was a trick where the ClientHello was padding to at least 1024
bytes in order to trick some mobile radios into entering high-power mode
immediately. After experimentation, the feature is being dropped.
This change also tidies up a bit of the extensions code now that
everything is using the new system.
Change-Id: Icf7892e0ac1fbe5d66a5d7b405ec455c6850a41c
Reviewed-on: https://boringssl-review.googlesource.com/5466
Reviewed-by: Adam Langley <agl@google.com>
In the ancient times, before ex_data and OpenSSL, SSLeay supported a
single app_data slot in various types. Later app_data begat ex_data, and
app_data was replaced by compatibility macros to ex_data index zero.
Today, app_data is still in use, but ex_data never reserved index zero
for app_data. This causes some danger where, if the first ex_data
registration did not use NULL callbacks, the registration's callbacks
would collide with app_data.
Instead, add an option to the types with app_data to reserve index zero.
Also switch SSL_get_ex_data_X509_STORE_CTX_idx to always return zero
rather than allocate a new one. It used to be that you used
X509_STORE_CTX_get_app_data. I only found one consumer that we probably
don't care about, but, to be safe and since it's easy, go with the
conservative option. (Although SSL_get_ex_data_X509_STORE_CTX_idx wasn't
guaranteed to alias app_data, in practice it always did. No consumer
ever calls X509_STORE_CTX_get_ex_new_index.)
Change-Id: Ie75b279d60aefd003ffef103f99021c5d696a5e9
Reviewed-on: https://boringssl-review.googlesource.com/5313
Reviewed-by: Adam Langley <agl@google.com>
The APIs that are CTRL macros will be documented (and converted to
functions) in a follow-up.
Change-Id: I7d086db1768aa3c16e8d7775b0c818b72918f4c2
Reviewed-on: https://boringssl-review.googlesource.com/5354
Reviewed-by: Adam Langley <agl@google.com>
This allows us to remove the confusing EVP_PKEY argument to the
SSL_PRIVATE_KEY_METHOD wrapper functions. It also simplifies some of the
book-keeping around the CERT structure, as well as the API for
configuring certificates themselves. The current one is a little odd as
some functions automatically route to the slot while others affect the
most recently touched slot. Others still (extra_certs) apply to all
slots, making them not terribly useful.
Consumers with complex needs should use cert_cb or the early callback
(select_certificate_cb) to configure whatever they like based on the
ClientHello.
BUG=486295
Change-Id: Ice29ffeb867fa4959898b70dfc50fc00137f01f3
Reviewed-on: https://boringssl-review.googlesource.com/5351
Reviewed-by: Adam Langley <agl@google.com>
The distinction was not well-enforced in the code. In fact, it wasn't
even possible to use the RSA_SIGN slot because ssl_set_pkey and
ssl_set_cert would always use the RSA_ENC slot.
A follow-up will fold away the mechanism altogether, but this is an easy
initial simplfication.
BUG=486295
Change-Id: I66b5bf3e6dc243dac7c75924c1c1983538e49060
Reviewed-on: https://boringssl-review.googlesource.com/5349
Reviewed-by: Adam Langley <agl@google.com>
One tedious thing about using CBB is that you can't safely CBB_cleanup
until CBB_init is successful, which breaks the general 'goto err' style
of cleanup. This makes it possible:
CBB_zero ~ EVP_MD_CTX_init
CBB_init ~ EVP_DigestInit
CBB_cleanup ~ EVP_MD_CTX_cleanup
Change-Id: I085ecc4405715368886dc4de02285a47e7fc4c52
Reviewed-on: https://boringssl-review.googlesource.com/5267
Reviewed-by: Adam Langley <agl@google.com>
This change also switches the behaviour of the client. Previously the
client would send the SCSV rather than the extension, but now it'll only
do that for SSLv3 connections.
Change-Id: I67a04b8abbef2234747c0dac450458deb6b0cd0a
Reviewed-on: https://boringssl-review.googlesource.com/5143
Reviewed-by: Adam Langley <agl@google.com>
Rather than rely on Chromium to query SSL_initial_handshake_complete in the
callback (which didn't work anyway because the callback is called afterwards),
move the logic into BoringSSL. BoringSSL already enforces that clients never
offer resumptions on renegotiation (it wouldn't work well anyway as client
session cache lookup is external), so it's reasonable to also implement
in-library that sessions established on a renegotiation are not cached.
Add a bunch of tests that new_session_cb is called when expected.
BUG=501418
Change-Id: I42d44c82b043af72b60a0f8fdb57799e20f13ed5
Reviewed-on: https://boringssl-review.googlesource.com/5171
Reviewed-by: Adam Langley <agl@google.com>
This adds a new API, SSL_set_private_key_method, which allows the consumer to
customize private key operations. For simplicity, it is incompatible with the
multiple slots feature (which will hopefully go away) but does not, for now,
break it.
The new method is only routed up for the client for now. The server will
require a decrypt hook as well for the plain RSA key exchange.
BUG=347404
Change-Id: I35d69095c29134c34c2af88c613ad557d6957614
Reviewed-on: https://boringssl-review.googlesource.com/5049
Reviewed-by: Adam Langley <agl@google.com>
To account for the changes in ticket renewal, Chromium will need to listen for
new_session_cb to determine whether the handshake produced a new session.
