They're completely unused now. The handshake message reassembly logic should
not depend on the state machine. This should partially free it up (ugly as it
is) to be shared with a future TLS 1.3 implementation while, in parallel, it
and the layers below, get reworked. This also cuts down on the number of states
significantly.
Partially because I expect we'd want to get ssl_hash_message_t out of there
too. Having it in common code is fine, but it needs to be in the (supposed to
be) protocol-agnostic handshake state machine, not the protocol-specific
handshake message layer.
Change-Id: I12f9dc57bf433ceead0591106ab165d352ef6ee4
Reviewed-on: https://boringssl-review.googlesource.com/7949
Reviewed-by: Adam Langley <agl@google.com>
This dates to SSLeay 0.8.0 (or earlier). The use counter sees virtually
no hits.
Change-Id: Iff4c8899d5cb0ba4afca113c66d15f1d980ffe41
Reviewed-on: https://boringssl-review.googlesource.com/6558
Reviewed-by: Adam Langley <agl@google.com>
Like tls1.h, ssl3.h is now just a bundle of protocol constants.
Hopefully we can opaquify this struct in due time, but for now it's
still public.
Change-Id: I68366eb233702e149c92e21297f70f8a4a45f060
Reviewed-on: https://boringssl-review.googlesource.com/6300
Reviewed-by: Adam Langley <alangley@gmail.com>
This dates all the way to SSLeay 0.9.0b. At this point the
application/handshake interleave logic in ssl3_read_bytes was already
present:
((
(s->state & SSL_ST_CONNECT) &&
(s->state >= SSL3_ST_CW_CLNT_HELLO_A) &&
(s->state <= SSL3_ST_CR_SRVR_HELLO_A)
) || (
(s->state & SSL_ST_ACCEPT) &&
(s->state <= SSL3_ST_SW_HELLO_REQ_A) &&
(s->state >= SSL3_ST_SR_CLNT_HELLO_A)
)
The comment is attached to SSL3_ST_SR_CLNT_HELLO_A, so I suspect this is
what it was about. This logic is gone now, so let's remove that scary
warning.
Change-Id: I45f13b53b79e35d80e6074b0942600434deb0684
Reviewed-on: https://boringssl-review.googlesource.com/6299
Reviewed-by: Adam Langley <alangley@gmail.com>
Applications may require the stapled OCSP response in order to verify
the certificate within the verification callback.
Change-Id: I8002e527f90c3ce7b6a66e3203c0a68371aac5ec
Reviewed-on: https://boringssl-review.googlesource.com/5730
Reviewed-by: David Benjamin <davidben@chromium.org>
Reviewed-by: Adam Langley <agl@google.com>
The handshake state machine is still rather messy (we should switch to CBB,
split the key exchanges apart, and also pull reading and writing out), but this
version makes it more obvious to the compiler that |p| and |sig_len| are
initialized. The old logic created a synchronous-only state which, if enterred
directly, resulted in some variables being uninitialized.
Change-Id: Ia3ac9397d523fe299c50a95dc82a9b26304cea96
Reviewed-on: https://boringssl-review.googlesource.com/5765
Reviewed-by: Adam Langley <agl@google.com>
Gets another field out of the SSL_SESSION.
Change-Id: I9a27255533f8e43e152808427466ec1306cfcc60
Reviewed-on: https://boringssl-review.googlesource.com/5756
Reviewed-by: Adam Langley <agl@google.com>
This begins decoupling the transport from the SSL state machine. The buffering
logic is hidden behind an opaque API. Fields like ssl->packet and
ssl->packet_length are gone.
ssl3_get_record and dtls1_get_record now call low-level tls_open_record and
dtls_open_record functions that unpack a single record independent of who owns
the buffer. Both may be called in-place. This removes ssl->rstate which was
redundant with the buffer length.
Future work will push the buffer up the stack until it is above the handshake.
Then we can expose SSL_open and SSL_seal APIs which act like *_open_record but
return a slightly larger enum due to other events being possible. Likewise the
handshake state machine will be detached from its buffer. The existing
SSL_read, SSL_write, etc., APIs will be implemented on top of SSL_open, etc.,
combined with ssl_read_buffer_* and ssl_write_buffer_*. (Which is why
ssl_read_buffer_extend still tries to abstract between TLS's and DTLS's fairly
different needs.)
