The documentation for |ECDSA_sign| and |ECDSA_verify| says that the
|type| parameter should be zero.
Change-Id: I875d3405455c5443f5a5a5c2960a9a9f486ca5bb
Reviewed-on: https://boringssl-review.googlesource.com/5832
Reviewed-by: Adam Langley <agl@google.com>
Estonian IDs issued between September 2014 to September 2015 are broken and use
negative moduli. They last five years and are common enough that we need to
work around this bug.
Add parallel "buggy" versions of BN_cbs2unsigned and RSA_parse_public_key which
tolerate this mistake, to align with OpenSSL's previous behavior. This code is
currently hooked up to rsa_pub_decode in RSA_ASN1_METHOD so that d2i_X509 is
tolerant. (This isn't a huge deal as the rest of that stack still uses the
legacy ASN.1 code which is overly lenient in many other ways.)
In future, when Chromium isn't using crypto/x509 and has more unified
certificate handling code, we can put client certificates under a slightly
different codepath, so this needn't hold for all certificates forever. Then in
September 2019, when the broken Estonian certificates all expire, we can purge
this codepath altogether.
BUG=532048
Change-Id: Iadb245048c71dba2eec45dd066c4a6e077140751
Reviewed-on: https://boringssl-review.googlesource.com/5894
Reviewed-by: Adam Langley <agl@google.com>
This gets the documentation into the ssl.h documentation, and removes
one of the circularly-dependent headers hanging off ssl.h. Also fixes
some typos; there were a few instances of "SSL *ctx".
Change-Id: I2a41c6f518f4780af84d468ed220fe7b0b8eb0d3
Reviewed-on: https://boringssl-review.googlesource.com/5883
Reviewed-by: Adam Langley <agl@google.com>
Also switch to the new variable names (SSL_CTX *ctx, SSL *ssl,
SSL_SESSION *session) for all documented functions.
Change-Id: I15e15a703b96af1727601108223c7ce3b0691f1d
Reviewed-on: https://boringssl-review.googlesource.com/5882
Reviewed-by: Adam Langley <agl@google.com>
To be consistent with some of the other headers and because SSL_METHOD
no longer has a place to anchor documentation, move the type
documentation up to the corresponding section headers, rather than
attached to a convenient function.
Also document thread-safety properties of SSL and SSL_CTX.
Change-Id: I7109d704d28dda3f5d83c72d86fe31bc302b816e
Reviewed-on: https://boringssl-review.googlesource.com/5876
Reviewed-by: Adam Langley <agl@google.com>
There was a bug in skipPast; it was skipping to the start of the string,
rather than the end of it. But more of an issue is that it would skip if
it was in the middle of the string, which caused problems when
STACK_OF(FOO) was used as a parameter.
At some point, we'll probably need to give this a real C declaration
parser. We still have declarations (like those that return function
pointers) which we can't parse. But for now let's clear the low-hanging
fruit.
Change-Id: Ic2cee452cc8cf6887a6ff1b00cea353cec361955
Reviewed-on: https://boringssl-review.googlesource.com/5875
Reviewed-by: Adam Langley <agl@google.com>
This is arguably more commonly queried connection information than the
tls-unique.
Change-Id: I1f080536153ba9f178af8e92cb43b03df37110b5
Reviewed-on: https://boringssl-review.googlesource.com/5874
Reviewed-by: Adam Langley <agl@google.com>
Just the stuff that has been pulled out into sections already.
Change-Id: I3da6bc61d79ccfe2b18d888075dc32026a656464
Reviewed-on: https://boringssl-review.googlesource.com/5873
Reviewed-by: Adam Langley <agl@google.com>
Unfortunately, these are also some of the worst APIs in the SSL stack.
I've tried to capture all the things they expose to the caller. 0 vs -1
is intentionally left unexpanded on for now. Upstream's documentation
says 0 means transport EOF, which is a nice idea but isn't true. (A lot
of random functions return 0 on error and pass it up to the caller.)
https://crbug.com/466303 tracks fixing that.