Chromium currently never caches sessions produced on a renegotiation. To retain
that behavior, it'll need to know whether new_session_cb is initial or not.
Rather than maintain duplicate state and listen for SSL_HANDSHAKE_DONE, it's
simpler to just let it query ssl->s3->initial_handshake_complete.
BUG=501418
Change-Id: Ib2f2541460bd09cf16106388e9cfdf3662e02681
Reviewed-on: https://boringssl-review.googlesource.com/5126
Reviewed-by: Adam Langley <agl@google.com>
See also upstream's 27c76b9b8010b536687318739c6f631ce4194688, CVE-2015-1791.
Rather than write a dup function, serializing and deserializing the object is
simpler. It also fixes a bug in the original fix where it never calls
new_session_cb to store the new session (for clients which use that callback;
how clients should handle the session cache is much less clear).
The old session isn't pruned as we haven't processed the Finished message yet.
RFC 5077 says:
The server MUST NOT assume that the client actually received the updated
ticket until it successfully verifies the client's Finished message.
Moreover, because network messages are asynchronous, a new SSL connection may
have began just before the client received the new ticket, so any such servers
are broken regardless.
Change-Id: I13b3dc986dc58ea2ce66659dbb29e14cd02a641b
Reviewed-on: https://boringssl-review.googlesource.com/5122
Reviewed-by: Adam Langley <agl@google.com>
Most of the logic was redundant with checks already made in
ssl3_get_server_certificate. The DHE check was missing an ECDHE half
(and was impossible). The ECDSA check allowed an ECDSA certificate for
RSA. The only non-redundant check was a key usage check which,
strangely, is only done for ECDSA ciphers.
(Although this function called X509_certificate_type and checked sign
bits, those bits in X509_certificate_type are purely a function of the
key type and don't do anything.)
Change-Id: I8df7eccc0ffff49e4cfd778bd91058eb253b13cb
Reviewed-on: https://boringssl-review.googlesource.com/5047
Reviewed-by: Adam Langley <agl@google.com>
With SSL2 gone, there's no need for this split between the abstract
cipher framework and ciphers. Put the cipher suite table in ssl_cipher.c
and move other SSL_CIPHER logic there. With that gone, prune the
cipher-related hooks in SSL_PROTOCOL_METHOD.
BUG=468889
Change-Id: I48579de8bc4c0ea52781ba1b7b57bc5b4919d21c
Reviewed-on: https://boringssl-review.googlesource.com/4961
Reviewed-by: Adam Langley <agl@google.com>
The ctrl hooks are left alone since they should just go away.
Simplifying the cipher story will happen in the next CL.
BUG=468889
Change-Id: I979971c90f59c55cd5d17554f1253158b114f18b
Reviewed-on: https://boringssl-review.googlesource.com/4957
Reviewed-by: Adam Langley <agl@google.com>
Yes, OpenSSL lets you randomly change its internal state. This is used
as part of server-side renegotiation. Server-side renegotiation is gone.
BUG=429450
Change-Id: Ic1b013705734357acf64e8bf89a051b2b7521c64
Reviewed-on: https://boringssl-review.googlesource.com/4828
Reviewed-by: Adam Langley <agl@google.com>
It's never called and the state is meaningless now.
Change-Id: I5429ec3eb7dc2b789c0584ea88323f0ff18920ae
Reviewed-on: https://boringssl-review.googlesource.com/4826
Reviewed-by: Adam Langley <agl@google.com>
The only case where renego is supported is if we are a client and the
server sends a HelloRequest. That is still needed to support the renego
+ client auth hack in Chrome. Beyond that, no other forms of renego will
work.
The messy logic where the handshake loop is repurposed to send
HelloRequest and the extremely confusing tri-state s->renegotiate (which
makes SSL_renegotiate_pending a lie during the initial handshake as a
server) are now gone. The next change will further simplify things by
removing ssl->s3->renegotiate and the renego deferral logic. There's
also some server-only renegotiation checks that can go now.
Also clean up ssl3_read_bytes' HelloRequest handling. The old logic relied on
the handshake state machine to reject bad HelloRequests which... actually that
code probably lets you initiate renego by sending the first four bytes of a
ServerHello and expecting the peer to read it later.
BUG=429450
Change-Id: Ie0f87d0c2b94e13811fe8e22e810ab2ffc8efa6c
Reviewed-on: https://boringssl-review.googlesource.com/4824
Reviewed-by: Adam Langley <agl@google.com>
This dates back to upstream's a2a0158959e597188c10fbfeaf61888b2df2e587.
It seems to be a remnant of those SSL_clear calls in the handshake state
machine which... were also bizarre and since gone.
Since SSL_clear is to drop the current connection but retain the
configuration, it doesn't really make sense to forbid it while you're
mid-handshake.
This removes another consumer of s->renegotiate.
BUG=429450
Change-Id: Ifac6bf11644447fd5571262bed7421684739bc39
Reviewed-on: https://boringssl-review.googlesource.com/4823
Reviewed-by: Adam Langley <agl@google.com>
ssl_cipher_list_to_bytes is client-only, so s->renegotiate worked, but
the only reason the other two worked is because s->renegotiate isn't a
lie on the server before ServerHello.