The new buffering logic does not support read-ahead (removed previously) since
it lacks a memmove on ssl_read_buffer_discard for TLS, but this could be added
if desired. The old buffering logic wasn't quite right anyway; it tried to
avoid the memmove in some cases and could get stuck too far into the buffer and
not accept records. (The only time the memmove is optional is in DTLS or if
enough of the record header is available to know that the entire next record
would fit in the buffer.)
The new logic also now actually decrypts the ciphertext in-place again, rather
than almost in-place when there's an explicit nonce/IV. (That accidentally
switched in https://boringssl-review.googlesource.com/#/c/4792/; see
3d59e04bce96474099ba76786a2337e99ae14505.)
BUG=468889
Change-Id: I403c1626253c46897f47c7ae93aeab1064b767b2
Reviewed-on: https://boringssl-review.googlesource.com/5715
Reviewed-by: Adam Langley <agl@google.com>
This is a simpler implementation than OpenSSL's, lacking responder IDs
and request extensions support. This mirrors the client implementation
already present.
Change-Id: I54592b60e0a708bfb003d491c9250401403c9e69
Reviewed-on: https://boringssl-review.googlesource.com/5700
Reviewed-by: Adam Langley <agl@google.com>
I'm not sure why I made a separate one. (Not quite how the V2ClientHello
code will look in the buffer-free API yet. Probably the future
refactored SSL_HANDSHAKE gadget will need separate entry points to
consume a handshake message or V2ClientHello and the driver deals with
framing.)
This also means that ssl3_setup_read_buffer is never called external to
ssl3_read_n.
BUG=468889
Change-Id: I872f1188270968bf53ee9d0488a761c772a11e9e
Reviewed-on: https://boringssl-review.googlesource.com/5713
Reviewed-by: Adam Langley <agl@google.com>
Rather than support arbitrarily many handshake hashes in the general
case (which the PRF logic assumes is capped at two), special-case the
MD5/SHA1 two-hash combination and otherwise maintain a single rolling
hash.
Change-Id: Ide9475565b158f6839bb10b8b22f324f89399f92
Reviewed-on: https://boringssl-review.googlesource.com/5618
Reviewed-by: Adam Langley <agl@google.com>
A memory BIO is internally a BUF_MEM anyway. There's no need to bring
BIO_write into the mix. BUF_MEM is size_t clean.
Change-Id: I4ec6e4d22c72696bf47c95861771013483f75cab
Reviewed-on: https://boringssl-review.googlesource.com/5616
Reviewed-by: Adam Langley <agl@google.com>
The split was only needed for buffering records. Likewise, the extra
seq_num field is now unnecessary.
This also fixes a bug where dtls1_process_record will push an error on
the queue if the decrypted record is too large, which dtls1_get_record
will ignore but fail to clear, leaving garbage on the error queue. The
error is now treated as fatal; the reason DTLS silently drops invalid
packets is worrying about ease of DoS, but after SSL_AEAD_CTX_open, the
packet has been authenticated. (Unless it's the null cipher, but that's
during the handshake and the handshake is already DoS-able by breaking
handshake reassembly state.)
The function is still rather a mess. Later changes will clean this up.
BUG=468889
Change-Id: I96a54afe0755d43c34456f76e77fc4ee52ad01e3
Reviewed-on: https://boringssl-review.googlesource.com/5557
Reviewed-by: Adam Langley <agl@google.com>
The only point format that we ever support is uncompressed, which the
RFC says implementations MUST support. The TLS 1.3 and Curve25519
forecast is that point format negotiation is gone. Each curve has just
one point format and it's labeled, for historial reasons, as
"uncompressed".
Change-Id: I8ffc8556bed1127cf288d2a29671abe3c9b3c585
Reviewed-on: https://boringssl-review.googlesource.com/5542
Reviewed-by: Adam Langley <agl@google.com>
The RSA key exchange needs decryption and is still unsupported.
Change-Id: I8c13b74e25a5424356afbe6e97b5f700a56de41f
Reviewed-on: https://boringssl-review.googlesource.com/5467
Reviewed-by: Adam Langley <agl@google.com>
This change mirrors upstream's custom extension API because we have some
internal users that depend on it.