SSL_set_bio is intentionally documented to NOT be usable when they're
already configured. The function tries to behave in this case and even
with additional cases when |rbio| and/or |wbio| are unchanged, but this
is buggy. For instance, this will explode:
SSL_set_bio(ssl, bio1, bio1);
SSL_set_bio(ssl, bio2, SSL_get_wbio(ssl));
As will this, though it's less clear this is part of the API contract
due to SSL taking ownership.
SSL_set_bio(ssl, bio1, bio2);
SSL_set_bio(ssl, bio2, bio1);
It also tries to handle ssl->bbio already existing, but I doubt it quite
works. Hopefully we can drop ssl->bbio eventually. (Why is this so
complicated...)
Change-Id: I5f9f3043915bffc67e2ebd282813e04afbe076e6
Reviewed-on: https://boringssl-review.googlesource.com/5872
Reviewed-by: Adam Langley <agl@google.com>
Last set of changes didn't do that.
Change-Id: Iae24e75103529ce4d50099c5cbfbcef0e10ba663
Reviewed-on: https://boringssl-review.googlesource.com/5871
Reviewed-by: Adam Langley <agl@google.com>
clang scan-build found a memory leak if the overflow codepath in
dtls1_hm_fragment is hit. Along the way, tidy up that function.
Change-Id: I3c4b88916ee56ab3ab63f93d4a967ceae381d187
Reviewed-on: https://boringssl-review.googlesource.com/5870
Reviewed-by: Adam Langley <agl@google.com>
We were getting this because of C's defaults, but it's fragile to leave
it like this because someone may add another field at the end in the
future.
Change-Id: I8b2dcbbc7cee8062915d15101f99f5a1aae6ad87
Reviewed-on: https://boringssl-review.googlesource.com/5860
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
SSL_get_client_CA_list is one of those dreaded functions which may query either
configuration state or handshake state. Moreover, it does so based on
|ssl->server|, which may not be configured until later. Also check
|ssl->handshake_func| to make sure |ssl| is not in an indeterminate state.
This also fixes a bug where SSL_get_client_CA_list wouldn't work in DTLS due to
the incorrect |ssl->version| check.
Change-Id: Ie564dbfeecd2c8257fd6bcb148bc5db827390c77
Reviewed-on: https://boringssl-review.googlesource.com/5827
Reviewed-by: Adam Langley <agl@google.com>
Change-Id: Ifa44fef160fc9d67771eed165f8fc277f28a0222
Reviewed-on: https://boringssl-review.googlesource.com/5840
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
Using numbers is sensitive to moving things around. Instead, use the
names and enforce, for sections, that they are unique. Names would be
enforced too, but there's a table-of-contents bug around #ifdefs to
resolve first.
Change-Id: I8822e8ba8da9ed3ee4984365b8a64932d16d5baf
Reviewed-on: https://boringssl-review.googlesource.com/5826
Reviewed-by: Adam Langley <agl@google.com>
A small handful of functions got a 'Deprecated:' prefix instead in
documentation.
Change-Id: Ic151fb7d797514add66bc6465b6851b666a471bc
Reviewed-on: https://boringssl-review.googlesource.com/5825
Reviewed-by: Adam Langley <agl@google.com>
We had a few duplicate section names.
Change-Id: I0c9b2a1669ac14392fd577097d5ee8dd80f7c73c
Reviewed-on: https://boringssl-review.googlesource.com/5824
Reviewed-by: Adam Langley <agl@google.com>
It was checking algorithm_mac rather than algorithm_enc.
(Coincidentally, it gave the right answer if you compiled out the
ChaCha20 ciphers since SSL_AES128GCM and SSL_AEAD shared a value.)
Change-Id: I17047425ef7fabb98969144965d8db9528ef8497
Reviewed-on: https://boringssl-review.googlesource.com/5850
Reviewed-by: Adam Langley <agl@google.com>
The size of the stack caused by this object is problematic for systems
that have smaller stacks because they expect many threads.
Change-Id: Ib8f03741f9dd96bf474126f001947f879e50a781
Reviewed-on: https://boringssl-review.googlesource.com/5831
Reviewed-by: Matt Braithwaite <mab@google.com>
Reviewed-by: Adam Langley <agl@google.com>
It didn't do too much and I didn't notice that CRYPTO_sysrand wasn't
OPENSSL_EXPORTed, which makes the test impossible on shared-library
builds.