BUG=429450
Change-Id: If68a986c6ec4a0f16e57a6187238e05b50ecedfc
Reviewed-on: https://boringssl-review.googlesource.com/4822
Reviewed-by: Adam Langley <agl@google.com>
Now that WebRTC honors packet boundaries (https://crbug.com/447431), we
can start enforcing them correctly. Configuring read-ahead now does
nothing. Instead DTLS will always set "read-ahead" and also correctly
enforce packet boundaries when reading records. Add tests to ensure that
badly fragmented packets are ignored. Because such packets don't fail
the handshake, the tests work by injecting an alert in the front of the
handshake stream and ensuring the DTLS implementation ignores them.
ssl3_read_n can be be considerably unraveled now, but leave that for
future cleanup. For now, make it correct.
BUG=468889
Change-Id: I800cfabe06615af31c2ccece436ca52aed9fe899
Reviewed-on: https://boringssl-review.googlesource.com/4820
Reviewed-by: Adam Langley <agl@google.com>
tls1_enc is now SSL_AEAD_CTX_{open,seal}. This starts tidying up a bit
of the record-layer logic. This removes rr->input, as encrypting and
decrypting records no longer refers to various globals. It also removes
wrec altogether. SSL3_RECORD is now only used to maintain state about
the current incoming record. Outgoing records go straight to the write
buffer.
This also removes the outgoing alignment memcpy and simply calls
SSL_AEAD_CTX_seal with the parameters as appropriate. From bssl speed
tests, this seems to be faster on non-ARM and a bit of a wash on ARM.
Later it may be worth recasting these open/seal functions to write into
a CBB (tweaked so it can be malloc-averse), but for now they take an
out/out_len/max_out trio like their EVP_AEAD counterparts.
BUG=468889
Change-Id: Ie9266a818cc053f695d35ef611fd74c5d4def6c3
Reviewed-on: https://boringssl-review.googlesource.com/4792
Reviewed-by: Adam Langley <agl@google.com>
Current thought is to organize this by:
- Core SSL_CTX APIs (creating, destroying)
- Core SSL APIs (creating destroying, maybe handshake, read, write as
well)
- APIs to configure SSL_CTX/SSL, roughly grouped by feature. Probably
options and modes are the first two sections. SSL_TXT_* constants can
be part of documenting cipher suite configuration.
- APIs to query state from SSL_CTX/SSL, roughly grouped by feature. (Or
perhaps these should be folded into the configuration sections?)
The functions themselves aren't reordered or reorganized to match the
eventual header order yet. Though I did do the s -> ssl rename on the
ones I've touched.
Also formally deprecate SSL_clear. It would be a core SSL API
except it's horrible.
Change-Id: Ia7e4fdcb7bad4e9ccdee8cf8c3136dc63aaaa772
Reviewed-on: https://boringssl-review.googlesource.com/4784
Reviewed-by: Adam Langley <agl@google.com>
|SSL_CTX| and |X509_STORE| have grown their own locks. Several static
locks have been added to hack around not being able to use a
|CRYPTO_once_t| in public headers. Lastly, support for calling
|SSL_CTX_set_generate_session_id| concurrently with active connections
has been removed. No other property of an |SSL_CTX| works like that.
Change-Id: Iff5fe3ee3fdd6ea9c9daee96f850b107ad8a6bca
Reviewed-on: https://boringssl-review.googlesource.com/4775
Reviewed-by: Adam Langley <agl@google.com>
Convert reference counts in ssl/ to use |CRYPTO_refcount_t|.
Change-Id: I5d60f641b0c89b1ddfe38bfbd9d7285c60377f4c
Reviewed-on: https://boringssl-review.googlesource.com/4773
Reviewed-by: Adam Langley <agl@google.com>
SSL_get_current_cipher is documented by upstream to return the cipher actually
being used. However, because it reads s->session, it returns information
pertaining to the session to be offered if queried before ServerHello or early
in an abbreviated handshake.
Logic around s->session needs more comprehensive cleanup but for just this
function, defining it to be the current outgoing cipher is close to the current
semantics but for fixing the initial state (s->session->cipher is populated
when sending CCS). Store it in the SSL_AEAD_CTX which seems a natural place to
associate state pertaining to a connection half.
BUG=484744
Change-Id: Ife8db27a16615d0dbb2aec65359537243e08af7c
Reviewed-on: https://boringssl-review.googlesource.com/4733
Reviewed-by: Adam Langley <agl@google.com>
This cuts down on one config knob as well as one case in the renego
combinatorial explosion. Since the only case we care about with renego
is the client auth hack, there's no reason to ever do resumption.
Especially since, no matter what's in the session cache:
- OpenSSL will only ever offer the session it just established,
whether or not a newer one with client auth was since established.
- Chrome will never cache sessions created on a renegotiation, so
such a session would never make it to the session cache.
- The new_session + SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION
logic had a bug where it would unconditionally never offer tickets
(but would advertise support) on renego, so any server doing renego
resumption against an OpenSSL-derived client must not support
session tickets.
This also gets rid of s->new_session which is now pointless.
BUG=429450
Change-Id: I884bdcdc80bff45935b2c429b4bbc9c16b2288f8
Reviewed-on: https://boringssl-review.googlesource.com/4732
Reviewed-by: Adam Langley <agl@google.com>
As of crbug.com/484543, Chromium's SSLClientSocket is not sensitive to whether
renegotiation is enabled or not. Disable it by default and require consumers to
opt into enabling this protocol mistake.