Change-Id: I408e442de0a55df7b05c872c953ff048cd406513
Reviewed-on: https://boringssl-review.googlesource.com/5471
Reviewed-by: Adam Langley <agl@google.com>
This also removes support for the “old” Channel ID extension.
Change-Id: I1168efb9365c274db6b9d7e32013336e4404ff54
Reviewed-on: https://boringssl-review.googlesource.com/5462
Reviewed-by: Adam Langley <agl@google.com>
This is certainly far from exhaustive, but get rid of these.
Change-Id: Ie96925bcd452873ed8399b68e1e71d63e5a0929b
Reviewed-on: https://boringssl-review.googlesource.com/5357
Reviewed-by: Adam Langley <agl@google.com>
The SSL23_ST_foo macros are only used in ssl_stat.c.
However, these states are never set and can be removed.
Move the two remaining SSLv2 client hello record macros to ssl3.h
Change-Id: I76055405a9050cf873b4d1cbc689e54dd3490b8a
Reviewed-on: https://boringssl-review.googlesource.com/4160
Reviewed-by: Adam Langley <agl@google.com>
Rather than four massive functions that handle every extension,
organise the code by extension with four smaller functions for each.
Change-Id: I876b31dacb05aca9884ed3ae7c48462e6ffe3b49
Reviewed-on: https://boringssl-review.googlesource.com/5142
Reviewed-by: Adam Langley <agl@google.com>
This adds a new API, SSL_set_private_key_method, which allows the consumer to
customize private key operations. For simplicity, it is incompatible with the
multiple slots feature (which will hopefully go away) but does not, for now,
break it.
The new method is only routed up for the client for now. The server will
require a decrypt hook as well for the plain RSA key exchange.
BUG=347404
Change-Id: I35d69095c29134c34c2af88c613ad557d6957614
Reviewed-on: https://boringssl-review.googlesource.com/5049
Reviewed-by: Adam Langley <agl@google.com>
We shouldn't have protocol constraints that are sensitive to whether
data is returned synchronously or not.
Per https://boringssl-review.googlesource.com/#/c/4112/, the original
limitation was to avoid OpenSSL ABI changes. This is no longer a
concern.
Add tests for the sync and async case. Send the empty records in two
batches to ensure the count is reset correctly.
Change-Id: I3fee839438527e71adb83d437879bb0d49ca5c07
Reviewed-on: https://boringssl-review.googlesource.com/5040
Reviewed-by: Adam Langley <agl@google.com>
When the peer or caller requests a renegotiation, OpenSSL doesn't
renegotiate immediately. It sets a flag to begin a renegotiation as soon
as record-layer read and write buffers are clear. One reason is that
OpenSSL's record layer cannot write a handshake record while an
application data record is being written. The buffer consistency checks
around partial writes will break.
None of these cases are relevant for the client auth hack. We already
require that renego come in at a quiescent part of the application
protocol by forbidding handshake/app_data interleave.
The new behavior is now: when a HelloRequest comes in, if the record
layer is not idle, the renegotiation is rejected as if
SSL_set_reject_peer_renegotiations were set. Otherwise we immediately
begin the new handshake. The server may not send any application data
between HelloRequest and completing the handshake. The HelloRequest may
not be consumed if an SSL_write is pending.
Note this does require that Chromium's HTTP stack not attempt to read
the HTTP response until the request has been written, but the
renegotiation logic already assumes it. Were Chromium to drive the
SSL_read state machine early and the server, say, sent a HelloRequest
after reading the request headers but before we've sent the whole POST
body, the SSL state machine may racily enter renegotiate early, block
writing the POST body on the new handshake, which would break Chromium's
ERR_SSL_CLIENT_AUTH_CERT_NEEDED plumbing.
BUG=429450
Change-Id: I6278240c3bceb5d2e1a2195bdb62dd9e0f4df718
Reviewed-on: https://boringssl-review.googlesource.com/4825
Reviewed-by: Adam Langley <agl@google.com>
tls1_enc is now SSL_AEAD_CTX_{open,seal}. This starts tidying up a bit
of the record-layer logic. This removes rr->input, as encrypting and
decrypting records no longer refers to various globals. It also removes
wrec altogether. SSL3_RECORD is now only used to maintain state about
the current incoming record. Outgoing records go straight to the write
buffer.