Change-Id: I38986572aa34fa9c0f30075d562b8ee4e1a0c8b8
There's not enough in that file to really justify its own file now.
Change-Id: I6130cfce6c40fe9d46aa83dd83e6f38d87fdcf64
Reviewed-on: https://boringssl-review.googlesource.com/5823
Reviewed-by: Adam Langley <agl@google.com>
Callers that lack hardware random may obtain a speed improvement by
calling |RAND_enable_fork_unsafe_buffering|, which enables a
thread-local buffer around reads from /dev/urandom.
Change-Id: I46e675d1679b20434dd520c58ece0f888f38a241
Reviewed-on: https://boringssl-review.googlesource.com/5792
Reviewed-by: Adam Langley <agl@google.com>
Quite a lot of consumers of the SSL stack will never need to touch files from
the SSL stack, but enough do that we can't just ditch them. Toss that all into
their own file so a static linker can drop it.
Change-Id: Ia07de939889eb09e3ab16aebcc1b6869ca8b75a0
Reviewed-on: https://boringssl-review.googlesource.com/5820
Reviewed-by: Adam Langley <agl@google.com>
History has shown there are bugs in not setting the error code
appropriately, which makes any decision making based on
|ERR_peek_last_error|, etc. suspect. Also, this call was interfering
with the link-time optimizer's ability to discard the implementations of
many functions in crypto/err during dead code elimination.
Change-Id: Iba9e553bf0a72a1370ceb17ff275f5a20fca31ec
Reviewed-on: https://boringssl-review.googlesource.com/5748
Reviewed-by: Adam Langley <agl@google.com>
Applications may require the stapled OCSP response in order to verify
the certificate within the verification callback.
Change-Id: I8002e527f90c3ce7b6a66e3203c0a68371aac5ec
Reviewed-on: https://boringssl-review.googlesource.com/5730
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
This change adds the ability to configure ciphers specifically for
TLS ≥ 1.0. This compliments the existing ability to specify ciphers
for TLS ≥ 1.1.
This is useful because TLS 1.0 is the first version not to suffer from
POODLE. (Assuming that it's implemented correctly[1].) Thus one might
wish to reserve RC4 solely for SSLv3.
[1] https://www.imperialviolet.org/2014/12/08/poodleagain.html
Change-Id: I774d5336fead48f03d8a0a3cf80c369692ee60df
Reviewed-on: https://boringssl-review.googlesource.com/5793
Reviewed-by: Adam Langley <agl@google.com>
This is useful to skip an optional element, and mirrors the behaviour of
CBS_get_optional_asn1_octet_string.
Change-Id: Icb538c5e99a1d4e46412cae3c438184a94fab339
Reviewed-on: https://boringssl-review.googlesource.com/5800
Reviewed-by: Adam Langley <agl@google.com>
SSL_CTX gets memset to zero, so many of the values needn't be explicitly
initialized.
Change-Id: I0e707a0dcc052cd6f0a5dc8d037400170bd75594
Reviewed-on: https://boringssl-review.googlesource.com/5812
Reviewed-by: Adam Langley <agl@google.com>
Since we're able to render it fancy, may as well.
Change-Id: Ia1ab4b7ad0cdd78c8ffb75342ee62365843e7d5f
Reviewed-on: https://boringssl-review.googlesource.com/5810
Reviewed-by: Adam Langley <agl@google.com>
There are a few things that differ in ways that are not source-compatible, so
it's probably worth documenting them.
Change-Id: I4ef26173a9347d9fd517c1b5215e08ced660b79d
Reviewed-on: https://boringssl-review.googlesource.com/5788
Reviewed-by: Adam Langley <agl@google.com>
setup_key_block is called when the first CCS resolves, but for resumptions this
is the incoming CCS (see ssl3_do_change_cipher_spec). Rather than set
need_record_splitting there, it should be set in the write case of
tls1_change_cipher_state.
This fixes a crash from the new record layer code in resumption when
record-splitting is enabled. Tweak the record-splitting tests to cover this
case.
This also fixes a bug where renego from a cipher which does require record
splitting to one which doesn't continues splitting. Since version switches are
not allowed, this can only happen after a renego from CBC to RC4.