BUG=429450
Change-Id: I2329068284dbb851da010ff1fd398df3d663bcc3
Reviewed-on: https://boringssl-review.googlesource.com/4723
Reviewed-by: Adam Langley <agl@google.com>
With SSL_get0_raw_cipherlist gone, there's no need to hold onto it.
Change-Id: I258f8bfe21cc354211a777660df680df6c49df2a
Reviewed-on: https://boringssl-review.googlesource.com/4616
Reviewed-by: Adam Langley <agl@google.com>
The only place using it is export keying material which can do the
version check inline.
Change-Id: I1893966c130aa43fa97a6116d91bb8b04f80c6fb
Reviewed-on: https://boringssl-review.googlesource.com/4615
Reviewed-by: Adam Langley <agl@google.com>
clang-format got a little confused there.
Change-Id: I46df523e8a7813a2b4e243da3df22851b3393873
Reviewed-on: https://boringssl-review.googlesource.com/4614
Reviewed-by: Adam Langley <agl@google.com>
The API is unused and rather awkward (mixes output parameters with
return values, special-case for NULL).
Change-Id: I4396f98534bf1271e53642f255e235cf82c7615a
Reviewed-on: https://boringssl-review.googlesource.com/4560
Reviewed-by: Adam Langley <agl@google.com>
Also size them based on the limits in the quantities they control (after
checking bounds at the API boundary).
BUG=404754
Change-Id: Id56ba45465a473a1a793244904310ef747f29b63
Reviewed-on: https://boringssl-review.googlesource.com/4559
Reviewed-by: Adam Langley <agl@google.com>
Not going to bother adding the compatibility macros. If they get ifdef'd
out, all the better.
BUG=404754
Change-Id: I26414d2fb84ee1f0b15a3b96c871949fe2bb7fb1
Reviewed-on: https://boringssl-review.googlesource.com/4558
Reviewed-by: Adam Langley <agl@google.com>
This is a bitmask, so the number of bits available should be the same
across all platforms.
Change-Id: I98e8d375fc7d042aeae1270174bc8fc63fba5dfc
Reviewed-on: https://boringssl-review.googlesource.com/4556
Reviewed-by: Adam Langley <agl@google.com>
Document them while I'm here. This adds a new 'preprocessor
compatibility section' to avoid breaking #ifdefs. The CTRL values
themselves are defined to 'doesnt_exist' to catch anything calling
SSL_ctrl directly until that function can be unexported completely.
BUG=404754
Change-Id: Ia157490ea8efe0215d4079556a0c7643273e7601
Reviewed-on: https://boringssl-review.googlesource.com/4553
Reviewed-by: Adam Langley <agl@google.com>
Probably we'll want some simpler server-side API later. But, as things
stand, all consumers of these functions are #ifdef'd out and have to be
because the requisite OCSP_RESPONSE types are gone.
Change-Id: Ic82b2ab3feca14c56656da3ceb3651819e3eb377
Reviewed-on: https://boringssl-review.googlesource.com/4551
Reviewed-by: Adam Langley <agl@google.com>
It's unused, but for some old #ifdef branch in wpa_supplicant's EAP-FAST
hack, before SSL_set_session_ticket_ext_cb existed.
Change-Id: Ifc11fea2f6434354f756e04e5fc3ed5f1692025e
Reviewed-on: https://boringssl-review.googlesource.com/4550
Reviewed-by: Adam Langley <agl@google.com>
This is consistent with C's free function and upstream's convention.
Change-Id: I83f6e2f5824e28f69a9916e580dc2d8cb3b94234
Reviewed-on: https://boringssl-review.googlesource.com/4512
Reviewed-by: Adam Langley <agl@google.com>
These are never used and no flags are defined anyway.
Change-Id: I206dc2838c5f68d87559a702dcb299b208cc7e1e
Reviewed-on: https://boringssl-review.googlesource.com/4493
Reviewed-by: Adam Langley <agl@google.com>
This is a really dumb API wart. Now that we have a limited set of curves that
are all reasonable, the automatic logic should just always kick in. This makes
set_ecdh_auto a no-op and, instead of making it the first choice, uses it as
the fallback behavior should none of the older curve selection APIs be used.
Currently, by default, server sockets can only use the plain RSA key exchange.
BUG=481139
Change-Id: Iaabc82de766cd00968844a71aaac29bd59841cd4
Reviewed-on: https://boringssl-review.googlesource.com/4531
Reviewed-by: Adam Langley <agl@google.com>
Instead, each module defines a static CRYPTO_EX_DATA_CLASS to hold the values.
This makes CRYPTO_cleanup_all_ex_data a no-op as spreading the
CRYPTO_EX_DATA_CLASSes across modules (and across crypto and ssl) makes cleanup
slightly trickier. We can make it do something if needbe, but it's probably not
worth the trouble.
Change-Id: Ib6f6fd39a51d8ba88649f0fa29c66db540610c76
Reviewed-on: https://boringssl-review.googlesource.com/4375
Reviewed-by: Adam Langley <agl@google.com>
Callers are required to use the wrappers now. They still need OPENSSL_EXPORT
since crypto and ssl get built separately in the standalone shared library
build.