This also removes the outgoing alignment memcpy and simply calls
SSL_AEAD_CTX_seal with the parameters as appropriate. From bssl speed
tests, this seems to be faster on non-ARM and a bit of a wash on ARM.
Later it may be worth recasting these open/seal functions to write into
a CBB (tweaked so it can be malloc-averse), but for now they take an
out/out_len/max_out trio like their EVP_AEAD counterparts.
BUG=468889
Change-Id: Ie9266a818cc053f695d35ef611fd74c5d4def6c3
Reviewed-on: https://boringssl-review.googlesource.com/4792
Reviewed-by: Adam Langley <agl@google.com>
There's multiple different versions of this check, between
s->s3->have_version (only works at some points), s->new_session (really
weird and not actually right), s->renegotiate (fails on the server
because it's always 2 after ClientHello), and s->s3->tmp.finish_md_len
(super confusing). Add an explicit bit with clear meaning. We'll prune
some of the others later; notably s->renegotiate can go away when
initiating renegotiation is removed.
This also tidies up the extensions to be consistent about whether
they're allowed during renego:
- ALPN failed to condition when accepting from the server, so even
if the client didn't advertise, the server could.
- SCTs now *are* allowed during renego. I think forbidding it was a
stray copy-paste. It wasn't consistently enforced in both ClientHello
and ServerHello, so the server could still supply it. Moreover, SCTs
are part of the certificate, so we should accept it wherever we accept
certificates, otherwise that session's state becomes incomplete. This
matches OCSP stapling. (NB: Chrome will never insert a session created
on renego into the session cache and won't accept a certificate
change, so this is moot anyway.)
Change-Id: Ic9bd1ebe2a2dbe75930ed0213bf3c8ed8170e251
Reviewed-on: https://boringssl-review.googlesource.com/4730
Reviewed-by: Adam Langley <agl@google.com>
The only difference is SSL_clear_num_renegotiations which is never
called.
Change-Id: Id661c71e89d34d834349ad1f1a296e332606e6cc
Reviewed-on: https://boringssl-review.googlesource.com/4564
Reviewed-by: Adam Langley <agl@google.com>
Compression is gone, so don't allow for compression overhead. With that fixed,
the second rr->length check in ssl3_get_record matches the length computation
which sizes the read buffer. The first is wrong and doesn't account for the
alignment padding. Move the second to the first.
Change-Id: I3f4f05de9fdf5c645ff24493bbfdf303dcc1aa90
Reviewed-on: https://boringssl-review.googlesource.com/4236
Reviewed-by: Adam Langley <agl@google.com>
Separate actually writing the fragment to the network from assembling it so
there is no need for is_fragment. record_split_done also needn't be a global;
as of 7fdeaf1101, it is always reset to 0 whether
or not SSL3_WANT_WRITE occurred, despite the comment.
I believe this is sound, but the pre-7fdeaf1 logic wasn't quiiite right;
ssl3_write_pending allows a retry to supply *additional* data, so not all
plaintext had been commited to before the IV was randomized. We could fix this
by tracking how many bytes were committed to the last time we fragmented, but
this is purely an optimization and doesn't seem worth the complexity.
This also fixes the alignment computation in the record-splitting case. The
extra byte was wrong, as demonstrated by the assert.
Change-Id: Ia087a45a6622f4faad32e501942cc910eca1237b
Reviewed-on: https://boringssl-review.googlesource.com/4234
Reviewed-by: Adam Langley <agl@google.com>
It happens to give the same value anyway (64 + 16), but only on accident.
Change-Id: I1415f4015e3de472dbeb9ada0d92607c9d1bcd40
Reviewed-on: https://boringssl-review.googlesource.com/3780
Reviewed-by: Adam Langley <agl@google.com>
False Start is the name it's known by now. Deprecate the old API and expose new
ones with the new name.
Change-Id: I32d307027e178fd7d9c0069686cc046f75fdbf6f
Reviewed-on: https://boringssl-review.googlesource.com/3481
Reviewed-by: Adam Langley <agl@google.com>
I found no users of this. We can restore it if needbe, but I don't expect
anyone to find it useful in its current form. The API is suspect for the same
reasons DTLSv1_listen was. An SSL object is stateful and assumes you already
have the endpoint separated out.