Change-Id: Ie4e1b91282b10f13887b51d1199f76be4fbf09ad
Reviewed-on: https://boringssl-review.googlesource.com/5787
Reviewed-by: Adam Langley <agl@google.com>
Note that DTLS treats oversized ciphertexts different from everything else.
Change-Id: I71cba69ebce0debdfc96a7fdeb2666252e8d28ed
Reviewed-on: https://boringssl-review.googlesource.com/5786
Reviewed-by: Adam Langley <agl@google.com>
If the two extensions select different next protocols (quite possible since one
is server-selected and the other is client-selected), things will break. This
matches the behavior of NSS (Firefox) and Go.
Change-Id: Ie1da97bf062b91a370c85c12bc61423220a22f36
Reviewed-on: https://boringssl-review.googlesource.com/5780
Reviewed-by: Adam Langley <agl@google.com>
The maximum buffer size computation wasn't quite done right in
ssl_buffer.c, so we were failing with BUFFER_TOO_SMALL for sufficiently
large records. Fix this and, as penance, add 103 tests.
(Test that we can receive maximum-size records in all cipher suites.
Also test SSL_OP_MICROSOFT_BIG_SSLV3_BUFFER while I'm here.)
BUG=526998
Change-Id: I714c16dda2ed13f49d8e6cd1b48adc5a8491f43c
Reviewed-on: https://boringssl-review.googlesource.com/5785
Reviewed-by: Adam Langley <agl@google.com>
Don't dereference |d| when |top| is zero. Also test that various BIGNUM
methods behave correctly on zero/even inputs.
(Imported from upstream's cf633fa00244e39eea2f2c0b623f7d5bbefa904e.)
We already had the BN_div and BN_MONT_CTX_set tests, but align them with
upstream's for consistency.
Change-Id: Ice5d04f559b4d5672e23c400637c07d8ee401727
Reviewed-on: https://boringssl-review.googlesource.com/5783
Reviewed-by: Adam Langley <agl@google.com>
BN_rand generates a single-word zero BIGNUM with quite a large
probability.
A zero BIGNUM in turn will end up having a NULL |d|-buffer, which we
shouldn't dereference without checking.
(Imported from upstream's 9c989aaa749d88b63bef5d5beeb3046eae62d836.)
Change-Id: Ic4d113e4fcf4ea4c0a4e905a1c4ba3fb758d9fc6
Reviewed-on: https://boringssl-review.googlesource.com/5782
Reviewed-by: Adam Langley <agl@google.com>
If the seed value for dsa key generation is too short (< qsize),
return an error.
(Imported from upstream's 1d7df236dcb4f7c95707110753e5e77b19b9a0aa and
df1565ed9cebb6933ee7c6e762abcfefd1cd3846.)
This switches the trigger for random seed from seed_len = 0 to seed_in =
NULL.
Change-Id: I2e07abed754c57ef9d96b02a52ba6d260c3f5fb9
Reviewed-on: https://boringssl-review.googlesource.com/5781
Reviewed-by: Adam Langley <agl@google.com>
The bidi shutdown code uses type = 0 as a special signal value, but code
elsewhere doesn't account for this.
BUG=526437
Change-Id: I090cee421633d70ef3b84f4daa811608031b9ed9
Reviewed-on: https://boringssl-review.googlesource.com/5771
Reviewed-by: Adam Langley <agl@google.com>
Bidirectional shutdown doesn't make sense over DTLS; you can't reuse the
underlying channel after receiving close_notify because the channel is
unordered. This removes one caller of dtls1_read_bytes.
Really close_notify makes no sense in DTLS. It can't even protect
against some kind of truncation because it's all unordered. But continue
to send it in case anything is (unreliably since the channel is lossy)
relying on close_notify to signal some kind of session end. This only
makes SSL_shutdown stop trying to wait for one once we've already
decided to shut down the connection.
BUG=526437
Change-Id: I6afad7cb7209c4aba0b96f9246b04c81d90987a9
Reviewed-on: https://boringssl-review.googlesource.com/5770
Reviewed-by: Adam Langley <agl@google.com>