Change-Id: I61186964e6099b9b589c4cd45b8314dcb2210c89
Reviewed-on: https://boringssl-review.googlesource.com/4372
Reviewed-by: Adam Langley <agl@google.com>
This causes any unexpected handshake records to be met with a fatal
no_renegotiation alert.
In addition, restore the redundant version sanity-checks in the handshake state
machines. Some code would zero the version field as a hacky way to break the
handshake on renego. Those will be removed when switching to this API.
The spec allows for a non-fatal no_renegotiation alert, but ssl3_read_bytes
makes it difficult to find the end of a ClientHello and skip it entirely. Given
that OpenSSL goes out of its way to map non-fatal no_renegotiation alerts to
fatal ones, this seems probably fine. This avoids needing to account for
another source of the library consuming an unbounded number of bytes without
returning data up.
Change-Id: Ie5050d9c9350c29cfe32d03a3c991bdc1da9e0e4
Reviewed-on: https://boringssl-review.googlesource.com/4300
Reviewed-by: Adam Langley <agl@google.com>
Just about everything depends on SSL_CIPHER. Move it to the top as the first
section in ssl.h. Match the header order and the source file order and document
everything. Also make a couple of minor style guide tweaks.
Change-Id: I6a810dbe79238278ac480e5ced1447055715a79f
Reviewed-on: https://boringssl-review.googlesource.com/4290
Reviewed-by: Adam Langley <agl@google.com>
These are all masks of some sort (except id which is a combined version and
cipher), so they should use fixed-size unsigned integers.
Change-Id: I058dd8ad231ee747df4b4fb17d9c1e2cbee21918
Reviewed-on: https://boringssl-review.googlesource.com/4283
Reviewed-by: Adam Langley <agl@google.com>
The rest of ssl/ still includes things everywhere, but this at least fixes the
includes that were implicit from ssl/internal.h.
Change-Id: I7ed22590aca0fe78af84fd99a3e557f4b05f6782
Reviewed-on: https://boringssl-review.googlesource.com/4281
Reviewed-by: Adam Langley <agl@google.com>
Match the other internal headers.
Change-Id: Iff7e2dd06a1a7bf993053d0464cc15638ace3aaa
Reviewed-on: https://boringssl-review.googlesource.com/4280
Reviewed-by: Adam Langley <agl@google.com>
These are the remaining untested cipher suites. Rather than add support in
runner.go, just remove them altogether. Grepping for this is a little tricky,
but nothing enables aNULL (all occurrences disable it), and all occurrences of
["ALL:] seem to be either unused or explicitly disable anonymous ciphers.
Change-Id: I4fd4b8dc6a273d6c04a26e93839641ddf738343f
Reviewed-on: https://boringssl-review.googlesource.com/4258
Reviewed-by: Adam Langley <agl@google.com>
Fix up the variable names. Also avoid the messy logic of checking whether the
label and context collide with the normal key expansion ones in the face of
adverserial inputs. Make that the caller's responsibility, just as it's already
the caller's responsibility to ensure that different calls don't overlap. (The
label should be a constant string in an IANA registry anyway.)
Change-Id: I062fadb7b6a18fa946b883be660ea9b3f0f6277c
Reviewed-on: https://boringssl-review.googlesource.com/4216
Reviewed-by: Adam Langley <agl@google.com>
There's multiple sets of APIs for selecting the curve. Fold away
SSL_OP_SINGLE_ECDH_USE as failing to set it is either a no-op or a bug. With
that gone, the consumer only needs to control the selection of a curve, with
key generation from then on being uniform. Also clean up the interaction
between the three API modes in s3_srvr.c; they were already mutually exclusive
due to tls1_check_ec_tmp_key.
This also removes all callers of EC_KEY_dup (and thus CRYPTO_dup_ex_data)
within the library.
Change-Id: I477b13bd9e77eb03d944ef631dd521639968dc8c
Reviewed-on: https://boringssl-review.googlesource.com/4200
Reviewed-by: Adam Langley <agl@google.com>
Within the library, only ssl_update_cache read them, so add a dedicated field
to replace that use.
The APIs have a handful of uninteresting callers so I've left them in for now,
but they now always return zero.
Change-Id: Ie4e36fd4ab18f9bff544541d042bf3c098a46933
Reviewed-on: https://boringssl-review.googlesource.com/4101
Reviewed-by: Adam Langley <agl@google.com>
Quite a few functions reported wrong function names when pushing
to the error stack.
Change-Id: I84d89dbefd2ecdc89ffb09799e673bae17be0e0f
Reviewed-on: https://boringssl-review.googlesource.com/4080
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
Align with upstream's renames from a while ago. These names are considerably
more standard. This also aligns with upstream in that both "ECDHE" and "EECDH"
are now accepted in the various cipher string parsing bits.
Change-Id: I84c3daeacf806f79f12bc661c314941828656b04
Reviewed-on: https://boringssl-review.googlesource.com/4053
Reviewed-by: Adam Langley <agl@google.com>
This too isn't version-specific. This removes the final difference between TLS
and DTLS SSL3_ENC_METHODs and we can fold them together. (We should be able to
fold away the version-specific differences too, but all in due time.)