If we ever need it, server-side HelloVerifyRequest and DTLSv1_listen should be
implemented by a separate stateless listener that statelessly handles
cookieless ClientHello + HelloVerifyRequest. Once a ClientHello with a valid
cookie comes in, it sets up a stateful SSL object and passes control along to
that.
Change-Id: I86adc1dfb6a81bebe987784c36ad6634a9a1b120
Reviewed-on: https://boringssl-review.googlesource.com/3480
Reviewed-by: Adam Langley <agl@google.com>
This makes the following changes:
- SSL_cutthrough_complete no longer rederives whether cutthrough happened and
just maintains a handshake bit.
- SSL_in_init no longer returns true if we are False Starting but haven't
completed the handshake. That logic was awkward as it depended on querying
in_read_app_data to force SSL_read to flush the entire handshake. Defaulting
SSL_in_init to continue querying the full handshake and special-casing
SSL_write is better. E.g. the check in bidirectional SSL_shutdown wants to know
if we're in a handshake. No internal consumer of
SSL_MODE_HANDSHAKE_CUTTHROUGH ever queries SSL_in_init directly.
- in_read_app_data is gone now that the final use is dead.
Change-Id: I05211a116d684054dfef53075cd277b1b30623b5
Reviewed-on: https://boringssl-review.googlesource.com/3336
Reviewed-by: Adam Langley <agl@google.com>
Since we can't update wpa_supplicant nearly as fast as we would like, we
need to try and keep it happy. Unfortunately, the recent switch to
EVP_AEAD breaks it so this dismal change adds some dummy variables that
will allow it to compile.
Change-Id: I03d6b81c30bbebc07af3af0d6cda85a26b461edf
Reviewed-on: https://boringssl-review.googlesource.com/2960
Reviewed-by: Adam Langley <agl@google.com>
The EVP_CIPHER codepath should no longer be used with TLS. It still exists for
DTLS and SSLv3. The AEAD construction in TLS does not allow for
variable-overhead AEADs, so stateful AEADs do not include the length in the ad
parameter. Rather the AEADs internally append the unpadded length once it is
known. EVP_aead_rc4_md5_tls is modified to account for this.
Tests are added (and RC4-MD5's regenerated) for each of the new AEADs. The
cipher tests are all moved into crypto/cipher/test because there's now a lot of
them and they clutter the directory listing.
In ssl/, the stateful AEAD logic is also modified to account for stateful AEADs
with a fixed IV component, and for AEADs which use a random nonce (for the
explicit-IV CBC mode ciphers).
The new implementation fixes a bug/quirk in stateless CBC mode ciphers where
the fixed IV portion of the keyblock was generated regardless. This is at the
end, so it's only relevant for EAP-TLS which generates a MSK from the end of
the key block.
Change-Id: I2d8b8aa11deb43bde2fd733f4f90b5d5b8cb1334
Reviewed-on: https://boringssl-review.googlesource.com/2692
Reviewed-by: Adam Langley <agl@google.com>
Tested manually by replacing SSLv23_method() with TLSv1_2_method() in
bssl_shim. This is a large chunk of code which is not run in SSLv23_method(),
but it will be run after unification. It's split out separately to ease review.
Change-Id: I6bd241daca17aa0f9b3e36e51864a29755a41097
Some code predated the RFCs themselves, but the RFCs now exist. Also remove
now obsolete comments and some unused #defines.
See upstream's cffeacd91e70712c99c431bf32a655fa1b561482. (Though this predates
it; I just remembered I never uploaded it.)
Change-Id: I5e56f0ab6b7f558820f72e84dfdbc71a8c23cb91
Reviewed-on: https://boringssl-review.googlesource.com/2475
Reviewed-by: Adam Langley <agl@google.com>
first_packet is a temporary connection-global flag set for the duration of some
call and then queried from other code. This kind of logic is too difficult to
reason through. It also incorrectly treats renegotiate ClientHellos as
pre-version-negotiation records. This eliminates the need to query
enc_write_ctx (which wasn't EVP_AEAD-aware anyway).
Instead, take a leaf from Go TLS's book and add a have_version bit. This is
placed on s->s3 as it is connection state; s->s3 automatically gets reset on
SSL_clear while s doesn't.