Change-Id: I6652d3942a0970273d46d28d7052629c81f848b5
Reviewed-on: https://boringssl-review.googlesource.com/3771
Reviewed-by: Adam Langley <agl@google.com>
It created the cert structure in SSL_CTX or SSL if it was NULL, but they can
never be NULL as the comments already said.
(Imported from upstream's 2c3823491d8812560922a58677e3ad2db4b2ec8d.)
Change-Id: I97c7bb306d6f3c18597850db9f08023b2ef74839
Reviewed-on: https://boringssl-review.googlesource.com/4042
Reviewed-by: Adam Langley <agl@google.com>
This allows the current RC4 state of an SSL* to be extracted. We have
internal uses for this functionality.
Change-Id: Ic124c4b253c8325751f49e7a4c021768620ea4b7
Reviewed-on: https://boringssl-review.googlesource.com/3722
Reviewed-by: Adam Langley <agl@google.com>
This callback receives information about the ClientHello and can decide
whether or not to allow the handshake to continue.
Change-Id: I21be28335fa74fedb5b73a310ee24310670fc923
Reviewed-on: https://boringssl-review.googlesource.com/3721
Reviewed-by: Adam Langley <agl@google.com>
Fix a few remnants of them being unsigned long. Also rename extremely unhelpful
variable names in SSL_get_error. i is now ret_code to match the header.
Change-Id: Ic31d6626bfe09c9e21c03691dfc716c5573833ea
Reviewed-on: https://boringssl-review.googlesource.com/3881
Reviewed-by: Adam Langley <agl@google.com>
Some things were misindented in the reformatting.
Change-Id: I97642000452ce4d5b4c8a39b794cec13097d8760
Reviewed-on: https://boringssl-review.googlesource.com/3870
Reviewed-by: Adam Langley <agl@google.com>
(Which is just an exported wrapper around ssl3_get_cipher_by_value.)
Change-Id: Ibba166015ce59e337ff50963ba20237ac4949aaf
Reviewed-on: https://boringssl-review.googlesource.com/3543
Reviewed-by: Adam Langley <agl@google.com>
Upstream settled in this API, and it's also the one that we expect
internally and that third_party code will expect.
Change-Id: Id7af68cf0af1f2e4d9defd37bda2218d70e2aa7b
Reviewed-on: https://boringssl-review.googlesource.com/3542
Reviewed-by: Adam Langley <agl@google.com>
Tighten up the requirements for False Start. At this point, neither
AES-CBC or RC4 are something that we want to use unless we're sure that
the server wants to speak them.
Rebase of original CL at: https://boringssl-review.googlesource.com/#/c/1980/
BUG=427721
Change-Id: I9ef7a596edeb8df1ed070aac67c315b94f3cc77f
Reviewed-on: https://boringssl-review.googlesource.com/3501
Reviewed-by: Adam Langley <agl@google.com>
Found while diagnosing some crashes and hangs in the malloc tests. This (and
the follow-up) get us further but does not quite let the malloc tests pass
quietly, even without valgrind. DTLS silently ignores some malloc failures
(confusion with silently dropping bad packets) which then translate to hangs.
Change-Id: Ief06a671e0973d09d2883432b89a86259e346653
Reviewed-on: https://boringssl-review.googlesource.com/3482
Reviewed-by: Adam Langley <agl@google.com>
False Start is the name it's known by now. Deprecate the old API and expose new
ones with the new name.
Change-Id: I32d307027e178fd7d9c0069686cc046f75fdbf6f
Reviewed-on: https://boringssl-review.googlesource.com/3481
Reviewed-by: Adam Langley <agl@google.com>
I found no users of this. We can restore it if needbe, but I don't expect
anyone to find it useful in its current form. The API is suspect for the same
reasons DTLSv1_listen was. An SSL object is stateful and assumes you already
have the endpoint separated out.
If we ever need it, server-side HelloVerifyRequest and DTLSv1_listen should be
implemented by a separate stateless listener that statelessly handles
cookieless ClientHello + HelloVerifyRequest. Once a ClientHello with a valid
cookie comes in, it sets up a stateful SSL object and passes control along to
that.
Change-Id: I86adc1dfb6a81bebe987784c36ad6634a9a1b120
Reviewed-on: https://boringssl-review.googlesource.com/3480
Reviewed-by: Adam Langley <agl@google.com>
Nothing else on SSL* is thread-safe. (Also SSL_set_generate_session_id is never
called.) This removes the last use of CRYPTO_LOCK_SSL.
Change-Id: I4cf8c05d7cef4ea27962ce29902649317c22f74d
Reviewed-on: https://boringssl-review.googlesource.com/3361
Reviewed-by: Adam Langley <agl@google.com>
The fact that an SSL_SESSION is reference-counted is already part of the API.
If an external application (like, say, the test code) wishes to participate, we
should let it.
Change-Id: If04d26a35141da14fd8d917de6cc1c10537ad11a
Reviewed-on: https://boringssl-review.googlesource.com/3344
Reviewed-by: Adam Langley <agl@google.com>
This makes the following changes:
- SSL_cutthrough_complete no longer rederives whether cutthrough happened and
just maintains a handshake bit.
- SSL_in_init no longer returns true if we are False Starting but haven't
completed the handshake. That logic was awkward as it depended on querying
in_read_app_data to force SSL_read to flush the entire handshake. Defaulting
SSL_in_init to continue querying the full handshake and special-casing
SSL_write is better. E.g. the check in bidirectional SSL_shutdown wants to know
if we're in a handshake. No internal consumer of
SSL_MODE_HANDSHAKE_CUTTHROUGH ever queries SSL_in_init directly.
- in_read_app_data is gone now that the final use is dead.
Change-Id: I05211a116d684054dfef53075cd277b1b30623b5
Reviewed-on: https://boringssl-review.googlesource.com/3336
Reviewed-by: Adam Langley <agl@google.com>
We will not support any form of DTLS renego.
Change-Id: I6eab4ed12a131ad27fdb9b5ea7cc1f35d872cd43
Reviewed-on: https://boringssl-review.googlesource.com/3230
Reviewed-by: Adam Langley <agl@google.com>
It has no callers in internal code.
Change-Id: I53cf1769b71be6a0441533b6af7d3f64aab5098a
Reviewed-on: https://boringssl-review.googlesource.com/3219
Reviewed-by: Adam Langley <agl@google.com>
This regressed in fcf25833bc. 0 return code on
unclean shutdown means the underlying BIO returned EOF, didn't push any error
code, but we haven't seen close_notify yet. The intent seems to be that you go
check errno or some BIO-specific equivalent if you care about close_notify.
Make sure test code routes all SSL_read return codes through SSL_get_error
since that's supposed to work in all cases.
(Note that rv == 0 can still give SSL_ERROR_SSL if the error queue is not
empty.)
Change-Id: I45bf9614573f876d93419ce169a4e0d9ceea9052
Reviewed-on: https://boringssl-review.googlesource.com/2981
Reviewed-by: Adam Langley <agl@google.com>
The EVP_CIPHER codepath should no longer be used with TLS. It still exists for
DTLS and SSLv3. The AEAD construction in TLS does not allow for
variable-overhead AEADs, so stateful AEADs do not include the length in the ad
parameter. Rather the AEADs internally append the unpadded length once it is
known. EVP_aead_rc4_md5_tls is modified to account for this.
Tests are added (and RC4-MD5's regenerated) for each of the new AEADs. The
cipher tests are all moved into crypto/cipher/test because there's now a lot of
them and they clutter the directory listing.
In ssl/, the stateful AEAD logic is also modified to account for stateful AEADs
with a fixed IV component, and for AEADs which use a random nonce (for the
explicit-IV CBC mode ciphers).
The new implementation fixes a bug/quirk in stateless CBC mode ciphers where
the fixed IV portion of the keyblock was generated regardless. This is at the
end, so it's only relevant for EAP-TLS which generates a MSK from the end of
the key block.
Change-Id: I2d8b8aa11deb43bde2fd733f4f90b5d5b8cb1334
Reviewed-on: https://boringssl-review.googlesource.com/2692
Reviewed-by: Adam Langley <agl@google.com>
State on s3 gets freed in both ssl3_clear and ssl3_free. Considate to just
ssl3_free. This replaces the (SSL,ssl,ssl3)_clear calls in (SSL,ssl,ssl3)_new
with the state that was initialized. This results in a little code duplication
between SSL_new and SSL_clear because state is on the wrong object. I've just
left TODOs for now; some of it will need disentangling.
We're far from it, but going forward, separate state between s and s->s3 as:
- s contains configuration state, DTLS or TLS. It is initialized from SSL_CTX,
configurable directly afterwards, and preserved across SSL_clear calls.
(Including when it's implicitly set as part of a handshake callback.)
- Connection state hangs off s->s3 (TLS) and s->d1 (DTLS). It is reset across
SSL_clear. This should happen naturally out of a ssl_free/ssl_new pair.
The goal is to avoid needing separate initialize and reset code for anything;
the point any particular state is reset is the point its owning context is
destroyed and recreated.
Change-Id: I5d779010778109f8c339c07433a0777feaf94d1f
Reviewed-on: https://boringssl-review.googlesource.com/2822
Reviewed-by: Adam Langley <agl@google.com>
Configuration data inherited from the ctx happens in SSL_new. (This also gets
in the way of using ssl3_free/ssl3_new to implement SSL_clear.)
Change-Id: I2773af91abf4e1edc0c1a324bc1e94088d7c2274
Reviewed-on: https://boringssl-review.googlesource.com/2821
Reviewed-by: Adam Langley <agl@google.com>
RAND_pseudo_bytes just calls RAND_bytes now and only returns 0 or 1. Switch all
callers within the library call the new one and use the simpler failure check.
This fixes a few error checks that no longer work (< 0) and some missing ones.
Change-Id: Id51c79deec80075949f73fa1fbd7b76aac5570c6
Reviewed-on: https://boringssl-review.googlesource.com/2621
Reviewed-by: Adam Langley <agl@google.com>
This makes SSLv23_method go through DTLS_ANY_VERSION's version negotiation
logic. This allows us to get rid of duplicate ClientHello logic. For
compatibility, SSL_METHOD is now split into SSL_PROTOCOL_METHOD and a version.
The legacy version-locked methods set min_version and max_version based this
version field to emulate the original semantics.
As a bonus, we can now handle fragmented ClientHello versions now.