This new flag will also be used to determine whether to do the V2ClientHello
sniff when the version-locked methods merge into SSLv23_method. It will also
replace needing to condition s->method against a dummy DTLS_ANY_VERSION value
to determine whether DTLS version negotiation has happened yet.
Change-Id: I5c8bc6258b182ba4ab175a48a84eab6d3a001333
Reviewed-on: https://boringssl-review.googlesource.com/2442
Reviewed-by: Adam Langley <agl@google.com>
It's unused. Also per the previous commit message, it historically had a bug
anyway.
Change-Id: I5868641e7938ddebbc0ffd72d218c81cd17c7739
Reviewed-on: https://boringssl-review.googlesource.com/2437
Reviewed-by: Adam Langley <agl@google.com>
Prior to this change, BoringSSL maintained a 2-byte buffer for alerts,
and would support reassembly of fragmented alerts.
NSS does not support fragmented alerts, nor would any reasonable
implementation produce them. Remove fragmented alert handling and
produce an error if a fragmented alert has ever been encountered.
Change-Id: I31530ac372e8a90b47cf89404630c1c207cfb048
Reviewed-on: https://boringssl-review.googlesource.com/2125
Reviewed-by: Adam Langley <agl@google.com>
There's not much point in retaining the identity hint in the SSL_SESSION. This
avoids the complexity around setting psk_identity hint on either the SSL or the
SSL_SESSION. Introduce a peer_psk_identity_hint for the client to store the one
received from the server.
This changes the semantics of SSL_get_psk_identity_hint; it now only returns
the value configured for the server. The client learns the hint through the
callback. This is compatible with the one use of this API in conscrypt (it
pulls the hint back out to pass to a callback).
Change-Id: I6d9131636b47f13ac5800b4451436a057021054a
Reviewed-on: https://boringssl-review.googlesource.com/2213
Reviewed-by: Adam Langley <agl@google.com>
This is an experimental flag that dates back to SSLeay 0.8.1b or earlier. It's
never set internally and never set in consumers.
Change-Id: I922583635c9f3d8d93f08f1707531ad22a26ae6a
Reviewed-on: https://boringssl-review.googlesource.com/2214
Reviewed-by: Adam Langley <agl@google.com>
There's no need to store them on the session. They're temporary handshake
state and weren't serialized in d2i_SSL_SESSION anyway.
Change-Id: I830d378ab49aaa4fc6c4c7a6a8c035e2263fb763
Reviewed-on: https://boringssl-review.googlesource.com/1990
Reviewed-by: Adam Langley <agl@google.com>
Update SSL_OP_ALL to account for SSL_OP_CRYPTOPRO_TLSEXT_BUG being gone,
and update ssl3_setup_write_buffer to account for SSL_MODE_CBC_RECORD_SPLITTING
rather than the now defunct SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS.
Also remove SSL_OP_TLS_BLOCK_PADDING_BUG. This is to allow for a buggy peer
which pads CBC with N bytes of value N rather than N+1 bytes of value N. This
quirk has been broken since CBC padding checks became constant-time, as
demonstrated by this attempt at a test. (Instead of just decrementing
padding_length, it needs to also keep track of a separate padding_value and not
decrement that one.)
https://boringssl-review.googlesource.com/#/c/1690/
(The quirk would also fall over anyway if the buggy client ever did a session
resumption; then the server speaks first rather than the client, and the quirk
triggered on reading the first encrypted record from the peer.)
Change-Id: I19942dc629a47832aead77a46bb50e0b0a9780b3
Reviewed-on: https://boringssl-review.googlesource.com/1694
Reviewed-by: Adam Langley <agl@google.com>
Remove the old implementation which was excessively general. This mirrors the
SCT support and adds a single boolean flag to request an OCSP response with no
responder IDs, extensions, or frills. The response, if received, is stored on
the SSL_SESSION so that it is available for (re)validation on session
resumption; Chromium revalidates the saved auth parameters on resume.
Server support is unimplemented for now. This API will also need to be adjusted
in the future if we implement RFC 6961.
Change-Id: I533c029b7f7ea622d814d05f934fdace2da85cb1
Reviewed-on: https://boringssl-review.googlesource.com/1671
Reviewed-by: Adam Langley <agl@google.com>