Because SSLv23_method is a silly name, deprecate that too and introduce
TLS_method.
Change-Id: I8b3df2b427ae34c44ecf972f466ad64dc3dbb171
Amend the version negotiation tests to test this new spelling of max_version.
min_version will be tested in a follow-up.
Change-Id: Ic4bfcd43bc4e5f951140966f64bb5fd3e2472b01
Reviewed-on: https://boringssl-review.googlesource.com/2583
Reviewed-by: Adam Langley <agl@google.com>
SSL3_ENC_METHOD will remain version-specific while SSL_METHOD will become
protocol-specific. This finally removes all the version-specific portions of
SSL_METHOD but the version tag itself.
(SSL3_ENC_METHOD's version-specific bits themselves can probably be handled by
tracking a canonicalized protocol version. It would simplify version
comparisons anyway. The one catch is SSLv3 has a very different table. But
that's a cleanup for future. Then again, perhaps a version-specific method
table swap somewhere will be useful later for TLS 1.3.)
Much of this commit was generated with sed invocation:
s/method->ssl3_enc/enc_method/g
Change-Id: I2b192507876aadd4f9310240687e562e56e6c0b1
Reviewed-on: https://boringssl-review.googlesource.com/2581
Reviewed-by: Adam Langley <agl@google.com>
Now SSLv23 and DTLS_ANY_VERSION share version-related helper functions.
ssl3_get_method is temporary until the method switch is no longer necessary.
Put them all together so there's one place to refactor them when we add a new
version or implement min_version/max_version controls.
Change-Id: Ic28a145cad22db08a87fdb854480b22886c451c6
Reviewed-on: https://boringssl-review.googlesource.com/2580
Reviewed-by: Adam Langley <agl@google.com>
Missed this one. It requires that we be able to change an SSL_METHOD after the
after, which complicates compiling the version locking into min_version /
max_version configurations.
Change-Id: I24ba54b7939360bbfafe3feb355a65840bda7611
Reviewed-on: https://boringssl-review.googlesource.com/2579
Reviewed-by: Adam Langley <agl@google.com>
SSL_ST_BEFORE isn't a possible state anymore. It seems this state meant the
side wasn't known, back in the early SSLeay days. Now upstream guesses
(sometimes incorrectly with generic methods), and we don't initialize until
later. SSL_shutdown also doesn't bother to call ssl3_shutdown at all if the
side isn't initialized and SSL_ST_BEFORE isn't the uninitialized state, which
seems a much more sensible arrangement.
Likewise, because bare SSL_ST_BEFOREs no longer exist, SSL_in_init implies
SSL_in_before and there is no need to check both.
Change-Id: Ie680838b2f860b895073dabb4d759996e21c2824
Reviewed-on: https://boringssl-review.googlesource.com/2564
Reviewed-by: Adam Langley <agl@google.com>
There's an undefined one not used anywhere. The others ought to be const. Also
move the forward declaration to ssl.h so we don't have to use the struct name.
Change-Id: I76684cf65255535c677ec19154cac74317c289ba
Reviewed-on: https://boringssl-review.googlesource.com/2561
Reviewed-by: Adam Langley <agl@google.com>
The ClientHello record is padded to 1024 bytes when
fastradio_padding is enabled. As a result, the 3G cellular radio
is fast forwarded to DCH (high data rate) state. This mechanism
leads to a substantial redunction in terms of TLS handshake
latency, and benefits mobile apps that are running on top of TLS.
Change-Id: I3d55197b6d601761c94c0f22871774b5a3dad614
It just inserts extra flushes everywhere and isn't used.
Change-Id: I082e4bada405611f4986ba852dd5575265854036
Reviewed-on: https://boringssl-review.googlesource.com/2456
Reviewed-by: Adam Langley <agl@google.com>
first_packet is a temporary connection-global flag set for the duration of some
call and then queried from other code. This kind of logic is too difficult to
reason through. It also incorrectly treats renegotiate ClientHellos as
pre-version-negotiation records. This eliminates the need to query
enc_write_ctx (which wasn't EVP_AEAD-aware anyway).
Instead, take a leaf from Go TLS's book and add a have_version bit. This is
placed on s->s3 as it is connection state; s->s3 automatically gets reset on
SSL_clear while s doesn't.
This new flag will also be used to determine whether to do the V2ClientHello
sniff when the version-locked methods merge into SSLv23_method. It will also
replace needing to condition s->method against a dummy DTLS_ANY_VERSION value
to determine whether DTLS version negotiation has happened yet.
Change-Id: I5c8bc6258b182ba4ab175a48a84eab6d3a001333
Reviewed-on: https://boringssl-review.googlesource.com/2442
Reviewed-by: Adam Langley <agl@google.com>
If SSL_clear is called before SSL_set_{connect,accept}_state (as SSL_new does
internally), s->state will get set prematurely. Likewise, s->server is set
based on the method's ssl_accept hook, but client SSL's may be initialized from
a generic SSL_METHOD too.
Since we can't easily get rid of the generic SSL_METHODs, defer s->state and
s->server initialization until the side is known.
Change-Id: I0972e17083df22a3c09f6f087011b54c699a22e7
Reviewed-on: https://boringssl-review.googlesource.com/2439
Reviewed-by: Adam Langley <agl@google.com>
